From: Sonic Zhang <[email protected]>
The new ADI GPIO2 controller was introduced since the BF548 and BF60x
processors. It differs a lot from the old one on BF5xx processors. So,
create a pinctrl driver under the pinctrl framework.
- Define gpio ports and pin interrupt controllers as individual platform
devices.
- Register a pinctrl driver for the whole GPIO ports and pin interrupt
devices.
- Probe pint devices before port devices. Put device instances into
the global gpio and pint lists.
- Define peripheral, irq and gpio reservation bit masks for each gpio
port as runtime resources.
- Save and restore gpio port and pint status MMRs in syscore PM functions.
- Create the plug-in subdrivers to hold the pinctrl soc data for bf54x
and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data
in pin controller probe function. Get the pin groups and functions via
the soc data reference.
- Call gpiochip_add_pin_range() in gpio device probe function to register
range cross reference between gpio device and pin control device.
- Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object
by container_of() and find adi_pinctrl by pin control device name.
- Handle peripheral and gpio requests in pinctrl operation functions.
- Demux gpio IRQs via the irq_domain created by each GPIO port.
Signed-off-by: Sonic Zhang <[email protected]>
---
v2-changes:
- Remove unlinke() directive.
v3-changes:
- Rename struct adi_pmx to adi_pinctrl.
- Fix the comments of struct gpio_pint.
- Remove unused pin_base in struct gpio_port.
- Change pint_assign into bool type.
- Add comments about the relationship between pint device and port device
to the driver header.
- Use BIT macro to shift bit.
- Remove all bitmap reservation help functions. Inline reservation functions
into the actual code.
- Remove gpio and offset mutual reference help functions.
- Remove all help functions to find gpio_port and adi_pinctrl structs. Get
range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by
container_of() and find adi_pinctrl by pin control device name.
- Pass bool type usage variable to port_setup help function.
- Separate long bit operations into several lines and add comments.
- Use debugfs to output all GPIO request information.
- Avoid to set drvdata to NULL
- Add explanation to function adi_gpio_init_int()
- Call gpiochip_add_pin_range() in gpio device probe function to register
range cross reference between gpio device and pin control device.
- Remove the reference to pin control device from the gpio_port struct.
Remove the reference list to gpio device from the adi_pinctrl struct.
Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through
the gpio list to do power suspend and resume operations.
- Remove the global GPIO base from struct adi_pinctrl, define pin base in
the platform data for each GPIO port device.
- Initialize adi_pinctrl_setup in arch_initcall().
- print the status of triggers, whether it is in GPIO mode, if it is
flagged to be used as IRQ, etc in adi_pin_dbg_show().
- Create the plug-in subdrivers to hold the pinctrl soc data for bf54x
and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data
in pin controller probe function. Get the pin groups and functions via
the soc data reference.
v4-changes:
- remove useless system_state checking.
- replace dev_err with dev_warn in both irq and gpio pin cases.
- comment on relationship between irq type and invert operation.
- It is not necessary to check the reservation mode of the requested
pin in IRQ chip operation. Remove the reservation map.
- Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2
driver specific debugfs output.
- Add linkport group and function information for bf60x.
- Separate uart and ctsrts pins into 2 groups.
- Separate APAPI and alternative ATAPI pins into 2 groups.
Signed-off-by: Sonic Zhang <[email protected]>
---
drivers/pinctrl/Kconfig | 17 +
drivers/pinctrl/Makefile | 3 +
drivers/pinctrl/pinctrl-adi2-bf54x.c | 592 ++++++++++++++
drivers/pinctrl/pinctrl-adi2-bf60x.c | 522 ++++++++++++
drivers/pinctrl/pinctrl-adi2.c | 1183 ++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-adi2.h | 75 ++
include/linux/platform_data/pinctrl-adi2.h | 40 +
7 files changed, 2432 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-adi2-bf54x.c
create mode 100644 drivers/pinctrl/pinctrl-adi2-bf60x.c
create mode 100644 drivers/pinctrl/pinctrl-adi2.c
create mode 100644 drivers/pinctrl/pinctrl-adi2.h
create mode 100644 include/linux/platform_data/pinctrl-adi2.h
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8f66924..08b8337 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -49,6 +49,23 @@ config PINCTRL_AB8505
bool "AB8505 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
+config PINCTRL_ADI2
+ bool "ADI pin controller driver"
+ select PINMUX
+ select IRQ_DOMAIN
+ help
+ This is the pin controller and gpio driver for ADI BF54x, BF60x and
+ future processors. This option is selected automatically when specific
+ machine and arch are selected to build.
+
+config PINCTRL_BF54x
+ def_bool y if BF54x
+ select PINCTRL_ADI2
+
+config PINCTRL_BF60x
+ def_bool y if BF60x
+ select PINCTRL_ADI2
+
config PINCTRL_AT91
bool "AT91 pinctrl driver"
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 9bdaeb8..4701180 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -14,6 +14,9 @@ obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
obj-$(CONFIG_PINCTRL_AB8540) += pinctrl-ab8540.o
obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o
obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
+obj-$(CONFIG_PINCTRL_ADI2) += pinctrl-adi2.o
+obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o
+obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
diff --git a/drivers/pinctrl/pinctrl-adi2-bf54x.c b/drivers/pinctrl/pinctrl-adi2-bf54x.c
new file mode 100644
index 0000000..ea9d9ab
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-adi2-bf54x.c
@@ -0,0 +1,592 @@
+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+#include <asm/portmux.h>
+#include "pinctrl-adi2.h"
+
+static const struct pinctrl_pin_desc adi_pads[] = {
+ PINCTRL_PIN(0, "PA0"),
+ PINCTRL_PIN(1, "PA1"),
+ PINCTRL_PIN(2, "PA2"),
+ PINCTRL_PIN(3, "PG3"),
+ PINCTRL_PIN(4, "PA4"),
+ PINCTRL_PIN(5, "PA5"),
+ PINCTRL_PIN(6, "PA6"),
+ PINCTRL_PIN(7, "PA7"),
+ PINCTRL_PIN(8, "PA8"),
+ PINCTRL_PIN(9, "PA9"),
+ PINCTRL_PIN(10, "PA10"),
+ PINCTRL_PIN(11, "PA11"),
+ PINCTRL_PIN(12, "PA12"),
+ PINCTRL_PIN(13, "PA13"),
+ PINCTRL_PIN(14, "PA14"),
+ PINCTRL_PIN(15, "PA15"),
+ PINCTRL_PIN(16, "PB0"),
+ PINCTRL_PIN(17, "PB1"),
+ PINCTRL_PIN(18, "PB2"),
+ PINCTRL_PIN(19, "PB3"),
+ PINCTRL_PIN(20, "PB4"),
+ PINCTRL_PIN(21, "PB5"),
+ PINCTRL_PIN(22, "PB6"),
+ PINCTRL_PIN(23, "PB7"),
+ PINCTRL_PIN(24, "PB8"),
+ PINCTRL_PIN(25, "PB9"),
+ PINCTRL_PIN(26, "PB10"),
+ PINCTRL_PIN(27, "PB11"),
+ PINCTRL_PIN(28, "PB12"),
+ PINCTRL_PIN(29, "PB13"),
+ PINCTRL_PIN(30, "PB14"),
+ PINCTRL_PIN(32, "PC0"),
+ PINCTRL_PIN(33, "PC1"),
+ PINCTRL_PIN(34, "PC2"),
+ PINCTRL_PIN(35, "PC3"),
+ PINCTRL_PIN(36, "PC4"),
+ PINCTRL_PIN(37, "PC5"),
+ PINCTRL_PIN(38, "PC6"),
+ PINCTRL_PIN(39, "PC7"),
+ PINCTRL_PIN(40, "PC8"),
+ PINCTRL_PIN(41, "PC9"),
+ PINCTRL_PIN(42, "PC10"),
+ PINCTRL_PIN(43, "PC11"),
+ PINCTRL_PIN(44, "PC12"),
+ PINCTRL_PIN(45, "PC13"),
+ PINCTRL_PIN(48, "PD0"),
+ PINCTRL_PIN(49, "PD1"),
+ PINCTRL_PIN(50, "PD2"),
+ PINCTRL_PIN(51, "PD3"),
+ PINCTRL_PIN(52, "PD4"),
+ PINCTRL_PIN(53, "PD5"),
+ PINCTRL_PIN(54, "PD6"),
+ PINCTRL_PIN(55, "PD7"),
+ PINCTRL_PIN(56, "PD8"),
+ PINCTRL_PIN(57, "PD9"),
+ PINCTRL_PIN(58, "PD10"),
+ PINCTRL_PIN(59, "PD11"),
+ PINCTRL_PIN(60, "PD12"),
+ PINCTRL_PIN(61, "PD13"),
+ PINCTRL_PIN(62, "PD14"),
+ PINCTRL_PIN(63, "PD15"),
+ PINCTRL_PIN(64, "PE0"),
+ PINCTRL_PIN(65, "PE1"),
+ PINCTRL_PIN(66, "PE2"),
+ PINCTRL_PIN(67, "PE3"),
+ PINCTRL_PIN(68, "PE4"),
+ PINCTRL_PIN(69, "PE5"),
+ PINCTRL_PIN(70, "PE6"),
+ PINCTRL_PIN(71, "PE7"),
+ PINCTRL_PIN(72, "PE8"),
+ PINCTRL_PIN(73, "PE9"),
+ PINCTRL_PIN(74, "PE10"),
+ PINCTRL_PIN(75, "PE11"),
+ PINCTRL_PIN(76, "PE12"),
+ PINCTRL_PIN(77, "PE13"),
+ PINCTRL_PIN(78, "PE14"),
+ PINCTRL_PIN(79, "PE15"),
+ PINCTRL_PIN(80, "PF0"),
+ PINCTRL_PIN(81, "PF1"),
+ PINCTRL_PIN(82, "PF2"),
+ PINCTRL_PIN(83, "PF3"),
+ PINCTRL_PIN(84, "PF4"),
+ PINCTRL_PIN(85, "PF5"),
+ PINCTRL_PIN(86, "PF6"),
+ PINCTRL_PIN(87, "PF7"),
+ PINCTRL_PIN(88, "PF8"),
+ PINCTRL_PIN(89, "PF9"),
+ PINCTRL_PIN(90, "PF10"),
+ PINCTRL_PIN(91, "PF11"),
+ PINCTRL_PIN(92, "PF12"),
+ PINCTRL_PIN(93, "PF13"),
+ PINCTRL_PIN(94, "PF14"),
+ PINCTRL_PIN(95, "PF15"),
+ PINCTRL_PIN(96, "PG0"),
+ PINCTRL_PIN(97, "PG1"),
+ PINCTRL_PIN(98, "PG2"),
+ PINCTRL_PIN(99, "PG3"),
+ PINCTRL_PIN(100, "PG4"),
+ PINCTRL_PIN(101, "PG5"),
+ PINCTRL_PIN(102, "PG6"),
+ PINCTRL_PIN(103, "PG7"),
+ PINCTRL_PIN(104, "PG8"),
+ PINCTRL_PIN(105, "PG9"),
+ PINCTRL_PIN(106, "PG10"),
+ PINCTRL_PIN(107, "PG11"),
+ PINCTRL_PIN(108, "PG12"),
+ PINCTRL_PIN(109, "PG13"),
+ PINCTRL_PIN(110, "PG14"),
+ PINCTRL_PIN(111, "PG15"),
+ PINCTRL_PIN(112, "PH0"),
+ PINCTRL_PIN(113, "PH1"),
+ PINCTRL_PIN(114, "PH2"),
+ PINCTRL_PIN(115, "PH3"),
+ PINCTRL_PIN(116, "PH4"),
+ PINCTRL_PIN(117, "PH5"),
+ PINCTRL_PIN(118, "PH6"),
+ PINCTRL_PIN(119, "PH7"),
+ PINCTRL_PIN(120, "PH8"),
+ PINCTRL_PIN(121, "PH9"),
+ PINCTRL_PIN(122, "PH10"),
+ PINCTRL_PIN(123, "PH11"),
+ PINCTRL_PIN(124, "PH12"),
+ PINCTRL_PIN(125, "PH13"),
+ PINCTRL_PIN(128, "PI0"),
+ PINCTRL_PIN(129, "PI1"),
+ PINCTRL_PIN(130, "PI2"),
+ PINCTRL_PIN(131, "PI3"),
+ PINCTRL_PIN(132, "PI4"),
+ PINCTRL_PIN(133, "PI5"),
+ PINCTRL_PIN(134, "PI6"),
+ PINCTRL_PIN(135, "PI7"),
+ PINCTRL_PIN(136, "PI8"),
+ PINCTRL_PIN(137, "PI9"),
+ PINCTRL_PIN(138, "PI10"),
+ PINCTRL_PIN(139, "PI11"),
+ PINCTRL_PIN(140, "PI12"),
+ PINCTRL_PIN(141, "PI13"),
+ PINCTRL_PIN(142, "PI14"),
+ PINCTRL_PIN(143, "PI15"),
+ PINCTRL_PIN(144, "PJ0"),
+ PINCTRL_PIN(145, "PJ1"),
+ PINCTRL_PIN(146, "PJ2"),
+ PINCTRL_PIN(147, "PJ3"),
+ PINCTRL_PIN(148, "PJ4"),
+ PINCTRL_PIN(149, "PJ5"),
+ PINCTRL_PIN(150, "PJ6"),
+ PINCTRL_PIN(151, "PJ7"),
+ PINCTRL_PIN(152, "PJ8"),
+ PINCTRL_PIN(153, "PJ9"),
+ PINCTRL_PIN(154, "PJ10"),
+ PINCTRL_PIN(155, "PJ11"),
+ PINCTRL_PIN(156, "PJ12"),
+ PINCTRL_PIN(157, "PJ13"),
+};
+
+static const unsigned uart0_pins[] = {
+ GPIO_PE7, GPIO_PE8,
+};
+
+static const unsigned uart1_pins[] = {
+ GPIO_PH0, GPIO_PH1,
+};
+
+static const unsigned uart1_ctsrts_pins[] = {
+ GPIO_PE9, GPIO_PE10,
+};
+
+static const unsigned uart2_pins[] = {
+ GPIO_PB4, GPIO_PB5,
+};
+
+static const unsigned uart3_pins[] = {
+ GPIO_PB6, GPIO_PB7,
+};
+
+static const unsigned uart3_ctsrts_pins[] = {
+ GPIO_PB2, GPIO_PB3,
+};
+
+static const unsigned rsi0_pins[] = {
+ GPIO_PC8, GPIO_PC9, GPIO_PC10, GPIO_PC11, GPIO_PC12, GPIO_PC13,
+};
+
+static const unsigned spi0_pins[] = {
+ GPIO_PE0, GPIO_PE1, GPIO_PE2,
+};
+
+static const unsigned spi1_pins[] = {
+ GPIO_PG8, GPIO_PG9, GPIO_PG10,
+};
+
+static const unsigned twi0_pins[] = {
+ GPIO_PE14, GPIO_PE15,
+};
+
+static const unsigned twi1_pins[] = {
+ GPIO_PB0, GPIO_PB1,
+};
+
+static const unsigned rotary_pins[] = {
+ GPIO_PH4, GPIO_PH3, GPIO_PH5,
+};
+
+static const unsigned can0_pins[] = {
+ GPIO_PG13, GPIO_PG12,
+};
+
+static const unsigned can1_pins[] = {
+ GPIO_PG14, GPIO_PG15,
+};
+
+static const unsigned smc0_pins[] = {
+ GPIO_PH8, GPIO_PH9, GPIO_PH10, GPIO_PH11, GPIO_PH12, GPIO_PH13,
+ GPIO_PI0, GPIO_PI1, GPIO_PI2, GPIO_PI3, GPIO_PI4, GPIO_PI5, GPIO_PI6,
+ GPIO_PI7, GPIO_PI8, GPIO_PI9, GPIO_PI10, GPIO_PI11,
+ GPIO_PI12, GPIO_PI13, GPIO_PI14, GPIO_PI15,
+};
+
+static const unsigned sport0_pins[] = {
+ GPIO_PC0, GPIO_PC2, GPIO_PC3, GPIO_PC4, GPIO_PC6, GPIO_PC7,
+};
+
+static const unsigned sport1_pins[] = {
+ GPIO_PD0, GPIO_PD2, GPIO_PD3, GPIO_PD4, GPIO_PD6, GPIO_PD7,
+};
+
+static const unsigned sport2_pins[] = {
+ GPIO_PA0, GPIO_PA2, GPIO_PA3, GPIO_PA4, GPIO_PA6, GPIO_PA7,
+};
+
+static const unsigned sport3_pins[] = {
+ GPIO_PA8, GPIO_PA10, GPIO_PA11, GPIO_PA12, GPIO_PA14, GPIO_PA15,
+};
+
+static const unsigned ppi0_8b_pins[] = {
+ GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
+ GPIO_PF7, GPIO_PF13, GPIO_PG0, GPIO_PG1, GPIO_PG2,
+};
+
+static const unsigned ppi0_16b_pins[] = {
+ GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
+ GPIO_PF7, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
+ GPIO_PF13, GPIO_PF14, GPIO_PF15,
+ GPIO_PG0, GPIO_PG1, GPIO_PG2,
+};
+
+static const unsigned ppi0_24b_pins[] = {
+ GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
+ GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
+ GPIO_PF13, GPIO_PF14, GPIO_PF15, GPIO_PD0, GPIO_PD1, GPIO_PD2,
+ GPIO_PD3, GPIO_PD4, GPIO_PD5, GPIO_PG3, GPIO_PG4,
+ GPIO_PG0, GPIO_PG1, GPIO_PG2,
+};
+
+static const unsigned ppi1_8b_pins[] = {
+ GPIO_PD0, GPIO_PD1, GPIO_PD2, GPIO_PD3, GPIO_PD4, GPIO_PD5, GPIO_PD6,
+ GPIO_PD7, GPIO_PE11, GPIO_PE12, GPIO_PE13,
+};
+
+static const unsigned ppi1_16b_pins[] = {
+ GPIO_PD0, GPIO_PD1, GPIO_PD2, GPIO_PD3, GPIO_PD4, GPIO_PD5, GPIO_PD6,
+ GPIO_PD7, GPIO_PD8, GPIO_PD9, GPIO_PD10, GPIO_PD11, GPIO_PD12,
+ GPIO_PD13, GPIO_PD14, GPIO_PD15,
+ GPIO_PE11, GPIO_PE12, GPIO_PE13,
+};
+
+static const unsigned ppi2_8b_pins[] = {
+ GPIO_PD8, GPIO_PD9, GPIO_PD10, GPIO_PD11, GPIO_PD12,
+ GPIO_PD13, GPIO_PD14, GPIO_PD15,
+ GPIO_PA7, GPIO_PB0, GPIO_PB1, GPIO_PB2, GPIO_PB3,
+};
+
+static const unsigned atapi_pins[] = {
+ GPIO_PH2, GPIO_PJ3, GPIO_PJ4, GPIO_PJ5, GPIO_PJ6,
+ GPIO_PJ7, GPIO_PJ8, GPIO_PJ9, GPIO_PJ10,
+};
+
+static const unsigned atapi_alter_pins[] = {
+ GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
+ GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
+ GPIO_PF13, GPIO_PF14, GPIO_PF15, GPIO_PG2, GPIO_PG3, GPIO_PG4,
+};
+
+static const unsigned nfc0_pins[] = {
+ GPIO_PJ1, GPIO_PJ2,
+};
+
+static const unsigned keys_4x4_pins[] = {
+ GPIO_PD8, GPIO_PD9, GPIO_PD10, GPIO_PD11,
+ GPIO_PD12, GPIO_PD13, GPIO_PD14, GPIO_PD15,
+};
+
+static const unsigned keys_8x8_pins[] = {
+ GPIO_PD8, GPIO_PD9, GPIO_PD10, GPIO_PD11,
+ GPIO_PD12, GPIO_PD13, GPIO_PD14, GPIO_PD15,
+ GPIO_PE0, GPIO_PE1, GPIO_PE2, GPIO_PE3,
+ GPIO_PE4, GPIO_PE5, GPIO_PE6, GPIO_PE7,
+};
+
+static const struct adi_pin_group adi_pin_groups[] = {
+ ADI_PIN_GROUP("uart0grp", uart0_pins),
+ ADI_PIN_GROUP("uart1grp", uart1_pins),
+ ADI_PIN_GROUP("uart1ctsrtsgrp", uart1_ctsrts_pins),
+ ADI_PIN_GROUP("uart2grp", uart2_pins),
+ ADI_PIN_GROUP("uart3grp", uart3_pins),
+ ADI_PIN_GROUP("uart3ctsrtsgrp", uart3_ctsrts_pins),
+ ADI_PIN_GROUP("rsi0grp", rsi0_pins),
+ ADI_PIN_GROUP("spi0grp", spi0_pins),
+ ADI_PIN_GROUP("spi1grp", spi1_pins),
+ ADI_PIN_GROUP("twi0grp", twi0_pins),
+ ADI_PIN_GROUP("twi1grp", twi1_pins),
+ ADI_PIN_GROUP("rotarygrp", rotary_pins),
+ ADI_PIN_GROUP("can0grp", can0_pins),
+ ADI_PIN_GROUP("can1grp", can1_pins),
+ ADI_PIN_GROUP("smc0grp", smc0_pins),
+ ADI_PIN_GROUP("sport0grp", sport0_pins),
+ ADI_PIN_GROUP("sport1grp", sport1_pins),
+ ADI_PIN_GROUP("sport2grp", sport2_pins),
+ ADI_PIN_GROUP("sport3grp", sport3_pins),
+ ADI_PIN_GROUP("ppi0_8bgrp", ppi0_8b_pins),
+ ADI_PIN_GROUP("ppi0_16bgrp", ppi0_16b_pins),
+ ADI_PIN_GROUP("ppi0_24bgrp", ppi0_24b_pins),
+ ADI_PIN_GROUP("ppi1_8bgrp", ppi1_8b_pins),
+ ADI_PIN_GROUP("ppi1_16bgrp", ppi1_16b_pins),
+ ADI_PIN_GROUP("ppi2_8bgrp", ppi2_8b_pins),
+ ADI_PIN_GROUP("atapigrp", atapi_pins),
+ ADI_PIN_GROUP("atapialtergrp", atapi_alter_pins),
+ ADI_PIN_GROUP("nfc0grp", nfc0_pins),
+ ADI_PIN_GROUP("keys_4x4grp", keys_4x4_pins),
+ ADI_PIN_GROUP("keys_8x8grp", keys_8x8_pins),
+};
+
+static const unsigned short uart0_mux[] = {
+ P_UART0_TX, P_UART0_RX,
+ 0
+};
+
+static const unsigned short uart1_mux[] = {
+ P_UART1_TX, P_UART1_RX,
+ 0
+};
+
+static const unsigned short uart1_ctsrts_mux[] = {
+ P_UART1_RTS, P_UART1_CTS,
+ 0
+};
+
+static const unsigned short uart2_mux[] = {
+ P_UART2_TX, P_UART2_RX,
+ 0
+};
+
+static const unsigned short uart3_mux[] = {
+ P_UART3_TX, P_UART3_RX,
+ 0
+};
+
+static const unsigned short uart3_ctsrts_mux[] = {
+ P_UART3_RTS, P_UART3_CTS,
+ 0
+};
+
+static const unsigned short rsi0_mux[] = {
+ P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD,
+ 0
+};
+
+static const unsigned short spi0_mux[] = {
+ P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0
+};
+
+static const unsigned short spi1_mux[] = {
+ P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0
+};
+
+static const unsigned short twi0_mux[] = {
+ P_TWI0_SCL, P_TWI0_SDA, 0
+};
+
+static const unsigned short twi1_mux[] = {
+ P_TWI1_SCL, P_TWI1_SDA, 0
+};
+
+static const unsigned short rotary_mux[] = {
+ P_CNT_CUD, P_CNT_CDG, P_CNT_CZM, 0
+};
+
+static const unsigned short sport0_mux[] = {
+ P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static const unsigned short sport1_mux[] = {
+ P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+ P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static const unsigned short sport2_mux[] = {
+ P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+ P_SPORT2_DRPRI, P_SPORT2_RSCLK, 0
+};
+
+static const unsigned short sport3_mux[] = {
+ P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+ P_SPORT3_DRPRI, P_SPORT3_RSCLK, 0
+};
+
+static const unsigned short can0_mux[] = {
+ P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static const unsigned short can1_mux[] = {
+ P_CAN1_RX, P_CAN1_TX, 0
+};
+
+static const unsigned short smc0_mux[] = {
+ P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+ P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
+ P_A22, P_A23, P_A24, P_A25, P_NOR_CLK, 0,
+};
+
+static const unsigned short ppi0_8b_mux[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const unsigned short ppi0_16b_mux[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const unsigned short ppi0_24b_mux[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+ P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
+ P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const unsigned short ppi1_8b_mux[] = {
+ P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
+ P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
+ P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
+ 0,
+};
+
+static const unsigned short ppi1_16b_mux[] = {
+ P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
+ P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
+ P_PPI1_D8, P_PPI1_D9, P_PPI1_D10, P_PPI1_D11,
+ P_PPI1_D12, P_PPI1_D13, P_PPI1_D14, P_PPI1_D15,
+ P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
+ 0,
+};
+
+static const unsigned short ppi2_8b_mux[] = {
+ P_PPI2_D0, P_PPI2_D1, P_PPI2_D2, P_PPI2_D3,
+ P_PPI2_D4, P_PPI2_D5, P_PPI2_D6, P_PPI2_D7,
+ P_PPI2_CLK, P_PPI2_FS1, P_PPI2_FS2,
+ 0,
+};
+
+static const unsigned short atapi_mux[] = {
+ P_ATAPI_RESET, P_ATAPI_DIOR, P_ATAPI_DIOW, P_ATAPI_CS0, P_ATAPI_CS1,
+ P_ATAPI_DMACK, P_ATAPI_DMARQ, P_ATAPI_INTRQ, P_ATAPI_IORDY,
+};
+
+static const unsigned short atapi_alter_mux[] = {
+ P_ATAPI_D0A, P_ATAPI_D1A, P_ATAPI_D2A, P_ATAPI_D3A, P_ATAPI_D4A,
+ P_ATAPI_D5A, P_ATAPI_D6A, P_ATAPI_D7A, P_ATAPI_D8A, P_ATAPI_D9A,
+ P_ATAPI_D10A, P_ATAPI_D11A, P_ATAPI_D12A, P_ATAPI_D13A, P_ATAPI_D14A,
+ P_ATAPI_D15A, P_ATAPI_A0A, P_ATAPI_A1A, P_ATAPI_A2A,
+ 0
+};
+
+static const unsigned short nfc0_mux[] = {
+ P_NAND_CE, P_NAND_RB,
+ 0
+};
+
+static const unsigned short keys_4x4_mux[] = {
+ P_KEY_ROW3, P_KEY_ROW2, P_KEY_ROW1, P_KEY_ROW0,
+ P_KEY_COL3, P_KEY_COL2, P_KEY_COL1, P_KEY_COL0,
+ 0
+};
+
+static const unsigned short keys_8x8_mux[] = {
+ P_KEY_ROW7, P_KEY_ROW6, P_KEY_ROW5, P_KEY_ROW4,
+ P_KEY_ROW3, P_KEY_ROW2, P_KEY_ROW1, P_KEY_ROW0,
+ P_KEY_COL7, P_KEY_COL6, P_KEY_COL5, P_KEY_COL4,
+ P_KEY_COL3, P_KEY_COL2, P_KEY_COL1, P_KEY_COL0,
+ 0
+};
+
+static const char * const uart0grp[] = { "uart0grp" };
+static const char * const uart1grp[] = { "uart1grp" };
+static const char * const uart1ctsrtsgrp[] = { "uart1ctsrtsgrp" };
+static const char * const uart2grp[] = { "uart2grp" };
+static const char * const uart3grp[] = { "uart3grp" };
+static const char * const uart3ctsrtsgrp[] = { "uart3ctsrtsgrp" };
+static const char * const rsi0grp[] = { "rsi0grp" };
+static const char * const spi0grp[] = { "spi0grp" };
+static const char * const spi1grp[] = { "spi1grp" };
+static const char * const twi0grp[] = { "twi0grp" };
+static const char * const twi1grp[] = { "twi1grp" };
+static const char * const rotarygrp[] = { "rotarygrp" };
+static const char * const can0grp[] = { "can0grp" };
+static const char * const can1grp[] = { "can1grp" };
+static const char * const smc0grp[] = { "smc0grp" };
+static const char * const sport0grp[] = { "sport0grp" };
+static const char * const sport1grp[] = { "sport1grp" };
+static const char * const sport2grp[] = { "sport2grp" };
+static const char * const sport3grp[] = { "sport3grp" };
+static const char * const ppi0_8bgrp[] = { "ppi0_8bgrp" };
+static const char * const ppi0_16bgrp[] = { "ppi0_16bgrp" };
+static const char * const ppi0_24bgrp[] = { "ppi0_24bgrp" };
+static const char * const ppi1_8bgrp[] = { "ppi1_8bgrp" };
+static const char * const ppi1_16bgrp[] = { "ppi1_16bgrp" };
+static const char * const ppi2_8bgrp[] = { "ppi2_8bgrp" };
+static const char * const atapigrp[] = { "atapigrp" };
+static const char * const atapialtergrp[] = { "atapialtergrp" };
+static const char * const nfc0grp[] = { "nfc0grp" };
+static const char * const keys_4x4grp[] = { "keys_4x4grp" };
+static const char * const keys_8x8grp[] = { "keys_8x8grp" };
+
+static const struct adi_pmx_func adi_pmx_functions[] = {
+ ADI_PMX_FUNCTION("uart0", uart0grp, uart0_mux),
+ ADI_PMX_FUNCTION("uart1", uart1grp, uart1_mux),
+ ADI_PMX_FUNCTION("uart1_ctsrts", uart1ctsrtsgrp, uart1_ctsrts_mux),
+ ADI_PMX_FUNCTION("uart2", uart2grp, uart2_mux),
+ ADI_PMX_FUNCTION("uart3", uart3grp, uart3_mux),
+ ADI_PMX_FUNCTION("uart3_ctsrts", uart3ctsrtsgrp, uart3_ctsrts_mux),
+ ADI_PMX_FUNCTION("rsi0", rsi0grp, rsi0_mux),
+ ADI_PMX_FUNCTION("spi0", spi0grp, spi0_mux),
+ ADI_PMX_FUNCTION("spi1", spi1grp, spi1_mux),
+ ADI_PMX_FUNCTION("twi0", twi0grp, twi0_mux),
+ ADI_PMX_FUNCTION("twi1", twi1grp, twi1_mux),
+ ADI_PMX_FUNCTION("rotary", rotarygrp, rotary_mux),
+ ADI_PMX_FUNCTION("can0", can0grp, can0_mux),
+ ADI_PMX_FUNCTION("can1", can1grp, can1_mux),
+ ADI_PMX_FUNCTION("smc0", smc0grp, smc0_mux),
+ ADI_PMX_FUNCTION("sport0", sport0grp, sport0_mux),
+ ADI_PMX_FUNCTION("sport1", sport1grp, sport1_mux),
+ ADI_PMX_FUNCTION("sport2", sport2grp, sport2_mux),
+ ADI_PMX_FUNCTION("sport3", sport3grp, sport3_mux),
+ ADI_PMX_FUNCTION("ppi0_8b", ppi0_8bgrp, ppi0_8b_mux),
+ ADI_PMX_FUNCTION("ppi0_16b", ppi0_16bgrp, ppi0_16b_mux),
+ ADI_PMX_FUNCTION("ppi0_24b", ppi0_24bgrp, ppi0_24b_mux),
+ ADI_PMX_FUNCTION("ppi1_8b", ppi1_8bgrp, ppi1_8b_mux),
+ ADI_PMX_FUNCTION("ppi1_16b", ppi1_16bgrp, ppi1_16b_mux),
+ ADI_PMX_FUNCTION("ppi2_8b", ppi2_8bgrp, ppi2_8b_mux),
+ ADI_PMX_FUNCTION("atapi", atapigrp, atapi_mux),
+ ADI_PMX_FUNCTION("atapi_alter", atapialtergrp, atapi_alter_mux),
+ ADI_PMX_FUNCTION("nfc0", nfc0grp, nfc0_mux),
+ ADI_PMX_FUNCTION("keys_4x4", keys_4x4grp, keys_4x4_mux),
+ ADI_PMX_FUNCTION("keys_8x8", keys_8x8grp, keys_8x8_mux),
+};
+
+static const struct adi_pinctrl_soc_data adi_bf54x_soc = {
+ .functions = adi_pmx_functions,
+ .nfunctions = ARRAY_SIZE(adi_pmx_functions),
+ .groups = adi_pin_groups,
+ .ngroups = ARRAY_SIZE(adi_pin_groups),
+ .pins = adi_pads,
+ .npins = ARRAY_SIZE(adi_pads),
+};
+
+void adi_pinctrl_soc_init(const struct adi_pinctrl_soc_data **soc)
+{
+ *soc = &adi_bf54x_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-adi2-bf60x.c b/drivers/pinctrl/pinctrl-adi2-bf60x.c
new file mode 100644
index 0000000..e90cb80
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-adi2-bf60x.c
@@ -0,0 +1,522 @@
+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+#include <asm/portmux.h>
+#include "pinctrl-adi2.h"
+
+static const struct pinctrl_pin_desc adi_pads[] = {
+ PINCTRL_PIN(0, "PA0"),
+ PINCTRL_PIN(1, "PA1"),
+ PINCTRL_PIN(2, "PA2"),
+ PINCTRL_PIN(3, "PG3"),
+ PINCTRL_PIN(4, "PA4"),
+ PINCTRL_PIN(5, "PA5"),
+ PINCTRL_PIN(6, "PA6"),
+ PINCTRL_PIN(7, "PA7"),
+ PINCTRL_PIN(8, "PA8"),
+ PINCTRL_PIN(9, "PA9"),
+ PINCTRL_PIN(10, "PA10"),
+ PINCTRL_PIN(11, "PA11"),
+ PINCTRL_PIN(12, "PA12"),
+ PINCTRL_PIN(13, "PA13"),
+ PINCTRL_PIN(14, "PA14"),
+ PINCTRL_PIN(15, "PA15"),
+ PINCTRL_PIN(16, "PB0"),
+ PINCTRL_PIN(17, "PB1"),
+ PINCTRL_PIN(18, "PB2"),
+ PINCTRL_PIN(19, "PB3"),
+ PINCTRL_PIN(20, "PB4"),
+ PINCTRL_PIN(21, "PB5"),
+ PINCTRL_PIN(22, "PB6"),
+ PINCTRL_PIN(23, "PB7"),
+ PINCTRL_PIN(24, "PB8"),
+ PINCTRL_PIN(25, "PB9"),
+ PINCTRL_PIN(26, "PB10"),
+ PINCTRL_PIN(27, "PB11"),
+ PINCTRL_PIN(28, "PB12"),
+ PINCTRL_PIN(29, "PB13"),
+ PINCTRL_PIN(30, "PB14"),
+ PINCTRL_PIN(31, "PB15"),
+ PINCTRL_PIN(32, "PC0"),
+ PINCTRL_PIN(33, "PC1"),
+ PINCTRL_PIN(34, "PC2"),
+ PINCTRL_PIN(35, "PC3"),
+ PINCTRL_PIN(36, "PC4"),
+ PINCTRL_PIN(37, "PC5"),
+ PINCTRL_PIN(38, "PC6"),
+ PINCTRL_PIN(39, "PC7"),
+ PINCTRL_PIN(40, "PC8"),
+ PINCTRL_PIN(41, "PC9"),
+ PINCTRL_PIN(42, "PC10"),
+ PINCTRL_PIN(43, "PC11"),
+ PINCTRL_PIN(44, "PC12"),
+ PINCTRL_PIN(45, "PC13"),
+ PINCTRL_PIN(46, "PC14"),
+ PINCTRL_PIN(47, "PC15"),
+ PINCTRL_PIN(48, "PD0"),
+ PINCTRL_PIN(49, "PD1"),
+ PINCTRL_PIN(50, "PD2"),
+ PINCTRL_PIN(51, "PD3"),
+ PINCTRL_PIN(52, "PD4"),
+ PINCTRL_PIN(53, "PD5"),
+ PINCTRL_PIN(54, "PD6"),
+ PINCTRL_PIN(55, "PD7"),
+ PINCTRL_PIN(56, "PD8"),
+ PINCTRL_PIN(57, "PD9"),
+ PINCTRL_PIN(58, "PD10"),
+ PINCTRL_PIN(59, "PD11"),
+ PINCTRL_PIN(60, "PD12"),
+ PINCTRL_PIN(61, "PD13"),
+ PINCTRL_PIN(62, "PD14"),
+ PINCTRL_PIN(63, "PD15"),
+ PINCTRL_PIN(64, "PE0"),
+ PINCTRL_PIN(65, "PE1"),
+ PINCTRL_PIN(66, "PE2"),
+ PINCTRL_PIN(67, "PE3"),
+ PINCTRL_PIN(68, "PE4"),
+ PINCTRL_PIN(69, "PE5"),
+ PINCTRL_PIN(70, "PE6"),
+ PINCTRL_PIN(71, "PE7"),
+ PINCTRL_PIN(72, "PE8"),
+ PINCTRL_PIN(73, "PE9"),
+ PINCTRL_PIN(74, "PE10"),
+ PINCTRL_PIN(75, "PE11"),
+ PINCTRL_PIN(76, "PE12"),
+ PINCTRL_PIN(77, "PE13"),
+ PINCTRL_PIN(78, "PE14"),
+ PINCTRL_PIN(79, "PE15"),
+ PINCTRL_PIN(80, "PF0"),
+ PINCTRL_PIN(81, "PF1"),
+ PINCTRL_PIN(82, "PF2"),
+ PINCTRL_PIN(83, "PF3"),
+ PINCTRL_PIN(84, "PF4"),
+ PINCTRL_PIN(85, "PF5"),
+ PINCTRL_PIN(86, "PF6"),
+ PINCTRL_PIN(87, "PF7"),
+ PINCTRL_PIN(88, "PF8"),
+ PINCTRL_PIN(89, "PF9"),
+ PINCTRL_PIN(90, "PF10"),
+ PINCTRL_PIN(91, "PF11"),
+ PINCTRL_PIN(92, "PF12"),
+ PINCTRL_PIN(93, "PF13"),
+ PINCTRL_PIN(94, "PF14"),
+ PINCTRL_PIN(95, "PF15"),
+ PINCTRL_PIN(96, "PG0"),
+ PINCTRL_PIN(97, "PG1"),
+ PINCTRL_PIN(98, "PG2"),
+ PINCTRL_PIN(99, "PG3"),
+ PINCTRL_PIN(100, "PG4"),
+ PINCTRL_PIN(101, "PG5"),
+ PINCTRL_PIN(102, "PG6"),
+ PINCTRL_PIN(103, "PG7"),
+ PINCTRL_PIN(104, "PG8"),
+ PINCTRL_PIN(105, "PG9"),
+ PINCTRL_PIN(106, "PG10"),
+ PINCTRL_PIN(107, "PG11"),
+ PINCTRL_PIN(108, "PG12"),
+ PINCTRL_PIN(109, "PG13"),
+ PINCTRL_PIN(110, "PG14"),
+ PINCTRL_PIN(111, "PG15"),
+};
+
+static const unsigned uart0_pins[] = {
+ GPIO_PD7, GPIO_PD8,
+};
+
+static const unsigned uart0_ctsrts_pins[] = {
+ GPIO_PD9, GPIO_PD10,
+};
+
+static const unsigned uart1_pins[] = {
+ GPIO_PG15, GPIO_PG14,
+};
+
+static const unsigned uart1_ctsrts_pins[] = {
+ GPIO_PG10, GPIO_PG13,
+};
+
+static const unsigned rsi0_pins[] = {
+ GPIO_PG3, GPIO_PG2, GPIO_PG0, GPIO_PE15, GPIO_PG5, GPIO_PG6,
+};
+
+static const unsigned eth0_pins[] = {
+ GPIO_PC6, GPIO_PC7, GPIO_PC2, GPIO_PC0, GPIO_PC3, GPIO_PC1,
+ GPIO_PB13, GPIO_PD6, GPIO_PC5, GPIO_PC4, GPIO_PB14, GPIO_PB15,
+};
+
+static const unsigned eth1_pins[] = {
+ GPIO_PE10, GPIO_PE11, GPIO_PG3, GPIO_PG0, GPIO_PG2, GPIO_PE15,
+ GPIO_PG5, GPIO_PE12, GPIO_PE13, GPIO_PE14, GPIO_PG6, GPIO_PC9,
+};
+
+static const unsigned spi0_pins[] = {
+ GPIO_PD4, GPIO_PD2, GPIO_PD3,
+};
+
+static const unsigned spi1_pins[] = {
+ GPIO_PD5, GPIO_PD14, GPIO_PD13,
+};
+
+static const unsigned twi0_pins[] = {
+};
+
+static const unsigned twi1_pins[] = {
+};
+
+static const unsigned rotary_pins[] = {
+ GPIO_PG7, GPIO_PG11, GPIO_PG12,
+};
+
+static const unsigned can0_pins[] = {
+ GPIO_PG1, GPIO_PG4,
+};
+
+static const unsigned smc0_pins[] = {
+ GPIO_PA0, GPIO_PA1, GPIO_PA2, GPIO_PA3, GPIO_PA4, GPIO_PA5, GPIO_PA6,
+ GPIO_PA7, GPIO_PA8, GPIO_PA9, GPIO_PB2, GPIO_PA10, GPIO_PA11,
+ GPIO_PB3, GPIO_PA12, GPIO_PA13, GPIO_PA14, GPIO_PA15, GPIO_PB6,
+ GPIO_PB7, GPIO_PB8, GPIO_PB10, GPIO_PB11, GPIO_PB0,
+};
+
+static const unsigned sport0_pins[] = {
+ GPIO_PB5, GPIO_PB4, GPIO_PB9, GPIO_PB8, GPIO_PB7, GPIO_PB11,
+};
+
+static const unsigned sport1_pins[] = {
+ GPIO_PE2, GPIO_PE5, GPIO_PD15, GPIO_PE4, GPIO_PE3, GPIO_PE1,
+};
+
+static const unsigned sport2_pins[] = {
+ GPIO_PG4, GPIO_PG1, GPIO_PG9, GPIO_PG10, GPIO_PG7, GPIO_PB12,
+};
+
+static const unsigned ppi0_8b_pins[] = {
+ GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
+ GPIO_PF7, GPIO_PF13, GPIO_PF14, GPIO_PF15,
+ GPIO_PE6, GPIO_PE7, GPIO_PE8, GPIO_PE9,
+};
+
+static const unsigned ppi0_16b_pins[] = {
+ GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
+ GPIO_PF7, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
+ GPIO_PF13, GPIO_PF14, GPIO_PF15,
+ GPIO_PE6, GPIO_PE7, GPIO_PE8, GPIO_PE9,
+};
+
+static const unsigned ppi0_24b_pins[] = {
+ GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
+ GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
+ GPIO_PF13, GPIO_PF14, GPIO_PF15, GPIO_PE0, GPIO_PE1, GPIO_PE2,
+ GPIO_PE3, GPIO_PE4, GPIO_PE5, GPIO_PE6, GPIO_PE7, GPIO_PE8,
+ GPIO_PE9, GPIO_PD12, GPIO_PD15,
+};
+
+static const unsigned ppi1_8b_pins[] = {
+ GPIO_PC0, GPIO_PC1, GPIO_PC2, GPIO_PC3, GPIO_PC4, GPIO_PC5, GPIO_PC6,
+ GPIO_PC7, GPIO_PC8, GPIO_PB13, GPIO_PB14, GPIO_PB15, GPIO_PD6,
+};
+
+static const unsigned ppi1_16b_pins[] = {
+ GPIO_PC0, GPIO_PC1, GPIO_PC2, GPIO_PC3, GPIO_PC4, GPIO_PC5, GPIO_PC6,
+ GPIO_PC7, GPIO_PC9, GPIO_PC10, GPIO_PC11, GPIO_PC12,
+ GPIO_PC13, GPIO_PC14, GPIO_PC15,
+ GPIO_PB13, GPIO_PB14, GPIO_PB15, GPIO_PD6,
+};
+
+static const unsigned ppi2_8b_pins[] = {
+ GPIO_PA0, GPIO_PA1, GPIO_PA2, GPIO_PA3, GPIO_PA4, GPIO_PA5, GPIO_PA6,
+ GPIO_PA7, GPIO_PB0, GPIO_PB1, GPIO_PB2, GPIO_PB3,
+};
+
+static const unsigned ppi2_16b_pins[] = {
+ GPIO_PA0, GPIO_PA1, GPIO_PA2, GPIO_PA3, GPIO_PA4, GPIO_PA5, GPIO_PA6,
+ GPIO_PA7, GPIO_PA8, GPIO_PA9, GPIO_PA10, GPIO_PA11, GPIO_PA12,
+ GPIO_PA13, GPIO_PA14, GPIO_PA15,
+ GPIO_PA7, GPIO_PB0, GPIO_PB1, GPIO_PB2, GPIO_PB3,
+};
+
+static const unsigned lp0_pins[] = {
+ GPIO_PB0, GPIO_PB1, GPIO_PA0, GPIO_PA1, GPIO_PA2, GPIO_PA3,
+ GPIO_PA4, GPIO_PA5, GPIO_PA6, GPIO_PA7,
+};
+
+static const unsigned lp1_pins[] = {
+ GPIO_PB3, GPIO_PB2, GPIO_PA8, GPIO_PA9, GPIO_PA10, GPIO_PA11,
+ GPIO_PA12, GPIO_PA13, GPIO_PA14, GPIO_PA15,
+};
+
+static const unsigned lp2_pins[] = {
+ GPIO_PE6, GPIO_PE7, GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3,
+ GPIO_PF4, GPIO_PF5, GPIO_PF6, GPIO_PF7,
+};
+
+static const unsigned lp3_pins[] = {
+ GPIO_PE9, GPIO_PE8, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
+ GPIO_PF12, GPIO_PF13, GPIO_PF14, GPIO_PF15,
+};
+
+static const struct adi_pin_group adi_pin_groups[] = {
+ ADI_PIN_GROUP("uart0grp", uart0_pins),
+ ADI_PIN_GROUP("uart0ctsrtsgrp", uart0_ctsrts_pins),
+ ADI_PIN_GROUP("uart1grp", uart1_pins),
+ ADI_PIN_GROUP("uart1ctsrtsgrp", uart1_ctsrts_pins),
+ ADI_PIN_GROUP("rsi0grp", rsi0_pins),
+ ADI_PIN_GROUP("eth0grp", eth0_pins),
+ ADI_PIN_GROUP("eth1grp", eth1_pins),
+ ADI_PIN_GROUP("spi0grp", spi0_pins),
+ ADI_PIN_GROUP("spi1grp", spi1_pins),
+ ADI_PIN_GROUP("twi0grp", twi0_pins),
+ ADI_PIN_GROUP("twi1grp", twi1_pins),
+ ADI_PIN_GROUP("rotarygrp", rotary_pins),
+ ADI_PIN_GROUP("can0grp", can0_pins),
+ ADI_PIN_GROUP("smc0grp", smc0_pins),
+ ADI_PIN_GROUP("sport0grp", sport0_pins),
+ ADI_PIN_GROUP("sport1grp", sport1_pins),
+ ADI_PIN_GROUP("sport2grp", sport2_pins),
+ ADI_PIN_GROUP("ppi0_8bgrp", ppi0_8b_pins),
+ ADI_PIN_GROUP("ppi0_16bgrp", ppi0_16b_pins),
+ ADI_PIN_GROUP("ppi0_24bgrp", ppi0_24b_pins),
+ ADI_PIN_GROUP("ppi1_8bgrp", ppi1_8b_pins),
+ ADI_PIN_GROUP("ppi1_16bgrp", ppi1_16b_pins),
+ ADI_PIN_GROUP("ppi2_8bgrp", ppi2_8b_pins),
+ ADI_PIN_GROUP("ppi2_16bgrp", ppi2_16b_pins),
+ ADI_PIN_GROUP("lp0grp", lp0_pins),
+ ADI_PIN_GROUP("lp1grp", lp1_pins),
+ ADI_PIN_GROUP("lp2grp", lp2_pins),
+ ADI_PIN_GROUP("lp3grp", lp3_pins),
+};
+
+static const unsigned short uart0_mux[] = {
+ P_UART0_TX, P_UART0_RX,
+ 0
+};
+
+static const unsigned short uart0_ctsrts_mux[] = {
+ P_UART0_RTS, P_UART0_CTS,
+ 0
+};
+
+static const unsigned short uart1_mux[] = {
+ P_UART1_TX, P_UART1_RX,
+ 0
+};
+
+static const unsigned short uart1_ctsrts_mux[] = {
+ P_UART1_RTS, P_UART1_CTS,
+ 0
+};
+
+static const unsigned short rsi0_mux[] = {
+ P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3,
+ P_RSI_CMD, P_RSI_CLK, 0
+};
+
+static const unsigned short eth0_mux[] = P_RMII0;
+static const unsigned short eth1_mux[] = P_RMII1;
+
+static const unsigned short spi0_mux[] = {
+ P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0
+};
+
+static const unsigned short spi1_mux[] = {
+ P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0
+};
+
+static const unsigned short twi0_mux[] = {
+ P_TWI0_SCL, P_TWI0_SDA, 0
+};
+
+static const unsigned short twi1_mux[] = {
+ P_TWI1_SCL, P_TWI1_SDA, 0
+};
+
+static const unsigned short rotary_mux[] = {
+ P_CNT_CUD, P_CNT_CDG, P_CNT_CZM, 0
+};
+
+static const unsigned short sport0_mux[] = {
+ P_SPORT0_ACLK, P_SPORT0_AFS, P_SPORT0_AD0, P_SPORT0_BCLK,
+ P_SPORT0_BFS, P_SPORT0_BD0, 0,
+};
+
+static const unsigned short sport1_mux[] = {
+ P_SPORT1_ACLK, P_SPORT1_AFS, P_SPORT1_AD0, P_SPORT1_BCLK,
+ P_SPORT1_BFS, P_SPORT1_BD0, 0,
+};
+
+static const unsigned short sport2_mux[] = {
+ P_SPORT2_ACLK, P_SPORT2_AFS, P_SPORT2_AD0, P_SPORT2_BCLK,
+ P_SPORT2_BFS, P_SPORT2_BD0, 0,
+};
+
+static const unsigned short can0_mux[] = {
+ P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static const unsigned short smc0_mux[] = {
+ P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
+ P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
+ P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
+};
+
+static const unsigned short ppi0_8b_mux[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const unsigned short ppi0_16b_mux[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const unsigned short ppi0_24b_mux[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+ P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
+ P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const unsigned short ppi1_8b_mux[] = {
+ P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
+ P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
+ P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
+ 0,
+};
+
+static const unsigned short ppi1_16b_mux[] = {
+ P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
+ P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
+ P_PPI1_D8, P_PPI1_D9, P_PPI1_D10, P_PPI1_D11,
+ P_PPI1_D12, P_PPI1_D13, P_PPI1_D14, P_PPI1_D15,
+ P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
+ 0,
+};
+
+static const unsigned short ppi2_8b_mux[] = {
+ P_PPI2_D0, P_PPI2_D1, P_PPI2_D2, P_PPI2_D3,
+ P_PPI2_D4, P_PPI2_D5, P_PPI2_D6, P_PPI2_D7,
+ P_PPI2_CLK, P_PPI2_FS1, P_PPI2_FS2,
+ 0,
+};
+
+static const unsigned short ppi2_16b_mux[] = {
+ P_PPI2_D0, P_PPI2_D1, P_PPI2_D2, P_PPI2_D3,
+ P_PPI2_D4, P_PPI2_D5, P_PPI2_D6, P_PPI2_D7,
+ P_PPI2_D8, P_PPI2_D9, P_PPI2_D10, P_PPI2_D11,
+ P_PPI2_D12, P_PPI2_D13, P_PPI2_D14, P_PPI2_D15,
+ P_PPI2_CLK, P_PPI2_FS1, P_PPI2_FS2,
+ 0,
+};
+
+static const unsigned short lp0_mux[] = {
+ P_LP0_CLK, P_LP0_ACK, P_LP0_D0, P_LP0_D1, P_LP0_D2,
+ P_LP0_D3, P_LP0_D4, P_LP0_D5, P_LP0_D6, P_LP0_D7,
+ 0
+};
+
+static const unsigned short lp1_mux[] = {
+ P_LP1_CLK, P_LP1_ACK, P_LP1_D0, P_LP1_D1, P_LP1_D2,
+ P_LP1_D3, P_LP1_D4, P_LP1_D5, P_LP1_D6, P_LP1_D7,
+ 0
+};
+
+static const unsigned short lp2_mux[] = {
+ P_LP2_CLK, P_LP2_ACK, P_LP2_D0, P_LP2_D1, P_LP2_D2,
+ P_LP2_D3, P_LP2_D4, P_LP2_D5, P_LP2_D6, P_LP2_D7,
+ 0
+};
+
+static const unsigned short lp3_mux[] = {
+ P_LP3_CLK, P_LP3_ACK, P_LP3_D0, P_LP3_D1, P_LP3_D2,
+ P_LP3_D3, P_LP3_D4, P_LP3_D5, P_LP3_D6, P_LP3_D7,
+ 0
+};
+
+static const char * const uart0grp[] = { "uart0grp" };
+static const char * const uart0ctsrtsgrp[] = { "uart0ctsrtsgrp" };
+static const char * const uart1grp[] = { "uart1grp" };
+static const char * const uart1ctsrtsgrp[] = { "uart1ctsrtsgrp" };
+static const char * const rsi0grp[] = { "rsi0grp" };
+static const char * const eth0grp[] = { "eth0grp" };
+static const char * const eth1grp[] = { "eth1grp" };
+static const char * const spi0grp[] = { "spi0grp" };
+static const char * const spi1grp[] = { "spi1grp" };
+static const char * const twi0grp[] = { "twi0grp" };
+static const char * const twi1grp[] = { "twi1grp" };
+static const char * const rotarygrp[] = { "rotarygrp" };
+static const char * const can0grp[] = { "can0grp" };
+static const char * const smc0grp[] = { "smc0grp" };
+static const char * const sport0grp[] = { "sport0grp" };
+static const char * const sport1grp[] = { "sport1grp" };
+static const char * const sport2grp[] = { "sport2grp" };
+static const char * const ppi0_8bgrp[] = { "ppi0_8bgrp" };
+static const char * const ppi0_16bgrp[] = { "ppi0_16bgrp" };
+static const char * const ppi0_24bgrp[] = { "ppi0_24bgrp" };
+static const char * const ppi1_8bgrp[] = { "ppi1_8bgrp" };
+static const char * const ppi1_16bgrp[] = { "ppi1_16bgrp" };
+static const char * const ppi2_8bgrp[] = { "ppi2_8bgrp" };
+static const char * const ppi2_16bgrp[] = { "ppi2_16bgrp" };
+static const char * const lp0grp[] = { "lp0grp" };
+static const char * const lp1grp[] = { "lp1grp" };
+static const char * const lp2grp[] = { "lp2grp" };
+static const char * const lp3grp[] = { "lp3grp" };
+
+static const struct adi_pmx_func adi_pmx_functions[] = {
+ ADI_PMX_FUNCTION("uart0", uart0grp, uart0_mux),
+ ADI_PMX_FUNCTION("uart0_ctsrts", uart0ctsrtsgrp, uart0_ctsrts_mux),
+ ADI_PMX_FUNCTION("uart1", uart1grp, uart1_mux),
+ ADI_PMX_FUNCTION("uart1_ctsrts", uart1ctsrtsgrp, uart1_ctsrts_mux),
+ ADI_PMX_FUNCTION("rsi0", rsi0grp, rsi0_mux),
+ ADI_PMX_FUNCTION("eth0", eth0grp, eth0_mux),
+ ADI_PMX_FUNCTION("eth1", eth1grp, eth1_mux),
+ ADI_PMX_FUNCTION("spi0", spi0grp, spi0_mux),
+ ADI_PMX_FUNCTION("spi1", spi1grp, spi1_mux),
+ ADI_PMX_FUNCTION("twi0", twi0grp, twi0_mux),
+ ADI_PMX_FUNCTION("twi1", twi1grp, twi1_mux),
+ ADI_PMX_FUNCTION("rotary", rotarygrp, rotary_mux),
+ ADI_PMX_FUNCTION("can0", can0grp, can0_mux),
+ ADI_PMX_FUNCTION("smc0", smc0grp, smc0_mux),
+ ADI_PMX_FUNCTION("sport0", sport0grp, sport0_mux),
+ ADI_PMX_FUNCTION("sport1", sport1grp, sport1_mux),
+ ADI_PMX_FUNCTION("sport2", sport2grp, sport2_mux),
+ ADI_PMX_FUNCTION("ppi0_8b", ppi0_8bgrp, ppi0_8b_mux),
+ ADI_PMX_FUNCTION("ppi0_16b", ppi0_16bgrp, ppi0_16b_mux),
+ ADI_PMX_FUNCTION("ppi0_24b", ppi0_24bgrp, ppi0_24b_mux),
+ ADI_PMX_FUNCTION("ppi1_8b", ppi1_8bgrp, ppi1_8b_mux),
+ ADI_PMX_FUNCTION("ppi1_16b", ppi1_16bgrp, ppi1_16b_mux),
+ ADI_PMX_FUNCTION("ppi2_8b", ppi2_8bgrp, ppi2_8b_mux),
+ ADI_PMX_FUNCTION("ppi2_16b", ppi2_16bgrp, ppi2_16b_mux),
+ ADI_PMX_FUNCTION("lp0", lp0grp, lp0_mux),
+ ADI_PMX_FUNCTION("lp1", lp1grp, lp1_mux),
+ ADI_PMX_FUNCTION("lp2", lp2grp, lp2_mux),
+ ADI_PMX_FUNCTION("lp3", lp3grp, lp3_mux),
+};
+
+static const struct adi_pinctrl_soc_data adi_bf60x_soc = {
+ .functions = adi_pmx_functions,
+ .nfunctions = ARRAY_SIZE(adi_pmx_functions),
+ .groups = adi_pin_groups,
+ .ngroups = ARRAY_SIZE(adi_pin_groups),
+ .pins = adi_pads,
+ .npins = ARRAY_SIZE(adi_pads),
+};
+
+void adi_pinctrl_soc_init(const struct adi_pinctrl_soc_data **soc)
+{
+ *soc = &adi_bf60x_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-adi2.c b/drivers/pinctrl/pinctrl-adi2.c
new file mode 100644
index 0000000..7a24e59
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-adi2.c
@@ -0,0 +1,1183 @@
+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#include <linux/platform_data/pinctrl-adi2.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <asm/portmux.h>
+#include "pinctrl-adi2.h"
+#include "core.h"
+
+/*
+According to the BF54x HRM, pint means "pin interrupt".
+http://www.analog.com/static/imported-files/processor_manuals/ADSP-BF54x_hwr_rev1.2.pdf
+
+ADSP-BF54x processor Blackfin processors have four SIC interrupt chan-
+nels dedicated to pin interrupt purposes. These channels are managed by
+four hardware blocks, called PINT0, PINT1, PINT2, and PINT3. Every PINTx
+block can sense to up to 32 pins. While PINT0 and PINT1 can sense the
+pins of port A and port B, PINT2 and PINT3 manage all the pins from port
+C to port J as shown in Figure 9-2.
+
+n BF54x HRM:
+The ten GPIO ports are subdivided into 8-bit half ports, resulting in lower and
+upper half 8-bit units. The PINTx_ASSIGN registers control the 8-bit multi-
+plexers shown in Figure 9-3. Lower half units of eight pins can be
+forwarded to either byte 0 or byte 2 of either associated PINTx block.
+Upper half units can be forwarded to either byte 1 or byte 3 of the pin
+interrupt blocks, without further restrictions.
+
+All MMR registers in the pin interrupt module are 32 bits wide. To simply the
+mapping logic, this driver only maps a 16-bit gpio port to the upper or lower
+16 bits of a PINTx block. You can find the Figure 9-3 on page 583.
+
+Each IRQ domain is binding to a GPIO bank device. 2 GPIO bank devices can map
+to one PINT device. Two in "struct gpio_pint" are used to ease the PINT
+interrupt handler.
+
+The GPIO bank mapping to the lower 16 bits of the PINT device set its IRQ
+domain pointer in domain[0]. The IRQ domain pointer of the other bank is set
+to domain[1]. PINT interrupt handler adi_gpio_handle_pint_irq() finds out
+the current domain pointer according to whether the interrupt request mask
+is in lower 16 bits (domain[0]) or upper 16bits (domain[1]).
+
+A PINT device is not part of a GPIO port device in Blackfin. Multiple GPIO
+port devices can be mapped to the same PINT device.
+
+*/
+
+static LIST_HEAD(adi_pint_list);
+static LIST_HEAD(adi_gpio_port_list);
+
+#define DRIVER_NAME "pinctrl-adi2"
+
+#define PINT_HI_OFFSET 16
+
+/**
+ * struct gpio_port_saved - GPIO port registers that should be saved between
+ * power suspend and resume operations.
+ *
+ * @fer: PORTx_FER register
+ * @data: PORTx_DATA register
+ * @dir: PORTx_DIR register
+ * @inen: PORTx_INEN register
+ * @mux: PORTx_MUX register
+ */
+struct gpio_port_saved {
+ u16 fer;
+ u16 data;
+ u16 dir;
+ u16 inen;
+ u32 mux;
+};
+
+/**
+ * struct gpio_pint - Pin interrupt controller device. Multiple ADI GPIO
+ * banks can be mapped into one Pin interrupt controller.
+ *
+ * @node: All gpio_pint instances are added to a global list.
+ * @base: PINT device register base address
+ * @irq: IRQ of the PINT device, it is the parent IRQ of all
+ * GPIO IRQs mapping to this device.
+ * @domain: [0] irq domain of the gpio port, whose hardware interrupts are
+ * mapping to the low 16-bit of the pint registers.
+ * [1] irq domain of the gpio port, whose hardware interrupts are
+ * mapping to the high 16-bit of the pint registers.
+ * @regs: address pointer to the PINT device
+ * @map_count: No more than 2 GPIO banks can be mapped to this PINT device.
+ * @lock: This lock make sure the irq_chip operations to one PINT device
+ * for different GPIO interrrupts are atomic.
+ * @pint_map_port: Set up the mapping between one PINT device and
+ * multiple GPIO banks.
+ */
+struct gpio_pint {
+ struct list_head node;
+ void __iomem *base;
+ int irq;
+ struct irq_domain *domain[2];
+ struct gpio_pint_regs *regs;
+ struct adi_pm_pint_save saved_data;
+ int map_count;
+ spinlock_t lock;
+
+ int (*pint_map_port)(struct gpio_pint *pint, bool assign,
+ u8 map, struct irq_domain *domain);
+};
+
+/**
+ * ADI pin controller
+ *
+ * @dev: a pointer back to containing device
+ * @pctl: the pinctrl device
+ * @soc: SoC data for this specific chip
+ */
+struct adi_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *pctl;
+ const struct adi_pinctrl_soc_data *soc;
+};
+
+/**
+ * struct gpio_port - GPIO bank device. Multiple ADI GPIO banks can be mapped
+ * into one pin interrupt controller.
+ *
+ * @node: All gpio_port instances are added to a list.
+ * @base: GPIO bank device register base address
+ * @irq_base: base IRQ of the GPIO bank device
+ * @width: PIN number of the GPIO bank device
+ * @regs: address pointer to the GPIO bank device
+ * @saved_data: registers that should be saved between PM operations.
+ * @dev: device structure of this GPIO bank
+ * @pint: GPIO PINT device that this GPIO bank mapped to
+ * @pint_map: GIOP bank mapping code in PINT device
+ * @pint_assign: The 32-bit PINT registers can be divided into 2 parts. A
+ * GPIO bank can be mapped into either low 16 bits[0] or high 16
+ * bits[1] of each PINT register.
+ * @lock: This lock make sure the irq_chip operations to one PINT device
+ * for different GPIO interrrupts are atomic.
+ * @chip: abstract a GPIO controller
+ * @domain: The irq domain owned by the GPIO port.
+ * @rsvmap: Reservation map array for each pin in the GPIO bank
+ */
+struct gpio_port {
+ struct list_head node;
+ void __iomem *base;
+ unsigned int irq_base;
+ unsigned int width;
+ struct gpio_port_t *regs;
+ struct gpio_port_saved saved_data;
+ struct device *dev;
+
+ struct gpio_pint *pint;
+ u8 pint_map;
+ bool pint_assign;
+
+ spinlock_t lock;
+ struct gpio_chip chip;
+ struct irq_domain *domain;
+};
+
+static inline u8 pin_to_offset(struct pinctrl_gpio_range *range, unsigned pin)
+{
+ return pin - range->pin_base;
+}
+
+static inline u32 hwirq_to_pintbit(struct gpio_port *port, int hwirq)
+{
+ return port->pint_assign ? BIT(hwirq) << PINT_HI_OFFSET : BIT(hwirq);
+}
+
+static struct gpio_pint *find_gpio_pint(unsigned id)
+{
+ struct gpio_pint *pint;
+ int i = 0;
+
+ list_for_each_entry(pint, &adi_pint_list, node) {
+ if (id == i)
+ return pint;
+ i++;
+ }
+
+ return NULL;
+}
+
+static inline void port_setup(struct gpio_port *port, unsigned offset,
+ bool use_for_gpio)
+{
+ struct gpio_port_t *regs = port->regs;
+
+ if (use_for_gpio)
+ writew(readw(®s->port_fer) & ~BIT(offset),
+ ®s->port_fer);
+ else
+ writew(readw(®s->port_fer) | BIT(offset), ®s->port_fer);
+}
+
+static inline void portmux_setup(struct gpio_port *port, unsigned offset,
+ unsigned short function)
+{
+ struct gpio_port_t *regs = port->regs;
+ u32 pmux;
+
+ pmux = readl(®s->port_mux);
+
+ /* The function field of each pin has 2 consecutive bits in
+ * the mux register.
+ */
+ pmux &= ~(0x3 << (2 * offset));
+ pmux |= (function & 0x3) << (2 * offset);
+
+ writel(pmux, ®s->port_mux);
+}
+
+static inline u16 get_portmux(struct gpio_port *port, unsigned offset)
+{
+ struct gpio_port_t *regs = port->regs;
+ u32 pmux = readl(®s->port_mux);
+
+ /* The function field of each pin has 2 consecutive bits in
+ * the mux register.
+ */
+ return pmux >> (2 * offset) & 0x3;
+}
+
+static void adi_gpio_ack_irq(struct irq_data *d)
+{
+ unsigned long flags;
+ struct gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct gpio_pint_regs *regs = port->pint->regs;
+ unsigned pintbit = hwirq_to_pintbit(port, d->hwirq);
+
+ spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->pint->lock, flags);
+
+ if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
+ if (readl(®s->invert_set) & pintbit)
+ writel(pintbit, ®s->invert_clear);
+ else
+ writel(pintbit, ®s->invert_set);
+ }
+
+ writel(pintbit, ®s->request);
+
+ spin_unlock_irqrestore(&port->pint->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void adi_gpio_mask_ack_irq(struct irq_data *d)
+{
+ unsigned long flags;
+ struct gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct gpio_pint_regs *regs = port->pint->regs;
+ unsigned pintbit = hwirq_to_pintbit(port, d->hwirq);
+
+ spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->pint->lock, flags);
+
+ if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
+ if (readl(®s->invert_set) & pintbit)
+ writel(pintbit, ®s->invert_clear);
+ else
+ writel(pintbit, ®s->invert_set);
+ }
+
+ writel(pintbit, ®s->request);
+ writel(pintbit, ®s->mask_clear);
+
+ spin_unlock_irqrestore(&port->pint->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void adi_gpio_mask_irq(struct irq_data *d)
+{
+ unsigned long flags;
+ struct gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct gpio_pint_regs *regs = port->pint->regs;
+
+ spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->pint->lock, flags);
+
+ writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_clear);
+
+ spin_unlock_irqrestore(&port->pint->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void adi_gpio_unmask_irq(struct irq_data *d)
+{
+ unsigned long flags;
+ struct gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct gpio_pint_regs *regs = port->pint->regs;
+
+ spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->pint->lock, flags);
+
+ writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_set);
+
+ spin_unlock_irqrestore(&port->pint->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static unsigned int adi_gpio_irq_startup(struct irq_data *d)
+{
+ unsigned long flags;
+ struct gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct gpio_pint_regs *regs = port->pint->regs;
+
+ if (!port) {
+ dev_err(port->dev, "GPIO IRQ %d :Not exist\n", d->irq);
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->pint->lock, flags);
+
+ port_setup(port, d->hwirq, true);
+ writew(BIT(d->hwirq), &port->regs->dir_clear);
+ writew(readw(&port->regs->inen) | BIT(d->hwirq), &port->regs->inen);
+
+ writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_set);
+
+ spin_unlock_irqrestore(&port->pint->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static void adi_gpio_irq_shutdown(struct irq_data *d)
+{
+ unsigned long flags;
+ struct gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct gpio_pint_regs *regs = port->pint->regs;
+
+ spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->pint->lock, flags);
+
+ writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_clear);
+
+ spin_unlock_irqrestore(&port->pint->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int adi_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+ unsigned long flags;
+ struct gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct gpio_pint_regs *pint_regs = port->pint->regs;
+ unsigned pintmask;
+ unsigned int irq = d->irq;
+ int ret = 0;
+ char buf[16];
+
+ if (!port) {
+ dev_err(port->dev, "GPIO IRQ %d :Not exist\n", irq);
+ return -ENODEV;
+ }
+
+ pintmask = hwirq_to_pintbit(port, d->hwirq);
+
+ spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->pint->lock, flags);
+
+ /* In case of interrupt autodetect, set irq type to edge sensitive. */
+ if (type == IRQ_TYPE_PROBE)
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+ snprintf(buf, 16, "gpio-irq%d", irq);
+ port_setup(port, d->hwirq, true);
+ } else
+ goto out;
+
+ /* The GPIO interrupt is triggered only when its input value
+ * transfer from 0 to 1. So, invert the input value if the
+ * irq type is low or falling
+ */
+ if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+ writel(pintmask, &pint_regs->invert_set);
+ else
+ writel(pintmask, &pint_regs->invert_clear);
+
+ /* In edge sensitive case, if the input value of the requested irq
+ * is already 1, invert it.
+ */
+ if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+ if (gpio_get_value(port->chip.base + d->hwirq))
+ writel(pintmask, &pint_regs->invert_set);
+ else
+ writel(pintmask, &pint_regs->invert_clear);
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ writel(pintmask, &pint_regs->edge_set);
+ __irq_set_handler_locked(irq, handle_edge_irq);
+ } else {
+ writel(pintmask, &pint_regs->edge_clear);
+ __irq_set_handler_locked(irq, handle_level_irq);
+ }
+
+out:
+ spin_unlock_irqrestore(&port->pint->lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int adi_gpio_set_wake(struct irq_data *d, unsigned int state)
+{
+ struct gpio_port *port = irq_data_get_irq_chip_data(d);
+
+ if (!port || !port->pint || port->pint->irq != d->irq)
+ return -EINVAL;
+
+#ifndef SEC_GCTL
+ adi_internal_set_wake(port->pint->irq, state);
+#endif
+
+ return 0;
+}
+
+static int adi_pint_suspend(void)
+{
+ struct gpio_pint *pint;
+
+ list_for_each_entry(pint, &adi_pint_list, node) {
+ writel(0xffffffff, &pint->regs->mask_clear);
+ pint->saved_data.assign = readl(&pint->regs->assign);
+ pint->saved_data.edge_set = readl(&pint->regs->edge_set);
+ pint->saved_data.invert_set = readl(&pint->regs->invert_set);
+ }
+
+ return 0;
+}
+
+static void adi_pint_resume(void)
+{
+ struct gpio_pint *pint;
+
+ list_for_each_entry(pint, &adi_pint_list, node) {
+ writel(pint->saved_data.assign, &pint->regs->assign);
+ writel(pint->saved_data.edge_set, &pint->regs->edge_set);
+ writel(pint->saved_data.invert_set, &pint->regs->invert_set);
+ }
+}
+
+static int adi_gpio_suspend(void)
+{
+ struct gpio_port *port;
+
+ list_for_each_entry(port, &adi_gpio_port_list, node) {
+ port->saved_data.fer = readw(&port->regs->port_fer);
+ port->saved_data.mux = readl(&port->regs->port_mux);
+ port->saved_data.data = readw(&port->regs->data);
+ port->saved_data.inen = readw(&port->regs->inen);
+ port->saved_data.dir = readw(&port->regs->dir_set);
+ }
+
+ return adi_pint_suspend();
+}
+
+static void adi_gpio_resume(void)
+{
+ struct gpio_port *port;
+
+ adi_pint_resume();
+
+ list_for_each_entry(port, &adi_gpio_port_list, node) {
+ writel(port->saved_data.mux, &port->regs->port_mux);
+ writew(port->saved_data.fer, &port->regs->port_fer);
+ writew(port->saved_data.inen, &port->regs->inen);
+ writew(port->saved_data.data & port->saved_data.dir,
+ &port->regs->data_set);
+ writew(port->saved_data.dir, &port->regs->dir_set);
+ }
+
+}
+
+static struct syscore_ops gpio_pm_syscore_ops = {
+ .suspend = adi_gpio_suspend,
+ .resume = adi_gpio_resume,
+};
+#else /* CONFIG_PM */
+#define adi_gpio_set_wake NULL
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
+static inline void preflow_handler(struct irq_desc *desc)
+{
+ if (desc->preflow_handler)
+ desc->preflow_handler(&desc->irq_data);
+}
+#else
+static inline void preflow_handler(struct irq_desc *desc) { }
+#endif
+
+static void adi_gpio_handle_pint_irq(unsigned int inta_irq,
+ struct irq_desc *desc)
+{
+ u32 request;
+ u32 level_mask, hwirq;
+ bool umask = false;
+ struct gpio_pint *pint = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct gpio_pint_regs *regs = pint->regs;
+ struct irq_domain *domain;
+
+ preflow_handler(desc);
+ chained_irq_enter(chip, desc);
+
+ request = readl(®s->request);
+ level_mask = readl(®s->edge_set) & request;
+
+ hwirq = 0;
+ domain = pint->domain[0];
+ while (request) {
+ /* domain pointer need to be changed only once at IRQ 16 when
+ * we go through IRQ requests from bit 0 to bit 31.
+ */
+ if (hwirq == PINT_HI_OFFSET)
+ domain = pint->domain[1];
+
+ if (request & 1) {
+ if (level_mask & BIT(hwirq)) {
+ umask = true;
+ chained_irq_exit(chip, desc);
+ }
+ generic_handle_irq(irq_find_mapping(domain,
+ hwirq % PINT_HI_OFFSET));
+ }
+
+ hwirq++;
+ request >>= 1;
+ }
+
+ if (!umask)
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip adi_gpio_irqchip = {
+ .name = "GPIO",
+ .irq_ack = adi_gpio_ack_irq,
+ .irq_mask = adi_gpio_mask_irq,
+ .irq_mask_ack = adi_gpio_mask_ack_irq,
+ .irq_unmask = adi_gpio_unmask_irq,
+ .irq_disable = adi_gpio_mask_irq,
+ .irq_enable = adi_gpio_unmask_irq,
+ .irq_set_type = adi_gpio_irq_type,
+ .irq_startup = adi_gpio_irq_startup,
+ .irq_shutdown = adi_gpio_irq_shutdown,
+ .irq_set_wake = adi_gpio_set_wake,
+};
+
+static int adi_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pinctrl->soc->ngroups;
+}
+
+static const char *adi_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pinctrl->soc->groups[selector].name;
+}
+
+static int adi_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = pinctrl->soc->groups[selector].pins;
+ *num_pins = pinctrl->soc->groups[selector].num;
+ return 0;
+}
+
+static struct pinctrl_ops adi_pctrl_ops = {
+ .get_groups_count = adi_get_groups_count,
+ .get_group_name = adi_get_group_name,
+ .get_group_pins = adi_get_group_pins,
+};
+
+static int adi_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group)
+{
+ struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_port *port;
+ struct pinctrl_gpio_range *range;
+ unsigned long flags;
+ unsigned short *mux, pin;
+
+ mux = (unsigned short *)pinctrl->soc->functions[selector].mux;
+
+ while (*mux) {
+ pin = P_IDENT(*mux);
+
+ range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
+ if (range == NULL) /* should not happen */
+ return -ENODEV;
+
+ port = container_of(range->gc, struct gpio_port, chip);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ portmux_setup(port, pin_to_offset(range, pin),
+ P_FUNCT2MUX(*mux));
+ port_setup(port, pin_to_offset(range, pin), false);
+ mux++;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+
+ return 0;
+}
+
+static void adi_pinmux_disable(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group)
+{
+ struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_port *port;
+ struct pinctrl_gpio_range *range;
+ unsigned long flags;
+ unsigned short *mux, pin;
+
+ mux = (unsigned short *)pinctrl->soc->functions[selector].mux;
+
+ while (*mux) {
+ pin = P_IDENT(*mux);
+
+ range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
+ if (range == NULL) /* should not happen */
+ return;
+
+ port = container_of(range->gc, struct gpio_port, chip);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ port_setup(port, pin_to_offset(range, pin), true);
+ mux++;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+}
+
+static int adi_pinmux_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+ struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pinctrl->soc->nfunctions;
+}
+
+static const char *adi_pinmux_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pinctrl->soc->functions[selector].name;
+}
+
+static int adi_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pinctrl->soc->functions[selector].groups;
+ *num_groups = pinctrl->soc->functions[selector].num_groups;
+ return 0;
+}
+
+static int adi_pinmux_request_gpio(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range, unsigned pin)
+{
+ struct gpio_port *port;
+ unsigned long flags;
+ u8 offset;
+
+ port = container_of(range->gc, struct gpio_port, chip);
+ offset = pin_to_offset(range, pin);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ port_setup(port, offset, true);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static struct pinmux_ops adi_pinmux_ops = {
+ .enable = adi_pinmux_enable,
+ .disable = adi_pinmux_disable,
+ .get_functions_count = adi_pinmux_get_funcs_count,
+ .get_function_name = adi_pinmux_get_func_name,
+ .get_function_groups = adi_pinmux_get_groups,
+ .gpio_request_enable = adi_pinmux_request_gpio,
+};
+
+
+static struct pinctrl_desc adi_pinmux_desc = {
+ .name = DRIVER_NAME,
+ .pctlops = &adi_pctrl_ops,
+ .pmxops = &adi_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static int adi_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(chip->base + offset);
+}
+
+static void adi_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(chip->base + offset);
+}
+
+static int adi_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_port *port;
+ unsigned long flags;
+
+ port = container_of(chip, struct gpio_port, chip);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ writew(BIT(offset), &port->regs->dir_clear);
+ writew(readw(&port->regs->inen) | BIT(offset), &port->regs->inen);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static void adi_gpio_set_value(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct gpio_port *port = container_of(chip, struct gpio_port, chip);
+ struct gpio_port_t *regs = port->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (value)
+ writew(1 << offset, ®s->data_set);
+ else
+ writew(1 << offset, ®s->data_clear);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int adi_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct gpio_port *port = container_of(chip, struct gpio_port, chip);
+ struct gpio_port_t *regs = port->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ writew(readw(®s->inen) & ~(1 << offset), ®s->inen);
+ adi_gpio_set_value(chip, offset, value);
+ writew(1 << offset, ®s->dir_set);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static int adi_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_port *port = container_of(chip, struct gpio_port, chip);
+ struct gpio_port_t *regs = port->regs;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ret = !!(readw(®s->data) & BIT(offset));
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return ret;
+}
+
+static int adi_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_port *port = container_of(chip, struct gpio_port, chip);
+
+ if (port->irq_base >= 0)
+ return irq_find_mapping(port->domain, offset);
+ else
+ return irq_create_mapping(port->domain, offset);
+}
+
+static int adi_pint_map_port(struct gpio_pint *pint, bool assign, u8 map,
+ struct irq_domain *domain)
+{
+ struct gpio_pint_regs *regs = pint->regs;
+ u32 map_mask;
+
+ if (pint->map_count > 1)
+ return -EINVAL;
+
+ pint->map_count++;
+
+ /* The map_mask of each gpio port is a 16-bit duplicate
+ * of the 8-bit map. It can be set to either high 16 bits or low
+ * 16 bits of the pint assignment register.
+ */
+ map_mask = (map << 8) | map;
+ if (assign) {
+ map_mask <<= PINT_HI_OFFSET;
+ writel((readl(®s->assign) & 0xFFFF) | map_mask,
+ ®s->assign);
+ } else
+ writel((readl(®s->assign) & 0xFFFF0000) | map_mask,
+ ®s->assign);
+
+ pint->domain[assign] = domain;
+
+ return 0;
+}
+
+static int adi_gpio_pint_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct gpio_pint *pint;
+
+ pint = devm_kzalloc(dev, sizeof(struct gpio_pint), GFP_KERNEL);
+ if (!pint) {
+ dev_err(dev, "Memory alloc failed\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Invalid mem resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(dev, res->start, resource_size(res),
+ pdev->name)) {
+ dev_err(dev, "Region already claimed\n");
+ return -EBUSY;
+ }
+
+ pint->base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!pint->base) {
+ dev_err(dev, "Could not ioremap\n");
+ return -ENOMEM;
+ }
+
+ pint->regs = (struct gpio_pint_regs *)pint->base;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "Invalid IRQ resource\n");
+ return -ENODEV;
+ }
+
+ spin_lock_init(&pint->lock);
+
+ pint->irq = res->start;
+ pint->pint_map_port = adi_pint_map_port;
+ platform_set_drvdata(pdev, pint);
+
+ irq_set_chained_handler(pint->irq, adi_gpio_handle_pint_irq);
+ irq_set_handler_data(pint->irq, pint);
+
+ list_add_tail(&pint->node, &adi_pint_list);
+
+ return 0;
+}
+
+static int adi_gpio_pint_remove(struct platform_device *pdev)
+{
+ struct gpio_pint *pint = platform_get_drvdata(pdev);
+
+ list_del(&pint->node);
+ irq_set_handler(pint->irq, handle_simple_irq);
+
+ return 0;
+}
+
+static int adi_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct gpio_port *port = d->host_data;
+
+ if (!port)
+ return -EINVAL;
+
+ irq_set_chip_data(irq, port);
+ irq_set_chip_and_handler(irq, &adi_gpio_irqchip,
+ handle_level_irq);
+
+ return 0;
+}
+
+const struct irq_domain_ops adi_gpio_irq_domain_ops = {
+ .map = adi_gpio_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int adi_gpio_init_int(struct gpio_port *port)
+{
+ struct device_node *node = port->dev->of_node;
+ struct gpio_pint *pint = port->pint;
+ int ret;
+
+ port->domain = irq_domain_add_linear(node, port->width,
+ &adi_gpio_irq_domain_ops, port);
+ if (!port->domain) {
+ dev_err(port->dev, "Failed to create irqdomain\n");
+ return -ENOSYS;
+ }
+
+ /* According to BF54x and BF60x HRM, pin interrupt devices are not
+ * part of the GPIO port device. in GPIO interrupt mode, the GPIO
+ * pins of multiple port devices can be routed into one pin interrupt
+ * device. The mapping can be configured by setting pint assignment
+ * register with the mapping value of different GPIO port. This is
+ * done via function pint_map_port().
+ */
+ ret = pint->pint_map_port(port->pint, port->pint_assign,
+ port->pint_map, port->domain);
+ if (ret)
+ return ret;
+
+ if (port->irq_base >= 0) {
+ ret = irq_create_strict_mappings(port->domain, port->irq_base,
+ 0, port->width);
+ if (ret) {
+ dev_err(port->dev, "Couldn't associate to domain\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+#define DEVNAME_SIZE 16
+
+static int adi_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct adi_pinctrl_gpio_platform_data *pdata;
+ struct resource *res;
+ struct gpio_port *port;
+ char pinctrl_devname[DEVNAME_SIZE];
+ static int gpio;
+ int ret = 0, ret1;
+
+ pdata = dev->platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ port = devm_kzalloc(dev, sizeof(struct gpio_port), GFP_KERNEL);
+ if (!port) {
+ dev_err(dev, "Memory alloc failed\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Invalid mem resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(dev, res->start, resource_size(res),
+ pdev->name)) {
+ dev_err(dev, "Region already claimed\n");
+ return -EBUSY;
+ }
+
+ port->base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!port->base) {
+ dev_err(dev, "Could not ioremap\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res)
+ port->irq_base = -1;
+ else
+ port->irq_base = res->start;
+
+ port->width = pdata->port_width;
+ port->dev = dev;
+ port->regs = (struct gpio_port_t *)port->base;
+ port->pint_assign = pdata->pint_assign;
+ port->pint_map = pdata->pint_map;
+
+ port->pint = find_gpio_pint(pdata->pint_id);
+ if (port->pint) {
+ ret = adi_gpio_init_int(port);
+ if (ret)
+ return ret;
+ }
+
+ spin_lock_init(&port->lock);
+
+ platform_set_drvdata(pdev, port);
+
+ port->chip.label = "adi-gpio";
+ port->chip.direction_input = adi_gpio_direction_input;
+ port->chip.get = adi_gpio_get_value;
+ port->chip.direction_output = adi_gpio_direction_output;
+ port->chip.set = adi_gpio_set_value;
+ port->chip.request = adi_gpio_request;
+ port->chip.free = adi_gpio_free;
+ port->chip.to_irq = adi_gpio_to_irq;
+ if (pdata->port_gpio_base > 0)
+ port->chip.base = pdata->port_gpio_base;
+ else
+ port->chip.base = gpio;
+ port->chip.ngpio = port->width;
+ gpio = port->chip.base + port->width;
+
+ ret = gpiochip_add(&port->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "Fail to add GPIO chip.\n");
+ goto out_remove_domain;
+ }
+
+ /* Add gpio pin range */
+ snprintf(pinctrl_devname, DEVNAME_SIZE, "pinctrl-adi2.%d",
+ pdata->pinctrl_id);
+ pinctrl_devname[DEVNAME_SIZE - 1] = 0;
+ ret = gpiochip_add_pin_range(&port->chip, pinctrl_devname,
+ 0, pdata->port_pin_base, port->width);
+ if (ret) {
+ dev_err(&pdev->dev, "Fail to add pin range to %s.\n",
+ pinctrl_devname);
+ goto out_remove_gpiochip;
+ }
+
+ list_add_tail(&port->node, &adi_gpio_port_list);
+
+ return 0;
+
+out_remove_gpiochip:
+ ret1 = gpiochip_remove(&port->chip);
+out_remove_domain:
+ if (port->pint)
+ irq_domain_remove(port->domain);
+
+ return ret;
+}
+
+static int adi_gpio_remove(struct platform_device *pdev)
+{
+ struct gpio_port *port = platform_get_drvdata(pdev);
+ int ret;
+ u8 offset;
+
+ list_del(&port->node);
+ gpiochip_remove_pin_ranges(&port->chip);
+ ret = gpiochip_remove(&port->chip);
+ if (port->pint) {
+ for (offset = 0; offset < port->width; offset++)
+ irq_dispose_mapping(irq_find_mapping(port->domain,
+ offset));
+ irq_domain_remove(port->domain);
+ }
+
+ return ret;
+}
+
+static int adi_pinctrl_probe(struct platform_device *pdev)
+{
+ struct adi_pinctrl *pinctrl;
+
+ pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
+ if (!pinctrl)
+ return -ENOMEM;
+
+ pinctrl->dev = &pdev->dev;
+
+ adi_pinctrl_soc_init(&pinctrl->soc);
+
+ adi_pinmux_desc.pins = pinctrl->soc->pins;
+ adi_pinmux_desc.npins = pinctrl->soc->npins;
+
+ /* Now register the pin controller and all pins it handles */
+ pinctrl->pctl = pinctrl_register(&adi_pinmux_desc, &pdev->dev, pinctrl);
+ if (!pinctrl->pctl) {
+ dev_err(&pdev->dev, "could not register pinctrl ADI2 driver\n");
+ return -EINVAL;
+ }
+
+ platform_set_drvdata(pdev, pinctrl);
+
+ return 0;
+}
+
+static int adi_pinctrl_remove(struct platform_device *pdev)
+{
+ struct adi_pinctrl *pinctrl = platform_get_drvdata(pdev);
+
+ pinctrl_unregister(pinctrl->pctl);
+
+ return 0;
+}
+
+static struct platform_driver adi_pinctrl_driver = {
+ .probe = adi_pinctrl_probe,
+ .remove = adi_pinctrl_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static struct platform_driver adi_gpio_pint_driver = {
+ .probe = adi_gpio_pint_probe,
+ .remove = adi_gpio_pint_remove,
+ .driver = {
+ .name = "adi-gpio-pint",
+ },
+};
+
+static struct platform_driver adi_gpio_driver = {
+ .probe = adi_gpio_probe,
+ .remove = adi_gpio_remove,
+ .driver = {
+ .name = "adi-gpio",
+ },
+};
+
+static int __init adi_pinctrl_setup(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&adi_pinctrl_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&adi_gpio_pint_driver);
+ if (ret)
+ goto pint_error;
+
+ ret = platform_driver_register(&adi_gpio_driver);
+ if (ret)
+ goto gpio_error;
+
+#ifdef CONFIG_PM
+ register_syscore_ops(&gpio_pm_syscore_ops);
+#endif
+ return ret;
+gpio_error:
+ platform_driver_unregister(&adi_gpio_pint_driver);
+pint_error:
+ platform_driver_unregister(&adi_pinctrl_driver);
+
+ return ret;
+}
+arch_initcall(adi_pinctrl_setup);
+
+MODULE_AUTHOR("Sonic Zhang <[email protected]>");
+MODULE_DESCRIPTION("ADI gpio2 pin control driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/pinctrl-adi2.h b/drivers/pinctrl/pinctrl-adi2.h
new file mode 100644
index 0000000..1f06f8d
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-adi2.h
@@ -0,0 +1,75 @@
+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+#ifndef PINCTRL_PINCTRL_ADI2_H
+#define PINCTRL_PINCTRL_ADI2_H
+
+#include <linux/pinctrl/pinctrl.h>
+
+ /**
+ * struct adi_pin_group - describes a pin group
+ * @name: the name of this pin group
+ * @pins: an array of pins
+ * @num: the number of pins in this array
+ */
+struct adi_pin_group {
+ const char *name;
+ const unsigned *pins;
+ const unsigned num;
+};
+
+#define ADI_PIN_GROUP(n, p) \
+ { \
+ .name = n, \
+ .pins = p, \
+ .num = ARRAY_SIZE(p), \
+ }
+
+ /**
+ * struct adi_pmx_func - describes function mux setting of pin groups
+ * @name: the name of this function mux setting
+ * @groups: an array of pin groups
+ * @num_groups: the number of pin groups in this array
+ * @mux: the function mux setting array, end by zero
+ */
+struct adi_pmx_func {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+ const unsigned short *mux;
+};
+
+#define ADI_PMX_FUNCTION(n, g, m) \
+ { \
+ .name = n, \
+ .groups = g, \
+ .num_groups = ARRAY_SIZE(g), \
+ .mux = m, \
+ }
+
+/**
+ * struct adi_pinctrl_soc_data - ADI pin controller per-SoC configuration
+ * @functions: The functions supported on this SoC.
+ * @nfunction: The number of entries in @functions.
+ * @groups: An array describing all pin groups the pin SoC supports.
+ * @ngroups: The number of entries in @groups.
+ * @pins: An array describing all pins the pin controller affects.
+ * @npins: The number of entries in @pins.
+ */
+struct adi_pinctrl_soc_data {
+ const struct adi_pmx_func *functions;
+ int nfunctions;
+ const struct adi_pin_group *groups;
+ int ngroups;
+ const struct pinctrl_pin_desc *pins;
+ int npins;
+};
+
+void adi_pinctrl_soc_init(const struct adi_pinctrl_soc_data **soc);
+
+#endif /* PINCTRL_PINCTRL_ADI2_H */
diff --git a/include/linux/platform_data/pinctrl-adi2.h b/include/linux/platform_data/pinctrl-adi2.h
new file mode 100644
index 0000000..8f91300
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-adi2.h
@@ -0,0 +1,40 @@
+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+
+#ifndef PINCTRL_ADI2_H
+#define PINCTRL_ADI2_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+/**
+ * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data
+ * for ADI GPIO2 device.
+ *
+ * @port_gpio_base: Optional global GPIO index of the GPIO bank.
+ * 0 means driver decides.
+ * @port_pin_base: Pin index of the pin controller device.
+ * @port_width: PIN number of the GPIO bank device
+ * @pint_id: GPIO PINT device id that this GPIO bank should map to.
+ * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A
+ * GPIO bank can be mapped into either low 16 bits[0] or high 16
+ * bits[1] of each PINT register.
+ * @pint_map: GIOP bank mapping code in PINT device
+ */
+struct adi_pinctrl_gpio_platform_data {
+ unsigned int port_gpio_base;
+ unsigned int port_pin_base;
+ unsigned int port_width;
+ u8 pinctrl_id;
+ u8 pint_id;
+ bool pint_assign;
+ u8 pint_map;
+};
+
+#endif
--
1.8.2.3
From: Sonic Zhang <[email protected]>
- Remove non gpio lib code from blackfin architecture.
- Limit the lagecy blackfin gpio driver to bf5xx processors only.
- Remove unused definition of the pint power functions.
Signed-off-by: Sonic Zhang <[email protected]>
Acked-by: Linus Walleij <[email protected]>
---
arch/blackfin/Kconfig | 7 ++
arch/blackfin/include/asm/gpio.h | 157 +++++----------------------------------
arch/blackfin/kernel/Makefile | 3 +-
3 files changed, 29 insertions(+), 138 deletions(-)
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index a117652..9eff25b 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -52,6 +52,9 @@ config GENERIC_BUG
config ZONE_DMA
def_bool y
+config GENERIC_GPIO
+ def_bool y
+
config FORCE_MAX_ZONEORDER
int
default "14"
@@ -317,6 +320,10 @@ config BF53x
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
+config GPIO_ADI
+ def_bool y
+ depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
+
config MEM_MT48LC64M4A2FB_7E
bool
depends on (BFIN533_STAMP)
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 98d0133..99d338c 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -25,8 +25,12 @@
#ifndef __ASSEMBLY__
+#ifndef CONFIG_PINCTRL
+
#include <linux/compiler.h>
-#include <linux/gpio.h>
+#include <asm/blackfin.h>
+#include <asm/portmux.h>
+#include <asm/irq_handler.h>
/***********************************************************
*
@@ -45,7 +49,6 @@
* MODIFICATION HISTORY :
**************************************************************/
-#if !BFIN_GPIO_PINT
void set_gpio_dir(unsigned, unsigned short);
void set_gpio_inen(unsigned, unsigned short);
void set_gpio_polar(unsigned, unsigned short);
@@ -115,7 +118,6 @@ struct gpio_port_t {
unsigned short dummy16;
unsigned short inen;
};
-#endif
#ifdef BFIN_SPECIAL_GPIO_BANKS
void bfin_special_gpio_free(unsigned gpio);
@@ -127,25 +129,21 @@ void bfin_special_gpio_pm_hibernate_suspend(void);
#endif
#ifdef CONFIG_PM
-int bfin_pm_standby_ctrl(unsigned ctrl);
+void bfin_gpio_pm_hibernate_restore(void);
+void bfin_gpio_pm_hibernate_suspend(void);
+int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
+int bfin_gpio_pm_standby_ctrl(unsigned ctrl);
static inline int bfin_pm_standby_setup(void)
{
- return bfin_pm_standby_ctrl(1);
+ return bfin_gpio_pm_standby_ctrl(1);
}
static inline void bfin_pm_standby_restore(void)
{
- bfin_pm_standby_ctrl(0);
+ bfin_gpio_pm_standby_ctrl(0);
}
-void bfin_gpio_pm_hibernate_restore(void);
-void bfin_gpio_pm_hibernate_suspend(void);
-void bfin_pint_suspend(void);
-void bfin_pint_resume(void);
-
-# if !BFIN_GPIO_PINT
-int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
struct gpio_port_s {
unsigned short data;
@@ -161,7 +159,6 @@ struct gpio_port_s {
unsigned short reserved;
unsigned short mux;
};
-# endif
#endif /*CONFIG_PM*/
/***********************************************************
@@ -178,36 +175,29 @@ struct gpio_port_s {
*************************************************************
* MODIFICATION HISTORY :
**************************************************************/
-
-int bfin_gpio_request(unsigned gpio, const char *label);
-void bfin_gpio_free(unsigned gpio);
int bfin_gpio_irq_request(unsigned gpio, const char *label);
void bfin_gpio_irq_free(unsigned gpio);
-int bfin_gpio_direction_input(unsigned gpio);
-int bfin_gpio_direction_output(unsigned gpio, int value);
-int bfin_gpio_get_value(unsigned gpio);
-void bfin_gpio_set_value(unsigned gpio, int value);
+void bfin_gpio_irq_prepare(unsigned gpio);
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq - GPIO_IRQ_BASE;
+}
+#endif /* CONFIG_PINCTRL */
#include <asm/irq.h>
#include <asm/errno.h>
-#ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h> /* cansleep wrappers */
static inline int gpio_get_value(unsigned int gpio)
{
- if (gpio < MAX_BLACKFIN_GPIOS)
- return bfin_gpio_get_value(gpio);
- else
- return __gpio_get_value(gpio);
+ return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
- if (gpio < MAX_BLACKFIN_GPIOS)
- bfin_gpio_set_value(gpio, value);
- else
- __gpio_set_value(gpio, value);
+ __gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
@@ -219,113 +209,6 @@ static inline int gpio_to_irq(unsigned gpio)
{
return __gpio_to_irq(gpio);
}
-
-#else /* !CONFIG_GPIOLIB */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return bfin_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- return bfin_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return bfin_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return bfin_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
- return -EINVAL;
-}
-
-static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-{
- int err;
-
- err = bfin_gpio_request(gpio, label);
- if (err)
- return err;
-
- if (flags & GPIOF_DIR_IN)
- err = bfin_gpio_direction_input(gpio);
- else
- err = bfin_gpio_direction_output(gpio,
- (flags & GPIOF_INIT_HIGH) ? 1 : 0);
-
- if (err)
- bfin_gpio_free(gpio);
-
- return err;
-}
-
-static inline int gpio_request_array(const struct gpio *array, size_t num)
-{
- int i, err;
-
- for (i = 0; i < num; i++, array++) {
- err = gpio_request_one(array->gpio, array->flags, array->label);
- if (err)
- goto err_free;
- }
- return 0;
-
-err_free:
- while (i--)
- bfin_gpio_free((--array)->gpio);
- return err;
-}
-
-static inline void gpio_free_array(const struct gpio *array, size_t num)
-{
- while (num--)
- bfin_gpio_free((array++)->gpio);
-}
-
-static inline int __gpio_get_value(unsigned gpio)
-{
- return bfin_gpio_get_value(gpio);
-}
-
-static inline void __gpio_set_value(unsigned gpio, int value)
-{
- return bfin_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- return __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- if (likely(gpio < MAX_BLACKFIN_GPIOS))
- return gpio + GPIO_IRQ_BASE;
-
- return -EINVAL;
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-#endif /* !CONFIG_GPIOLIB */
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return (irq - GPIO_IRQ_BASE);
-}
-
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 735f24e..703dc7c 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y := vmlinux.lds
obj-y := \
entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
- fixed_code.o reboot.o bfin_gpio.o bfin_dma.o \
+ fixed_code.o reboot.o bfin_dma.o \
exception.o dumpstack.o
ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
@@ -16,6 +16,7 @@ else
obj-y += time.o
endif
+obj-$(CONFIG_GPIO_ADI) += bfin_gpio.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
--
1.8.2.3
From: Sonic Zhang <[email protected]>
- Remove unused macro MAX_RESOURCES
- Override blackfin legacy peripheral pinmux request and free APIs by
devm_pinctrl_get_select_default() to init the peripheral portmux setting.
v3-chagnes:
- Move pinctrl soc data out of blackfin arch folder.
Signed-off-by: Sonic Zhang <[email protected]>
---
arch/blackfin/Kconfig | 4 ++++
arch/blackfin/include/asm/portmux.h | 19 +++++++++++++++++--
arch/blackfin/mach-bf548/include/mach/portmux.h | 2 --
arch/blackfin/mach-bf609/include/mach/portmux.h | 2 --
4 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 9eff25b..ed7157f 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -324,6 +324,10 @@ config GPIO_ADI
def_bool y
depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
+config PINCTRL
+ def_bool y
+ depends on BF54x || BF60x
+
config MEM_MT48LC64M4A2FB_7E
bool
depends on (BFIN533_STAMP)
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
index 9b1e2c3..7aa2043 100644
--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -17,14 +17,29 @@
#define P_MAYSHARE 0x2000
#define P_DONTCARE 0x1000
-
+#ifdef CONFIG_PINCTRL
+#include <asm/irq_handler.h>
+
+#define gpio_pint_regs bfin_pint_regs
+#define adi_internal_set_wake bfin_internal_set_wake
+
+#define peripheral_request(per, label) 0
+#define peripheral_free(per)
+#define peripheral_request_list(per, label) \
+ (pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \
+ ? -EINVAL : 0) : 0)
+#define peripheral_free_list(per)
+#else
int peripheral_request(unsigned short per, const char *label);
void peripheral_free(unsigned short per);
int peripheral_request_list(const unsigned short per[], const char *label);
void peripheral_free_list(const unsigned short per[]);
+#endif
-#include <asm/gpio.h>
+#include <linux/err.h>
+#include <linux/pinctrl/pinctrl.h>
#include <mach/portmux.h>
+#include <linux/gpio.h>
#ifndef P_SPORT2_TFS
#define P_SPORT2_TFS P_UNDEF
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index e222462..d9f8632 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -7,8 +7,6 @@
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
-#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
-
#define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
#define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
#define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf609/include/mach/portmux.h b/arch/blackfin/mach-bf609/include/mach/portmux.h
index 2e1a51c..fe34191 100644
--- a/arch/blackfin/mach-bf609/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf609/include/mach/portmux.h
@@ -7,8 +7,6 @@
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
-#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
-
/* EMAC RMII Port Mux */
#define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
#define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
--
1.8.2.3
PING
On Tue, Sep 3, 2013 at 4:28 PM, Sonic Zhang <[email protected]> wrote:
> From: Sonic Zhang <[email protected]>
>
> The new ADI GPIO2 controller was introduced since the BF548 and BF60x
> processors. It differs a lot from the old one on BF5xx processors. So,
> create a pinctrl driver under the pinctrl framework.
>
> - Define gpio ports and pin interrupt controllers as individual platform
> devices.
> - Register a pinctrl driver for the whole GPIO ports and pin interrupt
> devices.
> - Probe pint devices before port devices. Put device instances into
> the global gpio and pint lists.
> - Define peripheral, irq and gpio reservation bit masks for each gpio
> port as runtime resources.
> - Save and restore gpio port and pint status MMRs in syscore PM functions.
> - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x
> and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data
> in pin controller probe function. Get the pin groups and functions via
> the soc data reference.
> - Call gpiochip_add_pin_range() in gpio device probe function to register
> range cross reference between gpio device and pin control device.
> - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object
> by container_of() and find adi_pinctrl by pin control device name.
> - Handle peripheral and gpio requests in pinctrl operation functions.
> - Demux gpio IRQs via the irq_domain created by each GPIO port.
>
> Signed-off-by: Sonic Zhang <[email protected]>
>
> ---
> v2-changes:
> - Remove unlinke() directive.
>
> v3-changes:
> - Rename struct adi_pmx to adi_pinctrl.
> - Fix the comments of struct gpio_pint.
> - Remove unused pin_base in struct gpio_port.
> - Change pint_assign into bool type.
> - Add comments about the relationship between pint device and port device
> to the driver header.
> - Use BIT macro to shift bit.
> - Remove all bitmap reservation help functions. Inline reservation functions
> into the actual code.
> - Remove gpio and offset mutual reference help functions.
> - Remove all help functions to find gpio_port and adi_pinctrl structs. Get
> range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by
> container_of() and find adi_pinctrl by pin control device name.
> - Pass bool type usage variable to port_setup help function.
> - Separate long bit operations into several lines and add comments.
> - Use debugfs to output all GPIO request information.
> - Avoid to set drvdata to NULL
> - Add explanation to function adi_gpio_init_int()
> - Call gpiochip_add_pin_range() in gpio device probe function to register
> range cross reference between gpio device and pin control device.
> - Remove the reference to pin control device from the gpio_port struct.
> Remove the reference list to gpio device from the adi_pinctrl struct.
> Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through
> the gpio list to do power suspend and resume operations.
> - Remove the global GPIO base from struct adi_pinctrl, define pin base in
> the platform data for each GPIO port device.
> - Initialize adi_pinctrl_setup in arch_initcall().
> - print the status of triggers, whether it is in GPIO mode, if it is
> flagged to be used as IRQ, etc in adi_pin_dbg_show().
> - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x
> and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data
> in pin controller probe function. Get the pin groups and functions via
> the soc data reference.
>
> v4-changes:
> - remove useless system_state checking.
> - replace dev_err with dev_warn in both irq and gpio pin cases.
> - comment on relationship between irq type and invert operation.
> - It is not necessary to check the reservation mode of the requested
> pin in IRQ chip operation. Remove the reservation map.
> - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2
> driver specific debugfs output.
> - Add linkport group and function information for bf60x.
> - Separate uart and ctsrts pins into 2 groups.
> - Separate APAPI and alternative ATAPI pins into 2 groups.
>
> Signed-off-by: Sonic Zhang <[email protected]>
> ---
> drivers/pinctrl/Kconfig | 17 +
> drivers/pinctrl/Makefile | 3 +
> drivers/pinctrl/pinctrl-adi2-bf54x.c | 592 ++++++++++++++
> drivers/pinctrl/pinctrl-adi2-bf60x.c | 522 ++++++++++++
> drivers/pinctrl/pinctrl-adi2.c | 1183 ++++++++++++++++++++++++++++
> drivers/pinctrl/pinctrl-adi2.h | 75 ++
> include/linux/platform_data/pinctrl-adi2.h | 40 +
> 7 files changed, 2432 insertions(+)
> create mode 100644 drivers/pinctrl/pinctrl-adi2-bf54x.c
> create mode 100644 drivers/pinctrl/pinctrl-adi2-bf60x.c
> create mode 100644 drivers/pinctrl/pinctrl-adi2.c
> create mode 100644 drivers/pinctrl/pinctrl-adi2.h
> create mode 100644 include/linux/platform_data/pinctrl-adi2.h
>
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 8f66924..08b8337 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -49,6 +49,23 @@ config PINCTRL_AB8505
> bool "AB8505 pin controller driver"
> depends on PINCTRL_ABX500 && ARCH_U8500
>
> +config PINCTRL_ADI2
> + bool "ADI pin controller driver"
> + select PINMUX
> + select IRQ_DOMAIN
> + help
> + This is the pin controller and gpio driver for ADI BF54x, BF60x and
> + future processors. This option is selected automatically when specific
> + machine and arch are selected to build.
> +
> +config PINCTRL_BF54x
> + def_bool y if BF54x
> + select PINCTRL_ADI2
> +
> +config PINCTRL_BF60x
> + def_bool y if BF60x
> + select PINCTRL_ADI2
> +
> config PINCTRL_AT91
> bool "AT91 pinctrl driver"
> depends on OF
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index 9bdaeb8..4701180 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -14,6 +14,9 @@ obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
> obj-$(CONFIG_PINCTRL_AB8540) += pinctrl-ab8540.o
> obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o
> obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
> +obj-$(CONFIG_PINCTRL_ADI2) += pinctrl-adi2.o
> +obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o
> +obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o
> obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
> obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
> obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
> diff --git a/drivers/pinctrl/pinctrl-adi2-bf54x.c b/drivers/pinctrl/pinctrl-adi2-bf54x.c
> new file mode 100644
> index 0000000..ea9d9ab
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-adi2-bf54x.c
> @@ -0,0 +1,592 @@
> +/*
> + * Pinctrl Driver for ADI GPIO2 controller
> + *
> + * Copyright 2007-2013 Analog Devices Inc.
> + *
> + * Licensed under the GPLv2 or later
> + */
> +
> +#include <asm/portmux.h>
> +#include "pinctrl-adi2.h"
> +
> +static const struct pinctrl_pin_desc adi_pads[] = {
> + PINCTRL_PIN(0, "PA0"),
> + PINCTRL_PIN(1, "PA1"),
> + PINCTRL_PIN(2, "PA2"),
> + PINCTRL_PIN(3, "PG3"),
> + PINCTRL_PIN(4, "PA4"),
> + PINCTRL_PIN(5, "PA5"),
> + PINCTRL_PIN(6, "PA6"),
> + PINCTRL_PIN(7, "PA7"),
> + PINCTRL_PIN(8, "PA8"),
> + PINCTRL_PIN(9, "PA9"),
> + PINCTRL_PIN(10, "PA10"),
> + PINCTRL_PIN(11, "PA11"),
> + PINCTRL_PIN(12, "PA12"),
> + PINCTRL_PIN(13, "PA13"),
> + PINCTRL_PIN(14, "PA14"),
> + PINCTRL_PIN(15, "PA15"),
> + PINCTRL_PIN(16, "PB0"),
> + PINCTRL_PIN(17, "PB1"),
> + PINCTRL_PIN(18, "PB2"),
> + PINCTRL_PIN(19, "PB3"),
> + PINCTRL_PIN(20, "PB4"),
> + PINCTRL_PIN(21, "PB5"),
> + PINCTRL_PIN(22, "PB6"),
> + PINCTRL_PIN(23, "PB7"),
> + PINCTRL_PIN(24, "PB8"),
> + PINCTRL_PIN(25, "PB9"),
> + PINCTRL_PIN(26, "PB10"),
> + PINCTRL_PIN(27, "PB11"),
> + PINCTRL_PIN(28, "PB12"),
> + PINCTRL_PIN(29, "PB13"),
> + PINCTRL_PIN(30, "PB14"),
> + PINCTRL_PIN(32, "PC0"),
> + PINCTRL_PIN(33, "PC1"),
> + PINCTRL_PIN(34, "PC2"),
> + PINCTRL_PIN(35, "PC3"),
> + PINCTRL_PIN(36, "PC4"),
> + PINCTRL_PIN(37, "PC5"),
> + PINCTRL_PIN(38, "PC6"),
> + PINCTRL_PIN(39, "PC7"),
> + PINCTRL_PIN(40, "PC8"),
> + PINCTRL_PIN(41, "PC9"),
> + PINCTRL_PIN(42, "PC10"),
> + PINCTRL_PIN(43, "PC11"),
> + PINCTRL_PIN(44, "PC12"),
> + PINCTRL_PIN(45, "PC13"),
> + PINCTRL_PIN(48, "PD0"),
> + PINCTRL_PIN(49, "PD1"),
> + PINCTRL_PIN(50, "PD2"),
> + PINCTRL_PIN(51, "PD3"),
> + PINCTRL_PIN(52, "PD4"),
> + PINCTRL_PIN(53, "PD5"),
> + PINCTRL_PIN(54, "PD6"),
> + PINCTRL_PIN(55, "PD7"),
> + PINCTRL_PIN(56, "PD8"),
> + PINCTRL_PIN(57, "PD9"),
> + PINCTRL_PIN(58, "PD10"),
> + PINCTRL_PIN(59, "PD11"),
> + PINCTRL_PIN(60, "PD12"),
> + PINCTRL_PIN(61, "PD13"),
> + PINCTRL_PIN(62, "PD14"),
> + PINCTRL_PIN(63, "PD15"),
> + PINCTRL_PIN(64, "PE0"),
> + PINCTRL_PIN(65, "PE1"),
> + PINCTRL_PIN(66, "PE2"),
> + PINCTRL_PIN(67, "PE3"),
> + PINCTRL_PIN(68, "PE4"),
> + PINCTRL_PIN(69, "PE5"),
> + PINCTRL_PIN(70, "PE6"),
> + PINCTRL_PIN(71, "PE7"),
> + PINCTRL_PIN(72, "PE8"),
> + PINCTRL_PIN(73, "PE9"),
> + PINCTRL_PIN(74, "PE10"),
> + PINCTRL_PIN(75, "PE11"),
> + PINCTRL_PIN(76, "PE12"),
> + PINCTRL_PIN(77, "PE13"),
> + PINCTRL_PIN(78, "PE14"),
> + PINCTRL_PIN(79, "PE15"),
> + PINCTRL_PIN(80, "PF0"),
> + PINCTRL_PIN(81, "PF1"),
> + PINCTRL_PIN(82, "PF2"),
> + PINCTRL_PIN(83, "PF3"),
> + PINCTRL_PIN(84, "PF4"),
> + PINCTRL_PIN(85, "PF5"),
> + PINCTRL_PIN(86, "PF6"),
> + PINCTRL_PIN(87, "PF7"),
> + PINCTRL_PIN(88, "PF8"),
> + PINCTRL_PIN(89, "PF9"),
> + PINCTRL_PIN(90, "PF10"),
> + PINCTRL_PIN(91, "PF11"),
> + PINCTRL_PIN(92, "PF12"),
> + PINCTRL_PIN(93, "PF13"),
> + PINCTRL_PIN(94, "PF14"),
> + PINCTRL_PIN(95, "PF15"),
> + PINCTRL_PIN(96, "PG0"),
> + PINCTRL_PIN(97, "PG1"),
> + PINCTRL_PIN(98, "PG2"),
> + PINCTRL_PIN(99, "PG3"),
> + PINCTRL_PIN(100, "PG4"),
> + PINCTRL_PIN(101, "PG5"),
> + PINCTRL_PIN(102, "PG6"),
> + PINCTRL_PIN(103, "PG7"),
> + PINCTRL_PIN(104, "PG8"),
> + PINCTRL_PIN(105, "PG9"),
> + PINCTRL_PIN(106, "PG10"),
> + PINCTRL_PIN(107, "PG11"),
> + PINCTRL_PIN(108, "PG12"),
> + PINCTRL_PIN(109, "PG13"),
> + PINCTRL_PIN(110, "PG14"),
> + PINCTRL_PIN(111, "PG15"),
> + PINCTRL_PIN(112, "PH0"),
> + PINCTRL_PIN(113, "PH1"),
> + PINCTRL_PIN(114, "PH2"),
> + PINCTRL_PIN(115, "PH3"),
> + PINCTRL_PIN(116, "PH4"),
> + PINCTRL_PIN(117, "PH5"),
> + PINCTRL_PIN(118, "PH6"),
> + PINCTRL_PIN(119, "PH7"),
> + PINCTRL_PIN(120, "PH8"),
> + PINCTRL_PIN(121, "PH9"),
> + PINCTRL_PIN(122, "PH10"),
> + PINCTRL_PIN(123, "PH11"),
> + PINCTRL_PIN(124, "PH12"),
> + PINCTRL_PIN(125, "PH13"),
> + PINCTRL_PIN(128, "PI0"),
> + PINCTRL_PIN(129, "PI1"),
> + PINCTRL_PIN(130, "PI2"),
> + PINCTRL_PIN(131, "PI3"),
> + PINCTRL_PIN(132, "PI4"),
> + PINCTRL_PIN(133, "PI5"),
> + PINCTRL_PIN(134, "PI6"),
> + PINCTRL_PIN(135, "PI7"),
> + PINCTRL_PIN(136, "PI8"),
> + PINCTRL_PIN(137, "PI9"),
> + PINCTRL_PIN(138, "PI10"),
> + PINCTRL_PIN(139, "PI11"),
> + PINCTRL_PIN(140, "PI12"),
> + PINCTRL_PIN(141, "PI13"),
> + PINCTRL_PIN(142, "PI14"),
> + PINCTRL_PIN(143, "PI15"),
> + PINCTRL_PIN(144, "PJ0"),
> + PINCTRL_PIN(145, "PJ1"),
> + PINCTRL_PIN(146, "PJ2"),
> + PINCTRL_PIN(147, "PJ3"),
> + PINCTRL_PIN(148, "PJ4"),
> + PINCTRL_PIN(149, "PJ5"),
> + PINCTRL_PIN(150, "PJ6"),
> + PINCTRL_PIN(151, "PJ7"),
> + PINCTRL_PIN(152, "PJ8"),
> + PINCTRL_PIN(153, "PJ9"),
> + PINCTRL_PIN(154, "PJ10"),
> + PINCTRL_PIN(155, "PJ11"),
> + PINCTRL_PIN(156, "PJ12"),
> + PINCTRL_PIN(157, "PJ13"),
> +};
> +
> +static const unsigned uart0_pins[] = {
> + GPIO_PE7, GPIO_PE8,
> +};
> +
> +static const unsigned uart1_pins[] = {
> + GPIO_PH0, GPIO_PH1,
> +};
> +
> +static const unsigned uart1_ctsrts_pins[] = {
> + GPIO_PE9, GPIO_PE10,
> +};
> +
> +static const unsigned uart2_pins[] = {
> + GPIO_PB4, GPIO_PB5,
> +};
> +
> +static const unsigned uart3_pins[] = {
> + GPIO_PB6, GPIO_PB7,
> +};
> +
> +static const unsigned uart3_ctsrts_pins[] = {
> + GPIO_PB2, GPIO_PB3,
> +};
> +
> +static const unsigned rsi0_pins[] = {
> + GPIO_PC8, GPIO_PC9, GPIO_PC10, GPIO_PC11, GPIO_PC12, GPIO_PC13,
> +};
> +
> +static const unsigned spi0_pins[] = {
> + GPIO_PE0, GPIO_PE1, GPIO_PE2,
> +};
> +
> +static const unsigned spi1_pins[] = {
> + GPIO_PG8, GPIO_PG9, GPIO_PG10,
> +};
> +
> +static const unsigned twi0_pins[] = {
> + GPIO_PE14, GPIO_PE15,
> +};
> +
> +static const unsigned twi1_pins[] = {
> + GPIO_PB0, GPIO_PB1,
> +};
> +
> +static const unsigned rotary_pins[] = {
> + GPIO_PH4, GPIO_PH3, GPIO_PH5,
> +};
> +
> +static const unsigned can0_pins[] = {
> + GPIO_PG13, GPIO_PG12,
> +};
> +
> +static const unsigned can1_pins[] = {
> + GPIO_PG14, GPIO_PG15,
> +};
> +
> +static const unsigned smc0_pins[] = {
> + GPIO_PH8, GPIO_PH9, GPIO_PH10, GPIO_PH11, GPIO_PH12, GPIO_PH13,
> + GPIO_PI0, GPIO_PI1, GPIO_PI2, GPIO_PI3, GPIO_PI4, GPIO_PI5, GPIO_PI6,
> + GPIO_PI7, GPIO_PI8, GPIO_PI9, GPIO_PI10, GPIO_PI11,
> + GPIO_PI12, GPIO_PI13, GPIO_PI14, GPIO_PI15,
> +};
> +
> +static const unsigned sport0_pins[] = {
> + GPIO_PC0, GPIO_PC2, GPIO_PC3, GPIO_PC4, GPIO_PC6, GPIO_PC7,
> +};
> +
> +static const unsigned sport1_pins[] = {
> + GPIO_PD0, GPIO_PD2, GPIO_PD3, GPIO_PD4, GPIO_PD6, GPIO_PD7,
> +};
> +
> +static const unsigned sport2_pins[] = {
> + GPIO_PA0, GPIO_PA2, GPIO_PA3, GPIO_PA4, GPIO_PA6, GPIO_PA7,
> +};
> +
> +static const unsigned sport3_pins[] = {
> + GPIO_PA8, GPIO_PA10, GPIO_PA11, GPIO_PA12, GPIO_PA14, GPIO_PA15,
> +};
> +
> +static const unsigned ppi0_8b_pins[] = {
> + GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
> + GPIO_PF7, GPIO_PF13, GPIO_PG0, GPIO_PG1, GPIO_PG2,
> +};
> +
> +static const unsigned ppi0_16b_pins[] = {
> + GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
> + GPIO_PF7, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
> + GPIO_PF13, GPIO_PF14, GPIO_PF15,
> + GPIO_PG0, GPIO_PG1, GPIO_PG2,
> +};
> +
> +static const unsigned ppi0_24b_pins[] = {
> + GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
> + GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
> + GPIO_PF13, GPIO_PF14, GPIO_PF15, GPIO_PD0, GPIO_PD1, GPIO_PD2,
> + GPIO_PD3, GPIO_PD4, GPIO_PD5, GPIO_PG3, GPIO_PG4,
> + GPIO_PG0, GPIO_PG1, GPIO_PG2,
> +};
> +
> +static const unsigned ppi1_8b_pins[] = {
> + GPIO_PD0, GPIO_PD1, GPIO_PD2, GPIO_PD3, GPIO_PD4, GPIO_PD5, GPIO_PD6,
> + GPIO_PD7, GPIO_PE11, GPIO_PE12, GPIO_PE13,
> +};
> +
> +static const unsigned ppi1_16b_pins[] = {
> + GPIO_PD0, GPIO_PD1, GPIO_PD2, GPIO_PD3, GPIO_PD4, GPIO_PD5, GPIO_PD6,
> + GPIO_PD7, GPIO_PD8, GPIO_PD9, GPIO_PD10, GPIO_PD11, GPIO_PD12,
> + GPIO_PD13, GPIO_PD14, GPIO_PD15,
> + GPIO_PE11, GPIO_PE12, GPIO_PE13,
> +};
> +
> +static const unsigned ppi2_8b_pins[] = {
> + GPIO_PD8, GPIO_PD9, GPIO_PD10, GPIO_PD11, GPIO_PD12,
> + GPIO_PD13, GPIO_PD14, GPIO_PD15,
> + GPIO_PA7, GPIO_PB0, GPIO_PB1, GPIO_PB2, GPIO_PB3,
> +};
> +
> +static const unsigned atapi_pins[] = {
> + GPIO_PH2, GPIO_PJ3, GPIO_PJ4, GPIO_PJ5, GPIO_PJ6,
> + GPIO_PJ7, GPIO_PJ8, GPIO_PJ9, GPIO_PJ10,
> +};
> +
> +static const unsigned atapi_alter_pins[] = {
> + GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
> + GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
> + GPIO_PF13, GPIO_PF14, GPIO_PF15, GPIO_PG2, GPIO_PG3, GPIO_PG4,
> +};
> +
> +static const unsigned nfc0_pins[] = {
> + GPIO_PJ1, GPIO_PJ2,
> +};
> +
> +static const unsigned keys_4x4_pins[] = {
> + GPIO_PD8, GPIO_PD9, GPIO_PD10, GPIO_PD11,
> + GPIO_PD12, GPIO_PD13, GPIO_PD14, GPIO_PD15,
> +};
> +
> +static const unsigned keys_8x8_pins[] = {
> + GPIO_PD8, GPIO_PD9, GPIO_PD10, GPIO_PD11,
> + GPIO_PD12, GPIO_PD13, GPIO_PD14, GPIO_PD15,
> + GPIO_PE0, GPIO_PE1, GPIO_PE2, GPIO_PE3,
> + GPIO_PE4, GPIO_PE5, GPIO_PE6, GPIO_PE7,
> +};
> +
> +static const struct adi_pin_group adi_pin_groups[] = {
> + ADI_PIN_GROUP("uart0grp", uart0_pins),
> + ADI_PIN_GROUP("uart1grp", uart1_pins),
> + ADI_PIN_GROUP("uart1ctsrtsgrp", uart1_ctsrts_pins),
> + ADI_PIN_GROUP("uart2grp", uart2_pins),
> + ADI_PIN_GROUP("uart3grp", uart3_pins),
> + ADI_PIN_GROUP("uart3ctsrtsgrp", uart3_ctsrts_pins),
> + ADI_PIN_GROUP("rsi0grp", rsi0_pins),
> + ADI_PIN_GROUP("spi0grp", spi0_pins),
> + ADI_PIN_GROUP("spi1grp", spi1_pins),
> + ADI_PIN_GROUP("twi0grp", twi0_pins),
> + ADI_PIN_GROUP("twi1grp", twi1_pins),
> + ADI_PIN_GROUP("rotarygrp", rotary_pins),
> + ADI_PIN_GROUP("can0grp", can0_pins),
> + ADI_PIN_GROUP("can1grp", can1_pins),
> + ADI_PIN_GROUP("smc0grp", smc0_pins),
> + ADI_PIN_GROUP("sport0grp", sport0_pins),
> + ADI_PIN_GROUP("sport1grp", sport1_pins),
> + ADI_PIN_GROUP("sport2grp", sport2_pins),
> + ADI_PIN_GROUP("sport3grp", sport3_pins),
> + ADI_PIN_GROUP("ppi0_8bgrp", ppi0_8b_pins),
> + ADI_PIN_GROUP("ppi0_16bgrp", ppi0_16b_pins),
> + ADI_PIN_GROUP("ppi0_24bgrp", ppi0_24b_pins),
> + ADI_PIN_GROUP("ppi1_8bgrp", ppi1_8b_pins),
> + ADI_PIN_GROUP("ppi1_16bgrp", ppi1_16b_pins),
> + ADI_PIN_GROUP("ppi2_8bgrp", ppi2_8b_pins),
> + ADI_PIN_GROUP("atapigrp", atapi_pins),
> + ADI_PIN_GROUP("atapialtergrp", atapi_alter_pins),
> + ADI_PIN_GROUP("nfc0grp", nfc0_pins),
> + ADI_PIN_GROUP("keys_4x4grp", keys_4x4_pins),
> + ADI_PIN_GROUP("keys_8x8grp", keys_8x8_pins),
> +};
> +
> +static const unsigned short uart0_mux[] = {
> + P_UART0_TX, P_UART0_RX,
> + 0
> +};
> +
> +static const unsigned short uart1_mux[] = {
> + P_UART1_TX, P_UART1_RX,
> + 0
> +};
> +
> +static const unsigned short uart1_ctsrts_mux[] = {
> + P_UART1_RTS, P_UART1_CTS,
> + 0
> +};
> +
> +static const unsigned short uart2_mux[] = {
> + P_UART2_TX, P_UART2_RX,
> + 0
> +};
> +
> +static const unsigned short uart3_mux[] = {
> + P_UART3_TX, P_UART3_RX,
> + 0
> +};
> +
> +static const unsigned short uart3_ctsrts_mux[] = {
> + P_UART3_RTS, P_UART3_CTS,
> + 0
> +};
> +
> +static const unsigned short rsi0_mux[] = {
> + P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD,
> + 0
> +};
> +
> +static const unsigned short spi0_mux[] = {
> + P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0
> +};
> +
> +static const unsigned short spi1_mux[] = {
> + P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0
> +};
> +
> +static const unsigned short twi0_mux[] = {
> + P_TWI0_SCL, P_TWI0_SDA, 0
> +};
> +
> +static const unsigned short twi1_mux[] = {
> + P_TWI1_SCL, P_TWI1_SDA, 0
> +};
> +
> +static const unsigned short rotary_mux[] = {
> + P_CNT_CUD, P_CNT_CDG, P_CNT_CZM, 0
> +};
> +
> +static const unsigned short sport0_mux[] = {
> + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
> + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
> +};
> +
> +static const unsigned short sport1_mux[] = {
> + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
> + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
> +};
> +
> +static const unsigned short sport2_mux[] = {
> + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
> + P_SPORT2_DRPRI, P_SPORT2_RSCLK, 0
> +};
> +
> +static const unsigned short sport3_mux[] = {
> + P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
> + P_SPORT3_DRPRI, P_SPORT3_RSCLK, 0
> +};
> +
> +static const unsigned short can0_mux[] = {
> + P_CAN0_RX, P_CAN0_TX, 0
> +};
> +
> +static const unsigned short can1_mux[] = {
> + P_CAN1_RX, P_CAN1_TX, 0
> +};
> +
> +static const unsigned short smc0_mux[] = {
> + P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
> + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
> + P_A22, P_A23, P_A24, P_A25, P_NOR_CLK, 0,
> +};
> +
> +static const unsigned short ppi0_8b_mux[] = {
> + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
> + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
> + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi0_16b_mux[] = {
> + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
> + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
> + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
> + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
> + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi0_24b_mux[] = {
> + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
> + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
> + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
> + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
> + P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
> + P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
> + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi1_8b_mux[] = {
> + P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
> + P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
> + P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi1_16b_mux[] = {
> + P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
> + P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
> + P_PPI1_D8, P_PPI1_D9, P_PPI1_D10, P_PPI1_D11,
> + P_PPI1_D12, P_PPI1_D13, P_PPI1_D14, P_PPI1_D15,
> + P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi2_8b_mux[] = {
> + P_PPI2_D0, P_PPI2_D1, P_PPI2_D2, P_PPI2_D3,
> + P_PPI2_D4, P_PPI2_D5, P_PPI2_D6, P_PPI2_D7,
> + P_PPI2_CLK, P_PPI2_FS1, P_PPI2_FS2,
> + 0,
> +};
> +
> +static const unsigned short atapi_mux[] = {
> + P_ATAPI_RESET, P_ATAPI_DIOR, P_ATAPI_DIOW, P_ATAPI_CS0, P_ATAPI_CS1,
> + P_ATAPI_DMACK, P_ATAPI_DMARQ, P_ATAPI_INTRQ, P_ATAPI_IORDY,
> +};
> +
> +static const unsigned short atapi_alter_mux[] = {
> + P_ATAPI_D0A, P_ATAPI_D1A, P_ATAPI_D2A, P_ATAPI_D3A, P_ATAPI_D4A,
> + P_ATAPI_D5A, P_ATAPI_D6A, P_ATAPI_D7A, P_ATAPI_D8A, P_ATAPI_D9A,
> + P_ATAPI_D10A, P_ATAPI_D11A, P_ATAPI_D12A, P_ATAPI_D13A, P_ATAPI_D14A,
> + P_ATAPI_D15A, P_ATAPI_A0A, P_ATAPI_A1A, P_ATAPI_A2A,
> + 0
> +};
> +
> +static const unsigned short nfc0_mux[] = {
> + P_NAND_CE, P_NAND_RB,
> + 0
> +};
> +
> +static const unsigned short keys_4x4_mux[] = {
> + P_KEY_ROW3, P_KEY_ROW2, P_KEY_ROW1, P_KEY_ROW0,
> + P_KEY_COL3, P_KEY_COL2, P_KEY_COL1, P_KEY_COL0,
> + 0
> +};
> +
> +static const unsigned short keys_8x8_mux[] = {
> + P_KEY_ROW7, P_KEY_ROW6, P_KEY_ROW5, P_KEY_ROW4,
> + P_KEY_ROW3, P_KEY_ROW2, P_KEY_ROW1, P_KEY_ROW0,
> + P_KEY_COL7, P_KEY_COL6, P_KEY_COL5, P_KEY_COL4,
> + P_KEY_COL3, P_KEY_COL2, P_KEY_COL1, P_KEY_COL0,
> + 0
> +};
> +
> +static const char * const uart0grp[] = { "uart0grp" };
> +static const char * const uart1grp[] = { "uart1grp" };
> +static const char * const uart1ctsrtsgrp[] = { "uart1ctsrtsgrp" };
> +static const char * const uart2grp[] = { "uart2grp" };
> +static const char * const uart3grp[] = { "uart3grp" };
> +static const char * const uart3ctsrtsgrp[] = { "uart3ctsrtsgrp" };
> +static const char * const rsi0grp[] = { "rsi0grp" };
> +static const char * const spi0grp[] = { "spi0grp" };
> +static const char * const spi1grp[] = { "spi1grp" };
> +static const char * const twi0grp[] = { "twi0grp" };
> +static const char * const twi1grp[] = { "twi1grp" };
> +static const char * const rotarygrp[] = { "rotarygrp" };
> +static const char * const can0grp[] = { "can0grp" };
> +static const char * const can1grp[] = { "can1grp" };
> +static const char * const smc0grp[] = { "smc0grp" };
> +static const char * const sport0grp[] = { "sport0grp" };
> +static const char * const sport1grp[] = { "sport1grp" };
> +static const char * const sport2grp[] = { "sport2grp" };
> +static const char * const sport3grp[] = { "sport3grp" };
> +static const char * const ppi0_8bgrp[] = { "ppi0_8bgrp" };
> +static const char * const ppi0_16bgrp[] = { "ppi0_16bgrp" };
> +static const char * const ppi0_24bgrp[] = { "ppi0_24bgrp" };
> +static const char * const ppi1_8bgrp[] = { "ppi1_8bgrp" };
> +static const char * const ppi1_16bgrp[] = { "ppi1_16bgrp" };
> +static const char * const ppi2_8bgrp[] = { "ppi2_8bgrp" };
> +static const char * const atapigrp[] = { "atapigrp" };
> +static const char * const atapialtergrp[] = { "atapialtergrp" };
> +static const char * const nfc0grp[] = { "nfc0grp" };
> +static const char * const keys_4x4grp[] = { "keys_4x4grp" };
> +static const char * const keys_8x8grp[] = { "keys_8x8grp" };
> +
> +static const struct adi_pmx_func adi_pmx_functions[] = {
> + ADI_PMX_FUNCTION("uart0", uart0grp, uart0_mux),
> + ADI_PMX_FUNCTION("uart1", uart1grp, uart1_mux),
> + ADI_PMX_FUNCTION("uart1_ctsrts", uart1ctsrtsgrp, uart1_ctsrts_mux),
> + ADI_PMX_FUNCTION("uart2", uart2grp, uart2_mux),
> + ADI_PMX_FUNCTION("uart3", uart3grp, uart3_mux),
> + ADI_PMX_FUNCTION("uart3_ctsrts", uart3ctsrtsgrp, uart3_ctsrts_mux),
> + ADI_PMX_FUNCTION("rsi0", rsi0grp, rsi0_mux),
> + ADI_PMX_FUNCTION("spi0", spi0grp, spi0_mux),
> + ADI_PMX_FUNCTION("spi1", spi1grp, spi1_mux),
> + ADI_PMX_FUNCTION("twi0", twi0grp, twi0_mux),
> + ADI_PMX_FUNCTION("twi1", twi1grp, twi1_mux),
> + ADI_PMX_FUNCTION("rotary", rotarygrp, rotary_mux),
> + ADI_PMX_FUNCTION("can0", can0grp, can0_mux),
> + ADI_PMX_FUNCTION("can1", can1grp, can1_mux),
> + ADI_PMX_FUNCTION("smc0", smc0grp, smc0_mux),
> + ADI_PMX_FUNCTION("sport0", sport0grp, sport0_mux),
> + ADI_PMX_FUNCTION("sport1", sport1grp, sport1_mux),
> + ADI_PMX_FUNCTION("sport2", sport2grp, sport2_mux),
> + ADI_PMX_FUNCTION("sport3", sport3grp, sport3_mux),
> + ADI_PMX_FUNCTION("ppi0_8b", ppi0_8bgrp, ppi0_8b_mux),
> + ADI_PMX_FUNCTION("ppi0_16b", ppi0_16bgrp, ppi0_16b_mux),
> + ADI_PMX_FUNCTION("ppi0_24b", ppi0_24bgrp, ppi0_24b_mux),
> + ADI_PMX_FUNCTION("ppi1_8b", ppi1_8bgrp, ppi1_8b_mux),
> + ADI_PMX_FUNCTION("ppi1_16b", ppi1_16bgrp, ppi1_16b_mux),
> + ADI_PMX_FUNCTION("ppi2_8b", ppi2_8bgrp, ppi2_8b_mux),
> + ADI_PMX_FUNCTION("atapi", atapigrp, atapi_mux),
> + ADI_PMX_FUNCTION("atapi_alter", atapialtergrp, atapi_alter_mux),
> + ADI_PMX_FUNCTION("nfc0", nfc0grp, nfc0_mux),
> + ADI_PMX_FUNCTION("keys_4x4", keys_4x4grp, keys_4x4_mux),
> + ADI_PMX_FUNCTION("keys_8x8", keys_8x8grp, keys_8x8_mux),
> +};
> +
> +static const struct adi_pinctrl_soc_data adi_bf54x_soc = {
> + .functions = adi_pmx_functions,
> + .nfunctions = ARRAY_SIZE(adi_pmx_functions),
> + .groups = adi_pin_groups,
> + .ngroups = ARRAY_SIZE(adi_pin_groups),
> + .pins = adi_pads,
> + .npins = ARRAY_SIZE(adi_pads),
> +};
> +
> +void adi_pinctrl_soc_init(const struct adi_pinctrl_soc_data **soc)
> +{
> + *soc = &adi_bf54x_soc;
> +}
> diff --git a/drivers/pinctrl/pinctrl-adi2-bf60x.c b/drivers/pinctrl/pinctrl-adi2-bf60x.c
> new file mode 100644
> index 0000000..e90cb80
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-adi2-bf60x.c
> @@ -0,0 +1,522 @@
> +/*
> + * Pinctrl Driver for ADI GPIO2 controller
> + *
> + * Copyright 2007-2013 Analog Devices Inc.
> + *
> + * Licensed under the GPLv2 or later
> + */
> +
> +#include <asm/portmux.h>
> +#include "pinctrl-adi2.h"
> +
> +static const struct pinctrl_pin_desc adi_pads[] = {
> + PINCTRL_PIN(0, "PA0"),
> + PINCTRL_PIN(1, "PA1"),
> + PINCTRL_PIN(2, "PA2"),
> + PINCTRL_PIN(3, "PG3"),
> + PINCTRL_PIN(4, "PA4"),
> + PINCTRL_PIN(5, "PA5"),
> + PINCTRL_PIN(6, "PA6"),
> + PINCTRL_PIN(7, "PA7"),
> + PINCTRL_PIN(8, "PA8"),
> + PINCTRL_PIN(9, "PA9"),
> + PINCTRL_PIN(10, "PA10"),
> + PINCTRL_PIN(11, "PA11"),
> + PINCTRL_PIN(12, "PA12"),
> + PINCTRL_PIN(13, "PA13"),
> + PINCTRL_PIN(14, "PA14"),
> + PINCTRL_PIN(15, "PA15"),
> + PINCTRL_PIN(16, "PB0"),
> + PINCTRL_PIN(17, "PB1"),
> + PINCTRL_PIN(18, "PB2"),
> + PINCTRL_PIN(19, "PB3"),
> + PINCTRL_PIN(20, "PB4"),
> + PINCTRL_PIN(21, "PB5"),
> + PINCTRL_PIN(22, "PB6"),
> + PINCTRL_PIN(23, "PB7"),
> + PINCTRL_PIN(24, "PB8"),
> + PINCTRL_PIN(25, "PB9"),
> + PINCTRL_PIN(26, "PB10"),
> + PINCTRL_PIN(27, "PB11"),
> + PINCTRL_PIN(28, "PB12"),
> + PINCTRL_PIN(29, "PB13"),
> + PINCTRL_PIN(30, "PB14"),
> + PINCTRL_PIN(31, "PB15"),
> + PINCTRL_PIN(32, "PC0"),
> + PINCTRL_PIN(33, "PC1"),
> + PINCTRL_PIN(34, "PC2"),
> + PINCTRL_PIN(35, "PC3"),
> + PINCTRL_PIN(36, "PC4"),
> + PINCTRL_PIN(37, "PC5"),
> + PINCTRL_PIN(38, "PC6"),
> + PINCTRL_PIN(39, "PC7"),
> + PINCTRL_PIN(40, "PC8"),
> + PINCTRL_PIN(41, "PC9"),
> + PINCTRL_PIN(42, "PC10"),
> + PINCTRL_PIN(43, "PC11"),
> + PINCTRL_PIN(44, "PC12"),
> + PINCTRL_PIN(45, "PC13"),
> + PINCTRL_PIN(46, "PC14"),
> + PINCTRL_PIN(47, "PC15"),
> + PINCTRL_PIN(48, "PD0"),
> + PINCTRL_PIN(49, "PD1"),
> + PINCTRL_PIN(50, "PD2"),
> + PINCTRL_PIN(51, "PD3"),
> + PINCTRL_PIN(52, "PD4"),
> + PINCTRL_PIN(53, "PD5"),
> + PINCTRL_PIN(54, "PD6"),
> + PINCTRL_PIN(55, "PD7"),
> + PINCTRL_PIN(56, "PD8"),
> + PINCTRL_PIN(57, "PD9"),
> + PINCTRL_PIN(58, "PD10"),
> + PINCTRL_PIN(59, "PD11"),
> + PINCTRL_PIN(60, "PD12"),
> + PINCTRL_PIN(61, "PD13"),
> + PINCTRL_PIN(62, "PD14"),
> + PINCTRL_PIN(63, "PD15"),
> + PINCTRL_PIN(64, "PE0"),
> + PINCTRL_PIN(65, "PE1"),
> + PINCTRL_PIN(66, "PE2"),
> + PINCTRL_PIN(67, "PE3"),
> + PINCTRL_PIN(68, "PE4"),
> + PINCTRL_PIN(69, "PE5"),
> + PINCTRL_PIN(70, "PE6"),
> + PINCTRL_PIN(71, "PE7"),
> + PINCTRL_PIN(72, "PE8"),
> + PINCTRL_PIN(73, "PE9"),
> + PINCTRL_PIN(74, "PE10"),
> + PINCTRL_PIN(75, "PE11"),
> + PINCTRL_PIN(76, "PE12"),
> + PINCTRL_PIN(77, "PE13"),
> + PINCTRL_PIN(78, "PE14"),
> + PINCTRL_PIN(79, "PE15"),
> + PINCTRL_PIN(80, "PF0"),
> + PINCTRL_PIN(81, "PF1"),
> + PINCTRL_PIN(82, "PF2"),
> + PINCTRL_PIN(83, "PF3"),
> + PINCTRL_PIN(84, "PF4"),
> + PINCTRL_PIN(85, "PF5"),
> + PINCTRL_PIN(86, "PF6"),
> + PINCTRL_PIN(87, "PF7"),
> + PINCTRL_PIN(88, "PF8"),
> + PINCTRL_PIN(89, "PF9"),
> + PINCTRL_PIN(90, "PF10"),
> + PINCTRL_PIN(91, "PF11"),
> + PINCTRL_PIN(92, "PF12"),
> + PINCTRL_PIN(93, "PF13"),
> + PINCTRL_PIN(94, "PF14"),
> + PINCTRL_PIN(95, "PF15"),
> + PINCTRL_PIN(96, "PG0"),
> + PINCTRL_PIN(97, "PG1"),
> + PINCTRL_PIN(98, "PG2"),
> + PINCTRL_PIN(99, "PG3"),
> + PINCTRL_PIN(100, "PG4"),
> + PINCTRL_PIN(101, "PG5"),
> + PINCTRL_PIN(102, "PG6"),
> + PINCTRL_PIN(103, "PG7"),
> + PINCTRL_PIN(104, "PG8"),
> + PINCTRL_PIN(105, "PG9"),
> + PINCTRL_PIN(106, "PG10"),
> + PINCTRL_PIN(107, "PG11"),
> + PINCTRL_PIN(108, "PG12"),
> + PINCTRL_PIN(109, "PG13"),
> + PINCTRL_PIN(110, "PG14"),
> + PINCTRL_PIN(111, "PG15"),
> +};
> +
> +static const unsigned uart0_pins[] = {
> + GPIO_PD7, GPIO_PD8,
> +};
> +
> +static const unsigned uart0_ctsrts_pins[] = {
> + GPIO_PD9, GPIO_PD10,
> +};
> +
> +static const unsigned uart1_pins[] = {
> + GPIO_PG15, GPIO_PG14,
> +};
> +
> +static const unsigned uart1_ctsrts_pins[] = {
> + GPIO_PG10, GPIO_PG13,
> +};
> +
> +static const unsigned rsi0_pins[] = {
> + GPIO_PG3, GPIO_PG2, GPIO_PG0, GPIO_PE15, GPIO_PG5, GPIO_PG6,
> +};
> +
> +static const unsigned eth0_pins[] = {
> + GPIO_PC6, GPIO_PC7, GPIO_PC2, GPIO_PC0, GPIO_PC3, GPIO_PC1,
> + GPIO_PB13, GPIO_PD6, GPIO_PC5, GPIO_PC4, GPIO_PB14, GPIO_PB15,
> +};
> +
> +static const unsigned eth1_pins[] = {
> + GPIO_PE10, GPIO_PE11, GPIO_PG3, GPIO_PG0, GPIO_PG2, GPIO_PE15,
> + GPIO_PG5, GPIO_PE12, GPIO_PE13, GPIO_PE14, GPIO_PG6, GPIO_PC9,
> +};
> +
> +static const unsigned spi0_pins[] = {
> + GPIO_PD4, GPIO_PD2, GPIO_PD3,
> +};
> +
> +static const unsigned spi1_pins[] = {
> + GPIO_PD5, GPIO_PD14, GPIO_PD13,
> +};
> +
> +static const unsigned twi0_pins[] = {
> +};
> +
> +static const unsigned twi1_pins[] = {
> +};
> +
> +static const unsigned rotary_pins[] = {
> + GPIO_PG7, GPIO_PG11, GPIO_PG12,
> +};
> +
> +static const unsigned can0_pins[] = {
> + GPIO_PG1, GPIO_PG4,
> +};
> +
> +static const unsigned smc0_pins[] = {
> + GPIO_PA0, GPIO_PA1, GPIO_PA2, GPIO_PA3, GPIO_PA4, GPIO_PA5, GPIO_PA6,
> + GPIO_PA7, GPIO_PA8, GPIO_PA9, GPIO_PB2, GPIO_PA10, GPIO_PA11,
> + GPIO_PB3, GPIO_PA12, GPIO_PA13, GPIO_PA14, GPIO_PA15, GPIO_PB6,
> + GPIO_PB7, GPIO_PB8, GPIO_PB10, GPIO_PB11, GPIO_PB0,
> +};
> +
> +static const unsigned sport0_pins[] = {
> + GPIO_PB5, GPIO_PB4, GPIO_PB9, GPIO_PB8, GPIO_PB7, GPIO_PB11,
> +};
> +
> +static const unsigned sport1_pins[] = {
> + GPIO_PE2, GPIO_PE5, GPIO_PD15, GPIO_PE4, GPIO_PE3, GPIO_PE1,
> +};
> +
> +static const unsigned sport2_pins[] = {
> + GPIO_PG4, GPIO_PG1, GPIO_PG9, GPIO_PG10, GPIO_PG7, GPIO_PB12,
> +};
> +
> +static const unsigned ppi0_8b_pins[] = {
> + GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
> + GPIO_PF7, GPIO_PF13, GPIO_PF14, GPIO_PF15,
> + GPIO_PE6, GPIO_PE7, GPIO_PE8, GPIO_PE9,
> +};
> +
> +static const unsigned ppi0_16b_pins[] = {
> + GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
> + GPIO_PF7, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
> + GPIO_PF13, GPIO_PF14, GPIO_PF15,
> + GPIO_PE6, GPIO_PE7, GPIO_PE8, GPIO_PE9,
> +};
> +
> +static const unsigned ppi0_24b_pins[] = {
> + GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3, GPIO_PF4, GPIO_PF5, GPIO_PF6,
> + GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, GPIO_PF12,
> + GPIO_PF13, GPIO_PF14, GPIO_PF15, GPIO_PE0, GPIO_PE1, GPIO_PE2,
> + GPIO_PE3, GPIO_PE4, GPIO_PE5, GPIO_PE6, GPIO_PE7, GPIO_PE8,
> + GPIO_PE9, GPIO_PD12, GPIO_PD15,
> +};
> +
> +static const unsigned ppi1_8b_pins[] = {
> + GPIO_PC0, GPIO_PC1, GPIO_PC2, GPIO_PC3, GPIO_PC4, GPIO_PC5, GPIO_PC6,
> + GPIO_PC7, GPIO_PC8, GPIO_PB13, GPIO_PB14, GPIO_PB15, GPIO_PD6,
> +};
> +
> +static const unsigned ppi1_16b_pins[] = {
> + GPIO_PC0, GPIO_PC1, GPIO_PC2, GPIO_PC3, GPIO_PC4, GPIO_PC5, GPIO_PC6,
> + GPIO_PC7, GPIO_PC9, GPIO_PC10, GPIO_PC11, GPIO_PC12,
> + GPIO_PC13, GPIO_PC14, GPIO_PC15,
> + GPIO_PB13, GPIO_PB14, GPIO_PB15, GPIO_PD6,
> +};
> +
> +static const unsigned ppi2_8b_pins[] = {
> + GPIO_PA0, GPIO_PA1, GPIO_PA2, GPIO_PA3, GPIO_PA4, GPIO_PA5, GPIO_PA6,
> + GPIO_PA7, GPIO_PB0, GPIO_PB1, GPIO_PB2, GPIO_PB3,
> +};
> +
> +static const unsigned ppi2_16b_pins[] = {
> + GPIO_PA0, GPIO_PA1, GPIO_PA2, GPIO_PA3, GPIO_PA4, GPIO_PA5, GPIO_PA6,
> + GPIO_PA7, GPIO_PA8, GPIO_PA9, GPIO_PA10, GPIO_PA11, GPIO_PA12,
> + GPIO_PA13, GPIO_PA14, GPIO_PA15,
> + GPIO_PA7, GPIO_PB0, GPIO_PB1, GPIO_PB2, GPIO_PB3,
> +};
> +
> +static const unsigned lp0_pins[] = {
> + GPIO_PB0, GPIO_PB1, GPIO_PA0, GPIO_PA1, GPIO_PA2, GPIO_PA3,
> + GPIO_PA4, GPIO_PA5, GPIO_PA6, GPIO_PA7,
> +};
> +
> +static const unsigned lp1_pins[] = {
> + GPIO_PB3, GPIO_PB2, GPIO_PA8, GPIO_PA9, GPIO_PA10, GPIO_PA11,
> + GPIO_PA12, GPIO_PA13, GPIO_PA14, GPIO_PA15,
> +};
> +
> +static const unsigned lp2_pins[] = {
> + GPIO_PE6, GPIO_PE7, GPIO_PF0, GPIO_PF1, GPIO_PF2, GPIO_PF3,
> + GPIO_PF4, GPIO_PF5, GPIO_PF6, GPIO_PF7,
> +};
> +
> +static const unsigned lp3_pins[] = {
> + GPIO_PE9, GPIO_PE8, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
> + GPIO_PF12, GPIO_PF13, GPIO_PF14, GPIO_PF15,
> +};
> +
> +static const struct adi_pin_group adi_pin_groups[] = {
> + ADI_PIN_GROUP("uart0grp", uart0_pins),
> + ADI_PIN_GROUP("uart0ctsrtsgrp", uart0_ctsrts_pins),
> + ADI_PIN_GROUP("uart1grp", uart1_pins),
> + ADI_PIN_GROUP("uart1ctsrtsgrp", uart1_ctsrts_pins),
> + ADI_PIN_GROUP("rsi0grp", rsi0_pins),
> + ADI_PIN_GROUP("eth0grp", eth0_pins),
> + ADI_PIN_GROUP("eth1grp", eth1_pins),
> + ADI_PIN_GROUP("spi0grp", spi0_pins),
> + ADI_PIN_GROUP("spi1grp", spi1_pins),
> + ADI_PIN_GROUP("twi0grp", twi0_pins),
> + ADI_PIN_GROUP("twi1grp", twi1_pins),
> + ADI_PIN_GROUP("rotarygrp", rotary_pins),
> + ADI_PIN_GROUP("can0grp", can0_pins),
> + ADI_PIN_GROUP("smc0grp", smc0_pins),
> + ADI_PIN_GROUP("sport0grp", sport0_pins),
> + ADI_PIN_GROUP("sport1grp", sport1_pins),
> + ADI_PIN_GROUP("sport2grp", sport2_pins),
> + ADI_PIN_GROUP("ppi0_8bgrp", ppi0_8b_pins),
> + ADI_PIN_GROUP("ppi0_16bgrp", ppi0_16b_pins),
> + ADI_PIN_GROUP("ppi0_24bgrp", ppi0_24b_pins),
> + ADI_PIN_GROUP("ppi1_8bgrp", ppi1_8b_pins),
> + ADI_PIN_GROUP("ppi1_16bgrp", ppi1_16b_pins),
> + ADI_PIN_GROUP("ppi2_8bgrp", ppi2_8b_pins),
> + ADI_PIN_GROUP("ppi2_16bgrp", ppi2_16b_pins),
> + ADI_PIN_GROUP("lp0grp", lp0_pins),
> + ADI_PIN_GROUP("lp1grp", lp1_pins),
> + ADI_PIN_GROUP("lp2grp", lp2_pins),
> + ADI_PIN_GROUP("lp3grp", lp3_pins),
> +};
> +
> +static const unsigned short uart0_mux[] = {
> + P_UART0_TX, P_UART0_RX,
> + 0
> +};
> +
> +static const unsigned short uart0_ctsrts_mux[] = {
> + P_UART0_RTS, P_UART0_CTS,
> + 0
> +};
> +
> +static const unsigned short uart1_mux[] = {
> + P_UART1_TX, P_UART1_RX,
> + 0
> +};
> +
> +static const unsigned short uart1_ctsrts_mux[] = {
> + P_UART1_RTS, P_UART1_CTS,
> + 0
> +};
> +
> +static const unsigned short rsi0_mux[] = {
> + P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3,
> + P_RSI_CMD, P_RSI_CLK, 0
> +};
> +
> +static const unsigned short eth0_mux[] = P_RMII0;
> +static const unsigned short eth1_mux[] = P_RMII1;
> +
> +static const unsigned short spi0_mux[] = {
> + P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0
> +};
> +
> +static const unsigned short spi1_mux[] = {
> + P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0
> +};
> +
> +static const unsigned short twi0_mux[] = {
> + P_TWI0_SCL, P_TWI0_SDA, 0
> +};
> +
> +static const unsigned short twi1_mux[] = {
> + P_TWI1_SCL, P_TWI1_SDA, 0
> +};
> +
> +static const unsigned short rotary_mux[] = {
> + P_CNT_CUD, P_CNT_CDG, P_CNT_CZM, 0
> +};
> +
> +static const unsigned short sport0_mux[] = {
> + P_SPORT0_ACLK, P_SPORT0_AFS, P_SPORT0_AD0, P_SPORT0_BCLK,
> + P_SPORT0_BFS, P_SPORT0_BD0, 0,
> +};
> +
> +static const unsigned short sport1_mux[] = {
> + P_SPORT1_ACLK, P_SPORT1_AFS, P_SPORT1_AD0, P_SPORT1_BCLK,
> + P_SPORT1_BFS, P_SPORT1_BD0, 0,
> +};
> +
> +static const unsigned short sport2_mux[] = {
> + P_SPORT2_ACLK, P_SPORT2_AFS, P_SPORT2_AD0, P_SPORT2_BCLK,
> + P_SPORT2_BFS, P_SPORT2_BD0, 0,
> +};
> +
> +static const unsigned short can0_mux[] = {
> + P_CAN0_RX, P_CAN0_TX, 0
> +};
> +
> +static const unsigned short smc0_mux[] = {
> + P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
> + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
> + P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
> +};
> +
> +static const unsigned short ppi0_8b_mux[] = {
> + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
> + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
> + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi0_16b_mux[] = {
> + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
> + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
> + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
> + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
> + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi0_24b_mux[] = {
> + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
> + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
> + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
> + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
> + P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
> + P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
> + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi1_8b_mux[] = {
> + P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
> + P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
> + P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi1_16b_mux[] = {
> + P_PPI1_D0, P_PPI1_D1, P_PPI1_D2, P_PPI1_D3,
> + P_PPI1_D4, P_PPI1_D5, P_PPI1_D6, P_PPI1_D7,
> + P_PPI1_D8, P_PPI1_D9, P_PPI1_D10, P_PPI1_D11,
> + P_PPI1_D12, P_PPI1_D13, P_PPI1_D14, P_PPI1_D15,
> + P_PPI1_CLK, P_PPI1_FS1, P_PPI1_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi2_8b_mux[] = {
> + P_PPI2_D0, P_PPI2_D1, P_PPI2_D2, P_PPI2_D3,
> + P_PPI2_D4, P_PPI2_D5, P_PPI2_D6, P_PPI2_D7,
> + P_PPI2_CLK, P_PPI2_FS1, P_PPI2_FS2,
> + 0,
> +};
> +
> +static const unsigned short ppi2_16b_mux[] = {
> + P_PPI2_D0, P_PPI2_D1, P_PPI2_D2, P_PPI2_D3,
> + P_PPI2_D4, P_PPI2_D5, P_PPI2_D6, P_PPI2_D7,
> + P_PPI2_D8, P_PPI2_D9, P_PPI2_D10, P_PPI2_D11,
> + P_PPI2_D12, P_PPI2_D13, P_PPI2_D14, P_PPI2_D15,
> + P_PPI2_CLK, P_PPI2_FS1, P_PPI2_FS2,
> + 0,
> +};
> +
> +static const unsigned short lp0_mux[] = {
> + P_LP0_CLK, P_LP0_ACK, P_LP0_D0, P_LP0_D1, P_LP0_D2,
> + P_LP0_D3, P_LP0_D4, P_LP0_D5, P_LP0_D6, P_LP0_D7,
> + 0
> +};
> +
> +static const unsigned short lp1_mux[] = {
> + P_LP1_CLK, P_LP1_ACK, P_LP1_D0, P_LP1_D1, P_LP1_D2,
> + P_LP1_D3, P_LP1_D4, P_LP1_D5, P_LP1_D6, P_LP1_D7,
> + 0
> +};
> +
> +static const unsigned short lp2_mux[] = {
> + P_LP2_CLK, P_LP2_ACK, P_LP2_D0, P_LP2_D1, P_LP2_D2,
> + P_LP2_D3, P_LP2_D4, P_LP2_D5, P_LP2_D6, P_LP2_D7,
> + 0
> +};
> +
> +static const unsigned short lp3_mux[] = {
> + P_LP3_CLK, P_LP3_ACK, P_LP3_D0, P_LP3_D1, P_LP3_D2,
> + P_LP3_D3, P_LP3_D4, P_LP3_D5, P_LP3_D6, P_LP3_D7,
> + 0
> +};
> +
> +static const char * const uart0grp[] = { "uart0grp" };
> +static const char * const uart0ctsrtsgrp[] = { "uart0ctsrtsgrp" };
> +static const char * const uart1grp[] = { "uart1grp" };
> +static const char * const uart1ctsrtsgrp[] = { "uart1ctsrtsgrp" };
> +static const char * const rsi0grp[] = { "rsi0grp" };
> +static const char * const eth0grp[] = { "eth0grp" };
> +static const char * const eth1grp[] = { "eth1grp" };
> +static const char * const spi0grp[] = { "spi0grp" };
> +static const char * const spi1grp[] = { "spi1grp" };
> +static const char * const twi0grp[] = { "twi0grp" };
> +static const char * const twi1grp[] = { "twi1grp" };
> +static const char * const rotarygrp[] = { "rotarygrp" };
> +static const char * const can0grp[] = { "can0grp" };
> +static const char * const smc0grp[] = { "smc0grp" };
> +static const char * const sport0grp[] = { "sport0grp" };
> +static const char * const sport1grp[] = { "sport1grp" };
> +static const char * const sport2grp[] = { "sport2grp" };
> +static const char * const ppi0_8bgrp[] = { "ppi0_8bgrp" };
> +static const char * const ppi0_16bgrp[] = { "ppi0_16bgrp" };
> +static const char * const ppi0_24bgrp[] = { "ppi0_24bgrp" };
> +static const char * const ppi1_8bgrp[] = { "ppi1_8bgrp" };
> +static const char * const ppi1_16bgrp[] = { "ppi1_16bgrp" };
> +static const char * const ppi2_8bgrp[] = { "ppi2_8bgrp" };
> +static const char * const ppi2_16bgrp[] = { "ppi2_16bgrp" };
> +static const char * const lp0grp[] = { "lp0grp" };
> +static const char * const lp1grp[] = { "lp1grp" };
> +static const char * const lp2grp[] = { "lp2grp" };
> +static const char * const lp3grp[] = { "lp3grp" };
> +
> +static const struct adi_pmx_func adi_pmx_functions[] = {
> + ADI_PMX_FUNCTION("uart0", uart0grp, uart0_mux),
> + ADI_PMX_FUNCTION("uart0_ctsrts", uart0ctsrtsgrp, uart0_ctsrts_mux),
> + ADI_PMX_FUNCTION("uart1", uart1grp, uart1_mux),
> + ADI_PMX_FUNCTION("uart1_ctsrts", uart1ctsrtsgrp, uart1_ctsrts_mux),
> + ADI_PMX_FUNCTION("rsi0", rsi0grp, rsi0_mux),
> + ADI_PMX_FUNCTION("eth0", eth0grp, eth0_mux),
> + ADI_PMX_FUNCTION("eth1", eth1grp, eth1_mux),
> + ADI_PMX_FUNCTION("spi0", spi0grp, spi0_mux),
> + ADI_PMX_FUNCTION("spi1", spi1grp, spi1_mux),
> + ADI_PMX_FUNCTION("twi0", twi0grp, twi0_mux),
> + ADI_PMX_FUNCTION("twi1", twi1grp, twi1_mux),
> + ADI_PMX_FUNCTION("rotary", rotarygrp, rotary_mux),
> + ADI_PMX_FUNCTION("can0", can0grp, can0_mux),
> + ADI_PMX_FUNCTION("smc0", smc0grp, smc0_mux),
> + ADI_PMX_FUNCTION("sport0", sport0grp, sport0_mux),
> + ADI_PMX_FUNCTION("sport1", sport1grp, sport1_mux),
> + ADI_PMX_FUNCTION("sport2", sport2grp, sport2_mux),
> + ADI_PMX_FUNCTION("ppi0_8b", ppi0_8bgrp, ppi0_8b_mux),
> + ADI_PMX_FUNCTION("ppi0_16b", ppi0_16bgrp, ppi0_16b_mux),
> + ADI_PMX_FUNCTION("ppi0_24b", ppi0_24bgrp, ppi0_24b_mux),
> + ADI_PMX_FUNCTION("ppi1_8b", ppi1_8bgrp, ppi1_8b_mux),
> + ADI_PMX_FUNCTION("ppi1_16b", ppi1_16bgrp, ppi1_16b_mux),
> + ADI_PMX_FUNCTION("ppi2_8b", ppi2_8bgrp, ppi2_8b_mux),
> + ADI_PMX_FUNCTION("ppi2_16b", ppi2_16bgrp, ppi2_16b_mux),
> + ADI_PMX_FUNCTION("lp0", lp0grp, lp0_mux),
> + ADI_PMX_FUNCTION("lp1", lp1grp, lp1_mux),
> + ADI_PMX_FUNCTION("lp2", lp2grp, lp2_mux),
> + ADI_PMX_FUNCTION("lp3", lp3grp, lp3_mux),
> +};
> +
> +static const struct adi_pinctrl_soc_data adi_bf60x_soc = {
> + .functions = adi_pmx_functions,
> + .nfunctions = ARRAY_SIZE(adi_pmx_functions),
> + .groups = adi_pin_groups,
> + .ngroups = ARRAY_SIZE(adi_pin_groups),
> + .pins = adi_pads,
> + .npins = ARRAY_SIZE(adi_pads),
> +};
> +
> +void adi_pinctrl_soc_init(const struct adi_pinctrl_soc_data **soc)
> +{
> + *soc = &adi_bf60x_soc;
> +}
> diff --git a/drivers/pinctrl/pinctrl-adi2.c b/drivers/pinctrl/pinctrl-adi2.c
> new file mode 100644
> index 0000000..7a24e59
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-adi2.c
> @@ -0,0 +1,1183 @@
> +/*
> + * Pinctrl Driver for ADI GPIO2 controller
> + *
> + * Copyright 2007-2013 Analog Devices Inc.
> + *
> + * Licensed under the GPLv2 or later
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/debugfs.h>
> +#include <linux/seq_file.h>
> +#include <linux/irq.h>
> +#include <linux/platform_data/pinctrl-adi2.h>
> +#include <linux/irqdomain.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/pinctrl/machine.h>
> +#include <linux/syscore_ops.h>
> +#include <linux/gpio.h>
> +#include <asm/portmux.h>
> +#include "pinctrl-adi2.h"
> +#include "core.h"
> +
> +/*
> +According to the BF54x HRM, pint means "pin interrupt".
> +http://www.analog.com/static/imported-files/processor_manuals/ADSP-BF54x_hwr_rev1.2.pdf
> +
> +ADSP-BF54x processor Blackfin processors have four SIC interrupt chan-
> +nels dedicated to pin interrupt purposes. These channels are managed by
> +four hardware blocks, called PINT0, PINT1, PINT2, and PINT3. Every PINTx
> +block can sense to up to 32 pins. While PINT0 and PINT1 can sense the
> +pins of port A and port B, PINT2 and PINT3 manage all the pins from port
> +C to port J as shown in Figure 9-2.
> +
> +n BF54x HRM:
> +The ten GPIO ports are subdivided into 8-bit half ports, resulting in lower and
> +upper half 8-bit units. The PINTx_ASSIGN registers control the 8-bit multi-
> +plexers shown in Figure 9-3. Lower half units of eight pins can be
> +forwarded to either byte 0 or byte 2 of either associated PINTx block.
> +Upper half units can be forwarded to either byte 1 or byte 3 of the pin
> +interrupt blocks, without further restrictions.
> +
> +All MMR registers in the pin interrupt module are 32 bits wide. To simply the
> +mapping logic, this driver only maps a 16-bit gpio port to the upper or lower
> +16 bits of a PINTx block. You can find the Figure 9-3 on page 583.
> +
> +Each IRQ domain is binding to a GPIO bank device. 2 GPIO bank devices can map
> +to one PINT device. Two in "struct gpio_pint" are used to ease the PINT
> +interrupt handler.
> +
> +The GPIO bank mapping to the lower 16 bits of the PINT device set its IRQ
> +domain pointer in domain[0]. The IRQ domain pointer of the other bank is set
> +to domain[1]. PINT interrupt handler adi_gpio_handle_pint_irq() finds out
> +the current domain pointer according to whether the interrupt request mask
> +is in lower 16 bits (domain[0]) or upper 16bits (domain[1]).
> +
> +A PINT device is not part of a GPIO port device in Blackfin. Multiple GPIO
> +port devices can be mapped to the same PINT device.
> +
> +*/
> +
> +static LIST_HEAD(adi_pint_list);
> +static LIST_HEAD(adi_gpio_port_list);
> +
> +#define DRIVER_NAME "pinctrl-adi2"
> +
> +#define PINT_HI_OFFSET 16
> +
> +/**
> + * struct gpio_port_saved - GPIO port registers that should be saved between
> + * power suspend and resume operations.
> + *
> + * @fer: PORTx_FER register
> + * @data: PORTx_DATA register
> + * @dir: PORTx_DIR register
> + * @inen: PORTx_INEN register
> + * @mux: PORTx_MUX register
> + */
> +struct gpio_port_saved {
> + u16 fer;
> + u16 data;
> + u16 dir;
> + u16 inen;
> + u32 mux;
> +};
> +
> +/**
> + * struct gpio_pint - Pin interrupt controller device. Multiple ADI GPIO
> + * banks can be mapped into one Pin interrupt controller.
> + *
> + * @node: All gpio_pint instances are added to a global list.
> + * @base: PINT device register base address
> + * @irq: IRQ of the PINT device, it is the parent IRQ of all
> + * GPIO IRQs mapping to this device.
> + * @domain: [0] irq domain of the gpio port, whose hardware interrupts are
> + * mapping to the low 16-bit of the pint registers.
> + * [1] irq domain of the gpio port, whose hardware interrupts are
> + * mapping to the high 16-bit of the pint registers.
> + * @regs: address pointer to the PINT device
> + * @map_count: No more than 2 GPIO banks can be mapped to this PINT device.
> + * @lock: This lock make sure the irq_chip operations to one PINT device
> + * for different GPIO interrrupts are atomic.
> + * @pint_map_port: Set up the mapping between one PINT device and
> + * multiple GPIO banks.
> + */
> +struct gpio_pint {
> + struct list_head node;
> + void __iomem *base;
> + int irq;
> + struct irq_domain *domain[2];
> + struct gpio_pint_regs *regs;
> + struct adi_pm_pint_save saved_data;
> + int map_count;
> + spinlock_t lock;
> +
> + int (*pint_map_port)(struct gpio_pint *pint, bool assign,
> + u8 map, struct irq_domain *domain);
> +};
> +
> +/**
> + * ADI pin controller
> + *
> + * @dev: a pointer back to containing device
> + * @pctl: the pinctrl device
> + * @soc: SoC data for this specific chip
> + */
> +struct adi_pinctrl {
> + struct device *dev;
> + struct pinctrl_dev *pctl;
> + const struct adi_pinctrl_soc_data *soc;
> +};
> +
> +/**
> + * struct gpio_port - GPIO bank device. Multiple ADI GPIO banks can be mapped
> + * into one pin interrupt controller.
> + *
> + * @node: All gpio_port instances are added to a list.
> + * @base: GPIO bank device register base address
> + * @irq_base: base IRQ of the GPIO bank device
> + * @width: PIN number of the GPIO bank device
> + * @regs: address pointer to the GPIO bank device
> + * @saved_data: registers that should be saved between PM operations.
> + * @dev: device structure of this GPIO bank
> + * @pint: GPIO PINT device that this GPIO bank mapped to
> + * @pint_map: GIOP bank mapping code in PINT device
> + * @pint_assign: The 32-bit PINT registers can be divided into 2 parts. A
> + * GPIO bank can be mapped into either low 16 bits[0] or high 16
> + * bits[1] of each PINT register.
> + * @lock: This lock make sure the irq_chip operations to one PINT device
> + * for different GPIO interrrupts are atomic.
> + * @chip: abstract a GPIO controller
> + * @domain: The irq domain owned by the GPIO port.
> + * @rsvmap: Reservation map array for each pin in the GPIO bank
> + */
> +struct gpio_port {
> + struct list_head node;
> + void __iomem *base;
> + unsigned int irq_base;
> + unsigned int width;
> + struct gpio_port_t *regs;
> + struct gpio_port_saved saved_data;
> + struct device *dev;
> +
> + struct gpio_pint *pint;
> + u8 pint_map;
> + bool pint_assign;
> +
> + spinlock_t lock;
> + struct gpio_chip chip;
> + struct irq_domain *domain;
> +};
> +
> +static inline u8 pin_to_offset(struct pinctrl_gpio_range *range, unsigned pin)
> +{
> + return pin - range->pin_base;
> +}
> +
> +static inline u32 hwirq_to_pintbit(struct gpio_port *port, int hwirq)
> +{
> + return port->pint_assign ? BIT(hwirq) << PINT_HI_OFFSET : BIT(hwirq);
> +}
> +
> +static struct gpio_pint *find_gpio_pint(unsigned id)
> +{
> + struct gpio_pint *pint;
> + int i = 0;
> +
> + list_for_each_entry(pint, &adi_pint_list, node) {
> + if (id == i)
> + return pint;
> + i++;
> + }
> +
> + return NULL;
> +}
> +
> +static inline void port_setup(struct gpio_port *port, unsigned offset,
> + bool use_for_gpio)
> +{
> + struct gpio_port_t *regs = port->regs;
> +
> + if (use_for_gpio)
> + writew(readw(®s->port_fer) & ~BIT(offset),
> + ®s->port_fer);
> + else
> + writew(readw(®s->port_fer) | BIT(offset), ®s->port_fer);
> +}
> +
> +static inline void portmux_setup(struct gpio_port *port, unsigned offset,
> + unsigned short function)
> +{
> + struct gpio_port_t *regs = port->regs;
> + u32 pmux;
> +
> + pmux = readl(®s->port_mux);
> +
> + /* The function field of each pin has 2 consecutive bits in
> + * the mux register.
> + */
> + pmux &= ~(0x3 << (2 * offset));
> + pmux |= (function & 0x3) << (2 * offset);
> +
> + writel(pmux, ®s->port_mux);
> +}
> +
> +static inline u16 get_portmux(struct gpio_port *port, unsigned offset)
> +{
> + struct gpio_port_t *regs = port->regs;
> + u32 pmux = readl(®s->port_mux);
> +
> + /* The function field of each pin has 2 consecutive bits in
> + * the mux register.
> + */
> + return pmux >> (2 * offset) & 0x3;
> +}
> +
> +static void adi_gpio_ack_irq(struct irq_data *d)
> +{
> + unsigned long flags;
> + struct gpio_port *port = irq_data_get_irq_chip_data(d);
> + struct gpio_pint_regs *regs = port->pint->regs;
> + unsigned pintbit = hwirq_to_pintbit(port, d->hwirq);
> +
> + spin_lock_irqsave(&port->lock, flags);
> + spin_lock_irqsave(&port->pint->lock, flags);
> +
> + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
> + if (readl(®s->invert_set) & pintbit)
> + writel(pintbit, ®s->invert_clear);
> + else
> + writel(pintbit, ®s->invert_set);
> + }
> +
> + writel(pintbit, ®s->request);
> +
> + spin_unlock_irqrestore(&port->pint->lock, flags);
> + spin_unlock_irqrestore(&port->lock, flags);
> +}
> +
> +static void adi_gpio_mask_ack_irq(struct irq_data *d)
> +{
> + unsigned long flags;
> + struct gpio_port *port = irq_data_get_irq_chip_data(d);
> + struct gpio_pint_regs *regs = port->pint->regs;
> + unsigned pintbit = hwirq_to_pintbit(port, d->hwirq);
> +
> + spin_lock_irqsave(&port->lock, flags);
> + spin_lock_irqsave(&port->pint->lock, flags);
> +
> + if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
> + if (readl(®s->invert_set) & pintbit)
> + writel(pintbit, ®s->invert_clear);
> + else
> + writel(pintbit, ®s->invert_set);
> + }
> +
> + writel(pintbit, ®s->request);
> + writel(pintbit, ®s->mask_clear);
> +
> + spin_unlock_irqrestore(&port->pint->lock, flags);
> + spin_unlock_irqrestore(&port->lock, flags);
> +}
> +
> +static void adi_gpio_mask_irq(struct irq_data *d)
> +{
> + unsigned long flags;
> + struct gpio_port *port = irq_data_get_irq_chip_data(d);
> + struct gpio_pint_regs *regs = port->pint->regs;
> +
> + spin_lock_irqsave(&port->lock, flags);
> + spin_lock_irqsave(&port->pint->lock, flags);
> +
> + writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_clear);
> +
> + spin_unlock_irqrestore(&port->pint->lock, flags);
> + spin_unlock_irqrestore(&port->lock, flags);
> +}
> +
> +static void adi_gpio_unmask_irq(struct irq_data *d)
> +{
> + unsigned long flags;
> + struct gpio_port *port = irq_data_get_irq_chip_data(d);
> + struct gpio_pint_regs *regs = port->pint->regs;
> +
> + spin_lock_irqsave(&port->lock, flags);
> + spin_lock_irqsave(&port->pint->lock, flags);
> +
> + writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_set);
> +
> + spin_unlock_irqrestore(&port->pint->lock, flags);
> + spin_unlock_irqrestore(&port->lock, flags);
> +}
> +
> +static unsigned int adi_gpio_irq_startup(struct irq_data *d)
> +{
> + unsigned long flags;
> + struct gpio_port *port = irq_data_get_irq_chip_data(d);
> + struct gpio_pint_regs *regs = port->pint->regs;
> +
> + if (!port) {
> + dev_err(port->dev, "GPIO IRQ %d :Not exist\n", d->irq);
> + return -ENODEV;
> + }
> +
> + spin_lock_irqsave(&port->lock, flags);
> + spin_lock_irqsave(&port->pint->lock, flags);
> +
> + port_setup(port, d->hwirq, true);
> + writew(BIT(d->hwirq), &port->regs->dir_clear);
> + writew(readw(&port->regs->inen) | BIT(d->hwirq), &port->regs->inen);
> +
> + writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_set);
> +
> + spin_unlock_irqrestore(&port->pint->lock, flags);
> + spin_unlock_irqrestore(&port->lock, flags);
> +
> + return 0;
> +}
> +
> +static void adi_gpio_irq_shutdown(struct irq_data *d)
> +{
> + unsigned long flags;
> + struct gpio_port *port = irq_data_get_irq_chip_data(d);
> + struct gpio_pint_regs *regs = port->pint->regs;
> +
> + spin_lock_irqsave(&port->lock, flags);
> + spin_lock_irqsave(&port->pint->lock, flags);
> +
> + writel(hwirq_to_pintbit(port, d->hwirq), ®s->mask_clear);
> +
> + spin_unlock_irqrestore(&port->pint->lock, flags);
> + spin_unlock_irqrestore(&port->lock, flags);
> +}
> +
> +static int adi_gpio_irq_type(struct irq_data *d, unsigned int type)
> +{
> + unsigned long flags;
> + struct gpio_port *port = irq_data_get_irq_chip_data(d);
> + struct gpio_pint_regs *pint_regs = port->pint->regs;
> + unsigned pintmask;
> + unsigned int irq = d->irq;
> + int ret = 0;
> + char buf[16];
> +
> + if (!port) {
> + dev_err(port->dev, "GPIO IRQ %d :Not exist\n", irq);
> + return -ENODEV;
> + }
> +
> + pintmask = hwirq_to_pintbit(port, d->hwirq);
> +
> + spin_lock_irqsave(&port->lock, flags);
> + spin_lock_irqsave(&port->pint->lock, flags);
> +
> + /* In case of interrupt autodetect, set irq type to edge sensitive. */
> + if (type == IRQ_TYPE_PROBE)
> + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
> +
> + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
> + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
> + snprintf(buf, 16, "gpio-irq%d", irq);
> + port_setup(port, d->hwirq, true);
> + } else
> + goto out;
> +
> + /* The GPIO interrupt is triggered only when its input value
> + * transfer from 0 to 1. So, invert the input value if the
> + * irq type is low or falling
> + */
> + if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
> + writel(pintmask, &pint_regs->invert_set);
> + else
> + writel(pintmask, &pint_regs->invert_clear);
> +
> + /* In edge sensitive case, if the input value of the requested irq
> + * is already 1, invert it.
> + */
> + if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
> + if (gpio_get_value(port->chip.base + d->hwirq))
> + writel(pintmask, &pint_regs->invert_set);
> + else
> + writel(pintmask, &pint_regs->invert_clear);
> + }
> +
> + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
> + writel(pintmask, &pint_regs->edge_set);
> + __irq_set_handler_locked(irq, handle_edge_irq);
> + } else {
> + writel(pintmask, &pint_regs->edge_clear);
> + __irq_set_handler_locked(irq, handle_level_irq);
> + }
> +
> +out:
> + spin_unlock_irqrestore(&port->pint->lock, flags);
> + spin_unlock_irqrestore(&port->lock, flags);
> +
> + return ret;
> +}
> +
> +#ifdef CONFIG_PM
> +static int adi_gpio_set_wake(struct irq_data *d, unsigned int state)
> +{
> + struct gpio_port *port = irq_data_get_irq_chip_data(d);
> +
> + if (!port || !port->pint || port->pint->irq != d->irq)
> + return -EINVAL;
> +
> +#ifndef SEC_GCTL
> + adi_internal_set_wake(port->pint->irq, state);
> +#endif
> +
> + return 0;
> +}
> +
> +static int adi_pint_suspend(void)
> +{
> + struct gpio_pint *pint;
> +
> + list_for_each_entry(pint, &adi_pint_list, node) {
> + writel(0xffffffff, &pint->regs->mask_clear);
> + pint->saved_data.assign = readl(&pint->regs->assign);
> + pint->saved_data.edge_set = readl(&pint->regs->edge_set);
> + pint->saved_data.invert_set = readl(&pint->regs->invert_set);
> + }
> +
> + return 0;
> +}
> +
> +static void adi_pint_resume(void)
> +{
> + struct gpio_pint *pint;
> +
> + list_for_each_entry(pint, &adi_pint_list, node) {
> + writel(pint->saved_data.assign, &pint->regs->assign);
> + writel(pint->saved_data.edge_set, &pint->regs->edge_set);
> + writel(pint->saved_data.invert_set, &pint->regs->invert_set);
> + }
> +}
> +
> +static int adi_gpio_suspend(void)
> +{
> + struct gpio_port *port;
> +
> + list_for_each_entry(port, &adi_gpio_port_list, node) {
> + port->saved_data.fer = readw(&port->regs->port_fer);
> + port->saved_data.mux = readl(&port->regs->port_mux);
> + port->saved_data.data = readw(&port->regs->data);
> + port->saved_data.inen = readw(&port->regs->inen);
> + port->saved_data.dir = readw(&port->regs->dir_set);
> + }
> +
> + return adi_pint_suspend();
> +}
> +
> +static void adi_gpio_resume(void)
> +{
> + struct gpio_port *port;
> +
> + adi_pint_resume();
> +
> + list_for_each_entry(port, &adi_gpio_port_list, node) {
> + writel(port->saved_data.mux, &port->regs->port_mux);
> + writew(port->saved_data.fer, &port->regs->port_fer);
> + writew(port->saved_data.inen, &port->regs->inen);
> + writew(port->saved_data.data & port->saved_data.dir,
> + &port->regs->data_set);
> + writew(port->saved_data.dir, &port->regs->dir_set);
> + }
> +
> +}
> +
> +static struct syscore_ops gpio_pm_syscore_ops = {
> + .suspend = adi_gpio_suspend,
> + .resume = adi_gpio_resume,
> +};
> +#else /* CONFIG_PM */
> +#define adi_gpio_set_wake NULL
> +#endif /* CONFIG_PM */
> +
> +#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
> +static inline void preflow_handler(struct irq_desc *desc)
> +{
> + if (desc->preflow_handler)
> + desc->preflow_handler(&desc->irq_data);
> +}
> +#else
> +static inline void preflow_handler(struct irq_desc *desc) { }
> +#endif
> +
> +static void adi_gpio_handle_pint_irq(unsigned int inta_irq,
> + struct irq_desc *desc)
> +{
> + u32 request;
> + u32 level_mask, hwirq;
> + bool umask = false;
> + struct gpio_pint *pint = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct gpio_pint_regs *regs = pint->regs;
> + struct irq_domain *domain;
> +
> + preflow_handler(desc);
> + chained_irq_enter(chip, desc);
> +
> + request = readl(®s->request);
> + level_mask = readl(®s->edge_set) & request;
> +
> + hwirq = 0;
> + domain = pint->domain[0];
> + while (request) {
> + /* domain pointer need to be changed only once at IRQ 16 when
> + * we go through IRQ requests from bit 0 to bit 31.
> + */
> + if (hwirq == PINT_HI_OFFSET)
> + domain = pint->domain[1];
> +
> + if (request & 1) {
> + if (level_mask & BIT(hwirq)) {
> + umask = true;
> + chained_irq_exit(chip, desc);
> + }
> + generic_handle_irq(irq_find_mapping(domain,
> + hwirq % PINT_HI_OFFSET));
> + }
> +
> + hwirq++;
> + request >>= 1;
> + }
> +
> + if (!umask)
> + chained_irq_exit(chip, desc);
> +}
> +
> +static struct irq_chip adi_gpio_irqchip = {
> + .name = "GPIO",
> + .irq_ack = adi_gpio_ack_irq,
> + .irq_mask = adi_gpio_mask_irq,
> + .irq_mask_ack = adi_gpio_mask_ack_irq,
> + .irq_unmask = adi_gpio_unmask_irq,
> + .irq_disable = adi_gpio_mask_irq,
> + .irq_enable = adi_gpio_unmask_irq,
> + .irq_set_type = adi_gpio_irq_type,
> + .irq_startup = adi_gpio_irq_startup,
> + .irq_shutdown = adi_gpio_irq_shutdown,
> + .irq_set_wake = adi_gpio_set_wake,
> +};
> +
> +static int adi_get_groups_count(struct pinctrl_dev *pctldev)
> +{
> + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
> +
> + return pinctrl->soc->ngroups;
> +}
> +
> +static const char *adi_get_group_name(struct pinctrl_dev *pctldev,
> + unsigned selector)
> +{
> + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
> +
> + return pinctrl->soc->groups[selector].name;
> +}
> +
> +static int adi_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
> + const unsigned **pins,
> + unsigned *num_pins)
> +{
> + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
> +
> + *pins = pinctrl->soc->groups[selector].pins;
> + *num_pins = pinctrl->soc->groups[selector].num;
> + return 0;
> +}
> +
> +static struct pinctrl_ops adi_pctrl_ops = {
> + .get_groups_count = adi_get_groups_count,
> + .get_group_name = adi_get_group_name,
> + .get_group_pins = adi_get_group_pins,
> +};
> +
> +static int adi_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector,
> + unsigned group)
> +{
> + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
> + struct gpio_port *port;
> + struct pinctrl_gpio_range *range;
> + unsigned long flags;
> + unsigned short *mux, pin;
> +
> + mux = (unsigned short *)pinctrl->soc->functions[selector].mux;
> +
> + while (*mux) {
> + pin = P_IDENT(*mux);
> +
> + range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
> + if (range == NULL) /* should not happen */
> + return -ENODEV;
> +
> + port = container_of(range->gc, struct gpio_port, chip);
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + portmux_setup(port, pin_to_offset(range, pin),
> + P_FUNCT2MUX(*mux));
> + port_setup(port, pin_to_offset(range, pin), false);
> + mux++;
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> + }
> +
> + return 0;
> +}
> +
> +static void adi_pinmux_disable(struct pinctrl_dev *pctldev, unsigned selector,
> + unsigned group)
> +{
> + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
> + struct gpio_port *port;
> + struct pinctrl_gpio_range *range;
> + unsigned long flags;
> + unsigned short *mux, pin;
> +
> + mux = (unsigned short *)pinctrl->soc->functions[selector].mux;
> +
> + while (*mux) {
> + pin = P_IDENT(*mux);
> +
> + range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
> + if (range == NULL) /* should not happen */
> + return;
> +
> + port = container_of(range->gc, struct gpio_port, chip);
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + port_setup(port, pin_to_offset(range, pin), true);
> + mux++;
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> + }
> +}
> +
> +static int adi_pinmux_get_funcs_count(struct pinctrl_dev *pctldev)
> +{
> + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
> +
> + return pinctrl->soc->nfunctions;
> +}
> +
> +static const char *adi_pinmux_get_func_name(struct pinctrl_dev *pctldev,
> + unsigned selector)
> +{
> + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
> +
> + return pinctrl->soc->functions[selector].name;
> +}
> +
> +static int adi_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
> + const char * const **groups,
> + unsigned * const num_groups)
> +{
> + struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
> +
> + *groups = pinctrl->soc->functions[selector].groups;
> + *num_groups = pinctrl->soc->functions[selector].num_groups;
> + return 0;
> +}
> +
> +static int adi_pinmux_request_gpio(struct pinctrl_dev *pctldev,
> + struct pinctrl_gpio_range *range, unsigned pin)
> +{
> + struct gpio_port *port;
> + unsigned long flags;
> + u8 offset;
> +
> + port = container_of(range->gc, struct gpio_port, chip);
> + offset = pin_to_offset(range, pin);
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + port_setup(port, offset, true);
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> +
> + return 0;
> +}
> +
> +static struct pinmux_ops adi_pinmux_ops = {
> + .enable = adi_pinmux_enable,
> + .disable = adi_pinmux_disable,
> + .get_functions_count = adi_pinmux_get_funcs_count,
> + .get_function_name = adi_pinmux_get_func_name,
> + .get_function_groups = adi_pinmux_get_groups,
> + .gpio_request_enable = adi_pinmux_request_gpio,
> +};
> +
> +
> +static struct pinctrl_desc adi_pinmux_desc = {
> + .name = DRIVER_NAME,
> + .pctlops = &adi_pctrl_ops,
> + .pmxops = &adi_pinmux_ops,
> + .owner = THIS_MODULE,
> +};
> +
> +static int adi_gpio_request(struct gpio_chip *chip, unsigned offset)
> +{
> + return pinctrl_request_gpio(chip->base + offset);
> +}
> +
> +static void adi_gpio_free(struct gpio_chip *chip, unsigned offset)
> +{
> + pinctrl_free_gpio(chip->base + offset);
> +}
> +
> +static int adi_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
> +{
> + struct gpio_port *port;
> + unsigned long flags;
> +
> + port = container_of(chip, struct gpio_port, chip);
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + writew(BIT(offset), &port->regs->dir_clear);
> + writew(readw(&port->regs->inen) | BIT(offset), &port->regs->inen);
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> +
> + return 0;
> +}
> +
> +static void adi_gpio_set_value(struct gpio_chip *chip, unsigned offset,
> + int value)
> +{
> + struct gpio_port *port = container_of(chip, struct gpio_port, chip);
> + struct gpio_port_t *regs = port->regs;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + if (value)
> + writew(1 << offset, ®s->data_set);
> + else
> + writew(1 << offset, ®s->data_clear);
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> +}
> +
> +static int adi_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
> + int value)
> +{
> + struct gpio_port *port = container_of(chip, struct gpio_port, chip);
> + struct gpio_port_t *regs = port->regs;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + writew(readw(®s->inen) & ~(1 << offset), ®s->inen);
> + adi_gpio_set_value(chip, offset, value);
> + writew(1 << offset, ®s->dir_set);
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> +
> + return 0;
> +}
> +
> +static int adi_gpio_get_value(struct gpio_chip *chip, unsigned offset)
> +{
> + struct gpio_port *port = container_of(chip, struct gpio_port, chip);
> + struct gpio_port_t *regs = port->regs;
> + unsigned long flags;
> + int ret;
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + ret = !!(readw(®s->data) & BIT(offset));
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> +
> + return ret;
> +}
> +
> +static int adi_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
> +{
> + struct gpio_port *port = container_of(chip, struct gpio_port, chip);
> +
> + if (port->irq_base >= 0)
> + return irq_find_mapping(port->domain, offset);
> + else
> + return irq_create_mapping(port->domain, offset);
> +}
> +
> +static int adi_pint_map_port(struct gpio_pint *pint, bool assign, u8 map,
> + struct irq_domain *domain)
> +{
> + struct gpio_pint_regs *regs = pint->regs;
> + u32 map_mask;
> +
> + if (pint->map_count > 1)
> + return -EINVAL;
> +
> + pint->map_count++;
> +
> + /* The map_mask of each gpio port is a 16-bit duplicate
> + * of the 8-bit map. It can be set to either high 16 bits or low
> + * 16 bits of the pint assignment register.
> + */
> + map_mask = (map << 8) | map;
> + if (assign) {
> + map_mask <<= PINT_HI_OFFSET;
> + writel((readl(®s->assign) & 0xFFFF) | map_mask,
> + ®s->assign);
> + } else
> + writel((readl(®s->assign) & 0xFFFF0000) | map_mask,
> + ®s->assign);
> +
> + pint->domain[assign] = domain;
> +
> + return 0;
> +}
> +
> +static int adi_gpio_pint_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + struct gpio_pint *pint;
> +
> + pint = devm_kzalloc(dev, sizeof(struct gpio_pint), GFP_KERNEL);
> + if (!pint) {
> + dev_err(dev, "Memory alloc failed\n");
> + return -ENOMEM;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(dev, "Invalid mem resource\n");
> + return -ENODEV;
> + }
> +
> + if (!devm_request_mem_region(dev, res->start, resource_size(res),
> + pdev->name)) {
> + dev_err(dev, "Region already claimed\n");
> + return -EBUSY;
> + }
> +
> + pint->base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!pint->base) {
> + dev_err(dev, "Could not ioremap\n");
> + return -ENOMEM;
> + }
> +
> + pint->regs = (struct gpio_pint_regs *)pint->base;
> +
> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> + if (!res) {
> + dev_err(dev, "Invalid IRQ resource\n");
> + return -ENODEV;
> + }
> +
> + spin_lock_init(&pint->lock);
> +
> + pint->irq = res->start;
> + pint->pint_map_port = adi_pint_map_port;
> + platform_set_drvdata(pdev, pint);
> +
> + irq_set_chained_handler(pint->irq, adi_gpio_handle_pint_irq);
> + irq_set_handler_data(pint->irq, pint);
> +
> + list_add_tail(&pint->node, &adi_pint_list);
> +
> + return 0;
> +}
> +
> +static int adi_gpio_pint_remove(struct platform_device *pdev)
> +{
> + struct gpio_pint *pint = platform_get_drvdata(pdev);
> +
> + list_del(&pint->node);
> + irq_set_handler(pint->irq, handle_simple_irq);
> +
> + return 0;
> +}
> +
> +static int adi_gpio_irq_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + struct gpio_port *port = d->host_data;
> +
> + if (!port)
> + return -EINVAL;
> +
> + irq_set_chip_data(irq, port);
> + irq_set_chip_and_handler(irq, &adi_gpio_irqchip,
> + handle_level_irq);
> +
> + return 0;
> +}
> +
> +const struct irq_domain_ops adi_gpio_irq_domain_ops = {
> + .map = adi_gpio_irq_map,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static int adi_gpio_init_int(struct gpio_port *port)
> +{
> + struct device_node *node = port->dev->of_node;
> + struct gpio_pint *pint = port->pint;
> + int ret;
> +
> + port->domain = irq_domain_add_linear(node, port->width,
> + &adi_gpio_irq_domain_ops, port);
> + if (!port->domain) {
> + dev_err(port->dev, "Failed to create irqdomain\n");
> + return -ENOSYS;
> + }
> +
> + /* According to BF54x and BF60x HRM, pin interrupt devices are not
> + * part of the GPIO port device. in GPIO interrupt mode, the GPIO
> + * pins of multiple port devices can be routed into one pin interrupt
> + * device. The mapping can be configured by setting pint assignment
> + * register with the mapping value of different GPIO port. This is
> + * done via function pint_map_port().
> + */
> + ret = pint->pint_map_port(port->pint, port->pint_assign,
> + port->pint_map, port->domain);
> + if (ret)
> + return ret;
> +
> + if (port->irq_base >= 0) {
> + ret = irq_create_strict_mappings(port->domain, port->irq_base,
> + 0, port->width);
> + if (ret) {
> + dev_err(port->dev, "Couldn't associate to domain\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +#define DEVNAME_SIZE 16
> +
> +static int adi_gpio_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct adi_pinctrl_gpio_platform_data *pdata;
> + struct resource *res;
> + struct gpio_port *port;
> + char pinctrl_devname[DEVNAME_SIZE];
> + static int gpio;
> + int ret = 0, ret1;
> +
> + pdata = dev->platform_data;
> + if (!pdata)
> + return -EINVAL;
> +
> + port = devm_kzalloc(dev, sizeof(struct gpio_port), GFP_KERNEL);
> + if (!port) {
> + dev_err(dev, "Memory alloc failed\n");
> + return -ENOMEM;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(dev, "Invalid mem resource\n");
> + return -ENODEV;
> + }
> +
> + if (!devm_request_mem_region(dev, res->start, resource_size(res),
> + pdev->name)) {
> + dev_err(dev, "Region already claimed\n");
> + return -EBUSY;
> + }
> +
> + port->base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!port->base) {
> + dev_err(dev, "Could not ioremap\n");
> + return -ENOMEM;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> + if (!res)
> + port->irq_base = -1;
> + else
> + port->irq_base = res->start;
> +
> + port->width = pdata->port_width;
> + port->dev = dev;
> + port->regs = (struct gpio_port_t *)port->base;
> + port->pint_assign = pdata->pint_assign;
> + port->pint_map = pdata->pint_map;
> +
> + port->pint = find_gpio_pint(pdata->pint_id);
> + if (port->pint) {
> + ret = adi_gpio_init_int(port);
> + if (ret)
> + return ret;
> + }
> +
> + spin_lock_init(&port->lock);
> +
> + platform_set_drvdata(pdev, port);
> +
> + port->chip.label = "adi-gpio";
> + port->chip.direction_input = adi_gpio_direction_input;
> + port->chip.get = adi_gpio_get_value;
> + port->chip.direction_output = adi_gpio_direction_output;
> + port->chip.set = adi_gpio_set_value;
> + port->chip.request = adi_gpio_request;
> + port->chip.free = adi_gpio_free;
> + port->chip.to_irq = adi_gpio_to_irq;
> + if (pdata->port_gpio_base > 0)
> + port->chip.base = pdata->port_gpio_base;
> + else
> + port->chip.base = gpio;
> + port->chip.ngpio = port->width;
> + gpio = port->chip.base + port->width;
> +
> + ret = gpiochip_add(&port->chip);
> + if (ret) {
> + dev_err(&pdev->dev, "Fail to add GPIO chip.\n");
> + goto out_remove_domain;
> + }
> +
> + /* Add gpio pin range */
> + snprintf(pinctrl_devname, DEVNAME_SIZE, "pinctrl-adi2.%d",
> + pdata->pinctrl_id);
> + pinctrl_devname[DEVNAME_SIZE - 1] = 0;
> + ret = gpiochip_add_pin_range(&port->chip, pinctrl_devname,
> + 0, pdata->port_pin_base, port->width);
> + if (ret) {
> + dev_err(&pdev->dev, "Fail to add pin range to %s.\n",
> + pinctrl_devname);
> + goto out_remove_gpiochip;
> + }
> +
> + list_add_tail(&port->node, &adi_gpio_port_list);
> +
> + return 0;
> +
> +out_remove_gpiochip:
> + ret1 = gpiochip_remove(&port->chip);
> +out_remove_domain:
> + if (port->pint)
> + irq_domain_remove(port->domain);
> +
> + return ret;
> +}
> +
> +static int adi_gpio_remove(struct platform_device *pdev)
> +{
> + struct gpio_port *port = platform_get_drvdata(pdev);
> + int ret;
> + u8 offset;
> +
> + list_del(&port->node);
> + gpiochip_remove_pin_ranges(&port->chip);
> + ret = gpiochip_remove(&port->chip);
> + if (port->pint) {
> + for (offset = 0; offset < port->width; offset++)
> + irq_dispose_mapping(irq_find_mapping(port->domain,
> + offset));
> + irq_domain_remove(port->domain);
> + }
> +
> + return ret;
> +}
> +
> +static int adi_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct adi_pinctrl *pinctrl;
> +
> + pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
> + if (!pinctrl)
> + return -ENOMEM;
> +
> + pinctrl->dev = &pdev->dev;
> +
> + adi_pinctrl_soc_init(&pinctrl->soc);
> +
> + adi_pinmux_desc.pins = pinctrl->soc->pins;
> + adi_pinmux_desc.npins = pinctrl->soc->npins;
> +
> + /* Now register the pin controller and all pins it handles */
> + pinctrl->pctl = pinctrl_register(&adi_pinmux_desc, &pdev->dev, pinctrl);
> + if (!pinctrl->pctl) {
> + dev_err(&pdev->dev, "could not register pinctrl ADI2 driver\n");
> + return -EINVAL;
> + }
> +
> + platform_set_drvdata(pdev, pinctrl);
> +
> + return 0;
> +}
> +
> +static int adi_pinctrl_remove(struct platform_device *pdev)
> +{
> + struct adi_pinctrl *pinctrl = platform_get_drvdata(pdev);
> +
> + pinctrl_unregister(pinctrl->pctl);
> +
> + return 0;
> +}
> +
> +static struct platform_driver adi_pinctrl_driver = {
> + .probe = adi_pinctrl_probe,
> + .remove = adi_pinctrl_remove,
> + .driver = {
> + .name = DRIVER_NAME,
> + },
> +};
> +
> +static struct platform_driver adi_gpio_pint_driver = {
> + .probe = adi_gpio_pint_probe,
> + .remove = adi_gpio_pint_remove,
> + .driver = {
> + .name = "adi-gpio-pint",
> + },
> +};
> +
> +static struct platform_driver adi_gpio_driver = {
> + .probe = adi_gpio_probe,
> + .remove = adi_gpio_remove,
> + .driver = {
> + .name = "adi-gpio",
> + },
> +};
> +
> +static int __init adi_pinctrl_setup(void)
> +{
> + int ret;
> +
> + ret = platform_driver_register(&adi_pinctrl_driver);
> + if (ret)
> + return ret;
> +
> + ret = platform_driver_register(&adi_gpio_pint_driver);
> + if (ret)
> + goto pint_error;
> +
> + ret = platform_driver_register(&adi_gpio_driver);
> + if (ret)
> + goto gpio_error;
> +
> +#ifdef CONFIG_PM
> + register_syscore_ops(&gpio_pm_syscore_ops);
> +#endif
> + return ret;
> +gpio_error:
> + platform_driver_unregister(&adi_gpio_pint_driver);
> +pint_error:
> + platform_driver_unregister(&adi_pinctrl_driver);
> +
> + return ret;
> +}
> +arch_initcall(adi_pinctrl_setup);
> +
> +MODULE_AUTHOR("Sonic Zhang <[email protected]>");
> +MODULE_DESCRIPTION("ADI gpio2 pin control driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/pinctrl/pinctrl-adi2.h b/drivers/pinctrl/pinctrl-adi2.h
> new file mode 100644
> index 0000000..1f06f8d
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-adi2.h
> @@ -0,0 +1,75 @@
> +/*
> + * Pinctrl Driver for ADI GPIO2 controller
> + *
> + * Copyright 2007-2013 Analog Devices Inc.
> + *
> + * Licensed under the GPLv2 or later
> + */
> +
> +#ifndef PINCTRL_PINCTRL_ADI2_H
> +#define PINCTRL_PINCTRL_ADI2_H
> +
> +#include <linux/pinctrl/pinctrl.h>
> +
> + /**
> + * struct adi_pin_group - describes a pin group
> + * @name: the name of this pin group
> + * @pins: an array of pins
> + * @num: the number of pins in this array
> + */
> +struct adi_pin_group {
> + const char *name;
> + const unsigned *pins;
> + const unsigned num;
> +};
> +
> +#define ADI_PIN_GROUP(n, p) \
> + { \
> + .name = n, \
> + .pins = p, \
> + .num = ARRAY_SIZE(p), \
> + }
> +
> + /**
> + * struct adi_pmx_func - describes function mux setting of pin groups
> + * @name: the name of this function mux setting
> + * @groups: an array of pin groups
> + * @num_groups: the number of pin groups in this array
> + * @mux: the function mux setting array, end by zero
> + */
> +struct adi_pmx_func {
> + const char *name;
> + const char * const *groups;
> + const unsigned num_groups;
> + const unsigned short *mux;
> +};
> +
> +#define ADI_PMX_FUNCTION(n, g, m) \
> + { \
> + .name = n, \
> + .groups = g, \
> + .num_groups = ARRAY_SIZE(g), \
> + .mux = m, \
> + }
> +
> +/**
> + * struct adi_pinctrl_soc_data - ADI pin controller per-SoC configuration
> + * @functions: The functions supported on this SoC.
> + * @nfunction: The number of entries in @functions.
> + * @groups: An array describing all pin groups the pin SoC supports.
> + * @ngroups: The number of entries in @groups.
> + * @pins: An array describing all pins the pin controller affects.
> + * @npins: The number of entries in @pins.
> + */
> +struct adi_pinctrl_soc_data {
> + const struct adi_pmx_func *functions;
> + int nfunctions;
> + const struct adi_pin_group *groups;
> + int ngroups;
> + const struct pinctrl_pin_desc *pins;
> + int npins;
> +};
> +
> +void adi_pinctrl_soc_init(const struct adi_pinctrl_soc_data **soc);
> +
> +#endif /* PINCTRL_PINCTRL_ADI2_H */
> diff --git a/include/linux/platform_data/pinctrl-adi2.h b/include/linux/platform_data/pinctrl-adi2.h
> new file mode 100644
> index 0000000..8f91300
> --- /dev/null
> +++ b/include/linux/platform_data/pinctrl-adi2.h
> @@ -0,0 +1,40 @@
> +/*
> + * Pinctrl Driver for ADI GPIO2 controller
> + *
> + * Copyright 2007-2013 Analog Devices Inc.
> + *
> + * Licensed under the GPLv2 or later
> + */
> +
> +
> +#ifndef PINCTRL_ADI2_H
> +#define PINCTRL_ADI2_H
> +
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +
> +/**
> + * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data
> + * for ADI GPIO2 device.
> + *
> + * @port_gpio_base: Optional global GPIO index of the GPIO bank.
> + * 0 means driver decides.
> + * @port_pin_base: Pin index of the pin controller device.
> + * @port_width: PIN number of the GPIO bank device
> + * @pint_id: GPIO PINT device id that this GPIO bank should map to.
> + * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A
> + * GPIO bank can be mapped into either low 16 bits[0] or high 16
> + * bits[1] of each PINT register.
> + * @pint_map: GIOP bank mapping code in PINT device
> + */
> +struct adi_pinctrl_gpio_platform_data {
> + unsigned int port_gpio_base;
> + unsigned int port_pin_base;
> + unsigned int port_width;
> + u8 pinctrl_id;
> + u8 pint_id;
> + bool pint_assign;
> + u8 pint_map;
> +};
> +
> +#endif
> --
> 1.8.2.3
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
On Mon, Sep 9, 2013 at 7:07 AM, Sonic Zhang <[email protected]> wrote:
> PING
We are currently in the middle of the merge window, and all subsystem
maintainers incl. me are very busy with testing the HEAD of Torvalds'
tree, and fixing any regressions. Also we don't have a stable baseline
for merging new drivers anyway.
Please be patient for the time being.
Yours,
Linus Walleij
On Tue, Sep 3, 2013 at 10:28 AM, Sonic Zhang <[email protected]> wrote:
> From: Sonic Zhang <[email protected]>
>
> The new ADI GPIO2 controller was introduced since the BF548 and BF60x
> processors. It differs a lot from the old one on BF5xx processors. So,
> create a pinctrl driver under the pinctrl framework.
(...)
> v4-changes:
(...)
I'm quite happy with v4, and applied it to my devel branch
in the pinctrl tree so we get some rotation in linux-next.
If I can get an ACK from the Blackfin maintainer on patches
2 and 3 I'll apply those as well so you don't have to pull
the pinctrl tree into blackfins tree, Mike?
Yours,
Linus Walleij
Hi Linus,
On Thu, Sep 19, 2013 at 8:45 PM, Linus Walleij <[email protected]> wrote:
> On Tue, Sep 3, 2013 at 10:28 AM, Sonic Zhang <[email protected]> wrote:
>
>> From: Sonic Zhang <[email protected]>
>>
>> The new ADI GPIO2 controller was introduced since the BF548 and BF60x
>> processors. It differs a lot from the old one on BF5xx processors. So,
>> create a pinctrl driver under the pinctrl framework.
> (...)
>> v4-changes:
> (...)
>
> I'm quite happy with v4, and applied it to my devel branch
> in the pinctrl tree so we get some rotation in linux-next.
>
> If I can get an ACK from the Blackfin maintainer on patches
> 2 and 3 I'll apply those as well so you don't have to pull
> the pinctrl tree into blackfins tree, Mike?
Pls apply those patches to your pinctrl tree, thanks.
-steven
>
> Yours,
> Linus Walleij
Acked-by: Steven Miao <[email protected]>
On Tue, Sep 3, 2013 at 4:29 PM, Sonic Zhang <[email protected]> wrote:
> From: Sonic Zhang <[email protected]>
>
> - Remove non gpio lib code from blackfin architecture.
> - Limit the lagecy blackfin gpio driver to bf5xx processors only.
> - Remove unused definition of the pint power functions.
>
> Signed-off-by: Sonic Zhang <[email protected]>
> Acked-by: Linus Walleij <[email protected]>
> ---
> arch/blackfin/Kconfig | 7 ++
> arch/blackfin/include/asm/gpio.h | 157 +++++----------------------------------
> arch/blackfin/kernel/Makefile | 3 +-
> 3 files changed, 29 insertions(+), 138 deletions(-)
>
> diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
> index a117652..9eff25b 100644
> --- a/arch/blackfin/Kconfig
> +++ b/arch/blackfin/Kconfig
> @@ -52,6 +52,9 @@ config GENERIC_BUG
> config ZONE_DMA
> def_bool y
>
> +config GENERIC_GPIO
> + def_bool y
> +
> config FORCE_MAX_ZONEORDER
> int
> default "14"
> @@ -317,6 +320,10 @@ config BF53x
> depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
> default y
>
> +config GPIO_ADI
> + def_bool y
> + depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
> +
> config MEM_MT48LC64M4A2FB_7E
> bool
> depends on (BFIN533_STAMP)
> diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
> index 98d0133..99d338c 100644
> --- a/arch/blackfin/include/asm/gpio.h
> +++ b/arch/blackfin/include/asm/gpio.h
> @@ -25,8 +25,12 @@
>
> #ifndef __ASSEMBLY__
>
> +#ifndef CONFIG_PINCTRL
> +
> #include <linux/compiler.h>
> -#include <linux/gpio.h>
> +#include <asm/blackfin.h>
> +#include <asm/portmux.h>
> +#include <asm/irq_handler.h>
>
> /***********************************************************
> *
> @@ -45,7 +49,6 @@
> * MODIFICATION HISTORY :
> **************************************************************/
>
> -#if !BFIN_GPIO_PINT
> void set_gpio_dir(unsigned, unsigned short);
> void set_gpio_inen(unsigned, unsigned short);
> void set_gpio_polar(unsigned, unsigned short);
> @@ -115,7 +118,6 @@ struct gpio_port_t {
> unsigned short dummy16;
> unsigned short inen;
> };
> -#endif
>
> #ifdef BFIN_SPECIAL_GPIO_BANKS
> void bfin_special_gpio_free(unsigned gpio);
> @@ -127,25 +129,21 @@ void bfin_special_gpio_pm_hibernate_suspend(void);
> #endif
>
> #ifdef CONFIG_PM
> -int bfin_pm_standby_ctrl(unsigned ctrl);
> +void bfin_gpio_pm_hibernate_restore(void);
> +void bfin_gpio_pm_hibernate_suspend(void);
> +int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
> +int bfin_gpio_pm_standby_ctrl(unsigned ctrl);
>
> static inline int bfin_pm_standby_setup(void)
> {
> - return bfin_pm_standby_ctrl(1);
> + return bfin_gpio_pm_standby_ctrl(1);
> }
>
> static inline void bfin_pm_standby_restore(void)
> {
> - bfin_pm_standby_ctrl(0);
> + bfin_gpio_pm_standby_ctrl(0);
> }
>
> -void bfin_gpio_pm_hibernate_restore(void);
> -void bfin_gpio_pm_hibernate_suspend(void);
> -void bfin_pint_suspend(void);
> -void bfin_pint_resume(void);
> -
> -# if !BFIN_GPIO_PINT
> -int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
>
> struct gpio_port_s {
> unsigned short data;
> @@ -161,7 +159,6 @@ struct gpio_port_s {
> unsigned short reserved;
> unsigned short mux;
> };
> -# endif
> #endif /*CONFIG_PM*/
>
> /***********************************************************
> @@ -178,36 +175,29 @@ struct gpio_port_s {
> *************************************************************
> * MODIFICATION HISTORY :
> **************************************************************/
> -
> -int bfin_gpio_request(unsigned gpio, const char *label);
> -void bfin_gpio_free(unsigned gpio);
> int bfin_gpio_irq_request(unsigned gpio, const char *label);
> void bfin_gpio_irq_free(unsigned gpio);
> -int bfin_gpio_direction_input(unsigned gpio);
> -int bfin_gpio_direction_output(unsigned gpio, int value);
> -int bfin_gpio_get_value(unsigned gpio);
> -void bfin_gpio_set_value(unsigned gpio, int value);
> +void bfin_gpio_irq_prepare(unsigned gpio);
> +
> +static inline int irq_to_gpio(unsigned irq)
> +{
> + return irq - GPIO_IRQ_BASE;
> +}
> +#endif /* CONFIG_PINCTRL */
>
> #include <asm/irq.h>
> #include <asm/errno.h>
>
> -#ifdef CONFIG_GPIOLIB
> #include <asm-generic/gpio.h> /* cansleep wrappers */
>
> static inline int gpio_get_value(unsigned int gpio)
> {
> - if (gpio < MAX_BLACKFIN_GPIOS)
> - return bfin_gpio_get_value(gpio);
> - else
> - return __gpio_get_value(gpio);
> + return __gpio_get_value(gpio);
> }
>
> static inline void gpio_set_value(unsigned int gpio, int value)
> {
> - if (gpio < MAX_BLACKFIN_GPIOS)
> - bfin_gpio_set_value(gpio, value);
> - else
> - __gpio_set_value(gpio, value);
> + __gpio_set_value(gpio, value);
> }
>
> static inline int gpio_cansleep(unsigned int gpio)
> @@ -219,113 +209,6 @@ static inline int gpio_to_irq(unsigned gpio)
> {
> return __gpio_to_irq(gpio);
> }
> -
> -#else /* !CONFIG_GPIOLIB */
> -
> -static inline int gpio_request(unsigned gpio, const char *label)
> -{
> - return bfin_gpio_request(gpio, label);
> -}
> -
> -static inline void gpio_free(unsigned gpio)
> -{
> - return bfin_gpio_free(gpio);
> -}
> -
> -static inline int gpio_direction_input(unsigned gpio)
> -{
> - return bfin_gpio_direction_input(gpio);
> -}
> -
> -static inline int gpio_direction_output(unsigned gpio, int value)
> -{
> - return bfin_gpio_direction_output(gpio, value);
> -}
> -
> -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
> -{
> - return -EINVAL;
> -}
> -
> -static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
> -{
> - int err;
> -
> - err = bfin_gpio_request(gpio, label);
> - if (err)
> - return err;
> -
> - if (flags & GPIOF_DIR_IN)
> - err = bfin_gpio_direction_input(gpio);
> - else
> - err = bfin_gpio_direction_output(gpio,
> - (flags & GPIOF_INIT_HIGH) ? 1 : 0);
> -
> - if (err)
> - bfin_gpio_free(gpio);
> -
> - return err;
> -}
> -
> -static inline int gpio_request_array(const struct gpio *array, size_t num)
> -{
> - int i, err;
> -
> - for (i = 0; i < num; i++, array++) {
> - err = gpio_request_one(array->gpio, array->flags, array->label);
> - if (err)
> - goto err_free;
> - }
> - return 0;
> -
> -err_free:
> - while (i--)
> - bfin_gpio_free((--array)->gpio);
> - return err;
> -}
> -
> -static inline void gpio_free_array(const struct gpio *array, size_t num)
> -{
> - while (num--)
> - bfin_gpio_free((array++)->gpio);
> -}
> -
> -static inline int __gpio_get_value(unsigned gpio)
> -{
> - return bfin_gpio_get_value(gpio);
> -}
> -
> -static inline void __gpio_set_value(unsigned gpio, int value)
> -{
> - return bfin_gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_get_value(unsigned gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned gpio, int value)
> -{
> - return __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_to_irq(unsigned gpio)
> -{
> - if (likely(gpio < MAX_BLACKFIN_GPIOS))
> - return gpio + GPIO_IRQ_BASE;
> -
> - return -EINVAL;
> -}
> -
> -#include <asm-generic/gpio.h> /* cansleep wrappers */
> -#endif /* !CONFIG_GPIOLIB */
> -
> -static inline int irq_to_gpio(unsigned irq)
> -{
> - return (irq - GPIO_IRQ_BASE);
> -}
> -
> #endif /* __ASSEMBLY__ */
>
> #endif /* __ARCH_BLACKFIN_GPIO_H__ */
> diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
> index 735f24e..703dc7c 100644
> --- a/arch/blackfin/kernel/Makefile
> +++ b/arch/blackfin/kernel/Makefile
> @@ -7,7 +7,7 @@ extra-y := vmlinux.lds
> obj-y := \
> entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
> sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
> - fixed_code.o reboot.o bfin_gpio.o bfin_dma.o \
> + fixed_code.o reboot.o bfin_dma.o \
> exception.o dumpstack.o
>
> ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
> @@ -16,6 +16,7 @@ else
> obj-y += time.o
> endif
>
> +obj-$(CONFIG_GPIO_ADI) += bfin_gpio.o
> obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
> obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o
> obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
> --
> 1.8.2.3
>
>
Acked-by: Steven Miao <[email protected]>
On Tue, Sep 3, 2013 at 4:29 PM, Sonic Zhang <[email protected]> wrote:
> From: Sonic Zhang <[email protected]>
>
> - Remove unused macro MAX_RESOURCES
> - Override blackfin legacy peripheral pinmux request and free APIs by
> devm_pinctrl_get_select_default() to init the peripheral portmux setting.
>
> v3-chagnes:
> - Move pinctrl soc data out of blackfin arch folder.
>
> Signed-off-by: Sonic Zhang <[email protected]>
> ---
> arch/blackfin/Kconfig | 4 ++++
> arch/blackfin/include/asm/portmux.h | 19 +++++++++++++++++--
> arch/blackfin/mach-bf548/include/mach/portmux.h | 2 --
> arch/blackfin/mach-bf609/include/mach/portmux.h | 2 --
> 4 files changed, 21 insertions(+), 6 deletions(-)
>
> diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
> index 9eff25b..ed7157f 100644
> --- a/arch/blackfin/Kconfig
> +++ b/arch/blackfin/Kconfig
> @@ -324,6 +324,10 @@ config GPIO_ADI
> def_bool y
> depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
>
> +config PINCTRL
> + def_bool y
> + depends on BF54x || BF60x
> +
> config MEM_MT48LC64M4A2FB_7E
> bool
> depends on (BFIN533_STAMP)
> diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
> index 9b1e2c3..7aa2043 100644
> --- a/arch/blackfin/include/asm/portmux.h
> +++ b/arch/blackfin/include/asm/portmux.h
> @@ -17,14 +17,29 @@
> #define P_MAYSHARE 0x2000
> #define P_DONTCARE 0x1000
>
> -
> +#ifdef CONFIG_PINCTRL
> +#include <asm/irq_handler.h>
> +
> +#define gpio_pint_regs bfin_pint_regs
> +#define adi_internal_set_wake bfin_internal_set_wake
> +
> +#define peripheral_request(per, label) 0
> +#define peripheral_free(per)
> +#define peripheral_request_list(per, label) \
> + (pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \
> + ? -EINVAL : 0) : 0)
> +#define peripheral_free_list(per)
> +#else
> int peripheral_request(unsigned short per, const char *label);
> void peripheral_free(unsigned short per);
> int peripheral_request_list(const unsigned short per[], const char *label);
> void peripheral_free_list(const unsigned short per[]);
> +#endif
>
> -#include <asm/gpio.h>
> +#include <linux/err.h>
> +#include <linux/pinctrl/pinctrl.h>
> #include <mach/portmux.h>
> +#include <linux/gpio.h>
>
> #ifndef P_SPORT2_TFS
> #define P_SPORT2_TFS P_UNDEF
> diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
> index e222462..d9f8632 100644
> --- a/arch/blackfin/mach-bf548/include/mach/portmux.h
> +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
> @@ -7,8 +7,6 @@
> #ifndef _MACH_PORTMUX_H_
> #define _MACH_PORTMUX_H_
>
> -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
> -
> #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
> #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
> #define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
> diff --git a/arch/blackfin/mach-bf609/include/mach/portmux.h b/arch/blackfin/mach-bf609/include/mach/portmux.h
> index 2e1a51c..fe34191 100644
> --- a/arch/blackfin/mach-bf609/include/mach/portmux.h
> +++ b/arch/blackfin/mach-bf609/include/mach/portmux.h
> @@ -7,8 +7,6 @@
> #ifndef _MACH_PORTMUX_H_
> #define _MACH_PORTMUX_H_
>
> -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
> -
> /* EMAC RMII Port Mux */
> #define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
> #define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
> --
> 1.8.2.3
>
>
On Tue, Sep 3, 2013 at 10:29 AM, Sonic Zhang <[email protected]> wrote:
> From: Sonic Zhang <[email protected]>
>
> - Remove non gpio lib code from blackfin architecture.
> - Limit the lagecy blackfin gpio driver to bf5xx processors only.
> - Remove unused definition of the pint power functions.
>
> Signed-off-by: Sonic Zhang <[email protected]>
> Acked-by: Linus Walleij <[email protected]>
Hi Sonic, I tried to apply this but it doesn't apply cleanly on
my pinctrl "devel" branch based off v3.12-rc1.
Can you rebase patch 2+3 and resend?
Yours,
Linus Walleij
Hi Linus,
On Mon, Sep 23, 2013 at 3:48 PM, Linus Walleij <[email protected]> wrote:
> On Tue, Sep 3, 2013 at 10:29 AM, Sonic Zhang <[email protected]> wrote:
>
>> From: Sonic Zhang <[email protected]>
>>
>> - Remove non gpio lib code from blackfin architecture.
>> - Limit the lagecy blackfin gpio driver to bf5xx processors only.
>> - Remove unused definition of the pint power functions.
>>
>> Signed-off-by: Sonic Zhang <[email protected]>
>> Acked-by: Linus Walleij <[email protected]>
>
> Hi Sonic, I tried to apply this but it doesn't apply cleanly on
> my pinctrl "devel" branch based off v3.12-rc1.
>
> Can you rebase patch 2+3 and resend?
The patch 2 is already in your "devel" branch of kernel v3.12-rc1.
Please apply patch 3 only.
Thanks
Sonic
On Tue, Sep 3, 2013 at 10:29 AM, Sonic Zhang <[email protected]> wrote:
> From: Sonic Zhang <[email protected]>
>
> - Remove unused macro MAX_RESOURCES
> - Override blackfin legacy peripheral pinmux request and free APIs by
> devm_pinctrl_get_select_default() to init the peripheral portmux setting.
>
> v3-chagnes:
> - Move pinctrl soc data out of blackfin arch folder.
>
> Signed-off-by: Sonic Zhang <[email protected]>
Patch applied with Steven's ACK.
Yours,
Linus Walleij
On Mon, Sep 23, 2013 at 10:17 AM, Sonic Zhang <[email protected]> wrote:
> On Mon, Sep 23, 2013 at 3:48 PM, Linus Walleij <[email protected]> wrote:
>> Hi Sonic, I tried to apply this but it doesn't apply cleanly on
>> my pinctrl "devel" branch based off v3.12-rc1.
>>
>> Can you rebase patch 2+3 and resend?
>
> The patch 2 is already in your "devel" branch of kernel v3.12-rc1.
> Please apply patch 3 only.
Yes sorry I was confusing myself by missing to check my own trees,
what a mess. Applied #3 now.
Yours,
Linus Walleij