2015-02-06 03:31:44

by Hayes Wang

[permalink] [raw]
Subject: [PATCH net-next v2 0/7] r8152: adjust the code

V2:
Correct the subject of patch #5. Replace "link feed" with "line feed".

v1:
Code adjustment.

Hayes Wang (7):
r8152: adjust rx_bottom
r8152: adjust lpm timer
r8152: check linking status with netif_carrier_ok
r8152: check RTL8152_UNPLUG for rtl8152_close
r8152: adjust the line feed for hw_features
r8152: replace get_protocol with vlan_get_protocol
r8152: use BIT macro

drivers/net/usb/r8152.c | 99 +++++++++++++++++++++++--------------------------
1 file changed, 46 insertions(+), 53 deletions(-)

--
2.1.0


2015-02-06 03:31:46

by Hayes Wang

[permalink] [raw]
Subject: [PATCH net-next v2 1/7] r8152: adjust rx_bottom

If a error occurs when submitting rx, skip the remaining submissions
and try to submit them again next time.

Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b74a272..41a1cbc 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1643,7 +1643,7 @@ static int rx_bottom(struct r8152 *tp, int budget)
{
unsigned long flags;
struct list_head *cursor, *next, rx_queue;
- int work_done = 0;
+ int ret = 0, work_done = 0;

if (!skb_queue_empty(&tp->rx_queue)) {
while (work_done < budget) {
@@ -1734,7 +1734,18 @@ find_next_rx:
}

submit:
- r8152_submit_rx(tp, agg, GFP_ATOMIC);
+ if (!ret) {
+ ret = r8152_submit_rx(tp, agg, GFP_ATOMIC);
+ } else {
+ urb->actual_length = 0;
+ list_add_tail(&agg->list, next);
+ }
+ }
+
+ if (!list_empty(&rx_queue)) {
+ spin_lock_irqsave(&tp->rx_lock, flags);
+ list_splice_tail(&rx_queue, &tp->rx_done);
+ spin_unlock_irqrestore(&tp->rx_lock, flags);
}

out1:
--
2.1.0

2015-02-06 03:33:52

by Hayes Wang

[permalink] [raw]
Subject: [PATCH net-next v2 2/7] r8152: adjust lpm timer

Set LPM timer to 500us, except for RTL_VER_04 which doesn't link at
USB 3.0.

Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 41a1cbc..ff122fa 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3256,10 +3256,10 @@ static void r8153_init(struct r8152 *tp)

ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL);
ocp_data &= ~LPM_TIMER_MASK;
- if (tp->udev->speed == USB_SPEED_SUPER)
- ocp_data |= LPM_TIMER_500US;
- else
+ if (tp->version == RTL_VER_04 && tp->udev->speed != USB_SPEED_SUPER)
ocp_data |= LPM_TIMER_500MS;
+ else
+ ocp_data |= LPM_TIMER_500US;
ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);

ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
--
2.1.0

2015-02-06 03:31:48

by Hayes Wang

[permalink] [raw]
Subject: [PATCH net-next v2 3/7] r8152: check linking status with netif_carrier_ok

Replace (tp->speed & LINK_STATUS) with netif_carrier_ok().

Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index ff122fa..6667809 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -581,7 +581,6 @@ struct r8152 {
u16 ocp_base;
u8 *intr_buff;
u8 version;
- u8 speed;
};

enum rtl_version {
@@ -1157,12 +1156,12 @@ static void intr_callback(struct urb *urb)

d = urb->transfer_buffer;
if (INTR_LINK & __le16_to_cpu(d[0])) {
- if (!(tp->speed & LINK_STATUS)) {
+ if (!netif_carrier_ok(tp->netdev)) {
set_bit(RTL8152_LINK_CHG, &tp->flags);
schedule_delayed_work(&tp->schedule, 0);
}
} else {
- if (tp->speed & LINK_STATUS) {
+ if (netif_carrier_ok(tp->netdev)) {
set_bit(RTL8152_LINK_CHG, &tp->flags);
schedule_delayed_work(&tp->schedule, 0);
}
@@ -1894,7 +1893,7 @@ static void rtl8152_set_rx_mode(struct net_device *netdev)
{
struct r8152 *tp = netdev_priv(netdev);

- if (tp->speed & LINK_STATUS) {
+ if (netif_carrier_ok(netdev)) {
set_bit(RTL8152_SET_RX_MODE, &tp->flags);
schedule_delayed_work(&tp->schedule, 0);
}
@@ -2918,21 +2917,20 @@ static void set_carrier(struct r8152 *tp)
speed = rtl8152_get_speed(tp);

if (speed & LINK_STATUS) {
- if (!(tp->speed & LINK_STATUS)) {
+ if (!netif_carrier_ok(netdev)) {
tp->rtl_ops.enable(tp);
set_bit(RTL8152_SET_RX_MODE, &tp->flags);
netif_carrier_on(netdev);
rtl_start_rx(tp);
}
} else {
- if (tp->speed & LINK_STATUS) {
+ if (netif_carrier_ok(netdev)) {
netif_carrier_off(netdev);
napi_disable(&tp->napi);
tp->rtl_ops.disable(tp);
napi_enable(&tp->napi);
}
}
- tp->speed = speed;
}

static void rtl_work_func_t(struct work_struct *work)
@@ -2964,7 +2962,7 @@ static void rtl_work_func_t(struct work_struct *work)

/* don't schedule napi before linking */
if (test_bit(SCHEDULE_NAPI, &tp->flags) &&
- (tp->speed & LINK_STATUS)) {
+ netif_carrier_ok(tp->netdev)) {
clear_bit(SCHEDULE_NAPI, &tp->flags);
napi_schedule(&tp->napi);
}
@@ -2987,8 +2985,7 @@ static int rtl8152_open(struct net_device *netdev)
if (res)
goto out;

- /* set speed to 0 to avoid autoresume try to submit rx */
- tp->speed = 0;
+ netif_carrier_off(netdev);

res = usb_autopm_get_interface(tp->intf);
if (res < 0) {
@@ -3005,7 +3002,7 @@ static int rtl8152_open(struct net_device *netdev)
cancel_delayed_work_sync(&tp->schedule);

/* disable the tx/rx, if the workqueue has enabled them. */
- if (tp->speed & LINK_STATUS)
+ if (netif_carrier_ok(netdev))
tp->rtl_ops.disable(tp);
}

@@ -3014,7 +3011,6 @@ static int rtl8152_open(struct net_device *netdev)
rtl8152_set_speed(tp, AUTONEG_ENABLE,
tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
DUPLEX_FULL);
- tp->speed = 0;
netif_carrier_off(netdev);
netif_start_queue(netdev);
set_bit(WORK_ENABLE, &tp->flags);
@@ -3340,7 +3336,7 @@ static int rtl8152_resume(struct usb_interface *intf)
rtl_runtime_suspend_enable(tp, false);
clear_bit(SELECTIVE_SUSPEND, &tp->flags);
set_bit(WORK_ENABLE, &tp->flags);
- if (tp->speed & LINK_STATUS)
+ if (netif_carrier_ok(tp->netdev))
rtl_start_rx(tp);
} else {
tp->rtl_ops.up(tp);
@@ -3348,7 +3344,6 @@ static int rtl8152_resume(struct usb_interface *intf)
tp->mii.supports_gmii ?
SPEED_1000 : SPEED_100,
DUPLEX_FULL);
- tp->speed = 0;
netif_carrier_off(tp->netdev);
set_bit(WORK_ENABLE, &tp->flags);
}
--
2.1.0

2015-02-06 03:33:15

by Hayes Wang

[permalink] [raw]
Subject: [PATCH net-next v2 4/7] r8152: check RTL8152_UNPLUG for rtl8152_close

It is unnecessary to accress the hw register if the device is unplugged.

Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 6667809..aade7b5 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3046,7 +3046,7 @@ static int rtl8152_close(struct net_device *netdev)
netif_stop_queue(netdev);

res = usb_autopm_get_interface(tp->intf);
- if (res < 0) {
+ if (res < 0 || test_bit(RTL8152_UNPLUG, &tp->flags)) {
rtl_drop_queued_tx(tp);
rtl_stop_rx(tp);
} else {
--
2.1.0

2015-02-06 03:31:54

by Hayes Wang

[permalink] [raw]
Subject: [PATCH net-next v2 5/7] r8152: adjust the line feed for hw_features

Keep NETIF_F_HW_VLAN_CTAG_RX and NETIF_F_HW_VLAN_CTAG_TX at the
same line.

Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index aade7b5..8bdd477 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3908,8 +3908,7 @@ static int rtl8152_probe(struct usb_interface *intf,
netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
NETIF_F_TSO | NETIF_F_FRAGLIST |
NETIF_F_IPV6_CSUM | NETIF_F_TSO6 |
- NETIF_F_HW_VLAN_CTAG_RX |
- NETIF_F_HW_VLAN_CTAG_TX;
+ NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX;
netdev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
NETIF_F_HIGHDMA | NETIF_F_FRAGLIST |
NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
--
2.1.0

2015-02-06 03:31:58

by Hayes Wang

[permalink] [raw]
Subject: [PATCH net-next v2 6/7] r8152: replace get_protocol with vlan_get_protocol

vlan_get_protocol() has been defined and use it to replace
get_protocol().

Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 16 ++--------------
1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 8bdd477..24e6aef9 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1330,18 +1330,6 @@ static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
return agg;
}

-static inline __be16 get_protocol(struct sk_buff *skb)
-{
- __be16 protocol;
-
- if (skb->protocol == htons(ETH_P_8021Q))
- protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
- else
- protocol = skb->protocol;
-
- return protocol;
-}
-
/* r8152_csum_workaround()
* The hw limites the value the transport offset. When the offset is out of the
* range, calculate the checksum by sw.
@@ -1447,7 +1435,7 @@ static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
goto unavailable;
}

- switch (get_protocol(skb)) {
+ switch (vlan_get_protocol(skb)) {
case htons(ETH_P_IP):
opts1 |= GTSENDV4;
break;
@@ -1478,7 +1466,7 @@ static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
goto unavailable;
}

- switch (get_protocol(skb)) {
+ switch (vlan_get_protocol(skb)) {
case htons(ETH_P_IP):
opts2 |= IPV4_CS;
ip_protocol = ip_hdr(skb)->protocol;
--
2.1.0

2015-02-06 03:31:57

by Hayes Wang

[permalink] [raw]
Subject: [PATCH net-next v2 7/7] r8152: use BIT macro

Use BIT macro to replace (1 << bits).

Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 24e6aef9..5980ac6 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -489,16 +489,16 @@ struct rx_desc {
#define RX_LEN_MASK 0x7fff

__le32 opts2;
-#define RD_UDP_CS (1 << 23)
-#define RD_TCP_CS (1 << 22)
-#define RD_IPV6_CS (1 << 20)
-#define RD_IPV4_CS (1 << 19)
+#define RD_UDP_CS BIT(23)
+#define RD_TCP_CS BIT(22)
+#define RD_IPV6_CS BIT(20)
+#define RD_IPV4_CS BIT(19)

__le32 opts3;
-#define IPF (1 << 23) /* IP checksum fail */
-#define UDPF (1 << 22) /* UDP checksum fail */
-#define TCPF (1 << 21) /* TCP checksum fail */
-#define RX_VLAN_TAG (1 << 16)
+#define IPF BIT(23) /* IP checksum fail */
+#define UDPF BIT(22) /* UDP checksum fail */
+#define TCPF BIT(21) /* TCP checksum fail */
+#define RX_VLAN_TAG BIT(16)

__le32 opts4;
__le32 opts5;
@@ -507,24 +507,24 @@ struct rx_desc {

struct tx_desc {
__le32 opts1;
-#define TX_FS (1 << 31) /* First segment of a packet */
-#define TX_LS (1 << 30) /* Final segment of a packet */
-#define GTSENDV4 (1 << 28)
-#define GTSENDV6 (1 << 27)
+#define TX_FS BIT(31) /* First segment of a packet */
+#define TX_LS BIT(30) /* Final segment of a packet */
+#define GTSENDV4 BIT(28)
+#define GTSENDV6 BIT(27)
#define GTTCPHO_SHIFT 18
#define GTTCPHO_MAX 0x7fU
#define TX_LEN_MAX 0x3ffffU

__le32 opts2;
-#define UDP_CS (1 << 31) /* Calculate UDP/IP checksum */
-#define TCP_CS (1 << 30) /* Calculate TCP/IP checksum */
-#define IPV4_CS (1 << 29) /* Calculate IPv4 checksum */
-#define IPV6_CS (1 << 28) /* Calculate IPv6 checksum */
+#define UDP_CS BIT(31) /* Calculate UDP/IP checksum */
+#define TCP_CS BIT(30) /* Calculate TCP/IP checksum */
+#define IPV4_CS BIT(29) /* Calculate IPv4 checksum */
+#define IPV6_CS BIT(28) /* Calculate IPv6 checksum */
#define MSS_SHIFT 17
#define MSS_MAX 0x7ffU
#define TCPHO_SHIFT 17
#define TCPHO_MAX 0x7ffU
-#define TX_VLAN_TAG (1 << 16)
+#define TX_VLAN_TAG BIT(16)
};

struct r8152;
--
2.1.0

2015-02-08 06:46:56

by David Miller

[permalink] [raw]
Subject: Re: [PATCH net-next v2 0/7] r8152: adjust the code

From: Hayes Wang <[email protected]>
Date: Fri, 6 Feb 2015 11:30:44 +0800

> V2:
> Correct the subject of patch #5. Replace "link feed" with "line feed".
>
> v1:
> Code adjustment.

Series applied, thanks.