2013-04-24 12:44:53

by Axel Lin

[permalink] [raw]
Subject: [PATCH 1/2] regulator: lp872x: Use regulator_map_voltage_ascend

All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/lp872x.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 8e3c7ae..f5fc4a1 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -478,6 +478,7 @@ static unsigned int lp872x_buck_get_mode(struct regulator_dev *rdev)

static struct regulator_ops lp872x_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
@@ -488,6 +489,7 @@ static struct regulator_ops lp872x_ldo_ops = {

static struct regulator_ops lp8720_buck_ops = {
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = lp872x_buck_set_voltage_sel,
.get_voltage_sel = lp872x_buck_get_voltage_sel,
.enable = regulator_enable_regmap,
@@ -500,6 +502,7 @@ static struct regulator_ops lp8720_buck_ops = {

static struct regulator_ops lp8725_buck_ops = {
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = lp872x_buck_set_voltage_sel,
.get_voltage_sel = lp872x_buck_get_voltage_sel,
.enable = regulator_enable_regmap,
--
1.7.10.4



2013-04-24 12:45:42

by Axel Lin

[permalink] [raw]
Subject: [PATCH 2/2] regulator: lp8788-buck: Use regulator_map_voltage_ascend

All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.

Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/lp8788-buck.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index 97891a7..eb1e1e8 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -346,6 +346,7 @@ static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)

static struct regulator_ops lp8788_buck12_ops = {
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = lp8788_buck12_set_voltage_sel,
.get_voltage_sel = lp8788_buck12_get_voltage_sel,
.enable = regulator_enable_regmap,
@@ -358,6 +359,7 @@ static struct regulator_ops lp8788_buck12_ops = {

static struct regulator_ops lp8788_buck34_ops = {
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
--
1.7.10.4


2013-04-25 10:51:15

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH 1/2] regulator: lp872x: Use regulator_map_voltage_ascend

On Wed, Apr 24, 2013 at 08:44:47PM +0800, Axel Lin wrote:
> All regulators have ascendant voltage list in this driver.
> Use regulator_map_voltage_ascend for them.

Applied both, thanks.

Attachments:
(No filename) (187.00 B)
 signature.asc (836.00 B)
Digital signature Download all attachments