2022-02-14 05:53:23

by Manivannan Sadhasivam

[permalink] [raw]
Subject: [PATCH v3 13/25] bus: mhi: ep: Add support for sending events to the host

Add support for sending the events to the host over MHI bus from the
endpoint. Following events are supported:

1. Transfer completion event
2. Command completion event
3. State change event
4. Execution Environment (EE) change event

An event is sent whenever an operation has been completed in the MHI EP
device. Event is sent using the MHI event ring and additionally the host
is notified using an IRQ if required.

Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/bus/mhi/common.h | 15 ++++
drivers/bus/mhi/ep/internal.h | 8 ++-
drivers/bus/mhi/ep/main.c | 126 ++++++++++++++++++++++++++++++++++
include/linux/mhi_ep.h | 8 +++
4 files changed, 155 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/mhi/common.h b/drivers/bus/mhi/common.h
index 728c82928d8d..26d94ed52b34 100644
--- a/drivers/bus/mhi/common.h
+++ b/drivers/bus/mhi/common.h
@@ -176,6 +176,21 @@
#define MHI_TRE_GET_EV_LINKSPEED(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 24) & 0xFF)
#define MHI_TRE_GET_EV_LINKWIDTH(tre) (MHI_TRE_GET_DWORD(tre, 0) & 0xFF)

+/* State change event */
+#define MHI_SC_EV_PTR 0
+#define MHI_SC_EV_DWORD0(state) cpu_to_le32(state << 24)
+#define MHI_SC_EV_DWORD1(type) cpu_to_le32(type << 16)
+
+/* EE event */
+#define MHI_EE_EV_PTR 0
+#define MHI_EE_EV_DWORD0(ee) cpu_to_le32(ee << 24)
+#define MHI_EE_EV_DWORD1(type) cpu_to_le32(type << 16)
+
+/* Command Completion event */
+#define MHI_CC_EV_PTR(ptr) cpu_to_le64(ptr)
+#define MHI_CC_EV_DWORD0(code) cpu_to_le32(code << 24)
+#define MHI_CC_EV_DWORD1(type) cpu_to_le32(type << 16)
+
/* Transfer descriptor macros */
#define MHI_TRE_DATA_PTR(ptr) cpu_to_le64(ptr)
#define MHI_TRE_DATA_DWORD0(len) cpu_to_le32(len & MHI_MAX_MTU)
diff --git a/drivers/bus/mhi/ep/internal.h b/drivers/bus/mhi/ep/internal.h
index 48d6e9667d55..fd63f79c6aec 100644
--- a/drivers/bus/mhi/ep/internal.h
+++ b/drivers/bus/mhi/ep/internal.h
@@ -131,8 +131,8 @@ enum mhi_ep_ring_type {
};

struct mhi_ep_ring_element {
- u64 ptr;
- u32 dword[2];
+ __le64 ptr;
+ __le32 dword[2];
};

/* Ring element */
@@ -227,4 +227,8 @@ void mhi_ep_mmio_get_mhi_state(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state *s
void mhi_ep_mmio_init(struct mhi_ep_cntrl *mhi_cntrl);
void mhi_ep_mmio_update_ner(struct mhi_ep_cntrl *mhi_cntrl);

+/* MHI EP core functions */
+int mhi_ep_send_state_change_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state state);
+int mhi_ep_send_ee_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ep_execenv exec_env);
+
#endif
diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
index 2c8045766292..61f066c6286b 100644
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -18,6 +18,131 @@

static DEFINE_IDA(mhi_ep_cntrl_ida);

+static int mhi_ep_send_event(struct mhi_ep_cntrl *mhi_cntrl, u32 ring_idx,
+ struct mhi_ep_ring_element *el)
+{
+ struct device *dev = &mhi_cntrl->mhi_dev->dev;
+ union mhi_ep_ring_ctx *ctx;
+ struct mhi_ep_ring *ring;
+ int ret;
+
+ mutex_lock(&mhi_cntrl->event_lock);
+ ring = &mhi_cntrl->mhi_event[ring_idx].ring;
+ ctx = (union mhi_ep_ring_ctx *)&mhi_cntrl->ev_ctx_cache[ring_idx];
+ if (!ring->started) {
+ ret = mhi_ep_ring_start(mhi_cntrl, ring, ctx);
+ if (ret) {
+ dev_err(dev, "Error starting event ring (%d)\n", ring_idx);
+ goto err_unlock;
+ }
+ }
+
+ /* Add element to the event ring */
+ ret = mhi_ep_ring_add_element(ring, el);
+ if (ret) {
+ dev_err(dev, "Error adding element to event ring (%d)\n", ring_idx);
+ goto err_unlock;
+ }
+
+ /* Ensure that the ring pointer gets updated in host memory before triggering IRQ */
+ smp_wmb();
+
+ mutex_unlock(&mhi_cntrl->event_lock);
+
+ /*
+ * Raise IRQ to host only if the BEI flag is not set in TRE. Host might
+ * set this flag for interrupt moderation as per MHI protocol.
+ */
+ if (!MHI_EP_TRE_GET_BEI(el))
+ mhi_cntrl->raise_irq(mhi_cntrl, ring->irq_vector);
+
+ return 0;
+
+err_unlock:
+ mutex_unlock(&mhi_cntrl->event_lock);
+
+ return ret;
+}
+
+static int mhi_ep_send_completion_event(struct mhi_ep_cntrl *mhi_cntrl,
+ struct mhi_ep_ring *ring, u32 len,
+ enum mhi_ev_ccs code)
+{
+ struct mhi_ep_ring_element event = {};
+ __le32 tmp;
+
+ event.ptr = le64_to_cpu(ring->ring_ctx->generic.rbase) +
+ ring->rd_offset * sizeof(struct mhi_ep_ring_element);
+
+ tmp = event.dword[0];
+ tmp |= MHI_TRE_EV_DWORD0(code, len);
+ event.dword[0] = tmp;
+
+ tmp = event.dword[1];
+ tmp |= MHI_TRE_EV_DWORD1(ring->ch_id, MHI_PKT_TYPE_TX_EVENT);
+ event.dword[1] = tmp;
+
+ return mhi_ep_send_event(mhi_cntrl, ring->er_index, &event);
+}
+
+int mhi_ep_send_state_change_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state state)
+{
+ struct mhi_ep_ring_element event = {};
+ __le32 tmp;
+
+ tmp = event.dword[0];
+ tmp |= MHI_SC_EV_DWORD0(state);
+ event.dword[0] = tmp;
+
+ tmp = event.dword[1];
+ tmp |= MHI_SC_EV_DWORD1(MHI_PKT_TYPE_STATE_CHANGE_EVENT);
+ event.dword[1] = tmp;
+
+ return mhi_ep_send_event(mhi_cntrl, 0, &event);
+}
+
+int mhi_ep_send_ee_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ep_execenv exec_env)
+{
+ struct mhi_ep_ring_element event = {};
+ __le32 tmp;
+
+ tmp = event.dword[0];
+ tmp |= MHI_EE_EV_DWORD0(exec_env);
+ event.dword[0] = tmp;
+
+ tmp = event.dword[1];
+ tmp |= MHI_SC_EV_DWORD1(MHI_PKT_TYPE_EE_EVENT);
+ event.dword[1] = tmp;
+
+ return mhi_ep_send_event(mhi_cntrl, 0, &event);
+}
+
+static int mhi_ep_send_cmd_comp_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ev_ccs code)
+{
+ struct device *dev = &mhi_cntrl->mhi_dev->dev;
+ struct mhi_ep_ring_element event = {};
+ __le32 tmp;
+
+ if (code > MHI_EV_CC_BAD_TRE) {
+ dev_err(dev, "Invalid command completion code (%d)\n", code);
+ return -EINVAL;
+ }
+
+ event.ptr = le64_to_cpu(mhi_cntrl->cmd_ctx_cache->rbase)
+ + (mhi_cntrl->mhi_cmd->ring.rd_offset *
+ (sizeof(struct mhi_ep_ring_element)));
+
+ tmp = event.dword[0];
+ tmp |= MHI_CC_EV_DWORD0(code);
+ event.dword[0] = tmp;
+
+ tmp = event.dword[1];
+ tmp |= MHI_CC_EV_DWORD1(MHI_PKT_TYPE_CMD_COMPLETION_EVENT);
+ event.dword[1] = tmp;
+
+ return mhi_ep_send_event(mhi_cntrl, 0, &event);
+}
+
static void mhi_ep_ring_worker(struct work_struct *work)
{
struct mhi_ep_cntrl *mhi_cntrl = container_of(work,
@@ -270,6 +395,7 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl,

INIT_LIST_HEAD(&mhi_cntrl->ch_db_list);
spin_lock_init(&mhi_cntrl->list_lock);
+ mutex_init(&mhi_cntrl->event_lock);

/* Set MHI version and AMSS EE before enumeration */
mhi_ep_mmio_write(mhi_cntrl, MHIVER, config->mhi_version);
diff --git a/include/linux/mhi_ep.h b/include/linux/mhi_ep.h
index 33828a6c4e63..062133a68118 100644
--- a/include/linux/mhi_ep.h
+++ b/include/linux/mhi_ep.h
@@ -59,6 +59,9 @@ struct mhi_ep_db_info {
* @mhi_event: Points to the event ring configurations table
* @mhi_cmd: Points to the command ring configurations table
* @sm: MHI Endpoint state machine
+ * @ch_ctx_cache: Cache of host channel context data structure
+ * @ev_ctx_cache: Cache of host event context data structure
+ * @cmd_ctx_cache: Cache of host command context data structure
* @ch_ctx_host_pa: Physical address of host channel context data structure
* @ev_ctx_host_pa: Physical address of host event context data structure
* @cmd_ctx_host_pa: Physical address of host command context data structure
@@ -67,6 +70,7 @@ struct mhi_ep_db_info {
* @ch_db_list: List of queued channel doorbells
* @st_transition_list: List of state transitions
* @list_lock: Lock for protecting state transition and channel doorbell lists
+ * @event_lock: Lock for protecting event rings
* @chdb: Array of channel doorbell interrupt info
* @raise_irq: CB function for raising IRQ to the host
* @alloc_addr: CB function for allocating memory in endpoint for storing host context
@@ -94,6 +98,9 @@ struct mhi_ep_cntrl {
struct mhi_ep_cmd *mhi_cmd;
struct mhi_ep_sm *sm;

+ struct mhi_chan_ctxt *ch_ctx_cache;
+ struct mhi_event_ctxt *ev_ctx_cache;
+ struct mhi_cmd_ctxt *cmd_ctx_cache;
u64 ch_ctx_host_pa;
u64 ev_ctx_host_pa;
u64 cmd_ctx_host_pa;
@@ -104,6 +111,7 @@ struct mhi_ep_cntrl {
struct list_head ch_db_list;
struct list_head st_transition_list;
spinlock_t list_lock;
+ struct mutex event_lock;
struct mhi_ep_db_info chdb[4];

void (*raise_irq)(struct mhi_ep_cntrl *mhi_cntrl, u32 vector);
--
2.25.1


2022-02-16 07:09:42

by Alex Elder

[permalink] [raw]
Subject: Re: [PATCH v3 13/25] bus: mhi: ep: Add support for sending events to the host

On 2/12/22 12:21 PM, Manivannan Sadhasivam wrote:
> Add support for sending the events to the host over MHI bus from the
> endpoint. Following events are supported:
>
> 1. Transfer completion event
> 2. Command completion event
> 3. State change event
> 4. Execution Environment (EE) change event
>
> An event is sent whenever an operation has been completed in the MHI EP
> device. Event is sent using the MHI event ring and additionally the host
> is notified using an IRQ if required.
>
> Signed-off-by: Manivannan Sadhasivam <[email protected]>

A few things can be simplified here.

-Alex

> ---
> drivers/bus/mhi/common.h | 15 ++++
> drivers/bus/mhi/ep/internal.h | 8 ++-
> drivers/bus/mhi/ep/main.c | 126 ++++++++++++++++++++++++++++++++++
> include/linux/mhi_ep.h | 8 +++
> 4 files changed, 155 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bus/mhi/common.h b/drivers/bus/mhi/common.h
> index 728c82928d8d..26d94ed52b34 100644
> --- a/drivers/bus/mhi/common.h
> +++ b/drivers/bus/mhi/common.h
> @@ -176,6 +176,21 @@
> #define MHI_TRE_GET_EV_LINKSPEED(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 24) & 0xFF)
> #define MHI_TRE_GET_EV_LINKWIDTH(tre) (MHI_TRE_GET_DWORD(tre, 0) & 0xFF)
>
> +/* State change event */
> +#define MHI_SC_EV_PTR 0
> +#define MHI_SC_EV_DWORD0(state) cpu_to_le32(state << 24)
> +#define MHI_SC_EV_DWORD1(type) cpu_to_le32(type << 16)
> +
> +/* EE event */
> +#define MHI_EE_EV_PTR 0
> +#define MHI_EE_EV_DWORD0(ee) cpu_to_le32(ee << 24)
> +#define MHI_EE_EV_DWORD1(type) cpu_to_le32(type << 16)
> +
> +/* Command Completion event */
> +#define MHI_CC_EV_PTR(ptr) cpu_to_le64(ptr)
> +#define MHI_CC_EV_DWORD0(code) cpu_to_le32(code << 24)
> +#define MHI_CC_EV_DWORD1(type) cpu_to_le32(type << 16)
> +
> /* Transfer descriptor macros */
> #define MHI_TRE_DATA_PTR(ptr) cpu_to_le64(ptr)
> #define MHI_TRE_DATA_DWORD0(len) cpu_to_le32(len & MHI_MAX_MTU)
> diff --git a/drivers/bus/mhi/ep/internal.h b/drivers/bus/mhi/ep/internal.h
> index 48d6e9667d55..fd63f79c6aec 100644
> --- a/drivers/bus/mhi/ep/internal.h
> +++ b/drivers/bus/mhi/ep/internal.h
> @@ -131,8 +131,8 @@ enum mhi_ep_ring_type {
> };
>
> struct mhi_ep_ring_element {
> - u64 ptr;
> - u32 dword[2];
> + __le64 ptr;
> + __le32 dword[2];

Yay!

> };
>
> /* Ring element */
> @@ -227,4 +227,8 @@ void mhi_ep_mmio_get_mhi_state(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state *s
> void mhi_ep_mmio_init(struct mhi_ep_cntrl *mhi_cntrl);
> void mhi_ep_mmio_update_ner(struct mhi_ep_cntrl *mhi_cntrl);
>
> +/* MHI EP core functions */
> +int mhi_ep_send_state_change_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state state);
> +int mhi_ep_send_ee_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ep_execenv exec_env);
> +
> #endif
> diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
> index 2c8045766292..61f066c6286b 100644
> --- a/drivers/bus/mhi/ep/main.c
> +++ b/drivers/bus/mhi/ep/main.c
> @@ -18,6 +18,131 @@
>
> static DEFINE_IDA(mhi_ep_cntrl_ida);
>
> +static int mhi_ep_send_event(struct mhi_ep_cntrl *mhi_cntrl, u32 ring_idx,
> + struct mhi_ep_ring_element *el)
> +{
> + struct device *dev = &mhi_cntrl->mhi_dev->dev;
> + union mhi_ep_ring_ctx *ctx;
> + struct mhi_ep_ring *ring;
> + int ret;
> +
> + mutex_lock(&mhi_cntrl->event_lock);
> + ring = &mhi_cntrl->mhi_event[ring_idx].ring;
> + ctx = (union mhi_ep_ring_ctx *)&mhi_cntrl->ev_ctx_cache[ring_idx];
> + if (!ring->started) {
> + ret = mhi_ep_ring_start(mhi_cntrl, ring, ctx);
> + if (ret) {
> + dev_err(dev, "Error starting event ring (%d)\n", ring_idx);
> + goto err_unlock;
> + }
> + }
> +
> + /* Add element to the event ring */
> + ret = mhi_ep_ring_add_element(ring, el);
> + if (ret) {
> + dev_err(dev, "Error adding element to event ring (%d)\n", ring_idx);
> + goto err_unlock;
> + }
> +
> + /* Ensure that the ring pointer gets updated in host memory before triggering IRQ */
> + smp_wmb();

I think the barrier might already be provided by the mutex_unlock().

> +
> + mutex_unlock(&mhi_cntrl->event_lock);
> +
> + /*
> + * Raise IRQ to host only if the BEI flag is not set in TRE. Host might
> + * set this flag for interrupt moderation as per MHI protocol.
> + */

I don't think the BEI flag is meaningful in an event ring element.
You'd want to determine if it was present in the *transfer* ring
element for which this event is signaling the completion.

> + if (!MHI_EP_TRE_GET_BEI(el))
> + mhi_cntrl->raise_irq(mhi_cntrl, ring->irq_vector);
> +
> + return 0;
> +
> +err_unlock:
> + mutex_unlock(&mhi_cntrl->event_lock);
> +
> + return ret;
> +}
> +
> +static int mhi_ep_send_completion_event(struct mhi_ep_cntrl *mhi_cntrl,
> + struct mhi_ep_ring *ring, u32 len,
> + enum mhi_ev_ccs code)
> +{
> + struct mhi_ep_ring_element event = {};
> + __le32 tmp;
> +
> + event.ptr = le64_to_cpu(ring->ring_ctx->generic.rbase) +
> + ring->rd_offset * sizeof(struct mhi_ep_ring_element);

I'm not sure at the moment where this will be called. But
it might be easier to pass in the transfer channel pointer
rather than compute its address here.

> +
> + tmp = event.dword[0];

You already know event.dword[0] is zero. No need to read
its value here (or that of dword[1] below).

> + tmp |= MHI_TRE_EV_DWORD0(code, len);
> + event.dword[0] = tmp;
> +
> + tmp = event.dword[1];
> + tmp |= MHI_TRE_EV_DWORD1(ring->ch_id, MHI_PKT_TYPE_TX_EVENT);
> + event.dword[1] = tmp;
> +
> + return mhi_ep_send_event(mhi_cntrl, ring->er_index, &event);
> +}
> +
> +int mhi_ep_send_state_change_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state state)
> +{
> + struct mhi_ep_ring_element event = {};
> + __le32 tmp;
> +
> + tmp = event.dword[0];

No need to read a known zero value. (Fix this througout.)

> + tmp |= MHI_SC_EV_DWORD0(state);
> + event.dword[0] = tmp;
> +
> + tmp = event.dword[1];
> + tmp |= MHI_SC_EV_DWORD1(MHI_PKT_TYPE_STATE_CHANGE_EVENT);
> + event.dword[1] = tmp;
> +
> + return mhi_ep_send_event(mhi_cntrl, 0, &event);
> +}
> +
> +int mhi_ep_send_ee_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ep_execenv exec_env)
> +{
> + struct mhi_ep_ring_element event = {};
> + __le32 tmp;
> +
> + tmp = event.dword[0];
> + tmp |= MHI_EE_EV_DWORD0(exec_env);
> + event.dword[0] = tmp;
> +
> + tmp = event.dword[1];
> + tmp |= MHI_SC_EV_DWORD1(MHI_PKT_TYPE_EE_EVENT);
> + event.dword[1] = tmp;
> +
> + return mhi_ep_send_event(mhi_cntrl, 0, &event);
> +}
> +
> +static int mhi_ep_send_cmd_comp_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ev_ccs code)
> +{
> + struct device *dev = &mhi_cntrl->mhi_dev->dev;
> + struct mhi_ep_ring_element event = {};
> + __le32 tmp;
> +
> + if (code > MHI_EV_CC_BAD_TRE) {

I think you can probably guarantee this won't ever happen

> + dev_err(dev, "Invalid command completion code (%d)\n", code);
> + return -EINVAL;
> + }
> +
> + event.ptr = le64_to_cpu(mhi_cntrl->cmd_ctx_cache->rbase)
> + + (mhi_cntrl->mhi_cmd->ring.rd_offset *
> + (sizeof(struct mhi_ep_ring_element)));

No need for the parentheses around the sizeof() call. Here too
it might be easier and clearer to pass in the command ring element
this event is signaling the completion of.

> +
> + tmp = event.dword[0];
> + tmp |= MHI_CC_EV_DWORD0(code);
> + event.dword[0] = tmp;
> +
> + tmp = event.dword[1];
> + tmp |= MHI_CC_EV_DWORD1(MHI_PKT_TYPE_CMD_COMPLETION_EVENT);
> + event.dword[1] = tmp;
> +
> + return mhi_ep_send_event(mhi_cntrl, 0, &event);
> +}
> +
> static void mhi_ep_ring_worker(struct work_struct *work)
> {
> struct mhi_ep_cntrl *mhi_cntrl = container_of(work,
> @@ -270,6 +395,7 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl,
>
> INIT_LIST_HEAD(&mhi_cntrl->ch_db_list);
> spin_lock_init(&mhi_cntrl->list_lock);
> + mutex_init(&mhi_cntrl->event_lock);
>
> /* Set MHI version and AMSS EE before enumeration */
> mhi_ep_mmio_write(mhi_cntrl, MHIVER, config->mhi_version);
> diff --git a/include/linux/mhi_ep.h b/include/linux/mhi_ep.h
> index 33828a6c4e63..062133a68118 100644
> --- a/include/linux/mhi_ep.h
> +++ b/include/linux/mhi_ep.h
> @@ -59,6 +59,9 @@ struct mhi_ep_db_info {
> * @mhi_event: Points to the event ring configurations table
> * @mhi_cmd: Points to the command ring configurations table
> * @sm: MHI Endpoint state machine
> + * @ch_ctx_cache: Cache of host channel context data structure
> + * @ev_ctx_cache: Cache of host event context data structure
> + * @cmd_ctx_cache: Cache of host command context data structure
> * @ch_ctx_host_pa: Physical address of host channel context data structure
> * @ev_ctx_host_pa: Physical address of host event context data structure
> * @cmd_ctx_host_pa: Physical address of host command context data structure
> @@ -67,6 +70,7 @@ struct mhi_ep_db_info {
> * @ch_db_list: List of queued channel doorbells
> * @st_transition_list: List of state transitions
> * @list_lock: Lock for protecting state transition and channel doorbell lists
> + * @event_lock: Lock for protecting event rings
> * @chdb: Array of channel doorbell interrupt info
> * @raise_irq: CB function for raising IRQ to the host
> * @alloc_addr: CB function for allocating memory in endpoint for storing host context
> @@ -94,6 +98,9 @@ struct mhi_ep_cntrl {
> struct mhi_ep_cmd *mhi_cmd;
> struct mhi_ep_sm *sm;
>
> + struct mhi_chan_ctxt *ch_ctx_cache;
> + struct mhi_event_ctxt *ev_ctx_cache;
> + struct mhi_cmd_ctxt *cmd_ctx_cache;
> u64 ch_ctx_host_pa;
> u64 ev_ctx_host_pa;
> u64 cmd_ctx_host_pa;
> @@ -104,6 +111,7 @@ struct mhi_ep_cntrl {
> struct list_head ch_db_list;
> struct list_head st_transition_list;
> spinlock_t list_lock;
> + struct mutex event_lock;
> struct mhi_ep_db_info chdb[4];
>
> void (*raise_irq)(struct mhi_ep_cntrl *mhi_cntrl, u32 vector);

2022-02-22 06:19:15

by Manivannan Sadhasivam

[permalink] [raw]
Subject: Re: [PATCH v3 13/25] bus: mhi: ep: Add support for sending events to the host

On Tue, Feb 15, 2022 at 04:39:17PM -0600, Alex Elder wrote:
> On 2/12/22 12:21 PM, Manivannan Sadhasivam wrote:
> > Add support for sending the events to the host over MHI bus from the
> > endpoint. Following events are supported:
> >
> > 1. Transfer completion event
> > 2. Command completion event
> > 3. State change event
> > 4. Execution Environment (EE) change event
> >
> > An event is sent whenever an operation has been completed in the MHI EP
> > device. Event is sent using the MHI event ring and additionally the host
> > is notified using an IRQ if required.
> >
> > Signed-off-by: Manivannan Sadhasivam <[email protected]>
>
> A few things can be simplified here.
>
> -Alex
>
> > ---
> > drivers/bus/mhi/common.h | 15 ++++
> > drivers/bus/mhi/ep/internal.h | 8 ++-
> > drivers/bus/mhi/ep/main.c | 126 ++++++++++++++++++++++++++++++++++
> > include/linux/mhi_ep.h | 8 +++
> > 4 files changed, 155 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/bus/mhi/common.h b/drivers/bus/mhi/common.h
> > index 728c82928d8d..26d94ed52b34 100644
> > --- a/drivers/bus/mhi/common.h
> > +++ b/drivers/bus/mhi/common.h
> > @@ -176,6 +176,21 @@
> > #define MHI_TRE_GET_EV_LINKSPEED(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 24) & 0xFF)
> > #define MHI_TRE_GET_EV_LINKWIDTH(tre) (MHI_TRE_GET_DWORD(tre, 0) & 0xFF)
> > +/* State change event */
> > +#define MHI_SC_EV_PTR 0
> > +#define MHI_SC_EV_DWORD0(state) cpu_to_le32(state << 24)
> > +#define MHI_SC_EV_DWORD1(type) cpu_to_le32(type << 16)
> > +
> > +/* EE event */
> > +#define MHI_EE_EV_PTR 0
> > +#define MHI_EE_EV_DWORD0(ee) cpu_to_le32(ee << 24)
> > +#define MHI_EE_EV_DWORD1(type) cpu_to_le32(type << 16)
> > +
> > +/* Command Completion event */
> > +#define MHI_CC_EV_PTR(ptr) cpu_to_le64(ptr)
> > +#define MHI_CC_EV_DWORD0(code) cpu_to_le32(code << 24)
> > +#define MHI_CC_EV_DWORD1(type) cpu_to_le32(type << 16)
> > +
> > /* Transfer descriptor macros */
> > #define MHI_TRE_DATA_PTR(ptr) cpu_to_le64(ptr)
> > #define MHI_TRE_DATA_DWORD0(len) cpu_to_le32(len & MHI_MAX_MTU)
> > diff --git a/drivers/bus/mhi/ep/internal.h b/drivers/bus/mhi/ep/internal.h
> > index 48d6e9667d55..fd63f79c6aec 100644
> > --- a/drivers/bus/mhi/ep/internal.h
> > +++ b/drivers/bus/mhi/ep/internal.h
> > @@ -131,8 +131,8 @@ enum mhi_ep_ring_type {
> > };
> > struct mhi_ep_ring_element {
> > - u64 ptr;
> > - u32 dword[2];
> > + __le64 ptr;
> > + __le32 dword[2];
>
> Yay!
>
> > };
> > /* Ring element */
> > @@ -227,4 +227,8 @@ void mhi_ep_mmio_get_mhi_state(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state *s
> > void mhi_ep_mmio_init(struct mhi_ep_cntrl *mhi_cntrl);
> > void mhi_ep_mmio_update_ner(struct mhi_ep_cntrl *mhi_cntrl);
> > +/* MHI EP core functions */
> > +int mhi_ep_send_state_change_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state state);
> > +int mhi_ep_send_ee_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ep_execenv exec_env);
> > +
> > #endif
> > diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
> > index 2c8045766292..61f066c6286b 100644
> > --- a/drivers/bus/mhi/ep/main.c
> > +++ b/drivers/bus/mhi/ep/main.c

[...]

> > +static int mhi_ep_send_completion_event(struct mhi_ep_cntrl *mhi_cntrl,
> > + struct mhi_ep_ring *ring, u32 len,
> > + enum mhi_ev_ccs code)
> > +{
> > + struct mhi_ep_ring_element event = {};
> > + __le32 tmp;
> > +
> > + event.ptr = le64_to_cpu(ring->ring_ctx->generic.rbase) +
> > + ring->rd_offset * sizeof(struct mhi_ep_ring_element);
>
> I'm not sure at the moment where this will be called. But
> it might be easier to pass in the transfer channel pointer
> rather than compute its address here.
>

Passing the ring element to these functions won't help. Because, the ring
element only has the address of the buffer it points to. But what we need here
is the address of the ring element itself and that can only be found in ring
context.

Thanks,
Mani

2022-02-22 14:15:51

by Alex Elder

[permalink] [raw]
Subject: Re: [PATCH v3 13/25] bus: mhi: ep: Add support for sending events to the host

On 2/22/22 12:06 AM, Manivannan Sadhasivam wrote:
> On Tue, Feb 15, 2022 at 04:39:17PM -0600, Alex Elder wrote:
>> On 2/12/22 12:21 PM, Manivannan Sadhasivam wrote:
>>> Add support for sending the events to the host over MHI bus from the
>>> endpoint. Following events are supported:
>>>
>>> 1. Transfer completion event
>>> 2. Command completion event
>>> 3. State change event
>>> 4. Execution Environment (EE) change event
>>>
>>> An event is sent whenever an operation has been completed in the MHI EP
>>> device. Event is sent using the MHI event ring and additionally the host
>>> is notified using an IRQ if required.
>>>
>>> Signed-off-by: Manivannan Sadhasivam <[email protected]>
>>
>> A few things can be simplified here.
>>
>> -Alex
>>
>>> ---
>>> drivers/bus/mhi/common.h | 15 ++++
>>> drivers/bus/mhi/ep/internal.h | 8 ++-
>>> drivers/bus/mhi/ep/main.c | 126 ++++++++++++++++++++++++++++++++++
>>> include/linux/mhi_ep.h | 8 +++
>>> 4 files changed, 155 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/bus/mhi/common.h b/drivers/bus/mhi/common.h
>>> index 728c82928d8d..26d94ed52b34 100644
>>> --- a/drivers/bus/mhi/common.h
>>> +++ b/drivers/bus/mhi/common.h
>>> @@ -176,6 +176,21 @@
>>> #define MHI_TRE_GET_EV_LINKSPEED(tre) ((MHI_TRE_GET_DWORD(tre, 1) >> 24) & 0xFF)
>>> #define MHI_TRE_GET_EV_LINKWIDTH(tre) (MHI_TRE_GET_DWORD(tre, 0) & 0xFF)
>>> +/* State change event */
>>> +#define MHI_SC_EV_PTR 0
>>> +#define MHI_SC_EV_DWORD0(state) cpu_to_le32(state << 24)
>>> +#define MHI_SC_EV_DWORD1(type) cpu_to_le32(type << 16)
>>> +
>>> +/* EE event */
>>> +#define MHI_EE_EV_PTR 0
>>> +#define MHI_EE_EV_DWORD0(ee) cpu_to_le32(ee << 24)
>>> +#define MHI_EE_EV_DWORD1(type) cpu_to_le32(type << 16)
>>> +
>>> +/* Command Completion event */
>>> +#define MHI_CC_EV_PTR(ptr) cpu_to_le64(ptr)
>>> +#define MHI_CC_EV_DWORD0(code) cpu_to_le32(code << 24)
>>> +#define MHI_CC_EV_DWORD1(type) cpu_to_le32(type << 16)
>>> +
>>> /* Transfer descriptor macros */
>>> #define MHI_TRE_DATA_PTR(ptr) cpu_to_le64(ptr)
>>> #define MHI_TRE_DATA_DWORD0(len) cpu_to_le32(len & MHI_MAX_MTU)
>>> diff --git a/drivers/bus/mhi/ep/internal.h b/drivers/bus/mhi/ep/internal.h
>>> index 48d6e9667d55..fd63f79c6aec 100644
>>> --- a/drivers/bus/mhi/ep/internal.h
>>> +++ b/drivers/bus/mhi/ep/internal.h
>>> @@ -131,8 +131,8 @@ enum mhi_ep_ring_type {
>>> };
>>> struct mhi_ep_ring_element {
>>> - u64 ptr;
>>> - u32 dword[2];
>>> + __le64 ptr;
>>> + __le32 dword[2];
>>
>> Yay!
>>
>>> };
>>> /* Ring element */
>>> @@ -227,4 +227,8 @@ void mhi_ep_mmio_get_mhi_state(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state *s
>>> void mhi_ep_mmio_init(struct mhi_ep_cntrl *mhi_cntrl);
>>> void mhi_ep_mmio_update_ner(struct mhi_ep_cntrl *mhi_cntrl);
>>> +/* MHI EP core functions */
>>> +int mhi_ep_send_state_change_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_state state);
>>> +int mhi_ep_send_ee_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_ep_execenv exec_env);
>>> +
>>> #endif
>>> diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
>>> index 2c8045766292..61f066c6286b 100644
>>> --- a/drivers/bus/mhi/ep/main.c
>>> +++ b/drivers/bus/mhi/ep/main.c
>
> [...]
>
>>> +static int mhi_ep_send_completion_event(struct mhi_ep_cntrl *mhi_cntrl,
>>> + struct mhi_ep_ring *ring, u32 len,
>>> + enum mhi_ev_ccs code)
>>> +{
>>> + struct mhi_ep_ring_element event = {};
>>> + __le32 tmp;
>>> +
>>> + event.ptr = le64_to_cpu(ring->ring_ctx->generic.rbase) +
>>> + ring->rd_offset * sizeof(struct mhi_ep_ring_element);
>>
>> I'm not sure at the moment where this will be called. But
>> it might be easier to pass in the transfer channel pointer
>> rather than compute its address here.

As I recall, I made this comment thinking that in the context of
the caller, the ring element address might be known; but I didn't
look at those calling locations to see.

In any case, what you do here looks correct, so that's fine.

-Alex

> Passing the ring element to these functions won't help. Because, the ring
> element only has the address of the buffer it points to. But what we need here
> is the address of the ring element itself and that can only be found in ring
> context.
>
> Thanks,
> Mani