Lockless MCE(machine check exception) is ported from
x86-64 to i386. This patch is for preparation.
1. rename mce.c(i386)
2. delete k7.c, mce.h(i386), non-fatal.c, p4.c and p6.c
3. move mce.h from include/asm-x86_64 to arch/x86_64/kernel
Signed-off-by: Racing Guo <[email protected]>
---
arch/i386/kernel/cpu/mcheck/init.c | 77 +++++++++
arch/i386/kernel/cpu/mcheck/k7.c | 97 -----------
arch/i386/kernel/cpu/mcheck/mce.c | 77 ---------
arch/i386/kernel/cpu/mcheck/mce.h | 14 -
arch/i386/kernel/cpu/mcheck/non-fatal.c | 93 ----------
arch/i386/kernel/cpu/mcheck/p4.c | 271 --------------------------------
arch/i386/kernel/cpu/mcheck/p6.c | 115 -------------
arch/x86_64/kernel/mce.h | 80 +++++++++
include/asm-x86_64/mce.h | 80 ---------
9 files changed, 157 insertions(+), 747 deletions(-)
diff -rNu 2.6.11.10/arch/i386/kernel/cpu/mcheck/init.c 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/init.c
--- 2.6.11.10/arch/i386/kernel/cpu/mcheck/init.c 1970-01-01 08:00:00.000000000 +0800
+++ 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/init.c 2005-05-18 16:57:16.000000000 +0800
@@ -0,0 +1,77 @@
+/*
+ * mce.c - x86 Machine Check Exception Reporting
+ * (c) 2002 Alan Cox <[email protected]>, Dave Jones <[email protected]>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+
+#include "mce.h"
+
+int mce_disabled __initdata = 0;
+int nr_mce_banks;
+
+EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
+
+/* Handle unconfigured int18 (should never happen) */
+static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_code)
+{
+ printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
+
+/* This has to be run for each processor */
+void __init mcheck_init(struct cpuinfo_x86 *c)
+{
+ if (mce_disabled==1)
+ return;
+
+ switch (c->x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (c->x86==6 || c->x86==15)
+ amd_mcheck_init(c);
+ break;
+
+ case X86_VENDOR_INTEL:
+ if (c->x86==5)
+ intel_p5_mcheck_init(c);
+ if (c->x86==6)
+ intel_p6_mcheck_init(c);
+ if (c->x86==15)
+ intel_p4_mcheck_init(c);
+ break;
+
+ case X86_VENDOR_CENTAUR:
+ if (c->x86==5)
+ winchip_mcheck_init(c);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int __init mcheck_disable(char *str)
+{
+ mce_disabled = 1;
+ return 0;
+}
+
+static int __init mcheck_enable(char *str)
+{
+ mce_disabled = -1;
+ return 0;
+}
+
+__setup("nomce", mcheck_disable);
+__setup("mce", mcheck_enable);
diff -rNu 2.6.11.10/arch/i386/kernel/cpu/mcheck/k7.c 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/k7.c
--- 2.6.11.10/arch/i386/kernel/cpu/mcheck/k7.c 2005-05-17 01:50:30.000000000 +0800
+++ 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/k7.c 1970-01-01 08:00:00.000000000 +0800
@@ -1,97 +0,0 @@
-/*
- * Athlon/Hammer specific Machine Check Exception Reporting
- * (C) Copyright 2002 Dave Jones <[email protected]>
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/config.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/msr.h>
-
-#include "mce.h"
-
-/* Machine Check Handler For AMD Athlon/Duron */
-static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
-{
- int recover=1;
- u32 alow, ahigh, high, low;
- u32 mcgstl, mcgsth;
- int i;
-
- rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
- if (mcgstl & (1<<0)) /* Recoverable ? */
- recover=0;
-
- printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
- smp_processor_id(), mcgsth, mcgstl);
-
- for (i=1; i<nr_mce_banks; i++) {
- rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
- if (high&(1<<31)) {
- if (high & (1<<29))
- recover |= 1;
- if (high & (1<<25))
- recover |= 2;
- printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
- high &= ~(1<<31);
- if (high & (1<<27)) {
- rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
- printk ("[%08x%08x]", ahigh, alow);
- }
- if (high & (1<<26)) {
- rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
- printk (" at %08x%08x", ahigh, alow);
- }
- printk ("\n");
- /* Clear it */
- wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
- /* Serialize */
- wmb();
- add_taint(TAINT_MACHINE_CHECK);
- }
- }
-
- if (recover&2)
- panic ("CPU context corrupt");
- if (recover&1)
- panic ("Unable to continue");
- printk (KERN_EMERG "Attempting to continue.\n");
- mcgstl &= ~(1<<2);
- wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
-}
-
-
-/* AMD K7 machine check is Intel like */
-void __init amd_mcheck_init(struct cpuinfo_x86 *c)
-{
- u32 l, h;
- int i;
-
- machine_check_vector = k7_machine_check;
- wmb();
-
- printk (KERN_INFO "Intel machine check architecture supported.\n");
- rdmsr (MSR_IA32_MCG_CAP, l, h);
- if (l & (1<<8)) /* Control register present ? */
- wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
- nr_mce_banks = l & 0xff;
-
- /* Clear status for MC index 0 separately, we don't touch CTL,
- * as some Athlons cause spurious MCEs when its enabled. */
- wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
- for (i=1; i<nr_mce_banks; i++) {
- wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
- wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
- }
-
- set_in_cr4 (X86_CR4_MCE);
- printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
- smp_processor_id());
-}
diff -rNu 2.6.11.10/arch/i386/kernel/cpu/mcheck/mce.c 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/mce.c
--- 2.6.11.10/arch/i386/kernel/cpu/mcheck/mce.c 2005-05-17 01:50:30.000000000 +0800
+++ 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/mce.c 1970-01-01 08:00:00.000000000 +0800
@@ -1,77 +0,0 @@
-/*
- * mce.c - x86 Machine Check Exception Reporting
- * (c) 2002 Alan Cox <[email protected]>, Dave Jones <[email protected]>
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/thread_info.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-
-#include "mce.h"
-
-int mce_disabled __initdata = 0;
-int nr_mce_banks;
-
-EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
-
-/* Handle unconfigured int18 (should never happen) */
-static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_code)
-{
- printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
-}
-
-/* Call the installed machine check handler for this CPU setup. */
-void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
-
-/* This has to be run for each processor */
-void __init mcheck_init(struct cpuinfo_x86 *c)
-{
- if (mce_disabled==1)
- return;
-
- switch (c->x86_vendor) {
- case X86_VENDOR_AMD:
- if (c->x86==6 || c->x86==15)
- amd_mcheck_init(c);
- break;
-
- case X86_VENDOR_INTEL:
- if (c->x86==5)
- intel_p5_mcheck_init(c);
- if (c->x86==6)
- intel_p6_mcheck_init(c);
- if (c->x86==15)
- intel_p4_mcheck_init(c);
- break;
-
- case X86_VENDOR_CENTAUR:
- if (c->x86==5)
- winchip_mcheck_init(c);
- break;
-
- default:
- break;
- }
-}
-
-static int __init mcheck_disable(char *str)
-{
- mce_disabled = 1;
- return 0;
-}
-
-static int __init mcheck_enable(char *str)
-{
- mce_disabled = -1;
- return 0;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce", mcheck_enable);
diff -rNu 2.6.11.10/arch/i386/kernel/cpu/mcheck/mce.h 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/mce.h
--- 2.6.11.10/arch/i386/kernel/cpu/mcheck/mce.h 2005-05-17 01:50:30.000000000 +0800
+++ 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/mce.h 1970-01-01 08:00:00.000000000 +0800
@@ -1,14 +0,0 @@
-#include <linux/init.h>
-
-void amd_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
-void winchip_mcheck_init(struct cpuinfo_x86 *c);
-
-/* Call the installed machine check handler for this CPU setup. */
-extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code);
-
-extern int mce_disabled __initdata;
-extern int nr_mce_banks;
-
diff -rNu 2.6.11.10/arch/i386/kernel/cpu/mcheck/non-fatal.c 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/non-fatal.c
--- 2.6.11.10/arch/i386/kernel/cpu/mcheck/non-fatal.c 2005-05-17 01:50:30.000000000 +0800
+++ 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/non-fatal.c 1970-01-01 08:00:00.000000000 +0800
@@ -1,93 +0,0 @@
-/*
- * Non Fatal Machine Check Exception Reporting
- *
- * (C) Copyright 2002 Dave Jones. <[email protected]>
- *
- * This file contains routines to check for non-fatal MCEs every 15s
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/config.h>
-#include <linux/irq.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/msr.h>
-
-#include "mce.h"
-
-static int firstbank;
-
-#define MCE_RATE 15*HZ /* timer rate is 15s */
-
-static void mce_checkregs (void *info)
-{
- u32 low, high;
- int i;
-
- for (i=firstbank; i<nr_mce_banks; i++) {
- rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
-
- if (high & (1<<31)) {
- printk(KERN_INFO "MCE: The hardware reports a non "
- "fatal, correctable incident occurred on "
- "CPU %d.\n",
- smp_processor_id());
- printk (KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
-
- /* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
- wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-
- /* Serialize */
- wmb();
- add_taint(TAINT_MACHINE_CHECK);
- }
- }
-}
-
-static void mce_work_fn(void *data);
-static DECLARE_WORK(mce_work, mce_work_fn, NULL);
-
-static void mce_work_fn(void *data)
-{
- on_each_cpu(mce_checkregs, NULL, 1, 1);
- schedule_delayed_work(&mce_work, MCE_RATE);
-}
-
-static int __init init_nonfatal_mce_checker(void)
-{
- struct cpuinfo_x86 *c = &boot_cpu_data;
-
- /* Check for MCE support */
- if (!cpu_has(c, X86_FEATURE_MCE))
- return -ENODEV;
-
- /* Check for PPro style MCA */
- if (!cpu_has(c, X86_FEATURE_MCA))
- return -ENODEV;
-
- /* Some Athlons misbehave when we frob bank 0 */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 == 6)
- firstbank = 1;
- else
- firstbank = 0;
-
- /*
- * Check for non-fatal errors every MCE_RATE s
- */
- schedule_delayed_work(&mce_work, MCE_RATE);
- printk(KERN_INFO "Machine check exception polling timer started.\n");
- return 0;
-}
-module_init(init_nonfatal_mce_checker);
-
-MODULE_LICENSE("GPL");
diff -rNu 2.6.11.10/arch/i386/kernel/cpu/mcheck/p4.c 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/p4.c
--- 2.6.11.10/arch/i386/kernel/cpu/mcheck/p4.c 2005-05-17 01:50:30.000000000 +0800
+++ 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/p4.c 1970-01-01 08:00:00.000000000 +0800
@@ -1,271 +0,0 @@
-/*
- * P4 specific Machine Check Exception Reporting
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/config.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/msr.h>
-#include <asm/apic.h>
-
-#include "mce.h"
-
-/* as supported by the P4/Xeon family */
-struct intel_mce_extended_msrs {
- u32 eax;
- u32 ebx;
- u32 ecx;
- u32 edx;
- u32 esi;
- u32 edi;
- u32 ebp;
- u32 esp;
- u32 eflags;
- u32 eip;
- /* u32 *reserved[]; */
-};
-
-static int mce_num_extended_msrs = 0;
-
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-static void unexpected_thermal_interrupt(struct pt_regs *regs)
-{
- printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
- smp_processor_id());
- add_taint(TAINT_MACHINE_CHECK);
-}
-
-/* P4/Xeon Thermal transition interrupt handler */
-static void intel_thermal_interrupt(struct pt_regs *regs)
-{
- u32 l, h;
- unsigned int cpu = smp_processor_id();
- static unsigned long next[NR_CPUS];
-
- ack_APIC_irq();
-
- if (time_after(next[cpu], jiffies))
- return;
-
- next[cpu] = jiffies + HZ*5;
- rdmsr(MSR_IA32_THERM_STATUS, l, h);
- if (l & 0x1) {
- printk(KERN_EMERG "CPU%d: Temperature above threshold\n", cpu);
- printk(KERN_EMERG "CPU%d: Running in modulated clock mode\n",
- cpu);
- add_taint(TAINT_MACHINE_CHECK);
- } else {
- printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
- }
-}
-
-/* Thermal interrupt handler for this CPU setup */
-static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt;
-
-fastcall void smp_thermal_interrupt(struct pt_regs *regs)
-{
- irq_enter();
- vendor_thermal_interrupt(regs);
- irq_exit();
-}
-
-/* P4/Xeon Thermal regulation detect and init */
-static void __init intel_init_thermal(struct cpuinfo_x86 *c)
-{
- u32 l, h;
- unsigned int cpu = smp_processor_id();
-
- /* Thermal monitoring */
- if (!cpu_has(c, X86_FEATURE_ACPI))
- return; /* -ENODEV */
-
- /* Clock modulation */
- if (!cpu_has(c, X86_FEATURE_ACC))
- return; /* -ENODEV */
-
- /* first check if its enabled already, in which case there might
- * be some SMM goo which handles it, so we can't even put a handler
- * since it might be delivered via SMI already -zwanem.
- */
- rdmsr (MSR_IA32_MISC_ENABLE, l, h);
- h = apic_read(APIC_LVTTHMR);
- if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
- printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
- cpu);
- return; /* -EBUSY */
- }
-
- /* check whether a vector already exists, temporarily masked? */
- if (h & APIC_VECTOR_MASK) {
- printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
- "installed\n",
- cpu, (h & APIC_VECTOR_MASK));
- return; /* -EBUSY */
- }
-
- /* The temperature transition interrupt handler setup */
- h = THERMAL_APIC_VECTOR; /* our delivery vector */
- h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */
- apic_write_around(APIC_LVTTHMR, h);
-
- rdmsr (MSR_IA32_THERM_INTERRUPT, l, h);
- wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
-
- /* ok we're good to go... */
- vendor_thermal_interrupt = intel_thermal_interrupt;
-
- rdmsr (MSR_IA32_MISC_ENABLE, l, h);
- wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
-
- l = apic_read (APIC_LVTTHMR);
- apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
- printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
- return;
-}
-#endif /* CONFIG_X86_MCE_P4THERMAL */
-
-
-/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
-static inline int intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
-{
- u32 h;
-
- if (mce_num_extended_msrs == 0)
- goto done;
-
- rdmsr (MSR_IA32_MCG_EAX, r->eax, h);
- rdmsr (MSR_IA32_MCG_EBX, r->ebx, h);
- rdmsr (MSR_IA32_MCG_ECX, r->ecx, h);
- rdmsr (MSR_IA32_MCG_EDX, r->edx, h);
- rdmsr (MSR_IA32_MCG_ESI, r->esi, h);
- rdmsr (MSR_IA32_MCG_EDI, r->edi, h);
- rdmsr (MSR_IA32_MCG_EBP, r->ebp, h);
- rdmsr (MSR_IA32_MCG_ESP, r->esp, h);
- rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h);
- rdmsr (MSR_IA32_MCG_EIP, r->eip, h);
-
- /* can we rely on kmalloc to do a dynamic
- * allocation for the reserved registers?
- */
-done:
- return mce_num_extended_msrs;
-}
-
-static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
-{
- int recover=1;
- u32 alow, ahigh, high, low;
- u32 mcgstl, mcgsth;
- int i;
- struct intel_mce_extended_msrs dbg;
-
- rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
- if (mcgstl & (1<<0)) /* Recoverable ? */
- recover=0;
-
- printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
- smp_processor_id(), mcgsth, mcgstl);
-
- if (intel_get_extended_msrs(&dbg)) {
- printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n",
- smp_processor_id(), dbg.eip, dbg.eflags);
- printk (KERN_DEBUG "\teax: %08x ebx: %08x ecx: %08x edx: %08x\n",
- dbg.eax, dbg.ebx, dbg.ecx, dbg.edx);
- printk (KERN_DEBUG "\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
- dbg.esi, dbg.edi, dbg.ebp, dbg.esp);
- }
-
- for (i=0; i<nr_mce_banks; i++) {
- rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
- if (high & (1<<31)) {
- if (high & (1<<29))
- recover |= 1;
- if (high & (1<<25))
- recover |= 2;
- printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
- high &= ~(1<<31);
- if (high & (1<<27)) {
- rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
- printk ("[%08x%08x]", ahigh, alow);
- }
- if (high & (1<<26)) {
- rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
- printk (" at %08x%08x", ahigh, alow);
- }
- printk ("\n");
- }
- }
-
- if (recover & 2)
- panic ("CPU context corrupt");
- if (recover & 1)
- panic ("Unable to continue");
-
- printk(KERN_EMERG "Attempting to continue.\n");
- /*
- * Do not clear the MSR_IA32_MCi_STATUS if the error is not
- * recoverable/continuable.This will allow BIOS to look at the MSRs
- * for errors if the OS could not log the error.
- */
- for (i=0; i<nr_mce_banks; i++) {
- u32 msr;
- msr = MSR_IA32_MC0_STATUS+i*4;
- rdmsr (msr, low, high);
- if (high&(1<<31)) {
- /* Clear it */
- wrmsr(msr, 0UL, 0UL);
- /* Serialize */
- wmb();
- add_taint(TAINT_MACHINE_CHECK);
- }
- }
- mcgstl &= ~(1<<2);
- wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
-}
-
-
-void __init intel_p4_mcheck_init(struct cpuinfo_x86 *c)
-{
- u32 l, h;
- int i;
-
- machine_check_vector = intel_machine_check;
- wmb();
-
- printk (KERN_INFO "Intel machine check architecture supported.\n");
- rdmsr (MSR_IA32_MCG_CAP, l, h);
- if (l & (1<<8)) /* Control register present ? */
- wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
- nr_mce_banks = l & 0xff;
-
- for (i=0; i<nr_mce_banks; i++) {
- wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
- wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
- }
-
- set_in_cr4 (X86_CR4_MCE);
- printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
- smp_processor_id());
-
- /* Check for P4/Xeon extended MCE MSRs */
- rdmsr (MSR_IA32_MCG_CAP, l, h);
- if (l & (1<<9)) {/* MCG_EXT_P */
- mce_num_extended_msrs = (l >> 16) & 0xff;
- printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
- " available\n",
- smp_processor_id(), mce_num_extended_msrs);
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
- /* Check for P4/Xeon Thermal monitor */
- intel_init_thermal(c);
-#endif
- }
-}
diff -rNu 2.6.11.10/arch/i386/kernel/cpu/mcheck/p6.c 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/p6.c
--- 2.6.11.10/arch/i386/kernel/cpu/mcheck/p6.c 2005-05-17 01:50:30.000000000 +0800
+++ 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/p6.c 1970-01-01 08:00:00.000000000 +0800
@@ -1,115 +0,0 @@
-/*
- * P6 specific Machine Check Exception Reporting
- * (C) Copyright 2002 Alan Cox <[email protected]>
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/msr.h>
-
-#include "mce.h"
-
-/* Machine Check Handler For PII/PIII */
-static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
-{
- int recover=1;
- u32 alow, ahigh, high, low;
- u32 mcgstl, mcgsth;
- int i;
-
- rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
- if (mcgstl & (1<<0)) /* Recoverable ? */
- recover=0;
-
- printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
- smp_processor_id(), mcgsth, mcgstl);
-
- for (i=0; i<nr_mce_banks; i++) {
- rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
- if (high & (1<<31)) {
- if (high & (1<<29))
- recover |= 1;
- if (high & (1<<25))
- recover |= 2;
- printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
- high &= ~(1<<31);
- if (high & (1<<27)) {
- rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
- printk ("[%08x%08x]", ahigh, alow);
- }
- if (high & (1<<26)) {
- rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
- printk (" at %08x%08x", ahigh, alow);
- }
- printk ("\n");
- }
- }
-
- if (recover & 2)
- panic ("CPU context corrupt");
- if (recover & 1)
- panic ("Unable to continue");
-
- printk (KERN_EMERG "Attempting to continue.\n");
- /*
- * Do not clear the MSR_IA32_MCi_STATUS if the error is not
- * recoverable/continuable.This will allow BIOS to look at the MSRs
- * for errors if the OS could not log the error.
- */
- for (i=0; i<nr_mce_banks; i++) {
- unsigned int msr;
- msr = MSR_IA32_MC0_STATUS+i*4;
- rdmsr (msr,low, high);
- if (high & (1<<31)) {
- /* Clear it */
- wrmsr (msr, 0UL, 0UL);
- /* Serialize */
- wmb();
- add_taint(TAINT_MACHINE_CHECK);
- }
- }
- mcgstl &= ~(1<<2);
- wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
-}
-
-/* Set up machine check reporting for processors with Intel style MCE */
-void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c)
-{
- u32 l, h;
- int i;
-
- /* Check for MCE support */
- if (!cpu_has(c, X86_FEATURE_MCE))
- return;
-
- /* Check for PPro style MCA */
- if (!cpu_has(c, X86_FEATURE_MCA))
- return;
-
- /* Ok machine check is available */
- machine_check_vector = intel_machine_check;
- wmb();
-
- printk (KERN_INFO "Intel machine check architecture supported.\n");
- rdmsr (MSR_IA32_MCG_CAP, l, h);
- if (l & (1<<8)) /* Control register present ? */
- wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
- nr_mce_banks = l & 0xff;
-
- /* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
- for (i=1; i<nr_mce_banks; i++) {
- wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
- wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
- }
-
- set_in_cr4 (X86_CR4_MCE);
- printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
- smp_processor_id());
-}
diff -rNu 2.6.11.10/arch/x86_64/kernel/mce.h 2.6.11.10-mce-prep/arch/x86_64/kernel/mce.h
--- 2.6.11.10/arch/x86_64/kernel/mce.h 1970-01-01 08:00:00.000000000 +0800
+++ 2.6.11.10-mce-prep/arch/x86_64/kernel/mce.h 2005-05-18 16:57:39.000000000 +0800
@@ -0,0 +1,80 @@
+#ifndef _ASM_MCE_H
+#define _ASM_MCE_H 1
+
+#include <asm/ioctls.h>
+#include <asm/types.h>
+
+/*
+ * Machine Check support for x86
+ */
+
+#define MCG_CTL_P (1UL<<8) /* MCG_CAP register available */
+
+#define MCG_STATUS_RIPV (1UL<<0) /* restart ip valid */
+#define MCG_STATUS_EIPV (1UL<<1) /* eip points to correct instruction */
+#define MCG_STATUS_MCIP (1UL<<2) /* machine check in progress */
+
+#define MCI_STATUS_VAL (1UL<<63) /* valid error */
+#define MCI_STATUS_OVER (1UL<<62) /* previous errors lost */
+#define MCI_STATUS_UC (1UL<<61) /* uncorrected error */
+#define MCI_STATUS_EN (1UL<<60) /* error enabled */
+#define MCI_STATUS_MISCV (1UL<<59) /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1UL<<58) /* addr reg. valid */
+#define MCI_STATUS_PCC (1UL<<57) /* processor context corrupt */
+
+/* Fields are zero when not available */
+struct mce {
+ __u64 status;
+ __u64 misc;
+ __u64 addr;
+ __u64 mcgstatus;
+ __u64 rip;
+ __u64 tsc; /* cpu time stamp counter */
+ __u64 res1; /* for future extension */
+ __u64 res2; /* dito. */
+ __u8 cs; /* code segment */
+ __u8 bank; /* machine check bank */
+ __u8 cpu; /* cpu that raised the error */
+ __u8 finished; /* entry is valid */
+ __u32 pad;
+};
+
+/*
+ * This structure contains all data related to the MCE log.
+ * Also carries a signature to make it easier to find from external debugging tools.
+ * Each entry is only valid when its finished flag is set.
+ */
+
+#define MCE_LOG_LEN 32
+
+struct mce_log {
+ char signature[12]; /* "MACHINECHECK" */
+ unsigned len; /* = MCE_LOG_LEN */
+ unsigned next;
+ unsigned flags;
+ unsigned pad0;
+ struct mce entry[MCE_LOG_LEN];
+};
+
+#define MCE_OVERFLOW 0 /* bit 0 in flags means overflow */
+
+#define MCE_LOG_SIGNATURE "MACHINECHECK"
+
+#define MCE_GET_RECORD_LEN _IOR('M', 1, int)
+#define MCE_GET_LOG_LEN _IOR('M', 2, int)
+#define MCE_GETCLEAR_FLAGS _IOR('M', 3, int)
+
+/* Software defined banks */
+#define MCE_EXTENDED_BANK 128
+#define MCE_THERMAL_BANK MCE_EXTENDED_BANK + 0
+
+void mce_log(struct mce *m);
+#ifdef CONFIG_X86_MCE_INTEL
+void mce_intel_feature_init(struct cpuinfo_x86 *c);
+#else
+static inline void mce_intel_feature_init(struct cpuinfo_x86 *c)
+{
+}
+#endif
+
+#endif
diff -rNu 2.6.11.10/include/asm-x86_64/mce.h 2.6.11.10-mce-prep/include/asm-x86_64/mce.h
--- 2.6.11.10/include/asm-x86_64/mce.h 2005-05-17 01:51:39.000000000 +0800
+++ 2.6.11.10-mce-prep/include/asm-x86_64/mce.h 1970-01-01 08:00:00.000000000 +0800
@@ -1,80 +0,0 @@
-#ifndef _ASM_MCE_H
-#define _ASM_MCE_H 1
-
-#include <asm/ioctls.h>
-#include <asm/types.h>
-
-/*
- * Machine Check support for x86
- */
-
-#define MCG_CTL_P (1UL<<8) /* MCG_CAP register available */
-
-#define MCG_STATUS_RIPV (1UL<<0) /* restart ip valid */
-#define MCG_STATUS_EIPV (1UL<<1) /* eip points to correct instruction */
-#define MCG_STATUS_MCIP (1UL<<2) /* machine check in progress */
-
-#define MCI_STATUS_VAL (1UL<<63) /* valid error */
-#define MCI_STATUS_OVER (1UL<<62) /* previous errors lost */
-#define MCI_STATUS_UC (1UL<<61) /* uncorrected error */
-#define MCI_STATUS_EN (1UL<<60) /* error enabled */
-#define MCI_STATUS_MISCV (1UL<<59) /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1UL<<58) /* addr reg. valid */
-#define MCI_STATUS_PCC (1UL<<57) /* processor context corrupt */
-
-/* Fields are zero when not available */
-struct mce {
- __u64 status;
- __u64 misc;
- __u64 addr;
- __u64 mcgstatus;
- __u64 rip;
- __u64 tsc; /* cpu time stamp counter */
- __u64 res1; /* for future extension */
- __u64 res2; /* dito. */
- __u8 cs; /* code segment */
- __u8 bank; /* machine check bank */
- __u8 cpu; /* cpu that raised the error */
- __u8 finished; /* entry is valid */
- __u32 pad;
-};
-
-/*
- * This structure contains all data related to the MCE log.
- * Also carries a signature to make it easier to find from external debugging tools.
- * Each entry is only valid when its finished flag is set.
- */
-
-#define MCE_LOG_LEN 32
-
-struct mce_log {
- char signature[12]; /* "MACHINECHECK" */
- unsigned len; /* = MCE_LOG_LEN */
- unsigned next;
- unsigned flags;
- unsigned pad0;
- struct mce entry[MCE_LOG_LEN];
-};
-
-#define MCE_OVERFLOW 0 /* bit 0 in flags means overflow */
-
-#define MCE_LOG_SIGNATURE "MACHINECHECK"
-
-#define MCE_GET_RECORD_LEN _IOR('M', 1, int)
-#define MCE_GET_LOG_LEN _IOR('M', 2, int)
-#define MCE_GETCLEAR_FLAGS _IOR('M', 3, int)
-
-/* Software defined banks */
-#define MCE_EXTENDED_BANK 128
-#define MCE_THERMAL_BANK MCE_EXTENDED_BANK + 0
-
-void mce_log(struct mce *m);
-#ifdef CONFIG_X86_MCE_INTEL
-void mce_intel_feature_init(struct cpuinfo_x86 *c);
-#else
-static inline void mce_intel_feature_init(struct cpuinfo_x86 *c)
-{
-}
-#endif
-
-#endif
Lockless MCE(machine check exception) is ported from
x86-64 to i386. This patch is for implementation.
Signed-off-by: Racing Guo <[email protected]>
---
arch/i386/Kconfig | 48 ++++++++---------------------
arch/i386/defconfig | 3 -
arch/i386/kernel/apic.c | 6 +--
arch/i386/kernel/cpu/common.c | 4 +-
arch/i386/kernel/cpu/mcheck/Makefile | 6 ++-
arch/i386/kernel/cpu/mcheck/init.c | 40 ++++++------------------
arch/i386/kernel/cpu/mcheck/p5.c | 5 ---
arch/i386/kernel/cpu/mcheck/winchip.c | 2 -
arch/x86_64/kernel/mce.c | 42 ++++++++++++++++---------
arch/x86_64/kernel/mce.h | 32 +++++++++++--------
arch/x86_64/kernel/mce_intel.c | 4 +-
include/asm-i386/mach-default/entry_arch.h | 2 -
12 files changed, 86 insertions(+), 108 deletions(-)
diff -rNu 2.6.11.10-mce-prep/arch/i386/defconfig 2.6.11.10-mce-impl/arch/i386/defconfig
--- 2.6.11.10-mce-prep/arch/i386/defconfig 2005-05-18 16:57:15.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/i386/defconfig 2005-05-18 17:20:29.000000000 +0800
@@ -99,8 +99,7 @@
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
-CONFIG_X86_MCE_NONFATAL=y
-CONFIG_X86_MCE_P4THERMAL=y
+CONFIG_X86_MCE_INTEL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
diff -rNu 2.6.11.10-mce-prep/arch/i386/Kconfig 2.6.11.10-mce-impl/arch/i386/Kconfig
--- 2.6.11.10-mce-prep/arch/i386/Kconfig 2005-05-18 16:57:15.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/i386/Kconfig 2005-05-18 17:20:29.000000000 +0800
@@ -574,41 +574,21 @@
default y
config X86_MCE
- bool "Machine Check Exception"
- depends on !X86_VOYAGER
- ---help---
- Machine Check Exception support allows the processor to notify the
- kernel if it detects a problem (e.g. overheating, component failure).
- The action the kernel takes depends on the severity of the problem,
- ranging from a warning message on the console, to halting the machine.
- Your processor must be a Pentium or newer to support this - check the
- flags in /proc/cpuinfo for mce. Note that some older Pentium systems
- have a design flaw which leads to false MCE events - hence MCE is
- disabled on all P5 processors, unless explicitly enabled with "mce"
- as a boot argument. Similarly, if MCE is built in and creates a
- problem on some new non-standard machine, you can boot with "nomce"
- to disable it. MCE support simply ignores non-MCE processors like
- the 386 and 486, so nearly everyone can say Y here.
-
-config X86_MCE_NONFATAL
- tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
- depends on X86_MCE
- help
- Enabling this feature starts a timer that triggers every 5 seconds which
- will look at the machine check registers to see if anything happened.
- Non-fatal problems automatically get corrected (but still logged).
- Disable this if you don't want to see these messages.
- Seeing the messages this option prints out may be indicative of dying hardware,
- or out-of-spec (ie, overclocked) hardware.
- This option only does something on certain CPUs.
- (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
- bool "check for P4 thermal throttling interrupt."
- depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
+ bool "Machine check support" if EMBEDDED
+ default y
+ help
+ Include a machine check error handler to report hardware errors.
+ This version will require the mcelog utility to decode some
+ machine check error logs. See
+ ftp://ftp.x86-64.org/pub/linux/tools/mcelog
+
+config X86_MCE_INTEL
+ bool "Intel MCE features"
+ depends on X86_MCE && X86_LOCAL_APIC
+ default y
help
- Enabling this feature will cause a message to be printed when the P4
- enters thermal throttling.
+ Additional support for intel specific MCE features such as
+ the thermal monitor.
config TOSHIBA
tristate "Toshiba Laptop support"
diff -rNu 2.6.11.10-mce-prep/arch/i386/kernel/apic.c 2.6.11.10-mce-impl/arch/i386/kernel/apic.c
--- 2.6.11.10-mce-prep/arch/i386/kernel/apic.c 2005-05-18 16:57:16.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/i386/kernel/apic.c 2005-05-18 17:20:29.000000000 +0800
@@ -78,7 +78,7 @@
set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
/* thermal monitor LVT interrupt */
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#ifdef CONFIG_X86_MCE_INTEL
set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
}
@@ -157,7 +157,7 @@
}
/* lets not touch this if we didn't frob it */
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#ifdef CONFIG_X86_MCE_INTEL
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
@@ -174,7 +174,7 @@
if (maxlvt >= 4)
apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#ifdef CONFIG_X86_MCE_INTEL
if (maxlvt >= 5)
apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
#endif
diff -rNu 2.6.11.10-mce-prep/arch/i386/kernel/cpu/common.c 2.6.11.10-mce-impl/arch/i386/kernel/cpu/common.c
--- 2.6.11.10-mce-prep/arch/i386/kernel/cpu/common.c 2005-05-18 16:57:16.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/i386/kernel/cpu/common.c 2005-05-18 17:20:29.000000000 +0800
@@ -27,7 +27,7 @@
struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
-extern void mcheck_init(struct cpuinfo_x86 *c);
+extern void machine_check_init(struct cpuinfo_x86 *c);
extern int disable_pse;
@@ -423,7 +423,7 @@
/* Init Machine Check Exception if available. */
#ifdef CONFIG_X86_MCE
- mcheck_init(c);
+ machine_check_init(c);
#endif
}
/*
diff -rNu 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/init.c 2.6.11.10-mce-impl/arch/i386/kernel/cpu/mcheck/init.c
--- 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/init.c 2005-05-18 16:57:16.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/i386/kernel/cpu/mcheck/init.c 2005-05-19 13:55:42.000000000 +0800
@@ -14,12 +14,12 @@
#include <asm/processor.h>
#include <asm/system.h>
-#include "mce.h"
+extern int __init mce_dont_init;
+extern void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c);
+void __init winchip_mcheck_init(struct cpuinfo_x86 *c);
+void __init mcheck_init(struct cpuinfo_x86 *c);
-int mce_disabled __initdata = 0;
-int nr_mce_banks;
-
-EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
+fastcall void do_machine_check(struct pt_regs * regs, long error_code);
/* Handle unconfigured int18 (should never happen) */
static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_code)
@@ -31,24 +31,16 @@
void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
/* This has to be run for each processor */
-void __init mcheck_init(struct cpuinfo_x86 *c)
+void __init machine_check_init(struct cpuinfo_x86 *c)
{
- if (mce_disabled==1)
+ if (mce_dont_init)
return;
switch (c->x86_vendor) {
- case X86_VENDOR_AMD:
- if (c->x86==6 || c->x86==15)
- amd_mcheck_init(c);
- break;
case X86_VENDOR_INTEL:
if (c->x86==5)
intel_p5_mcheck_init(c);
- if (c->x86==6)
- intel_p6_mcheck_init(c);
- if (c->x86==15)
- intel_p4_mcheck_init(c);
break;
case X86_VENDOR_CENTAUR:
@@ -57,21 +49,9 @@
break;
default:
+ machine_check_vector = do_machine_check;
+ wmb();
+ mcheck_init(c);
break;
}
}
-
-static int __init mcheck_disable(char *str)
-{
- mce_disabled = 1;
- return 0;
-}
-
-static int __init mcheck_enable(char *str)
-{
- mce_disabled = -1;
- return 0;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce", mcheck_enable);
diff -rNu 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/Makefile 2.6.11.10-mce-impl/arch/i386/kernel/cpu/mcheck/Makefile
--- 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/Makefile 2005-05-18 16:57:16.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/i386/kernel/cpu/mcheck/Makefile 2005-05-18 17:20:29.000000000 +0800
@@ -1,2 +1,4 @@
-obj-y = mce.o k7.o p4.o p5.o p6.o winchip.o
-obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o
+obj-y := init.o mce.o p5.o winchip.o
+obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o
+mce-y += ../../../../x86_64/kernel/mce.o
+mce_intel-y += ../../../../x86_64/kernel/mce_intel.o
diff -rNu 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/p5.c 2.6.11.10-mce-impl/arch/i386/kernel/cpu/mcheck/p5.c
--- 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/p5.c 2005-05-18 16:57:16.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/i386/kernel/cpu/mcheck/p5.c 2005-05-18 17:20:29.000000000 +0800
@@ -14,7 +14,7 @@
#include <asm/system.h>
#include <asm/msr.h>
-#include "mce.h"
+extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code);
/* Machine check handler for Pentium class Intel */
static fastcall void pentium_machine_check(struct pt_regs * regs, long error_code)
@@ -37,9 +37,6 @@
if( !cpu_has(c, X86_FEATURE_MCE) )
return;
- /* Default P5 to off as its often misconnected */
- if(mce_disabled != -1)
- return;
machine_check_vector = pentium_machine_check;
wmb();
diff -rNu 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/winchip.c 2.6.11.10-mce-impl/arch/i386/kernel/cpu/mcheck/winchip.c
--- 2.6.11.10-mce-prep/arch/i386/kernel/cpu/mcheck/winchip.c 2005-05-18 16:57:16.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/i386/kernel/cpu/mcheck/winchip.c 2005-05-18 17:20:29.000000000 +0800
@@ -13,7 +13,7 @@
#include <asm/system.h>
#include <asm/msr.h>
-#include "mce.h"
+extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code);
/* Machine check handler for WinChip C6 */
static fastcall void winchip_machine_check(struct pt_regs * regs, long error_code)
diff -rNu 2.6.11.10-mce-prep/arch/x86_64/kernel/mce.c 2.6.11.10-mce-impl/arch/x86_64/kernel/mce.c
--- 2.6.11.10-mce-prep/arch/x86_64/kernel/mce.c 2005-05-18 16:57:20.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/x86_64/kernel/mce.c 2005-05-19 14:23:01.108177896 +0800
@@ -3,6 +3,7 @@
* K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs.
* Rest from unknown author(s).
* 2004 Andi Kleen. Rewrote most of it.
+ * 2005 Racing Guo port from x86_64 to i386
*/
#include <linux/init.h>
@@ -17,18 +18,18 @@
#include <linux/fs.h>
#include <asm/processor.h>
#include <asm/msr.h>
-#include <asm/mce.h>
#include <asm/kdebug.h>
#include <asm/uaccess.h>
+#include "mce.h"
#define MISC_MCELOG_MINOR 227
#define NR_BANKS 5
-static int mce_dont_init;
+int __initdata mce_dont_init = 0;
/* 0: always panic, 1: panic if deadlock possible, 2: try to avoid panic,
3: never panic or exit (for testing only) */
-static int tolerant = 1;
+static unsigned long tolerant = 1;
static int banks;
static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL };
static unsigned long console_logged;
@@ -55,7 +56,13 @@
/* When the buffer fills up discard new entries. Assume
that the earlier errors are the more interesting. */
if (entry >= MCE_LOG_LEN) {
- set_bit(MCE_OVERFLOW, &mcelog.flags);
+ /* cast &mcelog.flags to (unsigned long *) in
+ order to prevent compiler warning in i386.
+ It is OK to cast (unsigned *) to
+ (unsigned long *) in set_bit on little-endian
+ machine
+ */
+ set_bit(MCE_OVERFLOW, (unsigned long*)&mcelog.flags);
return;
}
/* Old left over entry. Skip. */
@@ -98,13 +105,16 @@
printk("\n");
}
-static void mce_panic(char *msg, struct mce *backup, unsigned long start)
+static void mce_panic(char *msg, struct mce *backup, u64 start)
{
int i;
+
+#ifdef CONFIG_X86_64
oops_begin();
+#endif
for (i = 0; i < MCE_LOG_LEN; i++) {
- unsigned long tsc = mcelog.entry[i].tsc;
- if (time_before(tsc, start))
+ u64 tsc = mcelog.entry[i].tsc;
+ if (time_before64(tsc, start))
continue;
print_mce(&mcelog.entry[i]);
if (backup && mcelog.entry[i].tsc == backup->tsc)
@@ -120,15 +130,14 @@
static int mce_available(struct cpuinfo_x86 *c)
{
- return test_bit(X86_FEATURE_MCE, &c->x86_capability) &&
- test_bit(X86_FEATURE_MCA, &c->x86_capability);
+ return test_bit(X86_FEATURE_MCE, c->x86_capability) &&
+ test_bit(X86_FEATURE_MCA, c->x86_capability);
}
/*
* The actual machine check handler
*/
-
-void do_machine_check(struct pt_regs * regs, long error_code)
+fastcall void do_machine_check(struct pt_regs * regs, long error_code)
{
struct mce m, panicm;
int nowayout = (tolerant < 1);
@@ -143,7 +152,7 @@
return;
memset(&m, 0, sizeof(struct mce));
- m.cpu = hard_smp_processor_id();
+ m.cpu = smp_processor_id();
rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
if (!(m.mcgstatus & MCG_STATUS_RIPV))
kill_it = 1;
@@ -177,8 +186,13 @@
rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr);
if (regs && (m.mcgstatus & MCG_STATUS_RIPV)) {
+#if CONFIG_X86_64
m.rip = regs->rip;
m.cs = regs->cs;
+#else
+ m.rip = regs->eip;
+ m.cs = regs->xcs;
+#endif
} else {
m.rip = 0;
m.cs = 0;
@@ -359,13 +373,13 @@
static void collect_tscs(void *data)
{
- unsigned long *cpu_tsc = (unsigned long *)data;
+ u64 *cpu_tsc = (u64 *)data;
rdtscll(cpu_tsc[smp_processor_id()]);
}
static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, loff_t *off)
{
- unsigned long cpu_tsc[NR_CPUS];
+ u64 cpu_tsc[NR_CPUS];
static DECLARE_MUTEX(mce_read_sem);
unsigned next;
char __user *buf = ubuf;
diff -rNu 2.6.11.10-mce-prep/arch/x86_64/kernel/mce.h 2.6.11.10-mce-impl/arch/x86_64/kernel/mce.h
--- 2.6.11.10-mce-prep/arch/x86_64/kernel/mce.h 2005-05-18 16:57:39.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/x86_64/kernel/mce.h 2005-05-18 18:19:23.000000000 +0800
@@ -8,19 +8,20 @@
* Machine Check support for x86
*/
-#define MCG_CTL_P (1UL<<8) /* MCG_CAP register available */
+#define MCG_CTL_P (1ULL<<8) /* MCG_CAP register available */
+#define MCG_EXT_P (1ULL<<9) /* extended MSRs present */
-#define MCG_STATUS_RIPV (1UL<<0) /* restart ip valid */
-#define MCG_STATUS_EIPV (1UL<<1) /* eip points to correct instruction */
-#define MCG_STATUS_MCIP (1UL<<2) /* machine check in progress */
-
-#define MCI_STATUS_VAL (1UL<<63) /* valid error */
-#define MCI_STATUS_OVER (1UL<<62) /* previous errors lost */
-#define MCI_STATUS_UC (1UL<<61) /* uncorrected error */
-#define MCI_STATUS_EN (1UL<<60) /* error enabled */
-#define MCI_STATUS_MISCV (1UL<<59) /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1UL<<58) /* addr reg. valid */
-#define MCI_STATUS_PCC (1UL<<57) /* processor context corrupt */
+#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
+#define MCG_STATUS_EIPV (1ULL<<1) /* eip points to correct instruction */
+#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
+
+#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
+#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
+#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
+#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
+#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
+#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
/* Fields are zero when not available */
struct mce {
@@ -52,7 +53,6 @@
unsigned len; /* = MCE_LOG_LEN */
unsigned next;
unsigned flags;
- unsigned pad0;
struct mce entry[MCE_LOG_LEN];
};
@@ -77,4 +77,10 @@
}
#endif
+/*Fix Me:copy from include/linux/jiffies.h and modify it*/
+#define time_after64(a,b) \
+ (typecheck(__u64, a) && \
+ typecheck(__u64, b) && \
+ ((__s64)(b) - (__s64)(a) < 0))
+#define time_before64(a,b) time_after64(b,a)
#endif
diff -rNu 2.6.11.10-mce-prep/arch/x86_64/kernel/mce_intel.c 2.6.11.10-mce-impl/arch/x86_64/kernel/mce_intel.c
--- 2.6.11.10-mce-prep/arch/x86_64/kernel/mce_intel.c 2005-05-18 16:57:20.000000000 +0800
+++ 2.6.11.10-mce-impl/arch/x86_64/kernel/mce_intel.c 2005-05-19 14:25:14.326925568 +0800
@@ -8,12 +8,12 @@
#include <linux/percpu.h>
#include <asm/processor.h>
#include <asm/msr.h>
-#include <asm/mce.h>
#include <asm/hw_irq.h>
+#include "mce.h"
static DEFINE_PER_CPU(unsigned long, next_check);
-asmlinkage void smp_thermal_interrupt(void)
+fastcall void smp_thermal_interrupt(void)
{
struct mce m;
diff -rNu 2.6.11.10-mce-prep/include/asm-i386/mach-default/entry_arch.h 2.6.11.10-mce-impl/include/asm-i386/mach-default/entry_arch.h
--- 2.6.11.10-mce-prep/include/asm-i386/mach-default/entry_arch.h 2005-05-18 16:57:35.000000000 +0800
+++ 2.6.11.10-mce-impl/include/asm-i386/mach-default/entry_arch.h 2005-05-18 17:20:29.000000000 +0800
@@ -27,7 +27,7 @@
BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#ifdef CONFIG_X86_MCE_INTEL
BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
#endif
On Thu, 19 May 2005, Guo Racing wrote:
> Lockless MCE(machine check exception) is ported from
> x86-64 to i386. This patch is for implementation.
You seem to be missing most of the issues people raise:
perhaps your spamfilter is too eager.
Where is Brice Goglin's #include <asm/apic.h> in mce_intel.c?
i386 machine_check_init misses calling mcheck_init in Intel
and Centaur cases, so a lot of the code is largely untested.
You need to avoid the P6 and AMD problems with bank0,
as the replaced code did.
I fear there may be more.
Hugh