Add DT bindings YAML schema for DMA controller driver
of Lightning Mountain (LGM) SoC.
Signed-off-by: Amireddy Mallikarjuna reddy <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v1:
- Initial version.
v2:
- Fix bot errors.
v3:
- No change.
v4:
- Address Thomas langer comments
- use node name pattern as dma-controller as in common binding.
- Remove "_" (underscore) in instance name.
- Remove "port-" and "chan-" in attribute name for both 'dma-ports' & 'dma-channels' child nodes.
v5:
- Moved some of the attributes in 'dma-ports' & 'dma-channels' child nodes to dma client/consumer side as cells in 'dmas' properties.
v6:
- Add additionalProperties: false
- completely removed 'dma-ports' and 'dma-channels' child nodes.
- Moved channel dt properties to client side dmas.
- Use standard dma-channels and dma-channel-mask properties.
- Documented reset-names
- Add description for dma-cells
v7:
- modified compatible to oneof
- Reduced number of dma-cells to 3
- Fine tune the description of some properties.
v7-resend:
- rebase to 5.10-rc1
- No change.
v8:
- rebased to 5.10-rc3
- Fixing the bot issues (wrong indentation)
v9:
- Use 'enum' instead of oneOf+const
- Drop '#dma-cells' in required:, already covered in dma-common.yaml
- Drop nodename Already covered by dma-controller.yaml
v10:
- rebased to 5.10-rc6
- Add Reviewed-by: Rob Herring <[email protected]>
- Fixed typo.
- moved property dma-desc-in-sram to driver side.
- Moved property dma-orrc to driver side.
v10-resend:
- rebased to 5.10
- No change
v11:
- Since v10 was sent, there have been some fixes for JSON pointers and tools check now got this is missing a '/'.
Add missing a '/' in '/schemas/types.yaml#definitions/uint32'
---
.../devicetree/bindings/dma/intel,ldma.yaml | 116 ++++++++++++++++++
1 file changed, 116 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml
diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
new file mode 100644
index 000000000000..a5c4be783593
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lightning Mountain centralized DMA controllers.
+
+maintainers:
+ - [email protected]
+ - [email protected]
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - intel,lgm-cdma
+ - intel,lgm-dma2tx
+ - intel,lgm-dma1rx
+ - intel,lgm-dma1tx
+ - intel,lgm-dma0tx
+ - intel,lgm-dma3
+ - intel,lgm-toe-dma30
+ - intel,lgm-toe-dma31
+
+ reg:
+ maxItems: 1
+
+ "#dma-cells":
+ const: 3
+ description:
+ The first cell is the peripheral's DMA request line.
+ The second cell is the peripheral's (port) number corresponding to the channel.
+ The third cell is the burst length of the channel.
+
+ dma-channels:
+ minimum: 1
+ maximum: 16
+
+ dma-channel-mask:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: ctrl
+
+ interrupts:
+ maxItems: 1
+
+ intel,dma-poll-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ DMA descriptor polling counter is used to control the poling mechanism
+ for the descriptor fetching for all channels.
+
+ intel,dma-byte-en:
+ type: boolean
+ description:
+ DMA byte enable is only valid for DMA write(RX).
+ Byte enable(1) means DMA write will be based on the number of dwords
+ instead of the whole burst.
+
+ intel,dma-drb:
+ type: boolean
+ description:
+ DMA descriptor read back to make sure data and desc synchronization.
+
+ intel,dma-dburst-wr:
+ type: boolean
+ description:
+ Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
+ if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
+ It only applies to RX DMA and memcopy DMA.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ dma0: dma-controller@e0e00000 {
+ compatible = "intel,lgm-cdma";
+ reg = <0xe0e00000 0x1000>;
+ #dma-cells = <3>;
+ dma-channels = <16>;
+ dma-channel-mask = <0xFFFF>;
+ interrupt-parent = <&ioapic1>;
+ interrupts = <82 1>;
+ resets = <&rcu0 0x30 0>;
+ reset-names = "ctrl";
+ clocks = <&cgu0 80>;
+ intel,dma-poll-cnt = <4>;
+ intel,dma-byte-en;
+ intel,dma-drb;
+ };
+ - |
+ dma3: dma-controller@ec800000 {
+ compatible = "intel,lgm-dma3";
+ reg = <0xec800000 0x1000>;
+ clocks = <&cgu0 71>;
+ resets = <&rcu0 0x10 9>;
+ #dma-cells = <3>;
+ intel,dma-poll-cnt = <16>;
+ intel,dma-byte-en;
+ intel,dma-dburst-wr;
+ };
--
2.17.1