v10:
- Small updates to dt-bindings
- Make vdd-supply optional
- Drop MAX7357 enhanced mode configuration
v9:
- Fix 'then' not aligned with 'if' in dt-bindings
- Split enhanced mode configuration into separate patch
- Add MAX7357/MAX7358 register definitions
- Rename config register defines
- Update comments and explain non default config being applied on MAX7357
- Check for I2C_FUNC_SMBUS_WRITE_BYTE_DATA functionality
v8:
- Move allOf in dt-binding and use double negation
v7:
- Reworked the commit message, comments and renamed a struct
field. No functional change.
v6:
- Fix typo in dt-bindings
v5:
- Remove optional and make vdd-supply mandatory
v4:
- Add missing maxitems dt-bindings property
v3:
- Merge dt-bindings into i2c-mux-pca954x.yaml
v2:
- Move dt-bindings to separate file
- Added support for MAX736x as they are very similar
- Fixed an issue found by kernel test robot
- Dropped max735x property and custom IRQ check
- Added MAX7357 config register defines instead of magic values
- Renamed vcc-supply to vdd-supply
Patrick Rudolph (3):
dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
i2c: muxes: pca954x: Add MAX735x/MAX736x support
i2c: muxes: pca954x: Add regulator support
.../bindings/i2c/i2c-mux-pca954x.yaml | 43 ++++++++-
drivers/i2c/muxes/Kconfig | 6 +-
drivers/i2c/muxes/i2c-mux-pca954x.c | 95 +++++++++++++++++--
3 files changed, 130 insertions(+), 14 deletions(-)
--
2.39.1
Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
chips. The functionality will be provided by the exisintg pca954x driver.
While on it make the interrupts support conditionally as not all of the
existing chips have interrupts.
For chips that are powered off by default add an optional regulator
called vdd-supply.
Signed-off-by: Patrick Rudolph <[email protected]>
---
.../bindings/i2c/i2c-mux-pca954x.yaml | 43 ++++++++++++++++---
1 file changed, 38 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index 9f1726d0356b..696fdb647f89 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -4,21 +4,29 @@
$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: NXP PCA954x I2C bus switch
+title: NXP PCA954x I2C and compatible bus switches
maintainers:
- Laurent Pinchart <[email protected]>
description:
- The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
-
-allOf:
- - $ref: /schemas/i2c/i2c-mux.yaml#
+ The NXP PCA954x and compatible devices are I2C bus
+ multiplexer/switches that share the same functionality
+ and register layout.
+ The devices usually have 4 or 8 child buses, which are
+ attached to the parent bus by using the SMBus "Send Byte"
+ command.
properties:
compatible:
oneOf:
- enum:
+ - maxim,max7356
+ - maxim,max7357
+ - maxim,max7358
+ - maxim,max7367
+ - maxim,max7368
+ - maxim,max7369
- nxp,pca9540
- nxp,pca9542
- nxp,pca9543
@@ -59,10 +67,33 @@ properties:
description: if present, overrides i2c-mux-idle-disconnect
$ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
+ vdd-supply:
+ description: A voltage regulator supplying power to the chip.
+
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/i2c/i2c-mux.yaml#
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - maxim,max7367
+ - maxim,max7369
+ - nxp,pca9542
+ - nxp,pca9543
+ - nxp,pca9544
+ - nxp,pca9545
+ then:
+ properties:
+ interrupts: false
+ "#interrupt-cells": false
+ interrupt-controller: false
+
unevaluatedProperties: false
examples:
@@ -79,6 +110,8 @@ examples:
#size-cells = <0>;
reg = <0x74>;
+ vdd-supply = <&p3v3>;
+
interrupt-parent = <&ipic>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
--
2.39.1
Add support for the following Maxim chips using the existing PCA954x
driver:
- MAX7356
- MAX7357
- MAX7358
- MAX7367
- MAX7368
- MAX7369
All added Maxim chips behave like the PCA954x, where a single SMBUS byte
write selects up to 8 channels to be bridged to the primary bus.
While the MAX7357/MAX7358 have interrupt support, they don't act as
interrupt controller like the PCA9545 does. Thus don't enable IRQ support
and handle them like the PCA9548.
Tested using the MAX7357.
Signed-off-by: Patrick Rudolph <[email protected]>
---
drivers/i2c/muxes/Kconfig | 6 +--
drivers/i2c/muxes/i2c-mux-pca954x.c | 60 ++++++++++++++++++++++++++++-
2 files changed, 62 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index ea838dbae32e..db1b9057612a 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -65,11 +65,11 @@ config I2C_MUX_PCA9541
will be called i2c-mux-pca9541.
config I2C_MUX_PCA954x
- tristate "NXP PCA954x and PCA984x I2C Mux/switches"
+ tristate "NXP PCA954x/PCA984x and Maxim MAX735x/MAX736x I2C Mux/switches"
depends on GPIOLIB || COMPILE_TEST
help
- If you say yes here you get support for the NXP PCA954x
- and PCA984x I2C mux/switch devices.
+ If you say yes here you get support for NXP PCA954x/PCA984x
+ and Maxim MAX735x/MAX736x I2C mux/switch devices.
This driver can also be built as a module. If so, the module
will be called i2c-mux-pca954x.
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 0ccee2ae5720..39f313658b18 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -4,6 +4,7 @@
*
* Copyright (c) 2008-2009 Rodolfo Giometti <[email protected]>
* Copyright (c) 2008-2009 Eurotech S.p.A. <[email protected]>
+ * Copyright (c) 2022 9elements GmbH <[email protected]>
*
* This module supports the PCA954x and PCA984x series of I2C multiplexer/switch
* chips made by NXP Semiconductors.
@@ -11,6 +12,12 @@
* PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547,
* PCA9548, PCA9846, PCA9847, PCA9848 and PCA9849.
*
+ * It's also compatible to Maxims MAX735x I2C switch chips, which are controlled
+ * as the NXP PCA9548 and the MAX736x chips that act like the PCA9544.
+ *
+ * This includes the:
+ * MAX7356, MAX7357, MAX7358, MAX7367, MAX7368 and MAX7369
+ *
* These chips are all controlled via the I2C bus itself, and all have a
* single 8-bit register. The upstream "parent" bus fans out to two,
* four, or eight downstream busses or channels; which of these
@@ -51,6 +58,12 @@
#define PCA954X_IRQ_OFFSET 4
enum pca_type {
+ max_7367,
+ max_7368,
+ max_7369,
+ max_7356,
+ max_7357,
+ max_7358,
pca_9540,
pca_9542,
pca_9543,
@@ -90,8 +103,41 @@ struct pca954x {
raw_spinlock_t lock;
};
-/* Provide specs for the PCA954x types we know about */
+/* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
static const struct chip_desc chips[] = {
+ [max_7356] = {
+ .nchans = 8,
+ .muxtype = pca954x_isswi,
+ .id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+ },
+ [max_7357] = {
+ .nchans = 8,
+ .muxtype = pca954x_isswi,
+ .id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+ },
+ [max_7358] = {
+ .nchans = 8,
+ .muxtype = pca954x_isswi,
+ .id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+ },
+ [max_7367] = {
+ .nchans = 4,
+ .muxtype = pca954x_isswi,
+ .has_irq = 1,
+ .id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+ },
+ [max_7368] = {
+ .nchans = 4,
+ .muxtype = pca954x_isswi,
+ .id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+ },
+ [max_7369] = {
+ .nchans = 4,
+ .enable = 0x4,
+ .muxtype = pca954x_ismux,
+ .has_irq = 1,
+ .id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+ },
[pca_9540] = {
.nchans = 2,
.enable = 0x4,
@@ -177,6 +223,12 @@ static const struct chip_desc chips[] = {
};
static const struct i2c_device_id pca954x_id[] = {
+ { "max7356", max_7356 },
+ { "max7357", max_7357 },
+ { "max7358", max_7358 },
+ { "max7367", max_7367 },
+ { "max7368", max_7368 },
+ { "max7369", max_7369 },
{ "pca9540", pca_9540 },
{ "pca9542", pca_9542 },
{ "pca9543", pca_9543 },
@@ -194,6 +246,12 @@ static const struct i2c_device_id pca954x_id[] = {
MODULE_DEVICE_TABLE(i2c, pca954x_id);
static const struct of_device_id pca954x_of_match[] = {
+ { .compatible = "maxim,max7356", .data = &chips[max_7356] },
+ { .compatible = "maxim,max7357", .data = &chips[max_7357] },
+ { .compatible = "maxim,max7358", .data = &chips[max_7358] },
+ { .compatible = "maxim,max7367", .data = &chips[max_7367] },
+ { .compatible = "maxim,max7368", .data = &chips[max_7368] },
+ { .compatible = "maxim,max7369", .data = &chips[max_7369] },
{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] },
--
2.39.1
Add a vdd regulator and enable it for boards that have the
mux powered off by default.
Signed-off-by: Patrick Rudolph <[email protected]>
---
drivers/i2c/muxes/i2c-mux-pca954x.c | 35 ++++++++++++++++++++++++-----
1 file changed, 30 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 39f313658b18..0d966a55b727 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -49,6 +49,7 @@
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/property.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <dt-bindings/mux/mux.h>
@@ -101,6 +102,7 @@ struct pca954x {
struct irq_domain *irq;
unsigned int irq_mask;
raw_spinlock_t lock;
+ struct regulator *supply;
};
/* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
@@ -440,6 +442,9 @@ static void pca954x_cleanup(struct i2c_mux_core *muxc)
struct pca954x *data = i2c_mux_priv(muxc);
int c, irq;
+ if (data->supply)
+ regulator_disable(data->supply);
+
if (data->irq) {
for (c = 0; c < data->chip->nchans; c++) {
irq = irq_find_mapping(data->irq, c);
@@ -492,10 +497,28 @@ static int pca954x_probe(struct i2c_client *client)
i2c_set_clientdata(client, muxc);
data->client = client;
+ data->supply = devm_regulator_get_optional(dev, "vdd");
+ if (IS_ERR(data->supply)) {
+ ret = PTR_ERR(data->supply);
+ if (ret != -ENODEV)
+ return dev_err_probe(dev, ret,
+ "Failed to request regulator\n");
+ else
+ data->supply = NULL;
+ } else {
+ ret = regulator_enable(data->supply);
+ if (ret) {
+ dev_err(dev, "Failed to enable regulator: %d\n", ret);
+ return ret;
+ }
+ }
+
/* Reset the mux if a reset GPIO is specified. */
gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(gpio))
- return PTR_ERR(gpio);
+ if (IS_ERR(gpio)) {
+ ret = PTR_ERR(gpio);
+ goto fail_cleanup;
+ }
if (gpio) {
udelay(1);
gpiod_set_value_cansleep(gpio, 0);
@@ -512,7 +535,7 @@ static int pca954x_probe(struct i2c_client *client)
ret = i2c_get_device_id(client, &id);
if (ret && ret != -EOPNOTSUPP)
- return ret;
+ goto fail_cleanup;
if (!ret &&
(id.manufacturer_id != data->chip->id.manufacturer_id ||
@@ -520,7 +543,8 @@ static int pca954x_probe(struct i2c_client *client)
dev_warn(dev, "unexpected device id %03x-%03x-%x\n",
id.manufacturer_id, id.part_id,
id.die_revision);
- return -ENODEV;
+ ret = -ENODEV;
+ goto fail_cleanup;
}
}
@@ -539,7 +563,8 @@ static int pca954x_probe(struct i2c_client *client)
ret = pca954x_init(client, data);
if (ret < 0) {
dev_warn(dev, "probe failed\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto fail_cleanup;
}
ret = pca954x_irq_setup(muxc);
--
2.39.1
On 23/03/2023 12:53, Patrick Rudolph wrote:
> Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
> chips. The functionality will be provided by the exisintg pca954x driver.
>
> While on it make the interrupts support conditionally as not all of the
> existing chips have interrupts.
>
> For chips that are powered off by default add an optional regulator
> called vdd-supply.
>
> Signed-off-by: Patrick Rudolph <[email protected]>
I just received this patch sent twice - as 1/3 and 1/4 - without
changelog, no cover letter, nothing more. Also other patches are
missing, but that I could understand as intentional.
This is confusing. New submission means new version. Attach changelog
after --- explaining the changes.
Best regards,
Krzysztof
On Thu, 23 Mar 2023 12:53:53 +0100, Patrick Rudolph wrote:
> Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
> chips. The functionality will be provided by the exisintg pca954x driver.
>
> While on it make the interrupts support conditionally as not all of the
> existing chips have interrupts.
>
> For chips that are powered off by default add an optional regulator
> called vdd-supply.
>
> Signed-off-by: Patrick Rudolph <[email protected]>
> ---
> .../bindings/i2c/i2c-mux-pca954x.yaml | 43 ++++++++++++++++---
> 1 file changed, 38 insertions(+), 5 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.example.dtb: i2c-mux@74: interrupts: False schema does not allow [[17, 8]]
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.example.dtb: i2c-mux@74: #interrupt-cells: False schema does not allow [[2]]
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.example.dtb: i2c-mux@74: interrupt-controller: False schema does not allow True
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.