The delay field is removed from struct ab8500_regulator_info in commit 29234928
"regulator: ab8500: Remove set_voltage_time_sel and delay setting".
In additional, current delay setting does not make sense at all.
ab8500_regulator_mode_ops is for fixed voltage only, which does not need
set_voltage_time_sel. All ab8540_aux3_regulator_volt_mode_ops users do not have
delay settings so set_voltage_time_sel actually returns 0.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab8500.c | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index ef12d3d..abdfbd4 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -633,15 +633,6 @@ static int ab8540_aux3_regulator_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
-static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
- unsigned int old_sel,
- unsigned int new_sel)
-{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- return info->delay;
-}
-
static struct regulator_ops ab8500_regulator_volt_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
@@ -664,7 +655,6 @@ static struct regulator_ops ab8540_aux3_regulator_volt_mode_ops = {
.get_voltage_sel = ab8540_aux3_regulator_get_voltage_sel,
.set_voltage_sel = ab8540_aux3_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
- .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static struct regulator_ops ab8500_regulator_volt_ops = {
@@ -674,7 +664,6 @@ static struct regulator_ops ab8500_regulator_volt_ops = {
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
- .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static struct regulator_ops ab8500_regulator_mode_ops = {
@@ -1092,7 +1081,6 @@ static struct ab8500_regulator_info
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1357,7 +1345,6 @@ static struct ab8500_regulator_info
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1606,7 +1593,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
--
1.7.10.4
Both voltages and voltages_len are not exist in struct ab8500_regulator_info.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab8500.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index abdfbd4..bdd17e6 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -1124,8 +1124,6 @@ static struct ab8500_regulator_info
.voltage_reg = 0x57,
.voltage_mask = 0x7,
.voltage_shift = 4,
- .voltages = ldo_vaudio_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vaudio_voltages),
},
[AB8505_LDO_ANAMIC1] = {
.desc = {
@@ -1207,8 +1205,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x29,
.voltage_mask = 0x7,
- .voltages = ldo_vana_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vana_voltages),
},
};
@@ -1666,6 +1662,7 @@ static struct ab8500_regulator_info
.id = AB8540_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vdmic_voltages),
+ .volt_table = ldo_vdmic_voltages,
},
.load_lp_uA = 1000,
.update_bank = 0x03,
@@ -1675,8 +1672,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x03,
.voltage_reg = 0x83,
.voltage_mask = 0xc0,
- .voltages = ldo_vdmic_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vdmic_voltages),
},
/*
--
1.7.10.4
Fix below build errors:
CC drivers/regulator/ab8500.o
drivers/regulator/ab8500.c: In function 'ab8500_regulator_probe':
drivers/regulator/ab8500.c:3018:3: error: 'match_size' undeclared (first use in this function)
drivers/regulator/ab8500.c:3018:3: note: each undeclared identifier is reported only once for each function it appears in
drivers/regulator/ab8500.c:3019:2: error: expected ';' before '}' token
drivers/regulator/ab8500.c:3036:2: error: expected ';' before '}' token
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab8500.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index bdd17e6..73d84d8 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -3007,7 +3007,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
struct ab8500_regulator_info *regulator_info;
int regulator_info_size;
struct ab8500_reg_init *reg_init;
- int reg_init_size;
+ int reg_init_size, match_size;
if (is_ab9540(ab8500)) {
regulator_info = ab9540_regulator_info;
@@ -3015,7 +3015,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
reg_init = ab9540_reg_init;
reg_init_size = AB9540_NUM_REGULATOR_REGISTERS;
match = ab9540_regulator_match;
- match_size = ARRAY_SIZE(ab9540_regulator_match)
+ match_size = ARRAY_SIZE(ab9540_regulator_match);
} else if (is_ab8505(ab8500)) {
regulator_info = ab8505_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
@@ -3032,7 +3032,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
reg_init = ab8500_reg_init;
reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
match = ab8500_regulator_match;
- match_size = ARRAY_SIZE(ab8500_regulator_match)
+ match_size = ARRAY_SIZE(ab8500_regulator_match);
}
if (np) {
--
1.7.10.4
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab8500.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 73d84d8..d3170ae 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -3021,11 +3021,15 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
reg_init = ab8505_reg_init;
reg_init_size = AB8505_NUM_REGULATOR_REGISTERS;
+ match = ab8505_regulator_match;
+ match_size = ARRAY_SIZE(ab8505_regulator_match);
} else if (is_ab8540(ab8500)) {
regulator_info = ab8540_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8540_regulator_info);
reg_init = ab8540_reg_init;
reg_init_size = AB8540_NUM_REGULATOR_REGISTERS;
+ match = ab8540_regulator_match;
+ match_size = ARRAY_SIZE(ab8540_regulator_match);
} else {
regulator_info = ab8500_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
--
1.7.10.4
On Wed, 03 Apr 2013, Axel Lin wrote:
> Fix below build errors:
> CC drivers/regulator/ab8500.o
> drivers/regulator/ab8500.c: In function 'ab8500_regulator_probe':
> drivers/regulator/ab8500.c:3018:3: error: 'match_size' undeclared (first use in this function)
> drivers/regulator/ab8500.c:3018:3: note: each undeclared identifier is reported only once for each function it appears in
> drivers/regulator/ab8500.c:3019:2: error: expected ';' before '}' token
> drivers/regulator/ab8500.c:3036:2: error: expected ';' before '}' token
>
> Signed-off-by: Axel Lin <[email protected]>
> ---
> drivers/regulator/ab8500.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
> index bdd17e6..73d84d8 100644
> --- a/drivers/regulator/ab8500.c
> +++ b/drivers/regulator/ab8500.c
> @@ -3007,7 +3007,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
> struct ab8500_regulator_info *regulator_info;
> int regulator_info_size;
> struct ab8500_reg_init *reg_init;
> - int reg_init_size;
> + int reg_init_size, match_size;
>
> if (is_ab9540(ab8500)) {
> regulator_info = ab9540_regulator_info;
> @@ -3015,7 +3015,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
> reg_init = ab9540_reg_init;
> reg_init_size = AB9540_NUM_REGULATOR_REGISTERS;
> match = ab9540_regulator_match;
> - match_size = ARRAY_SIZE(ab9540_regulator_match)
> + match_size = ARRAY_SIZE(ab9540_regulator_match);
> } else if (is_ab8505(ab8500)) {
> regulator_info = ab8505_regulator_info;
> regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
> @@ -3032,7 +3032,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
> reg_init = ab8500_reg_init;
> reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
> match = ab8500_regulator_match;
> - match_size = ARRAY_SIZE(ab8500_regulator_match)
> + match_size = ARRAY_SIZE(ab8500_regulator_match);
> }
>
> if (np) {
We already satisfy this requirement in:
"regulator: ab8500: Use a struct to select the good regulator
configuration"
... which is queued.
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Wed, 03 Apr 2013, Axel Lin wrote:
> Signed-off-by: Axel Lin <[email protected]>
> ---
> drivers/regulator/ab8500.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
> index 73d84d8..d3170ae 100644
> --- a/drivers/regulator/ab8500.c
> +++ b/drivers/regulator/ab8500.c
> @@ -3021,11 +3021,15 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
> regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
> reg_init = ab8505_reg_init;
> reg_init_size = AB8505_NUM_REGULATOR_REGISTERS;
> + match = ab8505_regulator_match;
> + match_size = ARRAY_SIZE(ab8505_regulator_match);
> } else if (is_ab8540(ab8500)) {
> regulator_info = ab8540_regulator_info;
> regulator_info_size = ARRAY_SIZE(ab8540_regulator_info);
> reg_init = ab8540_reg_init;
> reg_init_size = AB8540_NUM_REGULATOR_REGISTERS;
> + match = ab8540_regulator_match;
> + match_size = ARRAY_SIZE(ab8540_regulator_match);
> } else {
> regulator_info = ab8500_regulator_info;
> regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
Hmm... looks like a merge error, sorry for that.
Again is solved by the next patch in Mark's list:
"regulator: ab8500: Use a struct to select the good regulator
configuration"
Ironically Mark this is No11.
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Wed, Apr 03, 2013 at 10:30:43AM +0800, Axel Lin wrote:
> The delay field is removed from struct ab8500_regulator_info in commit 29234928
> "regulator: ab8500: Remove set_voltage_time_sel and delay setting".
I've now finished applying all Lee's outstanding patches (which weren't
sent to the list...) - could you please recheck if the first two of
these patches are still revlevant and that the last two are addressed
properly as per Lee's mails? Thanks.
2013/4/4 Mark Brown <[email protected]>:
> On Wed, Apr 03, 2013 at 10:30:43AM +0800, Axel Lin wrote:
>> The delay field is removed from struct ab8500_regulator_info in commit 29234928
>> "regulator: ab8500: Remove set_voltage_time_sel and delay setting".
>
> I've now finished applying all Lee's outstanding patches (which weren't
> sent to the list...) - could you please recheck if the first two of
> these patches are still revlevant and that the last two are addressed
> properly as per Lee's mails? Thanks.
Yes, it looks ok now except ab8500_regulator_set_voltage_time_sel() is not
useful because it always return 0.