2003-01-01 10:11:45

by Soeren Sonnenburg

[permalink] [raw]
Subject: 2.4.21-pre2 harddisk not in /proc/partitions with pdc_new

Hi!

As of 2.4.21-pre harddisks that I attach to a secondary PDC20268 don't
show up (although correctly detected) in /proc/partitions. Instead the
/dev/hda's partition table is cloned ...

As this box has two pdc20268 (promise tx2) ide controllers I can
reproduce this behaviour on both of them with different harddisks.

Linux was booting using a harddisk on the onboard via vt8235 chipset
(asus a7v8x).

This problem does not occur with 2.4.20.

I will happily supply additional information if needed.

Thanks,
Soeren.


2003-01-01 19:51:55

by Alan

[permalink] [raw]
Subject: Re: 2.4.21-pre2 harddisk not in /proc/partitions with pdc_new

On Wed, 2003-01-01 at 10:18, Soeren Sonnenburg wrote:
> As this box has two pdc20268 (promise tx2) ide controllers I can
> reproduce this behaviour on both of them with different harddisks.
>
> Linux was booting using a harddisk on the onboard via vt8235 chipset
> (asus a7v8x).
>
> This problem does not occur with 2.4.20.
>
> I will happily supply additional information if needed.

Please provide a full lspci and also the dmesg of the boot. I know what
this might be, the boot logs should confirm my suspicion one way or
another

2003-01-01 20:32:18

by Soeren Sonnenburg

[permalink] [raw]
Subject: Re: 2.4.21-pre2 harddisk not in /proc/partitions with pdc_new

On Wed, 2003-01-01 at 21:42, Alan Cox wrote:
> On Wed, 2003-01-01 at 10:18, Soeren Sonnenburg wrote:
> > As this box has two pdc20268 (promise tx2) ide controllers I can
> > reproduce this behaviour on both of them with different harddisks.
> >
> > Linux was booting using a harddisk on the onboard via vt8235 chipset
> > (asus a7v8x).
> >
> > This problem does not occur with 2.4.20.
> >
> > I will happily supply additional information if needed.
>
> Please provide a full lspci and also the dmesg of the boot. I know what
> this might be, the boot logs should confirm my suspicion one way or
> another

Atm I have the disks on the secondary controllers (dmesg) ... IIRC I did
one where the drive was on the primary controller ... should be in
dmesg_prim... I will switch the drive again if needed.

Soeren.


Attachments:
dmesg (14.66 kB)
lspci (11.12 kB)
dmesg_prim (13.54 kB)
Download all attachments