tps65020 ldo1 and ldo2 vsel tables are identical, merge them.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/tps65023-regulator.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 21a890a..42fea2c 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -107,12 +107,7 @@ static const unsigned int DCDC_FIXED_1800000_VSEL_table[] = {
};
/* Supported voltage values for LDO regulators for tps65020 */
-static const unsigned int TPS65020_LDO1_VSEL_table[] = {
- 1000000, 1050000, 1100000, 1300000,
- 1800000, 2500000, 3000000, 3300000,
-};
-
-static const unsigned int TPS65020_LDO2_VSEL_table[] = {
+static const unsigned int TPS65020_LDO_VSEL_table[] = {
1000000, 1050000, 1100000, 1300000,
1800000, 2500000, 3000000, 3300000,
};
@@ -334,13 +329,13 @@ static const struct tps_info tps65020_regs[] = {
},
{
.name = "LDO1",
- .table_len = ARRAY_SIZE(TPS65020_LDO1_VSEL_table),
- .table = TPS65020_LDO1_VSEL_table,
+ .table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table),
+ .table = TPS65020_LDO_VSEL_table,
},
{
.name = "LDO2",
- .table_len = ARRAY_SIZE(TPS65020_LDO2_VSEL_table),
- .table = TPS65020_LDO2_VSEL_table,
+ .table_len = ARRAY_SIZE(TPS65020_LDO_VSEL_table),
+ .table = TPS65020_LDO_VSEL_table,
},
};
--
1.7.10.4
All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/tps65023-regulator.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 42fea2c..9d053e2 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -180,6 +180,7 @@ static struct regulator_ops tps65023_dcdc_ops = {
.get_voltage_sel = tps65023_dcdc_get_voltage_sel,
.set_voltage_sel = tps65023_dcdc_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
};
/* Operations permitted on LDOx */
@@ -190,6 +191,7 @@ static struct regulator_ops tps65023_ldo_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
};
static struct regmap_config tps65023_regmap_config = {
--
1.7.10.4
All regulators have ascendant voltage list in this driver.
Use regulator_map_voltage_ascend for them.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/tps6507x-regulator.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 54aa2da..4117ff5 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -356,6 +356,7 @@ static struct regulator_ops tps6507x_pmic_ops = {
.get_voltage_sel = tps6507x_pmic_get_voltage_sel,
.set_voltage_sel = tps6507x_pmic_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
};
#ifdef CONFIG_OF
--
1.7.10.4
On Thu, Apr 25, 2013 at 11:33:42AM +0800, Axel Lin wrote:
> All regulators have ascendant voltage list in this driver.
> Use regulator_map_voltage_ascend for them.
Applied, thanks.