0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 003 03 1 1 0 1 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 71 0d 003 03 0 0 0 0 0 1 1 79 0e 003 03 0 0 0 0 0 1 1 81 0f 003 03 0 0 0 0 0 1 1 89 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 003 03 1 1 0 1 0 1 1 91 01 003 03 1 1 0 1 0 1 1 99 02 003 03 1 1 0 1 0 1 1 A1 03 003 03 1 1 0 1 0 1 1 A9 04 003 03 1 1 0 1 0 1 1 B1 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 003 03 1 1 0 1 0 1 1 B9 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 1:0 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ20 -> 1:4 IRQ26 -> 1:10 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 999.5848 MHz. ..... host bus clock speed is 133.2777 MHz. cpu: 0, clocks: 1332777, slice: 444259 CPU0 cpu: 1, clocks: 1332777, slice: 444259 CPU1 checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 PCI: PCI BIOS revision 2.10 entry at 0xfdb57, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Discovered peer bus 01 PCI->APIC IRQ transform: (B0,I2,P0) -> 19 PCI->APIC IRQ transform: (B0,I3,P0) -> 18 PCI->APIC IRQ transform: (B0,I6,P0) -> 26 PCI->APIC IRQ transform: (B1,I4,P0) -> 16 PCI->APIC IRQ transform: (B1,I4,P1) -> 17 PCI->APIC IRQ transform: (B1,I10,P0) -> 20 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized Journalled Block Device driver loaded Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ServerWorks OSB4: IDE controller on PCI bus 00 dev 79 ServerWorks OSB4: chipset revision 0 ServerWorks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x5460-0x5467, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x5468-0x546f, BIOS settings: hdc:DMA, hdd:DMA hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Vendor: SEAGATE Model: ST318405LC Rev: 0105 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: ESG-SHV Model: SCA HSBP M10 Rev: 0.05 Type: Processor ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) Partition check: sda: sda1 sda2 sda3 sda4 Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0, type 3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sd(8,2): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 211824 ext3_orphan_cleanup: deleting unreferenced inode 211823 ext3_orphan_cleanup: deleting unreferenced inode 211458 ext3_orphan_cleanup: deleting unreferenced inode 211792 ext3_orphan_cleanup: deleting unreferenced inode 211334 ext3_orphan_cleanup: deleting unreferenced inode 712642 ext3_orphan_cleanup: deleting unreferenced inode 713744 ext3_orphan_cleanup: deleting unreferenced inode 713746 ext3_orphan_cleanup: deleting unreferenced inode 713748 ext3_orphan_cleanup: deleting unreferenced inode 713750 ext3_orphan_cleanup: deleting unreferenced inode 713752 ext3_orphan_cleanup: deleting unreferenced inode 713765 ext3_orphan_cleanup: deleting unreferenced inode 713768 ext3_orphan_cleanup: deleting unreferenced inode 713780 ext3_orphan_cleanup: deleting unreferenced inode 777241 ext3_orphan_cleanup: deleting unreferenced inode 129929 ext3_orphan_cleanup: deleting unreferenced inode 391040 ext3_orphan_cleanup: deleting unreferenced inode 129570 ext3_orphan_cleanup: deleting unreferenced inode 163423 ext3_orphan_cleanup: deleting unreferenced inode 519158 ext3_orphan_cleanup: deleting unreferenced inode 16231 ext3_orphan_cleanup: deleting unreferenced inode 16226 ext3_orphan_cleanup: deleting unreferenced inode 519157 ext3_orphan_cleanup: deleting unreferenced inode 518190 ext3_orphan_cleanup: deleting unreferenced inode 599367 ext3_orphan_cleanup: deleting unreferenced inode 599162 EXT3-fs: sd(8,2): 26 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 232k freed Adding Swap: 2040244k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xf88ff000, IRQ 9 usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 USB Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,2), internal journal qla2x00_set_info starts at address = c3180060 qla2x00: Found VID=1077 DID=2300 SSVID=1077 SSDID=9 scsi2: Found a QLA2300 @ bus 1, device 0xa, irq 20, iobase 0x6400 scsi(2): Allocated 4096 SRB(s) scsi(2): Configure NVRAM parameters... qla2x00: 64 Bit PCI Addressing Enabled scsi(2): Verifying loaded RISC code... scsi(2): Verifying chip... scsi(2): Waiting for LIP to complete... scsi(2): LIP reset occurred scsi(2): LIP occurred. scsi(2): LOOP UP detected scsi2: Topology - (Loop), Host Loop address 0x67 scsi-qla0-adapter-node=200000e08b0419ad; scsi-qla0-adapter-port=210000e08b0419ad; scsi-qla0-target-0=2000005013b3385a; scsi2 : QLogic QLA2300 PCI to Fibre Channel Host Adapter: bus 1 device 10 irq 20 Firmware version: 3.01.08, Driver version 6.0.1b3 Vendor: CNSi Model: G8324 Rev: L411 Type: Direct-Access ANSI SCSI revision: 03 Vendor: CNSi Model: G8324 Rev: L411 Type: Direct-Access ANSI SCSI revision: 03 Vendor: CNSi Model: G8324 Rev: L411 Type: Processor ANSI SCSI revision: 03 Vendor: CNSi Model: G8324 Rev: L411 Type: Processor ANSI SCSI revision: 03 Vendor: CNSi Model: G8324 Rev: L411 Type: Processor ANSI SCSI revision: 03 Vendor: CNSi Model: G8324 Rev: L411 Type: Processor ANSI SCSI revision: 03 Vendor: CNSi Model: G8324 Rev: L411 Type: Processor ANSI SCSI revision: 03 scsi(2:0:0:0): Enabled tagged queuing, queue depth 16. scsi(2:0:0:1): Enabled tagged queuing, queue depth 16. scsi(2:0:0:50): Enabled tagged queuing, queue depth 16. scsi(2:0:0:51): Enabled tagged queuing, queue depth 16. scsi(2:0:0:52): Enabled tagged queuing, queue depth 16. scsi(2:0:0:53): Enabled tagged queuing, queue depth 16. scsi(2:0:0:63): Enabled tagged queuing, queue depth 16. Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Attached scsi generic sg4 at scsi2, channel 0, id 0, lun 50, type 3 Attached scsi generic sg5 at scsi2, channel 0, id 0, lun 51, type 3 Attached scsi generic sg6 at scsi2, channel 0, id 0, lun 52, type 3 Attached scsi generic sg7 at scsi2, channel 0, id 0, lun 53, type 3 Attached scsi generic sg8 at scsi2, channel 0, id 0, lun 63, type 3 SCSI device sdb: 567762944 512-byte hdwr sectors (290695 MB) sdb: sdb1 SCSI device sdc: 35502592 512-byte hdwr sectors (18177 MB) sdc: sdc1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. Intel(R) PRO/1000 Network Driver - version 4.2.17-k1 Copyright (c) 1999-2002 Intel Corporation. eth0: Intel(R) PRO/1000 Network Connection eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth1: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:B6:36:B5, IRQ 18. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex LVM version 1.0.3(19/02/2002) module loaded invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer invalidate: dirty buffer invalidate: busy buffer kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.18, 14 May 2002 on lvm(58,9), internal journal ext3_orphan_cleanup: deleting unreferenced inode 508004 ext3_orphan_cleanup: deleting unreferenced inode 3260810 ext3_orphan_cleanup: deleting unreferenced inode 3260809 ext3_orphan_cleanup: deleting unreferenced inode 3260808 ext3_orphan_cleanup: deleting unreferenced inode 3260508 ext3_orphan_cleanup: deleting unreferenced inode 3260434 EXT3-fs: lvm(58,9): 6 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. NET4: AppleTalk 0.18a for Linux NET4.0 kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS 2.4-0.9.18, 14 May 2002 on lvm(58,17), internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS 2.4-0.9.18, 14 May 2002 on lvm(58,16), internal journal ext3_orphan_cleanup: deleting unreferenced inode 477378 ext3_orphan_cleanup: deleting unreferenced inode 1130774 ext3_orphan_cleanup: deleting unreferenced inode 169242 ext3_orphan_cleanup: deleting unreferenced inode 1216257 ext3_orphan_cleanup: deleting unreferenced inode 365755 ext3_orphan_cleanup: deleting unreferenced inode 1278797 ext3_orphan_cleanup: deleting unreferenced inode 1164966 ext3_orphan_cleanup: deleting unreferenced inode 1296488 ext3_orphan_cleanup: deleting unreferenced inode 1263660 ext3_orphan_cleanup: deleting unreferenced inode 787117 ext3_orphan_cleanup: deleting unreferenced inode 20410 ext3_orphan_cleanup: deleting unreferenced inode 1279380 ext3_orphan_cleanup: deleting unreferenced inode 1297521 ext3_orphan_cleanup: deleting unreferenced inode 820547 ext3_orphan_cleanup: deleting unreferenced inode 182863 ext3_orphan_cleanup: deleting unreferenced inode 757280 ext3_orphan_cleanup: deleting unreferenced inode 839553 EXT3-fs: lvm(58,16): 17 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack (8191 buckets, 65528 max) kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS 2.4-0.9.18, 14 May 2002 on lvm(58,12), internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode.