This is the start of the review cycle for the Linux 3.5.7.31 stable kernel.
This version contains 60 new patches, summarized below. The new patches are
posted as replies to this message and also available in this git branch:
http://kernel.ubuntu.com/git?p=ubuntu/linux.git;h=linux-3.5.y-review;a=shortlog
git://kernel.ubuntu.com/ubuntu/linux.git linux-3.5.y-review
The review period for version 3.5.7.31 will be open for the next three days.
To report a problem, please reply to the relevant follow-up patch message.
For more information about the Linux 3.5.y.z extended stable kernel version,
see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable .
-Luis
--
arch/s390/crypto/aes_s390.c | 65 ++++++++++-----
arch/s390/crypto/des_s390.c | 95 ++++++++++++++--------
arch/s390/kernel/head64.S | 7 +-
arch/s390/mm/page-states.c | 10 +++
block/blk-lib.c | 8 ++
drivers/ata/ahci.c | 12 +--
drivers/block/xen-blkfront.c | 5 +-
drivers/char/raw.c | 2 +-
drivers/edac/edac_mc.c | 11 ++-
drivers/gpu/drm/mgag200/mgag200_mode.c | 4 +-
drivers/infiniband/hw/qib/qib_iba7322.c | 5 ++
drivers/md/Kconfig | 4 +
drivers/md/Makefile | 1 +
drivers/md/dm-builtin.c | 50 ++++++++++++
drivers/md/dm-sysfs.c | 5 --
drivers/md/dm.c | 26 ++----
drivers/md/dm.h | 17 +++-
drivers/md/raid5.c | 90 ++++++++++-----------
drivers/media/dvb/dvb-usb/mxl111sf-tuner.h | 2 +-
drivers/media/dvb/dvb-usb/mxl111sf.c | 2 +-
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 8 +-
drivers/net/wireless/ath/ath9k/init.c | 8 +-
drivers/pci/pci.c | 17 ++--
drivers/pinctrl/core.c | 6 +-
drivers/power/max17040_battery.c | 5 +-
drivers/rtc/rtc-cmos.c | 52 +++++++++++-
drivers/spi/spi-nuc900.c | 2 +
drivers/staging/comedi/drivers/adv_pci1710.c | 17 ++--
drivers/staging/iio/adc/ad799x_core.c | 3 +-
drivers/staging/iio/magnetometer/ak8975.c | 16 ++--
drivers/tty/n_gsm.c | 11 +++
drivers/usb/host/xhci-pci.c | 5 ++
drivers/usb/serial/ftdi_sio.c | 3 +
drivers/usb/serial/ftdi_sio_ids.h | 7 ++
drivers/usb/serial/option.c | 3 +-
drivers/usb/storage/Kconfig | 4 +-
drivers/usb/storage/scsiglue.c | 6 ++
drivers/usb/storage/unusual_cypress.h | 2 +-
drivers/usb/storage/unusual_devs.h | 7 ++
drivers/vme/bridges/vme_ca91cx42.c | 4 +-
fs/buffer.c | 6 +-
fs/file.c | 2 +-
fs/lockd/svclock.c | 8 ++
include/linux/sched.h | 1 +
kernel/irq/irqdesc.c | 1 +
kernel/printk.c | 1 -
kernel/sched/core.c | 3 -
kernel/sched/fair.c | 7 +-
kernel/sched/rt.c | 20 ++++-
kernel/sched/sched.h | 1 -
kernel/time/jiffies.c | 6 ++
kernel/time/timekeeping.c | 14 ++--
kernel/trace/ftrace.c | 112 +++++++++++++++++++++-----
kernel/trace/ring_buffer.c | 7 ++
lib/Makefile | 1 +
mm/page-writeback.c | 5 +-
mm/swapfile.c | 11 ++-
net/mac80211/tx.c | 2 +-
scripts/mod/file2alias.c | 4 +-
security/selinux/ss/services.c | 4 +
sound/pci/hda/patch_analog.c | 6 ++
sound/usb/Kconfig | 1 +
virt/kvm/coalesced_mmio.c | 8 +-
63 files changed, 617 insertions(+), 221 deletions(-)
Alan Stern (3):
usb-storage: restrict bcdDevice range for Super Top in Cypress ATACB
usb-storage: add unusual-devs entry for BlackBerry 9000
usb-storage: enable multi-LUN scanning when needed
Axel Lin (1):
spi: nuc900: Set SPI_LSB_FIRST for master->mode_bits if hw->pdata->lsb is true
Beomho Seo (1):
iio: ak8975: Fix calculation formula for convert micro tesla to gauss unit
Bjørn Mork (1):
usb: ftdi_sio: add Mindstorms EV3 console adapter
Borislav Petkov (2):
rtc-cmos: Add an alarm disable quirk
EDAC: Correct workqueue setup path
Colin Cross (1):
timekeeping: fix 32-bit overflow in get_monotonic_boottime
Dan Carpenter (1):
KVM: return an error code in kvm_vm_ioctl_register_coalesced_mmio()
Dave Airlie (1):
drm/mgag200: fix typo causing bw limits to be ignored on some chips
Dave Jones (2):
[media] mxl111sf: Fix unintentional garbage stack read
[media] mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unset
David Vrabel (1):
xen-blkfront: handle backend CLOSED without CLOSING
Eric W. Biederman (1):
fs/file.c:fdtable: avoid triggering OOMs from alloc_fdmem
Florian Vaussard (1):
pinctrl: do not init debugfs entries for unimplemented functionalities
George Spelvin (1):
ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
H Hartley Sweeten (1):
staging: comedi: adv_pci1710: fix analog output readback value
Harald Freudenberger (3):
crypto: s390 - fix concurrency issue in aes-ctr mode
crypto: s390 - fix des and des3_ede cbc concurrency issue
crypto: s390 - fix des and des3_ede ctr concurrency issue
Hartmut Knaack (1):
staging:iio:ad799x fix error_free_irq which was freeing an irq that may not have been requested
Jan Moskyto Matejka (1):
Modpost: fixed USB alias generation for ranges including 0x9 and 0xA
Jens Axboe (1):
block: add cond_resched() to potentially long running ioctl discard loop
Johannes Berg (1):
mac80211: fix fragmentation code, particularly for encryption
John Stultz (1):
timekeeping: Avoid possible deadlock from clock_was_set_delayed
KOSAKI Motohiro (2):
mm: __set_page_dirty_nobuffers() uses spin_lock_irqsave() instead of spin_lock_irq()
mm: __set_page_dirty uses spin_lock_irqsave instead of spin_lock_irq
Krzysztof Kozlowski (1):
power: max17040: Fix NULL pointer dereference when there is no platform_data
Lars Poeschel (1):
tty: n_gsm: Fix for modems with brk in modem status control
Martin Schwidefsky (1):
s390: fix kernel crash due to linkage stack instructions
Martyn Welch (1):
VME: Correct read/write alignment algorithm
Michael Holzheu (1):
s390/dump: Fix dump memory detection
Mike Galbraith (1):
sched,rt: fix isolated CPUs leaving root_task_group indefinitely throttled
Mike Marciniszyn (1):
IB/qib: Add missing serdes init sequence
Mikulas Patocka (2):
time: Fix overflow when HZ is smaller than 60
dm sysfs: fix a module unload race
Myron Stowe (1):
ahci: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b
NeilBrown (1):
lockd: send correct lock when granting a delayed lock.
Oleg Nesterov (1):
md/raid5: Fix CPU hotplug callback registration
Oleksij Rempel (1):
ath9k_htc: Do not support PowerSave by default
Paul Bolle (1):
raw: test against runtime value of max_raw_minors
Paul E. McKenney (1):
printk: Fix scheduling-while-atomic problem in console_cpu_notify()
Paul Gortmaker (1):
genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n
Peter Boonstoppel (1):
sched: Unthrottle rt runqueues in __disable_runtime()
Peter Oberparleiter (1):
x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y
Raymond Wanyoike (1):
usb: option: blacklist ZTE MF667 net interface
Sarah Sharp (1):
xhci: Fix resume issues on Renesas chips in Samsung laptops
Stephen Smalley (1):
SELinux: Fix kernel BUG on empty security contexts.
Steven Rostedt (1):
ftrace: Synchronize setting function_trace_op with ftrace_trace_function
Steven Rostedt (Red Hat) (3):
ftrace: Fix synchronization location disabling and freeing ftrace_ops
ftrace: Have function graph only trace based on global_ops filters
ring-buffer: Fix first commit on sub-buffer having non-zero delta
Sujith Manoharan (1):
ath9k: Do not support PowerSave by default
Takashi Iwai (2):
ALSA: usb-audio: Add missing kconfig dependecy
ALSA: hda - Improve loopback path lookups for AD1983
Ulrich Hahn (1):
USB: ftdi_sio: add Tagsys RFID Reader IDs
Weijie Yang (1):
mm/swap: fix race on swap_info reuse between swapoff and swapon
Yijing Wang (1):
PCI: Enable ARI if dev and upstream bridge support it; disable otherwise
Ying Xue (1):
sched/rt: Avoid updating RT entry timeout twice within one tick period
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Harald Freudenberger <[email protected]>
commit 0519e9ad89e5cd6e6b08398f57c6a71d9580564c upstream.
The aes-ctr mode uses one preallocated page without any concurrency
protection. When multiple threads run aes-ctr encryption or decryption
this can lead to data corruption.
The patch introduces locking for the page and a fallback solution with
slower en/decryption performance in concurrency situations.
Signed-off-by: Harald Freudenberger <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/s390/crypto/aes_s390.c | 65 ++++++++++++++++++++++++++++++++-------------
1 file changed, 46 insertions(+), 19 deletions(-)
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index f3000a4..51fb1ef 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -25,6 +25,7 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/spinlock.h>
#include "crypt_s390.h"
#define AES_KEYLEN_128 1
@@ -32,6 +33,7 @@
#define AES_KEYLEN_256 4
static u8 *ctrblk;
+static DEFINE_SPINLOCK(ctrblk_lock);
static char keylen_flag;
struct s390_aes_ctx {
@@ -760,43 +762,67 @@ static int ctr_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
return aes_set_key(tfm, in_key, key_len);
}
+static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes)
+{
+ unsigned int i, n;
+
+ /* only use complete blocks, max. PAGE_SIZE */
+ n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(AES_BLOCK_SIZE - 1);
+ for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) {
+ memcpy(ctrptr + i, ctrptr + i - AES_BLOCK_SIZE,
+ AES_BLOCK_SIZE);
+ crypto_inc(ctrptr + i, AES_BLOCK_SIZE);
+ }
+ return n;
+}
+
static int ctr_aes_crypt(struct blkcipher_desc *desc, long func,
struct s390_aes_ctx *sctx, struct blkcipher_walk *walk)
{
int ret = blkcipher_walk_virt_block(desc, walk, AES_BLOCK_SIZE);
- unsigned int i, n, nbytes;
- u8 buf[AES_BLOCK_SIZE];
- u8 *out, *in;
+ unsigned int n, nbytes;
+ u8 buf[AES_BLOCK_SIZE], ctrbuf[AES_BLOCK_SIZE];
+ u8 *out, *in, *ctrptr = ctrbuf;
if (!walk->nbytes)
return ret;
- memcpy(ctrblk, walk->iv, AES_BLOCK_SIZE);
+ if (spin_trylock(&ctrblk_lock))
+ ctrptr = ctrblk;
+
+ memcpy(ctrptr, walk->iv, AES_BLOCK_SIZE);
while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
while (nbytes >= AES_BLOCK_SIZE) {
- /* only use complete blocks, max. PAGE_SIZE */
- n = (nbytes > PAGE_SIZE) ? PAGE_SIZE :
- nbytes & ~(AES_BLOCK_SIZE - 1);
- for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) {
- memcpy(ctrblk + i, ctrblk + i - AES_BLOCK_SIZE,
- AES_BLOCK_SIZE);
- crypto_inc(ctrblk + i, AES_BLOCK_SIZE);
- }
- ret = crypt_s390_kmctr(func, sctx->key, out, in, n, ctrblk);
- if (ret < 0 || ret != n)
+ if (ctrptr == ctrblk)
+ n = __ctrblk_init(ctrptr, nbytes);
+ else
+ n = AES_BLOCK_SIZE;
+ ret = crypt_s390_kmctr(func, sctx->key, out, in,
+ n, ctrptr);
+ if (ret < 0 || ret != n) {
+ if (ctrptr == ctrblk)
+ spin_unlock(&ctrblk_lock);
return -EIO;
+ }
if (n > AES_BLOCK_SIZE)
- memcpy(ctrblk, ctrblk + n - AES_BLOCK_SIZE,
+ memcpy(ctrptr, ctrptr + n - AES_BLOCK_SIZE,
AES_BLOCK_SIZE);
- crypto_inc(ctrblk, AES_BLOCK_SIZE);
+ crypto_inc(ctrptr, AES_BLOCK_SIZE);
out += n;
in += n;
nbytes -= n;
}
ret = blkcipher_walk_done(desc, walk, nbytes);
}
+ if (ctrptr == ctrblk) {
+ if (nbytes)
+ memcpy(ctrbuf, ctrptr, AES_BLOCK_SIZE);
+ else
+ memcpy(walk->iv, ctrptr, AES_BLOCK_SIZE);
+ spin_unlock(&ctrblk_lock);
+ }
/*
* final block may be < AES_BLOCK_SIZE, copy only nbytes
*/
@@ -804,14 +830,15 @@ static int ctr_aes_crypt(struct blkcipher_desc *desc, long func,
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
ret = crypt_s390_kmctr(func, sctx->key, buf, in,
- AES_BLOCK_SIZE, ctrblk);
+ AES_BLOCK_SIZE, ctrbuf);
if (ret < 0 || ret != AES_BLOCK_SIZE)
return -EIO;
memcpy(out, buf, nbytes);
- crypto_inc(ctrblk, AES_BLOCK_SIZE);
+ crypto_inc(ctrbuf, AES_BLOCK_SIZE);
ret = blkcipher_walk_done(desc, walk, 0);
+ memcpy(walk->iv, ctrbuf, AES_BLOCK_SIZE);
}
- memcpy(walk->iv, ctrblk, AES_BLOCK_SIZE);
+
return ret;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Oberparleiter <[email protected]>
commit 6583327c4dd55acbbf2a6f25e775b28b3abf9a42 upstream.
Commit d61931d89b, "x86: Add optimized popcnt variants" introduced
compile flag -fcall-saved-rdi for lib/hweight.c. When combined with
options -fprofile-arcs and -O2, this flag causes gcc to generate
broken constructor code. As a result, a 64 bit x86 kernel compiled
with CONFIG_GCOV_PROFILE_ALL=y prints message "gcov: could not create
file" and runs into sproadic BUGs during boot.
The gcc people indicate that these kinds of problems are endemic when
using ad hoc calling conventions. It is therefore best to treat any
file compiled with ad hoc calling conventions as an isolated
environment and avoid things like profiling or coverage analysis,
since those subsystems assume a "normal" calling conventions.
This patch avoids the bug by excluding lib/hweight.o from coverage
profiling.
Reported-by: Meelis Roos <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Peter Oberparleiter <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
lib/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/lib/Makefile b/lib/Makefile
index 8c31a0c..f1ab4e00 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o
lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
+GCOV_PROFILE_hweight.o := n
CFLAGS_hweight.o = $(subst $(quote),,$(CONFIG_ARCH_HWEIGHT_CFLAGS))
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt <[email protected]>
commit 405e1d834807e51b2ebd3dea81cb51e53fb61504 upstream.
[ Partial commit backported to 3.4. The ftrace_sync() code by this is
required for other fixes that 3.4 needs. ]
ftrace_trace_function is a variable that holds what function will be called
directly by the assembly code (mcount). If just a single function is
registered and it handles recursion itself, then the assembly will call that
function directly without any helper function. It also passes in the
ftrace_op that was registered with the callback. The ftrace_op to send is
stored in the function_trace_op variable.
The ftrace_trace_function and function_trace_op needs to be coordinated such
that the called callback wont be called with the wrong ftrace_op, otherwise
bad things can happen if it expected a different op. Luckily, there's no
callback that doesn't use the helper functions that requires this. But
there soon will be and this needs to be fixed.
Use a set_function_trace_op to store the ftrace_op to set the
function_trace_op to when it is safe to do so (during the update function
within the breakpoint or stop machine calls). Or if dynamic ftrace is not
being used (static tracing) then we have to do a bit more synchronization
when the ftrace_trace_function is set as that takes affect immediately
(as oppose to dynamic ftrace doing it with the modification of the trampoline).
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/trace/ftrace.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 524243e..6aa8159 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -222,6 +222,23 @@ static void update_global_ops(void)
global_ops.func = func;
}
+static void ftrace_sync(struct work_struct *work)
+{
+ /*
+ * This function is just a stub to implement a hard force
+ * of synchronize_sched(). This requires synchronizing
+ * tasks even in userspace and idle.
+ *
+ * Yes, function tracing is rude.
+ */
+}
+
+static void ftrace_sync_ipi(void *data)
+{
+ /* Probably not needed, but do it anyway */
+ smp_rmb();
+}
+
static void update_ftrace_function(void)
{
ftrace_func_t func;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Holzheu <[email protected]>
commit d7736ff5be31edaa4fe5ab62810c64529a24b149 upstream.
Dumps created by kdump or zfcpdump can contain invalid memory holes when
dumping z/VM systems that have memory pressure.
For example:
# zgetdump -i /proc/vmcore.
Memory map:
0000000000000000 - 0000000000bfffff (12 MB)
0000000000e00000 - 00000000014fffff (7 MB)
000000000bd00000 - 00000000f3bfffff (3711 MB)
The memory detection function find_memory_chunks() issues tprot to
find valid memory chunks. In case of CMM it can happen that pages are
marked as unstable via set_page_unstable() in arch_free_page().
If z/VM has released that pages, tprot returns -EFAULT and indicates
a memory hole.
So fix this and switch off CMM in case of kdump or zfcpdump.
Signed-off-by: Michael Holzheu <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/s390/mm/page-states.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
index a90d45e..27c50f4 100644
--- a/arch/s390/mm/page-states.c
+++ b/arch/s390/mm/page-states.c
@@ -12,6 +12,8 @@
#include <linux/mm.h>
#include <linux/gfp.h>
#include <linux/init.h>
+#include <asm/setup.h>
+#include <asm/ipl.h>
#define ESSA_SET_STABLE 1
#define ESSA_SET_UNUSED 2
@@ -41,6 +43,14 @@ void __init cmma_init(void)
if (!cmma_flag)
return;
+ /*
+ * Disable CMM for dump, otherwise the tprot based memory
+ * detection can fail because of unstable pages.
+ */
+ if (OLDMEM_BASE || ipl_info.type == IPL_TYPE_FCP_DUMP) {
+ cmma_flag = 0;
+ return;
+ }
asm volatile(
" .insn rrf,0xb9ab0000,%1,%1,0,0\n"
"0: la %0,0\n"
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 80d767d770fd9c697e434fd080c2db7b5c60c6dd upstream.
When compiling for the IA-64 ski emulator, HZ is set to 32 because the
emulation is slow and we don't want to waste too many cycles processing
timers. Alpha also has an option to set HZ to 32.
This causes integer underflow in
kernel/time/jiffies.c:
kernel/time/jiffies.c:66:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
.mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
^
This patch reduces the JIFFIES_SHIFT value to avoid the overflow.
Signed-off-by: Mikulas Patocka <[email protected]>
Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1401241639100.23871@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/time/jiffies.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index a470154..955560e 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -51,7 +51,13 @@
* HZ shrinks, so values greater than 8 overflow 32bits when
* HZ=100.
*/
+#if HZ < 34
+#define JIFFIES_SHIFT 6
+#elif HZ < 67
+#define JIFFIES_SHIFT 7
+#else
#define JIFFIES_SHIFT 8
+#endif
static cycle_t jiffies_read(struct clocksource *cs)
{
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Raymond Wanyoike <[email protected]>
commit 3635c7e2d59f7861afa6fa5e87e2a58860ff514d upstream.
Interface #5 of 19d2:1270 is a net interface which has been submitted to the
qmi_wwan driver so consequently remove it from the option driver.
Signed-off-by: Raymond Wanyoike <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/serial/option.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 83b50db..e681037 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1376,7 +1376,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit cb6ef42e516cb8948f15e4b70dc03af8020050a2 upstream.
We're using edac_mc_workq_setup() both on the init path, when
we load an edac driver and when we change the polling period
(edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec.
On that second path we don't need to init the workqueue which has been
initialized already.
Thanks to Tejun for workqueue insights.
Signed-off-by: Borislav Petkov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/edac/edac_mc.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index de5ba86e..5d4321e 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -483,7 +483,8 @@ static void edac_mc_workq_function(struct work_struct *work_req)
*
* called with the mem_ctls_mutex held
*/
-static void edac_mc_workq_setup(struct mem_ctl_info *mci, unsigned msec)
+static void edac_mc_workq_setup(struct mem_ctl_info *mci, unsigned msec,
+ bool init)
{
debugf0("%s()\n", __func__);
@@ -491,7 +492,9 @@ static void edac_mc_workq_setup(struct mem_ctl_info *mci, unsigned msec)
if (mci->op_state != OP_RUNNING_POLL)
return;
- INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function);
+ if (init)
+ INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function);
+
queue_delayed_work(edac_workqueue, &mci->work, msecs_to_jiffies(msec));
}
@@ -551,7 +554,7 @@ void edac_mc_reset_delay_period(int value)
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
- edac_mc_workq_setup(mci, (unsigned long) value);
+ edac_mc_workq_setup(mci, (unsigned long) value, false);
}
mutex_unlock(&mem_ctls_mutex);
@@ -700,7 +703,7 @@ int edac_mc_add_mc(struct mem_ctl_info *mci)
/* This instance is NOW RUNNING */
mci->op_state = OP_RUNNING_POLL;
- edac_mc_workq_setup(mci, edac_mc_get_poll_msec());
+ edac_mc_workq_setup(mci, edac_mc_get_poll_msec(), true);
} else {
mci->op_state = OP_RUNNING_INTERRUPT;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Marciniszyn <[email protected]>
commit 2f75e12c4457a9b3d042c0a0d748fa198dc2ffaf upstream.
Research has shown that commit a77fcf895046 ("IB/qib: Use a single
txselect module parameter for serdes tuning") missed a key serdes init
sequence.
This patch add that sequence.
Reviewed-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Roland Dreier <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/infiniband/hw/qib/qib_iba7322.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index c881e74..a7bbde9 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -2279,6 +2279,11 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
qib_write_kreg(dd, kr_scratch, 0ULL);
+ /* ensure previous Tx parameters are not still forced */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
+
if (qib_compat_ddr_negotiate) {
ppd->cpspec->ibdeltainprog = 1;
ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <[email protected]>
commit c8123f8c9cb517403b51aa41c3c46ff5e10b2c17 upstream.
When mkfs issues a full device discard and the device only
supports discards of a smallish size, we can loop in
blkdev_issue_discard() for a long time. If preempt isn't enabled,
this can turn into a softlock situation and the kernel will
start complaining.
Add an explicit cond_resched() at the end of the loop to avoid
that.
Signed-off-by: Jens Axboe <[email protected]>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
block/blk-lib.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 2b461b4..36751e2 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -101,6 +101,14 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
atomic_inc(&bb.done);
submit_bio(type, bio);
+
+ /*
+ * We can loop for a long time in here, if someone does
+ * full device discards (like mkfs). Be nice and allow
+ * us to schedule out to avoid softlocking if preempt
+ * is disabled.
+ */
+ cond_resched();
}
/* Wait for bios in-flight */
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Schwidefsky <[email protected]>
commit 8d7f6690cedb83456edd41c9bd583783f0703bf0 upstream.
The kernel currently crashes with a low-address-protection exception
if a user space process executes an instruction that tries to use the
linkage stack. Set the base-ASTE origin and the subspace-ASTE origin
of the dispatchable-unit-control-table to point to a dummy ASTE.
Set up control register 15 to point to an empty linkage stack with no
room left.
A user space process with a linkage stack instruction will still crash
but with a different exception which is correctly translated to a
segmentation fault instead of a kernel oops.
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/s390/kernel/head64.S | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index 99348c0..78be245 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -61,7 +61,7 @@ ENTRY(startup_continue)
.quad 0 # cr12: tracing off
.quad 0 # cr13: home space segment table
.quad 0xc0000000 # cr14: machine check handling off
- .quad 0 # cr15: linkage stack operations
+ .quad .Llinkage_stack # cr15: linkage stack operations
.Lpcmsk:.quad 0x0000000180000000
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
@@ -69,12 +69,15 @@ ENTRY(startup_continue)
.Lparmaddr:
.quad PARMAREA
.align 64
-.Lduct: .long 0,0,0,0,.Lduald,0,0,0
+.Lduct: .long 0,.Laste,.Laste,0,.Lduald,0,0,0
.long 0,0,0,0,0,0,0,0
+.Laste: .quad 0,0xffffffffffffffff,0,0,0,0,0,0
.align 128
.Lduald:.rept 8
.long 0x80000000,0,0,0 # invalid access-list entries
.endr
+.Llinkage_stack:
+ .long 0,0,0x89000000,0,0,0,0x8a000000,0
ENTRY(_ehead)
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 2ec197db1a56c9269d75e965f14c344b58b2a4f6 upstream.
If an NFS client attempts to get a lock (using NLM) and the lock is
not available, the server will remember the request and when the lock
becomes available it will send a GRANT request to the client to
provide the lock.
If the client already held an adjacent lock, the GRANT callback will
report the union of the existing and new locks, which can confuse the
client.
This happens because __posix_lock_file (called by vfs_lock_file)
updates the passed-in file_lock structure when adjacent or
over-lapping locks are found.
To avoid this problem we take a copy of the two fields that can
be changed (fl_start and fl_end) before the call and restore them
afterwards.
An alternate would be to allocate a 'struct file_lock', initialise it,
use locks_copy_lock() to take a copy, then locks_release_private()
after the vfs_lock_file() call. But that is a lot more work.
Reported-by: Olaf Kirch <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
--
v1 had a couple of issues (large on-stack struct and didn't really work properly).
This version is much better tested.
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/lockd/svclock.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c
index aff1c61..43ccfd6 100644
--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -769,6 +769,7 @@ nlmsvc_grant_blocked(struct nlm_block *block)
struct nlm_file *file = block->b_file;
struct nlm_lock *lock = &block->b_call->a_args.lock;
int error;
+ loff_t fl_start, fl_end;
dprintk("lockd: grant blocked lock %p\n", block);
@@ -786,9 +787,16 @@ nlmsvc_grant_blocked(struct nlm_block *block)
}
/* Try the lock operation again */
+ /* vfs_lock_file() can mangle fl_start and fl_end, but we need
+ * them unchanged for the GRANT_MSG
+ */
lock->fl.fl_flags |= FL_SLEEP;
+ fl_start = lock->fl.fl_start;
+ fl_end = lock->fl.fl_end;
error = vfs_lock_file(file->f_file, F_SETLK, &lock->fl, NULL);
lock->fl.fl_flags &= ~FL_SLEEP;
+ lock->fl.fl_start = fl_start;
+ lock->fl.fl_end = fl_end;
switch (error) {
case 0:
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 2995fa78e423d7193f3b57835f6c1c75006a0315 upstream.
This reverts commit be35f48610 ("dm: wait until embedded kobject is
released before destroying a device") and provides an improved fix.
The kobject release code that calls the completion must be placed in a
non-module file, otherwise there is a module unload race (if the process
calling dm_kobject_release is preempted and the DM module unloaded after
the completion is triggered, but before dm_kobject_release returns).
To fix this race, this patch moves the completion code to dm-builtin.c
which is always compiled directly into the kernel if BLK_DEV_DM is
selected.
The patch introduces a new dm_kobject_holder structure, its purpose is
to keep the completion and kobject in one place, so that it can be
accessed from non-module code without the need to export the layout of
struct mapped_device to that code.
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
[ luis: backported to 3.5: used Mikula's 3.4 backport ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/Kconfig | 4 ++++
drivers/md/Makefile | 1 +
drivers/md/dm-builtin.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++
drivers/md/dm-sysfs.c | 5 -----
drivers/md/dm.c | 26 +++++--------------------
drivers/md/dm.h | 17 ++++++++++++++++-
6 files changed, 76 insertions(+), 27 deletions(-)
create mode 100644 drivers/md/dm-builtin.c
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 10f122a..da4dc25 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -185,8 +185,12 @@ config MD_FAULTY
In unsure, say N.
+config BLK_DEV_DM_BUILTIN
+ boolean
+
config BLK_DEV_DM
tristate "Device mapper support"
+ select BLK_DEV_DM_BUILTIN
---help---
Device-mapper is a low level volume manager. It works by allowing
people to specify mappings for ranges of logical sectors. Various
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 8b2e0df..4e87c54 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_MD_MULTIPATH) += multipath.o
obj-$(CONFIG_MD_FAULTY) += faulty.o
obj-$(CONFIG_BLK_DEV_MD) += md-mod.o
obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
+obj-$(CONFIG_BLK_DEV_DM_BUILTIN) += dm-builtin.o
obj-$(CONFIG_DM_BUFIO) += dm-bufio.o
obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
obj-$(CONFIG_DM_DELAY) += dm-delay.o
diff --git a/drivers/md/dm-builtin.c b/drivers/md/dm-builtin.c
new file mode 100644
index 0000000..797daec
--- /dev/null
+++ b/drivers/md/dm-builtin.c
@@ -0,0 +1,50 @@
+#include "dm.h"
+
+#include <linux/export.h>
+
+/*
+ * The kobject release method must not be placed in the module itself,
+ * otherwise we are subject to module unload races.
+ *
+ * The release method is called when the last reference to the kobject is
+ * dropped. It may be called by any other kernel code that drops the last
+ * reference.
+ *
+ * The release method suffers from module unload race. We may prevent the
+ * module from being unloaded at the start of the release method (using
+ * increased module reference count or synchronizing against the release
+ * method), however there is no way to prevent the module from being
+ * unloaded at the end of the release method.
+ *
+ * If this code were placed in the dm module, the following race may
+ * happen:
+ * 1. Some other process takes a reference to dm kobject
+ * 2. The user issues ioctl function to unload the dm device
+ * 3. dm_sysfs_exit calls kobject_put, however the object is not released
+ * because of the other reference taken at step 1
+ * 4. dm_sysfs_exit waits on the completion
+ * 5. The other process that took the reference in step 1 drops it,
+ * dm_kobject_release is called from this process
+ * 6. dm_kobject_release calls complete()
+ * 7. a reschedule happens before dm_kobject_release returns
+ * 8. dm_sysfs_exit continues, the dm device is unloaded, module reference
+ * count is decremented
+ * 9. The user unloads the dm module
+ * 10. The other process that was rescheduled in step 7 continues to run,
+ * it is now executing code in unloaded module, so it crashes
+ *
+ * Note that if the process that takes the foreign reference to dm kobject
+ * has a low priority and the system is sufficiently loaded with
+ * higher-priority processes that prevent the low-priority process from
+ * being scheduled long enough, this bug may really happen.
+ *
+ * In order to fix this module unload race, we place the release method
+ * into a helper code that is compiled directly into the kernel.
+ */
+
+void dm_kobject_release(struct kobject *kobj)
+{
+ complete(dm_get_completion_from_kobject(kobj));
+}
+
+EXPORT_SYMBOL(dm_kobject_release);
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index e0cc5d6..c62c5ab 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -79,11 +79,6 @@ static const struct sysfs_ops dm_sysfs_ops = {
.show = dm_attr_show,
};
-static void dm_kobject_release(struct kobject *kobj)
-{
- complete(dm_get_completion_from_kobject(kobj));
-}
-
/*
* dm kobject is embedded in mapped_device structure
* no need to define release function here
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 062f89a..f65ae26 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -191,11 +191,8 @@ struct mapped_device {
/* forced geometry settings */
struct hd_geometry geometry;
- /* sysfs handle */
- struct kobject kobj;
-
- /* wait until the kobject is released */
- struct completion kobj_completion;
+ /* kobject and completion */
+ struct dm_kobject_holder kobj_holder;
/* zero-length flush that will be cloned and submitted to targets */
struct bio flush_bio;
@@ -1901,7 +1898,7 @@ static struct mapped_device *alloc_dev(int minor)
init_waitqueue_head(&md->wait);
INIT_WORK(&md->work, dm_wq_work);
init_waitqueue_head(&md->eventq);
- init_completion(&md->kobj_completion);
+ init_completion(&md->kobj_holder.completion);
md->disk->major = _major;
md->disk->first_minor = minor;
@@ -2693,20 +2690,14 @@ struct gendisk *dm_disk(struct mapped_device *md)
struct kobject *dm_kobject(struct mapped_device *md)
{
- return &md->kobj;
+ return &md->kobj_holder.kobj;
}
-/*
- * struct mapped_device should not be exported outside of dm.c
- * so use this check to verify that kobj is part of md structure
- */
struct mapped_device *dm_get_from_kobject(struct kobject *kobj)
{
struct mapped_device *md;
- md = container_of(kobj, struct mapped_device, kobj);
- if (&md->kobj != kobj)
- return NULL;
+ md = container_of(kobj, struct mapped_device, kobj_holder.kobj);
if (test_bit(DMF_FREEING, &md->flags) ||
dm_deleting_md(md))
@@ -2716,13 +2707,6 @@ struct mapped_device *dm_get_from_kobject(struct kobject *kobj)
return md;
}
-struct completion *dm_get_completion_from_kobject(struct kobject *kobj)
-{
- struct mapped_device *md = container_of(kobj, struct mapped_device, kobj);
-
- return &md->kobj_completion;
-}
-
int dm_suspended_md(struct mapped_device *md)
{
return test_bit(DMF_SUSPENDED, &md->flags);
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 1174e96..9db80c9 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -16,6 +16,7 @@
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/completion.h>
+#include <linux/kobject.h>
/*
* Suspend feature flags
@@ -120,11 +121,25 @@ void dm_interface_exit(void);
/*
* sysfs interface
*/
+struct dm_kobject_holder {
+ struct kobject kobj;
+ struct completion completion;
+};
+
+static inline struct completion *dm_get_completion_from_kobject(struct kobject *kobj)
+{
+ return &container_of(kobj, struct dm_kobject_holder, kobj)->completion;
+}
+
int dm_sysfs_init(struct mapped_device *md);
void dm_sysfs_exit(struct mapped_device *md);
struct kobject *dm_kobject(struct mapped_device *md);
struct mapped_device *dm_get_from_kobject(struct kobject *kobj);
-struct completion *dm_get_completion_from_kobject(struct kobject *kobj);
+
+/*
+ * The kobject helper
+ */
+void dm_kobject_release(struct kobject *kobj);
/*
* Targets for linear and striped mappings
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <[email protected]>
commit 789b5e0315284463617e106baad360cb9e8db3ac upstream.
Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:
get_online_cpus();
for_each_online_cpu(cpu)
init_cpu(cpu);
register_cpu_notifier(&foobar_cpu_notifier);
put_online_cpus();
This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).
Interestingly, the raid5 code can actually prevent double initialization and
hence can use the following simplified form of callback registration:
register_cpu_notifier(&foobar_cpu_notifier);
get_online_cpus();
for_each_online_cpu(cpu)
init_cpu(cpu);
put_online_cpus();
A hotplug operation that occurs between registering the notifier and calling
get_online_cpus(), won't disrupt anything, because the code takes care to
perform the memory allocations only once.
So reorganize the code in raid5 this way to fix the deadlock with callback
registration.
Cc: [email protected]
Fixes: 36d1c6476be51101778882897b315bd928c8c7b5
Signed-off-by: Oleg Nesterov <[email protected]>
[Srivatsa: Fixed the unregister_cpu_notifier() deadlock, added the
free_scratch_buffer() helper to condense code further and wrote the changelog.]
Signed-off-by: Srivatsa S. Bhat <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/raid5.c | 90 ++++++++++++++++++++++++++----------------------------
1 file changed, 44 insertions(+), 46 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index eb0f9ea..a42eda2 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4737,23 +4737,43 @@ raid5_size(struct mddev *mddev, sector_t sectors, int raid_disks)
return sectors * (raid_disks - conf->max_degraded);
}
+static void free_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu)
+{
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ percpu->spare_page = NULL;
+ percpu->scribble = NULL;
+}
+
+static int alloc_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu)
+{
+ if (conf->level == 6 && !percpu->spare_page)
+ percpu->spare_page = alloc_page(GFP_KERNEL);
+ if (!percpu->scribble)
+ percpu->scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
+
+ if (!percpu->scribble || (conf->level == 6 && !percpu->spare_page)) {
+ free_scratch_buffer(conf, percpu);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
static void raid5_free_percpu(struct r5conf *conf)
{
- struct raid5_percpu *percpu;
unsigned long cpu;
if (!conf->percpu)
return;
- get_online_cpus();
- for_each_possible_cpu(cpu) {
- percpu = per_cpu_ptr(conf->percpu, cpu);
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
- }
#ifdef CONFIG_HOTPLUG_CPU
unregister_cpu_notifier(&conf->cpu_notify);
#endif
+
+ get_online_cpus();
+ for_each_possible_cpu(cpu)
+ free_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
put_online_cpus();
free_percpu(conf->percpu);
@@ -4779,15 +4799,7 @@ static int raid456_cpu_notify(struct notifier_block *nfb, unsigned long action,
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- if (conf->level == 6 && !percpu->spare_page)
- percpu->spare_page = alloc_page(GFP_KERNEL);
- if (!percpu->scribble)
- percpu->scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
-
- if (!percpu->scribble ||
- (conf->level == 6 && !percpu->spare_page)) {
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
+ if (alloc_scratch_buffer(conf, percpu)) {
pr_err("%s: failed memory allocation for cpu%ld\n",
__func__, cpu);
return notifier_from_errno(-ENOMEM);
@@ -4795,10 +4807,7 @@ static int raid456_cpu_notify(struct notifier_block *nfb, unsigned long action,
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
- percpu->spare_page = NULL;
- percpu->scribble = NULL;
+ free_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
break;
default:
break;
@@ -4810,40 +4819,29 @@ static int raid456_cpu_notify(struct notifier_block *nfb, unsigned long action,
static int raid5_alloc_percpu(struct r5conf *conf)
{
unsigned long cpu;
- struct page *spare_page;
- struct raid5_percpu __percpu *allcpus;
- void *scribble;
- int err;
+ int err = 0;
- allcpus = alloc_percpu(struct raid5_percpu);
- if (!allcpus)
+ conf->percpu = alloc_percpu(struct raid5_percpu);
+ if (!conf->percpu)
return -ENOMEM;
- conf->percpu = allcpus;
+
+#ifdef CONFIG_HOTPLUG_CPU
+ conf->cpu_notify.notifier_call = raid456_cpu_notify;
+ conf->cpu_notify.priority = 0;
+ err = register_cpu_notifier(&conf->cpu_notify);
+ if (err)
+ return err;
+#endif
get_online_cpus();
- err = 0;
for_each_present_cpu(cpu) {
- if (conf->level == 6) {
- spare_page = alloc_page(GFP_KERNEL);
- if (!spare_page) {
- err = -ENOMEM;
- break;
- }
- per_cpu_ptr(conf->percpu, cpu)->spare_page = spare_page;
- }
- scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
- if (!scribble) {
- err = -ENOMEM;
+ err = alloc_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
+ if (err) {
+ pr_err("%s: failed memory allocation for cpu%ld\n",
+ __func__, cpu);
break;
}
- per_cpu_ptr(conf->percpu, cpu)->scribble = scribble;
}
-#ifdef CONFIG_HOTPLUG_CPU
- conf->cpu_notify.notifier_call = raid456_cpu_notify;
- conf->cpu_notify.priority = 0;
- if (err == 0)
- err = register_cpu_notifier(&conf->cpu_notify);
-#endif
put_online_cpus();
return err;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Moskyto Matejka <[email protected]>
commit 03b56329f9bb5a1cb73d7dc659d529a9a9bf3acc upstream.
Commit afe2dab4f6 ("USB: add hex/bcd detection to usb modalias generation")
changed the routine that generates alias ranges. Before that change, only
digits 0-9 were supported; the commit tried to fix the case when the range
includes higher values than 0x9.
Unfortunately, the commit didn't fix the case when the range includes both
0x9 and 0xA, meaning that the final range must look like [x-9A-y] where
x <= 0x9 and y >= 0xA -- instead the [x-9A-x] range was produced.
Modprobe doesn't complain as it sees no difference between no-match and
bad-pattern results of fnmatch().
Fixing this simple bug to fix the aliases.
Also changing the hardcoded beginning of the range to uppercase as all the
other letters are also uppercase in the device version numbers.
Fortunately, this affects only the dvb-usb-dib0700 module, AFAIK.
Signed-off-by: Jan Moskyto Matejka <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
scripts/mod/file2alias.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 5759751..73ca97a 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -186,8 +186,8 @@ static void do_usb_entry(struct usb_device_id *id,
range_lo < 0x9 ? "[%X-9" : "[%X",
range_lo);
sprintf(alias + strlen(alias),
- range_hi > 0xA ? "a-%X]" : "%X]",
- range_lo);
+ range_hi > 0xA ? "A-%X]" : "%X]",
+ range_hi);
}
}
if (bcdDevice_initial_digits < (sizeof(id->bcdDevice_lo) * 2 - 1))
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit d651aa1d68a2f0a7ee65697b04c6a92f8c0a12f2 upstream.
Each sub-buffer (buffer page) has a full 64 bit timestamp. The events on
that page use a 27 bit delta against that timestamp in order to save on
bits written to the ring buffer. If the time between events is larger than
what the 27 bits can hold, a "time extend" event is added to hold the
entire 64 bit timestamp again and the events after that hold a delta from
that timestamp.
As a "time extend" is always paired with an event, it is logical to just
allocate the event with the time extend, to make things a bit more efficient.
Unfortunately, when the pairing code was written, it removed the "delta = 0"
from the first commit on a page, causing the events on the page to be
slightly skewed.
Fixes: 69d1b839f7ee "ring-buffer: Bind time extend and data events together"
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/trace/ring_buffer.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 35bf8f7..177fa4a 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2236,6 +2236,13 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
write &= RB_WRITE_MASK;
tail = write - length;
+ /*
+ * If this is the first commit on the page, then it has the same
+ * timestamp as the page itself.
+ */
+ if (!tail)
+ delta = 0;
+
/* See if we shot pass the end of this buffer page */
if (unlikely(write > BUF_PAGE_SIZE))
return rb_move_tail(cpu_buffer, length, tail,
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Eric W. Biederman" <[email protected]>
commit 96c7a2ff21501691587e1ae969b83cbec8b78e08 upstream.
Recently due to a spike in connections per second memcached on 3
separate boxes triggered the OOM killer from accept. At the time the
OOM killer was triggered there was 4GB out of 36GB free in zone 1. The
problem was that alloc_fdtable was allocating an order 3 page (32KiB) to
hold a bitmap, and there was sufficient fragmentation that the largest
page available was 8KiB.
I find the logic that PAGE_ALLOC_COSTLY_ORDER can't fail pretty dubious
but I do agree that order 3 allocations are very likely to succeed.
There are always pathologies where order > 0 allocations can fail when
there are copious amounts of free memory available. Using the pigeon
hole principle it is easy to show that it requires 1 page more than 50%
of the pages being free to guarantee an order 1 (8KiB) allocation will
succeed, 1 page more than 75% of the pages being free to guarantee an
order 2 (16KiB) allocation will succeed and 1 page more than 87.5% of
the pages being free to guarantee an order 3 allocate will succeed.
A server churning memory with a lot of small requests and replies like
memcached is a common case that if anything can will skew the odds
against large pages being available.
Therefore let's not give external applications a practical way to kill
linux server applications, and specify __GFP_NORETRY to the kmalloc in
alloc_fdmem. Unless I am misreading the code and by the time the code
reaches should_alloc_retry in __alloc_pages_slowpath (where
__GFP_NORETRY becomes signification). We have already tried everything
reasonable to allocate a page and the only thing left to do is wait. So
not waiting and falling back to vmalloc immediately seems like the
reasonable thing to do even if there wasn't a chance of triggering the
OOM killer.
Signed-off-by: "Eric W. Biederman" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Cong Wang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/file.c b/fs/file.c
index ba3f605..d512ca5 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -47,7 +47,7 @@ static void *alloc_fdmem(size_t size)
* vmalloc() if the allocation size will be considered "large" by the VM.
*/
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
- void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN);
+ void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY);
if (data != NULL)
return data;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Gortmaker <[email protected]>
commit 2c45aada341121438affc4cb8d5b4cfaa2813d3d upstream.
In allmodconfig builds for sparc and any other arch which does
not set CONFIG_SPARSE_IRQ, the following will be seen at modpost:
CC [M] lib/cpu-notifier-error-inject.o
CC [M] lib/pm-notifier-error-inject.o
ERROR: "irq_to_desc" [drivers/gpio/gpio-mcp23s08.ko] undefined!
make[2]: *** [__modpost] Error 1
This happens because commit 3911ff30f5 ("genirq: export
handle_edge_irq() and irq_to_desc()") added one export for it, but
there were actually two instances of it, in an if/else clause for
CONFIG_SPARSE_IRQ. Add the second one.
Signed-off-by: Paul Gortmaker <[email protected]>
Cc: Jiri Kosina <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/irq/irqdesc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 192a302..8ab8e93 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -274,6 +274,7 @@ struct irq_desc *irq_to_desc(unsigned int irq)
{
return (irq < NR_IRQS) ? irq_desc + irq : NULL;
}
+EXPORT_SYMBOL(irq_to_desc);
static void free_desc(unsigned int irq)
{
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: David Vrabel <[email protected]>
commit 3661371701e714f0cea4120f6a365340858fb4e4 upstream.
Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED. If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.
So, treat an unexpected backend CLOSED state the same as CLOSING.
Signed-off-by: David Vrabel <[email protected]>
Acked-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/block/xen-blkfront.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 1188f4e..73fb731 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1341,13 +1341,16 @@ static void blkback_changed(struct xenbus_device *dev,
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateConnected:
blkfront_connect(info);
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's Closing state -- fallthrough */
case XenbusStateClosing:
blkfront_closing(info);
break;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Beomho Seo <[email protected]>
commit bef44abccb2677e8d16e50b75316d4fd1061be81 upstream.
This effects the reported scale of the raw values, and thus userspace
applications that use this value.
One micro tesla equal 0.01 gauss. So I have fixed calculation formula And add RAW_TO_GAUSS macro.
ASA is in the range of 0 to 255. If multiply 0.003, calculation result(in_magn_[*]_scale) is
always 0. So multiply 3000 and return and IIO_VAL_INT_PLUS_MICRO.
As a result, read_raw call back function return accurate scale value.
Signed-off-by: Beomho Seo <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
[ luis: backported to 3.5: ak8975 driver is in staging, adjusted file name ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/iio/magnetometer/ak8975.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index 5834e4a..575256b 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -82,6 +82,7 @@
*/
#define AK8975_MAX_CONVERSION_TIMEOUT 500
#define AK8975_CONVERSION_DONE_POLL_TIME 10
+#define RAW_TO_GAUSS(asa) ((((asa) + 128) * 3000) / 256)
/*
* Per-instance context data for the device.
@@ -223,15 +224,15 @@ static int ak8975_setup(struct i2c_client *client)
*
* Since 1uT = 100 gauss, our final scale factor becomes:
*
- * Hadj = H * ((ASA + 128) / 256) * 3/10 * 100
- * Hadj = H * ((ASA + 128) * 30 / 256
+ * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
+ * Hadj = H * ((ASA + 128) * 0.003) / 256
*
* Since ASA doesn't change, we cache the resultant scale factor into the
* device context in ak8975_setup().
*/
- data->raw_to_gauss[0] = ((data->asa[0] + 128) * 30) >> 8;
- data->raw_to_gauss[1] = ((data->asa[1] + 128) * 30) >> 8;
- data->raw_to_gauss[2] = ((data->asa[2] + 128) * 30) >> 8;
+ data->raw_to_gauss[0] = RAW_TO_GAUSS(data->asa[0]);
+ data->raw_to_gauss[1] = RAW_TO_GAUSS(data->asa[1]);
+ data->raw_to_gauss[2] = RAW_TO_GAUSS(data->asa[2]);
return 0;
}
@@ -434,8 +435,9 @@ static int ak8975_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_RAW:
return ak8975_read_axis(indio_dev, chan->address, val);
case IIO_CHAN_INFO_SCALE:
- *val = data->raw_to_gauss[chan->address];
- return IIO_VAL_INT;
+ *val = 0;
+ *val2 = data->raw_to_gauss[chan->address];
+ return IIO_VAL_INT_PLUS_MICRO;
}
return -EINVAL;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars Poeschel <[email protected]>
commit 3ac06b905655b3ef2fd2196bab36e4587e1e4e4f upstream.
3GPP TS 07.10 states in section 5.4.6.3.7:
"The length byte contains the value 2 or 3 ... depending on the break
signal." The break byte is optional and if it is sent, the length is
3. In fact the driver was not able to work with modems that send this
break byte in their modem status control message. If the modem just
sends the break byte if it is really set, then weird things might
happen.
The code for deconding the modem status to the internal linux
presentation in gsm_process_modem has already a big comment about
this 2 or 3 byte length thing and it is already able to decode the
brk, but the code calling the gsm_process_modem function in
gsm_control_modem does not encode it and hand it over the right way.
This patch fixes this.
Without this fix if the modem sends the brk byte in it's modem status
control message the driver will hang when opening a muxed channel.
Signed-off-by: Lars Poeschel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/tty/n_gsm.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 4a418e4..acc0eab 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1091,6 +1091,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
{
unsigned int addr = 0;
unsigned int modem = 0;
+ unsigned int brk = 0;
struct gsm_dlci *dlci;
int len = clen;
u8 *dp = data;
@@ -1117,6 +1118,16 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
if (len == 0)
return;
}
+ len--;
+ if (len > 0) {
+ while (gsm_read_ea(&brk, *dp++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ modem <<= 7;
+ modem |= (brk & 0x7f);
+ }
tty = tty_port_tty_get(&dlci->port);
gsm_process_modem(tty, dlci, modem, clen);
if (tty) {
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Bolle <[email protected]>
commit 5bbb2ae3d6f896f8d2082d1eceb6131c2420b7cf upstream.
bind_get() checks the device number it is called with. It uses
MAX_RAW_MINORS for the upper bound. But MAX_RAW_MINORS is set at compile
time while the actual number of raw devices can be set at runtime. This
means the test can either be too strict or too lenient. And if the test
ends up being too lenient bind_get() might try to access memory beyond
what was allocated for "raw_devices".
So check against the runtime value (max_raw_minors) in this function.
Signed-off-by: Paul Bolle <[email protected]>
Acked-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/char/raw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index 54a3a6d..5959669 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -190,7 +190,7 @@ static int bind_get(int number, dev_t *dev)
struct raw_device_data *rawdev;
struct block_device *bdev;
- if (number <= 0 || number >= MAX_RAW_MINORS)
+ if (number <= 0 || number >= max_raw_minors)
return -EINVAL;
rawdev = &raw_devices[number];
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: H Hartley Sweeten <[email protected]>
commit 1e85c1ea1ff2a60659e790ef8ec76c7339445841 upstream.
The last value written to a analog output channel is cached in the
private data of this driver for readback.
Currently, the wrong value is cached in the (*insn_write) functions.
The current code stores the data[n] value for readback afer the loop
has written all the values. At this time 'n' points past the end of
the data array.
Fix the functions by using a local variable to hold the data being
written to the analog output channel. This variable is then used
after the loop is complete to store the readback value. The current
value is retrieved before the loop in case no values are actually
written..
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/comedi/drivers/adv_pci1710.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index de8c98c..555790c 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -387,6 +387,7 @@ static int pci171x_insn_write_ao(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ unsigned int val;
int n, chan, range, ofs;
chan = CR_CHAN(insn->chanspec);
@@ -402,11 +403,14 @@ static int pci171x_insn_write_ao(struct comedi_device *dev,
outw(devpriv->da_ranges, dev->iobase + PCI171x_DAREF);
ofs = PCI171x_DA1;
}
+ val = devpriv->ao_data[chan];
- for (n = 0; n < insn->n; n++)
- outw(data[n], dev->iobase + ofs);
+ for (n = 0; n < insn->n; n++) {
+ val = data[n];
+ outw(val, dev->iobase + ofs);
+ }
- devpriv->ao_data[chan] = data[n];
+ devpriv->ao_data[chan] = val;
return n;
@@ -555,6 +559,7 @@ static int pci1720_insn_write_ao(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
+ unsigned int val;
int n, rangereg, chan;
chan = CR_CHAN(insn->chanspec);
@@ -564,13 +569,15 @@ static int pci1720_insn_write_ao(struct comedi_device *dev,
outb(rangereg, dev->iobase + PCI1720_RANGE);
devpriv->da_ranges = rangereg;
}
+ val = devpriv->ao_data[chan];
for (n = 0; n < insn->n; n++) {
- outw(data[n], dev->iobase + PCI1720_DA0 + (chan << 1));
+ val = data[n];
+ outw(val, dev->iobase + PCI1720_DA0 + (chan << 1));
outb(0, dev->iobase + PCI1720_SYNCOUT); /* update outputs */
}
- devpriv->ao_data[chan] = data[n];
+ devpriv->ao_data[chan] = val;
return n;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Martyn Welch <[email protected]>
commit f0342e66b397947ed8c3eef8c37b5ca2d5b1bb50 upstream.
In order to ensure the correct width cycles on the VME bus, the VME bridge
drivers implement an algorithm to utilise the largest possible width reads and
writes whilst maintaining natural alignment constraints. The algorithm
currently looks at the start address rather than the current read/write address
when determining whether a 16-bit width cycle is required to get to 32-bit
alignment. This results in incorrect alignment,
Reported-by: Jim Strouth <[email protected]>
Tested-by: Jim Strouth <[email protected]>
Signed-off-by: Martyn Welch <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ luis: backported to 3.5:
- dropped changes to tsi148_master_read() and tsi148_master_write() ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/vme/bridges/vme_ca91cx42.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index e0df92e..7ee77a2 100644
--- a/drivers/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -882,7 +882,7 @@ static ssize_t ca91cx42_master_read(struct vme_master_resource *image,
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
@@ -936,7 +936,7 @@ static ssize_t ca91cx42_master_write(struct vme_master_resource *image,
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit 823d12c95c666fa7ab7dad208d735f6bc6afabdc upstream.
People sometimes create their own custom-configured kernels and forget
to enable CONFIG_SCSI_MULTI_LUN. This causes problems when they plug
in a USB storage device (such as a card reader) with more than one
LUN.
Fortunately, we can tell fairly easily when a storage device claims to
have more than one LUN. When that happens, this patch asks the SCSI
layer to probe all the LUNs automatically, regardless of the config
setting.
The patch also updates the Kconfig help text for usb-storage,
explaining that CONFIG_SCSI_MULTI_LUN may be necessary.
Signed-off-by: Alan Stern <[email protected]>
Reported-by: Thomas Raschbacher <[email protected]>
CC: Matthew Dharm <[email protected]>
CC: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/storage/Kconfig | 4 +++-
drivers/usb/storage/scsiglue.c | 6 ++++++
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 685edc8..144386b 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -19,7 +19,9 @@ config USB_STORAGE
This option depends on 'SCSI' support being enabled, but you
probably also need 'SCSI device support: SCSI disk support'
- (BLK_DEV_SD) for most USB storage devices.
+ (BLK_DEV_SD) for most USB storage devices. Some devices also
+ will require 'Probe all LUNs on each SCSI device'
+ (SCSI_MULTI_LUN).
To compile this driver as a module, choose M here: the
module will be called usb-storage.
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a6e4c4a..bacb37b 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -78,6 +78,8 @@ static const char* host_info(struct Scsi_Host *host)
static int slave_alloc (struct scsi_device *sdev)
{
+ struct us_data *us = host_to_us(sdev->host);
+
/*
* Set the INQUIRY transfer length to 36. We don't use any of
* the extra data and many devices choke if asked for more or
@@ -102,6 +104,10 @@ static int slave_alloc (struct scsi_device *sdev)
*/
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+ /* Tell the SCSI layer if we know there is more than one LUN */
+ if (us->protocol == USB_PR_BULK && us->max_lun > 0)
+ sdev->sdev_bflags |= BLIST_FORCELUN;
+
return 0;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
commit 338f977f4eb441e69bb9a46eaa0ac715c931a67f upstream.
The "new" fragmentation code (since my rewrite almost 5 years ago)
erroneously sets skb->len rather than using skb_trim() to adjust
the length of the first fragment after copying out all the others.
This leaves the skb tail pointer pointing to after where the data
originally ended, and thus causes the encryption MIC to be written
at that point, rather than where it belongs: immediately after the
data.
The impact of this is that if software encryption is done, then
a) encryption doesn't work for the first fragment, the connection
becomes unusable as the first fragment will never be properly
verified at the receiver, the MIC is practically guaranteed to
be wrong
b) we leak up to 8 bytes of plaintext (!) of the packet out into
the air
This is only mitigated by the fact that many devices are capable
of doing encryption in hardware, in which case this can't happen
as the tail pointer is irrelevant in that case. Additionally,
fragmentation is not used very frequently and would normally have
to be configured manually.
Fix this by using skb_trim() properly.
Fixes: 2de8e0d999b8 ("mac80211: rewrite fragmentation")
Reported-by: Jouni Malinen <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/mac80211/tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 79cfca3..df9e376 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -909,7 +909,7 @@ static int ieee80211_fragment(struct ieee80211_tx_data *tx,
}
/* adjust first fragment's length */
- skb->len = hdrlen + per_fragm;
+ skb_trim(skb, hdrlen + per_fragm);
return 0;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulrich Hahn <[email protected]>
commit 76f24e3f39a1a94bab0d54e98899d64abcd9f69c upstream.
Adding two more IDs to the ftdi_sio usb serial driver.
It now connects Tagsys RFID readers.
There might be more IDs out there for other Tagsys models.
Signed-off-by: Ulrich Hahn <[email protected]>
Cc: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 2 ++
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 33e7aec..ab8b689 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -203,6 +203,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index eb03021..1e2d369 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -364,6 +364,12 @@
/* Sprog II (Andrew Crosland's SprogII DCC interface) */
#define FTDI_SPROG_II 0xF0C8
+/*
+ * Two of the Tagsys RFID Readers
+ */
+#define FTDI_TAGSYS_LP101_PID 0xF0E9 /* Tagsys L-P101 RFID*/
+#define FTDI_TAGSYS_P200X_PID 0xF0EE /* Tagsys Medio P200x RFID*/
+
/* an infrared receiver for user access control with IR tags */
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit c5637e5119c43452a00e27c274356b072263ecbb upstream.
This patch adds an unusual-devs entry for the BlackBerry 9000. This
fixes Bugzilla #22442.
Signed-off-by: Alan Stern <[email protected]>
Reported-by: Moritz Moeller-Herrmann <[email protected]>
Tested-by: Moritz Moeller-Herrmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d904c59..e72f39a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1441,6 +1441,13 @@ UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Moritz Moeller-Herrmann <[email protected]> */
+UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201,
+ "Research In Motion",
+ "BlackBerry Bold 9000",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Reported by Michael Stattmann <[email protected]> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit a9c143c82608bee2a36410caa56d82cd86bdc7fa upstream.
The Cypress ATACB unusual-devs entry for the Super Top SATA bridge
causes problems. Although it was originally reported only for
bcdDevice = 0x160, its range was much larger. This resulted in a bug
report for bcdDevice 0x220, so the range was capped at 0x219. Now
Milan reports errors with bcdDevice 0x150.
Therefore this patch restricts the range to just 0x160.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: Milan Svoboda <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/storage/unusual_cypress.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 65a6a75..82e8ed0 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -31,7 +31,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
"Cypress ISD-300LP",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
-UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x0219,
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160,
"Super Top",
"USB 2.0 SATA BRIDGE",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit d5a1c7e3fc38d9c7d629e1e47f32f863acbdec3d upstream.
41c7f7424259f ("rtc: Disable the alarm in the hardware (v2)") added the
functionality to disable the RTC wake alarm when shutting down the box.
However, there are at least two b0rked BIOSes we know about:
https://bugzilla.novell.com/show_bug.cgi?id=812592
https://bugzilla.novell.com/show_bug.cgi?id=805740
where, when wakeup alarm is enabled in the BIOS, the machine reboots
automatically right after shutdown, regardless of what wakeup time is
programmed.
Bisecting the issue lead to this patch so disable its functionality with
a DMI quirk only for those boxes.
Cc: Brecht Machiels <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Rabin Vincent <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
[jstultz: Changed variable name for clarity, added extra dmi entry]
Tested-by: Brecht Machiels <[email protected]>
Tested-by: Borislav Petkov <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/rtc/rtc-cmos.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 51 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 6a4adf7..d76a77c 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -34,11 +34,11 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
-#include <linux/mod_devicetable.h>
#include <linux/log2.h>
#include <linux/pm.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/dmi.h>
/* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
#include <asm-generic/rtc.h>
@@ -377,6 +377,51 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
return 0;
}
+/*
+ * Do not disable RTC alarm on shutdown - workaround for b0rked BIOSes.
+ */
+static bool alarm_disable_quirk;
+
+static int __init set_alarm_disable_quirk(const struct dmi_system_id *id)
+{
+ alarm_disable_quirk = true;
+ pr_info("rtc-cmos: BIOS has alarm-disable quirk. ");
+ pr_info("RTC alarms disabled\n");
+ return 0;
+}
+
+static const struct dmi_system_id rtc_quirks[] __initconst = {
+ /* https://bugzilla.novell.com/show_bug.cgi?id=805740 */
+ {
+ .callback = set_alarm_disable_quirk,
+ .ident = "IBM Truman",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "4852570"),
+ },
+ },
+ /* https://bugzilla.novell.com/show_bug.cgi?id=812592 */
+ {
+ .callback = set_alarm_disable_quirk,
+ .ident = "Gigabyte GA-990XA-UD3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "GA-990XA-UD3"),
+ },
+ },
+ /* http://permalink.gmane.org/gmane.linux.kernel/1604474 */
+ {
+ .callback = set_alarm_disable_quirk,
+ .ident = "Toshiba Satellite L300",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"),
+ },
+ },
+ {}
+};
+
static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
@@ -385,6 +430,9 @@ static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
if (!is_valid_irq(cmos->irq))
return -EINVAL;
+ if (alarm_disable_quirk)
+ return 0;
+
spin_lock_irqsave(&rtc_lock, flags);
if (enabled)
@@ -1169,6 +1217,8 @@ static int __init cmos_init(void)
platform_driver_registered = true;
}
+ dmi_check_system(rtc_quirks);
+
if (retval == 0)
return 0;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <[email protected]>
commit 67847baee056892dc35efb9c3fd05ae7f075588c upstream.
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 82c392f..33e7aec 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -163,6 +163,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index a7019d1..eb03021 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -50,6 +50,7 @@
#define TI_XDS100V2_PID 0xa6d0
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+#define FTDI_EV3CON_PID 0xABB9 /* Mindstorms EV3 Console Adapter */
/* US Interface Navigator (http://www.usinterface.com/) */
#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <[email protected]>
commit 6fdda9a9c5db367130cf32df5d6618d08b89f46a upstream.
As part of normal operaions, the hrtimer subsystem frequently calls
into the timekeeping code, creating a locking order of
hrtimer locks -> timekeeping locks
clock_was_set_delayed() was suppoed to allow us to avoid deadlocks
between the timekeeping the hrtimer subsystem, so that we could
notify the hrtimer subsytem the time had changed while holding
the timekeeping locks. This was done by scheduling delayed work
that would run later once we were out of the timekeeing code.
But unfortunately the lock chains are complex enoguh that in
scheduling delayed work, we end up eventually trying to grab
an hrtimer lock.
Sasha Levin noticed this in testing when the new seqlock lockdep
enablement triggered the following (somewhat abrieviated) message:
[ 251.100221] ======================================================
[ 251.100221] [ INFO: possible circular locking dependency detected ]
[ 251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted
[ 251.101967] -------------------------------------------------------
[ 251.101967] kworker/10:1/4506 is trying to acquire lock:
[ 251.101967] (timekeeper_seq){----..}, at: [<ffffffff81160e96>] retrigger_next_event+0x56/0x70
[ 251.101967]
[ 251.101967] but task is already holding lock:
[ 251.101967] (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70
[ 251.101967]
[ 251.101967] which lock already depends on the new lock.
[ 251.101967]
[ 251.101967]
[ 251.101967] the existing dependency chain (in reverse order) is:
[ 251.101967]
-> #5 (hrtimer_bases.lock#11){-.-...}:
[snipped]
-> #4 (&rt_b->rt_runtime_lock){-.-...}:
[snipped]
-> #3 (&rq->lock){-.-.-.}:
[snipped]
-> #2 (&p->pi_lock){-.-.-.}:
[snipped]
-> #1 (&(&pool->lock)->rlock){-.-...}:
[ 251.101967] [<ffffffff81194803>] validate_chain+0x6c3/0x7b0
[ 251.101967] [<ffffffff81194d9d>] __lock_acquire+0x4ad/0x580
[ 251.101967] [<ffffffff81194ff2>] lock_acquire+0x182/0x1d0
[ 251.101967] [<ffffffff84398500>] _raw_spin_lock+0x40/0x80
[ 251.101967] [<ffffffff81153e69>] __queue_work+0x1a9/0x3f0
[ 251.101967] [<ffffffff81154168>] queue_work_on+0x98/0x120
[ 251.101967] [<ffffffff81161351>] clock_was_set_delayed+0x21/0x30
[ 251.101967] [<ffffffff811c4bd1>] do_adjtimex+0x111/0x160
[ 251.101967] [<ffffffff811e2711>] compat_sys_adjtimex+0x41/0x70
[ 251.101967] [<ffffffff843a4b49>] ia32_sysret+0x0/0x5
[ 251.101967]
-> #0 (timekeeper_seq){----..}:
[snipped]
[ 251.101967] other info that might help us debug this:
[ 251.101967]
[ 251.101967] Chain exists of:
timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11
[ 251.101967] Possible unsafe locking scenario:
[ 251.101967]
[ 251.101967] CPU0 CPU1
[ 251.101967] ---- ----
[ 251.101967] lock(hrtimer_bases.lock#11);
[ 251.101967] lock(&rt_b->rt_runtime_lock);
[ 251.101967] lock(hrtimer_bases.lock#11);
[ 251.101967] lock(timekeeper_seq);
[ 251.101967]
[ 251.101967] *** DEADLOCK ***
[ 251.101967]
[ 251.101967] 3 locks held by kworker/10:1/4506:
[ 251.101967] #0: (events){.+.+.+}, at: [<ffffffff81154960>] process_one_work+0x200/0x530
[ 251.101967] #1: (hrtimer_work){+.+...}, at: [<ffffffff81154960>] process_one_work+0x200/0x530
[ 251.101967] #2: (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70
[ 251.101967]
[ 251.101967] stack backtrace:
[ 251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053
[ 251.101967] Workqueue: events clock_was_set_work
So the best solution is to avoid calling clock_was_set_delayed() while
holding the timekeeping lock, and instead using a flag variable to
decide if we should call clock_was_set() once we've released the locks.
This works for the case here, where the do_adjtimex() was the deadlock
trigger point. Unfortuantely, in update_wall_time() we still hold
the jiffies lock, which would deadlock with the ipi triggered by
clock_was_set(), preventing us from calling it even after we drop the
timekeeping lock. So instead call clock_was_set_delayed() at that point.
Cc: Thomas Gleixner <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Sasha Levin <[email protected]>
Reported-by: Sasha Levin <[email protected]>
Tested-by: Sasha Levin <[email protected]>
Signed-off-by: John Stultz <[email protected]>
[ luis: backported to 3.5: used John Stultz's backport to 3.4 kernel ]
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/time/timekeeping.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 8954990..a9ae4bd 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -986,7 +986,8 @@ static void timekeeping_adjust(s64 offset)
*
* Returns the unconsumed cycles.
*/
-static cycle_t logarithmic_accumulation(cycle_t offset, int shift)
+static cycle_t logarithmic_accumulation(cycle_t offset, int shift,
+ unsigned int *clock_set)
{
u64 nsecps = (u64)NSEC_PER_SEC << timekeeper.shift;
u64 raw_nsecs;
@@ -1008,7 +1009,7 @@ static cycle_t logarithmic_accumulation(cycle_t offset, int shift)
timekeeper.xtime.tv_sec += leap;
timekeeper.wall_to_monotonic.tv_sec -= leap;
if (leap)
- clock_was_set_delayed();
+ *clock_set = 1;
}
/* Accumulate raw time */
@@ -1040,6 +1041,7 @@ static void update_wall_time(void)
struct clocksource *clock;
cycle_t offset;
int shift = 0, maxshift;
+ unsigned int clock_set = 0;
unsigned long flags;
write_seqlock_irqsave(&timekeeper.lock, flags);
@@ -1076,7 +1078,7 @@ static void update_wall_time(void)
maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
shift = min(shift, maxshift);
while (offset >= timekeeper.cycle_interval) {
- offset = logarithmic_accumulation(offset, shift);
+ offset = logarithmic_accumulation(offset, shift, &clock_set);
if(offset < timekeeper.cycle_interval<<shift)
shift--;
}
@@ -1130,7 +1132,7 @@ static void update_wall_time(void)
timekeeper.xtime.tv_sec += leap;
timekeeper.wall_to_monotonic.tv_sec -= leap;
if (leap)
- clock_was_set_delayed();
+ clock_set = 1;
}
timekeeping_update(false);
@@ -1138,6 +1140,8 @@ static void update_wall_time(void)
out:
write_sequnlock_irqrestore(&timekeeper.lock, flags);
+ if (clock_set)
+ clock_was_set_delayed();
}
/**
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Sujith Manoharan <[email protected]>
commit 8298383c2cd5a6d0639f1bb1781fba181bd20154 upstream.
Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter.
Signed-off-by: Sujith Manoharan <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/ath/ath9k/init.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 9aa005e..a933eb2 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -46,6 +46,10 @@ static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
+static int ath9k_ps_enable;
+module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
+MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
+
bool is_ath9k_unloaded;
/* We use the hw_value as an index into our private channel structure */
@@ -673,11 +677,13 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+ if (ath9k_ps_enable)
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS;
+
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Axel Lin <[email protected]>
commit f7db1588d6028c97c098bb6445eaabc56a25fed8 upstream.
Otherwise, spi_setup() fails with unsupported mode bits message.
Signed-off-by: Axel Lin <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/spi/spi-nuc900.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index dae8be2..f244d19 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -374,6 +374,8 @@ static int __devinit nuc900_spi_probe(struct platform_device *pdev)
init_completion(&hw->done);
master->mode_bits = SPI_MODE_0;
+ if (hw->pdata->lsb)
+ master->mode_bits |= SPI_LSB_FIRST;
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = hw->pdata->bus_num;
hw->bitbang.master = hw->master;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ying Xue <[email protected]>
commit 57d2aa00dcec67afa52478730f2b524521af14fb upstream.
The issue below was found in 2.6.34-rt rather than mainline rt
kernel, but the issue still exists upstream as well.
So please let me describe how it was noticed on 2.6.34-rt:
On this version, each softirq has its own thread, it means there
is at least one RT FIFO task per cpu. The priority of these
tasks is set to 49 by default. If user launches an RT FIFO task
with priority lower than 49 of softirq RT tasks, it's possible
there are two RT FIFO tasks enqueued one cpu runqueue at one
moment. By current strategy of balancing RT tasks, when it comes
to RT tasks, we really need to put them off to a CPU that they
can run on as soon as possible. Even if it means a bit of cache
line flushing, we want RT tasks to be run with the least latency.
When the user RT FIFO task which just launched before is
running, the sched timer tick of the current cpu happens. In this
tick period, the timeout value of the user RT task will be
updated once. Subsequently, we try to wake up one softirq RT
task on its local cpu. As the priority of current user RT task
is lower than the softirq RT task, the current task will be
preempted by the higher priority softirq RT task. Before
preemption, we check to see if current can readily move to a
different cpu. If so, we will reschedule to allow the RT push logic
to try to move current somewhere else. Whenever the woken
softirq RT task runs, it first tries to migrate the user FIFO RT
task over to a cpu that is running a task of lesser priority. If
migration is done, it will send a reschedule request to the found
cpu by IPI interrupt. Once the target cpu responds the IPI
interrupt, it will pick the migrated user RT task to preempt its
current task. When the user RT task is running on the new cpu,
the sched timer tick of the cpu fires. So it will tick the user
RT task again. This also means the RT task timeout value will be
updated again. As the migration may be done in one tick period,
it means the user RT task timeout value will be updated twice
within one tick.
If we set a limit on the amount of cpu time for the user RT task
by setrlimit(RLIMIT_RTTIME), the SIGXCPU signal should be posted
upon reaching the soft limit.
But exactly when the SIGXCPU signal should be sent depends on the
RT task timeout value. In fact the timeout mechanism of sending
the SIGXCPU signal assumes the RT task timeout is increased once
every tick.
However, currently the timeout value may be added twice per
tick. So it results in the SIGXCPU signal being sent earlier
than expected.
To solve this issue, we prevent the timeout value from increasing
twice within one tick time by remembering the jiffies value of
last updating the timeout. As long as the RT task's jiffies is
different with the global jiffies value, we allow its timeout to
be updated.
Signed-off-by: Ying Xue <[email protected]>
Signed-off-by: Fan Du <[email protected]>
Reviewed-by: Yong Zhang <[email protected]>
Acked-by: Steven Rostedt <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Li Zefan <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/sched.h | 1 +
kernel/sched/rt.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index be28098..c980fa7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1203,6 +1203,7 @@ struct sched_entity {
struct sched_rt_entity {
struct list_head run_list;
unsigned long timeout;
+ unsigned long watchdog_stamp;
unsigned int time_slice;
struct sched_rt_entity *back;
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index ad4787b..6b46fb1 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2004,7 +2004,11 @@ static void watchdog(struct rq *rq, struct task_struct *p)
if (soft != RLIM_INFINITY) {
unsigned long next;
- p->rt.timeout++;
+ if (p->rt.watchdog_stamp != jiffies) {
+ p->rt.timeout++;
+ p->rt.watchdog_stamp = jiffies;
+ }
+
next = DIV_ROUND_UP(min(soft, hard), USEC_PER_SEC/HZ);
if (p->rt.timeout > next)
p->cputime_expires.sched_exp = p->se.sum_exec_runtime;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleksij Rempel <[email protected]>
commit 6bca610d97b6139a1d7598b8009da9d339daa50f upstream.
It is a copy/paste of patch provided by Sujith for ath9k.
"Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter."
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 29641e7..b53c7f0 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -30,6 +30,10 @@ int htc_modparam_nohwcrypt;
module_param_named(nohwcrypt, htc_modparam_nohwcrypt, int, 0444);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
+static int ath9k_ps_enable;
+module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
+MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
+
#define CHAN2G(_freq, _idx) { \
.center_freq = (_freq), \
.hw_value = (_idx), \
@@ -699,11 +703,13 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+ if (ath9k_ps_enable)
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS;
+
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: George Spelvin <[email protected]>
commit fcce9a35f8faaa1f52236c554ef1b15d99a7537e upstream.
A third possible PCI ID, as personally observed, and found in the
pci.ids list.
Signed-off-by: George Spelvin <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/ata/ahci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 0afabef..5630e99 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -435,6 +435,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
.driver_data = board_ahci_yes_fbs }, /* 88se9125 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9172 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit aac5c4226e7136c331ed384c25d5560204da10a0 upstream.
If kvm_io_bus_register_dev() fails then it returns success but it should
return an error code.
I also did a little cleanup like removing an impossible NULL test.
Fixes: 2b3c246a682c ('KVM: Make coalesced mmio use a device per zone')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
virt/kvm/coalesced_mmio.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/virt/kvm/coalesced_mmio.c b/virt/kvm/coalesced_mmio.c
index 88b2fe3..00d8642 100644
--- a/virt/kvm/coalesced_mmio.c
+++ b/virt/kvm/coalesced_mmio.c
@@ -154,17 +154,13 @@ int kvm_vm_ioctl_register_coalesced_mmio(struct kvm *kvm,
list_add_tail(&dev->list, &kvm->coalesced_zones);
mutex_unlock(&kvm->slots_lock);
- return ret;
+ return 0;
out_free_dev:
mutex_unlock(&kvm->slots_lock);
-
kfree(dev);
- if (dev == NULL)
- return -ENXIO;
-
- return 0;
+ return ret;
}
int kvm_vm_ioctl_unregister_coalesced_mmio(struct kvm *kvm,
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit ac323d8d807060f7c95a685a9fe861e7b6300993 upstream.
Fix NULL pointer dereference of "chip->pdata" if platform_data was not
supplied to the driver.
The driver during probe stored the pointer to the platform_data:
chip->pdata = client->dev.platform_data;
Later it was dereferenced in max17040_get_online() and
max17040_get_status().
If platform_data was not supplied, the NULL pointer exception would
happen:
[ 6.626094] Unable to handle kernel of a at virtual address 00000000
[ 6.628557] pgd = c0004000
[ 6.632868] [00000000] *pgd=66262564
[ 6.634636] Unable to handle kernel paging request at virtual address e6262000
[ 6.642014] pgd = de468000
[ 6.644700] [e6262000] *pgd=00000000
[ 6.648265] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 6.653552] Modules linked in:
[ 6.656598] CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 3.10.14-02717-gc58b4b4 #505
[ 6.664334] Workqueue: events max17040_work
[ 6.668488] task: dfa11b80 ti: df9f6000 task.ti: df9f6000
[ 6.673873] PC is at show_pte+0x80/0xb8
[ 6.677687] LR is at show_pte+0x3c/0xb8
[ 6.681503] pc : [<c001b7b8>] lr : [<c001b774>] psr: 600f0113
[ 6.681503] sp : df9f7d58 ip : 600f0113 fp : 00000009
[ 6.692965] r10: 00000000 r9 : 00000000 r8 : dfa11b80
[ 6.698171] r7 : df9f7ea0 r6 : e6262000 r5 : 00000000 r4 : 00000000
[ 6.704680] r3 : 00000000 r2 : e6262000 r1 : 600f0193 r0 : c05b3750
[ 6.711194] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 6.718485] Control: 10c53c7d Table: 5e46806a DAC: 00000015
[ 6.724218] Process kworker/0:1 (pid: 31, stack limit = 0xdf9f6238)
[ 6.730465] Stack: (0xdf9f7d58 to 0xdf9f8000)
[ 6.914325] [<c001b7b8>] (show_pte+0x80/0xb8) from [<c047107c>] (__do_kernel_fault.part.9+0x44/0x74)
[ 6.923425] [<c047107c>] (__do_kernel_fault.part.9+0x44/0x74) from [<c001bb7c>] (do_page_fault+0x2c4/0x360)
[ 6.933144] [<c001bb7c>] (do_page_fault+0x2c4/0x360) from [<c0008400>] (do_DataAbort+0x34/0x9c)
[ 6.941825] [<c0008400>] (do_DataAbort+0x34/0x9c) from [<c000e5d8>] (__dabt_svc+0x38/0x60)
[ 6.950058] Exception stack(0xdf9f7ea0 to 0xdf9f7ee8)
[ 6.955099] 7ea0: df0c1790 00000000 00000002 00000000 df0c1794 df0c1790 df0c1790 00000042
[ 6.963271] 7ec0: df0c1794 00000001 00000000 00000009 00000000 df9f7ee8 c0306268 c0306270
[ 6.971419] 7ee0: a00f0113 ffffffff
[ 6.974902] [<c000e5d8>] (__dabt_svc+0x38/0x60) from [<c0306270>] (max17040_work+0x8c/0x144)
[ 6.983317] [<c0306270>] (max17040_work+0x8c/0x144) from [<c003f364>] (process_one_work+0x138/0x440)
[ 6.992429] [<c003f364>] (process_one_work+0x138/0x440) from [<c003fa64>] (worker_thread+0x134/0x3b8)
[ 7.001628] [<c003fa64>] (worker_thread+0x134/0x3b8) from [<c00454bc>] (kthread+0xa4/0xb0)
[ 7.009875] [<c00454bc>] (kthread+0xa4/0xb0) from [<c000eb28>] (ret_from_fork+0x14/0x2c)
[ 7.017943] Code: e1a03005 e2422480 e0826104 e59f002c (e7922104)
[ 7.024017] ---[ end trace 73bc7006b9cc5c79 ]---
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Fixes: c6f4a42de60b981dd210de01cd3e575835e3158e
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/power/max17040_battery.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index c284143..ec8b948 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -148,7 +148,7 @@ static void max17040_get_online(struct i2c_client *client)
{
struct max17040_chip *chip = i2c_get_clientdata(client);
- if (chip->pdata->battery_online)
+ if (chip->pdata && chip->pdata->battery_online)
chip->online = chip->pdata->battery_online();
else
chip->online = 1;
@@ -158,7 +158,8 @@ static void max17040_get_status(struct i2c_client *client)
{
struct max17040_chip *chip = i2c_get_clientdata(client);
- if (!chip->pdata->charger_online || !chip->pdata->charger_enable) {
+ if (!chip->pdata || !chip->pdata->charger_online
+ || !chip->pdata->charger_enable) {
chip->status = POWER_SUPPLY_STATUS_UNKNOWN;
return;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Boonstoppel <[email protected]>
commit a4c96ae319b8047f62dedbe1eac79e321c185749 upstream.
migrate_tasks() uses _pick_next_task_rt() to get tasks from the
real-time runqueues to be migrated. When rt_rq is throttled
_pick_next_task_rt() won't return anything, in which case
migrate_tasks() can't move all threads over and gets stuck in an
infinite loop.
Instead unthrottle rt runqueues before migrating tasks.
Additionally: move unthrottle_offline_cfs_rqs() to rq_offline_fair()
Signed-off-by: Peter Boonstoppel <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Li Zefan <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/sched/core.c | 3 ---
kernel/sched/fair.c | 7 +++++--
kernel/sched/rt.c | 1 +
kernel/sched/sched.h | 1 -
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 281f186..57d8625 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5357,9 +5357,6 @@ static void migrate_tasks(unsigned int dead_cpu)
*/
rq->stop = NULL;
- /* Ensure any throttled groups are reachable by pick_next_task */
- unthrottle_offline_cfs_rqs(rq);
-
for ( ; ; ) {
/*
* There's this thread running, bail when that's the only
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 9e2fe1b..7963693 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2071,7 +2071,7 @@ static void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b)
hrtimer_cancel(&cfs_b->slack_timer);
}
-void unthrottle_offline_cfs_rqs(struct rq *rq)
+static void unthrottle_offline_cfs_rqs(struct rq *rq)
{
struct cfs_rq *cfs_rq;
@@ -2125,7 +2125,7 @@ static inline struct cfs_bandwidth *tg_cfs_bandwidth(struct task_group *tg)
return NULL;
}
static inline void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b) {}
-void unthrottle_offline_cfs_rqs(struct rq *rq) {}
+static inline void unthrottle_offline_cfs_rqs(struct rq *rq) {}
#endif /* CONFIG_CFS_BANDWIDTH */
@@ -4910,6 +4910,9 @@ static void rq_online_fair(struct rq *rq)
static void rq_offline_fair(struct rq *rq)
{
update_sysctl();
+
+ /* Ensure any throttled groups are reachable by pick_next_task */
+ unthrottle_offline_cfs_rqs(rq);
}
#endif /* CONFIG_SMP */
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 06c3c6f..ad4787b 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -691,6 +691,7 @@ balanced:
* runtime - in which case borrowing doesn't make sense.
*/
rt_rq->rt_runtime = RUNTIME_INF;
+ rt_rq->rt_throttled = 0;
raw_spin_unlock(&rt_rq->rt_runtime_lock);
raw_spin_unlock(&rt_b->rt_runtime_lock);
}
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 65bd8a8..400391f 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1140,7 +1140,6 @@ extern void print_rt_stats(struct seq_file *m, int cpu);
extern void init_cfs_rq(struct cfs_rq *cfs_rq);
extern void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq);
-extern void unthrottle_offline_cfs_rqs(struct rq *rq);
extern void cfs_bandwidth_usage_inc(void);
extern void cfs_bandwidth_usage_dec(void);
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Sarah Sharp <[email protected]>
commit 1aa9578c1a9450fb21501c4f549f5b1edb557e6d upstream.
Don Zickus <[email protected]> writes:
Some co-workers of mine bought Samsung laptops that had mostly usb3 ports.
Those ports did not resume correctly (the driver would timeout communicating
and fail). This led to frustration as suspend/resume is a common use for
laptops.
Poking around, I applied the reset on resume quirk to this chipset and the
resume started working. Reloading the xhci_hcd module had been the temporary
workaround.
Signed-off-by: Sarah Sharp <[email protected]>
Reported-by: Don Zickus <[email protected]>
Tested-by: Prarit Bhargava <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/host/xhci-pci.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index a8c59c1..7aca79a 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -138,6 +138,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}
+ if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+ pdev->device == 0x0015 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+ pdev->subsystem_device == 0xc0cd)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Myron Stowe <[email protected]>
commit 69fd3157363935b1e052bd76b8f8ec65e494306e upstream.
With the 0x1b4b vendor ID #define in place, convert hard-coded ID
values.
Signed-off-by: Myron Stowe <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Jeff Garzik <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/ata/ahci.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 77795cf..0afabef 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -427,17 +427,17 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
- { PCI_DEVICE(0x1b4b, 0x9123),
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9123),
.class = PCI_CLASS_STORAGE_SATA_AHCI,
.class_mask = 0xffffff,
.driver_data = board_ahci_yes_fbs }, /* 88se9128 */
- { PCI_DEVICE(0x1b4b, 0x9125),
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9125),
.driver_data = board_ahci_yes_fbs }, /* 88se9125 */
- { PCI_DEVICE(0x1b4b, 0x917a),
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
- { PCI_DEVICE(0x1b4b, 0x9192),
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
- { PCI_DEVICE(0x1b4b, 0x91a3),
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
.driver_data = board_ahci_yes_fbs },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
.driver_data = board_ahci_yes_fbs },
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Hartmut Knaack <[email protected]>
commit 38408d056188be29a6c4e17f3703c796551bb330 upstream.
Only free an IRQ in error_free_irq, if it has been requested previously.
Signed-off-by: Hartmut Knaack <[email protected]>
Acked-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/iio/adc/ad799x_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
index 80e0c6e..b50d1df 100644
--- a/drivers/staging/iio/adc/ad799x_core.c
+++ b/drivers/staging/iio/adc/ad799x_core.c
@@ -911,7 +911,8 @@ static int __devinit ad799x_probe(struct i2c_client *client,
return 0;
error_free_irq:
- free_irq(client->irq, indio_dev);
+ if (client->irq > 0)
+ free_irq(client->irq, indio_dev);
error_cleanup_ring:
ad799x_ring_cleanup(indio_dev);
error_disable_reg:
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Paul E. McKenney" <[email protected]>
commit 85eae82a0855d49852b87deac8653e4ebc8b291f upstream.
The console_cpu_notify() function runs with interrupts disabled in the
CPU_DYING case. It therefore cannot block, for example, as will happen
when it calls console_lock(). Therefore, remove the CPU_DYING leg of
the switch statement to avoid this problem.
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Srivatsa S. Bhat <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Guillaume Morin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/printk.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/kernel/printk.c b/kernel/printk.c
index e959512..0d430b1 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1827,7 +1827,6 @@ static int __cpuinit console_cpu_notify(struct notifier_block *self,
switch (action) {
case CPU_ONLINE:
case CPU_DEAD:
- case CPU_DYING:
case CPU_DOWN_FAILED:
case CPU_UP_CANCELED:
console_lock();
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Galbraith <[email protected]>
commit e221d028bb08b47e624c5f0a31732c642db9d19a upstream.
Root task group bandwidth replenishment must service all CPUs, regardless of
where the timer was last started, and regardless of the isolation mechanism,
lest 'Quoth the Raven, "Nevermore"' become rt scheduling policy.
Signed-off-by: Mike Galbraith <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Li Zefan <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/sched/rt.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 8480912..06c3c6f 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -788,6 +788,19 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)
const struct cpumask *span;
span = sched_rt_period_mask();
+#ifdef CONFIG_RT_GROUP_SCHED
+ /*
+ * FIXME: isolated CPUs should really leave the root task group,
+ * whether they are isolcpus or were isolated via cpusets, lest
+ * the timer run on a CPU which does not service all runqueues,
+ * potentially leaving other CPUs indefinitely throttled. If
+ * isolation is really required, the user will turn the throttle
+ * off to kill the perturbations it causes anyway. Meanwhile,
+ * this maintains functionality for boot and/or troubleshooting.
+ */
+ if (rt_b == &root_task_group.rt_bandwidth)
+ span = cpu_online_mask;
+#endif
for_each_cpu(i, span) {
int enqueue = 0;
struct rt_rq *rt_rq = sched_rt_period_rt_rq(rt_b, i);
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit 23a8e8441a0a74dd612edf81dc89d1600bc0a3d1 upstream.
Doing some different tests, I discovered that function graph tracing, when
filtered via the set_ftrace_filter and set_ftrace_notrace files, does
not always keep with them if another function ftrace_ops is registered
to trace functions.
The reason is that function graph just happens to trace all functions
that the function tracer enables. When there was only one user of
function tracing, the function graph tracer did not need to worry about
being called by functions that it did not want to trace. But now that there
are other users, this becomes a problem.
For example, one just needs to do the following:
# cd /sys/kernel/debug/tracing
# echo schedule > set_ftrace_filter
# echo function_graph > current_tracer
# cat trace
[..]
0) | schedule() {
------------------------------------------
0) <idle>-0 => rcu_pre-7
------------------------------------------
0) ! 2980.314 us | }
0) | schedule() {
------------------------------------------
0) rcu_pre-7 => <idle>-0
------------------------------------------
0) + 20.701 us | }
# echo 1 > /proc/sys/kernel/stack_tracer_enabled
# cat trace
[..]
1) + 20.825 us | }
1) + 21.651 us | }
1) + 30.924 us | } /* SyS_ioctl */
1) | do_page_fault() {
1) | __do_page_fault() {
1) 0.274 us | down_read_trylock();
1) 0.098 us | find_vma();
1) | handle_mm_fault() {
1) | _raw_spin_lock() {
1) 0.102 us | preempt_count_add();
1) 0.097 us | do_raw_spin_lock();
1) 2.173 us | }
1) | do_wp_page() {
1) 0.079 us | vm_normal_page();
1) 0.086 us | reuse_swap_page();
1) 0.076 us | page_move_anon_rmap();
1) | unlock_page() {
1) 0.082 us | page_waitqueue();
1) 0.086 us | __wake_up_bit();
1) 1.801 us | }
1) 0.075 us | ptep_set_access_flags();
1) | _raw_spin_unlock() {
1) 0.098 us | do_raw_spin_unlock();
1) 0.105 us | preempt_count_sub();
1) 1.884 us | }
1) 9.149 us | }
1) + 13.083 us | }
1) 0.146 us | up_read();
When the stack tracer was enabled, it enabled all functions to be traced, which
now the function graph tracer also traces. This is a side effect that should
not occur.
To fix this a test is added when the function tracing is changed, as well as when
the graph tracer is enabled, to see if anything other than the ftrace global_ops
function tracer is enabled. If so, then the graph tracer calls a test trampoline
that will look at the function that is being traced and compare it with the
filters defined by the global_ops.
As an optimization, if there's no other function tracers registered, or if
the only registered function tracers also use the global ops, the function
graph infrastructure will call the registered function graph callback directly
and not go through the test trampoline.
Fixes: d2d45c7a03a2 "tracing: Have stack_tracer use a separate list of functions"
Signed-off-by: Steven Rostedt <[email protected]>
[ luis: backported to 3.5: used Steven's backport to 3.4 ]
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/trace/ftrace.c | 45 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 44 insertions(+), 1 deletion(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 5119235..05dc549 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -239,6 +239,12 @@ static void ftrace_sync_ipi(void *data)
smp_rmb();
}
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static void update_function_graph_func(void);
+#else
+static inline void update_function_graph_func(void) { }
+#endif
+
static void update_ftrace_function(void)
{
ftrace_func_t func;
@@ -257,6 +263,8 @@ static void update_ftrace_function(void)
else
func = ftrace_ops_list_func;
+ update_function_graph_func();
+
#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
ftrace_trace_function = func;
#else
@@ -4482,6 +4490,7 @@ int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
trace_func_graph_ret_t ftrace_graph_return =
(trace_func_graph_ret_t)ftrace_stub;
trace_func_graph_ent_t ftrace_graph_entry = ftrace_graph_entry_stub;
+static trace_func_graph_ent_t __ftrace_graph_entry = ftrace_graph_entry_stub;
/* Try to assign a return stack array on FTRACE_RETSTACK_ALLOC_SIZE tasks. */
static int alloc_retstack_tasklist(struct ftrace_ret_stack **ret_stack_list)
@@ -4622,6 +4631,30 @@ static struct ftrace_ops fgraph_ops __read_mostly = {
.flags = FTRACE_OPS_FL_GLOBAL,
};
+static int ftrace_graph_entry_test(struct ftrace_graph_ent *trace)
+{
+ if (!ftrace_ops_test(&global_ops, trace->func))
+ return 0;
+ return __ftrace_graph_entry(trace);
+}
+
+/*
+ * The function graph tracer should only trace the functions defined
+ * by set_ftrace_filter and set_ftrace_notrace. If another function
+ * tracer ops is registered, the graph tracer requires testing the
+ * function against the global ops, and not just trace any function
+ * that any ftrace_ops registered.
+ */
+static void update_function_graph_func(void)
+{
+ if (ftrace_ops_list == &ftrace_list_end ||
+ (ftrace_ops_list == &global_ops &&
+ global_ops.next == &ftrace_list_end))
+ ftrace_graph_entry = __ftrace_graph_entry;
+ else
+ ftrace_graph_entry = ftrace_graph_entry_test;
+}
+
int register_ftrace_graph(trace_func_graph_ret_t retfunc,
trace_func_graph_ent_t entryfunc)
{
@@ -4646,7 +4679,16 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc,
}
ftrace_graph_return = retfunc;
- ftrace_graph_entry = entryfunc;
+
+ /*
+ * Update the indirect function to the entryfunc, and the
+ * function that gets called to the entry_test first. Then
+ * call the update fgraph entry function to determine if
+ * the entryfunc should be called directly or not.
+ */
+ __ftrace_graph_entry = entryfunc;
+ ftrace_graph_entry = ftrace_graph_entry_test;
+ update_function_graph_func();
ret = ftrace_startup(&fgraph_ops, FTRACE_START_FUNC_RET);
@@ -4665,6 +4707,7 @@ void unregister_ftrace_graph(void)
ftrace_graph_active--;
ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
ftrace_graph_entry = ftrace_graph_entry_stub;
+ __ftrace_graph_entry = ftrace_graph_entry_stub;
ftrace_shutdown(&fgraph_ops, FTRACE_STOP_FUNC_RET);
unregister_pm_notifier(&ftrace_suspend_notifier);
unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit a4c35ed241129dd142be4cadb1e5a474a56d5464 upstream.
The synchronization needed after ftrace_ops are unregistered must happen
after the callback is disabled from becing called by functions.
The current location happens after the function is being removed from the
internal lists, but not after the function callbacks were disabled, leaving
the functions susceptible of being called after their callbacks are freed.
This affects perf and any externel users of function tracing (LTTng and
SystemTap).
Fixes: cdbe61bfe704 "ftrace: Allow dynamically allocated function tracers"
Signed-off-by: Steven Rostedt <[email protected]>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/trace/ftrace.c | 50 ++++++++++++++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 18 deletions(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 6aa8159..5119235 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -376,16 +376,6 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops)
} else if (ops->flags & FTRACE_OPS_FL_CONTROL) {
ret = remove_ftrace_list_ops(&ftrace_control_list,
&control_ops, ops);
- if (!ret) {
- /*
- * The ftrace_ops is now removed from the list,
- * so there'll be no new users. We must ensure
- * all current users are done before we free
- * the control data.
- */
- synchronize_sched();
- control_ops_free(ops);
- }
} else
ret = remove_ftrace_ops(&ftrace_ops_list, ops);
@@ -395,13 +385,6 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops)
if (ftrace_enabled)
update_ftrace_function();
- /*
- * Dynamic ops may be freed, we must make sure that all
- * callers are done before leaving this function.
- */
- if (ops->flags & FTRACE_OPS_FL_DYNAMIC)
- synchronize_sched();
-
return 0;
}
@@ -2015,10 +1998,41 @@ static int ftrace_shutdown(struct ftrace_ops *ops, int command)
command |= FTRACE_UPDATE_TRACE_FUNC;
}
- if (!command || !ftrace_enabled)
+ if (!command || !ftrace_enabled) {
+ /*
+ * If these are control ops, they still need their
+ * per_cpu field freed. Since, function tracing is
+ * not currently active, we can just free them
+ * without synchronizing all CPUs.
+ */
+ if (ops->flags & FTRACE_OPS_FL_CONTROL)
+ control_ops_free(ops);
return 0;
+ }
ftrace_run_update_code(command);
+
+ /*
+ * Dynamic ops may be freed, we must make sure that all
+ * callers are done before leaving this function.
+ * The same goes for freeing the per_cpu data of the control
+ * ops.
+ *
+ * Again, normal synchronize_sched() is not good enough.
+ * We need to do a hard force of sched synchronization.
+ * This is because we use preempt_disable() to do RCU, but
+ * the function tracers can be called where RCU is not watching
+ * (like before user_exit()). We can not rely on the RCU
+ * infrastructure to do the synchronization, thus we must do it
+ * ourselves.
+ */
+ if (ops->flags & (FTRACE_OPS_FL_DYNAMIC | FTRACE_OPS_FL_CONTROL)) {
+ schedule_on_each_cpu(ftrace_sync);
+
+ if (ops->flags & FTRACE_OPS_FL_CONTROL)
+ control_ops_free(ops);
+ }
+
return 0;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: KOSAKI Motohiro <[email protected]>
commit 227d53b397a32a7614667b3ecaf1d89902fb6c12 upstream.
To use spin_{un}lock_irq is dangerous if caller disabled interrupt.
During aio buffer migration, we have a possibility to see the following
call stack.
aio_migratepage [disable interrupt]
migrate_page_copy
clear_page_dirty_for_io
set_page_dirty
__set_page_dirty_buffers
__set_page_dirty
spin_lock_irq
This mean, current aio migration is a deadlockable. spin_lock_irqsave
is a safer alternative and we should use it.
Signed-off-by: KOSAKI Motohiro <[email protected]>
Reported-by: David Rientjes [email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/buffer.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/buffer.c b/fs/buffer.c
index 2c78739..01d673c 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -613,14 +613,16 @@ EXPORT_SYMBOL(mark_buffer_dirty_inode);
static void __set_page_dirty(struct page *page,
struct address_space *mapping, int warn)
{
- spin_lock_irq(&mapping->tree_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mapping->tree_lock, flags);
if (page->mapping) { /* Race with truncate? */
WARN_ON_ONCE(warn && !PageUptodate(page));
account_page_dirtied(page, mapping);
radix_tree_tag_set(&mapping->page_tree,
page_index(page), PAGECACHE_TAG_DIRTY);
}
- spin_unlock_irq(&mapping->tree_lock);
+ spin_unlock_irqrestore(&mapping->tree_lock, flags);
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Cross <[email protected]>
get_monotonic_boottime adds three nanonsecond values stored
in longs, followed by an s64. If the long values are all
close to 1e9 the first three additions can overflow and
become negative when added to the s64. Cast the first
value to s64 so that all additions are 64 bit.
Signed-off-by: Colin Cross <[email protected]>
[jstultz: Fished this out of the AOSP commong.git tree. This was
fixed upstream in v3.6 by ec145babe754f9ea1079034a108104b6001e001c]
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/time/timekeeping.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index a9ae4bd..3988562 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1196,7 +1196,7 @@ void get_monotonic_boottime(struct timespec *ts)
} while (read_seqretry(&timekeeper.lock, seq));
set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec + sleep.tv_sec,
- ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec + nsecs);
+ (s64)ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec + nsecs);
}
EXPORT_SYMBOL_GPL(get_monotonic_boottime);
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: KOSAKI Motohiro <[email protected]>
commit a85d9df1ea1d23682a0ed1e100e6965006595d06 upstream.
During aio stress test, we observed the following lockdep warning. This
mean AIO+numa_balancing is currently deadlockable.
The problem is, aio_migratepage disable interrupt, but
__set_page_dirty_nobuffers unintentionally enable it again.
Generally, all helper function should use spin_lock_irqsave() instead of
spin_lock_irq() because they don't know caller at all.
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&ctx->completion_lock)->rlock);
<Interrupt>
lock(&(&ctx->completion_lock)->rlock);
*** DEADLOCK ***
dump_stack+0x19/0x1b
print_usage_bug+0x1f7/0x208
mark_lock+0x21d/0x2a0
mark_held_locks+0xb9/0x140
trace_hardirqs_on_caller+0x105/0x1d0
trace_hardirqs_on+0xd/0x10
_raw_spin_unlock_irq+0x2c/0x50
__set_page_dirty_nobuffers+0x8c/0xf0
migrate_page_copy+0x434/0x540
aio_migratepage+0xb1/0x140
move_to_new_page+0x7d/0x230
migrate_pages+0x5e5/0x700
migrate_misplaced_page+0xbc/0xf0
do_numa_page+0x102/0x190
handle_pte_fault+0x241/0x970
handle_mm_fault+0x265/0x370
__do_page_fault+0x172/0x5a0
do_page_fault+0x1a/0x70
page_fault+0x28/0x30
Signed-off-by: KOSAKI Motohiro <[email protected]>
Cc: Larry Woodman <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Johannes Weiner <[email protected]>
Acked-by: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
mm/page-writeback.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 31ea8e2..82a1891 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1987,11 +1987,12 @@ int __set_page_dirty_nobuffers(struct page *page)
if (!TestSetPageDirty(page)) {
struct address_space *mapping = page_mapping(page);
struct address_space *mapping2;
+ unsigned long flags;
if (!mapping)
return 1;
- spin_lock_irq(&mapping->tree_lock);
+ spin_lock_irqsave(&mapping->tree_lock, flags);
mapping2 = page_mapping(page);
if (mapping2) { /* Race with truncate? */
BUG_ON(mapping2 != mapping);
@@ -2000,7 +2001,7 @@ int __set_page_dirty_nobuffers(struct page *page)
radix_tree_tag_set(&mapping->page_tree,
page_index(page), PAGECACHE_TAG_DIRTY);
}
- spin_unlock_irq(&mapping->tree_lock);
+ spin_unlock_irqrestore(&mapping->tree_lock, flags);
if (mapping->host) {
/* !PageAnon && !swapper_space */
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 276ab336b4c6e483d12fd46cbf24f97f71867710 upstream.
AD1983 has flexible loopback routes and the generic parser would take
wrong path confusingly instead of taking individual paths via NID 0x0c
and 0x0d. For avoiding it, limit the connections at these widgets so
that the parser can think more straightforwardly. This fixes the
regression of the missing line-in loopback on Dell machine.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011
Signed-off-by: Takashi Iwai <[email protected]>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/hda/patch_analog.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index b1180b5..65e0494 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3575,6 +3575,8 @@ static const char * const ad1884_slave_vols[] = {
static int patch_ad1884(struct hda_codec *codec)
{
struct ad198x_spec *spec;
+ static hda_nid_t conn_0c[] = { 0x08 };
+ static hda_nid_t conn_0d[] = { 0x09 };
int err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -3590,6 +3592,10 @@ static int patch_ad1884(struct hda_codec *codec)
}
set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+ /* limit the loopback routes not to confuse the parser */
+ snd_hda_override_conn_list(codec, 0x0c, ARRAY_SIZE(conn_0c), conn_0c);
+ snd_hda_override_conn_list(codec, 0x0d, ARRAY_SIZE(conn_0d), conn_0d);
+
spec->multiout.max_channels = 2;
spec->multiout.num_dacs = ARRAY_SIZE(ad1884_dac_nids);
spec->multiout.dac_nids = ad1884_dac_nids;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Weijie Yang <[email protected]>
commit f893ab41e4dae2fe8991faf5d86d029068d1ef3a upstream.
swapoff clear swap_info's SWP_USED flag prematurely and free its
resources after that. A concurrent swapon will reuse this swap_info
while its previous resources are not cleared completely.
These late freed resources are:
- p->percpu_cluster
- swap_cgroup_ctrl[type]
- block_device setting
- inode->i_flags &= ~S_SWAPFILE
This patch clears the SWP_USED flag after all its resources are freed,
so that swapon can reuse this swap_info by alloc_swap_info() safely.
[[email protected]: tidy up code comment]
Signed-off-by: Weijie Yang <[email protected]>
Acked-by: Hugh Dickins <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
mm/swapfile.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 71373d0..222928f 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1642,7 +1642,6 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
p->max = 0;
swap_map = p->swap_map;
p->swap_map = NULL;
- p->flags = 0;
frontswap_invalidate_area(type);
spin_unlock(&swap_lock);
mutex_unlock(&swapon_mutex);
@@ -1662,6 +1661,16 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
mutex_unlock(&inode->i_mutex);
}
filp_close(swap_file, NULL);
+
+ /*
+ * Clear the SWP_USED flag after all resources are freed so that swapon
+ * can reuse this swap_info in alloc_swap_info() safely. It is ok to
+ * not hold p->lock after we cleared its SWP_WRITEOK.
+ */
+ spin_lock(&swap_lock);
+ p->flags = 0;
+ spin_unlock(&swap_lock);
+
err = 0;
atomic_inc(&proc_poll_event);
wake_up_interruptible(&proc_poll_wait);
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Vaussard <[email protected]>
commit e7f2a444891cb39f11d5429467d0fd7e011fe7fe upstream.
Commit c420619 "pinctrl: pinconf: remove checks on ops->pin_config_get"
removed the check on (ops != NULL) when performing pinconf_pins_show() or
pinconf_groups_show(). As these entries are always enabled, even if
pinconf is not supported, reading will result in an oops due to NULL
ops.
Instead of checking for ops, remove the corresponding debugfs entries if
pinconf and/or pinmux are not implemented.
Tested on OMAP3 (pinctrl-single).
Signed-off-by: Florian Vaussard <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/pinctrl/core.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 5e59c45..c172754 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1327,8 +1327,10 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
device_root, pctldev, &pinctrl_groups_ops);
debugfs_create_file("gpio-ranges", S_IFREG | S_IRUGO,
device_root, pctldev, &pinctrl_gpioranges_ops);
- pinmux_init_device_debugfs(device_root, pctldev);
- pinconf_init_device_debugfs(device_root, pctldev);
+ if (pctldev->desc->pmxops)
+ pinmux_init_device_debugfs(device_root, pctldev);
+ if (pctldev->desc->confops)
+ pinconf_init_device_debugfs(device_root, pctldev);
}
static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Jones <[email protected]>
commit 866e8d8a9dc1ebb4f9e67197e264ac2df81f7d4b upstream.
mxl111sf_read_reg takes an address of a variable to write to as an argument.
drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c:mxl111sf_config_pin_mux_modes
passes several uninitialized stack variables to this routine, expecting
them to be filled in. In the event that something unexpected happens when
reading from the chip, we end up doing a pr_debug of the value passed in,
revealing whatever garbage happened to be on the stack.
Change the pr_debug to match what happens in the 'success' case, where we
assign buf[1] to *data.
Spotted with Coverity (Bugs 731910 through 731917)
Signed-off-by: Dave Jones <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
[ luis: backported to 3.5:
- file rename: drivers/media/usb/dvb-usb-v2/mxl111sf.c ->
drivers/media/dvb/dvb-usb/mxl111sf.c
- replaced pr_debug() by deb_reg() ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/dvb/dvb-usb/mxl111sf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c
index cd84279..086fb8a 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf.c
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.c
@@ -101,7 +101,7 @@ int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data)
ret = -EINVAL;
}
- deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data);
+ deb_reg("R: (0x%02x, 0x%02x)\n", addr, buf[1]);
fail:
return ret;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Smalley <[email protected]>
commit 2172fa709ab32ca60e86179dc67d0857be8e2c98 upstream.
Setting an empty security context (length=0) on a file will
lead to incorrectly dereferencing the type and other fields
of the security context structure, yielding a kernel BUG.
As a zero-length security context is never valid, just reject
all such security contexts whether coming from userspace
via setxattr or coming from the filesystem upon a getxattr
request by SELinux.
Setting a security context value (empty or otherwise) unknown to
SELinux in the first place is only possible for a root process
(CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only
if the corresponding SELinux mac_admin permission is also granted
to the domain by policy. In Fedora policies, this is only allowed for
specific domains such as livecd for setting down security contexts
that are not defined in the build host policy.
Reproducer:
su
setenforce 0
touch foo
setfattr -n security.selinux foo
Caveat:
Relabeling or removing foo after doing the above may not be possible
without booting with SELinux disabled. Any subsequent access to foo
after doing the above will also trigger the BUG.
BUG output from Matthew Thode:
[ 473.893141] ------------[ cut here ]------------
[ 473.962110] kernel BUG at security/selinux/ss/services.c:654!
[ 473.995314] invalid opcode: 0000 [#6] SMP
[ 474.027196] Modules linked in:
[ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I
3.13.0-grsec #1
[ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0
07/29/10
[ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti:
ffff8805f50cd488
[ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246
[ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX:
0000000000000100
[ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI:
ffff8805e8aaa000
[ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09:
0000000000000006
[ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12:
0000000000000006
[ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15:
0000000000000000
[ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000)
knlGS:0000000000000000
[ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4:
00000000000207f0
[ 474.556058] Stack:
[ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98
ffff8805f1190a40
[ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990
ffff8805e8aac860
[ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060
ffff8805c0ac3d94
[ 474.690461] Call Trace:
[ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a
[ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b
[ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179
[ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4
[ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31
[ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e
[ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22
[ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d
[ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91
[ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b
[ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30
[ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3
[ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b
[ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48
8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7
75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8
[ 475.255884] RIP [<ffffffff814681c7>]
context_struct_compute_av+0xce/0x308
[ 475.296120] RSP <ffff8805c0ac3c38>
[ 475.328734] ---[ end trace f076482e9d754adc ]---
Reported-by: Matthew Thode <[email protected]>
Signed-off-by: Stephen Smalley <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
security/selinux/ss/services.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 4321b8f..c0c3e4e 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -1231,6 +1231,10 @@ static int security_context_to_sid_core(const char *scontext, u32 scontext_len,
struct context context;
int rc = 0;
+ /* An empty security context is never valid. */
+ if (!scontext_len)
+ return -EINVAL;
+
if (!ss_initialized) {
int i;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Jones <[email protected]>
commit 13e1b87c986100169b0695aeb26970943665eda9 upstream.
Fix the following build error:
drivers/media/usb/dvb-usb-v2/
mxl111sf-tuner.h:72:9: error: expected ‘;’, ‘,’ or ‘)’ before ‘struct’
struct mxl111sf_tuner_config *cfg)
Signed-off-by: Dave Jones <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
[ luis: backported to 3.5:
- file rename: drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h ->
drivers/media/dvb/dvb-usb/mxl111sf-tuner.h ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/dvb/dvb-usb/mxl111sf-tuner.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
index ff33396..10b93c4 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.h
@@ -69,7 +69,7 @@ struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
#else
static inline
struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
- struct mxl111sf_state *mxl_state
+ struct mxl111sf_state *mxl_state,
struct mxl111sf_tuner_config *cfg)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Airlie <[email protected]>
commit ec22b4aa993abbd18f5bbbcb20a1c56be3b1d38b upstream.
mode->mdev otherwise the bw limits never kick in.
Reported in RHEL testing.
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/mgag200/mgag200_mode.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index f780f2c..74886ee 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1487,11 +1487,11 @@ static int mga_vga_mode_valid(struct drm_connector *connector,
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (32700 * 1024))) {
return MODE_BANDWIDTH;
- } else if (mode->type == G200_EH &&
+ } else if (mdev->type == G200_EH &&
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (37500 * 1024))) {
return MODE_BANDWIDTH;
- } else if (mode->type == G200_ER &&
+ } else if (mdev->type == G200_ER &&
(mga_vga_calculate_mode_bandwidth(mode,
bpp) > (55000 * 1024))) {
return MODE_BANDWIDTH;
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Harald Freudenberger <[email protected]>
commit ee97dc7db4cbda33e4241c2d85b42d1835bc8a35 upstream.
In s390 des and 3des ctr mode there is one preallocated page
used to speed up the en/decryption. This page is not protected
against concurrent usage and thus there is a potential of data
corruption with multiple threads.
The fix introduces locking/unlocking the ctr page and a slower
fallback solution at concurrency situations.
Signed-off-by: Harald Freudenberger <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/s390/crypto/des_s390.c | 69 +++++++++++++++++++++++++++++++--------------
1 file changed, 48 insertions(+), 21 deletions(-)
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index 5fe77d5..991fb7d 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -25,6 +25,7 @@
#define DES3_KEY_SIZE (3 * DES_KEY_SIZE)
static u8 *ctrblk;
+static DEFINE_SPINLOCK(ctrblk_lock);
struct s390_des_ctx {
u8 iv[DES_BLOCK_SIZE];
@@ -376,54 +377,80 @@ static struct crypto_alg cbc_des3_alg = {
}
};
+static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes)
+{
+ unsigned int i, n;
+
+ /* align to block size, max. PAGE_SIZE */
+ n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(DES_BLOCK_SIZE - 1);
+ for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) {
+ memcpy(ctrptr + i, ctrptr + i - DES_BLOCK_SIZE, DES_BLOCK_SIZE);
+ crypto_inc(ctrptr + i, DES_BLOCK_SIZE);
+ }
+ return n;
+}
+
static int ctr_desall_crypt(struct blkcipher_desc *desc, long func,
- struct s390_des_ctx *ctx, struct blkcipher_walk *walk)
+ struct s390_des_ctx *ctx,
+ struct blkcipher_walk *walk)
{
int ret = blkcipher_walk_virt_block(desc, walk, DES_BLOCK_SIZE);
- unsigned int i, n, nbytes;
- u8 buf[DES_BLOCK_SIZE];
- u8 *out, *in;
+ unsigned int n, nbytes;
+ u8 buf[DES_BLOCK_SIZE], ctrbuf[DES_BLOCK_SIZE];
+ u8 *out, *in, *ctrptr = ctrbuf;
+
+ if (!walk->nbytes)
+ return ret;
- memcpy(ctrblk, walk->iv, DES_BLOCK_SIZE);
+ if (spin_trylock(&ctrblk_lock))
+ ctrptr = ctrblk;
+
+ memcpy(ctrptr, walk->iv, DES_BLOCK_SIZE);
while ((nbytes = walk->nbytes) >= DES_BLOCK_SIZE) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
while (nbytes >= DES_BLOCK_SIZE) {
- /* align to block size, max. PAGE_SIZE */
- n = (nbytes > PAGE_SIZE) ? PAGE_SIZE :
- nbytes & ~(DES_BLOCK_SIZE - 1);
- for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) {
- memcpy(ctrblk + i, ctrblk + i - DES_BLOCK_SIZE,
- DES_BLOCK_SIZE);
- crypto_inc(ctrblk + i, DES_BLOCK_SIZE);
- }
- ret = crypt_s390_kmctr(func, ctx->key, out, in, n, ctrblk);
- if (ret < 0 || ret != n)
+ if (ctrptr == ctrblk)
+ n = __ctrblk_init(ctrptr, nbytes);
+ else
+ n = DES_BLOCK_SIZE;
+ ret = crypt_s390_kmctr(func, ctx->key, out, in,
+ n, ctrptr);
+ if (ret < 0 || ret != n) {
+ if (ctrptr == ctrblk)
+ spin_unlock(&ctrblk_lock);
return -EIO;
+ }
if (n > DES_BLOCK_SIZE)
- memcpy(ctrblk, ctrblk + n - DES_BLOCK_SIZE,
+ memcpy(ctrptr, ctrptr + n - DES_BLOCK_SIZE,
DES_BLOCK_SIZE);
- crypto_inc(ctrblk, DES_BLOCK_SIZE);
+ crypto_inc(ctrptr, DES_BLOCK_SIZE);
out += n;
in += n;
nbytes -= n;
}
ret = blkcipher_walk_done(desc, walk, nbytes);
}
-
+ if (ctrptr == ctrblk) {
+ if (nbytes)
+ memcpy(ctrbuf, ctrptr, DES_BLOCK_SIZE);
+ else
+ memcpy(walk->iv, ctrptr, DES_BLOCK_SIZE);
+ spin_unlock(&ctrblk_lock);
+ }
/* final block may be < DES_BLOCK_SIZE, copy only nbytes */
if (nbytes) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
ret = crypt_s390_kmctr(func, ctx->key, buf, in,
- DES_BLOCK_SIZE, ctrblk);
+ DES_BLOCK_SIZE, ctrbuf);
if (ret < 0 || ret != DES_BLOCK_SIZE)
return -EIO;
memcpy(out, buf, nbytes);
- crypto_inc(ctrblk, DES_BLOCK_SIZE);
+ crypto_inc(ctrbuf, DES_BLOCK_SIZE);
ret = blkcipher_walk_done(desc, walk, 0);
+ memcpy(walk->iv, ctrbuf, DES_BLOCK_SIZE);
}
- memcpy(walk->iv, ctrblk, DES_BLOCK_SIZE);
return ret;
}
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 4fa71c1550a857ff1dbfe9e99acc1f4cfec5f0d0 upstream.
The commit 44dcbbb1cd61 introduced the usage of bitreverse helpers but
forgot to add the dependency. This patch adds the selection for
CONFIG_BITREVERSE.
Fixes: 44dcbbb1cd61 ('ALSA: snd-usb: add support for bit-reversed byte formats')
Reported-by: Fengguang Wu <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/usb/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index ff77b28..b861391d 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -14,6 +14,7 @@ config SND_USB_AUDIO
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
+ select BITREVERSE
help
Say Y here to include support for USB audio and USB MIDI
devices.
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Yijing Wang <[email protected]>
commit b0cc6020e1cc62f1253215f189611b34be4a83c7 upstream.
Currently, we enable ARI in a device's upstream bridge if the bridge and
the device support it. But we never disable ARI, even if the device is
removed and replaced with a device that doesn't support ARI.
This means that if we hot-remove an ARI device and replace it with a
non-ARI multi-function device, we find only function 0 of the new device
because the upstream bridge still has ARI enabled, and next_ari_fn()
only returns function 0 for the new non-ARI device.
This patch disables ARI in the upstream bridge if the device doesn't
support ARI. See the PCIe spec, r3.0, sec 6.13.
[bhelgaas: changelog, function comment]
Signed-off-by: Yijing Wang <[email protected]>
Signed-off-by: Jiang Liu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
[ luis: backported to 3.5: used Yijing Wang's backport to 3.4 ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/pci/pci.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index fa7c0f0..caeddd4 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1974,6 +1974,9 @@ void pci_free_cap_save_buffers(struct pci_dev *dev)
/**
* pci_enable_ari - enable ARI forwarding if hardware support it
* @dev: the PCI device
+ *
+ * If @dev and its upstream bridge both support ARI, enable ARI in the
+ * bridge. Otherwise, disable ARI in the bridge.
*/
void pci_enable_ari(struct pci_dev *dev)
{
@@ -1985,10 +1988,6 @@ void pci_enable_ari(struct pci_dev *dev)
if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn)
return;
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
- if (!pos)
- return;
-
bridge = dev->bus->self;
if (!bridge || !pci_is_pcie(bridge))
return;
@@ -2007,10 +2006,14 @@ void pci_enable_ari(struct pci_dev *dev)
return;
pci_read_config_word(bridge, pos + PCI_EXP_DEVCTL2, &ctrl);
- ctrl |= PCI_EXP_DEVCTL2_ARI;
+ if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI)) {
+ ctrl |= PCI_EXP_DEVCTL2_ARI;
+ bridge->ari_enabled = 1;
+ } else {
+ ctrl &= ~PCI_EXP_DEVCTL2_ARI;
+ bridge->ari_enabled = 0;
+ }
pci_write_config_word(bridge, pos + PCI_EXP_DEVCTL2, ctrl);
-
- bridge->ari_enabled = 1;
}
/**
--
1.9.0
3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Harald Freudenberger <[email protected]>
commit adc3fcf1552b6e406d172fd9690bbd1395053d13 upstream.
In s390 des and des3_ede cbc mode the iv value is not protected
against concurrency access and modifications from another running
en/decrypt operation which is using the very same tfm struct
instance. This fix copies the iv to the local stack before
the crypto operation and stores the value back when done.
Signed-off-by: Harald Freudenberger <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/s390/crypto/des_s390.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index 00d649c..5fe77d5 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -106,29 +106,35 @@ static int ecb_desall_crypt(struct blkcipher_desc *desc, long func,
}
static int cbc_desall_crypt(struct blkcipher_desc *desc, long func,
- u8 *iv, struct blkcipher_walk *walk)
+ struct blkcipher_walk *walk)
{
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
int ret = blkcipher_walk_virt(desc, walk);
unsigned int nbytes = walk->nbytes;
+ struct {
+ u8 iv[DES_BLOCK_SIZE];
+ u8 key[DES3_KEY_SIZE];
+ } param;
if (!nbytes)
goto out;
- memcpy(iv, walk->iv, DES_BLOCK_SIZE);
+ memcpy(param.iv, walk->iv, DES_BLOCK_SIZE);
+ memcpy(param.key, ctx->key, DES3_KEY_SIZE);
do {
/* only use complete blocks */
unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
u8 *out = walk->dst.virt.addr;
u8 *in = walk->src.virt.addr;
- ret = crypt_s390_kmc(func, iv, out, in, n);
+ ret = crypt_s390_kmc(func, ¶m, out, in, n);
if (ret < 0 || ret != n)
return -EIO;
nbytes &= DES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, walk, nbytes);
} while ((nbytes = walk->nbytes));
- memcpy(walk->iv, iv, DES_BLOCK_SIZE);
+ memcpy(walk->iv, param.iv, DES_BLOCK_SIZE);
out:
return ret;
@@ -181,22 +187,20 @@ static int cbc_des_encrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, &walk);
}
static int cbc_des_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, &walk);
}
static struct crypto_alg cbc_des_alg = {
@@ -333,22 +337,20 @@ static int cbc_des3_encrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, &walk);
}
static int cbc_des3_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, &walk);
}
static struct crypto_alg cbc_des3_alg = {
--
1.9.0
On Fri, Feb 21, 2014 at 2:00 PM, Luis Henriques
<[email protected]> wrote:
> 3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
This was NACKed as stable patch by Greg so drop it if not too late.
Yours,
Linus Walleij
On Tue, Feb 25, 2014 at 10:24:00AM +0100, Linus Walleij wrote:
> On Fri, Feb 21, 2014 at 2:00 PM, Luis Henriques
> <[email protected]> wrote:
>
> > 3.5.7.31 -stable review patch. If anyone has any objections, please let me know.
>
> This was NACKed as stable patch by Greg so drop it if not too late.
>
> Yours,
> Linus Walleij
I've already dropped this patch, from both the 3.5 and the 3.11 kernels.
Thank you!
Cheers,
--
Lu?s