Since there may be other clocksources available, this driver should not
trigger a panic simply because it can not determine the frequency of an
external clock. This change refactors the driver to allow a warning to
be printed in this case instead.
Signed-off-by: Tim Kryger <[email protected]>
Reviewed-by: Markus Mayer <[email protected]>
Reviewed-by: Matt Porter <[email protected]>
---
Changes since v1:
- Rebased on v3.14-rc1
drivers/clocksource/bcm_kona_timer.c | 54 +++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 974b2db..0595dc6 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -99,31 +99,6 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
return;
}
-static void __init kona_timers_init(struct device_node *node)
-{
- u32 freq;
- struct clk *external_clk;
-
- external_clk = of_clk_get_by_name(node, NULL);
-
- if (!IS_ERR(external_clk)) {
- arch_timer_rate = clk_get_rate(external_clk);
- clk_prepare_enable(external_clk);
- } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
- arch_timer_rate = freq;
- } else {
- panic("unable to determine clock-frequency");
- }
-
- /* Setup IRQ numbers */
- timers.tmr_irq = irq_of_parse_and_map(node, 0);
-
- /* Setup IO addresses */
- timers.tmr_regs = of_iomap(node, 0);
-
- kona_timer_disable_and_clear(timers.tmr_regs);
-}
-
static int kona_timer_set_next_event(unsigned long clc,
struct clock_event_device *unused)
{
@@ -198,7 +173,34 @@ static struct irqaction kona_timer_irq = {
static void __init kona_timer_init(struct device_node *node)
{
- kona_timers_init(node);
+ u32 freq;
+ struct clk *external_clk;
+
+ if (!of_device_is_available(node)) {
+ pr_info("Kona Timer v1 marked as disabled in device tree\n");
+ return;
+ }
+
+ external_clk = of_clk_get_by_name(node, NULL);
+
+ if (!IS_ERR(external_clk)) {
+ arch_timer_rate = clk_get_rate(external_clk);
+ clk_prepare_enable(external_clk);
+ } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+ arch_timer_rate = freq;
+ } else {
+ pr_err("Kona Timer v1 unable to determine clock-frequency");
+ return;
+ }
+
+ /* Setup IRQ numbers */
+ timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+ /* Setup IO addresses */
+ timers.tmr_regs = of_iomap(node, 0);
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
--
1.8.0.1
Commit-ID: ad037c1f4ae6f9258f27fddb679ceb703ff07a88
Gitweb: http://git.kernel.org/tip/ad037c1f4ae6f9258f27fddb679ceb703ff07a88
Author: Tim Kryger <[email protected]>
AuthorDate: Tue, 4 Feb 2014 16:15:04 -0800
Committer: Thomas Gleixner <[email protected]>
CommitDate: Thu, 6 Feb 2014 16:01:40 +0100
clocksource: Kona: Print warning rather than panic
Since there may be other clocksources available, this driver should not
trigger a panic simply because it can not determine the frequency of an
external clock. This change refactors the driver to allow a warning to
be printed in this case instead.
Signed-off-by: Tim Kryger <[email protected]>
Reviewed-by: Markus Mayer <[email protected]>
Reviewed-by: Matt Porter <[email protected]>
Cc: Christian Daudt <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
---
drivers/clocksource/bcm_kona_timer.c | 54 +++++++++++++++++++-----------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 974b2db..0595dc6 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -99,31 +99,6 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
return;
}
-static void __init kona_timers_init(struct device_node *node)
-{
- u32 freq;
- struct clk *external_clk;
-
- external_clk = of_clk_get_by_name(node, NULL);
-
- if (!IS_ERR(external_clk)) {
- arch_timer_rate = clk_get_rate(external_clk);
- clk_prepare_enable(external_clk);
- } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
- arch_timer_rate = freq;
- } else {
- panic("unable to determine clock-frequency");
- }
-
- /* Setup IRQ numbers */
- timers.tmr_irq = irq_of_parse_and_map(node, 0);
-
- /* Setup IO addresses */
- timers.tmr_regs = of_iomap(node, 0);
-
- kona_timer_disable_and_clear(timers.tmr_regs);
-}
-
static int kona_timer_set_next_event(unsigned long clc,
struct clock_event_device *unused)
{
@@ -198,7 +173,34 @@ static struct irqaction kona_timer_irq = {
static void __init kona_timer_init(struct device_node *node)
{
- kona_timers_init(node);
+ u32 freq;
+ struct clk *external_clk;
+
+ if (!of_device_is_available(node)) {
+ pr_info("Kona Timer v1 marked as disabled in device tree\n");
+ return;
+ }
+
+ external_clk = of_clk_get_by_name(node, NULL);
+
+ if (!IS_ERR(external_clk)) {
+ arch_timer_rate = clk_get_rate(external_clk);
+ clk_prepare_enable(external_clk);
+ } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+ arch_timer_rate = freq;
+ } else {
+ pr_err("Kona Timer v1 unable to determine clock-frequency");
+ return;
+ }
+
+ /* Setup IRQ numbers */
+ timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+ /* Setup IO addresses */
+ timers.tmr_regs = of_iomap(node, 0);
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);