e: 'ttyS1': device_add <7>driver: 'atmel_usart.1': driver_bound: bound to device 'atmel_usart' <7>bus: 'platform': really_probe: bound device atmel_usart.1 to driver atmel_usart <7>device: 'ram0': device_add <7>device: '1:0': device_add <7>device: 'ram1': device_add <7>device: '1:1': device_add <7>device: 'ram2': device_add <7>device: '1:2': device_add <7>device: 'ram3': device_add <7>device: '1:3': device_add <7>device: 'ram4': device_add <7>device: '1:4': device_add <7>device: 'ram5': device_add <7>device: '1:5': device_add <7>device: 'ram6': device_add <7>device: '1:6': device_add <7>device: 'ram7': device_add <7>device: '1:7': device_add <7>device: 'ram8': device_add <7>device: '1:8': device_add <7>device: 'ram9': device_add <7>device: '1:9': device_add <7>device: 'ram10': device_add <7>device: '1:10': device_add <7>device: 'ram11': device_add <7>device: '1:11': device_add <7>device: 'ram12': device_add <7>device: '1:12': device_add <7>device: 'ram13': device_add <7>device: '1:13': device_add <7>device: 'ram14': device_add <7>device: '1:14': device_add <7>device: 'ram15': device_add <7>device: '1:15': device_add <6>brd: module loaded <7>device: 'loop0': device_add <7>device: '7:0': device_add <7>device: 'loop1': device_add <7>device: '7:1': device_add <7>device: 'loop2': device_add <7>device: '7:2': device_add <7>device: 'loop3': device_add <7>device: '7:3': device_add <7>device: 'loop4': device_add <7>device: '7:4': device_add <7>device: 'loop5': device_add <7>device: '7:5': device_add <7>device: 'loop6': device_add <7>device: '7:6': device_add <7>device: 'loop7': device_add <7>device: '7:7': device_add <6>loop: module loaded <7>bus: 'platform': add driver ssc <7>bus: 'platform': remove driver ssc <7>driver: 'ssc': driver_release <7>device class 'scsi_disk': registering <4>Driver 'sd' needs updating - please use bus_type methods <7>bus: 'scsi': add driver sd <7>bus: 'platform': add driver macb <7>bus: 'platform': driver_probe_device: matched device macb with driver macb <7>bus: 'platform': really_probe: probing driver macb with device macb <7>device: 'eth0': device_add <7>device: 'ffffffff': device_add <7>device: 'ffffffff:00': device_add <7>bus: 'mdio_bus': add device ffffffff:00 <6>MACB_mii_bus: probed <7>driver: 'ffffffff:00': driver_bound: bound to device 'Generic PHY' <6>eth0: Atmel MACB at 0xfffbc000 irq 21 (00:00:52:c2:55:b0) <6>eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, irq=-1) <7>driver: 'macb': driver_bound: bound to device 'macb' <7>bus: 'platform': really_probe: bound device macb to driver macb <7>device class 'mtd': registering <7>bus: 'platform': add driver physmap-flash <7>Registering platform device 'physmap-flash.0'. Parent at platform <7>device: 'physmap-flash.0': device_add <7>bus: 'platform': add device physmap-flash.0 <7>bus: 'platform': driver_probe_device: matched device physmap-flash.0 with driver physmap-flash <7>bus: 'platform': really_probe: probing driver physmap-flash with device physmap-flash.0 <5>physmap platform flash device: 02000000 at 10000000 <6>physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank <4> Amd/Fujitsu Extended Query Table at 0x0040 <4>physmap-flash.0: CFI does not contain boot bank location. Assuming top. <5>number of CFI chips: 1 <5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. <3>mtd: no mtd-id <5>6 cmdlinepart partitions found on MTD device physmap-flash.0 <5>Creating 6 MTD partitions on "physmap-flash.0": <5>0x000000000000-0x000000020000 : "bootstrap" <7>device: 'mtd0': device_add <7>device: 'mtd0ro': device_add <7>device: 'mtdblock0': device_add <7>device: '31:0': device_add <5>0x000000020000-0x000000060000 : "uboot" <7>device: 'mtd1': device_add <7>device: 'mtd1ro': device_add <7>device: 'mtdblock1': device_add <5>0x000000060000-0x000000080000 : "env1" <7>device: 'mtd2': device_add <7>device: 'mtd2ro': device_add <7>device: 'mtdblock2': device_add <5>0x000000080000-0x0000000a0000 : "env2" <7>device: 'mtd3': device_add <7>device: 'mtd3ro': device_add <7>device: 'mtdblock3': device_add <5>0x0000000a0000-0x000000360000 : "linux" <7>device: 'mtd4': device_add <7>device: 'mtd4ro': device_add <7>device: 'mtdblock4': device_add <5>0x000000360000-0x000002000000 : "root" <7>device: 'mtd5': device_add <7>device: 'mtd5ro': device_add <7>device: 'mtdblock5': device_add <7>driver: 'physmap-flash.0': driver_bound: bound to device 'physmap-flash' <7>bus: 'platform': really_probe: bound device physmap-flash.0 to driver physmap-flash <7>bus: 'platform': add driver atmel_spi <7>bus: 'platform': driver_probe_device: matched device atmel_spi.0 with driver atmel_spi <7>bus: 'platform': really_probe: probing driver atmel_spi with device atmel_spi.0 <6>atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffa4000 (irq 14) <7>device: 'spi0': device_add <7>atmel_spi atmel_spi.0: registered master spi0 <7>spi spi0.3: setup: 1999191 Hz bpw 8 mode 0x0 -> csr3 00003202 <7>device: 'spi0.3': device_add <7>bus: 'spi': add device spi0.3 <7>atmel_spi atmel_spi.0: registered child spi0.3 <7>driver: 'atmel_spi.0': driver_bound: bound to device 'atmel_spi' <7>bus: 'platform': really_probe: bound device atmel_spi.0 to driver atmel_spi <7>device class 'uwb_rc': registering <7>bus: 'usb': add driver hwa-rc <6>usbcore: registered new interface driver hwa-rc <7>device class 'usbmon': registering <7>device: 'usbmon0': device_add <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <7>ohci_hcd: block sizes: ed 64 td 64 <7>bus: 'platform': add driver at91_ohci <7>bus: 'platform': driver_probe_device: matched device at91_ohci with driver at91_ohci <7>bus: 'platform': really_probe: probing driver at91_ohci with device at91_ohci <7>at91_ohci at91_ohci: start <6>at91_ohci at91_ohci: AT91 OHCI <7>device: 'usb_host1': device_add <7>drivers/usb/core/inode.c: creating file 'devices' <7>drivers/usb/core/inode.c: creating file '001' <7>device: 'usbmon1': device_add <6>at91_ohci at91_ohci: new USB bus registered, assigned bus number 1 <7>at91_ohci at91_ohci: supports USB remote wakeup <6>at91_ohci at91_ohci: irq 29, io mem 0x00a00000 <7>at91_ohci at91_ohci: created debug files <7>at91_ohci at91_ohci: OHCI controller state <7>at91_ohci at91_ohci: OHCI 1.0, NO legacy support registers <7>at91_ohci at91_ohci: control 0x083 HCFS=operational CBSR=3 <7>at91_ohci at91_ohci: cmdstatus 0x00000 SOC=0 <7>at91_ohci at91_ohci: intrstatus 0x00000004 SF <7>at91_ohci at91_ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>at91_ohci at91_ohci: hcca frame #0005 <7>at91_ohci at91_ohci: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2) <7>at91_ohci at91_ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>at91_ohci at91_ohci: roothub.status 00008000 DRWE <7>at91_ohci at91_ohci: roothub.portstatus [0] 0x00000100 PPS <7>at91_ohci at91_ohci: roothub.portstatus [1] 0x00000100 PPS <7>usb usb1: default language 0x0409 <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: AT91 OHCI <6>usb usb1: Manufacturer: Linux 2.6.30 ohci_hcd <6>usb usb1: SerialNumber: at91 <7>device: 'usb1': device_add <7>bus: 'usb': add device usb1 <7>usb usb1: uevent <7>bus: 'usb': driver_probe_device: matched device usb1 with driver usb <7>bus: 'usb': really_probe: probing driver usb with device usb1 <7>usb usb1: usb_probe_device <6>usb usb1: configuration #1 chosen from 1 choice <7>usb usb1: adding 1-0:1.0 (config #1, interface 0) <7>device: '1-0:1.0': device_add <7>bus: 'usb': add device 1-0:1.0 <7>usb 1-0:1.0: uevent <7>bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub <7>bus: 'usb': really_probe: probing driver hub with device 1-0:1.0 <7>hub 1-0:1.0: usb_probe_interface <7>hub 1-0:1.0: usb_probe_interface - got id <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <7>hub 1-0:1.0: standalone hub <7>hub 1-0:1.0: no power switching (usb 1.0) <7>hub 1-0:1.0: no over-current protection <7>hub 1-0:1.0: power on to power good time: 4ms <7>hub 1-0:1.0: local power source is good <7>hub 1-0:1.0: trying to enable port power on non-switchable hub <7>driver: '1-0:1.0': driver_bound: bound to device 'hub' <7>bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub <7>device class 'usb_endpoint': registering <7>device: 'usbdev1.1_ep81': device_add <7>device: 'usbdev1.1': device_add <7>drivers/usb/core/inode.c: creating file '001' <7>driver: 'usb1': driver_bound: bound to device 'usb' <7>bus: 'usb': really_probe: bound device usb1 to driver usb <7>device: 'usbdev1.1_ep00': device_add <7>driver: 'at91_ohci': driver_bound: bound to device 'at91_ohci' <7>bus: 'platform': really_probe: bound device at91_ohci to driver at91_ohci <7>bus: 'usb': add driver hwa-hc <6>usbcore: registered new interface driver hwa-hc <6>Initializing USB Mass Storage driver... <7>bus: 'usb': add driver usb-storage <6>usbcore: registered new interface driver usb-storage <6>USB Mass Storage support registered. <7>bus: 'usb-serial': registered <7>bus: 'usb': add driver usbserial <6>usbcore: registered new interface driver usbserial <6>usbserial: USB Serial Driver core <7>bus: 'usb-serial': add driver aircable <6>USB Serial support registered for aircable <7>bus: 'usb': add driver aircable <6>usbcore: registered new interface driver aircable <7>bus: 'platform': add driver at91_udc <7>bus: 'platform': driver_probe_device: matched device at91_udc with driver at91_udc <7>bus: 'platform': really_probe: probing driver at91_udc with device at91_udc <7>device: 'gadget': device_add <6>udc: at91_udc version 3 May 2006 <7>driver: 'at91_udc': driver_bound: bound to device 'at91_udc' <7>bus: 'platform': really_probe: bound device at91_udc to driver at91_udc <7>zero gadget: adding config #3 'source/sink'/c030f0e0 <7>zero gadget: adding 'source/sink'/c1d1c120 to config 'source/sink'/c030f0e0 <7>zero gadget: full speed source/sink: IN/ep1, OUT/ep2 <7>zero gadget: cfg 3/c030f0e0 speeds: full/low <7>zero gadget: interface 0 = source/sink/c1d1c120 <7>zero gadget: adding config #2 'loopback'/c030f06c <7>zero gadget: adding 'loopback'/c1d1c0c0 to config 'loopback'/c030f06c <7>zero gadget: full speed loopback: IN/ep1, OUT/ep2 <7>zero gadget: cfg 2/c030f06c speeds: full/low <7>zero gadget: interface 0 = loopback/c1d1c0c0 <6>zero gadget: Gadget Zero, version: Cinco de Mayo 2008 <6>zero gadget: zero ready <7>udc: active <7>udc: bound to zero <7>device: 'mice': device_add <6>mice: PS/2 mouse device common for all mice <7>bus: 'spi': add driver ads7846 <7>bus: 'spi': driver_probe_device: matched device spi0.3 with driver ads7846 <7>bus: 'spi': really_probe: probing driver ads7846 with device spi0.3 <7>ads7846 spi0.3: DEactivate 75, mr 000f0011 <7>ads7846 spi0.3: setup: 1999191 Hz bpw 8 mode 0x0 -> csr3 00003202 <6>ads7846 spi0.3: touchscreen, irq 31 <7>atmel_spi atmel_spi.0: new message c1d9f808 submitted for spi0.3 <7>atmel_spi atmel_spi.0: start message c1d9f808 for spi0.3 <7>ads7846 spi0.3: activate 75, mr 000e0011 <7>ads7846 spi0.3: start xfer c1d9f87c: len 1 tx c1d9f801/21d9f801 rx (null)/ffffffff <7>ads7846 spi0.3: next xfer c1d9f8a0: len 2 tx (null)/ffffffff rx c1d9f806/21d9f806 <7>ads7846 spi0.3: next xfer c1d9f8c4: len 1 tx c1d9f802/21d9f802 rx (null)/ffffffff <7>ads7846 spi0.3: next xfer c1d9f8e8: len 2 tx (null)/ffffffff rx c1d9f804/21d9f804 <7>ads7846 spi0.3: DEactivate 75, mr 000e0011 <7>atmel_spi atmel_spi.0: xfer complete: 6 bytes transferred <7>device: 'input0': device_add <6>input: ADS784x Touchscreen as /class/input/input0 <7>device: 'mouse0': device_add <7>device: 'event0': device_add <7>evbug.c: Connected device: input0 (ADS784x Touchscreen at spi0.3/input0) <7>driver: 'spi0.3': driver_bound: bound to device 'ads7846' <7>bus: 'spi': really_probe: bound device spi0.3 to driver ads7846 <7>bus: 'platform': add driver rtc-at91sam9 <7>driver: 'at91_rtt.0': driver_bound: bound to device 'rtc-at91sam9' <7>device: 'rtc0': device_add <6>rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0 <4>IRQ 1/rtc0: IRQF_DISABLED is not guaranteed on shared IRQs <4>rtc-at91sam9 at91_rtt.0: rtc0: SET TIME! <6>Bluetooth: Generic Bluetooth USB driver ver 0.5 <4> <4>btusb_init <7>bus: 'usb': add driver btusb <7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 <6>usbcore: registered new interface driver btusb <6>TCP cubic registered <6>NET: Registered protocol family 17 <6>Bluetooth: L2CAP ver 2.13 <6>Bluetooth: L2CAP socket layer initialized <6>Bluetooth: SCO (Voice Link) ver 0.6 <6>Bluetooth: SCO socket layer initialized <6>Bluetooth: RFCOMM socket layer initialized <6>Bluetooth: RFCOMM TTY layer initialized <6>Bluetooth: RFCOMM ver 1.11 <7>device: 'cpu_dma_latency': device_add <7>device: 'network_latency': device_add <7>device: 'network_throughput': device_add <3>rtc-at91sam9 at91_rtt.0: hctosys: unable to read the hardware clock <4>VFS: Mounted root (jffs2 filesystem) on device 31:5. <6>Freeing init memory: 148K <7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004 <7>at91_ohci at91_ohci: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS <7>hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s <7>at91_ohci at91_ohci: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS <7>hub 1-0:1.0: debounce: port 2: total 125ms stable 100ms status 0x101 <7>at91_ohci at91_ohci: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS <6>usb 1-2: new full speed USB device using at91_ohci and address 2 <7>at91_ohci at91_ohci: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS <6>eth0: link up (100/Full) <7>usb 1-2: ep0 maxpacket = 16 <7>usb 1-2: default language 0x0409 <6>usb 1-2: New USB device found, idVendor=1131, idProduct=1001 <6>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 1-2: Product: ISSCEDRBTA <6>usb 1-2: Manufacturer: ISSC <7>device: '1-2': device_add <7>bus: 'usb': add device 1-2 <7>usb 1-2: uevent <7>bus: 'usb': driver_probe_device: matched device 1-2 with driver usb <7>bus: 'usb': really_probe: probing driver usb with device 1-2 <7>usb 1-2: usb_probe_device <6>usb 1-2: configuration #1 chosen from 1 choice <7>usb 1-2: adding 1-2:1.0 (config #1, interface 0) <7>device: '1-2:1.0': device_add <7>bus: 'usb': add device 1-2:1.0 <7>usb 1-2:1.0: uevent <7>bus: 'usb': driver_probe_device: matched device 1-2:1.0 with driver btusb <7>bus: 'usb': really_probe: probing driver btusb with device 1-2:1.0 <7>btusb 1-2:1.0: usb_probe_interface <7>btusb 1-2:1.0: usb_probe_interface - got id <4> <4>btusb_probe: call <4>btusb_probe: intf->cur_altsetting->desc.bInterfaceNumber => 0 <4>btusb_probe: driver_info <4> <4>btusb_probe: continue 1 <4> <4>btusb_probe: continue 2 <4> <4>btusb_probe: continue 3 <7>device: 'hci0': device_add <4> <4>btusb_probe: return <7>driver: '1-2:1.0': driver_bound: bound to device 'btusb' <7>bus: 'usb': really_probe: bound device 1-2:1.0 to driver btusb <7>device: 'usbdev1.2_ep81': device_add <7>device: 'usbdev1.2_ep02': device_add <7>device: 'usbdev1.2_ep82': device_add <7>usb 1-2: adding 1-2:1.1 (config #1, interface 1) <7>device: '1-2:1.1': device_add <7>bus: 'usb': add device 1-2:1.1 <7>usb 1-2:1.1: uevent <7>driver: '1-2:1.1': driver_bound: bound to device 'btusb' <7>device: 'usbdev1.2_ep03': device_add <7>device: 'usbdev1.2_ep83': device_add <7>usb 1-2: adding 1-2:1.2 (config #1, interface 2) <7>device: '1-2:1.2': device_add <7>bus: 'usb': add device 1-2:1.2 <7>usb 1-2:1.2: uevent <7>bus: 'usb': driver_probe_device: matched device 1-2:1.2 with driver btusb <7>bus: 'usb': really_probe: probing driver btusb with device 1-2:1.2 <7>btusb 1-2:1.2: usb_probe_interface <7>btusb 1-2:1.2: usb_probe_interface - got id <4> <4>btusb_probe: call <4>btusb_probe: intf->cur_altsetting->desc.bInterfaceNumber => 2 <4>btusb_probe: interface numbers are hardcoded in the spec <4>btusb_probe: return -ENODEV <7>device: 'usbdev1.2': device_add <6>warning: `proftpd' uses 32-bit capabilities (legacy support in use) <7>drivers/usb/core/inode.c: creating file '002' <7>driver: '1-2': driver_bound: bound to device 'usb' <7>bus: 'usb': really_probe: bound device 1-2 to driver usb <7>device: 'usbdev1.2_ep00': device_add <7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004 <7>device: 'vcs3': device_add <7>device: 'vcsa3': device_add <7>device: 'vcs2': device_add <7>device: 'vcsa2': device_add <7>device: 'vcs4': device_add <7>device: 'vcsa4': device_add