With the introduccion of the new keyboard backlight
implementation, the *_timeout_store function is
broken, as it only supports the first kbd_type.
This patch adapt such function for the new kbd_type,
as well as convert from using sscanf to kstrtoint.
Signed-off-by: Azael Avalos <[email protected]>
---
Changes since v1:
- Check for timeout values depending on kbd_type
- Removed some misleading comments
Note: I'll be out of town until the next weekend,
in case something else needs to be changed, I'll
catch up whenever I'm back.
drivers/platform/x86/toshiba_acpi.c | 38 ++++++++++++++++++++++++++++---------
1 file changed, 29 insertions(+), 9 deletions(-)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 5d509ea..f360dac 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -1453,18 +1453,38 @@ static ssize_t toshiba_kbd_bl_timeout_store(struct device *dev,
const char *buf, size_t count)
{
struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
- int time = -1;
+ int time;
+ int ret;
- if (sscanf(buf, "%i", &time) != 1 && (time < 0 || time > 60))
- return -EINVAL;
+ ret = kstrtoint(buf, 0, &time);
+ if (ret)
+ return ret;
- /* Set the Keyboard Backlight Timeout: 0-60 seconds */
- if (time != -1 && toshiba->kbd_time != time) {
+ /* Check for supported values depending on kbd_type */
+ if (toshiba->kbd_type == 1) {
+ if (time < 0 || time > 60)
+ return -EINVAL;
+ } else if (toshiba->kbd_type == 2) {
+ if (time < 1 || time > 60)
+ return -EINVAL;
+ }
+
+ /* Set the Keyboard Backlight Timeout */
+
+ /* Only make a change if the actual timeout has changed */
+ if (toshiba->kbd_time != time) {
+ /* Shift the time to "base time" (0x3c0000 == 60 seconds) */
time = time << HCI_MISC_SHIFT;
- time = (toshiba->kbd_mode == SCI_KBD_MODE_AUTO) ?
- time + 1 : time + 2;
- if (toshiba_kbd_illum_status_set(toshiba, time) < 0)
- return -EIO;
+ /* OR the "base time" to the actual method format */
+ if (toshiba->kbd_type == 1)
+ time |= SCI_KBD_MODE_FNZ;
+ else if (toshiba->kbd_type == 2)
+ time |= SCI_KBD_MODE_AUTO;
+
+ ret = toshiba_kbd_illum_status_set(toshiba, time);
+ if (ret)
+ return ret;
+
toshiba->kbd_time = time >> HCI_MISC_SHIFT;
}
--
2.0.0
Hi Azael,
On Sat, Oct 04, 2014 at 12:02:21PM -0600, Azael Avalos wrote:
> With the introduccion of the new keyboard backlight
introduction
> implementation, the *_timeout_store function is
> broken, as it only supports the first kbd_type.
>
> This patch adapt such function for the new kbd_type,
adapts
> as well as convert from using sscanf to kstrtoint.
converts
>
Functional changes look good to me, thank you.
I've made a couple minor formatting corrections in the interest of time. In
the future, please check your patches with checkpatch.pl and consider using a
spell checker in your $EDITOR for commit messages. Using git am to apply your
own patches would also have caught the whitespace error.
> Signed-off-by: Azael Avalos <[email protected]>
Queued to testing, I'll push to for-next tomorrow(ish), which should give us
enough time to make 3.18 since Linus pushed out the merge window a bit.
> ---
> Changes since v1:
> - Check for timeout values depending on kbd_type
> - Removed some misleading comments
>
> Note: I'll be out of town until the next weekend,
> in case something else needs to be changed, I'll
> catch up whenever I'm back.
>
> drivers/platform/x86/toshiba_acpi.c | 38 ++++++++++++++++++++++++++++---------
> 1 file changed, 29 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
> index 5d509ea..f360dac 100644
> --- a/drivers/platform/x86/toshiba_acpi.c
> +++ b/drivers/platform/x86/toshiba_acpi.c
> @@ -1453,18 +1453,38 @@ static ssize_t toshiba_kbd_bl_timeout_store(struct device *dev,
> const char *buf, size_t count)
> {
> struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
> - int time = -1;
> + int time;
> + int ret;
>
> - if (sscanf(buf, "%i", &time) != 1 && (time < 0 || time > 60))
> - return -EINVAL;
> + ret = kstrtoint(buf, 0, &time);
> + if (ret)
> + return ret;
>
> - /* Set the Keyboard Backlight Timeout: 0-60 seconds */
> - if (time != -1 && toshiba->kbd_time != time) {
> + /* Check for supported values depending on kbd_type */
> + if (toshiba->kbd_type == 1) {
> + if (time < 0 || time > 60)
> + return -EINVAL;
> + } else if (toshiba->kbd_type == 2) {
> + if (time < 1 || time > 60)
> + return -EINVAL;
> + }
> +
> + /* Set the Keyboard Backlight Timeout */
> +
^ Tab at beginning of otherwise empty line.
Thanks,
Darren
> + /* Only make a change if the actual timeout has changed */
> + if (toshiba->kbd_time != time) {
> + /* Shift the time to "base time" (0x3c0000 == 60 seconds) */
> time = time << HCI_MISC_SHIFT;
> - time = (toshiba->kbd_mode == SCI_KBD_MODE_AUTO) ?
> - time + 1 : time + 2;
> - if (toshiba_kbd_illum_status_set(toshiba, time) < 0)
> - return -EIO;
> + /* OR the "base time" to the actual method format */
> + if (toshiba->kbd_type == 1)
> + time |= SCI_KBD_MODE_FNZ;
> + else if (toshiba->kbd_type == 2)
> + time |= SCI_KBD_MODE_AUTO;
> +
> + ret = toshiba_kbd_illum_status_set(toshiba, time);
> + if (ret)
> + return ret;
> +
> toshiba->kbd_time = time >> HCI_MISC_SHIFT;
> }
>
> --
> 2.0.0
>
>
--
Darren Hart
Intel Open Source Technology Center