On Fre, 2012-10-26 at 19:15 +0000, Frederik Himpe wrote:
> When I restart my display manager (GDM) from tty0, I get a corrupted
> image where parts of the X display before I restarted GDM become visible
> on both the newly started X server instance as on tty0. When moving the
> mouse in X, the current (correct) image around the cursor is replaced by
> the image which was shown before X was started.
>
> 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
> nee ATI PITCAIRN PRO [Radeon HD 7800 Series] [1002:6819] (prog-if 00 [VGA
> controller])
> Subsystem: PC Partner Limited Device [174b:e218]
> Flags: bus master, fast devsel, latency 0, IRQ 48
> Memory at e0000000 (64-bit, prefetchable) [size=256M]
> Memory at f7d00000 (64-bit, non-prefetchable) [size=256K]
> I/O ports at e000 [size=256]
> Expansion ROM at f7d40000 [disabled] [size=128K]
> Capabilities: [48] Vendor Specific Information: Len=08 <?>
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Legacy Endpoint, MSI 00
> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> Capabilities: [150] Advanced Error Reporting
> Capabilities: [270] #19
> Capabilities: [2b0] Address Translation Service (ATS)
> Capabilities: [2c0] #13
> Capabilities: [2d0] #1b
> Kernel driver in use: radeon
>
> dmesg, .config, lspci and a picture showing a tty0 with parts of the
> image corrupted by the image of the GDM screen before it was restarted,
> can be found at http://artipc10.vub.ac.be/~frederik/linux-3.7-rc2/
Please also provide the Xorg.0.log file from after you restarted gdm.
--
Earthling Michel D?nzer | http://www.amd.com
Libre software enthusiast | Debian, X and DRI developer
On Mon, 2012-10-29 at 11:40 +0100, Michel Dänzer wrote:
> On Fre, 2012-10-26 at 19:15 +0000, Frederik Himpe wrote:
> > When I restart my display manager (GDM) from tty0, I get a corrupted
> > image where parts of the X display before I restarted GDM become visible
> > on both the newly started X server instance as on tty0. When moving the
> > mouse in X, the current (correct) image around the cursor is replaced by
> > the image which was shown before X was started.
> >
> > 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD]
> > nee ATI PITCAIRN PRO [Radeon HD 7800 Series] [1002:6819] (prog-if 00 [VGA
> >
> > dmesg, .config, lspci and a picture showing a tty0 with parts of the
> > image corrupted by the image of the GDM screen before it was restarted,
> > can be found at http://artipc10.vub.ac.be/~frederik/linux-3.7-rc2/
>
> Please also provide the Xorg.0.log file from after you restarted gdm.
I have uploaded Xorg.0.log to
https://artipc10.vub.ac.be/~frederik/linux-3.7-rc2/Xorg.0.log
--
Frederik Himpe <[email protected]>