All regulators have ascendant voltage list in this driver.
Some regulators have more than 200 supported voltages.
e.g.
For TPS65910_REG_VDD1 and TPS65910_REG_VDD2:
n_voltages = VDD1_2_NUM_VOLT_FINE * VDD1_2_NUM_VOLT_COARSE
= 73 * 3
= 219
Thus it worth converting to regulator_map_voltage_ascend rather than use
default regulator_map_voltage_iterate.
For consistent, convert all regulators to regulator_map_voltage_ascend.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/tps65910-regulator.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 6ba6931..45c1644 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -748,6 +748,7 @@ static struct regulator_ops tps65910_ops_dcdc = {
.set_voltage_sel = tps65910_set_voltage_dcdc_sel,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.list_voltage = tps65910_list_voltage_dcdc,
+ .map_voltage = regulator_map_voltage_ascend,
};
static struct regulator_ops tps65910_ops_vdd3 = {
@@ -758,6 +759,7 @@ static struct regulator_ops tps65910_ops_vdd3 = {
.get_mode = tps65910_get_mode,
.get_voltage = tps65910_get_voltage_vdd3,
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
};
static struct regulator_ops tps65910_ops = {
@@ -769,6 +771,7 @@ static struct regulator_ops tps65910_ops = {
.get_voltage_sel = tps65910_get_voltage_sel,
.set_voltage_sel = tps65910_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
};
static struct regulator_ops tps65911_ops = {
@@ -780,6 +783,7 @@ static struct regulator_ops tps65911_ops = {
.get_voltage_sel = tps65911_get_voltage_sel,
.set_voltage_sel = tps65911_set_voltage_sel,
.list_voltage = tps65911_list_voltage,
+ .map_voltage = regulator_map_voltage_ascend,
};
static int tps65910_set_ext_sleep_config(struct tps65910_reg *pmic,
--
1.7.10.4
On Sat, Apr 20, 2013 at 10:30:17AM +0800, Axel Lin wrote:
> All regulators have ascendant voltage list in this driver.
> Some regulators have more than 200 supported voltages.
> e.g.
Applied, thanks.