This switches the Nomadik platform to also registering its
clocksource from the device tree, removing unused support
code as we go along.
Signed-off-by: Linus Walleij <[email protected]>
---
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 11 ++++++++---
arch/arm/mach-nomadik/Kconfig | 1 +
arch/arm/mach-nomadik/cpu-8815.c | 6 +++---
drivers/clk/clk-nomadik.c | 15 ---------------
4 files changed, 12 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index f0df948..51a33e0 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -21,18 +21,23 @@
cache-level = <2>;
};
- mtu0 {
+ mtu0: mtu@101e2000 {
/* Nomadik system timer */
+ compatible = "st,nomadik-mtu";
reg = <0x101e2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <4>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timclk", "apb_pclk";
};
- mtu1 {
+ mtu1: mtu@101e3000 {
/* Secondary timer */
reg = <0x101e3000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <5>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timclk", "apb_pclk";
};
gpio0: gpio@101e4000 {
@@ -101,7 +106,7 @@
pclk: pclk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <2400000>;
+ clock-frequency = <0>;
};
/*
* The 2.4 MHz TIMCLK reference clock is active at
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 8c1ccd4..4eafec3 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,6 +6,7 @@ config ARCH_NOMADIK
select ARM_VIC
select CLKSRC_NOMADIK_MTU
select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
+ select CLKSRC_OF
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 0e2c5e0..e73a71f7 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -29,7 +29,7 @@
#include <linux/platform_data/clk-nomadik.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/clocksource.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/of_address.h>
@@ -172,7 +172,7 @@ static void __init cpu8815_timer_init_of(void)
/* We need this to be up now */
nomadik_clk_init();
- mtu = of_find_node_by_path("/mtu0");
+ mtu = of_find_node_by_path("/mtu@101e2000");
if (!mtu)
return;
base = of_iomap(mtu, 0);
@@ -188,7 +188,7 @@ static void __init cpu8815_timer_init_of(void)
src_cr |= SRC_CR_INIT_VAL;
writel(src_cr, base);
- nmdk_timer_init(base, irq);
+ clocksource_of_init();
}
static struct fsmc_nand_timings cpu8815_nand_timings = {
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 19f197c..4a1ab27 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -17,20 +17,5 @@ static const __initconst struct of_device_id cpu8815_clk_match[] = {
void __init nomadik_clk_init(void)
{
- struct clk *clk;
-
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
- clk_register_clkdev(clk, "apb_pclk", NULL);
-
- /*
- * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
- * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used
- * by the timers and watchdog. See page 105 ff.
- */
- clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT,
- 2400000);
- clk_register_clkdev(clk, NULL, "mtu0");
- clk_register_clkdev(clk, NULL, "mtu1");
-
of_clk_init(cpu8815_clk_match);
}
--
1.8.1.4