Separate out the Sharp Zaurus c7x0 series specific code from the Corgi
backlight driver. Abstract model/machine specific functions to
corgi_lcd.c via sharpsl.h
This enables the driver to be used by the Zaurus cxx00 series.
Signed-Off-by: Richard Purdie <[email protected]>
Index: linux-2.6.12/drivers/video/backlight/corgi_bl.c
===================================================================
--- linux-2.6.12.orig/drivers/video/backlight/corgi_bl.c 2005-08-28 10:01:39.000000000 +0100
+++ linux-2.6.12/drivers/video/backlight/corgi_bl.c 2005-08-28 17:45:17.000000000 +0100
@@ -19,10 +19,9 @@
#include <linux/fb.h>
#include <linux/backlight.h>
-#include <asm/arch-pxa/corgi.h>
-#include <asm/hardware/scoop.h>
+#include <asm/mach-types.h>
+#include <asm/arch/sharpsl.h>
-#define CORGI_MAX_INTENSITY 0x3e
#define CORGI_DEFAULT_INTENSITY 0x1f
#define CORGI_LIMIT_MASK 0x0b
@@ -30,6 +29,7 @@
static int current_intensity = 0;
static int corgibl_limit = 0;
static DEFINE_SPINLOCK(bl_lock);
+static struct backlight_properties corgibl_data;
static void corgibl_send_intensity(int intensity)
{
@@ -43,18 +43,10 @@
intensity &= CORGI_LIMIT_MASK;
}
- /* Skip 0x20 as it will blank the display */
- if (intensity >= 0x20)
- intensity++;
-
spin_lock_irqsave(&bl_lock, flags);
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+
+ corgi_bl_set(intensity);
+
spin_unlock_irqrestore(&bl_lock, flags);
}
@@ -113,8 +105,8 @@
static int corgibl_set_intensity(struct backlight_device *bd, int intensity)
{
- if (intensity > CORGI_MAX_INTENSITY)
- intensity = CORGI_MAX_INTENSITY;
+ if (intensity > corgibl_data.max_brightness)
+ intensity = corgibl_data.max_brightness;
corgibl_send_intensity(intensity);
current_intensity=intensity;
return 0;
@@ -141,7 +133,6 @@
.owner = THIS_MODULE,
.get_power = corgibl_get_power,
.set_power = corgibl_set_power,
- .max_brightness = CORGI_MAX_INTENSITY,
.get_brightness = corgibl_get_intensity,
.set_brightness = corgibl_set_intensity,
};
@@ -150,12 +141,14 @@
static int __init corgibl_probe(struct device *dev)
{
+ corgibl_data.max_brightness=corgi_bl_max();
corgi_backlight_device = backlight_device_register ("corgi-bl",
NULL, &corgibl_data);
if (IS_ERR (corgi_backlight_device))
return PTR_ERR (corgi_backlight_device);
corgibl_set_intensity(NULL, CORGI_DEFAULT_INTENSITY);
+ corgibl_limit_intensity(0);
printk("Corgi Backlight Driver Initialized.\n");
return 0;
Index: linux-2.6.12/arch/arm/mach-pxa/corgi_lcd.c
===================================================================
--- linux-2.6.12.orig/arch/arm/mach-pxa/corgi_lcd.c 2005-08-28 10:01:51.000000000 +0100
+++ linux-2.6.12/arch/arm/mach-pxa/corgi_lcd.c 2005-08-28 17:19:28.000000000 +0100
@@ -467,3 +467,63 @@
}
}
+
+/*
+ * Corgi/Spitz Backlight Power
+ */
+int corgi_bl_max(void)
+{
+ if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky())
+ return 0x2e;
+ return 0x3e;
+}
+
+void corgi_bl_set(int intensity)
+{
+ if ((machine_is_corgi() || machine_is_shepherd() || machine_is_husky())
+ && (intensity > 0x10))
+ intensity+=0x10;
+
+ /* Skip 0x20 as it will blank the display */
+ if (intensity >= 0x20)
+ intensity++;
+
+ /* Bits 0-4 are accessed via the SSP interface */
+ corgi_ssp_blduty_set(intensity & 0x1f);
+
+ if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky()) {
+#ifdef CONFIG_PXA_SHARP_C7xx
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+ else
+ reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
+#endif
+ } else if (machine_is_spitz() || machine_is_borzoi()) {
+#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
+ /* Bit 5 is via SCOOP */
+ if (intensity & 0x0020)
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+ else
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
+
+ if (intensity)
+ set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+ else
+ reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
+#endif
+ } else if (machine_is_akita()) {
+#ifdef CONFIG_MACH_AKITA
+ /* Bit 5 is via IO-Expander */
+ if (intensity & 0x0020)
+ akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+ else
+ akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
+
+ if (intensity)
+ akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+ else
+ akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
+#endif
+ }
+}
Index: linux-2.6.12/include/asm-arm/arch-pxa/sharpsl.h
===================================================================
--- linux-2.6.12.orig/include/asm-arm/arch-pxa/sharpsl.h 2005-08-28 10:01:51.000000000 +0100
+++ linux-2.6.12/include/asm-arm/arch-pxa/sharpsl.h 2005-08-28 16:23:02.000000000 +0100
@@ -18,3 +18,9 @@
unsigned long corgi_get_hsync_len(void);
void corgi_wait_hsync(void);
+/*
+ * SharpSL Backlight
+ */
+
+int corgi_bl_max(void);
+void corgi_bl_set(int intensity);
On Tue, Sep 06, 2005 at 12:53:51PM +0100, Richard Purdie wrote:
> +/*
> + * Corgi/Spitz Backlight Power
> + */
> +int corgi_bl_max(void)
> +{
> + if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky())
> + return 0x2e;
> + return 0x3e;
Couldn't this be passed in cleanly via the device's platform data?
> +}
> +
> +void corgi_bl_set(int intensity)
> +{
Along with a function pointer for whatever's needed here for each
machine?
> + if ((machine_is_corgi() || machine_is_shepherd() || machine_is_husky())
> + && (intensity > 0x10))
> + intensity+=0x10;
> +
> + /* Skip 0x20 as it will blank the display */
> + if (intensity >= 0x20)
> + intensity++;
> +
> + /* Bits 0-4 are accessed via the SSP interface */
> + corgi_ssp_blduty_set(intensity & 0x1f);
> +
> + if (machine_is_corgi() || machine_is_shepherd() || machine_is_husky()) {
> +#ifdef CONFIG_PXA_SHARP_C7xx
> + /* Bit 5 is via SCOOP */
> + if (intensity & 0x0020)
> + set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
> + else
> + reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
> +#endif
> + } else if (machine_is_spitz() || machine_is_borzoi()) {
> +#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
> + /* Bit 5 is via SCOOP */
> + if (intensity & 0x0020)
> + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
> + else
> + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
> +
> + if (intensity)
> + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
> + else
> + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
> +#endif
> + } else if (machine_is_akita()) {
> +#ifdef CONFIG_MACH_AKITA
> + /* Bit 5 is via IO-Expander */
> + if (intensity & 0x0020)
> + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
> + else
> + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
> +
> + if (intensity)
> + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
> + else
> + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
> +#endif
> + }
> +}
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core