Configuration for masters and slaves is included only if W1 symbol
enabled, so no reason to check it once more.
Signed-off-by: Alexander Shiyan <[email protected]>
---
drivers/w1/masters/Kconfig | 3 +--
drivers/w1/slaves/Kconfig | 5 -----
2 files changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index efc7f07..6ffe120 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -36,13 +36,12 @@ config W1_MASTER_DS2482
config W1_MASTER_MXC
tristate "Freescale MXC 1-wire busmaster"
- depends on W1 && ARCH_MXC
+ depends on ARCH_MXC
help
Say Y here to enable MXC 1-wire host
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 5e6a3c9..1cdce80 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -72,7 +72,6 @@ config W1_SLAVE_DS2433_CRC
config W1_SLAVE_DS2760
tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
- depends on W1
help
If you enable this you will have the DS2760 battery monitor
chip support.
@@ -85,7 +84,6 @@ config W1_SLAVE_DS2760
config W1_SLAVE_DS2780
tristate "Dallas 2780 battery monitor chip"
- depends on W1
help
If you enable this you will have the DS2780 battery monitor
chip support.
@@ -98,7 +96,6 @@ config W1_SLAVE_DS2780
config W1_SLAVE_DS2781
tristate "Dallas 2781 battery monitor chip"
- depends on W1
help
If you enable this you will have the DS2781 battery monitor
chip support.
@@ -111,7 +108,6 @@ config W1_SLAVE_DS2781
config W1_SLAVE_DS28E04
tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
- depends on W1
select CRC16
help
If you enable this you will have the DS28E04-100
@@ -124,7 +120,6 @@ config W1_SLAVE_DS28E04
config W1_SLAVE_BQ27000
tristate "BQ27000 slave support"
- depends on W1
help
Say Y here if you want to use a hdq
bq27000 slave support.
--
1.8.3.2
This helps increasing build testing coverage.
To do this, __raw_{read,write}b() functions was be replaced with
simple {read,write}b() variants.
Signed-off-by: Alexander Shiyan <[email protected]>
---
drivers/w1/masters/Kconfig | 2 +-
drivers/w1/masters/mxc_w1.c | 12 ++++++------
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 6ffe120..1708b23 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -36,7 +36,7 @@ config W1_MASTER_DS2482
config W1_MASTER_MXC
tristate "Freescale MXC 1-wire busmaster"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
help
Say Y here to enable MXC 1-wire host
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 8e3de6a..67b067a 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -53,10 +53,10 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
unsigned int timeout_cnt = 0;
struct mxc_w1_device *dev = data;
- __raw_writeb(MXC_W1_CONTROL_RPP, (dev->regs + MXC_W1_CONTROL));
+ writeb(MXC_W1_CONTROL_RPP, (dev->regs + MXC_W1_CONTROL));
while (1) {
- reg_val = __raw_readb(dev->regs + MXC_W1_CONTROL);
+ reg_val = readb(dev->regs + MXC_W1_CONTROL);
if (!(reg_val & MXC_W1_CONTROL_RPP) ||
timeout_cnt > MXC_W1_RESET_TIMEOUT)
@@ -82,16 +82,16 @@ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
* datasheet.
*/
- __raw_writeb(MXC_W1_CONTROL_WR(bit), ctrl_addr);
+ writeb(MXC_W1_CONTROL_WR(bit), ctrl_addr);
while (timeout_cnt--) {
- if (!(__raw_readb(ctrl_addr) & MXC_W1_CONTROL_WR(bit)))
+ if (!(readb(ctrl_addr) & MXC_W1_CONTROL_WR(bit)))
break;
udelay(1);
}
- return !!(__raw_readb(ctrl_addr) & MXC_W1_CONTROL_RDST);
+ return !!(readb(ctrl_addr) & MXC_W1_CONTROL_RDST);
}
static int mxc_w1_probe(struct platform_device *pdev)
@@ -131,7 +131,7 @@ static int mxc_w1_probe(struct platform_device *pdev)
if (err)
return err;
- __raw_writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
+ writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
mdev->bus_master.data = mdev;
mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
--
1.8.3.2
This patch fix mxc_w1_ds2_reset_bus() return value.
According to i.MX reference manual, "presence status" reflected
in the bit 6 of control register.
Signed-off-by: Alexander Shiyan <[email protected]>
---
drivers/w1/masters/mxc_w1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 1e5d94c..6525b2c 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -74,7 +74,7 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
udelay(100);
}
- return (reg_val >> 7) & 0x1;
+ return (reg_val >> 6) & 0x1;
}
/*
--
1.8.3.2
- Remove old and currently wrong address of the FSF from license
parts of the code.
- Remove unused #include and sort remaining headers alphabetically.
- Remove unised definitions.
- Add definitions for bit-fields.
- Add missing module owner field.
Signed-off-by: Alexander Shiyan <[email protected]>
---
drivers/w1/masters/mxc_w1.c | 39 ++++++++++++++++-----------------------
1 file changed, 16 insertions(+), 23 deletions(-)
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 6525b2c..8e3de6a 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -10,24 +10,16 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
*/
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include "../w1.h"
#include "../w1_int.h"
-#include "../w1_log.h"
/* According to the mx27 Datasheet the reset procedure should take up to about
* 1350us. We set the timeout to 500*100us = 50ms for sure */
@@ -36,13 +28,13 @@
/*
* MXC W1 Register offsets
*/
-#define MXC_W1_CONTROL 0x00
-#define MXC_W1_TIME_DIVIDER 0x02
-#define MXC_W1_RESET 0x04
-#define MXC_W1_COMMAND 0x06
-#define MXC_W1_TXRX 0x08
-#define MXC_W1_INTERRUPT 0x0A
-#define MXC_W1_INTERRUPT_EN 0x0C
+#define MXC_W1_CONTROL 0x00
+# define MXC_W1_CONTROL_RDST BIT(3)
+# define MXC_W1_CONTROL_WR(x) BIT(5 - (x))
+# define MXC_W1_CONTROL_PST BIT(6)
+# define MXC_W1_CONTROL_RPP BIT(7)
+#define MXC_W1_TIME_DIVIDER 0x02
+#define MXC_W1_RESET 0x04
struct mxc_w1_device {
void __iomem *regs;
@@ -61,12 +53,12 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
unsigned int timeout_cnt = 0;
struct mxc_w1_device *dev = data;
- __raw_writeb(0x80, (dev->regs + MXC_W1_CONTROL));
+ __raw_writeb(MXC_W1_CONTROL_RPP, (dev->regs + MXC_W1_CONTROL));
while (1) {
reg_val = __raw_readb(dev->regs + MXC_W1_CONTROL);
- if (((reg_val >> 7) & 0x1) == 0 ||
+ if (!(reg_val & MXC_W1_CONTROL_RPP) ||
timeout_cnt > MXC_W1_RESET_TIMEOUT)
break;
else
@@ -74,7 +66,7 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
udelay(100);
}
- return (reg_val >> 6) & 0x1;
+ return !!(reg_val & MXC_W1_CONTROL_PST);
}
/*
@@ -90,16 +82,16 @@ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
* datasheet.
*/
- __raw_writeb((1 << (5 - bit)), ctrl_addr);
+ __raw_writeb(MXC_W1_CONTROL_WR(bit), ctrl_addr);
while (timeout_cnt--) {
- if (!((__raw_readb(ctrl_addr) >> (5 - bit)) & 0x1))
+ if (!(__raw_readb(ctrl_addr) & MXC_W1_CONTROL_WR(bit)))
break;
udelay(1);
}
- return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
+ return !!(__raw_readb(ctrl_addr) & MXC_W1_CONTROL_RDST);
}
static int mxc_w1_probe(struct platform_device *pdev)
@@ -177,6 +169,7 @@ MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
static struct platform_driver mxc_w1_driver = {
.driver = {
.name = "mxc_w1",
+ .owner = THIS_MODULE,
.of_match_table = mxc_w1_dt_ids,
},
.probe = mxc_w1_probe,
--
1.8.3.2