The below patch is a resend due to rebasing to the current Mainline, in
of which changes a typo "kenrel" to "kernel".
Signed-off-by: Justin P. Mattock <[email protected]>
---
Documentation/feature-removal-schedule.txt | 2 +-
drivers/media/video/saa7164/saa7164-encoder.c | 2 +-
drivers/media/video/saa7164/saa7164-vbi.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 492e81d..9536652 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -226,7 +226,7 @@ Who: Zhang Rui <[email protected]>
What: CONFIG_ACPI_PROCFS_POWER
When: 2.6.39
Why: sysfs I/F for ACPI power devices, including AC and Battery,
- has been working in upstream kenrel since 2.6.24, Sep 2007.
+ has been working in upstream kernel since 2.6.24, Sep 2007.
In 2.6.37, we make the sysfs I/F always built in and this option
disabled by default.
Remove this option and the ACPI power procfs interface in 2.6.39.
diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c
index f9d5946..4003645 100644
--- a/drivers/media/video/saa7164/saa7164-encoder.c
+++ b/drivers/media/video/saa7164/saa7164-encoder.c
@@ -177,7 +177,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
}
}
- /* Allocate some kenrel kernel buffers for copying
+ /* Allocate some kernel buffers for copying
* to userpsace.
*/
len = params->numberoflines * params->pitch;
diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c
index 9e5b01c..bc1fced 100644
--- a/drivers/media/video/saa7164/saa7164-vbi.c
+++ b/drivers/media/video/saa7164/saa7164-vbi.c
@@ -148,7 +148,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port)
}
}
- /* Allocate some kenrel kernel buffers for copying
+ /* Allocate some kernel buffers for copying
* to userpsace.
*/
len = params->numberoflines * params->pitch;
--
1.7.4.4
The patch below is a resend due to rebasing to the current Mainline,
fixing some comments with one to many ttt's in the comments.
Signed-off-by: Justin P. Mattock <[email protected]>
---
arch/ia64/hp/common/sba_iommu.c | 2 +-
drivers/firmware/efivars.c | 2 +-
drivers/macintosh/therm_pm72.c | 4 ++--
drivers/media/dvb/dvb-usb/dw2102.c | 2 +-
drivers/message/i2o/README.ioctl | 2 +-
drivers/net/s2io.c | 2 +-
drivers/net/ucc_geth_ethtool.c | 2 +-
drivers/net/usb/usbnet.c | 2 +-
drivers/scsi/lpfc/lpfc_hw.h | 2 +-
drivers/tty/n_gsm.c | 2 +-
drivers/usb/host/imx21-dbg.c | 2 +-
drivers/usb/misc/usbtest.c | 2 +-
fs/nfsd/stats.c | 2 +-
fs/xfs/xfs_inode.c | 2 +-
include/linux/posix-clock.h | 2 +-
15 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 4ce8d13..ab3ccab 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1063,7 +1063,7 @@ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
/*
** Address does not fall w/in IOVA, must be bypassing
*/
- DBG_BYPASS("sba_unmap_single_atttrs() bypass addr: 0x%lx\n",
+ DBG_BYPASS("sba_unmap_single_attrs() bypass addr: 0x%lx\n",
iova);
#ifdef ENABLE_MARK_CLEAN
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index ff0c373..5629a0c 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -321,7 +321,7 @@ efivar_show_raw(struct efivar_entry *entry, char *buf)
/*
* Generic read/write functions that call the specific functions of
- * the atttributes...
+ * the attributes...
*/
static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index bb8b722..0ff92c2 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -44,11 +44,11 @@
* TODO: - Check MPU structure version/signature
* - Add things like /sbin/overtemp for non-critical
* overtemp conditions so userland can take some policy
- * decisions, like slewing down CPUs
+ * decisions, like slowing down CPUs
* - Deal with fan and i2c failures in a better way
* - Maybe do a generic PID based on params used for
* U3 and Drives ? Definitely need to factor code a bit
- * bettter... also make sensor detection more robust using
+ * better... also make sensor detection more robust using
* the device-tree to probe for them
* - Figure out how to get the slots consumption and set the
* slots fan accordingly
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index f5b9da1..d312323 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1377,7 +1377,7 @@ static struct rc_map_table rc_map_su3000_table[] = {
{ 0x0f, KEY_BLUE }, /* bottom yellow button */
{ 0x14, KEY_AUDIO }, /* Snapshot */
{ 0x38, KEY_TV }, /* TV/Radio */
- { 0x0c, KEY_ESC } /* upper Red buttton */
+ { 0x0c, KEY_ESC } /* upper Red button */
};
static struct rc_map_dvb_usb_table_table keys_tables[] = {
diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl
index 65c0c47..5fb195af4 100644
--- a/drivers/message/i2o/README.ioctl
+++ b/drivers/message/i2o/README.ioctl
@@ -110,7 +110,7 @@ V. Getting Logical Configuration Table
ENOBUFS Buffer not large enough. If this occurs, the required
buffer length is written into *(lct->reslen)
-VI. Settting Parameters
+VI. Setting Parameters
SYNOPSIS
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 337bdcd..665c3d8 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7231,7 +7231,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
* no intention of processing the Rx frame at this pointwe are
- * just settting the ownership bit of rxd in Each Rx
+ * just setting the ownership bit of rxd in Each Rx
* ring to HW and set the appropriate buffer size
* based on the ring mode
*/
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 6f92e48..cfd8881 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
* Author: Li Yang <[email protected]>
*
* Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
* Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 069c1cf..fef9ecc 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -109,7 +109,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
/* take the first altsetting with in-bulk + out-bulk;
* remember any status endpoint, just in case;
- * ignore other endpoints and altsetttings.
+ * ignore other endpoints and altsettings.
*/
for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
struct usb_host_endpoint *e;
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 95f11ed..86b6f7e 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1002,7 +1002,7 @@ typedef struct _ELS_PKT { /* Structure is in Big Endian format */
#define SLI_MGMT_GRPL 0x102 /* Get registered Port list */
#define SLI_MGMT_GPAT 0x110 /* Get Port attributes */
#define SLI_MGMT_RHBA 0x200 /* Register HBA */
-#define SLI_MGMT_RHAT 0x201 /* Register HBA atttributes */
+#define SLI_MGMT_RHAT 0x201 /* Register HBA attributes */
#define SLI_MGMT_RPRT 0x210 /* Register Port */
#define SLI_MGMT_RPA 0x211 /* Register Port attributes */
#define SLI_MGMT_DHBA 0x300 /* De-register HBA */
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 47f8cdb..5f94b85 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2124,7 +2124,7 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
/**
* gsmld_detach_gsm - stop doing 0710 mux
- * @tty: tty atttached to the mux
+ * @tty: tty attached to the mux
* @gsm: mux
*
* Shutdown and then clean up the resources used by the line discipline
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
index 512f647..6d75334 100644
--- a/drivers/usb/host/imx21-dbg.c
+++ b/drivers/usb/host/imx21-dbg.c
@@ -384,7 +384,7 @@ static void debug_isoc_show_one(struct seq_file *s,
seq_printf(s, "%s %d:\n"
"cc=0X%02X\n"
"scheduled frame %d (%d)\n"
- "submittted frame %d (%d)\n"
+ "submitted frame %d (%d)\n"
"completed frame %d (%d)\n"
"requested length=%d\n"
"completed length=%d\n\n",
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 388cc12..ff9a01f 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -104,7 +104,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
alt = intf->altsetting + tmp;
/* take the first altsetting with in-bulk + out-bulk;
- * ignore other endpoints and altsetttings.
+ * ignore other endpoints and altsettings.
*/
for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
struct usb_host_endpoint *e;
diff --git a/fs/nfsd/stats.c b/fs/nfsd/stats.c
index 5232d3e..a2e2402 100644
--- a/fs/nfsd/stats.c
+++ b/fs/nfsd/stats.c
@@ -8,7 +8,7 @@
* Statistsics for the reply cache
* fh <stale> <total-lookups> <anonlookups> <dir-not-in-dcache> <nondir-not-in-dcache>
* statistics for filehandle lookup
- * io <bytes-read> <bytes-writtten>
+ * io <bytes-read> <bytes-written>
* statistics for IO throughput
* th <threads> <fullcnt> <10%-20%> <20%-30%> ... <90%-100%> <100%>
* time (seconds) when nfsd thread usage above thresholds
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index a37480a..d11ce61 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1470,7 +1470,7 @@ xfs_itruncate_finish(
* file but the log buffers containing the free and reallocation
* don't, then we'd end up with garbage in the blocks being freed.
* As long as we make the new_size permanent before actually
- * freeing any blocks it doesn't matter if they get writtten to.
+ * freeing any blocks it doesn't matter if they get written to.
*
* The callers must signal into us whether or not the size
* setting here must be synchronous. There are a few cases
diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h
index 369e19d..29ff1fa 100644
--- a/include/linux/posix-clock.h
+++ b/include/linux/posix-clock.h
@@ -44,7 +44,7 @@ struct posix_clock;
* @timer_create: Create a new timer
* @timer_delete: Remove a previously created timer
* @timer_gettime: Get remaining time and interval of a timer
- * @timer_setttime: Set a timer's initial expiration and interval
+ * @timer_settime: Set a timer's initial expiration and interval
* @fasync: Optional character device fasync method
* @mmap: Optional character device mmap method
* @open: Optional character device open method
--
1.7.4.4
The below patch is a resend due to rebasing to the current Mainline, fixing
some comments due to having one to many ccc's in the definitions.
Signed-off-by: Justin P. Mattock <[email protected]>
---
arch/m68k/include/asm/MC68EZ328.h | 2 +-
arch/m68k/include/asm/MC68VZ328.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
index 69b7f91..b2ee25d 100644
--- a/arch/m68k/include/asm/MC68EZ328.h
+++ b/arch/m68k/include/asm/MC68EZ328.h
@@ -1047,7 +1047,7 @@ typedef volatile struct {
#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
-#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
+#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occured */
#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
#define WATCHDOG_CNT_SHIFT 8
diff --git a/arch/m68k/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
index 2b9bf62..62cd79a 100644
--- a/arch/m68k/include/asm/MC68VZ328.h
+++ b/arch/m68k/include/asm/MC68VZ328.h
@@ -1143,7 +1143,7 @@ typedef struct {
#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
-#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
+#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occured */
#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
#define WATCHDOG_CNT_SHIFT 8
--
1.7.4.4
The below patch is a resend due to rebasing to the current Mainline, fixing
a typo whetehr to whether.
Signed-off-by: Justin P. Mattock <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dacabbe..63c5d62 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3040,7 +3040,7 @@ lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
pring->iocb_continueq_cnt++;
- /* Now, determine whetehr the list is completed for processing */
+ /* Now, determine whether the list is completed for processing */
irsp = &rspiocbp->iocb;
if (irsp->ulpLe) {
/*
--
1.7.4.4
The patch below is a resend due to rebasing to the current Mainline,
fixing some comments with to many sss's in the comments.
Signed-off-by: Justin P. Mattock <[email protected]>
---
.../devicetree/bindings/powerpc/nintendo/wii.txt | 2 +-
arch/arm/mach-msm/include/mach/msm_iomap.h | 2 +-
arch/arm/mach-omap2/control.h | 2 +-
arch/powerpc/include/asm/pte-hash64-64k.h | 2 +-
arch/powerpc/kernel/kgdb.c | 2 +-
arch/x86/xen/pci-swiotlb-xen.c | 2 +-
drivers/acpi/acpica/utresrc.c | 2 +-
drivers/acpi/video.c | 2 +-
drivers/media/video/msp3400-driver.c | 2 +-
drivers/net/can/pch_can.c | 2 +-
drivers/net/irda/ali-ircc.c | 2 +-
drivers/net/wan/pc300_drv.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 8 ++++----
drivers/net/wireless/ipw2x00/ipw2200.c | 2 +-
drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c | 2 +-
drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h | 2 +-
drivers/scsi/constants.c | 2 +-
drivers/scsi/esp_scsi.c | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 2 +-
drivers/scsi/nsp32_debug.c | 2 +-
drivers/scsi/pcmcia/nsp_debug.c | 2 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 2 +-
drivers/staging/bcm/Ioctl.h | 12 ++++++------
drivers/staging/cxt1e1/libsbew.h | 2 +-
drivers/staging/rt2860/rtmp.h | 2 +-
fs/btrfs/relocation.c | 2 +-
fs/freevxfs/vxfs_inode.c | 2 +-
fs/squashfs/Kconfig | 4 ++--
fs/squashfs/cache.c | 2 +-
include/net/genetlink.h | 2 +-
include/net/netlink.h | 2 +-
net/sunrpc/xprtrdma/svc_rdma_transport.c | 2 +-
32 files changed, 41 insertions(+), 41 deletions(-)
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
index a7e155a..36afa32 100644
--- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -127,7 +127,7 @@ Nintendo Wii device tree
- reg : should contain the SDHCI registers location and length
- interrupts : should contain the SDHCI interrupt
-1.j) The Inter-Processsor Communication (IPC) node
+1.j) The Inter-Processor Communication (IPC) node
Represent the Inter-Processor Communication interface. This interface
enables communications between the Broadway and the Starlet processors.
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index c98c759..2f494b6 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -55,7 +55,7 @@
#include "msm_iomap-8960.h"
-/* Virtual addressses shared across all MSM targets. */
+/* Virtual addresses shared across all MSM targets. */
#define MSM_CSR_BASE IOMEM(0xE0001000)
#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000)
#define MSM_QGIC_CPU_BASE IOMEM(0xF0001000)
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index c2804c1..a016c8b 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -236,7 +236,7 @@
#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
-/* 36xx-only RTA - Retention till Accesss control registers and bits */
+/* 36xx-only RTA - Retention till Access control registers and bits */
#define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C
#define OMAP36XX_RTA_DISABLE 0x0
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index c4490f9..59247e8 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -22,7 +22,7 @@
#define _PAGE_HASHPTE _PAGE_HPTE_SUB
/* Note the full page bits must be in the same location as for normal
- * 4k pages as the same asssembly will be used to insert 64K pages
+ * 4k pages as the same assembly will be used to insert 64K pages
* wether the kernel has CONFIG_PPC_64K_PAGES or not
*/
#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 42850ee..9411747 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -142,7 +142,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
return 0;
/*
- * On Book E and perhaps other processsors, singlestep is handled on
+ * On Book E and perhaps other processors, singlestep is handled on
* the critical exception stack. This causes current_thread_info()
* to fail, since it it locates the thread_info by masking off
* the low bits of the current stack pointer. We work around
diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
index bfd0632..b480d42 100644
--- a/arch/x86/xen/pci-swiotlb-xen.c
+++ b/arch/x86/xen/pci-swiotlb-xen.c
@@ -36,7 +36,7 @@ int __init pci_xen_swiotlb_detect(void)
/* If running as PV guest, either iommu=soft, or swiotlb=force will
* activate this IOMMU. If running as PV privileged, activate it
- * irregardlesss.
+ * irregardless.
*/
if ((xen_initial_domain() || swiotlb || swiotlb_force) &&
(xen_pv_domain()))
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 84e0518..6ffd3a8 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -50,7 +50,7 @@ ACPI_MODULE_NAME("utresrc")
#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
/*
* Strings used to decode resource descriptors.
- * Used by both the disasssembler and the debugger resource dump routines
+ * Used by both the disassembler and the debugger resource dump routines
*/
const char *acpi_gbl_bm_decode[] = {
"NotBusMaster",
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index ec574fc..db39e9e 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1521,7 +1521,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_BRIGHTNESSDOWN;
break;
- case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightnesss */
+ case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightness */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 8126622..de5d481 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -96,7 +96,7 @@ MODULE_PARM_DESC(debug, "Enable debug messages [0-3]");
MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo");
MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
-MODULE_PARM_DESC(dolby, "Activates Dolby processsing");
+MODULE_PARM_DESC(dolby, "Activates Dolby processing");
/* ---------------------------------------------------------------------- */
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index e54712b..d11fbb2 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -653,7 +653,7 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota)
u16 data_reg;
do {
- /* Reading the messsage object from the Message RAM */
+ /* Reading the message object from the Message RAM */
iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 872183f..d532dde 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -1800,7 +1800,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
MessageCount = inb(iobase+ FIR_LSR)&0x07;
if (MessageCount > 0)
- IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
+ IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
for (i=0; i<=MessageCount; i++)
{
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index f875cfa..737b59f 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -1445,7 +1445,7 @@ static void falc_update_stats(pc300_t * card, int ch)
* Description: In the remote loopback mode the clock and data recovered
* from the line inputs RL1/2 or RDIP/RDIN are routed back
* to the line outputs XL1/2 or XDOP/XDON via the analog
- * transmitter. As in normal mode they are processsed by
+ * transmitter. As in normal mode they are processed by
* the synchronizer and then sent to the system interface.
*----------------------------------------------------------------------------
*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 6eadf97..aa1ba5d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3329,26 +3329,26 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
else
cptr = AR9300_BASE_ADDR;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying EEPROM accesss at Address 0x%04x\n", cptr);
+ "Trying EEPROM access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
cptr = AR9300_BASE_ADDR_512;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying EEPROM accesss at Address 0x%04x\n", cptr);
+ "Trying EEPROM access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
read = ar9300_read_otp;
cptr = AR9300_BASE_ADDR;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying OTP accesss at Address 0x%04x\n", cptr);
+ "Trying OTP access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
cptr = AR9300_BASE_ADDR_512;
ath_dbg(common, ATH_DBG_EEPROM,
- "Trying OTP accesss at Address 0x%04x\n", cptr);
+ "Trying OTP access at Address 0x%04x\n", cptr);
if (ar9300_check_eeprom_header(ah, read, cptr))
goto found;
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 42c3fe3..87813c3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -7430,7 +7430,7 @@ static int ipw_associate_network(struct ipw_priv *priv,
priv->assoc_request.capability &=
~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME);
- IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, "
+ IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, "
"802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n",
roaming ? "Rea" : "A",
print_ssid(ssid, priv->essid, priv->essid_len),
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
index 078ed60..232aff1 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c
@@ -1,5 +1,5 @@
/*
- * Aic7xxx SCSI host adapter firmware asssembler symbol table implementation
+ * Aic7xxx SCSI host adapter firmware assembler symbol table implementation
*
* Copyright (c) 1997 Justin T. Gibbs.
* Copyright (c) 2002 Adaptec Inc.
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
index 2ba73ae..34bbcad 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
@@ -1,5 +1,5 @@
/*
- * Aic7xxx SCSI host adapter firmware asssembler symbol table definitions
+ * Aic7xxx SCSI host adapter firmware assembler symbol table definitions
*
* Copyright (c) 1997 Justin T. Gibbs.
* Copyright (c) 2002 Adaptec Inc.
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index d0c8234..d0cdde5 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -34,7 +34,7 @@
static const char * cdb_byte0_names[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
- "Reasssign Blocks",
+ "Reassign Blocks",
/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 5755852..182831e 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1059,7 +1059,7 @@ static struct esp_cmd_entry *esp_reconnect_with_tag(struct esp *esp,
esp->ops->send_dma_cmd(esp, esp->command_block_dma,
2, 2, 1, ESP_CMD_DMA | ESP_CMD_TI);
- /* ACK the msssage. */
+ /* ACK the message. */
scsi_esp_cmd(esp, ESP_CMD_MOK);
for (i = 0; i < ESP_RESELECT_TAG_LIMIT; i++) {
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 17d7893..8dcbf8f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4532,7 +4532,7 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
*
* This function is called by the lpfc_get_cfgparam() routine to set the
* module lpfc_log_verbose into the @phba cfg_log_verbose for use with
- * log messsage according to the module's lpfc_log_verbose parameter setting
+ * log message according to the module's lpfc_log_verbose parameter setting
* before hba port or vport created.
**/
static void
diff --git a/drivers/scsi/nsp32_debug.c b/drivers/scsi/nsp32_debug.c
index 2fb3fb5..58806f4 100644
--- a/drivers/scsi/nsp32_debug.c
+++ b/drivers/scsi/nsp32_debug.c
@@ -13,7 +13,7 @@ static const char unknown[] = "UNKNOWN";
static const char * group_0_commands[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
-/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
+/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks",
/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c
index 3c6ef64..6aa7d26 100644
--- a/drivers/scsi/pcmcia/nsp_debug.c
+++ b/drivers/scsi/pcmcia/nsp_debug.c
@@ -15,7 +15,7 @@ static const char unknown[] = "UNKNOWN";
static const char * group_0_commands[] = {
/* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense",
-/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks",
+/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks",
/* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown,
/* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve",
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index f9d81c8..d78b58d 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -19,7 +19,7 @@
* @mbx_cmd: data pointer for mailbox in registers.
* @mbx_sts: data pointer for mailbox out registers.
*
- * This routine isssue mailbox commands and waits for completion.
+ * This routine issue mailbox commands and waits for completion.
* If outCount is 0, this routine completes successfully WITHOUT waiting
* for the mailbox command to complete.
**/
diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h
index f859cf1..9d41c84 100644
--- a/drivers/staging/bcm/Ioctl.h
+++ b/drivers/staging/bcm/Ioctl.h
@@ -303,14 +303,14 @@ typedef enum _SECTION_TYPE
} SECTION_TYPE, *PSECTION_TYPE;
/*
-* This section provide the complete bitmap of the Flash.
-* using this map lib/APP will isssue read/write command.
+ This section provide the complete bitmap of the Flash.
+ using this map lib/APP will issue read/write command.
Fields are defined as :
Bit [0] = section is present //1:present, 0: Not present
-* Bit [1] = section is valid //1: valid, 0: not valid
-* Bit [2] = Section is R/W //0: RW, 1: RO
-* Bit [3] = Section is Active or not 1 means Active, 0->inactive
-* Bit [7...3] = Reserved
+ Bit [1] = section is valid //1: valid, 0: not valid
+ Bit [2] = Section is R/W //0: RW, 1: RO
+ Bit [3] = Section is Active or not 1 means Active, 0->inactive
+ Bit [7...3] = Reserved
*/
typedef struct _FLASH2X_BITMAP
diff --git a/drivers/staging/cxt1e1/libsbew.h b/drivers/staging/cxt1e1/libsbew.h
index 5c99646..ae8f06d 100644
--- a/drivers/staging/cxt1e1/libsbew.h
+++ b/drivers/staging/cxt1e1/libsbew.h
@@ -323,7 +323,7 @@ struct sbecom_port_param
#define CFG_CH_DINV_TX 0x02
-/* Posssible resettable chipsets/functions */
+/* Possible resettable chipsets/functions */
#define RESET_DEV_TEMUX 1
#define RESET_DEV_TECT3 RESET_DEV_TEMUX
#define RESET_DEV_PLL 2
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index 3c31340..177ae52 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -2208,7 +2208,7 @@ struct rt_tx_blk {
/* Following structure used for the characteristics of a specific packet. */
void *pPacket;
u8 *pSrcBufHeader; /* Reference to the head of sk_buff->data */
- u8 *pSrcBufData; /* Reference to the sk_buff->data, will change depending on the handling progresss */
+ u8 *pSrcBufData; /* Reference to the sk_buff->data, will change depending on the handling progress */
u32 SrcBufLen; /* Length of packet payload which not including Layer 2 header */
u8 *pExtraLlcSnapEncap; /* NULL means no extra LLC/SNAP is required */
u8 HeaderBuf[128]; /* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 199a801..f340f7c 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -709,7 +709,7 @@ again:
WARN_ON(cur->checked);
if (!list_empty(&cur->upper)) {
/*
- * the backref was added previously when processsing
+ * the backref was added previously when processing
* backref of type BTRFS_TREE_BLOCK_REF_KEY
*/
BUG_ON(!list_is_singular(&cur->upper));
diff --git a/fs/freevxfs/vxfs_inode.c b/fs/freevxfs/vxfs_inode.c
index 2ba6719..1a43114 100644
--- a/fs/freevxfs/vxfs_inode.c
+++ b/fs/freevxfs/vxfs_inode.c
@@ -272,7 +272,7 @@ vxfs_get_fake_inode(struct super_block *sbp, struct vxfs_inode_info *vip)
* *ip: VFS inode
*
* Description:
- * vxfs_put_fake_inode frees all data asssociated with @ip.
+ * vxfs_put_fake_inode frees all data associated with @ip.
*/
void
vxfs_put_fake_inode(struct inode *ip)
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index efc309f..7797218 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -42,7 +42,7 @@ config SQUASHFS_LZO
select LZO_DECOMPRESS
help
Saying Y here includes support for reading Squashfs file systems
- compressed with LZO compresssion. LZO compression is mainly
+ compressed with LZO compression. LZO compression is mainly
aimed at embedded systems with slower CPUs where the overheads
of zlib are too high.
@@ -57,7 +57,7 @@ config SQUASHFS_XZ
select XZ_DEC
help
Saying Y here includes support for reading Squashfs file systems
- compressed with XZ compresssion. XZ gives better compression than
+ compressed with XZ compression. XZ gives better compression than
the default zlib compression, at the expense of greater CPU and
memory overhead.
diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index c37b520..4b5a3fb 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -29,7 +29,7 @@
* plus functions layered ontop of the generic cache implementation to
* access the metadata and fragment caches.
*
- * To avoid out of memory and fragmentation isssues with vmalloc the cache
+ * To avoid out of memory and fragmentation issues with vmalloc the cache
* uses sequences of kmalloced PAGE_CACHE_SIZE buffers.
*
* It should be noted that the cache is not used for file datablocks, these
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index b4c7c1c..d420f28 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -260,7 +260,7 @@ static inline int genlmsg_reply(struct sk_buff *skb, struct genl_info *info)
/**
* gennlmsg_data - head of message payload
- * @gnlh: genetlink messsage header
+ * @gnlh: genetlink message header
*/
static inline void *genlmsg_data(const struct genlmsghdr *gnlh)
{
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 8a3906a..02740a9 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -290,7 +290,7 @@ static inline int nlmsg_padlen(int payload)
/**
* nlmsg_data - head of message payload
- * @nlh: netlink messsage header
+ * @nlh: netlink message header
*/
static inline void *nlmsg_data(const struct nlmsghdr *nlh)
{
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 1a10dcd..6c014dd 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -333,7 +333,7 @@ static void rq_cq_reap(struct svcxprt_rdma *xprt)
}
/*
- * Processs a completion context
+ * Process a completion context
*/
static void process_context(struct svcxprt_rdma *xprt,
struct svc_rdma_op_ctxt *ctxt)
--
1.7.4.4
On Sun, 17 Apr 2011 11:09:07 -0700 Justin P. Mattock wrote:
> The below patch is a resend due to rebasing to the current Mainline, fixing
> some comments due to having one to many ccc's in the definitions.
>
> Signed-off-by: Justin P. Mattock <[email protected]>
>
> ---
> arch/m68k/include/asm/MC68EZ328.h | 2 +-
> arch/m68k/include/asm/MC68VZ328.h | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/m68k/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
> index 69b7f91..b2ee25d 100644
> --- a/arch/m68k/include/asm/MC68EZ328.h
> +++ b/arch/m68k/include/asm/MC68EZ328.h
> @@ -1047,7 +1047,7 @@ typedef volatile struct {
>
> #define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
> #define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
> -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
> +#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occured */
occurred
(above and below)
> #define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
> #define WATCHDOG_CNT_SHIFT 8
>
> diff --git a/arch/m68k/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
> index 2b9bf62..62cd79a 100644
> --- a/arch/m68k/include/asm/MC68VZ328.h
> +++ b/arch/m68k/include/asm/MC68VZ328.h
> @@ -1143,7 +1143,7 @@ typedef struct {
>
> #define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
> #define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
> -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
> +#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occured */
> #define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
> #define WATCHDOG_CNT_SHIFT 8
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
On 04/17/2011 12:03 PM, Randy Dunlap wrote:
> On Sun, 17 Apr 2011 11:09:07 -0700 Justin P. Mattock wrote:
>
>> The below patch is a resend due to rebasing to the current Mainline, fixing
>> some comments due to having one to many ccc's in the definitions.
>>
>> Signed-off-by: Justin P. Mattock<[email protected]>
>>
>> ---
>> arch/m68k/include/asm/MC68EZ328.h | 2 +-
>> arch/m68k/include/asm/MC68VZ328.h | 2 +-
>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/m68k/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
>> index 69b7f91..b2ee25d 100644
>> --- a/arch/m68k/include/asm/MC68EZ328.h
>> +++ b/arch/m68k/include/asm/MC68EZ328.h
>> @@ -1047,7 +1047,7 @@ typedef volatile struct {
>>
>> #define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
>> #define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
>> -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
>> +#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occured */
>
> occurred
> (above and below)
yep!! made a mistake with this one, and resent..
>
>> #define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
>> #define WATCHDOG_CNT_SHIFT 8
>>
>> diff --git a/arch/m68k/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
>> index 2b9bf62..62cd79a 100644
>> --- a/arch/m68k/include/asm/MC68VZ328.h
>> +++ b/arch/m68k/include/asm/MC68VZ328.h
>> @@ -1143,7 +1143,7 @@ typedef struct {
>>
>> #define WATCHDOG_EN 0x0001 /* Watchdog Enabled */
>> #define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */
>> -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */
>> +#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occured */
>> #define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */
>> #define WATCHDOG_CNT_SHIFT 8
>
>
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
>
On Sun, 17 Apr 2011, Justin P. Mattock wrote:
> The below patch is a resend due to rebasing to the current Mainline, in
> of which changes a typo "kenrel" to "kernel".
I have folded all the patches into one, dropped the staging/ bits (which
wouldn't apply in -next anyway), and applied.
--
Jiri Kosina
SUSE Labs
On 05/10/2011 01:16 AM, Jiri Kosina wrote:
> On Sun, 17 Apr 2011, Justin P. Mattock wrote:
>
>> The below patch is a resend due to rebasing to the current Mainline, in
>> of which changes a typo "kenrel" to "kernel".
>
> I have folded all the patches into one, dropped the staging/ bits (which
> wouldn't apply in -next anyway), and applied.
>
o.k... thanks for picking those up.. if I run into any others I will
send them on up..
Justin P. Mattock