This patch implemenets a driver to support the front panel LEDs of
SGI Octane (IP30) workstations.
Reviewed-by: Dan Murphy <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
---
Changes in v5:
- use defines for led enumaration
- name red led fault and white led system
Changes in v4:
- simplified ip30led_set by using gated value from led framework
Changes in v3:
- rebased to 5.6-rc2
Changes in v2:
- use led names conforming to include/dt-bindings/leds/common.h
- read LED state from firmware
- leave setting up to user
drivers/leds/Kconfig | 11 +++++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ip30.c | 86 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 98 insertions(+)
create mode 100644 drivers/leds/leds-ip30.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index d82f1dea3711..c664d84e1667 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -846,6 +846,17 @@ config LEDS_TPS6105X
It is a single boost converter primarily for white LEDs and
audio amplifiers.
+config LEDS_IP30
+ tristate "LED support for SGI Octane machines"
+ depends on LEDS_CLASS
+ depends on SGI_MFD_IOC3
+ help
+ This option enables support for the Red and White LEDs of
+ SGI Octane machines.
+
+ To compile this driver as a module, choose M here: the module
+ will be called leds-ip30.
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d7e1107753fb..46bd611a03a9 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -86,6 +86,7 @@ obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o
obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o
obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o
obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o
+obj-$(CONFIG_LEDS_IP30) += leds-ip30.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
diff --git a/drivers/leds/leds-ip30.c b/drivers/leds/leds-ip30.c
new file mode 100644
index 000000000000..e95ea786a43e
--- /dev/null
+++ b/drivers/leds/leds-ip30.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LED Driver for SGI Octane machines
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+#define IP30_LED_SYSTEM 0
+#define IP30_LED_FAULT 1
+
+struct ip30_led {
+ struct led_classdev cdev;
+ u32 __iomem *reg;
+};
+
+static void ip30led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct ip30_led *led = container_of(led_cdev, struct ip30_led, cdev);
+
+ writel(value, led->reg);
+}
+
+static int ip30led_create(struct platform_device *pdev, int num)
+{
+ struct resource *res;
+ struct ip30_led *data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, num);
+ if (!res)
+ return -EBUSY;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->reg))
+ return PTR_ERR(data->reg);
+
+
+ switch (num) {
+ case IP30_LED_SYSTEM:
+ data->cdev.name = "white:system";
+ break;
+ case IP30_LED_FAULT:
+ data->cdev.name = "red:fault";
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ data->cdev.brightness = readl(data->reg);
+ data->cdev.max_brightness = 1;
+ data->cdev.brightness_set = ip30led_set;
+
+ return devm_led_classdev_register(&pdev->dev, &data->cdev);
+}
+
+static int ip30led_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = ip30led_create(pdev, IP30_LED_SYSTEM);
+ if (ret < 0)
+ return ret;
+
+ return ip30led_create(pdev, IP30_LED_FAULT);
+}
+
+static struct platform_driver ip30led_driver = {
+ .probe = ip30led_probe,
+ .driver = {
+ .name = "ip30-leds",
+ },
+};
+
+module_platform_driver(ip30led_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <[email protected]>");
+MODULE_DESCRIPTION("SGI Octane LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ip30-leds");
--
2.25.0
Hi Thomas,
Thank you for the update.
On 2/24/20 12:17 PM, Thomas Bogendoerfer wrote:
> This patch implemenets a driver to support the front panel LEDs of
> SGI Octane (IP30) workstations.
>
> Reviewed-by: Dan Murphy <[email protected]>
> Signed-off-by: Thomas Bogendoerfer <[email protected]>
> ---
> Changes in v5:
> - use defines for led enumaration
> - name red led fault and white led system
>
> Changes in v4:
> - simplified ip30led_set by using gated value from led framework
>
> Changes in v3:
> - rebased to 5.6-rc2
>
> Changes in v2:
> - use led names conforming to include/dt-bindings/leds/common.h
> - read LED state from firmware
> - leave setting up to user
>
> drivers/leds/Kconfig | 11 +++++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-ip30.c | 86 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 98 insertions(+)
> create mode 100644 drivers/leds/leds-ip30.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index d82f1dea3711..c664d84e1667 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -846,6 +846,17 @@ config LEDS_TPS6105X
> It is a single boost converter primarily for white LEDs and
> audio amplifiers.
>
> +config LEDS_IP30
> + tristate "LED support for SGI Octane machines"
> + depends on LEDS_CLASS
> + depends on SGI_MFD_IOC3
> + help
> + This option enables support for the Red and White LEDs of
> + SGI Octane machines.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called leds-ip30.
> +
> comment "LED Triggers"
> source "drivers/leds/trigger/Kconfig"
>
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index d7e1107753fb..46bd611a03a9 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -86,6 +86,7 @@ obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o
> obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o
> obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o
> obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o
> +obj-$(CONFIG_LEDS_IP30) += leds-ip30.o
>
> # LED SPI Drivers
> obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
> diff --git a/drivers/leds/leds-ip30.c b/drivers/leds/leds-ip30.c
> new file mode 100644
> index 000000000000..e95ea786a43e
> --- /dev/null
> +++ b/drivers/leds/leds-ip30.c
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * LED Driver for SGI Octane machines
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +
> +#define IP30_LED_SYSTEM 0
> +#define IP30_LED_FAULT 1
> +
> +struct ip30_led {
> + struct led_classdev cdev;
> + u32 __iomem *reg;
> +};
> +
> +static void ip30led_set(struct led_classdev *led_cdev,
> + enum led_brightness value)
> +{
> + struct ip30_led *led = container_of(led_cdev, struct ip30_led, cdev);
> +
> + writel(value, led->reg);
> +}
> +
> +static int ip30led_create(struct platform_device *pdev, int num)
> +{
> + struct resource *res;
> + struct ip30_led *data;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, num);
> + if (!res)
> + return -EBUSY;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->reg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(data->reg))
> + return PTR_ERR(data->reg);
> +
> +
> + switch (num) {
> + case IP30_LED_SYSTEM:
> + data->cdev.name = "white:system";
> + break;
> + case IP30_LED_FAULT:
> + data->cdev.name = "red:fault";
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + data->cdev.brightness = readl(data->reg);
> + data->cdev.max_brightness = 1;
> + data->cdev.brightness_set = ip30led_set;
> +
> + return devm_led_classdev_register(&pdev->dev, &data->cdev);
> +}
> +
> +static int ip30led_probe(struct platform_device *pdev)
> +{
> + int ret;
> +
> + ret = ip30led_create(pdev, IP30_LED_SYSTEM);
> + if (ret < 0)
> + return ret;
> +
> + return ip30led_create(pdev, IP30_LED_FAULT);
> +}
> +
> +static struct platform_driver ip30led_driver = {
> + .probe = ip30led_probe,
> + .driver = {
> + .name = "ip30-leds",
> + },
> +};
> +
> +module_platform_driver(ip30led_driver);
> +
> +MODULE_AUTHOR("Thomas Bogendoerfer <[email protected]>");
> +MODULE_DESCRIPTION("SGI Octane LED driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:ip30-leds");
Acked-by: Jacek Anaszewski <[email protected]>
--
Best regards,
Jacek Anaszewski
Hi!
> This patch implemenets a driver to support the front panel LEDs of
> SGI Octane (IP30) workstations.
Thanks, applied.
> + switch (num) {
> + case IP30_LED_SYSTEM:
> + data->cdev.name = "white:system";
> + break;
> + case IP30_LED_FAULT:
> + data->cdev.name = "red:fault";
> + break;
If the white LED normally serves as power indicator for the system, we
might want to specify that. Does it?
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Wed, 26 Feb 2020 15:00:58 +0100
Pavel Machek <[email protected]> wrote:
> > + switch (num) {
> > + case IP30_LED_SYSTEM:
> > + data->cdev.name = "white:system";
> > + break;
> > + case IP30_LED_FAULT:
> > + data->cdev.name = "red:fault";
> > + break;
>
> If the white LED normally serves as power indicator for the system, we
> might want to specify that. Does it?
it could be seen as such, but it will be turned on only after POST has finished
successfull. So it's off if POST failed, which doesn't make it a real power led
IMHO.
Thomas.
--
SUSE Software Solutions Germany GmbH
HRB 36809 (AG N?rnberg)
Gesch?ftsf?hrer: Felix Imend?rffer