From: anish kumar <[email protected]>
External connector devices that decides connection information based on
ADC values may use adc-jack device driver. The user simply needs to
provide a table of adc range and connection states. Then, extcon
framework will automatically notify others.
Changes in V1:
added Lars-Peter Clausen suggested changes:
Using macros to get rid of boiler plate code such as devm_kzalloc
and module_platform_driver.Other changes suggested are related to
coding guidelines.
Changes in V2:
Removed some unnecessary checks and changed the way we are un-regitering
extcon and freeing the irq while removing.
Changes in V3:
Renamed the files to comply with extcon naming.
Changes in V4:
Added the cancel_work_sync during removing of driver.
Changes in this version:
Added the dependency of IIO in Kconfig.
Reviewed-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: anish kumar <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>
---
drivers/extcon/Kconfig | 6 +
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-adc-jack.c | 195 ++++++++++++++++++++++++++++++++
include/linux/extcon/extcon-adc-jack.h | 73 ++++++++++++
4 files changed, 275 insertions(+), 0 deletions(-)
create mode 100644 drivers/extcon/extcon-adc-jack.c
create mode 100644 include/linux/extcon/extcon-adc-jack.h
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index e175c8e..dd5b01b 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -21,6 +21,12 @@ config EXTCON_GPIO
Say Y here to enable GPIO based extcon support. Note that GPIO
extcon supports single state per extcon instance.
+config EXTCON_ADC_JACK
+ tristate "ADC Jack extcon support"
+ depends on IIO
+ help
+ Say Y here to enable extcon device driver based on ADC values.
+
config EXTCON_MAX77693
tristate "MAX77693 EXTCON Support"
depends on MFD_MAX77693
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 88961b3..bc7111e 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_EXTCON) += extcon_class.o
obj-$(CONFIG_EXTCON_GPIO) += extcon_gpio.o
+obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
new file mode 100644
index 0000000..5a97a35
--- /dev/null
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -0,0 +1,195 @@
+/*
+ * drivers/extcon/extcon-adc-jack.c
+ *
+ * Analog Jack extcon driver with ADC-based detection capability.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * MyungJoo Ham <[email protected]>
+ *
+ * Modified for calling to IIO to get adc by <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/iio/consumer.h>
+#include <linux/extcon/extcon-adc-jack.h>
+#include <linux/extcon.h>
+
+/**
+ * struct adc_jack_data - internal data for adc_jack device driver
+ * @edev - extcon device.
+ * @cable_names - list of supported cables.
+ * @num_cables - size of cable_names.
+ * @adc_condition - list of adc value conditions.
+ * @num_condition - size of adc_condition.
+ * @irq - irq number of attach/detach event (0 if not exist).
+ * @handling_delay - interrupt handler will schedule extcon event
+ * handling at handling_delay jiffies.
+ * @handler - extcon event handler called by interrupt handler.
+ * @chan - iio channel being queried.
+ */
+struct adc_jack_data {
+ struct extcon_dev edev;
+
+ const char **cable_names;
+ int num_cables;
+ struct adc_jack_cond *adc_condition;
+ int num_conditions;
+
+ int irq;
+ unsigned long handling_delay; /* in jiffies */
+ struct delayed_work handler;
+
+ struct iio_channel *chan;
+};
+
+static void adc_jack_handler(struct work_struct *work)
+{
+ struct adc_jack_data *data = container_of(to_delayed_work(work),
+ struct adc_jack_data,
+ handler);
+ u32 state = 0;
+ int ret, adc_val;
+ int i;
+
+ ret = iio_read_channel_raw(data->chan, &adc_val);
+ if (ret < 0) {
+ dev_err(data->edev.dev, "read channel() error: %d\n", ret);
+ return;
+ }
+
+ /* Get state from adc value with adc_condition */
+ for (i = 0; i < data->num_conditions; i++) {
+ struct adc_jack_cond *def = &data->adc_condition[i];
+ if (!def->state)
+ break;
+ if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
+ state = def->state;
+ break;
+ }
+ }
+ /* if no def has met, it means state = 0 (no cables attached) */
+
+ extcon_set_state(&data->edev, state);
+}
+
+static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
+{
+ struct adc_jack_data *data = _data;
+
+ schedule_delayed_work(&data->handler, data->handling_delay);
+ return IRQ_HANDLED;
+}
+
+static int __devinit adc_jack_probe(struct platform_device *pdev)
+{
+ struct adc_jack_data *data;
+ struct adc_jack_pdata *pdata = pdev->dev.platform_data;
+ int i, err = 0;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->edev.name = pdata->name;
+
+ if (pdata->cable_names)
+ data->edev.supported_cable = pdata->cable_names;
+ else
+ data->edev.supported_cable = extcon_cable_name;
+
+ /* Check the length of array and set num_cables */
+ for (i = 0; data->edev.supported_cable[i]; i++)
+ ;
+ if (i == 0 || i > SUPPORTED_CABLE_MAX) {
+ err = -EINVAL;
+ dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n",
+ i - 1);
+ goto out;
+ }
+ data->num_cables = i;
+
+ if (!pdata->adc_condition ||
+ !pdata->adc_condition[0].state) {
+ err = -EINVAL;
+ dev_err(&pdev->dev, "error: adc_condition not defined.\n");
+ goto out;
+ }
+ data->adc_condition = pdata->adc_condition;
+
+ /* Check the length of array and set num_conditions */
+ for (i = 0; data->adc_condition[i].state; i++)
+ ;
+ data->num_conditions = i;
+
+ data->chan = iio_channel_get(dev_name(&pdev->dev),
+ pdata->consumer_channel);
+ if (IS_ERR(data->chan)) {
+ err = PTR_ERR(data->chan);
+ goto out;
+ }
+
+ data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms);
+
+ INIT_DELAYED_WORK_DEFERRABLE(&data->handler, adc_jack_handler);
+
+ platform_set_drvdata(pdev, data);
+
+ err = extcon_dev_register(&data->edev, &pdev->dev);
+ if (err)
+ goto out;
+
+ data->irq = platform_get_irq(pdev, 0);
+ if (!data->irq) {
+ dev_err(&pdev->dev, "platform_get_irq failed\n");
+ err = -ENODEV;
+ goto err_irq;
+ }
+
+ err = request_any_context_irq(data->irq, adc_jack_irq_thread,
+ pdata->irq_flags, pdata->name, data);
+
+ if (err) {
+ dev_err(&pdev->dev, "error: irq %d\n", data->irq);
+ err = -EINVAL;
+ goto err_irq;
+ }
+
+ goto out;
+
+err_irq:
+ extcon_dev_unregister(&data->edev);
+out:
+ return err;
+}
+
+static int __devexit adc_jack_remove(struct platform_device *pdev)
+{
+ struct adc_jack_data *data = platform_get_drvdata(pdev);
+
+ free_irq(data->irq, data);
+ cancel_work_sync(&data->handler.work);
+ extcon_dev_unregister(&data->edev);
+
+ return 0;
+}
+
+static struct platform_driver adc_jack_driver = {
+ .probe = adc_jack_probe,
+ .remove = __devexit_p(adc_jack_remove),
+ .driver = {
+ .name = "adc-jack",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(adc_jack_driver);
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
new file mode 100644
index 0000000..c350615
--- /dev/null
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -0,0 +1,73 @@
+/*
+ * include/linux/extcon/extcon-adc-jack.h
+ *
+ * Analog Jack extcon driver with ADC-based detection capability.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * MyungJoo Ham <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _EXTCON_ADC_JACK_H_
+#define _EXTCON_ADC_JACK_H_ __FILE__
+
+#include <linux/module.h>
+#include <linux/extcon.h>
+
+/**
+ * struct adc_jack_cond - condition to use an extcon state
+ * @state - the corresponding extcon state (if 0, this struct denotes
+ * the last adc_jack_cond element among the array)
+ * @min_adc - min adc value for this condition
+ * @max_adc - max adc value for this condition
+ *
+ * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
+ * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
+ * 1 are attached (1<<0 | 1<<1 == 0x3)
+ *
+ * Note that you don't need to describe condition for "no cable attached"
+ * because when no adc_jack_cond is met, state = 0 is automatically chosen.
+ */
+struct adc_jack_cond {
+ u32 state; /* extcon state value. 0 if invalid */
+ u32 min_adc;
+ u32 max_adc;
+};
+
+/**
+ * struct adc_jack_pdata - platform data for adc jack device.
+ * @name - name of the extcon device. If null, "adc-jack" is used.
+ * @consumer_channel - Unique name to identify the channel on the consumer
+ * side. This typically describes the channels use within
+ * the consumer. E.g. 'battery_voltage'
+ * @cable_names - array of cable names ending with null. If the array itself
+ * if null, extcon standard cable names are chosen.
+ * @adc_contition - array of struct adc_jack_cond conditions ending
+ * with .state = 0 entry. This describes how to decode
+ * adc values into extcon state.
+ * @irq_flags - irq flags used for the @irq
+ * @handling_delay_ms - in some devices, we need to read ADC value some
+ * milli-seconds after the interrupt occurs. You may
+ * describe such delays with @handling_delay_ms, which
+ * is rounded-off by jiffies.
+ */
+struct adc_jack_pdata {
+ const char *name;
+ const char *consumer_channel;
+ /*
+ * NULL if standard extcon names are used.
+ * The last entry should be NULL
+ */
+ const char **cable_names;
+ /* The last entry's state should be 0 */
+ struct adc_jack_cond *adc_condition;
+
+ unsigned long irq_flags;
+ unsigned long handling_delay_ms; /* in ms */
+};
+
+#endif /* _EXTCON_ADC_JACK_H */
--
1.7.1
Hello,
some nitpicking below; sorry for my late reaction to the patch
regards, p.
> From: anish kumar <[email protected]>
>
> External connector devices that decides connection information based on
> ADC values may use adc-jack device driver. The user simply needs to
> provide a table of adc range and connection states. Then, extcon
> framework will automatically notify others.
>
> Changes in V1:
> added Lars-Peter Clausen suggested changes:
> Using macros to get rid of boiler plate code such as devm_kzalloc
> and module_platform_driver.Other changes suggested are related to
> coding guidelines.
>
> Changes in V2:
> Removed some unnecessary checks and changed the way we are un-regitering
> extcon and freeing the irq while removing.
>
> Changes in V3:
> Renamed the files to comply with extcon naming.
>
> Changes in V4:
> Added the cancel_work_sync during removing of driver.
>
> Changes in this version:
> Added the dependency of IIO in Kconfig.
>
> Reviewed-by: Lars-Peter Clausen <[email protected]>
> Signed-off-by: anish kumar <[email protected]>
> Signed-off-by: MyungJoo Ham <[email protected]>
> ---
> drivers/extcon/Kconfig | 6 +
> drivers/extcon/Makefile | 1 +
> drivers/extcon/extcon-adc-jack.c | 195 ++++++++++++++++++++++++++++++++
> include/linux/extcon/extcon-adc-jack.h | 73 ++++++++++++
> 4 files changed, 275 insertions(+), 0 deletions(-)
> create mode 100644 drivers/extcon/extcon-adc-jack.c
> create mode 100644 include/linux/extcon/extcon-adc-jack.h
>
> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
> index e175c8e..dd5b01b 100644
> --- a/drivers/extcon/Kconfig
> +++ b/drivers/extcon/Kconfig
> @@ -21,6 +21,12 @@ config EXTCON_GPIO
> Say Y here to enable GPIO based extcon support. Note that GPIO
> extcon supports single state per extcon instance.
>
> +config EXTCON_ADC_JACK
> + tristate "ADC Jack extcon support"
> + depends on IIO
> + help
> + Say Y here to enable extcon device driver based on ADC values.
> +
> config EXTCON_MAX77693
> tristate "MAX77693 EXTCON Support"
> depends on MFD_MAX77693
> diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
> index 88961b3..bc7111e 100644
> --- a/drivers/extcon/Makefile
> +++ b/drivers/extcon/Makefile
> @@ -4,6 +4,7 @@
>
> obj-$(CONFIG_EXTCON) += extcon_class.o
> obj-$(CONFIG_EXTCON_GPIO) += extcon_gpio.o
> +obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
> obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
> obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
> obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
> diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
> new file mode 100644
> index 0000000..5a97a35
> --- /dev/null
> +++ b/drivers/extcon/extcon-adc-jack.c
> @@ -0,0 +1,195 @@
> +/*
> + * drivers/extcon/extcon-adc-jack.c
> + *
> + * Analog Jack extcon driver with ADC-based detection capability.
> + *
> + * Copyright (C) 2012 Samsung Electronics
> + * MyungJoo Ham <[email protected]>
> + *
> + * Modified for calling to IIO to get adc by <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/slab.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/workqueue.h>
> +#include <linux/iio/consumer.h>
> +#include <linux/extcon/extcon-adc-jack.h>
> +#include <linux/extcon.h>
> +
> +/**
> + * struct adc_jack_data - internal data for adc_jack device driver
> + * @edev - extcon device.
> + * @cable_names - list of supported cables.
> + * @num_cables - size of cable_names.
> + * @adc_condition - list of adc value conditions.
> + * @num_condition - size of adc_condition.
it is num_conditions (not num_condition) in the code below
I suggest t use adc_conditions instead of adc_condition to be in line with
cable_names (vs. cable_name)
> + * @irq - irq number of attach/detach event (0 if not exist).
> + * @handling_delay - interrupt handler will schedule extcon event
> + * handling at handling_delay jiffies.
> + * @handler - extcon event handler called by interrupt handler.
> + * @chan - iio channel being queried.
> + */
> +struct adc_jack_data {
> + struct extcon_dev edev;
> +
> + const char **cable_names;
> + int num_cables;
> + struct adc_jack_cond *adc_condition;
> + int num_conditions;
> +
> + int irq;
> + unsigned long handling_delay; /* in jiffies */
> + struct delayed_work handler;
> +
> + struct iio_channel *chan;
> +};
> +
> +static void adc_jack_handler(struct work_struct *work)
> +{
> + struct adc_jack_data *data = container_of(to_delayed_work(work),
> + struct adc_jack_data,
> + handler);
> + u32 state = 0;
> + int ret, adc_val;
> + int i;
> +
> + ret = iio_read_channel_raw(data->chan, &adc_val);
> + if (ret < 0) {
> + dev_err(data->edev.dev, "read channel() error: %d\n", ret);
> + return;
> + }
> +
> + /* Get state from adc value with adc_condition */
> + for (i = 0; i < data->num_conditions; i++) {
> + struct adc_jack_cond *def = &data->adc_condition[i];
> + if (!def->state)
> + break;
> + if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
> + state = def->state;
> + break;
> + }
> + }
> + /* if no def has met, it means state = 0 (no cables attached) */
> +
> + extcon_set_state(&data->edev, state);
> +}
> +
> +static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
> +{
> + struct adc_jack_data *data = _data;
> +
> + schedule_delayed_work(&data->handler, data->handling_delay);
> + return IRQ_HANDLED;
> +}
> +
> +static int __devinit adc_jack_probe(struct platform_device *pdev)
> +{
> + struct adc_jack_data *data;
> + struct adc_jack_pdata *pdata = pdev->dev.platform_data;
> + int i, err = 0;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->edev.name = pdata->name;
> +
> + if (pdata->cable_names)
> + data->edev.supported_cable = pdata->cable_names;
> + else
> + data->edev.supported_cable = extcon_cable_name;
> +
> + /* Check the length of array and set num_cables */
> + for (i = 0; data->edev.supported_cable[i]; i++)
> + ;
> + if (i == 0 || i > SUPPORTED_CABLE_MAX) {
> + err = -EINVAL;
> + dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n",
> + i - 1);
> + goto out;
> + }
> + data->num_cables = i;
> +
> + if (!pdata->adc_condition ||
> + !pdata->adc_condition[0].state) {
> + err = -EINVAL;
> + dev_err(&pdev->dev, "error: adc_condition not defined.\n");
> + goto out;
> + }
> + data->adc_condition = pdata->adc_condition;
> +
> + /* Check the length of array and set num_conditions */
> + for (i = 0; data->adc_condition[i].state; i++)
> + ;
> + data->num_conditions = i;
> +
> + data->chan = iio_channel_get(dev_name(&pdev->dev),
> + pdata->consumer_channel);
> + if (IS_ERR(data->chan)) {
> + err = PTR_ERR(data->chan);
> + goto out;
> + }
> +
> + data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms);
> +
> + INIT_DELAYED_WORK_DEFERRABLE(&data->handler, adc_jack_handler);
> +
> + platform_set_drvdata(pdev, data);
> +
> + err = extcon_dev_register(&data->edev, &pdev->dev);
> + if (err)
> + goto out;
> +
> + data->irq = platform_get_irq(pdev, 0);
> + if (!data->irq) {
> + dev_err(&pdev->dev, "platform_get_irq failed\n");
> + err = -ENODEV;
> + goto err_irq;
> + }
> +
> + err = request_any_context_irq(data->irq, adc_jack_irq_thread,
> + pdata->irq_flags, pdata->name, data);
> +
> + if (err) {
> + dev_err(&pdev->dev, "error: irq %d\n", data->irq);
> + err = -EINVAL;
> + goto err_irq;
> + }
> +
> + goto out;
> +
> +err_irq:
> + extcon_dev_unregister(&data->edev);
> +out:
> + return err;
> +}
> +
> +static int __devexit adc_jack_remove(struct platform_device *pdev)
> +{
> + struct adc_jack_data *data = platform_get_drvdata(pdev);
> +
> + free_irq(data->irq, data);
> + cancel_work_sync(&data->handler.work);
> + extcon_dev_unregister(&data->edev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver adc_jack_driver = {
> + .probe = adc_jack_probe,
> + .remove = __devexit_p(adc_jack_remove),
> + .driver = {
> + .name = "adc-jack",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +module_platform_driver(adc_jack_driver);
> diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
> new file mode 100644
> index 0000000..c350615
> --- /dev/null
> +++ b/include/linux/extcon/extcon-adc-jack.h
> @@ -0,0 +1,73 @@
> +/*
> + * include/linux/extcon/extcon-adc-jack.h
> + *
> + * Analog Jack extcon driver with ADC-based detection capability.
> + *
> + * Copyright (C) 2012 Samsung Electronics
> + * MyungJoo Ham <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef _EXTCON_ADC_JACK_H_
> +#define _EXTCON_ADC_JACK_H_ __FILE__
> +
> +#include <linux/module.h>
> +#include <linux/extcon.h>
> +
> +/**
> + * struct adc_jack_cond - condition to use an extcon state
> + * @state - the corresponding extcon state (if 0, this struct denotes
> + * the last adc_jack_cond element among the array)
> + * @min_adc - min adc value for this condition
> + * @max_adc - max adc value for this condition
> + *
> + * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
> + * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
> + * 1 are attached (1<<0 | 1<<1 == 0x3)
> + *
> + * Note that you don't need to describe condition for "no cable attached"
> + * because when no adc_jack_cond is met, state = 0 is automatically chosen.
> + */
> +struct adc_jack_cond {
> + u32 state; /* extcon state value. 0 if invalid */
> + u32 min_adc;
> + u32 max_adc;
> +};
> +
> +/**
> + * struct adc_jack_pdata - platform data for adc jack device.
> + * @name - name of the extcon device. If null, "adc-jack" is used.
> + * @consumer_channel - Unique name to identify the channel on the consumer
> + * side. This typically describes the channels use within
channels use_d_ within
> + * the consumer. E.g. 'battery_voltage'
> + * @cable_names - array of cable names ending with null. If the array itself
> + * if null, extcon standard cable names are chosen.
> + * @adc_contition - array of struct adc_jack_cond conditions ending
adc_con_d_ition
should maybe be adc_conditions
> + * with .state = 0 entry. This describes how to decode
> + * adc values into extcon state.
> + * @irq_flags - irq flags used for the @irq
> + * @handling_delay_ms - in some devices, we need to read ADC value some
> + * milli-seconds after the interrupt occurs. You may
> + * describe such delays with @handling_delay_ms, which
> + * is rounded-off by jiffies.
> + */
> +struct adc_jack_pdata {
> + const char *name;
> + const char *consumer_channel;
> + /*
> + * NULL if standard extcon names are used.
> + * The last entry should be NULL
> + */
> + const char **cable_names;
> + /* The last entry's state should be 0 */
> + struct adc_jack_cond *adc_condition;
> +
> + unsigned long irq_flags;
> + unsigned long handling_delay_ms; /* in ms */
> +};
> +
> +#endif /* _EXTCON_ADC_JACK_H */
>
--
Peter Meerwald
+43-664-2444418 (mobile)