I wasn't able to further clean up the linker script using the
INIT_DATA_SECTION macro because of the FIXME comment for the
.init.ramfs section; when that is resolved we should convert
microblaze to use INIT_DATA_SECTION.
Signed-off-by: Tim Abbott <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: [email protected]
Cc: Sam Ravnborg <[email protected]>
---
arch/microblaze/kernel/vmlinux.lds.S | 39 +++++++---------------------------
1 files changed, 8 insertions(+), 31 deletions(-)
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index d34d38d..5e95ee0 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -13,6 +13,8 @@ OUTPUT_ARCH(microblaze)
ENTRY(_start)
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
jiffies = jiffies_64 + 4;
@@ -39,12 +41,7 @@ SECTIONS {
. = ALIGN(16);
RODATA
- . = ALIGN(16);
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
/*
* sdata2 section can go anywhere, but must be word aligned
@@ -61,12 +58,7 @@ SECTIONS {
}
_sdata = . ;
- .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
- DATA_DATA
- CONSTRUCTORS
- }
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = . ;
/* Reserve some low RAM for r0 based memory references */
@@ -74,10 +66,6 @@ SECTIONS {
r0_ram = . ;
. = . + 4096; /* a page should be enough */
- /* The initial task */
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
-
/* Under the microblaze ABI, .sdata and .sbss must be contiguous */
. = ALIGN(8);
.sdata : {
@@ -96,12 +84,7 @@ SECTIONS {
__init_begin = .;
- . = ALIGN(4096);
- .init.text : {
- _sinittext = . ;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
.init.data : {
INIT_DATA
@@ -115,21 +98,15 @@ SECTIONS {
}
.init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
+ INIT_SETUP(0)
}
.initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
+ INIT_CALLS
}
.con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ CON_INITCALL
}
SECURITY_INIT
--
1.6.3.3
Hi Tim,
Tim Abbott wrote:
> I wasn't able to further clean up the linker script using the
> INIT_DATA_SECTION macro because of the FIXME comment for the
> .init.ramfs section; when that is resolved we should convert
> microblaze to use INIT_DATA_SECTION.
>
> Signed-off-by: Tim Abbott <[email protected]>
> Cc: Michal Simek <[email protected]>
> Cc: [email protected]
> Cc: Sam Ravnborg <[email protected]>
If you want to add this patch through microblaze tree, please let me know.
Tested-by: Michal Simek <[email protected]>
Thanks,
Michal
> ---
> arch/microblaze/kernel/vmlinux.lds.S | 39 +++++++---------------------------
> 1 files changed, 8 insertions(+), 31 deletions(-)
>
> diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
> index d34d38d..5e95ee0 100644
> --- a/arch/microblaze/kernel/vmlinux.lds.S
> +++ b/arch/microblaze/kernel/vmlinux.lds.S
> @@ -13,6 +13,8 @@ OUTPUT_ARCH(microblaze)
> ENTRY(_start)
>
> #include <asm-generic/vmlinux.lds.h>
> +#include <asm/page.h>
> +#include <asm/thread_info.h>
>
> jiffies = jiffies_64 + 4;
>
> @@ -39,12 +41,7 @@ SECTIONS {
>
> . = ALIGN(16);
> RODATA
> - . = ALIGN(16);
> - __ex_table : {
> - __start___ex_table = .;
> - *(__ex_table)
> - __stop___ex_table = .;
> - }
> + EXCEPTION_TABLE(16)
>
> /*
> * sdata2 section can go anywhere, but must be word aligned
> @@ -61,12 +58,7 @@ SECTIONS {
> }
>
> _sdata = . ;
> - .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
> - DATA_DATA
> - CONSTRUCTORS
> - }
> - . = ALIGN(32);
> - .data.cacheline_aligned : { *(.data.cacheline_aligned) }
> + RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
> _edata = . ;
>
> /* Reserve some low RAM for r0 based memory references */
> @@ -74,10 +66,6 @@ SECTIONS {
> r0_ram = . ;
> . = . + 4096; /* a page should be enough */
>
> - /* The initial task */
> - . = ALIGN(8192);
> - .data.init_task : { *(.data.init_task) }
> -
> /* Under the microblaze ABI, .sdata and .sbss must be contiguous */
> . = ALIGN(8);
> .sdata : {
> @@ -96,12 +84,7 @@ SECTIONS {
>
> __init_begin = .;
>
> - . = ALIGN(4096);
> - .init.text : {
> - _sinittext = . ;
> - INIT_TEXT
> - _einittext = .;
> - }
> + INIT_TEXT_SECTION(PAGE_SIZE)
>
> .init.data : {
> INIT_DATA
> @@ -115,21 +98,15 @@ SECTIONS {
> }
>
> .init.setup : {
> - __setup_start = .;
> - *(.init.setup)
> - __setup_end = .;
> + INIT_SETUP(0)
> }
>
> .initcall.init : {
> - __initcall_start = .;
> - INITCALLS
> - __initcall_end = .;
> + INIT_CALLS
> }
>
> .con_initcall.init : {
> - __con_initcall_start = .;
> - *(.con_initcall.init)
> - __con_initcall_end = .;
> + CON_INITCALL
> }
>
> SECURITY_INIT
--
Michal Simek, Ing. (M.Eng)
w: http://www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
On Wed, 9 Sep 2009, Michal Simek wrote:
> If you want to add this patch through microblaze tree, please let me know.
I think it would be best to add it via the microblaze tree (in general I
have been adding these cleanup patches via the architecture trees when
possible).
-Tim Abbott
Tim Abbott wrote:
> On Wed, 9 Sep 2009, Michal Simek wrote:
>
>> If you want to add this patch through microblaze tree, please let me know.
>
> I think it would be best to add it via the microblaze tree (in general I
> have been adding these cleanup patches via the architecture trees when
> possible).
ok. Added to microblaze next branch.
Thanks,
Michal
>
> -Tim Abbott
> ___________________________
> microblaze-uclinux mailing list
> [email protected]
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
--
Michal Simek, Ing. (M.Eng)
w: http://www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian