From: Zefan Li <[email protected]>
This is the start of the stable review cycle for the 3.4.105 release.
There are 91 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by 2014年 11月 29日 星期六 08:05:38 UTC.
Anything received after that time might be too late.
A combined patch relative to 3.4.104 will be posted as an additional
response to this. A shortlog and diffstat can be found below.
thanks,
Zefan Li
--------------------
Al Viro (2):
get rid of propagate_umount() mistakenly treating slaves as busy.
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
Alban Crequy (1):
cgroup: reject cgroup names with ' '
Alex Deucher (1):
drm/radeon: add connector quirk for fujitsu board
Andreas Rohner (1):
nilfs2: fix data loss with mmap()
Andrew Hunter (1):
jiffies: Fix timeval conversion to jiffies
Anton Altaparmakov (1):
Fix nasty 32-bit overflow bug in buffer i/o code.
Aurelien Jarno (1):
MIPS: ZBOOT: add missing <linux/string.h> include
Ben Hutchings (1):
rtl8192ce: Fix null dereference in watchdog
Benjamin Poirier (1):
net: Do not enable tx-nocache-copy by default
Bjørn Mork (2):
USB: sierra: avoid CDC class functions on "68A3" devices
USB: sierra: add 1199:68AA device ID
Charles Keepax (1):
ASoC: samsung-i2s: Check secondary DAI exists before referencing
Christian Borntraeger (1):
KVM: s390: Fix user triggerable bug in dead code
Clemens Ladisch (1):
ALSA: pcm: fix fifo_size frame calculation
Cong Wang (1):
perf: Fix a race condition in perf_remove_from_context()
David Dueck (1):
can: at91_can: add missing prepare and unprepare of the clock
David Jander (2):
can: flexcan: correctly initialize mailboxes
can: flexcan: implement workaround for errata ERR005829
Dmitry Torokhov (1):
Input: synaptics - add support for ForcePads
Eliad Peller (1):
regulatory: add NUL to alpha2
Eric W. Biederman (1):
mnt: Only change user settable mount flags in remount
Felipe Balbi (3):
usb: dwc3: core: fix order of PM runtime calls
usb: host: xhci: fix compliance mode workaround
bluetooth: hci_ldisc: fix deadlock condition
Guillaume Nault (1):
l2tp: fix race while getting PMTU on PPP pseudo-wire
Hannes Frederic Sowa (1):
ipv6: reuse ip6_frag_id from ip6_ufo_append_data
Hans de Goede (3):
Input: elantech - fix detection of touchpad on ASUS s301l
Input: i8042 - add Fujitsu U574 to no_timeout dmi table
Input: i8042 - add nomux quirk for Avatar AVIU-145A6
Honggang Li (1):
percpu: free percpu allocation info for uniprocessor system
Ilya Dryomov (2):
libceph: add process_one_ticket() helper
libceph: do not hard code max auth ticket len
James Bottomley (1):
Fix spurious request sense in error handling
James Ralston (2):
ahci: Add Device IDs for Intel 9 Series PCH
ata_piix: Add Device IDs for Intel 9 Series PCH
Jens Axboe (1):
genhd: fix leftover might_sleep() in blk_free_devt()
Jiri Kosina (1):
ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock
Joe Lawrence (1):
usb: hub: take hub->hdev reference when processing from eventlist
Joern Engel (1):
iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
Johan Hovold (1):
USB: ftdi_sio: add support for NOVITUS Bono E thermal printer
Johannes Berg (1):
nl80211: clear skb cb before passing to netlink
John David Anglin (1):
parisc: Only use -mfast-indirect-calls option for 32-bit kernel builds
John Sung (1):
Input: serport - add compat handling for SPIOCSTYPE ioctl
Joseph Qi (1):
ocfs2/dlm: do not get resource spinlock if lockres is new
Josh Triplett (1):
init/Kconfig: Hide printk log config if CONFIG_PRINTK=n
Keith Busch (1):
block: Fix dev_t minor allocation lifetime
Larry Finger (1):
rtlwifi: rtl8192cu: Add new ID
Marc Kleine-Budde (2):
can: flexcan: mark TX mailbox as TX_INACTIVE
can: flexcan: put TX mailbox into TX_INACTIVE mode after tx-complete
Marcelo Ricardo Leitner (3):
ipv4: move route garbage collector to work queue
ipv4: avoid parallel route cache gc executions
ipv4: disable bh while doing route gc
Mark (4):
storage: Add single-LUN quirk for Jaz USB Adapter
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI
Adapter
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI
adapter
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
Mark Brown (1):
regmap: Fix handling of volatile registers for format_write() chips
Markos Chandras (1):
MIPS: mcount: Adjust stack pointer for static trace in MIPS32
Mathias Krause (1):
drm/i915: Remove bogus __init annotation from DMI callbacks
Mathias Nyman (1):
xhci: Fix null pointer dereference if xhci initialization fails
Mel Gorman (1):
mm: migrate: Close race between migration completion and mprotect
Mike Christie (1):
libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
Miklos Szeredi (1):
shmem: fix nlink for rename overwrite directory
Mikulas Patocka (1):
dm crypt: fix access beyond the end of allocated space
Murali Karicheri (1):
ahci: add pcid for Marvel 0x9182 controller
Narendra K (1):
ixgbevf: Prevent RX/TX statistics getting reset to zero
Nicholas Bellinger (1):
iscsi-target: Fix memory corruption in
iscsit_logout_post_handler_diffcid
Pawel Moll (1):
perf: Handle compat ioctl
Peter Zijlstra (1):
perf: fix perf bug in fork()
Richard Larocque (3):
alarmtimer: Return relative times in timer_gettime
alarmtimer: Do not signal SIGEV_NONE timers
alarmtimer: Lock k_itimer during timer callback
Robin Murphy (1):
ARM: 8165/1: alignment: don't break misaligned NEON load/store
Ross Lagerwall (1):
xen/manage: Always freeze/thaw processes when suspend/resuming
Sage Weil (1):
libceph: gracefully handle large reply messages from the mon
Sergio Gelato (1):
NFS: fix stable regression
Takashi Iwai (1):
ALSA: hda - Fix COEF setups for ALC1150 codec
Taylor Braun-Jones (1):
USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker device
Tejun Heo (2):
percpu: fix pcpu_alloc_pages() failure path
percpu: perform tlb flush after pcpu_map_pages() failure
Theodore Ts'o (2):
ext4: propagate errors up to ext4_find_entry()'s callers
ext4: avoid trying to kfree an ERR_PTR pointer
Thomas Gleixner (1):
futex: Unlock hb->lock in futex_wait_requeue_pi() error path
Thomas Hellstrom (1):
drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle
Thomas Pugliese (1):
uwb: init beacon cache entry before registering uwb device
Trond Myklebust (1):
NFSv4: Fix another bug in the close/open_downgrade code
Wanpeng Li (1):
sched: Fix unreleased llc_shared_mask bit during CPU hotplug
Xiubo Li (1):
ASoC: core: fix possible ZERO_SIZE_PTR pointer dereferencing error.
Zefan Li (2):
sched: add macros to define bitops for task atomic flags
cpuset: PF_SPREAD_PAGE and PF_SPREAD_SLAB should be atomic flags
Documentation/cgroups/cpusets.txt | 6 +-
arch/arm/mm/alignment.c | 3 +
arch/mips/boot/compressed/decompress.c | 1 +
arch/mips/kernel/mcount.S | 12 +
arch/parisc/Makefile | 7 +-
arch/s390/kvm/kvm-s390.c | 11 -
arch/x86/kernel/smpboot.c | 3 +
block/genhd.c | 20 +-
block/partition-generic.c | 2 +-
drivers/acpi/processor_idle.c | 4 +-
drivers/ata/ahci.c | 10 +
drivers/ata/ata_piix.c | 8 +
drivers/base/regmap/regmap.c | 2 +-
drivers/bluetooth/hci_ldisc.c | 25 ++-
drivers/bluetooth/hci_uart.h | 2 +
drivers/gpu/drm/i915/intel_bios.c | 2 +-
drivers/gpu/drm/i915/intel_crt.c | 2 +-
drivers/gpu/drm/i915/intel_lvds.c | 2 +-
drivers/gpu/drm/radeon/radeon_atombios.c | 7 +
drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 3 +-
drivers/input/mouse/elantech.c | 7 +
drivers/input/mouse/synaptics.c | 68 ++++--
drivers/input/mouse/synaptics.h | 11 +
drivers/input/serio/i8042-x86ia64io.h | 15 ++
drivers/input/serio/serport.c | 45 +++-
drivers/md/dm-crypt.c | 20 +-
drivers/net/can/at91_can.c | 8 +-
drivers/net/can/flexcan.c | 41 +++-
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 12 -
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 3 +
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
drivers/scsi/libiscsi.c | 10 +
drivers/scsi/scsi_error.c | 9 +
drivers/target/iscsi/iscsi_target.c | 4 +-
drivers/target/iscsi/iscsi_target_parameters.c | 2 +-
drivers/usb/core/hub.c | 4 +-
drivers/usb/dwc3/core.c | 6 +-
drivers/usb/host/xhci-hub.c | 8 +-
drivers/usb/host/xhci-mem.c | 2 +-
drivers/usb/serial/ftdi_sio.c | 3 +
drivers/usb/serial/ftdi_sio_ids.h | 12 +
drivers/usb/serial/sierra.c | 9 +-
drivers/usb/storage/unusual_devs.h | 38 ++++
drivers/uwb/lc-dev.c | 13 +-
drivers/xen/manage.c | 7 -
fs/buffer.c | 6 +-
fs/ext4/ext4.h | 2 +-
fs/ext4/namei.c | 32 ++-
fs/ext4/resize.c | 2 +
fs/namei.c | 30 +--
fs/namespace.c | 6 +-
fs/nfs/nfs4proc.c | 30 +--
fs/nfsd/vfs.c | 3 +
fs/nilfs2/inode.c | 7 +-
fs/ocfs2/dlm/dlmmaster.c | 18 +-
fs/pnode.c | 4 +-
include/linux/cpuset.h | 4 +-
include/linux/jiffies.h | 12 -
include/linux/mount.h | 4 +-
include/linux/sched.h | 25 ++-
include/net/regulatory.h | 2 +-
init/Kconfig | 1 +
kernel/cgroup.c | 5 +
kernel/cpuset.c | 9 +-
kernel/events/core.c | 36 ++-
kernel/fork.c | 5 +-
kernel/futex.c | 1 +
kernel/time.c | 54 +++--
kernel/time/alarmtimer.c | 40 +++-
mm/migrate.c | 5 +-
mm/percpu-vm.c | 22 +-
mm/percpu.c | 2 +
mm/shmem.c | 4 +-
mm/slab.c | 4 +-
net/ceph/auth_x.c | 256 ++++++++++++----------
net/ceph/mon_client.c | 8 +
net/core/dev.c | 5 -
net/ipv4/route.c | 58 +++--
net/ipv6/udp.c | 2 +-
net/l2tp/l2tp_ppp.c | 3 +-
net/wireless/nl80211.c | 6 +
scripts/tags.sh | 10 +-
sound/core/pcm_lib.c | 8 +-
sound/pci/hda/patch_realtek.c | 2 +
sound/soc/samsung/i2s.c | 2 +-
sound/soc/soc-core.c | 2 +-
86 files changed, 850 insertions(+), 377 deletions(-)
--
1.9.1
From: Christian Borntraeger <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 614a80e474b227cace52fd6e3c790554db8a396e upstream.
In the early days, we had some special handling for the
KVM_EXIT_S390_SIEIC exit, but this was gone in 2009 with commit
d7b0b5eb3000 (KVM: s390: Make psw available on all exits, not
just a subset).
Now this switch statement is just a sanity check for userspace
not messing with the kvm_run structure. Unfortunately, this
allows userspace to trigger a kernel BUG. Let's just remove
this switch statement.
Signed-off-by: Christian Borntraeger <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
[lizf: Backported to 3.4:
- adjust context
- no KVM_EXIT_S390_TSCH and KVM_EXIT_DEBUG in 3.4]
Signed-off-by: Zefan Li <[email protected]>
---
arch/s390/kvm/kvm-s390.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 53c973e..0f250d1 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -566,17 +566,6 @@ rerun_vcpu:
BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL);
- switch (kvm_run->exit_reason) {
- case KVM_EXIT_S390_SIEIC:
- case KVM_EXIT_UNKNOWN:
- case KVM_EXIT_INTR:
- case KVM_EXIT_S390_RESET:
- case KVM_EXIT_S390_UCONTROL:
- break;
- default:
- BUG();
- }
-
vcpu->arch.sie_block->gpsw.mask = kvm_run->psw_mask;
vcpu->arch.sie_block->gpsw.addr = kvm_run->psw_addr;
if (kvm_run->kvm_dirty_regs & KVM_SYNC_PREFIX) {
--
1.9.1
From: Mark Brown <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 5844a8b9d98ec11ce1d77610daacf3f0a0e14715 upstream.
A previous over-zealous factorisation of code means that we only treat
registers as volatile if they are readable. For most devices this is fine
since normally most registers can be read and volatility implies
readability but for format_write() devices where there is no readback from
the hardware and we use volatility to mean simply uncacheability this means
that we end up treating all registers as cacheble.
A bigger refactoring of the code to clarify this is in order but as a fix
make a minimal change and only check readability when checking volatility
if there is no format_write() operation defined for the device.
Signed-off-by: Mark Brown <[email protected]>
Tested-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/base/regmap/regmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index ca72d1f..e554542 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -48,7 +48,7 @@ bool regmap_readable(struct regmap *map, unsigned int reg)
bool regmap_volatile(struct regmap *map, unsigned int reg)
{
- if (!regmap_readable(map, reg))
+ if (!map->format.format_write && !regmap_readable(map, reg))
return false;
if (map->volatile_reg)
--
1.9.1
From: Al Viro <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 88b368f27a094277143d8ecd5a056116f6a41520 upstream.
The check in __propagate_umount() ("has somebody explicitly mounted
something on that slave?") is done *before* taking the already doomed
victims out of the child lists.
Signed-off-by: Al Viro <[email protected]>
[lizf: Backported to 3.4:
- adjust context
- s/hlist_for_each_entry/list_for_each_entry/]
Signed-off-by: Zefan Li <[email protected]>
---
fs/namespace.c | 4 +++-
fs/pnode.c | 4 +++-
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/namespace.c b/fs/namespace.c
index 4e46539..2985879 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1066,6 +1066,9 @@ void umount_tree(struct mount *mnt, int propagate, struct list_head *kill)
for (p = mnt; p; p = next_mnt(p, mnt))
list_move(&p->mnt_hash, &tmp_list);
+ list_for_each_entry(p, &tmp_list, mnt_hash)
+ list_del_init(&p->mnt_child);
+
if (propagate)
propagate_umount(&tmp_list);
@@ -1076,7 +1079,6 @@ void umount_tree(struct mount *mnt, int propagate, struct list_head *kill)
if (p->mnt_ns)
__mnt_make_shortterm(p);
p->mnt_ns = NULL;
- list_del_init(&p->mnt_child);
if (mnt_has_parent(p)) {
p->mnt_parent->mnt_ghosts++;
dentry_reset_mounted(p->mnt_mountpoint);
diff --git a/fs/pnode.c b/fs/pnode.c
index ab5fa9e..f61dcb4 100644
--- a/fs/pnode.c
+++ b/fs/pnode.c
@@ -333,8 +333,10 @@ static void __propagate_umount(struct mount *mnt)
* umount the child only if the child has no
* other children
*/
- if (child && list_empty(&child->mnt_mounts))
+ if (child && list_empty(&child->mnt_mounts)) {
+ list_del_init(&child->mnt_child);
list_move_tail(&child->mnt_hash, &mnt->mnt_hash);
+ }
}
}
--
1.9.1
From: Mathias Krause <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit bbe1c2740d3a25aa1dbe5d842d2ff09cddcdde0a upstream.
The __init annotations for the DMI callback functions are wrong as this
code can be called even after the module has been initialized, e.g. like
this:
# echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove
# modprobe i915
# echo 1 > /sys/bus/pci/rescan
The first command will remove the PCI device from the kernel's device
list so the second command won't see it right away. But as it registers
a PCI driver it'll see it on the third command. If the system happens to
match one of the DMI table entries we'll try to call a function in long
released memory and generate an Oops, at best.
Fix this by removing the bogus annotation.
Modpost should have caught that one but it ignores section reference
mismatches from the .rodata section. :/
Fixes: 25e341cfc33d ("drm/i915: quirk away broken OpRegion VBT")
Fixes: 8ca4013d702d ("CHROMIUM: i915: Add DMI override to skip CRT...")
Fixes: 425d244c8670 ("drm/i915: ignore LVDS on intel graphics systems...")
Signed-off-by: Mathias Krause <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Duncan Laurie <[email protected]>
Cc: Jarod Wilson <[email protected]>
Cc: Rusty Russell <[email protected]> # Can modpost be fixed?
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/gpu/drm/i915/intel_bios.c | 2 +-
drivers/gpu/drm/i915/intel_crt.c | 2 +-
drivers/gpu/drm/i915/intel_lvds.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index a2c9e56..d9e359a 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -651,7 +651,7 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
}
-static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
+static int intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Falling back to manually reading VBT from "
"VBIOS ROM for %s\n",
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index a83f7ac..b4f71c2 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -564,7 +564,7 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
.destroy = intel_encoder_destroy,
};
-static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
+static int intel_no_crt_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
return 1;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index b695ab4..77190cc 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -619,7 +619,7 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
.destroy = intel_encoder_destroy,
};
-static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+static int intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
return 1;
--
1.9.1
From: Takashi Iwai <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit acf08081adb5e8fe0519eb97bb49797ef52614d6 upstream.
ALC1150 codec seems to need the COEF- and PLL-setups just like its
compatible ALC882 codec. Some machines (e.g. SunMicro X10SAT) show
the problem like too low output volumes unless the COEF setup is
applied.
Reported-and-tested-by: Dana Goyette <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
sound/pci/hda/patch_realtek.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 36284b8..9461a00 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -811,6 +811,7 @@ static void alc_auto_init_amp(struct hda_codec *codec, int type)
case 0x10ec0885:
case 0x10ec0887:
/*case 0x10ec0889:*/ /* this causes an SPDIF problem */
+ case 0x10ec0900:
alc889_coef_init(codec);
break;
case 0x10ec0888:
@@ -5516,6 +5517,7 @@ static int patch_alc882(struct hda_codec *codec)
switch (codec->vendor_id) {
case 0x10ec0882:
case 0x10ec0885:
+ case 0x10ec0900:
break;
default:
/* ALC883 and variants */
--
1.9.1
From: Jiri Kosina <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 6726655dfdd2dc60c035c690d9f10cb69d7ea075 upstream.
There is a following AB-BA dependency between cpu_hotplug.lock and
cpuidle_lock:
1) cpu_hotplug.lock -> cpuidle_lock
enable_nonboot_cpus()
_cpu_up()
cpu_hotplug_begin()
LOCK(cpu_hotplug.lock)
cpu_notify()
...
acpi_processor_hotplug()
cpuidle_pause_and_lock()
LOCK(cpuidle_lock)
2) cpuidle_lock -> cpu_hotplug.lock
acpi_os_execute_deferred() workqueue
...
acpi_processor_cst_has_changed()
cpuidle_pause_and_lock()
LOCK(cpuidle_lock)
get_online_cpus()
LOCK(cpu_hotplug.lock)
Fix this by reversing the order acpi_processor_cst_has_changed() does
thigs -- let it first execute the protection against CPU hotplug by
calling get_online_cpus() and obtain the cpuidle lock only after that (and
perform the symmentric change when allowing CPUs hotplug again and
dropping cpuidle lock).
Spotted by lockdep.
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/acpi/processor_idle.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6cba428..e1180ce 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1195,9 +1195,9 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
- cpuidle_pause_and_lock();
/* Protect against cpu-hotplug */
get_online_cpus();
+ cpuidle_pause_and_lock();
/* Disable all cpuidle devices */
for_each_online_cpu(cpu) {
@@ -1222,8 +1222,8 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
cpuidle_enable_device(&_pr->power.dev);
}
}
- put_online_cpus();
cpuidle_resume_and_unlock();
+ put_online_cpus();
}
return 0;
--
1.9.1
From: Honggang Li <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 3189eddbcafcc4d827f7f19facbeddec4424eba8 upstream.
Currently, only SMP system free the percpu allocation info.
Uniprocessor system should free it too. For example, one x86 UML
virtual machine with 256MB memory, UML kernel wastes one page memory.
Signed-off-by: Honggang Li <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
mm/percpu.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/mm/percpu.c b/mm/percpu.c
index 13b2eef..5f6042b 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1907,6 +1907,8 @@ void __init setup_per_cpu_areas(void)
if (pcpu_setup_first_chunk(ai, fc) < 0)
panic("Failed to initialize percpu areas.");
+
+ pcpu_free_alloc_info(ai);
}
#endif /* CONFIG_SMP */
--
1.9.1
From: Tejun Heo <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit f0d279654dea22b7a6ad34b9334aee80cda62cde upstream.
When pcpu_alloc_pages() fails midway, pcpu_free_pages() is invoked to
free what has already been allocated. The invocation is across the
whole requested range and pcpu_free_pages() will try to free all
non-NULL pages; unfortunately, this is incorrect as
pcpu_get_pages_and_bitmap(), unlike what its comment suggests, doesn't
clear the pages array and thus the array may have entries from the
previous invocations making the partial failure path free incorrect
pages.
Fix it by open-coding the partial freeing of the already allocated
pages.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
mm/percpu-vm.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c
index 405d331..6c055e4 100644
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -108,7 +108,7 @@ static int pcpu_alloc_pages(struct pcpu_chunk *chunk,
int page_start, int page_end)
{
const gfp_t gfp = GFP_KERNEL | __GFP_HIGHMEM | __GFP_COLD;
- unsigned int cpu;
+ unsigned int cpu, tcpu;
int i;
for_each_possible_cpu(cpu) {
@@ -116,14 +116,23 @@ static int pcpu_alloc_pages(struct pcpu_chunk *chunk,
struct page **pagep = &pages[pcpu_page_idx(cpu, i)];
*pagep = alloc_pages_node(cpu_to_node(cpu), gfp, 0);
- if (!*pagep) {
- pcpu_free_pages(chunk, pages, populated,
- page_start, page_end);
- return -ENOMEM;
- }
+ if (!*pagep)
+ goto err;
}
}
return 0;
+
+err:
+ while (--i >= page_start)
+ __free_page(pages[pcpu_page_idx(cpu, i)]);
+
+ for_each_possible_cpu(tcpu) {
+ if (tcpu == cpu)
+ break;
+ for (i = page_start; i < page_end; i++)
+ __free_page(pages[pcpu_page_idx(tcpu, i)]);
+ }
+ return -ENOMEM;
}
/**
--
1.9.1
From: Tejun Heo <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 849f5169097e1ba35b90ac9df76b5bb6f9c0aabd upstream.
If pcpu_map_pages() fails midway, it unmaps the already mapped pages.
Currently, it doesn't flush tlb after the partial unmapping. This may
be okay in most cases as the established mapping hasn't been used at
that point but it can go wrong and when it goes wrong it'd be
extremely difficult to track down.
Flush tlb after the partial unmapping.
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
mm/percpu-vm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c
index 6c055e4..6f3db37 100644
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -272,6 +272,7 @@ err:
__pcpu_unmap_pages(pcpu_chunk_addr(chunk, tcpu, page_start),
page_end - page_start);
}
+ pcpu_post_unmap_tlb_flush(chunk, page_start, page_end);
return err;
}
--
1.9.1
From: James Ralston <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 1b071a0947dbce5c184c12262e02540fbc493457 upstream.
This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH.
Signed-off-by: James Ralston <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/ata/ahci.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 0a450eb..009a097 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -305,6 +305,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x9c85), board_ahci }, /* Wildcat Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x8c82), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c84), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c86), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
--
1.9.1
From: Bjørn Mork <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 049255f51644c1105775af228396d187402a5934 upstream.
Sierra Wireless Direct IP devices using the 68A3 product ID
can be configured for modes including a CDC ECM class function.
The known example uses interface numbers 12 and 13 for the ECM
control and data interfaces respectively, consistent with CDC
MBIM function interface numbering on other Sierra devices.
It seems cleaner to restrict this driver to the ff/ff/ff
vendor specific interfaces rather than increasing the already
long interface number blacklist. This should be more future
proof if Sierra adds more class functions using interface
numbers not yet in the blacklist.
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/serial/sierra.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index bd79d68..64df565 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -296,14 +296,16 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1199, 0x68A2), /* Sierra Wireless MC77xx in QMI mode */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
- { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
+ /* Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
- { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
+ /* Airprime/Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
--
1.9.1
From: Johan Hovold <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit ee444609dbae8afee420c3243ce4c5f442efb622 upstream.
Add device id for NOVITUS Bono E thermal printer.
Reported-by: Emanuel Koczwara <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
2 files changed, 7 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 121a052..d91185a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -750,6 +750,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 0eb2e97..a5cd5f7 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -828,6 +828,12 @@
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
/*
+ * NOVITUS printers
+ */
+#define NOVITUS_VID 0x1a28
+#define NOVITUS_BONO_E_PID 0x6010
+
+/*
* RT Systems programming cables for various ham radios
*/
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
--
1.9.1
From: Bjørn Mork <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 5b3da69285c143b7ea76b3b9f73099ff1093ab73 upstream.
This VID:PID is used for some Direct IP devices behaving
identical to the already supported 0F3D:68AA devices.
Reported-by: Lars Melin <[email protected]>
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/serial/sierra.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 64df565..e3ddec0 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -300,6 +300,9 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
--
1.9.1
From: Felipe Balbi <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit fed33afce0eda44a46ae24d93aec1b5198c0bac4 upstream.
Currently, we disable pm_runtime before all register
accesses are done, this is dangerous and might lead
to abort exceptions due to the driver trying to access
a register which is clocked by a clock which was long
gated.
Fix that by moving pm_runtime_put_sync() and pm_runtime_disable()
as the last thing we do before returning from our ->remove()
method.
Fixes: 72246da (usb: Introduce DesignWare USB3 DRD Driver)
Signed-off-by: Felipe Balbi <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/dwc3/core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 99b58d84..6da4435 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -563,9 +563,6 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
dwc3_debugfs_exit(dwc);
switch (dwc->mode) {
@@ -586,6 +583,9 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
dwc3_core_exit(dwc);
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}
--
1.9.1
From: Alex Deucher <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 1952f24d0fa6292d65f886887af87ba8ac79b3ba upstream.
Vbios connector table lists non-existent VGA port.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83184
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 6d0c32b..1ce6743 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -463,6 +463,13 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
}
}
+ /* Fujitsu D3003-S2 board lists DVI-I as DVI-I and VGA */
+ if ((dev->pdev->device == 0x9805) &&
+ (dev->pdev->subsystem_vendor == 0x1734) &&
+ (dev->pdev->subsystem_device == 0x11bd)) {
+ if (*connector_type == DRM_MODE_CONNECTOR_VGA)
+ return false;
+ }
return true;
}
--
1.9.1
From: Murali Karicheri <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit c5edfff9db6f4d2c35c802acb4abe0df178becee upstream.
Keystone K2E EVM uses Marvel 0x9182 controller. This requires support
for the ID in the ahci driver.
Signed-off-by: Murali Karicheri <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Cc: Santosh Shilimkar <[email protected]>
[lizf: Backported to 3.4:
- adjust context
- s/PCI_VENDOR_ID_MARVELL_EXT/0x1b4b/]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/ata/ahci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 009a097..d366a75 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -443,6 +443,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
.driver_data = board_ahci_yes_fbs }, /* 88se9125 */
{ PCI_DEVICE(0x1b4b, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
+ { PCI_DEVICE(0x1b4b, 0x9182),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9182 */
{ PCI_DEVICE(0x1b4b, 0x9192),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ PCI_DEVICE(0x1b4b, 0x91a3),
--
1.9.1
From: Felipe Balbi <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 96908589a8b2584b1185f834d365f5cc360e8226 upstream.
Commit 71c731a (usb: host: xhci: Fix Compliance Mode
on SN65LVP3502CP Hardware) implemented a workaround
for a known issue with Texas Instruments' USB 3.0
redriver IC but it left a condition where any xHCI
host would be taken out of reset if port was placed
in compliance mode and there was no device connected
to the port.
That condition would trigger a fake connection to a
non-existent device so that usbcore would trigger a
warm reset of the port, thus taking the link out of
reset.
This has the side-effect of preventing any xHCI host
connected to a Linux machine from starting and running
the USB 3.0 Electrical Compliance Suite because the
port will mysteriously taken out of compliance mode
and, thus, xHCI won't step through the necessary
compliance patterns for link validation.
This patch fixes the issue by just adding a missing
check for XHCI_COMP_MODE_QUIRK inside
xhci_hub_report_usb3_link_state() when PORT_CAS isn't
set.
This patch should be backported to all kernels containing
commit 71c731a.
Fixes: 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware)
Cc: Alexis R. Cortes <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Acked-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[lizf: Backported to 3.4:
- s/xhci_hub_report_usb3_link_state/xhci_hub_report_link_state/]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/host/xhci-hub.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a94eabd..56ec28b 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -463,7 +463,8 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
}
/* Updates Link Status for super Speed port */
-static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+static void xhci_hub_report_link_state(struct xhci_hcd *xhci,
+ u32 *status, u32 status_reg)
{
u32 pls = status_reg & PORT_PLS_MASK;
@@ -502,7 +503,8 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
* in which sometimes the port enters compliance mode
* caused by a delay on the host-device negotiation.
*/
- if (pls == USB_SS_PORT_LS_COMP_MOD)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (pls == USB_SS_PORT_LS_COMP_MOD))
pls |= USB_PORT_STAT_CONNECTION;
}
@@ -680,7 +682,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
}
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- xhci_hub_report_link_state(&status, temp);
+ xhci_hub_report_link_state(xhci, &status, temp);
/*
* Verify if all USB3 Ports Have entered U0 already.
* Delete Compliance Mode Timer if so.
--
1.9.1
From: Dmitry Torokhov <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 5715fc764f7753d464dbe094b5ef9cffa6e479a4 upstream.
ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of
physical buttons, instead they generate primary button click when user
presses somewhat hard on the surface of the touchpad. Unfortunately they
also report primary button click whenever there are 2 or more contacts
on the pad, messing up all multi-finger gestures (2-finger scrolling,
multi-finger tapping, etc). To cope with this behavior we introduce a
delay (currently 50 msecs) in reporting primary press in case more
contacts appear.
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/input/mouse/synaptics.c | 68 +++++++++++++++++++++++++++++++----------
drivers/input/mouse/synaptics.h | 11 +++++++
2 files changed, 63 insertions(+), 16 deletions(-)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 326e194..32b1363 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -517,10 +517,61 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
((buf[0] & 0x04) >> 1) |
((buf[3] & 0x04) >> 2));
+ if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+ SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
+ hw->w == 2) {
+ synaptics_parse_agm(buf, priv, hw);
+ return 1;
+ }
+
+ hw->x = (((buf[3] & 0x10) << 8) |
+ ((buf[1] & 0x0f) << 8) |
+ buf[4]);
+ hw->y = (((buf[3] & 0x20) << 7) |
+ ((buf[1] & 0xf0) << 4) |
+ buf[5]);
+ hw->z = buf[2];
+
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
+ /*
+ * ForcePads, like Clickpads, use middle button
+ * bits to report primary button clicks.
+ * Unfortunately they report primary button not
+ * only when user presses on the pad above certain
+ * threshold, but also when there are more than one
+ * finger on the touchpad, which interferes with
+ * out multi-finger gestures.
+ */
+ if (hw->z == 0) {
+ /* No contacts */
+ priv->press = priv->report_press = false;
+ } else if (hw->w >= 4 && ((buf[0] ^ buf[3]) & 0x01)) {
+ /*
+ * Single-finger touch with pressure above
+ * the threshold. If pressure stays long
+ * enough, we'll start reporting primary
+ * button. We rely on the device continuing
+ * sending data even if finger does not
+ * move.
+ */
+ if (!priv->press) {
+ priv->press_start = jiffies;
+ priv->press = true;
+ } else if (time_after(jiffies,
+ priv->press_start +
+ msecs_to_jiffies(50))) {
+ priv->report_press = true;
+ }
+ } else {
+ priv->press = false;
+ }
+
+ hw->left = priv->report_press;
+
+ } else if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/*
* Clickpad's button is transmitted as middle button,
* however, since it is primary button, we will report
@@ -539,21 +590,6 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
}
- if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
- SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
- hw->w == 2) {
- synaptics_parse_agm(buf, priv, hw);
- return 1;
- }
-
- hw->x = (((buf[3] & 0x10) << 8) |
- ((buf[1] & 0x0f) << 8) |
- buf[4]);
- hw->y = (((buf[3] & 0x20) << 7) |
- ((buf[1] & 0xf0) << 4) |
- buf[5]);
- hw->z = buf[2];
-
if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
((buf[0] ^ buf[3]) & 0x02)) {
switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index fd26ccc..ac1b773 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -77,6 +77,11 @@
* 2 0x08 image sensor image sensor tracks 5 fingers, but only
* reports 2.
* 2 0x20 report min query 0x0f gives min coord reported
+ * 2 0x80 forcepad forcepad is a variant of clickpad that
+ * does not have physical buttons but rather
+ * uses pressure above certain threshold to
+ * report primary clicks. Forcepads also have
+ * clickpad bit set.
*/
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
@@ -85,6 +90,7 @@
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800)
+#define SYN_CAP_FORCEPAD(ex0c) ((ex0c) & 0x008000)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
@@ -174,6 +180,11 @@ struct synaptics_data {
*/
struct synaptics_hw_state agm;
bool agm_pending; /* new AGM packet received */
+
+ /* ForcePad handling */
+ unsigned long press_start;
+ bool press;
+ bool report_press;
};
void synaptics_module_init(void);
--
1.9.1
From: Sage Weil <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 73c3d4812b4c755efeca0140f606f83772a39ce4 upstream.
We preallocate a few of the message types we get back from the mon. If we
get a larger message than we are expecting, fall back to trying to allocate
a new one instead of blindly using the one we have.
Signed-off-by: Sage Weil <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
[lizf: Backported to 3.4: s/front_alloc_len/front_max/g]
Signed-off-by: Zefan Li <[email protected]>
---
net/ceph/mon_client.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 6765da3..bc293c0 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -1042,7 +1042,15 @@ static struct ceph_msg *mon_alloc_msg(struct ceph_connection *con,
if (!m) {
pr_info("alloc_msg unknown type %d\n", type);
*skip = 1;
+ } else if (front_len > m->front_max) {
+ pr_warning("mon_alloc_msg front %d > prealloc %d (%u#%llu)\n",
+ front_len, m->front_max,
+ (unsigned int)con->peer_name.type,
+ le64_to_cpu(con->peer_name.num));
+ ceph_msg_put(m);
+ m = ceph_msg_new(type, front_len, GFP_NOFS, false);
}
+
return m;
}
--
1.9.1
From: Ilya Dryomov <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit c27a3e4d667fdcad3db7b104f75659478e0c68d8 upstream.
We hard code cephx auth ticket buffer size to 256 bytes. This isn't
enough for any moderate setups and, in case tickets themselves are not
encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but
ceph_decode_copy() doesn't - it's just a memcpy() wrapper). Since the
buffer is allocated dynamically anyway, allocated it a bit later, at
the point where we know how much is going to be needed.
Fixes: http://tracker.ceph.com/issues/8979
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
net/ceph/auth_x.c | 64 +++++++++++++++++++++++++------------------------------
1 file changed, 29 insertions(+), 35 deletions(-)
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index 0eb146d..de6662b 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -13,8 +13,6 @@
#include "auth_x.h"
#include "auth_x_protocol.h"
-#define TEMP_TICKET_BUF_LEN 256
-
static void ceph_x_validate_tickets(struct ceph_auth_client *ac, int *pneed);
static int ceph_x_is_authenticated(struct ceph_auth_client *ac)
@@ -64,7 +62,7 @@ static int ceph_x_encrypt(struct ceph_crypto_key *secret,
}
static int ceph_x_decrypt(struct ceph_crypto_key *secret,
- void **p, void *end, void *obuf, size_t olen)
+ void **p, void *end, void **obuf, size_t olen)
{
struct ceph_x_encrypt_header head;
size_t head_len = sizeof(head);
@@ -75,8 +73,14 @@ static int ceph_x_decrypt(struct ceph_crypto_key *secret,
return -EINVAL;
dout("ceph_x_decrypt len %d\n", len);
- ret = ceph_decrypt2(secret, &head, &head_len, obuf, &olen,
- *p, len);
+ if (*obuf == NULL) {
+ *obuf = kmalloc(len, GFP_NOFS);
+ if (!*obuf)
+ return -ENOMEM;
+ olen = len;
+ }
+
+ ret = ceph_decrypt2(secret, &head, &head_len, *obuf, &olen, *p, len);
if (ret)
return ret;
if (head.struct_v != 1 || le64_to_cpu(head.magic) != CEPHX_ENC_MAGIC)
@@ -131,18 +135,19 @@ static void remove_ticket_handler(struct ceph_auth_client *ac,
static int process_one_ticket(struct ceph_auth_client *ac,
struct ceph_crypto_key *secret,
- void **p, void *end,
- void *dbuf, void *ticket_buf)
+ void **p, void *end)
{
struct ceph_x_info *xi = ac->private;
int type;
u8 tkt_struct_v, blob_struct_v;
struct ceph_x_ticket_handler *th;
+ void *dbuf = NULL;
void *dp, *dend;
int dlen;
char is_enc;
struct timespec validity;
struct ceph_crypto_key old_key;
+ void *ticket_buf = NULL;
void *tp, *tpend;
struct ceph_timespec new_validity;
struct ceph_crypto_key new_session_key;
@@ -167,8 +172,7 @@ static int process_one_ticket(struct ceph_auth_client *ac,
}
/* blob for me */
- dlen = ceph_x_decrypt(secret, p, end, dbuf,
- TEMP_TICKET_BUF_LEN);
+ dlen = ceph_x_decrypt(secret, p, end, &dbuf, 0);
if (dlen <= 0) {
ret = dlen;
goto out;
@@ -195,20 +199,25 @@ static int process_one_ticket(struct ceph_auth_client *ac,
/* ticket blob for service */
ceph_decode_8_safe(p, end, is_enc, bad);
- tp = ticket_buf;
if (is_enc) {
/* encrypted */
dout(" encrypted ticket\n");
- dlen = ceph_x_decrypt(&old_key, p, end, ticket_buf,
- TEMP_TICKET_BUF_LEN);
+ dlen = ceph_x_decrypt(&old_key, p, end, &ticket_buf, 0);
if (dlen < 0) {
ret = dlen;
goto out;
}
+ tp = ticket_buf;
dlen = ceph_decode_32(&tp);
} else {
/* unencrypted */
ceph_decode_32_safe(p, end, dlen, bad);
+ ticket_buf = kmalloc(dlen, GFP_NOFS);
+ if (!ticket_buf) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ tp = ticket_buf;
ceph_decode_need(p, end, dlen, bad);
ceph_decode_copy(p, ticket_buf, dlen);
}
@@ -237,6 +246,8 @@ static int process_one_ticket(struct ceph_auth_client *ac,
xi->have_keys |= th->service;
out:
+ kfree(ticket_buf);
+ kfree(dbuf);
return ret;
bad:
@@ -249,21 +260,10 @@ static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac,
void *buf, void *end)
{
void *p = buf;
- char *dbuf;
- char *ticket_buf;
u8 reply_struct_v;
u32 num;
int ret;
- dbuf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
- if (!dbuf)
- return -ENOMEM;
-
- ret = -ENOMEM;
- ticket_buf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
- if (!ticket_buf)
- goto out_dbuf;
-
ceph_decode_8_safe(&p, end, reply_struct_v, bad);
if (reply_struct_v != 1)
return -EINVAL;
@@ -272,22 +272,15 @@ static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac,
dout("%d tickets\n", num);
while (num--) {
- ret = process_one_ticket(ac, secret, &p, end,
- dbuf, ticket_buf);
+ ret = process_one_ticket(ac, secret, &p, end);
if (ret)
- goto out;
+ return ret;
}
- ret = 0;
-out:
- kfree(ticket_buf);
-out_dbuf:
- kfree(dbuf);
- return ret;
+ return 0;
bad:
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
static int ceph_x_build_authorizer(struct ceph_auth_client *ac,
@@ -603,13 +596,14 @@ static int ceph_x_verify_authorizer_reply(struct ceph_auth_client *ac,
struct ceph_x_ticket_handler *th;
int ret = 0;
struct ceph_x_authorize_reply reply;
+ void *preply = &reply;
void *p = au->reply_buf;
void *end = p + sizeof(au->reply_buf);
th = get_ticket_handler(ac, au->service);
if (IS_ERR(th))
return PTR_ERR(th);
- ret = ceph_x_decrypt(&th->session_key, &p, end, &reply, sizeof(reply));
+ ret = ceph_x_decrypt(&th->session_key, &p, end, &preply, sizeof(reply));
if (ret < 0)
return ret;
if (ret != sizeof(reply))
--
1.9.1
From: Mathias Nyman <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit c207e7c50f31113c24a9f536fcab1e8a256985d7 upstream.
If xhci initialization fails before the roothub bandwidth
domains (xhci->rh_bw[i]) are allocated it will oops when
trying to access rh_bw members in xhci_mem_cleanup().
Reported-by: Manuel Reimer <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/host/xhci-mem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 1976858..aa38b1f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1813,7 +1813,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
- for (i = 0; i < num_ports; i++) {
+ for (i = 0; i < num_ports && xhci->rh_bw; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
struct list_head *ep = &bwt->interval_bw[j].endpoints;
--
1.9.1
From: Joe Lawrence <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit c605f3cdff53a743f6d875b76956b239deca1272 upstream.
During surprise device hotplug removal tests, it was observed that
hub_events may try to call usb_lock_device on a device that has already
been freed. Protect the usb_device by taking out a reference (under the
hub_event_lock) when hub_events pulls it off the list, returning the
reference after hub_events is finished using it.
Signed-off-by: Joe Lawrence <[email protected]>
Suggested-by: David Bulkow <[email protected]> for using kref
Suggested-by: Alan Stern <[email protected]> for placement
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/core/hub.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e0d4d90..62a9e44 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3729,9 +3729,10 @@ static void hub_events(void)
hub = list_entry(tmp, struct usb_hub, event_list);
kref_get(&hub->kref);
+ hdev = hub->hdev;
+ usb_get_dev(hdev);
spin_unlock_irq(&hub_event_lock);
- hdev = hub->hdev;
hub_dev = hub->intfdev;
intf = to_usb_interface(hub_dev);
dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
@@ -3946,6 +3947,7 @@ static void hub_events(void)
usb_autopm_put_interface(intf);
loop_disconnected:
usb_unlock_device(hdev);
+ usb_put_dev(hdev);
kref_put(&hub->kref, hub_release);
} /* end while (1) */
--
1.9.1
From: Richard Larocque <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit e86fea764991e00a03ff1e56409ec9cacdbda4c9 upstream.
Returns the time remaining for an alarm timer, rather than the time at
which it is scheduled to expire. If the timer has already expired or it
is not currently scheduled, the it_value's members are set to zero.
This new behavior matches that of the other posix-timers and the POSIX
specifications.
This is a change in user-visible behavior, and may break existing
applications. Hopefully, few users rely on the old incorrect behavior.
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Sharvil Nanavati <[email protected]>
Signed-off-by: Richard Larocque <[email protected]>
[jstultz: minor style tweak]
Signed-off-by: John Stultz <[email protected]>
[lizf: Backported to 3.4:
- add alarm_expires_remaining() introduced by commit 6cffe00f7d4e]
Signed-off-by: Zefan Li <[email protected]>
---
kernel/time/alarmtimer.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index b704579..c72d3dd 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -232,6 +232,12 @@ static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer)
}
+ktime_t alarm_expires_remaining(const struct alarm *alarm)
+{
+ struct alarm_base *base = &alarm_bases[alarm->type];
+ return ktime_sub(alarm->node.expires, base->gettime());
+}
+
#ifdef CONFIG_RTC_CLASS
/**
* alarmtimer_suspend - Suspend time callback
@@ -525,18 +531,22 @@ static int alarm_timer_create(struct k_itimer *new_timer)
* @new_timer: k_itimer pointer
* @cur_setting: itimerspec data to fill
*
- * Copies the itimerspec data out from the k_itimer
+ * Copies out the current itimerspec data
*/
static void alarm_timer_get(struct k_itimer *timr,
struct itimerspec *cur_setting)
{
- memset(cur_setting, 0, sizeof(struct itimerspec));
+ ktime_t relative_expiry_time =
+ alarm_expires_remaining(&(timr->it.alarm.alarmtimer));
+
+ if (ktime_to_ns(relative_expiry_time) > 0) {
+ cur_setting->it_value = ktime_to_timespec(relative_expiry_time);
+ } else {
+ cur_setting->it_value.tv_sec = 0;
+ cur_setting->it_value.tv_nsec = 0;
+ }
- cur_setting->it_interval =
- ktime_to_timespec(timr->it.alarm.interval);
- cur_setting->it_value =
- ktime_to_timespec(timr->it.alarm.alarmtimer.node.expires);
- return;
+ cur_setting->it_interval = ktime_to_timespec(timr->it.alarm.interval);
}
/**
--
1.9.1
From: Richard Larocque <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 265b81d23a46c39df0a735a3af4238954b41a4c2 upstream.
Avoids sending a signal to alarm timers created with sigev_notify set to
SIGEV_NONE by checking for that special case in the timeout callback.
The regular posix timers avoid sending signals to SIGEV_NONE timers by
not scheduling any callbacks for them in the first place. Although it
would be possible to do something similar for alarm timers, it's simpler
to handle this as a special case in the timeout.
Prior to this patch, the alarm timer would ignore the sigev_notify value
and try to deliver signals to the process anyway. Even worse, the
sanity check for the value of sigev_signo is skipped when SIGEV_NONE was
specified, so the signal number could be bogus. If sigev_signo was an
unitialized value (as it often would be if SIGEV_NONE is used), then
it's hard to predict which signal will be sent.
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Sharvil Nanavati <[email protected]>
Signed-off-by: Richard Larocque <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
kernel/time/alarmtimer.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index c72d3dd..c870118 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -456,8 +456,10 @@ static enum alarmtimer_restart alarm_handle_timer(struct alarm *alarm,
{
struct k_itimer *ptr = container_of(alarm, struct k_itimer,
it.alarm.alarmtimer);
- if (posix_timer_event(ptr, 0) != 0)
- ptr->it_overrun++;
+ if ((ptr->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE) {
+ if (posix_timer_event(ptr, 0) != 0)
+ ptr->it_overrun++;
+ }
/* Re-add periodic timers */
if (ptr->it.alarm.interval.tv64) {
--
1.9.1
From: Aurelien Jarno <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.
Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c)
moved the string related functions into a separate file, which might
cause the following build error, depending on the configuration:
| CC arch/mips/boot/compressed/decompress.o
| In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0,
| from linux/arch/mips/boot/compressed/decompress.c:67:
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp':
| linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration]
| cc1: some warnings being treated as errors
| linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed
| make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1
| linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed
It does not fail with the standard configuration, as when
CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in
include/linux/dynamic_debug.h. There might be other ways for it to
get indirectly included.
We can't add the include directly in xz_dec_stream.c as some
architectures might want to use a different version for the boot/
directory (see for example arch/x86/boot/string.h).
Signed-off-by: Aurelien Jarno <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/7420/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
arch/mips/boot/compressed/decompress.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 5cad0fa..ca51d69 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -13,6 +13,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/string.h>
#include <asm/addrspace.h>
--
1.9.1
From: Richard Larocque <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 474e941bed9262f5fa2394f9a4a67e24499e5926 upstream.
Locks the k_itimer's it_lock member when handling the alarm timer's
expiry callback.
The regular posix timers defined in posix-timers.c have this lock held
during timout processing because their callbacks are routed through
posix_timer_fn(). The alarm timers follow a different path, so they
ought to grab the lock somewhere else.
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Sharvil Nanavati <[email protected]>
Signed-off-by: Richard Larocque <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
kernel/time/alarmtimer.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index c870118..3ce9262 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -454,8 +454,12 @@ static enum alarmtimer_type clock2alarm(clockid_t clockid)
static enum alarmtimer_restart alarm_handle_timer(struct alarm *alarm,
ktime_t now)
{
+ unsigned long flags;
struct k_itimer *ptr = container_of(alarm, struct k_itimer,
it.alarm.alarmtimer);
+ enum alarmtimer_restart result = ALARMTIMER_NORESTART;
+
+ spin_lock_irqsave(&ptr->it_lock, flags);
if ((ptr->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE) {
if (posix_timer_event(ptr, 0) != 0)
ptr->it_overrun++;
@@ -465,9 +469,11 @@ static enum alarmtimer_restart alarm_handle_timer(struct alarm *alarm,
if (ptr->it.alarm.interval.tv64) {
ptr->it_overrun += alarm_forward(alarm, now,
ptr->it.alarm.interval);
- return ALARMTIMER_RESTART;
+ result = ALARMTIMER_RESTART;
}
- return ALARMTIMER_NORESTART;
+ spin_unlock_irqrestore(&ptr->it_lock, flags);
+
+ return result;
}
/**
--
1.9.1
From: Cong Wang <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 3577af70a2ce4853d58e57d832e687d739281479 upstream.
We saw a kernel soft lockup in perf_remove_from_context(),
it looks like the `perf` process, when exiting, could not go
out of the retry loop. Meanwhile, the target process was forking
a child. So either the target process should execute the smp
function call to deactive the event (if it was running) or it should
do a context switch which deactives the event.
It seems we optimize out a context switch in perf_event_context_sched_out(),
and what's more important, we still test an obsolete task pointer when
retrying, so no one actually would deactive that event in this situation.
Fix it directly by reloading the task pointer in perf_remove_from_context().
This should cure the above soft lockup.
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Linus Torvalds <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
kernel/events/core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 685ce46..c958be1 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1702,6 +1702,16 @@ retry:
*/
if (ctx->is_active) {
raw_spin_unlock_irq(&ctx->lock);
+ /*
+ * Reload the task pointer, it might have been changed by
+ * a concurrent perf_event_context_sched_out().
+ */
+ task = ctx->task;
+ /*
+ * Reload the task pointer, it might have been changed by
+ * a concurrent perf_event_context_sched_out().
+ */
+ task = ctx->task;
goto retry;
}
--
1.9.1
From: Hans de Goede <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit cc18a69c92d0972bc2fc5a047ee3be1e8398171b upstream.
https://bugzilla.kernel.org/show_bug.cgi?id=69731
Reported-by: Jason Robinson <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 0ec9abb..dc37b32 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -601,6 +601,14 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
},
},
+ {
+ /* Fujitsu U574 laptop */
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"),
+ },
+ },
{ }
};
--
1.9.1
From: Hans de Goede <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit d2682118f4bb3ceb835f91c1a694407a31bb7378 upstream.
The sys_vendor / product_name are somewhat generic unfortunately, so this
may lead to some false positives. But nomux usually does no harm, where as
not having it clearly is causing problems on the Avatar AVIU-145A6.
https://bugzilla.kernel.org/show_bug.cgi?id=77391
Reported-by: Hugo P <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index dc37b32..1291673 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -458,6 +458,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
},
},
+ {
+ /* Avatar AVIU-145A6 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
+ },
+ },
{ }
};
--
1.9.1
From: Joern Engel <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 8ae757d09c45102b347a1bc2867f54ffc1ab8fda upstream.
In iscsi_copy_param_list() a failed iscsi_param_list memory allocation
currently invokes iscsi_release_param_list() to cleanup, and will promptly
trigger a NULL pointer dereference.
Instead, go ahead and return for the first iscsi_copy_param_list()
failure case.
Found by coverity.
Signed-off-by: Joern Engel <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/target/iscsi/iscsi_target_parameters.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 8a8ff23..ed4abad 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -552,7 +552,7 @@ int iscsi_copy_param_list(
param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL);
if (!param_list) {
pr_err("Unable to allocate memory for struct iscsi_param_list.\n");
- goto err_out;
+ return -1;
}
INIT_LIST_HEAD(¶m_list->param_list);
INIT_LIST_HEAD(¶m_list->extra_response_list);
--
1.9.1
From: Trond Myklebust <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit cd9288ffaea4359d5cfe2b8d264911506aed26a4 upstream.
James Drew reports another bug whereby the NFS client is now sending
an OPEN_DOWNGRADE in a situation where it should really have sent a
CLOSE: the client is opening the file for O_RDWR, but then trying to
do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec.
Reported-by: James Drews <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Fixes: aee7af356e15 (NFSv4: Fix problems with close in the presence...)
Signed-off-by: Trond Myklebust <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
fs/nfs/nfs4proc.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 01afcd5..527a4fc 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2063,23 +2063,23 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data)
is_rdwr = test_bit(NFS_O_RDWR_STATE, &state->flags);
is_rdonly = test_bit(NFS_O_RDONLY_STATE, &state->flags);
is_wronly = test_bit(NFS_O_WRONLY_STATE, &state->flags);
- /* Calculate the current open share mode */
- calldata->arg.fmode = 0;
- if (is_rdonly || is_rdwr)
- calldata->arg.fmode |= FMODE_READ;
- if (is_wronly || is_rdwr)
- calldata->arg.fmode |= FMODE_WRITE;
/* Calculate the change in open mode */
+ calldata->arg.fmode = 0;
if (state->n_rdwr == 0) {
- if (state->n_rdonly == 0) {
- call_close |= is_rdonly || is_rdwr;
- calldata->arg.fmode &= ~FMODE_READ;
- }
- if (state->n_wronly == 0) {
- call_close |= is_wronly || is_rdwr;
- calldata->arg.fmode &= ~FMODE_WRITE;
- }
- }
+ if (state->n_rdonly == 0)
+ call_close |= is_rdonly;
+ else if (is_rdonly)
+ calldata->arg.fmode |= FMODE_READ;
+ if (state->n_wronly == 0)
+ call_close |= is_wronly;
+ else if (is_wronly)
+ calldata->arg.fmode |= FMODE_WRITE;
+ } else if (is_rdwr)
+ calldata->arg.fmode |= FMODE_READ|FMODE_WRITE;
+
+ if (calldata->arg.fmode == 0)
+ call_close |= is_rdwr;
+
spin_unlock(&state->owner->so_lock);
if (!call_close) {
--
1.9.1
From: Mark <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 67d365a57a51fb9dece6a5ceb504aa381cae1e5b upstream.
The Adaptec USBConnect 2000 is another SCSI-USB converter which uses
Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is
required to use SCSI devices with ID other than 0.
I don't have a USBConnect 2000, but based on the other entries for Shuttle/
SCM-based converters this patch is very likely correct. I used 0x0000 and
0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which
bcdDevice value the product uses.
Signed-off-by: Mark Knibbs <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 813422e..18a9522 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -93,6 +93,12 @@ UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
"PhotoSmart R707",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
+UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999,
+ "Adaptec",
+ "USBConnect 2000",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Sebastian Kapfer <[email protected]>
* and Olaf Hering <[email protected]> (different bcd's, same vendor/product)
* for USB floppies that need the SINGLE_LUN enforcement.
--
1.9.1
From: Mark <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit b6a3ed677991558ce09046397a7c4d70530d15b3 upstream.
Hi,
The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g.
iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM
Microsystems chips. Only the connectors differ; both have the same USB ID.
The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other
than 0.
I don't have one of these, but based on the other entries for Shuttle/
SCM-based converters this patch is very likely correct. I used 0x0000 and
0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which
bcdDevice value the products use.
Signed-off-by: Mark Knibbs <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 18a9522..8642da6 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1952,6 +1952,12 @@ UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999,
+ "Ariston Technologies",
+ "iConnect USB to SCSI adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Hans de Goede <[email protected]>
* These Appotech controllers are found in Picture Frames, they provide a
* (buggy) emulation of a cdrom drive which contains the windows software
--
1.9.1
From: David Jander <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 25e924450fcb23c11c07c95ea8964dd9f174652e upstream.
This patch implements the workaround mentioned in ERR005829:
ERR005829: FlexCAN: FlexCAN does not transmit a message that is enabled to
be transmitted in a specific moment during the arbitration process.
Workaround: The workaround consists of two extra steps after setting up a
message for transmission:
Step 8: Reserve the first valid mailbox as an inactive mailbox (CODE=0b1000).
If RX FIFO is disabled, this mailbox must be message buffer 0. Otherwise, the
first valid mailbox can be found using the "RX FIFO filters" table in the
FlexCAN chapter of the chip reference manual.
Step 9: Write twice INACTIVE code (0b1000) into the first valid mailbox.
Signed-off-by: David Jander <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/net/can/flexcan.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 1331558..681fb9c 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -123,7 +123,9 @@
FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
/* FLEXCAN interrupt flag register (IFLAG) bits */
-#define FLEXCAN_TX_BUF_ID 8
+/* Errata ERR005829 step7: Reserve first valid MB */
+#define FLEXCAN_TX_BUF_RESERVED 8
+#define FLEXCAN_TX_BUF_ID 9
#define FLEXCAN_IFLAG_BUF(x) BIT(x)
#define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7)
#define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6)
@@ -317,6 +319,14 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
flexcan_write(can_id, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
flexcan_write(ctrl, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
+ /* Errata ERR005829 step8:
+ * Write twice INACTIVE(0x8) code to first MB.
+ */
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+ ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+ ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+
return NETDEV_TX_OK;
}
@@ -752,6 +762,10 @@ static int flexcan_chip_start(struct net_device *dev)
®s->cantxfg[i].can_ctrl);
}
+ /* Errata ERR005829: mark first TX mailbox as INACTIVE */
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+ ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+
/* mark TX mailbox as INACTIVE */
flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
--
1.9.1
From: David Dueck <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit e77980e50bc2850599d4d9c0192b67a9ffd6daac upstream.
In order to make the driver work with the common clock framework, this patch
converts the clk_enable()/clk_disable() to
clk_prepare_enable()/clk_disable_unprepare(). While there, add the missing
error handling.
Signed-off-by: David Dueck <[email protected]>
Signed-off-by: Anthony Harivel <[email protected]>
Acked-by: Boris Brezillon <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/net/can/at91_can.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 6ea905c..12328068 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1115,7 +1115,9 @@ static int at91_open(struct net_device *dev)
struct at91_priv *priv = netdev_priv(dev);
int err;
- clk_enable(priv->clk);
+ err = clk_prepare_enable(priv->clk);
+ if (err)
+ return err;
/* check or determine and set bittime */
err = open_candev(dev);
@@ -1139,7 +1141,7 @@ static int at91_open(struct net_device *dev)
out_close:
close_candev(dev);
out:
- clk_disable(priv->clk);
+ clk_disable_unprepare(priv->clk);
return err;
}
@@ -1156,7 +1158,7 @@ static int at91_close(struct net_device *dev)
at91_chip_stop(dev, CAN_STATE_STOPPED);
free_irq(dev->irq, dev);
- clk_disable(priv->clk);
+ clk_disable_unprepare(priv->clk);
close_candev(dev);
--
1.9.1
From: Clemens Ladisch <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit a9960e6a293e6fc3ed414643bb4e4106272e4d0a upstream.
The calculated frame size was wrong because snd_pcm_format_physical_width()
actually returns the number of bits, not bytes.
Use snd_pcm_format_size() instead, which not only returns bytes, but also
simplifies the calculation.
Fixes: 8bea869c5e56 ("ALSA: PCM midlevel: improve fifo_size handling")
Signed-off-by: Clemens Ladisch <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
sound/core/pcm_lib.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 370fc56..6292575 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1693,14 +1693,16 @@ static int snd_pcm_lib_ioctl_fifo_size(struct snd_pcm_substream *substream,
{
struct snd_pcm_hw_params *params = arg;
snd_pcm_format_t format;
- int channels, width;
+ int channels;
+ ssize_t frame_size;
params->fifo_size = substream->runtime->hw.fifo_size;
if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_FIFO_IN_FRAMES)) {
format = params_format(params);
channels = params_channels(params);
- width = snd_pcm_format_physical_width(format);
- params->fifo_size /= width * channels;
+ frame_size = snd_pcm_format_size(format, channels);
+ if (frame_size > 0)
+ params->fifo_size /= (unsigned)frame_size;
}
return 0;
}
--
1.9.1
From: Wanpeng Li <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 03bd4e1f7265548832a76e7919a81f3137c44fd1 upstream.
The following bug can be triggered by hot adding and removing a large number of
xen domain0's vcpus repeatedly:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group
PGD 5a9d5067 PUD 13067 PMD 0
Oops: 0000 [#3] SMP
[...]
Call Trace:
load_balance
? _raw_spin_unlock_irqrestore
idle_balance
__schedule
schedule
schedule_timeout
? lock_timer_base
schedule_timeout_uninterruptible
msleep
lock_device_hotplug_sysfs
online_store
dev_attr_store
sysfs_write_file
vfs_write
SyS_write
system_call_fastpath
Last level cache shared mask is built during CPU up and the
build_sched_domain() routine takes advantage of it to setup
the sched domain CPU topology.
However, llc_shared_mask is not released during CPU disable,
which leads to an invalid sched domainCPU topology.
This patch fix it by releasing the llc_shared_mask correctly
during CPU disable.
Yasuaki also reported that this can happen on real hardware:
https://lkml.org/lkml/2014/7/22/1018
His case is here:
==
Here is an example on my system.
My system has 4 sockets and each socket has 15 cores and HT is
enabled. In this case, each core of sockes is numbered as
follows:
| CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89
Socket#2 | 30-44, 90-104
Socket#3 | 45-59, 105-119
Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000.
It means that last level cache of Socket#2 is shared with
CPU#30-44 and 90-104.
When hot-removing socket#2 and #3, each core of sockets is
numbered as follows:
| CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89
But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30
remains having 0x3fff80000001fffc0000000.
After that, when hot-adding socket#2 and #3, each core of
sockets is numbered as follows:
| CPU#
Socket#0 | 0-14 , 60-74
Socket#1 | 15-29, 75-89
Socket#2 | 30-59
Socket#3 | 90-119
Then llc_shared_mask of CPU#30 becomes
0x3fff8000fffffffc0000000. It means that last level cache of
Socket#2 is shared with CPU#30-59 and 90-104. So the mask has
the wrong value.
Signed-off-by: Wanpeng Li <[email protected]>
Tested-by: Linn Crosetto <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Reviewed-by: Toshi Kani <[email protected]>
Reviewed-by: Yasuaki Ishimatsu <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
arch/x86/kernel/smpboot.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index d28c595..c7dbf02 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1248,6 +1248,9 @@ static void remove_siblinginfo(int cpu)
for_each_cpu(sibling, cpu_sibling_mask(cpu))
cpumask_clear_cpu(cpu, cpu_sibling_mask(sibling));
+ for_each_cpu(sibling, cpu_llc_shared_mask(cpu))
+ cpumask_clear_cpu(cpu, cpu_llc_shared_mask(sibling));
+ cpumask_clear(cpu_llc_shared_mask(cpu));
cpumask_clear(cpu_sibling_mask(cpu));
cpumask_clear(cpu_core_mask(cpu));
c->phys_proc_id = 0;
--
1.9.1
From: Joseph Qi <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 5760a97c7143c208fa3a8f8cad0ed7dd672ebd28 upstream.
There is a deadlock case which reported by Guozhonghua:
https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html
This case is caused by &res->spinlock and &dlm->master_lock
misordering in different threads.
It was introduced by commit 8d400b81cc83 ("ocfs2/dlm: Clean up refmap
helpers"). Since lockres is new, it doesn't not require the
&res->spinlock. So remove it.
Fixes: 8d400b81cc83 ("ocfs2/dlm: Clean up refmap helpers")
Signed-off-by: Joseph Qi <[email protected]>
Reviewed-by: joyce.xue <[email protected]>
Reported-by: Guozhonghua <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Mark Fasheh <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
fs/ocfs2/dlm/dlmmaster.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 005261c..dbc372e 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -653,12 +653,9 @@ void dlm_lockres_clear_refmap_bit(struct dlm_ctxt *dlm,
clear_bit(bit, res->refmap);
}
-
-void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
+static void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
- assert_spin_locked(&res->spinlock);
-
res->inflight_locks++;
mlog(0, "%s: res %.*s, inflight++: now %u, %ps()\n", dlm->name,
@@ -666,6 +663,13 @@ void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
__builtin_return_address(0));
}
+void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
+ struct dlm_lock_resource *res)
+{
+ assert_spin_locked(&res->spinlock);
+ __dlm_lockres_grab_inflight_ref(dlm, res);
+}
+
void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
@@ -855,10 +859,8 @@ lookup:
/* finally add the lockres to its hash bucket */
__dlm_insert_lockres(dlm, res);
- /* Grab inflight ref to pin the resource */
- spin_lock(&res->spinlock);
- dlm_lockres_grab_inflight_ref(dlm, res);
- spin_unlock(&res->spinlock);
+ /* since this lockres is new it doesn't not require the spinlock */
+ __dlm_lockres_grab_inflight_ref(dlm, res);
/* get an extra ref on the mle in case this is a BLOCK
* if so, the creator of the BLOCK may try to put the last
--
1.9.1
From: Robin Murphy <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 5ca918e5e3f9df4634077c06585c42bc6a8d699a upstream.
The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn
instructions (where the optional alignment hint is given but incorrect)
as LDR/STR, leading to register corruption. Detect these and correctly
treat them as unhandled, so that userspace gets the fault it expects.
Reported-by: Simon Hosie <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
arch/arm/mm/alignment.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index fc000e3..17f4ea2 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -39,6 +39,7 @@
* This code is not portable to processors with late data abort handling.
*/
#define CODING_BITS(i) (i & 0x0e000000)
+#define COND_BITS(i) (i & 0xf0000000)
#define LDST_I_BIT(i) (i & (1 << 26)) /* Immediate constant */
#define LDST_P_BIT(i) (i & (1 << 24)) /* Preindex */
@@ -813,6 +814,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
break;
case 0x04000000: /* ldr or str immediate */
+ if (COND_BITS(instr) == 0xf0000000) /* NEON VLDn, VSTn */
+ goto bad;
offset.un = OFFSET_BITS(instr);
handler = do_alignment_ldrstr;
break;
--
1.9.1
From: Mel Gorman <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit d3cb8bf6081b8b7a2dabb1264fe968fd870fa595 upstream.
A migration entry is marked as write if pte_write was true at the time the
entry was created. The VMA protections are not double checked when migration
entries are being removed as mprotect marks write-migration-entries as
read. It means that potentially we take a spurious fault to mark PTEs write
again but it's straight-forward. However, there is a race between write
migrations being marked read and migrations finishing. This potentially
allows a PTE to be write that should have been read. Close this race by
double checking the VMA permissions using maybe_mkwrite when migration
completes.
[[email protected]: use maybe_mkwrite]
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
mm/migrate.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/mm/migrate.c b/mm/migrate.c
index 5f588b1..98b998f 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -139,8 +139,11 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma,
get_page(new);
pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
+
+ /* Recheck VMA as permissions can change since migration started */
if (is_write_migration_entry(entry))
- pte = pte_mkwrite(pte);
+ pte = maybe_mkwrite(pte, vma);
+
#ifdef CONFIG_HUGETLB_PAGE
if (PageHuge(new))
pte = pte_mkhuge(pte);
--
1.9.1
From: Josh Triplett <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 361e9dfbaae84b0b246ed18d1ab7c82a1a41b53e upstream.
The buffers sized by CONFIG_LOG_BUF_SHIFT and
CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't
ask about their size at all.
Signed-off-by: Josh Triplett <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
[lizf: Backported to 3.4:
- drop the change to CONFIG_LOG_CPU_MAX_BUF_SHIFT as it doesn't exist in 3.4]
Signed-off-by: Zefan Li <[email protected]>
---
init/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/init/Kconfig b/init/Kconfig
index 6cfd71d..f1b0e78 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -560,6 +560,7 @@ config LOG_BUF_SHIFT
int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
range 12 21
default 17
+ depends on PRINTK
help
Select kernel log buffer size as a power of 2.
Examples:
--
1.9.1
From: Theodore Ts'o <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit a9cfcd63e8d206ce4235c355d857c4fbdf0f4587 upstream.
Thanks to Dan Carpenter for extending smatch to find bugs like this.
(This was found using a development version of smatch.)
Fixes: 36de928641ee48b2078d3fe9514242aaa2f92013
Reported-by: Dan Carpenter <[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
[lizf: Backported to 3.4:
- s/new.bh/new_bh/
- drop the change to ext4_cross_rename()]
Signed-off-by: Zefan Li <[email protected]>
---
fs/ext4/namei.c | 1 +
fs/ext4/resize.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index a2efbda..665e55c 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2452,6 +2452,7 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
new_bh = ext4_find_entry(new_dir, &new_dentry->d_name, &new_de);
if (IS_ERR(new_bh)) {
retval = PTR_ERR(new_bh);
+ new_bh = NULL;
goto end_rename;
}
if (new_bh) {
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 50992c3..a43e43c 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -528,6 +528,7 @@ handle_bb:
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
+ bh = NULL;
goto out;
}
if (ext4_bg_has_super(sb, group)) {
@@ -556,6 +557,7 @@ handle_ib:
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
+ bh = NULL;
goto out;
}
--
1.9.1
From: Theodore Ts'o <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 36de928641ee48b2078d3fe9514242aaa2f92013 upstream.
If we run into some kind of error, such as ENOMEM, while calling
ext4_getblk() or ext4_dx_find_entry(), we need to make sure this error
gets propagated up to ext4_find_entry() and then to its callers. This
way, transient errors such as ENOMEM can get propagated to the VFS.
This is important so that the system calls return the appropriate
error, and also so that in the case of ext4_lookup(), we return an
error instead of a NULL inode, since that will result in a negative
dentry cache entry that will stick around long past the OOM condition
which caused a transient ENOMEM error.
Google-Bug-Id: #17142205
Signed-off-by: Theodore Ts'o <[email protected]>
[lizf: Backported to 3.4:
- adjust context
- s/old.bh/old_bh/g
- s/new.bh/new_bh/g
- drop the changes to ext4_find_delete_entry() and ext4_cross_rename()
- add return value check for one more exr4_find_entry() in ext4_rename()]
Signed-off-by: Zefan Li <[email protected]>
---
fs/ext4/ext4.h | 2 +-
fs/ext4/namei.c | 31 ++++++++++++++++++++++++++++---
2 files changed, 29 insertions(+), 4 deletions(-)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 2922486..521ba9d 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1674,7 +1674,7 @@ ext4_group_first_block_no(struct super_block *sb, ext4_group_t group_no)
/*
* Special error return code only used by dx_probe() and its callers.
*/
-#define ERR_BAD_DX_DIR -75000
+#define ERR_BAD_DX_DIR (-(MAX_ERRNO - 1))
void ext4_get_group_no_and_offset(struct super_block *sb, ext4_fsblk_t blocknr,
ext4_group_t *blockgrpp, ext4_grpblk_t *offsetp);
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 54ad9a5..a2efbda 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -861,7 +861,7 @@ static struct buffer_head * ext4_find_entry (struct inode *dir,
buffer */
int num = 0;
ext4_lblk_t nblocks;
- int i, err;
+ int i, err = 0;
int namelen;
*res_dir = NULL;
@@ -886,7 +886,11 @@ static struct buffer_head * ext4_find_entry (struct inode *dir,
* return. Otherwise, fall back to doing a search the
* old fashioned way.
*/
- if (bh || (err != ERR_BAD_DX_DIR))
+ if (err == -ENOENT)
+ return NULL;
+ if (err && err != ERR_BAD_DX_DIR)
+ return ERR_PTR(err);
+ if (bh)
return bh;
dxtrace(printk(KERN_DEBUG "ext4_find_entry: dx failed, "
"falling back\n"));
@@ -917,6 +921,11 @@ restart:
}
num++;
bh = ext4_getblk(NULL, dir, b++, 0, &err);
+ if (unlikely(err)) {
+ if (ra_max == 0)
+ return ERR_PTR(err);
+ break;
+ }
bh_use[ra_max] = bh;
if (bh)
ll_rw_block(READ | REQ_META | REQ_PRIO,
@@ -1026,6 +1035,8 @@ static struct dentry *ext4_lookup(struct inode *dir, struct dentry *dentry, stru
return ERR_PTR(-ENAMETOOLONG);
bh = ext4_find_entry(dir, &dentry->d_name, &de);
+ if (IS_ERR(bh))
+ return (struct dentry *) bh;
inode = NULL;
if (bh) {
__u32 ino = le32_to_cpu(de->inode);
@@ -1063,6 +1074,8 @@ struct dentry *ext4_get_parent(struct dentry *child)
struct buffer_head *bh;
bh = ext4_find_entry(child->d_inode, &dotdot, &de);
+ if (IS_ERR(bh))
+ return (struct dentry *) bh;
if (!bh)
return ERR_PTR(-ENOENT);
ino = le32_to_cpu(de->inode);
@@ -2137,6 +2150,8 @@ static int ext4_rmdir(struct inode *dir, struct dentry *dentry)
retval = -ENOENT;
bh = ext4_find_entry(dir, &dentry->d_name, &de);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (!bh)
goto end_rmdir;
@@ -2202,6 +2217,8 @@ static int ext4_unlink(struct inode *dir, struct dentry *dentry)
retval = -ENOENT;
bh = ext4_find_entry(dir, &dentry->d_name, &de);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (!bh)
goto end_unlink;
@@ -2418,6 +2435,8 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
ext4_handle_sync(handle);
old_bh = ext4_find_entry(old_dir, &old_dentry->d_name, &old_de);
+ if (IS_ERR(old_bh))
+ return PTR_ERR(old_bh);
/*
* Check for inode number is _not_ due to possible IO errors.
* We might rmdir the source, keep it as pwd of some process
@@ -2431,6 +2450,10 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
new_inode = new_dentry->d_inode;
new_bh = ext4_find_entry(new_dir, &new_dentry->d_name, &new_de);
+ if (IS_ERR(new_bh)) {
+ retval = PTR_ERR(new_bh);
+ goto end_rename;
+ }
if (new_bh) {
if (!new_inode) {
brelse(new_bh);
@@ -2509,7 +2532,9 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
struct ext4_dir_entry_2 *old_de2;
old_bh2 = ext4_find_entry(old_dir, &old_dentry->d_name, &old_de2);
- if (old_bh2) {
+ if (IS_ERR(old_bh2)) {
+ retval = PTR_ERR(old_bh2);
+ } else if (old_bh2) {
retval = ext4_delete_entry(handle, old_dir,
old_de2, old_bh2);
brelse(old_bh2);
--
1.9.1
From: "Eric W. Biederman" <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit a6138db815df5ee542d848318e5dae681590fccd upstream.
Kenton Varda <[email protected]> discovered that by remounting a
read-only bind mount read-only in a user namespace the
MNT_LOCK_READONLY bit would be cleared, allowing an unprivileged user
to the remount a read-only mount read-write.
Correct this by replacing the mask of mount flags to preserve
with a mask of mount flags that may be changed, and preserve
all others. This ensures that any future bugs with this mask and
remount will fail in an easy to detect way where new mount flags
simply won't change.
Acked-by: Serge E. Hallyn <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Cc: Francis Moreau <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
fs/namespace.c | 2 +-
include/linux/mount.h | 4 +++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/namespace.c b/fs/namespace.c
index 2985879..f0f2e06 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1681,7 +1681,7 @@ static int do_remount(struct path *path, int flags, int mnt_flags,
err = do_remount_sb(sb, flags, data, 0);
if (!err) {
br_write_lock(vfsmount_lock);
- mnt_flags |= mnt->mnt.mnt_flags & MNT_PROPAGATION_MASK;
+ mnt_flags |= mnt->mnt.mnt_flags & ~MNT_USER_SETTABLE_MASK;
mnt->mnt.mnt_flags = mnt_flags;
br_write_unlock(vfsmount_lock);
}
diff --git a/include/linux/mount.h b/include/linux/mount.h
index d7029f4..2044aac 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -42,7 +42,9 @@ struct mnt_namespace;
* flag, consider how it interacts with shared mounts.
*/
#define MNT_SHARED_MASK (MNT_UNBINDABLE)
-#define MNT_PROPAGATION_MASK (MNT_SHARED | MNT_UNBINDABLE)
+#define MNT_USER_SETTABLE_MASK (MNT_NOSUID | MNT_NODEV | MNT_NOEXEC \
+ | MNT_NOATIME | MNT_NODIRATIME | MNT_RELATIME \
+ | MNT_READONLY)
#define MNT_INTERNAL 0x4000
--
1.9.1
From: Pawel Moll <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit b3f207855f57b9c8f43a547a801340bb5cbc59e5 upstream.
When running a 32-bit userspace on a 64-bit kernel (eg. i386
application on x86_64 kernel or 32-bit arm userspace on arm64
kernel) some of the perf ioctls must be treated with special
care, as they have a pointer size encoded in the command.
For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded
as 0x80042407, but 64-bit kernel will expect 0x80082407. In
result the ioctl will fail returning -ENOTTY.
This patch solves the problem by adding code fixing up the
size as compat_ioctl file operation.
Reported-by: Drew Richardson <[email protected]>
Signed-off-by: Pawel Moll <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Cc: David Ahern <[email protected]>
[lizf: Backported to 3.4 by David Ahern]
Signed-off-by: Zefan Li <[email protected]>
---
kernel/events/core.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 10c8fdd..0466297 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -36,6 +36,7 @@
#include <linux/perf_event.h>
#include <linux/ftrace_event.h>
#include <linux/hw_breakpoint.h>
+#include <linux/compat.h>
#include "internal.h"
@@ -3360,6 +3361,25 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return 0;
}
+#ifdef CONFIG_COMPAT
+static long perf_compat_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ switch (_IOC_NR(cmd)) {
+ case _IOC_NR(PERF_EVENT_IOC_SET_FILTER):
+ /* Fix up pointer size (usually 4 -> 8 in 32-on-64-bit case */
+ if (_IOC_SIZE(cmd) == sizeof(compat_uptr_t)) {
+ cmd &= ~IOCSIZE_MASK;
+ cmd |= sizeof(void *) << IOCSIZE_SHIFT;
+ }
+ break;
+ }
+ return perf_ioctl(file, cmd, arg);
+}
+#else
+# define perf_compat_ioctl NULL
+#endif
+
int perf_event_task_enable(void)
{
struct perf_event *event;
@@ -3831,7 +3851,7 @@ static const struct file_operations perf_fops = {
.read = perf_read,
.poll = perf_poll,
.unlocked_ioctl = perf_ioctl,
- .compat_ioctl = perf_ioctl,
+ .compat_ioctl = perf_compat_ioctl,
.mmap = perf_mmap,
.fasync = perf_fasync,
};
--
1.9.1
From: James Bottomley <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit d555a2abf3481f81303d835046a5ec2c4fb3ca8e upstream.
We unconditionally execute scsi_eh_get_sense() to make sure all failed
commands that should have sense attached, do. However, the routine forgets
that some commands, because of the way they fail, will not have any sense code
... we should not bother them with a REQUEST_SENSE command. Fix this by
testing to see if we actually got a CHECK_CONDITION return and skip asking for
sense if we don't.
Tested-by: Alan Stern <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/scsi/scsi_error.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index b3f0b0f..dcc39b6 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -916,6 +916,15 @@ int scsi_eh_get_sense(struct list_head *work_q,
SCSI_SENSE_VALID(scmd))
continue;
+ if (status_byte(scmd->result) != CHECK_CONDITION)
+ /*
+ * don't request sense if there's no check condition
+ * status because the error we're processing isn't one
+ * that has a sense code (and some devices get
+ * confused by sense requests out of the blue)
+ */
+ continue;
+
SCSI_LOG_ERROR_RECOVERY(2, scmd_printk(KERN_INFO, scmd,
"%s: requesting sense\n",
current->comm));
--
1.9.1
From: Marcelo Ricardo Leitner <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
Further tests revealed that after moving the garbage collector to a work
queue and protecting it with a spinlock may leave the system prone to
soft lockups if bottom half gets very busy.
It was reproced with a set of firewall rules that REJECTed packets. If
the NIC bottom half handler ends up running on the same CPU that is
running the garbage collector on a very large cache, the garbage
collector will not be able to do its job due to the amount of work
needed for handling the REJECTs and also won't reschedule.
The fix is to disable bottom half during the garbage collecting, as it
already was in the first place (most calls to it came from softirqs).
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
net/ipv4/route.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 9e7909e..6c34bc9 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -998,7 +998,7 @@ static void __do_rt_garbage_collect(int elasticity, int min_interval)
* do not make it too frequently.
*/
- spin_lock(&rt_gc_lock);
+ spin_lock_bh(&rt_gc_lock);
RT_CACHE_STAT_INC(gc_total);
@@ -1101,7 +1101,7 @@ work_done:
dst_entries_get_slow(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh)
expire = ip_rt_gc_timeout;
out:
- spin_unlock(&rt_gc_lock);
+ spin_unlock_bh(&rt_gc_lock);
}
static void __rt_garbage_collect(struct work_struct *w)
--
1.9.1
From: Hannes Frederic Sowa <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 916e4cf46d0204806c062c8c6c4d1f633852c5b6 upstream.
Currently we generate a new fragmentation id on UFO segmentation. It
is pretty hairy to identify the correct net namespace and dst there.
Especially tunnels use IFF_XMIT_DST_RELEASE and thus have no skb_dst
available at all.
This causes unreliable or very predictable ipv6 fragmentation id
generation while segmentation.
Luckily we already have pregenerated the ip6_frag_id in
ip6_ufo_append_data and can use it here.
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
[bwh: Backported to 3.2: adjust filename, indentation]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
net/ipv6/udp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 98fd738..ef9052f 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1366,7 +1366,7 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
fptr = (struct frag_hdr *)(skb_network_header(skb) + unfrag_ip6hlen);
fptr->nexthdr = nexthdr;
fptr->reserved = 0;
- ipv6_select_ident(fptr, (struct rt6_info *)skb_dst(skb));
+ fptr->identification = skb_shinfo(skb)->ip6_frag_id;
/* Fragment the skb. ipv6 header and the remaining fields of the
* fragment header are updated in ipv6_gso_segment()
--
1.9.1
From: Guillaume Nault <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit eed4d839b0cdf9d84b0a9bc63de90fd5e1e886fb upstream.
Use dst_entry held by sk_dst_get() to retrieve tunnel's PMTU.
The dst_mtu(__sk_dst_get(tunnel->sock)) call was racy. __sk_dst_get()
could return NULL if tunnel->sock->sk_dst_cache was reset just before the
call, thus making dst_mtu() dereference a NULL pointer:
[ 1937.661598] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 1937.664005] IP: [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp]
[ 1937.664005] PGD daf0c067 PUD d9f93067 PMD 0
[ 1937.664005] Oops: 0000 [#1] SMP
[ 1937.664005] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables udp_tunnel pppoe pppox ppp_generic slhc deflate ctr twofish_generic twofish_x86_64_3way xts lrw gf128mul glue_helper twofish_x86_64 twofish_common blowfish_generic blowfish_x86_64 blowfish_common des_generic cbc xcbc rmd160 sha512_generic hmac crypto_null af_key xfrm_algo 8021q garp bridge stp llc tun atmtcp clip atm ext3 mbcache jbd iTCO_wdt coretemp kvm_intel iTCO_vendor_support kvm pcspkr evdev ehci_pci lpc_ich mfd_core i5400_edac edac_core i5k_amb shpchp button processor thermal_sys xfs crc32c_generic libcrc32c dm_mod usbhid sg hid sr_mod sd_mod cdrom crc_t10dif crct10dif_common ata_generic ahci ata_piix tg3 libahci libata uhci_hcd ptp ehci_hcd pps_core usbcore scsi_mod libphy usb_common [last unloaded: l2tp_core]
[ 1937.664005] CPU: 0 PID: 10022 Comm: l2tpstress Tainted: G O 3.17.0-rc1 #1
[ 1937.664005] Hardware name: HP ProLiant DL160 G5, BIOS O12 08/22/2008
[ 1937.664005] task: ffff8800d8fda790 ti: ffff8800c43c4000 task.ti: ffff8800c43c4000
[ 1937.664005] RIP: 0010:[<ffffffffa049db88>] [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp]
[ 1937.664005] RSP: 0018:ffff8800c43c7de8 EFLAGS: 00010282
[ 1937.664005] RAX: ffff8800da8a7240 RBX: ffff8800d8c64600 RCX: 000001c325a137b5
[ 1937.664005] RDX: 8c6318c6318c6320 RSI: 000000000000010c RDI: 0000000000000000
[ 1937.664005] RBP: ffff8800c43c7ea8 R08: 0000000000000000 R09: 0000000000000000
[ 1937.664005] R10: ffffffffa048e2c0 R11: ffff8800d8c64600 R12: ffff8800ca7a5000
[ 1937.664005] R13: ffff8800c439bf40 R14: 000000000000000c R15: 0000000000000009
[ 1937.664005] FS: 00007fd7f610f700(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000
[ 1937.664005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1937.664005] CR2: 0000000000000020 CR3: 00000000d9d75000 CR4: 00000000000027e0
[ 1937.664005] Stack:
[ 1937.664005] ffffffffa049da80 ffff8800d8fda790 000000000000005b ffff880000000009
[ 1937.664005] ffff8800daf3f200 0000000000000003 ffff8800c43c7e48 ffffffff81109b57
[ 1937.664005] ffffffff81109b0e ffffffff8114c566 0000000000000000 0000000000000000
[ 1937.664005] Call Trace:
[ 1937.664005] [<ffffffffa049da80>] ? pppol2tp_connect+0x235/0x41e [l2tp_ppp]
[ 1937.664005] [<ffffffff81109b57>] ? might_fault+0x9e/0xa5
[ 1937.664005] [<ffffffff81109b0e>] ? might_fault+0x55/0xa5
[ 1937.664005] [<ffffffff8114c566>] ? rcu_read_unlock+0x1c/0x26
[ 1937.664005] [<ffffffff81309196>] SYSC_connect+0x87/0xb1
[ 1937.664005] [<ffffffff813e56f7>] ? sysret_check+0x1b/0x56
[ 1937.664005] [<ffffffff8107590d>] ? trace_hardirqs_on_caller+0x145/0x1a1
[ 1937.664005] [<ffffffff81213dee>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 1937.664005] [<ffffffff8114c262>] ? spin_lock+0x9/0xb
[ 1937.664005] [<ffffffff813092b4>] SyS_connect+0x9/0xb
[ 1937.664005] [<ffffffff813e56d2>] system_call_fastpath+0x16/0x1b
[ 1937.664005] Code: 10 2a 84 81 e8 65 76 bd e0 65 ff 0c 25 10 bb 00 00 4d 85 ed 74 37 48 8b 85 60 ff ff ff 48 8b 80 88 01 00 00 48 8b b8 10 02 00 00 <48> 8b 47 20 ff 50 20 85 c0 74 0f 83 e8 28 89 83 10 01 00 00 89
[ 1937.664005] RIP [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp]
[ 1937.664005] RSP <ffff8800c43c7de8>
[ 1937.664005] CR2: 0000000000000020
[ 1939.559375] ---[ end trace 82d44500f28f8708 ]---
Fixes: f34c4a35d879 ("l2tp: take PMTU from tunnel UDP socket")
Signed-off-by: Guillaume Nault <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Guillaume Nault <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
net/l2tp/l2tp_ppp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 82ed7df..cf7821b7 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -774,7 +774,8 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
/* If PMTU discovery was enabled, use the MTU that was discovered */
dst = sk_dst_get(tunnel->sock);
if (dst != NULL) {
- u32 pmtu = dst_mtu(__sk_dst_get(tunnel->sock));
+ u32 pmtu = dst_mtu(dst);
+
if (pmtu != 0)
session->mtu = session->mru = pmtu -
PPPOL2TP_HEADER_OVERHEAD;
--
1.9.1
From: Narendra K <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 936597631dd310e220544dc5c6075d924efd39b2 upstream.
The commit 4197aa7bb81877ebb06e4f2cc1b5fea2da23a7bd implements 64 bit
per ring statistics. But the driver resets the 'total_bytes' and
'total_packets' from RX and TX rings in the RX and TX interrupt
handlers to zero. This results in statistics being lost and user space
reporting RX and TX statistics as zero. This patch addresses the
issue by preventing the resetting of RX and TX ring statistics to
zero.
Signed-off-by: Narendra K <[email protected]>
Tested-by: Sibai Li <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Weng Meiling <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 307611a..d8e4562 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -969,8 +969,6 @@ static irqreturn_t ixgbevf_msix_clean_tx(int irq, void *data)
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
for (i = 0; i < q_vector->txr_count; i++) {
tx_ring = &(adapter->tx_ring[r_idx]);
- tx_ring->total_bytes = 0;
- tx_ring->total_packets = 0;
ixgbevf_clean_tx_irq(adapter, tx_ring);
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
r_idx + 1);
@@ -994,16 +992,6 @@ static irqreturn_t ixgbevf_msix_clean_rx(int irq, void *data)
struct ixgbe_hw *hw = &adapter->hw;
struct ixgbevf_ring *rx_ring;
int r_idx;
- int i;
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rxr_count; i++) {
- rx_ring = &(adapter->rx_ring[r_idx]);
- rx_ring->total_bytes = 0;
- rx_ring->total_packets = 0;
- r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
- r_idx + 1);
- }
if (!q_vector->rxr_count)
return IRQ_HANDLED;
--
1.9.1
From: Benjamin Poirier <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit cdb3f4a31b64c3a1c6eef40bc01ebc9594c58a8c upstream.
There are many cases where this feature does not improve performance or even
reduces it.
For example, here are the results from tests that I've run using 3.12.6 on one
Intel Xeon W3565 and one i7 920 connected by ixgbe adapters. The results are
from the Xeon, but they're similar on the i7. All numbers report the
mean±stddev over 10 runs of 10s.
1) latency tests similar to what is described in "c6e1a0d net: Allow no-cache
copy from user on transmit"
There is no statistically significant difference between tx-nocache-copy
on/off.
nic irqs spread out (one queue per cpu)
200x netperf -r 1400,1
tx-nocache-copy off
692000±1000 tps
50/90/95/99% latency (us): 275±2/643.8±0.4/799±1/2474.4±0.3
tx-nocache-copy on
693000±1000 tps
50/90/95/99% latency (us): 274±1/644.1±0.7/800±2/2474.5±0.7
200x netperf -r 14000,14000
tx-nocache-copy off
86450±80 tps
50/90/95/99% latency (us): 334.37±0.02/838±1/2100±20/3990±40
tx-nocache-copy on
86110±60 tps
50/90/95/99% latency (us): 334.28±0.01/837±2/2110±20/3990±20
2) single stream throughput tests
tx-nocache-copy leads to higher service demand
throughput cpu0 cpu1 demand
(Gb/s) (Gcycle) (Gcycle) (cycle/B)
nic irqs and netperf on cpu0 (1x netperf -T0,0 -t omni -- -d send)
tx-nocache-copy off 9402±5 9.4±0.2 0.80±0.01
tx-nocache-copy on 9403±3 9.85±0.04 0.838±0.004
nic irqs on cpu0, netperf on cpu1 (1x netperf -T1,1 -t omni -- -d send)
tx-nocache-copy off 9401±5 5.83±0.03 5.0±0.1 0.923±0.007
tx-nocache-copy on 9404±2 5.74±0.03 5.523±0.009 0.958±0.002
As a second example, here are some results from Eric Dumazet with latest
net-next.
tx-nocache-copy also leads to higher service demand
(cpu is Intel(R) Xeon(R) CPU X5660 @ 2.80GHz)
lpq83:~# ./ethtool -K eth0 tx-nocache-copy on
lpq83:~# perf stat ./netperf -H lpq84 -c
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB
87380 16384 16384 10.00 9407.44 2.50 -1.00 0.522 -1.000
Performance counter stats for './netperf -H lpq84 -c':
4282.648396 task-clock # 0.423 CPUs utilized
9,348 context-switches # 0.002 M/sec
88 CPU-migrations # 0.021 K/sec
355 page-faults # 0.083 K/sec
11,812,797,651 cycles # 2.758 GHz [82.79%]
9,020,522,817 stalled-cycles-frontend # 76.36% frontend cycles idle [82.54%]
4,579,889,681 stalled-cycles-backend # 38.77% backend cycles idle [67.33%]
6,053,172,792 instructions # 0.51 insns per cycle
# 1.49 stalled cycles per insn [83.64%]
597,275,583 branches # 139.464 M/sec [83.70%]
8,960,541 branch-misses # 1.50% of all branches [83.65%]
10.128990264 seconds time elapsed
lpq83:~# ./ethtool -K eth0 tx-nocache-copy off
lpq83:~# perf stat ./netperf -H lpq84 -c
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB
87380 16384 16384 10.00 9412.45 2.15 -1.00 0.449 -1.000
Performance counter stats for './netperf -H lpq84 -c':
2847.375441 task-clock # 0.281 CPUs utilized
11,632 context-switches # 0.004 M/sec
49 CPU-migrations # 0.017 K/sec
354 page-faults # 0.124 K/sec
7,646,889,749 cycles # 2.686 GHz [83.34%]
6,115,050,032 stalled-cycles-frontend # 79.97% frontend cycles idle [83.31%]
1,726,460,071 stalled-cycles-backend # 22.58% backend cycles idle [66.55%]
2,079,702,453 instructions # 0.27 insns per cycle
# 2.94 stalled cycles per insn [83.22%]
363,773,213 branches # 127.757 M/sec [83.29%]
4,242,732 branch-misses # 1.17% of all branches [83.51%]
10.128449949 seconds time elapsed
CC: Tom Herbert <[email protected]>
Signed-off-by: Benjamin Poirier <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
net/core/dev.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index b47375d..0770364 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5546,13 +5546,8 @@ int register_netdevice(struct net_device *dev)
dev->features |= NETIF_F_SOFT_FEATURES;
dev->wanted_features = dev->features & dev->hw_features;
- /* Turn on no cache copy if HW is doing checksum */
if (!(dev->flags & IFF_LOOPBACK)) {
dev->hw_features |= NETIF_F_NOCACHE_COPY;
- if (dev->features & NETIF_F_ALL_CSUM) {
- dev->wanted_features |= NETIF_F_NOCACHE_COPY;
- dev->features |= NETIF_F_NOCACHE_COPY;
- }
}
/* Make NETIF_F_HIGHDMA inheritable to VLAN devices.
--
1.9.1
From: Ben Hutchings <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
Dmitry Semyonov reported that after upgrading from 3.2.54 to
3.2.57 the rtl8192ce driver will crash when its interface is brought
up. The oops message shows:
[ 1833.611397] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[ 1833.611455] IP: [<ffffffffa0410c6a>] rtl92ce_update_hal_rate_tbl+0x29/0x4db [rtl8192ce]
...
[ 1833.613326] Call Trace:
[ 1833.613346] [<ffffffffa02ad9c6>] ? rtl92c_dm_watchdog+0xd0b/0xec9 [rtl8192c_common]
[ 1833.613391] [<ffffffff8105b5cf>] ? process_one_work+0x161/0x269
[ 1833.613425] [<ffffffff8105c598>] ? worker_thread+0xc2/0x145
[ 1833.613458] [<ffffffff8105c4d6>] ? manage_workers.isra.25+0x15b/0x15b
[ 1833.613496] [<ffffffff8105f6d9>] ? kthread+0x76/0x7e
[ 1833.613527] [<ffffffff81356b74>] ? kernel_thread_helper+0x4/0x10
[ 1833.613563] [<ffffffff8105f663>] ? kthread_worker_fn+0x139/0x139
[ 1833.613598] [<ffffffff81356b70>] ? gs_change+0x13/0x13
Disassembly of rtl92ce_update_hal_rate_tbl() shows that the 'sta'
parameter was null. None of the changes to the rtlwifi family between
3.2.54 and 3.2.57 seem to directly cause this, and reverting commit
f78bccd79ba3 ('rtlwifi: rtl8192ce: Fix too long disable of IRQs')
doesn't fix it.
rtl92c_dm_watchdog() calls rtl92ce_update_hal_rate_tbl() via
rtl92c_dm_refresh_rate_adaptive_mask(), which does not appear in the
call trace as it was inlined. That function has been completely
removed upstream which may explain why this crash wasn't seen there.
I'm not sure that it is sensible to completely remove
rtl92c_dm_refresh_rate_adaptive_mask() without making other
compensating changes elsewhere, so try to work around this for 3.2 by
checking for a null pointer in rtl92c_dm_refresh_rate_adaptive_mask()
and then skipping the call to rtl92ce_update_hal_rate_tbl().
References: https://bugs.debian.org/745137
References: https://bugs.debian.org/745462
Reported-by: Dmitry Semyonov <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Cc: Larry Finger <[email protected]>
Cc: Chaoming Li <[email protected]>
Cc: Satoshi IWAMOTO <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
index 1208b75..513baa0 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
@@ -1210,11 +1210,14 @@ static void rtl92c_dm_refresh_rate_adaptive_mask(struct ieee80211_hw *hw)
if (rtlhal->interface == INTF_PCI) {
rcu_read_lock();
sta = ieee80211_find_sta(mac->vif, mac->bssid);
+ if (!sta)
+ goto out_unlock;
}
rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
p_ra->ratr_state);
p_ra->pre_ratr_state = p_ra->ratr_state;
+ out_unlock:
if (rtlhal->interface == INTF_PCI)
rcu_read_unlock();
}
--
1.9.1
From: Marcelo Ricardo Leitner <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
Currently the route garbage collector gets called by dst_alloc() if it
have more entries than the threshold. But it's an expensive call, that
don't really need to be done by then.
Another issue with current way is that it allows running the garbage
collector with the same start parameters on multiple CPUs at once, which
is not optimal. A system may even soft lockup if the cache is big enough
as the garbage collectors will be fighting over the hash lock entries.
This patch thus moves the garbage collector to run asynchronously on a
work queue, much similar to how rt_expire_check runs.
There is one condition left that allows multiple executions, which is
handled by the next patch.
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
net/ipv4/route.c | 43 +++++++++++++++++++++++++++++--------------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index fd68433..90de2f9 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -150,6 +150,9 @@ static void ipv4_link_failure(struct sk_buff *skb);
static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu);
static int rt_garbage_collect(struct dst_ops *ops);
+static void __rt_garbage_collect(struct work_struct *w);
+static DECLARE_WORK(rt_gc_worker, __rt_garbage_collect);
+
static void ipv4_dst_ifdown(struct dst_entry *dst, struct net_device *dev,
int how)
{
@@ -977,7 +980,7 @@ static void rt_emergency_hash_rebuild(struct net *net)
and when load increases it reduces to limit cache size.
*/
-static int rt_garbage_collect(struct dst_ops *ops)
+static void __do_rt_garbage_collect(int elasticity, int min_interval)
{
static unsigned long expire = RT_GC_TIMEOUT;
static unsigned long last_gc;
@@ -996,7 +999,7 @@ static int rt_garbage_collect(struct dst_ops *ops)
RT_CACHE_STAT_INC(gc_total);
- if (now - last_gc < ip_rt_gc_min_interval &&
+ if (now - last_gc < min_interval &&
entries < ip_rt_max_size) {
RT_CACHE_STAT_INC(gc_ignored);
goto out;
@@ -1004,7 +1007,7 @@ static int rt_garbage_collect(struct dst_ops *ops)
entries = dst_entries_get_slow(&ipv4_dst_ops);
/* Calculate number of entries, which we want to expire now. */
- goal = entries - (ip_rt_gc_elasticity << rt_hash_log);
+ goal = entries - (elasticity << rt_hash_log);
if (goal <= 0) {
if (equilibrium < ipv4_dst_ops.gc_thresh)
equilibrium = ipv4_dst_ops.gc_thresh;
@@ -1021,7 +1024,7 @@ static int rt_garbage_collect(struct dst_ops *ops)
equilibrium = entries - goal;
}
- if (now - last_gc >= ip_rt_gc_min_interval)
+ if (now - last_gc >= min_interval)
last_gc = now;
if (goal <= 0) {
@@ -1086,15 +1089,33 @@ static int rt_garbage_collect(struct dst_ops *ops)
if (net_ratelimit())
pr_warn("dst cache overflow\n");
RT_CACHE_STAT_INC(gc_dst_overflow);
- return 1;
+ return;
work_done:
- expire += ip_rt_gc_min_interval;
+ expire += min_interval;
if (expire > ip_rt_gc_timeout ||
dst_entries_get_fast(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh ||
dst_entries_get_slow(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh)
expire = ip_rt_gc_timeout;
-out: return 0;
+out: return;
+}
+
+static void __rt_garbage_collect(struct work_struct *w)
+{
+ __do_rt_garbage_collect(ip_rt_gc_elasticity, ip_rt_gc_min_interval);
+}
+
+static int rt_garbage_collect(struct dst_ops *ops)
+{
+ if (!work_pending(&rt_gc_worker))
+ schedule_work(&rt_gc_worker);
+
+ if (dst_entries_get_fast(&ipv4_dst_ops) >= ip_rt_max_size ||
+ dst_entries_get_slow(&ipv4_dst_ops) >= ip_rt_max_size) {
+ RT_CACHE_STAT_INC(gc_dst_overflow);
+ return 1;
+ }
+ return 0;
}
/*
@@ -1288,13 +1309,7 @@ restart:
it is most likely it holds some neighbour records.
*/
if (attempts-- > 0) {
- int saved_elasticity = ip_rt_gc_elasticity;
- int saved_int = ip_rt_gc_min_interval;
- ip_rt_gc_elasticity = 1;
- ip_rt_gc_min_interval = 0;
- rt_garbage_collect(&ipv4_dst_ops);
- ip_rt_gc_min_interval = saved_int;
- ip_rt_gc_elasticity = saved_elasticity;
+ __do_rt_garbage_collect(1, 0);
goto restart;
}
--
1.9.1
From: Marcelo Ricardo Leitner <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
When rt_intern_hash() has to deal with neighbour cache overflowing,
it triggers the route cache garbage collector in an attempt to free
some references on neighbour entries.
Such call cannot be done async but should also not run in parallel with
an already-running one, so that they don't collapse fighting over the
hash lock entries.
This patch thus blocks parallel executions with spinlocks:
- A call from worker and from rt_intern_hash() are not the same, and
cannot be merged, thus they will wait each other on rt_gc_lock.
- Calls to gc from rt_intern_hash() may happen in parallel but we must
wait for it to finish in order to try again. This dedup and
synchrinozation is then performed by the locking just before calling
__do_rt_garbage_collect().
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
net/ipv4/route.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 90de2f9..9e7909e 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -986,6 +986,7 @@ static void __do_rt_garbage_collect(int elasticity, int min_interval)
static unsigned long last_gc;
static int rover;
static int equilibrium;
+ static DEFINE_SPINLOCK(rt_gc_lock);
struct rtable *rth;
struct rtable __rcu **rthp;
unsigned long now = jiffies;
@@ -997,6 +998,8 @@ static void __do_rt_garbage_collect(int elasticity, int min_interval)
* do not make it too frequently.
*/
+ spin_lock(&rt_gc_lock);
+
RT_CACHE_STAT_INC(gc_total);
if (now - last_gc < min_interval &&
@@ -1089,7 +1092,7 @@ static void __do_rt_garbage_collect(int elasticity, int min_interval)
if (net_ratelimit())
pr_warn("dst cache overflow\n");
RT_CACHE_STAT_INC(gc_dst_overflow);
- return;
+ goto out;
work_done:
expire += min_interval;
@@ -1097,7 +1100,8 @@ work_done:
dst_entries_get_fast(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh ||
dst_entries_get_slow(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh)
expire = ip_rt_gc_timeout;
-out: return;
+out:
+ spin_unlock(&rt_gc_lock);
}
static void __rt_garbage_collect(struct work_struct *w)
@@ -1172,7 +1176,7 @@ static struct rtable *rt_intern_hash(unsigned hash, struct rtable *rt,
unsigned long now;
u32 min_score;
int chain_length;
- int attempts = !in_softirq();
+ int attempts = 1;
restart:
chain_length = 0;
@@ -1308,8 +1312,15 @@ restart:
can be released. Try to shrink route cache,
it is most likely it holds some neighbour records.
*/
- if (attempts-- > 0) {
- __do_rt_garbage_collect(1, 0);
+ if (!in_softirq() && attempts-- > 0) {
+ static DEFINE_SPINLOCK(lock);
+
+ if (spin_trylock(&lock)) {
+ __do_rt_garbage_collect(1, 0);
+ spin_unlock(&lock);
+ } else {
+ spin_unlock_wait(&lock);
+ }
goto restart;
}
--
1.9.1
From: Mikulas Patocka <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit d49ec52ff6ddcda178fc2476a109cf1bd1fa19ed upstream.
The DM crypt target accesses memory beyond allocated space resulting in
a crash on 32 bit x86 systems.
This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm
crypt: use async crypto"). However, this bug was masked by the fact
that kmalloc rounds the size up to the next power of two. This bug
wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio
data"). By switching to using per-bio data there was no longer any
padding beyond the end of a dm-crypt allocated memory block.
To minimize allocation overhead dm-crypt puts several structures into one
block allocated with kmalloc. The block holds struct ablkcipher_request,
cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))),
struct dm_crypt_request and an initialization vector.
The variable dmreq_start is set to offset of struct dm_crypt_request
within this memory block. dm-crypt allocates the block with this size:
cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size.
When accessing the initialization vector, dm-crypt uses the function
iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq
+ 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1).
dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request
structure. However, when dm-crypt accesses the initialization vector, it
takes a pointer to the end of dm_crypt_request, aligns it, and then uses
it as the initialization vector. If the end of dm_crypt_request is not
aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the
alignment causes the initialization vector to point beyond the allocated
space.
Fix this bug by calculating the variable iv_size_padding and adding it
to the allocated size.
Also correct the alignment of dm_crypt_request. struct dm_crypt_request
is specific to dm-crypt (it isn't used by the crypto subsystem at all),
so it is aligned on __alignof__(struct dm_crypt_request).
Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is
aligned as if the block was allocated with kmalloc.
Reported-by: Krzysztof Kolasa <[email protected]>
Tested-by: Milan Broz <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
[lizf: Backported by Mikulas]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/md/dm-crypt.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 535c3e2..926989d 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1566,6 +1566,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
unsigned int key_size, opt_params;
unsigned long long tmpll;
int ret;
+ size_t iv_size_padding;
struct dm_arg_set as;
const char *opt_string;
char dummy;
@@ -1602,12 +1603,23 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
cc->dmreq_start = sizeof(struct ablkcipher_request);
cc->dmreq_start += crypto_ablkcipher_reqsize(any_tfm(cc));
- cc->dmreq_start = ALIGN(cc->dmreq_start, crypto_tfm_ctx_alignment());
- cc->dmreq_start += crypto_ablkcipher_alignmask(any_tfm(cc)) &
- ~(crypto_tfm_ctx_alignment() - 1);
+ cc->dmreq_start = ALIGN(cc->dmreq_start, __alignof__(struct dm_crypt_request));
+
+ if (crypto_ablkcipher_alignmask(any_tfm(cc)) < CRYPTO_MINALIGN) {
+ /* Allocate the padding exactly */
+ iv_size_padding = -(cc->dmreq_start + sizeof(struct dm_crypt_request))
+ & crypto_ablkcipher_alignmask(any_tfm(cc));
+ } else {
+ /*
+ * If the cipher requires greater alignment than kmalloc
+ * alignment, we don't know the exact position of the
+ * initialization vector. We must assume worst case.
+ */
+ iv_size_padding = crypto_ablkcipher_alignmask(any_tfm(cc));
+ }
cc->req_pool = mempool_create_kmalloc_pool(MIN_IOS, cc->dmreq_start +
- sizeof(struct dm_crypt_request) + cc->iv_size);
+ sizeof(struct dm_crypt_request) + iv_size_padding + cc->iv_size);
if (!cc->req_pool) {
ti->error = "Cannot allocate crypt request mempool";
goto bad;
--
1.9.1
From: Felipe Balbi <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit da64c27d3c93ee9f89956b9de86c4127eb244494 upstream.
LDISCs shouldn't call tty->ops->write() from within
->write_wakeup().
->write_wakeup() is called with port lock taken and
IRQs disabled, tty->ops->write() will try to acquire
the same port lock and we will deadlock.
Acked-by: Marcel Holtmann <[email protected]>
Reviewed-by: Peter Hurley <[email protected]>
Reported-by: Huang Shijie <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Tested-by: Andreas Bießmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[[email protected]: rebased on 3.4.103]
Signed-off-by: Tim Niemeyer <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/bluetooth/hci_ldisc.c | 25 ++++++++++++++++++++-----
drivers/bluetooth/hci_uart.h | 2 ++
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 98a8c05..d4550f9 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -118,10 +118,6 @@ static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
int hci_uart_tx_wakeup(struct hci_uart *hu)
{
- struct tty_struct *tty = hu->tty;
- struct hci_dev *hdev = hu->hdev;
- struct sk_buff *skb;
-
if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
return 0;
@@ -129,6 +125,22 @@ int hci_uart_tx_wakeup(struct hci_uart *hu)
BT_DBG("");
+ schedule_work(&hu->write_work);
+
+ return 0;
+}
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+ struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+ struct tty_struct *tty = hu->tty;
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+
+ /* REVISIT: should we cope with bad skbs or ->write() returning
+ * and error value ?
+ */
+
restart:
clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
@@ -153,7 +165,6 @@ restart:
goto restart;
clear_bit(HCI_UART_SENDING, &hu->tx_state);
- return 0;
}
/* ------- Interface to HCI layer ------ */
@@ -264,6 +275,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
hu->tty = tty;
tty->receive_room = 65536;
+ INIT_WORK(&hu->write_work, hci_uart_write_work);
+
spin_lock_init(&hu->rx_lock);
/* Flush any pending characters in the driver and line discipline. */
@@ -298,6 +311,8 @@ static void hci_uart_tty_close(struct tty_struct *tty)
if (hdev)
hci_uart_close(hdev);
+ cancel_work_sync(&hu->write_work);
+
if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
if (hdev) {
hci_unregister_dev(hdev);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 6cf6ab22..af93d83 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -66,6 +66,8 @@ struct hci_uart {
unsigned long flags;
unsigned long hdev_flags;
+ struct work_struct write_work;
+
struct hci_uart_proto *proto;
void *priv;
--
1.9.1
From: Sergio Gelato <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
BugLink: http://bugs.launchpad.net/bugs/1348670
Fix regression introduced in pre-3.14 kernels by cherry-picking
aa07c713ecfc0522916f3cd57ac628ea6127c0ec
(NFSD: Call ->set_acl with a NULL ACL structure if no entries).
The affected code was removed in 3.14 by commit
4ac7249ea5a0ceef9f8269f63f33cc873c3fac61
(nfsd: use get_acl and ->set_acl).
The ->set_acl methods are already able to cope with a NULL argument.
Signed-off-by: Sergio Gelato <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
fs/nfsd/vfs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index e3abfde..36620e6 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -508,6 +508,9 @@ set_nfsv4_acl_one(struct dentry *dentry, struct posix_acl *pacl, char *key)
char *buf = NULL;
int error = 0;
+ if (!pacl)
+ return vfs_setxattr(dentry, key, NULL, 0, 0);
+
buflen = posix_acl_xattr_size(pacl->a_count);
buf = kmalloc(buflen, GFP_KERNEL);
error = -ENOMEM;
--
1.9.1
From: Johannes Berg <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit bd8c78e78d5011d8111bc2533ee73b13a3bd6c42 upstream.
In testmode and vendor command reply/event SKBs we use the
skb cb data to store nl80211 parameters between allocation
and sending. This causes the code for CONFIG_NETLINK_MMAP
to get confused, because it takes ownership of the skb cb
data when the SKB is handed off to netlink, and it doesn't
explicitly clear it.
Clear the skb cb explicitly when we're done and before it
gets passed to netlink to avoid this issue.
Reported-by: Assaf Azulay <[email protected]>
Reported-by: David Spinadel <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
net/wireless/nl80211.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index add9f94..52646f9 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -5059,6 +5059,9 @@ int cfg80211_testmode_reply(struct sk_buff *skb)
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
+ /* clear CB data for netlink core to own from now on */
+ memset(skb->cb, 0, sizeof(skb->cb));
+
if (WARN_ON(!rdev->testmode_info)) {
kfree_skb(skb);
return -EINVAL;
@@ -5085,6 +5088,9 @@ void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
+ /* clear CB data for netlink core to own from now on */
+ memset(skb->cb, 0, sizeof(skb->cb));
+
nla_nest_end(skb, data);
genlmsg_end(skb, hdr);
genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), skb, 0,
--
1.9.1
From: Jens Axboe <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 46f341ffcfb5d8530f7d1e60f3be06cce6661b62 upstream.
Commit 2da78092 changed the locking from a mutex to a spinlock,
so we now longer sleep in this context. But there was a leftover
might_sleep() in there, which now triggers since we do the final
free from an RCU callback. Get rid of it.
Reported-by: Pontus Fuchs <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
block/genhd.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/block/genhd.c b/block/genhd.c
index 54867f4..60f7e6c 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -447,8 +447,6 @@ int blk_alloc_devt(struct hd_struct *part, dev_t *devt)
*/
void blk_free_devt(dev_t devt)
{
- might_sleep();
-
if (devt == MKDEV(0, 0))
return;
--
1.9.1
From: Peter Zijlstra <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 6c72e3501d0d62fc064d3680e5234f3463ec5a86 upstream.
Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by
calling perf_event_free_task() when failing sched_fork() we will not yet
have done the memset() on ->perf_event_ctxp[] and will therefore try and
'free' the inherited contexts, which are still in use by the parent
process. This is bad..
Suggested-by: Oleg Nesterov <[email protected]>
Reported-by: Oleg Nesterov <[email protected]>
Reported-by: Sylvain 'ythier' Hitier <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
kernel/events/core.c | 4 +++-
kernel/fork.c | 5 +++--
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index c958be1..10c8fdd 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -7127,8 +7127,10 @@ int perf_event_init_task(struct task_struct *child)
for_each_task_context_nr(ctxn) {
ret = perf_event_init_context(child, ctxn);
- if (ret)
+ if (ret) {
+ perf_event_free_task(child);
return ret;
+ }
}
return 0;
diff --git a/kernel/fork.c b/kernel/fork.c
index 621c547..878dcb2 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1285,7 +1285,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
goto bad_fork_cleanup_policy;
retval = audit_alloc(p);
if (retval)
- goto bad_fork_cleanup_policy;
+ goto bad_fork_cleanup_perf;
/* copy all the process information */
retval = copy_semundo(clone_flags, p);
if (retval)
@@ -1480,8 +1480,9 @@ bad_fork_cleanup_semundo:
exit_sem(p);
bad_fork_cleanup_audit:
audit_free(p);
-bad_fork_cleanup_policy:
+bad_fork_cleanup_perf:
perf_event_free_task(p);
+bad_fork_cleanup_policy:
#ifdef CONFIG_NUMA
mpol_put(p->mempolicy);
bad_fork_cleanup_cgroup:
--
1.9.1
From: Xiubo Li <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 6596aa047b624aeec2ea321962cfdecf9953a383 upstream.
Since we cannot make sure the 'params->num_regs' will always be none
zero here, and then if it equals to zero, the kmemdup() will return
ZERO_SIZE_PTR, which equals to ((void *)16).
So this patch fix this with just doing the zero check before calling
kmemdup().
Signed-off-by: Xiubo Li <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
sound/soc/soc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index c88d974..34c1fbb 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2799,7 +2799,7 @@ int snd_soc_bytes_put(struct snd_kcontrol *kcontrol,
unsigned int val;
void *data;
- if (!codec->using_regmap)
+ if (!codec->using_regmap || !params->num_regs)
return -EINVAL;
data = ucontrol->value.bytes.data;
--
1.9.1
From: Miklos Szeredi <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit b928095b0a7cff7fb9fcf4c706348ceb8ab2c295 upstream.
If overwriting an empty directory with rename, then need to drop the extra
nlink.
Test prog:
#include <stdio.h>
#include <fcntl.h>
#include <err.h>
#include <sys/stat.h>
int main(void)
{
const char *test_dir1 = "test-dir1";
const char *test_dir2 = "test-dir2";
int res;
int fd;
struct stat statbuf;
res = mkdir(test_dir1, 0777);
if (res == -1)
err(1, "mkdir(\"%s\")", test_dir1);
res = mkdir(test_dir2, 0777);
if (res == -1)
err(1, "mkdir(\"%s\")", test_dir2);
fd = open(test_dir2, O_RDONLY);
if (fd == -1)
err(1, "open(\"%s\")", test_dir2);
res = rename(test_dir1, test_dir2);
if (res == -1)
err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2);
res = fstat(fd, &statbuf);
if (res == -1)
err(1, "fstat(%i)", fd);
if (statbuf.st_nlink != 0) {
fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink);
return 1;
}
return 0;
}
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
mm/shmem.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/mm/shmem.c b/mm/shmem.c
index 4bb5a80..0b77082 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1725,8 +1725,10 @@ static int shmem_rename(struct inode *old_dir, struct dentry *old_dentry, struct
if (new_dentry->d_inode) {
(void) shmem_unlink(new_dir, new_dentry);
- if (they_are_dirs)
+ if (they_are_dirs) {
+ drop_nlink(new_dentry->d_inode);
drop_nlink(old_dir);
+ }
} else if (they_are_dirs) {
drop_nlink(old_dir);
inc_nlink(new_dir);
--
1.9.1
From: Andreas Rohner <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 56d7acc792c0d98f38f22058671ee715ff197023 upstream.
This bug leads to reproducible silent data loss, despite the use of
msync(), sync() and a clean unmount of the file system. It is easily
reproducible with the following script:
----------------[BEGIN SCRIPT]--------------------
mkfs.nilfs2 -f /dev/sdb
mount /dev/sdb /mnt
dd if=/dev/zero bs=1M count=30 of=/mnt/testfile
umount /mnt
mount /dev/sdb /mnt
CHECKSUM_BEFORE="$(md5sum /mnt/testfile)"
/root/mmaptest/mmaptest /mnt/testfile 30 10 5
sync
CHECKSUM_AFTER="$(md5sum /mnt/testfile)"
umount /mnt
mount /dev/sdb /mnt
CHECKSUM_AFTER_REMOUNT="$(md5sum /mnt/testfile)"
umount /mnt
echo "BEFORE MMAP:\t$CHECKSUM_BEFORE"
echo "AFTER MMAP:\t$CHECKSUM_AFTER"
echo "AFTER REMOUNT:\t$CHECKSUM_AFTER_REMOUNT"
----------------[END SCRIPT]--------------------
The mmaptest tool looks something like this (very simplified, with
error checking removed):
----------------[BEGIN mmaptest]--------------------
data = mmap(NULL, file_size - file_offset, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, file_offset);
for (i = 0; i < write_count; ++i) {
memcpy(data + i * 4096, buf, sizeof(buf));
msync(data, file_size - file_offset, MS_SYNC))
}
----------------[END mmaptest]--------------------
The output of the script looks something like this:
BEFORE MMAP: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile
AFTER MMAP: 6604a1c31f10780331a6850371b3a313 /mnt/testfile
AFTER REMOUNT: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile
So it is clear, that the changes done using mmap() do not survive a
remount. This can be reproduced a 100% of the time. The problem was
introduced in commit 136e8770cd5d ("nilfs2: fix issue of
nilfs_set_page_dirty() for page at EOF boundary").
If the page was read with mpage_readpage() or mpage_readpages() for
example, then it has no buffers attached to it. In that case
page_has_buffers(page) in nilfs_set_page_dirty() will be false.
Therefore nilfs_set_file_dirty() is never called and the pages are never
collected and never written to disk.
This patch fixes the problem by also calling nilfs_set_file_dirty() if the
page has no buffers attached to it.
[[email protected]: s/PAGE_SHIFT/PAGE_CACHE_SHIFT/]
Signed-off-by: Andreas Rohner <[email protected]>
Tested-by: Andreas Rohner <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
fs/nilfs2/inode.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index aa526be..204bfcf 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -24,6 +24,7 @@
#include <linux/buffer_head.h>
#include <linux/gfp.h>
#include <linux/mpage.h>
+#include <linux/pagemap.h>
#include <linux/writeback.h>
#include <linux/uio.h>
#include "nilfs.h"
@@ -195,10 +196,10 @@ static int nilfs_writepage(struct page *page, struct writeback_control *wbc)
static int nilfs_set_page_dirty(struct page *page)
{
+ struct inode *inode = page->mapping->host;
int ret = __set_page_dirty_nobuffers(page);
if (page_has_buffers(page)) {
- struct inode *inode = page->mapping->host;
unsigned nr_dirty = 0;
struct buffer_head *bh, *head;
@@ -221,6 +222,10 @@ static int nilfs_set_page_dirty(struct page *page)
if (nr_dirty)
nilfs_set_file_dirty(inode, nr_dirty);
+ } else if (ret) {
+ unsigned nr_dirty = 1 << (PAGE_CACHE_SHIFT - inode->i_blkbits);
+
+ nilfs_set_file_dirty(inode, nr_dirty);
}
return ret;
}
--
1.9.1
From: Markos Chandras <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 8a574cfa2652545eb95595d38ac2a0bb501af0ae upstream.
Every mcount() call in the MIPS 32-bit kernel is done as follows:
[...]
move at, ra
jal _mcount
addiu sp, sp, -8
[...]
but upon returning from the mcount() function, the stack pointer
is not adjusted properly. This is explained in details in 58b69401c797
(MIPS: Function tracer: Fix broken function tracing).
Commit ad8c396936e3 ("MIPS: Unbreak function tracer for 64-bit kernel.)
fixed the stack manipulation for 64-bit but it didn't fix it completely
for MIPS32.
Signed-off-by: Markos Chandras <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/7792/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
arch/mips/kernel/mcount.S | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index 4c968e7..55eca41 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -119,7 +119,11 @@ NESTED(_mcount, PT_SIZE, ra)
nop
#endif
b ftrace_stub
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#else
nop
+#endif
static_trace:
MCOUNT_SAVE_REGS
@@ -129,6 +133,9 @@ static_trace:
move a1, AT /* arg2: parent's return address */
MCOUNT_RESTORE_REGS
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#endif
.globl ftrace_stub
ftrace_stub:
RETURN_BACK
@@ -177,6 +184,11 @@ NESTED(ftrace_graph_caller, PT_SIZE, ra)
jal prepare_ftrace_return
nop
MCOUNT_RESTORE_REGS
+#ifndef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#endif
+#endif
RETURN_BACK
END(ftrace_graph_caller)
--
1.9.1
From: Zefan Li <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 2ad654bc5e2b211e92f66da1d819e47d79a866f0 upstream.
When we change cpuset.memory_spread_{page,slab}, cpuset will flip
PF_SPREAD_{PAGE,SLAB} bit of tsk->flags for each task in that cpuset.
This should be done using atomic bitops, but currently we don't,
which is broken.
Tetsuo reported a hard-to-reproduce kernel crash on RHEL6, which happened
when one thread tried to clear PF_USED_MATH while at the same time another
thread tried to flip PF_SPREAD_PAGE/PF_SPREAD_SLAB. They both operate on
the same task.
Here's the full report:
https://lkml.org/lkml/2014/9/19/230
To fix this, we make PF_SPREAD_PAGE and PF_SPREAD_SLAB atomic flags.
v4:
- updated mm/slab.c. (Fengguang Wu)
- updated Documentation.
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Miao Xie <[email protected]>
Cc: Kees Cook <[email protected]>
Fixes: 950592f7b991 ("cpusets: update tasks' page/slab spread flags in time")
Reported-by: Tetsuo Handa <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
[lizf: Backported to 3.4:
- adjust context
- check current->flags & PF_MEMPOLICY rather than current->mempolicy]
---
Documentation/cgroups/cpusets.txt | 6 +++---
include/linux/cpuset.h | 4 ++--
include/linux/sched.h | 12 ++++++++++--
kernel/cpuset.c | 9 +++++----
mm/slab.c | 4 ++--
5 files changed, 22 insertions(+), 13 deletions(-)
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index cefd3d8..a52a39f 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -345,14 +345,14 @@ the named feature on.
The implementation is simple.
Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag
-PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
+PFA_SPREAD_PAGE for each task that is in that cpuset or subsequently
joins that cpuset. The page allocation calls for the page cache
-is modified to perform an inline check for this PF_SPREAD_PAGE task
+is modified to perform an inline check for this PFA_SPREAD_PAGE task
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
Similarly, setting 'cpuset.memory_spread_slab' turns on the flag
-PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
+PFA_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
The cpuset_mem_spread_node() routine is also simple. It uses the
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 668f66b..bb48be7 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -74,12 +74,12 @@ extern int cpuset_slab_spread_node(void);
static inline int cpuset_do_page_mem_spread(void)
{
- return current->flags & PF_SPREAD_PAGE;
+ return task_spread_page(current);
}
static inline int cpuset_do_slab_mem_spread(void)
{
- return current->flags & PF_SPREAD_SLAB;
+ return task_spread_slab(current);
}
extern int current_cpuset_is_being_rebound(void);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b85b719..56d8233 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1834,8 +1834,6 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *
#define PF_KTHREAD 0x00200000 /* I am a kernel thread */
#define PF_RANDOMIZE 0x00400000 /* randomize virtual address space */
#define PF_SWAPWRITE 0x00800000 /* Allowed to write to swap */
-#define PF_SPREAD_PAGE 0x01000000 /* Spread page cache over cpuset */
-#define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */
#define PF_THREAD_BOUND 0x04000000 /* Thread bound to specific cpu */
#define PF_MCE_EARLY 0x08000000 /* Early kill for mce process policy */
#define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */
@@ -1868,6 +1866,8 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *
#define used_math() tsk_used_math(current)
/* Per-process atomic flags. */
+#define PFA_SPREAD_PAGE 1 /* Spread page cache over cpuset */
+#define PFA_SPREAD_SLAB 2 /* Spread some slab caches over cpuset */
#define TASK_PFA_TEST(name, func) \
static inline bool task_##func(struct task_struct *p) \
@@ -1970,6 +1970,14 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
}
#endif
+TASK_PFA_TEST(SPREAD_PAGE, spread_page)
+TASK_PFA_SET(SPREAD_PAGE, spread_page)
+TASK_PFA_CLEAR(SPREAD_PAGE, spread_page)
+
+TASK_PFA_TEST(SPREAD_SLAB, spread_slab)
+TASK_PFA_SET(SPREAD_SLAB, spread_slab)
+TASK_PFA_CLEAR(SPREAD_SLAB, spread_slab)
+
/*
* Do not use outside of architecture code which knows its limitations.
*
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 9cb82b9..7f3bde5 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -326,13 +326,14 @@ static void cpuset_update_task_spread_flag(struct cpuset *cs,
struct task_struct *tsk)
{
if (is_spread_page(cs))
- tsk->flags |= PF_SPREAD_PAGE;
+ task_set_spread_page(tsk);
else
- tsk->flags &= ~PF_SPREAD_PAGE;
+ task_clear_spread_page(tsk);
+
if (is_spread_slab(cs))
- tsk->flags |= PF_SPREAD_SLAB;
+ task_set_spread_slab(tsk);
else
- tsk->flags &= ~PF_SPREAD_SLAB;
+ task_clear_spread_slab(tsk);
}
/*
diff --git a/mm/slab.c b/mm/slab.c
index 3eb1c38..3714dd9 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3321,7 +3321,7 @@ static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)
#ifdef CONFIG_NUMA
/*
- * Try allocating on another node if PF_SPREAD_SLAB|PF_MEMPOLICY.
+ * Try allocating on another node if PFA_SPREAD_SLAB|PF_MEMPOLICY.
*
* If we are in_interrupt, then process context, including cpusets and
* mempolicy, may not apply and should not be used for allocation policy.
@@ -3562,7 +3562,7 @@ __do_cache_alloc(struct kmem_cache *cache, gfp_t flags)
{
void *objp;
- if (unlikely(current->flags & (PF_SPREAD_SLAB | PF_MEMPOLICY))) {
+ if (unlikely((current->flags & PF_MEMPOLICY) || cpuset_do_slab_mem_spread())) {
objp = alternate_node_alloc(cache, flags);
if (objp)
goto out;
--
1.9.1
From: Zefan Li <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit e0e5070b20e01f0321f97db4e4e174f3f6b49e50 upstream.
This will simplify code when we add new flags.
v3:
- Kees pointed out that no_new_privs should never be cleared, so we
shouldn't define task_clear_no_new_privs(). we define 3 macros instead
of a single one.
v2:
- updated scripts/tags.sh, suggested by Peter
Cc: Ingo Molnar <[email protected]>
Cc: Miao Xie <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
[lizf: Backported to 3.4:
- adjust context
- remove no_new_priv code
- add atomic_flags to struct task_struct]
---
include/linux/sched.h | 13 +++++++++++++
scripts/tags.sh | 10 ++++++++--
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8cd5cb8..b85b719 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1359,6 +1359,7 @@ struct task_struct {
/* IRQ handler threads */
unsigned irq_thread:1;
#endif
+ unsigned long atomic_flags; /* Flags needing atomic access. */
pid_t pid;
pid_t tgid;
@@ -1866,6 +1867,18 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *
#define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
#define used_math() tsk_used_math(current)
+/* Per-process atomic flags. */
+
+#define TASK_PFA_TEST(name, func) \
+ static inline bool task_##func(struct task_struct *p) \
+ { return test_bit(PFA_##name, &p->atomic_flags); }
+#define TASK_PFA_SET(name, func) \
+ static inline void task_set_##func(struct task_struct *p) \
+ { set_bit(PFA_##name, &p->atomic_flags); }
+#define TASK_PFA_CLEAR(name, func) \
+ static inline void task_clear_##func(struct task_struct *p) \
+ { clear_bit(PFA_##name, &p->atomic_flags); }
+
/*
* task->jobctl flags
*/
diff --git a/scripts/tags.sh b/scripts/tags.sh
index cf7b12f..246e4f6 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -153,7 +153,10 @@ exuberant()
--regex-c++='/CLEARPAGEFLAG_NOOP\(([^,)]*).*/ClearPage\1/' \
--regex-c++='/__CLEARPAGEFLAG_NOOP\(([^,)]*).*/__ClearPage\1/' \
--regex-c++='/TESTCLEARFLAG_FALSE\(([^,)]*).*/TestClearPage\1/' \
- --regex-c++='/__TESTCLEARFLAG_FALSE\(([^,)]*).*/__TestClearPage\1/'
+ --regex-c++='/__TESTCLEARFLAG_FALSE\(([^,)]*).*/__TestClearPage\1/'\
+ --regex-c++='/TASK_PFA_TEST\([^,]*,\s*([^)]*)\)/task_\1/' \
+ --regex-c++='/TASK_PFA_SET\([^,]*,\s*([^)]*)\)/task_set_\1/' \
+ --regex-c++='/TASK_PFA_CLEAR\([^,]*,\s*([^)]*)\)/task_clear_\1/'
all_kconfigs | xargs $1 -a \
--langdef=kconfig --language-force=kconfig \
@@ -195,7 +198,10 @@ emacs()
--regex='/CLEARPAGEFLAG_NOOP\(([^,)]*).*/ClearPage\1/' \
--regex='/__CLEARPAGEFLAG_NOOP\(([^,)]*).*/__ClearPage\1/' \
--regex='/TESTCLEARFLAG_FALSE\(([^,)]*).*/TestClearPage\1/' \
- --regex='/__TESTCLEARFLAG_FALSE\(([^,)]*).*/__TestClearPage\1/'
+ --regex='/__TESTCLEARFLAG_FALSE\(([^,)]*).*/__TestClearPage\1/'\
+ --regex='/TASK_PFA_TEST\([^,]*,\s*([^)]*)\)/task_\1/' \
+ --regex='/TASK_PFA_SET\([^,]*,\s*([^)]*)\)/task_set_\1/' \
+ --regex='/TASK_PFA_CLEAR\([^,]*,\s*([^)]*)\)/task_clear_\1/'
all_kconfigs | xargs $1 -a \
--regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'
--
1.9.1
From: Anton Altaparmakov <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit f2d5a94436cc7cc0221b9a81bba2276a25187dd3 upstream.
On 32-bit architectures, the legacy buffer_head functions are not always
handling the sector number with the proper 64-bit types, and will thus
fail on 4TB+ disks.
Any code that uses __getblk() (and thus bread(), breadahead(),
sb_bread(), sb_breadahead(), sb_getblk()), and calls it using a 64-bit
block on a 32-bit arch (where "long" is 32-bit) causes an inifinite loop
in __getblk_slow() with an infinite stream of errors logged to dmesg
like this:
__find_get_block_slow() failed. block=6740375944, b_blocknr=2445408648
b_state=0x00000020, b_size=512
device sda1 blocksize: 512
Note how in hex block is 0x191C1F988 and b_blocknr is 0x91C1F988 i.e. the
top 32-bits are missing (in this case the 0x1 at the top).
This is because grow_dev_page() is broken and has a 32-bit overflow due
to shifting the page index value (a pgoff_t - which is just 32 bits on
32-bit architectures) left-shifted as the block number. But the top
bits to get lost as the pgoff_t is not type cast to sector_t / 64-bit
before the shift.
This patch fixes this issue by type casting "index" to sector_t before
doing the left shift.
Note this is not a theoretical bug but has been seen in the field on a
4TiB hard drive with logical sector size 512 bytes.
This patch has been verified to fix the infinite loop problem on 3.17-rc5
kernel using a 4TB disk image mounted using "-o loop". Without this patch
doing a "find /nt" where /nt is an NTFS volume causes the inifinite loop
100% reproducibly whilst with the patch it works fine as expected.
Signed-off-by: Anton Altaparmakov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
fs/buffer.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/buffer.c b/fs/buffer.c
index 9bf31ac..f235e18 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -971,7 +971,8 @@ grow_dev_page(struct block_device *bdev, sector_t block,
bh = page_buffers(page);
if (bh->b_size == size) {
end_block = init_page_buffers(page, bdev,
- index << sizebits, size);
+ (sector_t)index << sizebits,
+ size);
goto done;
}
if (!try_to_free_buffers(page))
@@ -992,7 +993,8 @@ grow_dev_page(struct block_device *bdev, sector_t block,
*/
spin_lock(&inode->i_mapping->private_lock);
link_dev_buffers(page, bh);
- end_block = init_page_buffers(page, bdev, index << sizebits, size);
+ end_block = init_page_buffers(page, bdev, (sector_t)index << sizebits,
+ size);
spin_unlock(&inode->i_mapping->private_lock);
done:
ret = (block < end_block) ? 1 : -ENXIO;
--
1.9.1
From: John David Anglin <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit d26a7730b5874a5fa6779c62f4ad7c5065a94723 upstream.
In spite of what the GCC manual says, the -mfast-indirect-calls has
never been supported in the 64-bit parisc compiler. Indirect calls have
always been done using function descriptors irrespective of the
-mfast-indirect-calls option.
Recently, it was noticed that a function descriptor was always requested
when the -mfast-indirect-calls option was specified. This caused
problems when the option was used in application code and doesn't make
any sense because the whole point of the option is to avoid using a
function descriptor for indirect calls.
Fixing this broke 64-bit kernel builds.
I will fix GCC but for now we need the attached change. This results in
the same kernel code as before.
Signed-off-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
arch/parisc/Makefile | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 19ab7b2..ac93ca2 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -51,7 +51,12 @@ cflags-y := -pipe
# These flags should be implied by an hppa-linux configuration, but they
# are not in gcc 3.2.
-cflags-y += -mno-space-regs -mfast-indirect-calls
+cflags-y += -mno-space-regs
+
+# -mfast-indirect-calls is only relevant for 32-bit kernels.
+ifndef CONFIG_64BIT
+cflags-y += -mfast-indirect-calls
+endif
# Currently we save and restore fpregs on all kernel entry/interruption paths.
# If that gets optimized, we might need to disable the use of fpregs in the
--
1.9.1
From: Marc Kleine-Budde <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit de5944883ebbedbf5adc8497659772f5da7b7d72 upstream.
After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid
side effects when the RX-FIFO is full, this patch puts the TX mailbox into
TX_INACTIVE mode in the transmission complete interrupt handler. This, of
course, leaves a race window between the actual completion of the transmission
and the handling of tx-complete interrupt. However this is the best we can do
without busy polling the tx complete interrupt.
Signed-off-by: Marc Kleine-Budde <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/net/can/flexcan.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 681fb9c..b523e65 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -633,6 +633,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) {
stats->tx_bytes += can_get_echo_skb(dev, 0);
stats->tx_packets++;
+ /* after sending a RTR frame mailbox is in RX mode */
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+ ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
flexcan_write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1);
netif_wake_queue(dev);
}
--
1.9.1
From: Mark <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit c80b4495c61636edc58fe1ce300f09f24db28e10 upstream.
This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB-
SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The
US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI
chain to be accessed. Without it only the (single) device with SCSI ID 0
can be used.
The standalone converter sold by Entrega had model number U1-SC25. Xircom
acquired Entrega and re-branded the product line PortGear. The PortGear USB
to SCSI Converter (model PGSCSI) is internally identical to the Entrega
product, but later models may use a different USB ID. The Entrega-branded
units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and
Macintosh drivers also support 085A:0028.
Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac
(8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as
a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may
have initially used the same ID as the standalone U1-SC25 (1645:0007), but
later production used 085A:0026.
My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133
probably also exist.
This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows
driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I
couldn't find any mention of that actually existing in the wild; perhaps it
was cancelled before release?
Signed-off-by: Mark Knibbs <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 8642da6..a280945 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1117,6 +1117,18 @@ UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE),
+UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB-SCSI (Mac USB Dock)",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Submitted by Jan De Luyck <[email protected]> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
@@ -1937,6 +1949,14 @@ UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+ * and Mac USB Dock USB-SCSI */
+UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133,
+ "Entrega Technologies",
+ "USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Robert Schedel <[email protected]>
* Note: this is a 'super top' device like the above 14cd/6600 device */
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
--
1.9.1
From: Marc Kleine-Budde <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit c32fe4ad3e4861b2bfa1f44114c564935a123dda upstream.
This patch fixes the initialization of the TX mailbox. It is now correctly
initialized as TX_INACTIVE not RX_EMPTY.
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/net/can/flexcan.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 75e9233..062bbe2 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -134,6 +134,17 @@
/* FLEXCAN message buffers */
#define FLEXCAN_MB_CNT_CODE(x) (((x) & 0xf) << 24)
+#define FLEXCAN_MB_CODE_RX_INACTIVE (0x0 << 24)
+#define FLEXCAN_MB_CODE_RX_EMPTY (0x4 << 24)
+#define FLEXCAN_MB_CODE_RX_FULL (0x2 << 24)
+#define FLEXCAN_MB_CODE_RX_OVERRRUN (0x6 << 24)
+#define FLEXCAN_MB_CODE_RX_RANSWER (0xa << 24)
+
+#define FLEXCAN_MB_CODE_TX_INACTIVE (0x8 << 24)
+#define FLEXCAN_MB_CODE_TX_ABORT (0x9 << 24)
+#define FLEXCAN_MB_CODE_TX_DATA (0xc << 24)
+#define FLEXCAN_MB_CODE_TX_TANSWER (0xe << 24)
+
#define FLEXCAN_MB_CNT_SRR BIT(22)
#define FLEXCAN_MB_CNT_IDE BIT(21)
#define FLEXCAN_MB_CNT_RTR BIT(20)
@@ -734,8 +745,8 @@ static int flexcan_chip_start(struct net_device *dev)
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
flexcan_write(reg_ctrl, ®s->ctrl);
- /* Abort any pending TX, mark Mailbox as INACTIVE */
- flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
+ /* mark TX mailbox as INACTIVE */
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
/* acceptance mask/acceptance code (accept everything) */
--
1.9.1
From: David Jander <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit fc05b884a31dbf259cc73cc856e634ec3acbebb6 upstream.
Apparently mailboxes may contain random data at startup, causing some of them
being prepared for message reception. This causes overruns being missed or even
confusing the IRQ check for trasmitted messages, increasing the transmit
counter instead of the error counter.
This patch initializes all mailboxes after the FIFO as RX_INACTIVE.
Signed-off-by: David Jander <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/net/can/flexcan.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 062bbe2..1331558 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -680,6 +680,7 @@ static int flexcan_chip_start(struct net_device *dev)
struct flexcan_regs __iomem *regs = priv->base;
int err;
u32 reg_mcr, reg_ctrl;
+ int i;
/* enable module */
flexcan_chip_enable(priv);
@@ -745,6 +746,12 @@ static int flexcan_chip_start(struct net_device *dev)
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
flexcan_write(reg_ctrl, ®s->ctrl);
+ /* clear and invalidate all mailboxes first */
+ for (i = FLEXCAN_TX_BUF_ID; i < ARRAY_SIZE(regs->cantxfg); i++) {
+ flexcan_write(FLEXCAN_MB_CODE_RX_INACTIVE,
+ ®s->cantxfg[i].can_ctrl);
+ }
+
/* mark TX mailbox as INACTIVE */
flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
--
1.9.1
From: Mike Christie <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit db9bfd64b14a3a8f1868d2164518fdeab1b26ad1 upstream.
This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu.
This function is used by iscsi drivers and userspace to send iscsi PDUs/
commands. For login commands, we have a set buffer size. For all other
commands we do not support data buffers.
This was reported by Dan Carpenter here:
http://www.spinics.net/lists/linux-scsi/msg66838.html
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/scsi/libiscsi.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 82c3fd4..1243d2f 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -718,11 +718,21 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
return NULL;
}
+ if (data_size > ISCSI_DEF_MAX_RECV_SEG_LEN) {
+ iscsi_conn_printk(KERN_ERR, conn, "Invalid buffer len of %u for login task. Max len is %u\n", data_size, ISCSI_DEF_MAX_RECV_SEG_LEN);
+ return NULL;
+ }
+
task = conn->login_task;
} else {
if (session->state != ISCSI_STATE_LOGGED_IN)
return NULL;
+ if (data_size != 0) {
+ iscsi_conn_printk(KERN_ERR, conn, "Can not send data buffer of len %u for op 0x%x\n", data_size, opcode);
+ return NULL;
+ }
+
BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE);
BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED);
--
1.9.1
From: Nicholas Bellinger <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit b53b0d99d6fbf7d44330395349a895521cfdbc96 upstream.
This patch fixes a bug in iscsit_logout_post_handler_diffcid() where
a pointer used as storage for list_for_each_entry() was incorrectly
being used to determine if no matching entry had been found.
This patch changes iscsit_logout_post_handler_diffcid() to key off
bool conn_found to determine if the function needs to exit early.
Reported-by: Joern Engel <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index d7ac2c0..56d02e0 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4297,6 +4297,7 @@ static void iscsit_logout_post_handler_diffcid(
{
struct iscsi_conn *l_conn;
struct iscsi_session *sess = conn->sess;
+ bool conn_found = false;
if (!sess)
return;
@@ -4305,12 +4306,13 @@ static void iscsit_logout_post_handler_diffcid(
list_for_each_entry(l_conn, &sess->sess_conn_list, conn_list) {
if (l_conn->cid == cid) {
iscsit_inc_conn_usage_count(l_conn);
+ conn_found = true;
break;
}
}
spin_unlock_bh(&sess->conn_lock);
- if (!l_conn)
+ if (!conn_found)
return;
if (l_conn->sock)
--
1.9.1
From: Charles Keepax <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 133c2681c4a0c1b589d138c2fdd0f131bdce20ed upstream.
In a couple of places the driver is missing a check to ensure there is a
secondary DAI before it de-references the pointer to it, causing a null
pointer de-reference. This patch adds a check to avoid this.
Signed-off-by: Charles Keepax <[email protected]>
Acked-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
[lizf: Backported to 3.4: drop the changes to i2s_shutdown()]
Signed-off-by: Zefan Li <[email protected]>
---
sound/soc/samsung/i2s.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index 6ac7b82..9998719 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -392,7 +392,7 @@ static int i2s_set_sysclk(struct snd_soc_dai *dai,
if (dir == SND_SOC_CLOCK_IN)
rfs = 0;
- if ((rfs && other->rfs && (other->rfs != rfs)) ||
+ if ((rfs && other && other->rfs && (other->rfs != rfs)) ||
(any_active(i2s) &&
(((dir == SND_SOC_CLOCK_IN)
&& !(mod & MOD_CDCLKCON)) ||
--
1.9.1
From: Andrew Hunter <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit d78c9300c51d6ceed9f6d078d4e9366f259de28c upstream.
timeval_to_jiffies tried to round a timeval up to an integral number
of jiffies, but the logic for doing so was incorrect: intervals
corresponding to exactly N jiffies would become N+1. This manifested
itself particularly repeatedly stopping/starting an itimer:
setitimer(ITIMER_PROF, &val, NULL);
setitimer(ITIMER_PROF, NULL, &val);
would add a full tick to val, _even if it was exactly representable in
terms of jiffies_ (say, the result of a previous rounding.) Doing
this repeatedly would cause unbounded growth in val. So fix the math.
Here's what was wrong with the conversion: we essentially computed
(eliding seconds)
jiffies = usec * (NSEC_PER_USEC/TICK_NSEC)
by using scaling arithmetic, which took the best approximation of
NSEC_PER_USEC/TICK_NSEC with denominator of 2^USEC_JIFFIE_SC =
x/(2^USEC_JIFFIE_SC), and computed:
jiffies = (usec * x) >> USEC_JIFFIE_SC
and rounded this calculation up in the intermediate form (since we
can't necessarily exactly represent TICK_NSEC in usec.) But the
scaling arithmetic is a (very slight) *over*approximation of the true
value; that is, instead of dividing by (1 usec/ 1 jiffie), we
effectively divided by (1 usec/1 jiffie)-epsilon (rounding
down). This would normally be fine, but we want to round timeouts up,
and we did so by adding 2^USEC_JIFFIE_SC - 1 before the shift; this
would be fine if our division was exact, but dividing this by the
slightly smaller factor was equivalent to adding just _over_ 1 to the
final result (instead of just _under_ 1, as desired.)
In particular, with HZ=1000, we consistently computed that 10000 usec
was 11 jiffies; the same was true for any exact multiple of
TICK_NSEC.
We could possibly still round in the intermediate form, adding
something less than 2^USEC_JIFFIE_SC - 1, but easier still is to
convert usec->nsec, round in nanoseconds, and then convert using
time*spec*_to_jiffies. This adds one constant multiplication, and is
not observably slower in microbenchmarks on recent x86 hardware.
Tested: the following program:
int main() {
struct itimerval zero = {{0, 0}, {0, 0}};
/* Initially set to 10 ms. */
struct itimerval initial = zero;
initial.it_interval.tv_usec = 10000;
setitimer(ITIMER_PROF, &initial, NULL);
/* Save and restore several times. */
for (size_t i = 0; i < 10; ++i) {
struct itimerval prev;
setitimer(ITIMER_PROF, &zero, &prev);
/* on old kernels, this goes up by TICK_USEC every iteration */
printf("previous value: %ld %ld %ld %ld\n",
prev.it_interval.tv_sec, prev.it_interval.tv_usec,
prev.it_value.tv_sec, prev.it_value.tv_usec);
setitimer(ITIMER_PROF, &prev, NULL);
}
return 0;
}
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Turner <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Reviewed-by: Paul Turner <[email protected]>
Reported-by: Aaron Jacobs <[email protected]>
Signed-off-by: Andrew Hunter <[email protected]>
[jstultz: Tweaked to apply to 3.17-rc]
Signed-off-by: John Stultz <[email protected]>
[lizf: Backported to 3.4: adjust filename]
Signed-off-by: Zefan Li <[email protected]>
---
include/linux/jiffies.h | 12 -----------
kernel/time.c | 54 +++++++++++++++++++++++++++----------------------
2 files changed, 30 insertions(+), 36 deletions(-)
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index f5df3dc..f4e8578 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -259,23 +259,11 @@ extern unsigned long preset_lpj;
#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
#endif
#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
-#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
TICK_NSEC -1) / (u64)TICK_NSEC))
#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
TICK_NSEC -1) / (u64)TICK_NSEC))
-#define USEC_CONVERSION \
- ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
- TICK_NSEC -1) / (u64)TICK_NSEC))
-/*
- * USEC_ROUND is used in the timeval to jiffie conversion. See there
- * for more details. It is the scaled resolution rounding value. Note
- * that it is a 64-bit value. Since, when it is applied, we are already
- * in jiffies (albit scaled), it is nothing but the bits we will shift
- * off.
- */
-#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
/*
* The maximum jiffie value is (MAX_INT >> 1). Here we translate that
* into seconds. The 64-bit case will overflow if we are not careful,
diff --git a/kernel/time.c b/kernel/time.c
index ba744cf..a095290 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -487,17 +487,20 @@ EXPORT_SYMBOL(usecs_to_jiffies);
* that a remainder subtract here would not do the right thing as the
* resolution values don't fall on second boundries. I.e. the line:
* nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
+ * Note that due to the small error in the multiplier here, this
+ * rounding is incorrect for sufficiently large values of tv_nsec, but
+ * well formed timespecs should have tv_nsec < NSEC_PER_SEC, so we're
+ * OK.
*
* Rather, we just shift the bits off the right.
*
* The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
* value to a scaled second value.
*/
-unsigned long
-timespec_to_jiffies(const struct timespec *value)
+static unsigned long
+__timespec_to_jiffies(unsigned long sec, long nsec)
{
- unsigned long sec = value->tv_sec;
- long nsec = value->tv_nsec + TICK_NSEC - 1;
+ nsec = nsec + TICK_NSEC - 1;
if (sec >= MAX_SEC_IN_JIFFIES){
sec = MAX_SEC_IN_JIFFIES;
@@ -508,6 +511,13 @@ timespec_to_jiffies(const struct timespec *value)
(NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
}
+
+unsigned long
+timespec_to_jiffies(const struct timespec *value)
+{
+ return __timespec_to_jiffies(value->tv_sec, value->tv_nsec);
+}
+
EXPORT_SYMBOL(timespec_to_jiffies);
void
@@ -524,31 +534,27 @@ jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
}
EXPORT_SYMBOL(jiffies_to_timespec);
-/* Same for "timeval"
+/*
+ * We could use a similar algorithm to timespec_to_jiffies (with a
+ * different multiplier for usec instead of nsec). But this has a
+ * problem with rounding: we can't exactly add TICK_NSEC - 1 to the
+ * usec value, since it's not necessarily integral.
*
- * Well, almost. The problem here is that the real system resolution is
- * in nanoseconds and the value being converted is in micro seconds.
- * Also for some machines (those that use HZ = 1024, in-particular),
- * there is a LARGE error in the tick size in microseconds.
-
- * The solution we use is to do the rounding AFTER we convert the
- * microsecond part. Thus the USEC_ROUND, the bits to be shifted off.
- * Instruction wise, this should cost only an additional add with carry
- * instruction above the way it was done above.
+ * We could instead round in the intermediate scaled representation
+ * (i.e. in units of 1/2^(large scale) jiffies) but that's also
+ * perilous: the scaling introduces a small positive error, which
+ * combined with a division-rounding-upward (i.e. adding 2^(scale) - 1
+ * units to the intermediate before shifting) leads to accidental
+ * overflow and overestimates.
+ *
+ * At the cost of one additional multiplication by a constant, just
+ * use the timespec implementation.
*/
unsigned long
timeval_to_jiffies(const struct timeval *value)
{
- unsigned long sec = value->tv_sec;
- long usec = value->tv_usec;
-
- if (sec >= MAX_SEC_IN_JIFFIES){
- sec = MAX_SEC_IN_JIFFIES;
- usec = 0;
- }
- return (((u64)sec * SEC_CONVERSION) +
- (((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
- (USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+ return __timespec_to_jiffies(value->tv_sec,
+ value->tv_usec * NSEC_PER_USEC);
}
EXPORT_SYMBOL(timeval_to_jiffies);
--
1.9.1
From: Al Viro <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 7bd88377d482e1eae3c5329b12e33cfd664fa6a9 upstream.
return the value instead, and have path_init() do the assignment. Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination. This one should go where
it went.
To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers. And do the same to set_root(), to keep them
in sync.
Signed-off-by: Al Viro <[email protected]>
[lizf: Backported to 3.4:
- remove the changes to follow_link() as it doesn't call set_root()]
Signed-off-by: Zefan Li <[email protected]>
---
fs/namei.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/fs/namei.c b/fs/namei.c
index c427919..5974fb5 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -553,24 +553,22 @@ static int complete_walk(struct nameidata *nd)
static __always_inline void set_root(struct nameidata *nd)
{
- if (!nd->root.mnt)
- get_fs_root(current->fs, &nd->root);
+ get_fs_root(current->fs, &nd->root);
}
static int link_path_walk(const char *, struct nameidata *);
-static __always_inline void set_root_rcu(struct nameidata *nd)
+static __always_inline unsigned set_root_rcu(struct nameidata *nd)
{
- if (!nd->root.mnt) {
- struct fs_struct *fs = current->fs;
- unsigned seq;
+ struct fs_struct *fs = current->fs;
+ unsigned seq, res;
- do {
- seq = read_seqcount_begin(&fs->seq);
- nd->root = fs->root;
- nd->seq = __read_seqcount_begin(&nd->root.dentry->d_seq);
- } while (read_seqcount_retry(&fs->seq, seq));
- }
+ do {
+ seq = read_seqcount_begin(&fs->seq);
+ nd->root = fs->root;
+ res = __read_seqcount_begin(&nd->root.dentry->d_seq);
+ } while (read_seqcount_retry(&fs->seq, seq));
+ return res;
}
static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *link)
@@ -928,7 +926,8 @@ static void follow_mount_rcu(struct nameidata *nd)
static int follow_dotdot_rcu(struct nameidata *nd)
{
- set_root_rcu(nd);
+ if (!nd->root.mnt)
+ set_root_rcu(nd);
while (1) {
if (nd->path.dentry == nd->root.dentry &&
@@ -1031,7 +1030,8 @@ static void follow_mount(struct path *path)
static void follow_dotdot(struct nameidata *nd)
{
- set_root(nd);
+ if (!nd->root.mnt)
+ set_root(nd);
while(1) {
struct dentry *old = nd->path.dentry;
@@ -1633,7 +1633,7 @@ static int path_init(int dfd, const char *name, unsigned int flags,
if (flags & LOOKUP_RCU) {
br_read_lock(vfsmount_lock);
rcu_read_lock();
- set_root_rcu(nd);
+ nd->seq = set_root_rcu(nd);
} else {
set_root(nd);
path_get(&nd->root);
--
1.9.1
From: Thomas Gleixner <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 13c42c2f43b19aab3195f2d357db00d1e885eaa8 upstream.
futex_wait_requeue_pi() calls futex_wait_setup(). If
futex_wait_setup() succeeds it returns with hb->lock held and
preemption disabled. Now the sanity check after this does:
if (match_futex(&q.key, &key2)) {
ret = -EINVAL;
goto out_put_keys;
}
which releases the keys but does not release hb->lock.
So we happily return to user space with hb->lock held and therefor
preemption disabled.
Unlock hb->lock before taking the exit route.
Reported-by: Dave "Trinity" Jones <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Darren Hart <[email protected]>
Reviewed-by: Davidlohr Bueso <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1409112318500.4178@nanos
Signed-off-by: Thomas Gleixner <[email protected]>
[lizf: Backported to 3.4: queue_unlock() takes two parameters]
Signed-off-by: Zefan Li <[email protected]>
---
kernel/futex.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/futex.c b/kernel/futex.c
index 9396b7b..41dfb18 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -2460,6 +2460,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags,
* shared futexes. We need to compare the keys:
*/
if (match_futex(&q.key, &key2)) {
+ queue_unlock(&q, hb);
ret = -EINVAL;
goto out_put_keys;
}
--
1.9.1
This is the combined patch for 3.4.105-rc1 relative to 3.4.104.
---
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index cefd3d8..a52a39f 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -345,14 +345,14 @@ the named feature on.
The implementation is simple.
Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag
-PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
+PFA_SPREAD_PAGE for each task that is in that cpuset or subsequently
joins that cpuset. The page allocation calls for the page cache
-is modified to perform an inline check for this PF_SPREAD_PAGE task
+is modified to perform an inline check for this PFA_SPREAD_PAGE task
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
Similarly, setting 'cpuset.memory_spread_slab' turns on the flag
-PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
+PFA_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
The cpuset_mem_spread_node() routine is also simple. It uses the
diff --git a/Makefile b/Makefile
index b66396e..553fe19 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 4
-SUBLEVEL = 104
-EXTRAVERSION =
+SUBLEVEL = 105
+EXTRAVERSION = -rc1
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index fc000e3..17f4ea2 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -39,6 +39,7 @@
* This code is not portable to processors with late data abort handling.
*/
#define CODING_BITS(i) (i & 0x0e000000)
+#define COND_BITS(i) (i & 0xf0000000)
#define LDST_I_BIT(i) (i & (1 << 26)) /* Immediate constant */
#define LDST_P_BIT(i) (i & (1 << 24)) /* Preindex */
@@ -813,6 +814,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
break;
case 0x04000000: /* ldr or str immediate */
+ if (COND_BITS(instr) == 0xf0000000) /* NEON VLDn, VSTn */
+ goto bad;
offset.un = OFFSET_BITS(instr);
handler = do_alignment_ldrstr;
break;
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 5cad0fa..ca51d69 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -13,6 +13,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/string.h>
#include <asm/addrspace.h>
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index 4c968e7..55eca41 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -119,7 +119,11 @@ NESTED(_mcount, PT_SIZE, ra)
nop
#endif
b ftrace_stub
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#else
nop
+#endif
static_trace:
MCOUNT_SAVE_REGS
@@ -129,6 +133,9 @@ static_trace:
move a1, AT /* arg2: parent's return address */
MCOUNT_RESTORE_REGS
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#endif
.globl ftrace_stub
ftrace_stub:
RETURN_BACK
@@ -177,6 +184,11 @@ NESTED(ftrace_graph_caller, PT_SIZE, ra)
jal prepare_ftrace_return
nop
MCOUNT_RESTORE_REGS
+#ifndef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#endif
+#endif
RETURN_BACK
END(ftrace_graph_caller)
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 19ab7b2..ac93ca2 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -51,7 +51,12 @@ cflags-y := -pipe
# These flags should be implied by an hppa-linux configuration, but they
# are not in gcc 3.2.
-cflags-y += -mno-space-regs -mfast-indirect-calls
+cflags-y += -mno-space-regs
+
+# -mfast-indirect-calls is only relevant for 32-bit kernels.
+ifndef CONFIG_64BIT
+cflags-y += -mfast-indirect-calls
+endif
# Currently we save and restore fpregs on all kernel entry/interruption paths.
# If that gets optimized, we might need to disable the use of fpregs in the
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 53c973e..0f250d1 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -566,17 +566,6 @@ rerun_vcpu:
BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL);
- switch (kvm_run->exit_reason) {
- case KVM_EXIT_S390_SIEIC:
- case KVM_EXIT_UNKNOWN:
- case KVM_EXIT_INTR:
- case KVM_EXIT_S390_RESET:
- case KVM_EXIT_S390_UCONTROL:
- break;
- default:
- BUG();
- }
-
vcpu->arch.sie_block->gpsw.mask = kvm_run->psw_mask;
vcpu->arch.sie_block->gpsw.addr = kvm_run->psw_addr;
if (kvm_run->kvm_dirty_regs & KVM_SYNC_PREFIX) {
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index d28c595..c7dbf02 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1248,6 +1248,9 @@ static void remove_siblinginfo(int cpu)
for_each_cpu(sibling, cpu_sibling_mask(cpu))
cpumask_clear_cpu(cpu, cpu_sibling_mask(sibling));
+ for_each_cpu(sibling, cpu_llc_shared_mask(cpu))
+ cpumask_clear_cpu(cpu, cpu_llc_shared_mask(sibling));
+ cpumask_clear(cpu_llc_shared_mask(cpu));
cpumask_clear(cpu_sibling_mask(cpu));
cpumask_clear(cpu_core_mask(cpu));
c->phys_proc_id = 0;
diff --git a/block/genhd.c b/block/genhd.c
index d815a0f..60f7e6c 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -27,10 +27,10 @@ struct kobject *block_depr;
/* for extended dynamic devt allocation, currently only one major is used */
#define NR_EXT_DEVT (1 << MINORBITS)
-/* For extended devt allocation. ext_devt_mutex prevents look up
+/* For extended devt allocation. ext_devt_lock prevents look up
* results from going away underneath its user.
*/
-static DEFINE_MUTEX(ext_devt_mutex);
+static DEFINE_SPINLOCK(ext_devt_lock);
static DEFINE_IDR(ext_devt_idr);
static struct device_type disk_type;
@@ -420,13 +420,13 @@ int blk_alloc_devt(struct hd_struct *part, dev_t *devt)
do {
if (!idr_pre_get(&ext_devt_idr, GFP_KERNEL))
return -ENOMEM;
- mutex_lock(&ext_devt_mutex);
+ spin_lock(&ext_devt_lock);
rc = idr_get_new(&ext_devt_idr, part, &idx);
if (!rc && idx >= NR_EXT_DEVT) {
idr_remove(&ext_devt_idr, idx);
rc = -EBUSY;
}
- mutex_unlock(&ext_devt_mutex);
+ spin_unlock(&ext_devt_lock);
} while (rc == -EAGAIN);
if (rc)
@@ -447,15 +447,13 @@ int blk_alloc_devt(struct hd_struct *part, dev_t *devt)
*/
void blk_free_devt(dev_t devt)
{
- might_sleep();
-
if (devt == MKDEV(0, 0))
return;
if (MAJOR(devt) == BLOCK_EXT_MAJOR) {
- mutex_lock(&ext_devt_mutex);
+ spin_lock(&ext_devt_lock);
idr_remove(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
- mutex_unlock(&ext_devt_mutex);
+ spin_unlock(&ext_devt_lock);
}
}
@@ -662,7 +660,6 @@ void del_gendisk(struct gendisk *disk)
if (!sysfs_deprecated)
sysfs_remove_link(block_depr, dev_name(disk_to_dev(disk)));
device_del(disk_to_dev(disk));
- blk_free_devt(disk_to_dev(disk)->devt);
}
EXPORT_SYMBOL(del_gendisk);
@@ -687,13 +684,13 @@ struct gendisk *get_gendisk(dev_t devt, int *partno)
} else {
struct hd_struct *part;
- mutex_lock(&ext_devt_mutex);
+ spin_lock(&ext_devt_lock);
part = idr_find(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
if (part && get_disk(part_to_disk(part))) {
*partno = part->partno;
disk = part_to_disk(part);
}
- mutex_unlock(&ext_devt_mutex);
+ spin_unlock(&ext_devt_lock);
}
return disk;
@@ -1101,6 +1098,7 @@ static void disk_release(struct device *dev)
{
struct gendisk *disk = dev_to_disk(dev);
+ blk_free_devt(dev->devt);
disk_release_events(disk);
kfree(disk->random);
disk_replace_part_tbl(disk, NULL);
diff --git a/block/partition-generic.c b/block/partition-generic.c
index 7b8b8d1..daafc85 100644
--- a/block/partition-generic.c
+++ b/block/partition-generic.c
@@ -211,6 +211,7 @@ static const struct attribute_group *part_attr_groups[] = {
static void part_release(struct device *dev)
{
struct hd_struct *p = dev_to_part(dev);
+ blk_free_devt(dev->devt);
free_part_stats(p);
free_part_info(p);
kfree(p);
@@ -253,7 +254,6 @@ void delete_partition(struct gendisk *disk, int partno)
rcu_assign_pointer(ptbl->last_lookup, NULL);
kobject_put(part->holder_dir);
device_del(part_to_dev(part));
- blk_free_devt(part_devt(part));
hd_struct_put(part);
}
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6cba428..e1180ce 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1195,9 +1195,9 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
- cpuidle_pause_and_lock();
/* Protect against cpu-hotplug */
get_online_cpus();
+ cpuidle_pause_and_lock();
/* Disable all cpuidle devices */
for_each_online_cpu(cpu) {
@@ -1222,8 +1222,8 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
cpuidle_enable_device(&_pr->power.dev);
}
}
- put_online_cpus();
cpuidle_resume_and_unlock();
+ put_online_cpus();
}
return 0;
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 0a450eb..d366a75 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -305,6 +305,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x9c85), board_ahci }, /* Wildcat Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x8c82), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c84), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c86), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -435,6 +443,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
.driver_data = board_ahci_yes_fbs }, /* 88se9125 */
{ PCI_DEVICE(0x1b4b, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
+ { PCI_DEVICE(0x1b4b, 0x9182),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9182 */
{ PCI_DEVICE(0x1b4b, 0x9192),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ PCI_DEVICE(0x1b4b, 0x91a3),
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 9f165a81..2f081a3 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -362,6 +362,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
/* SATA Controller IDE (Coleto Creek) */
{ 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c88, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c89, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c80, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c81, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
{ } /* terminate list */
};
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index ca72d1f..e554542 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -48,7 +48,7 @@ bool regmap_readable(struct regmap *map, unsigned int reg)
bool regmap_volatile(struct regmap *map, unsigned int reg)
{
- if (!regmap_readable(map, reg))
+ if (!map->format.format_write && !regmap_readable(map, reg))
return false;
if (map->volatile_reg)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 98a8c05..d4550f9 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -118,10 +118,6 @@ static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
int hci_uart_tx_wakeup(struct hci_uart *hu)
{
- struct tty_struct *tty = hu->tty;
- struct hci_dev *hdev = hu->hdev;
- struct sk_buff *skb;
-
if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
return 0;
@@ -129,6 +125,22 @@ int hci_uart_tx_wakeup(struct hci_uart *hu)
BT_DBG("");
+ schedule_work(&hu->write_work);
+
+ return 0;
+}
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+ struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+ struct tty_struct *tty = hu->tty;
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+
+ /* REVISIT: should we cope with bad skbs or ->write() returning
+ * and error value ?
+ */
+
restart:
clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
@@ -153,7 +165,6 @@ restart:
goto restart;
clear_bit(HCI_UART_SENDING, &hu->tx_state);
- return 0;
}
/* ------- Interface to HCI layer ------ */
@@ -264,6 +275,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
hu->tty = tty;
tty->receive_room = 65536;
+ INIT_WORK(&hu->write_work, hci_uart_write_work);
+
spin_lock_init(&hu->rx_lock);
/* Flush any pending characters in the driver and line discipline. */
@@ -298,6 +311,8 @@ static void hci_uart_tty_close(struct tty_struct *tty)
if (hdev)
hci_uart_close(hdev);
+ cancel_work_sync(&hu->write_work);
+
if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
if (hdev) {
hci_unregister_dev(hdev);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 6cf6ab22..af93d83 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -66,6 +66,8 @@ struct hci_uart {
unsigned long flags;
unsigned long hdev_flags;
+ struct work_struct write_work;
+
struct hci_uart_proto *proto;
void *priv;
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index a2c9e56..d9e359a 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -651,7 +651,7 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
}
-static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
+static int intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Falling back to manually reading VBT from "
"VBIOS ROM for %s\n",
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index a83f7ac..b4f71c2 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -564,7 +564,7 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
.destroy = intel_encoder_destroy,
};
-static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
+static int intel_no_crt_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
return 1;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index b695ab4..77190cc 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -619,7 +619,7 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
.destroy = intel_encoder_destroy,
};
-static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+static int intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
return 1;
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 6d0c32b..1ce6743 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -463,6 +463,13 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
}
}
+ /* Fujitsu D3003-S2 board lists DVI-I as DVI-I and VGA */
+ if ((dev->pdev->device == 0x9805) &&
+ (dev->pdev->subsystem_vendor == 0x1734) &&
+ (dev->pdev->subsystem_device == 0x11bd)) {
+ if (*connector_type == DRM_MODE_CONNECTOR_VGA)
+ return false;
+ }
return true;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index a0c2f12..decca82 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -163,8 +163,9 @@ void vmw_fifo_release(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC);
while (vmw_read(dev_priv, SVGA_REG_BUSY) != 0)
- vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC);
+ ;
dev_priv->last_read_seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE);
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index d93ea64..f2c2ffe 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1218,6 +1218,13 @@ static bool elantech_is_signature_valid(const unsigned char *param)
if (param[1] == 0)
return true;
+ /*
+ * Some models have a revision higher then 20. Meaning param[2] may
+ * be 10 or 20, skip the rates check for these.
+ */
+ if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40)
+ return true;
+
for (i = 0; i < ARRAY_SIZE(rates); i++)
if (param[2] == rates[i])
return false;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 326e194..32b1363 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -517,10 +517,61 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
((buf[0] & 0x04) >> 1) |
((buf[3] & 0x04) >> 2));
+ if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+ SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
+ hw->w == 2) {
+ synaptics_parse_agm(buf, priv, hw);
+ return 1;
+ }
+
+ hw->x = (((buf[3] & 0x10) << 8) |
+ ((buf[1] & 0x0f) << 8) |
+ buf[4]);
+ hw->y = (((buf[3] & 0x20) << 7) |
+ ((buf[1] & 0xf0) << 4) |
+ buf[5]);
+ hw->z = buf[2];
+
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
+ /*
+ * ForcePads, like Clickpads, use middle button
+ * bits to report primary button clicks.
+ * Unfortunately they report primary button not
+ * only when user presses on the pad above certain
+ * threshold, but also when there are more than one
+ * finger on the touchpad, which interferes with
+ * out multi-finger gestures.
+ */
+ if (hw->z == 0) {
+ /* No contacts */
+ priv->press = priv->report_press = false;
+ } else if (hw->w >= 4 && ((buf[0] ^ buf[3]) & 0x01)) {
+ /*
+ * Single-finger touch with pressure above
+ * the threshold. If pressure stays long
+ * enough, we'll start reporting primary
+ * button. We rely on the device continuing
+ * sending data even if finger does not
+ * move.
+ */
+ if (!priv->press) {
+ priv->press_start = jiffies;
+ priv->press = true;
+ } else if (time_after(jiffies,
+ priv->press_start +
+ msecs_to_jiffies(50))) {
+ priv->report_press = true;
+ }
+ } else {
+ priv->press = false;
+ }
+
+ hw->left = priv->report_press;
+
+ } else if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/*
* Clickpad's button is transmitted as middle button,
* however, since it is primary button, we will report
@@ -539,21 +590,6 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
}
- if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
- SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
- hw->w == 2) {
- synaptics_parse_agm(buf, priv, hw);
- return 1;
- }
-
- hw->x = (((buf[3] & 0x10) << 8) |
- ((buf[1] & 0x0f) << 8) |
- buf[4]);
- hw->y = (((buf[3] & 0x20) << 7) |
- ((buf[1] & 0xf0) << 4) |
- buf[5]);
- hw->z = buf[2];
-
if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
((buf[0] ^ buf[3]) & 0x02)) {
switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index fd26ccc..ac1b773 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -77,6 +77,11 @@
* 2 0x08 image sensor image sensor tracks 5 fingers, but only
* reports 2.
* 2 0x20 report min query 0x0f gives min coord reported
+ * 2 0x80 forcepad forcepad is a variant of clickpad that
+ * does not have physical buttons but rather
+ * uses pressure above certain threshold to
+ * report primary clicks. Forcepads also have
+ * clickpad bit set.
*/
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
@@ -85,6 +90,7 @@
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800)
+#define SYN_CAP_FORCEPAD(ex0c) ((ex0c) & 0x008000)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
@@ -174,6 +180,11 @@ struct synaptics_data {
*/
struct synaptics_hw_state agm;
bool agm_pending; /* new AGM packet received */
+
+ /* ForcePad handling */
+ unsigned long press_start;
+ bool press;
+ bool report_press;
};
void synaptics_module_init(void);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 0ec9abb..1291673 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -458,6 +458,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
},
},
+ {
+ /* Avatar AVIU-145A6 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
+ },
+ },
{ }
};
@@ -601,6 +608,14 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
},
},
+ {
+ /* Fujitsu U574 laptop */
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"),
+ },
+ },
{ }
};
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 8755f5f..e4ecf3b 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/tty.h>
+#include <linux/compat.h>
MODULE_AUTHOR("Vojtech Pavlik <[email protected]>");
MODULE_DESCRIPTION("Input device TTY line discipline");
@@ -196,28 +197,55 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
return 0;
}
+static void serport_set_type(struct tty_struct *tty, unsigned long type)
+{
+ struct serport *serport = tty->disc_data;
+
+ serport->id.proto = type & 0x000000ff;
+ serport->id.id = (type & 0x0000ff00) >> 8;
+ serport->id.extra = (type & 0x00ff0000) >> 16;
+}
+
/*
* serport_ldisc_ioctl() allows to set the port protocol, and device ID
*/
-static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int serport_ldisc_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
- struct serport *serport = (struct serport*) tty->disc_data;
- unsigned long type;
-
if (cmd == SPIOCSTYPE) {
+ unsigned long type;
+
if (get_user(type, (unsigned long __user *) arg))
return -EFAULT;
- serport->id.proto = type & 0x000000ff;
- serport->id.id = (type & 0x0000ff00) >> 8;
- serport->id.extra = (type & 0x00ff0000) >> 16;
+ serport_set_type(tty, type);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_SPIOCSTYPE _IOW('q', 0x01, compat_ulong_t)
+static long serport_ldisc_compat_ioctl(struct tty_struct *tty,
+ struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ if (cmd == COMPAT_SPIOCSTYPE) {
+ void __user *uarg = compat_ptr(arg);
+ compat_ulong_t compat_type;
+
+ if (get_user(compat_type, (compat_ulong_t __user *)uarg))
+ return -EFAULT;
+ serport_set_type(tty, compat_type);
return 0;
}
return -EINVAL;
}
+#endif
static void serport_ldisc_write_wakeup(struct tty_struct * tty)
{
@@ -241,6 +269,9 @@ static struct tty_ldisc_ops serport_ldisc = {
.close = serport_ldisc_close,
.read = serport_ldisc_read,
.ioctl = serport_ldisc_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = serport_ldisc_compat_ioctl,
+#endif
.receive_buf = serport_ldisc_receive,
.write_wakeup = serport_ldisc_write_wakeup
};
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 535c3e2..926989d 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1566,6 +1566,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
unsigned int key_size, opt_params;
unsigned long long tmpll;
int ret;
+ size_t iv_size_padding;
struct dm_arg_set as;
const char *opt_string;
char dummy;
@@ -1602,12 +1603,23 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
cc->dmreq_start = sizeof(struct ablkcipher_request);
cc->dmreq_start += crypto_ablkcipher_reqsize(any_tfm(cc));
- cc->dmreq_start = ALIGN(cc->dmreq_start, crypto_tfm_ctx_alignment());
- cc->dmreq_start += crypto_ablkcipher_alignmask(any_tfm(cc)) &
- ~(crypto_tfm_ctx_alignment() - 1);
+ cc->dmreq_start = ALIGN(cc->dmreq_start, __alignof__(struct dm_crypt_request));
+
+ if (crypto_ablkcipher_alignmask(any_tfm(cc)) < CRYPTO_MINALIGN) {
+ /* Allocate the padding exactly */
+ iv_size_padding = -(cc->dmreq_start + sizeof(struct dm_crypt_request))
+ & crypto_ablkcipher_alignmask(any_tfm(cc));
+ } else {
+ /*
+ * If the cipher requires greater alignment than kmalloc
+ * alignment, we don't know the exact position of the
+ * initialization vector. We must assume worst case.
+ */
+ iv_size_padding = crypto_ablkcipher_alignmask(any_tfm(cc));
+ }
cc->req_pool = mempool_create_kmalloc_pool(MIN_IOS, cc->dmreq_start +
- sizeof(struct dm_crypt_request) + cc->iv_size);
+ sizeof(struct dm_crypt_request) + iv_size_padding + cc->iv_size);
if (!cc->req_pool) {
ti->error = "Cannot allocate crypt request mempool";
goto bad;
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 6ea905c..12328068 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1115,7 +1115,9 @@ static int at91_open(struct net_device *dev)
struct at91_priv *priv = netdev_priv(dev);
int err;
- clk_enable(priv->clk);
+ err = clk_prepare_enable(priv->clk);
+ if (err)
+ return err;
/* check or determine and set bittime */
err = open_candev(dev);
@@ -1139,7 +1141,7 @@ static int at91_open(struct net_device *dev)
out_close:
close_candev(dev);
out:
- clk_disable(priv->clk);
+ clk_disable_unprepare(priv->clk);
return err;
}
@@ -1156,7 +1158,7 @@ static int at91_close(struct net_device *dev)
at91_chip_stop(dev, CAN_STATE_STOPPED);
free_irq(dev->irq, dev);
- clk_disable(priv->clk);
+ clk_disable_unprepare(priv->clk);
close_candev(dev);
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 75e9233..b523e65 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -123,7 +123,9 @@
FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
/* FLEXCAN interrupt flag register (IFLAG) bits */
-#define FLEXCAN_TX_BUF_ID 8
+/* Errata ERR005829 step7: Reserve first valid MB */
+#define FLEXCAN_TX_BUF_RESERVED 8
+#define FLEXCAN_TX_BUF_ID 9
#define FLEXCAN_IFLAG_BUF(x) BIT(x)
#define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7)
#define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6)
@@ -134,6 +136,17 @@
/* FLEXCAN message buffers */
#define FLEXCAN_MB_CNT_CODE(x) (((x) & 0xf) << 24)
+#define FLEXCAN_MB_CODE_RX_INACTIVE (0x0 << 24)
+#define FLEXCAN_MB_CODE_RX_EMPTY (0x4 << 24)
+#define FLEXCAN_MB_CODE_RX_FULL (0x2 << 24)
+#define FLEXCAN_MB_CODE_RX_OVERRRUN (0x6 << 24)
+#define FLEXCAN_MB_CODE_RX_RANSWER (0xa << 24)
+
+#define FLEXCAN_MB_CODE_TX_INACTIVE (0x8 << 24)
+#define FLEXCAN_MB_CODE_TX_ABORT (0x9 << 24)
+#define FLEXCAN_MB_CODE_TX_DATA (0xc << 24)
+#define FLEXCAN_MB_CODE_TX_TANSWER (0xe << 24)
+
#define FLEXCAN_MB_CNT_SRR BIT(22)
#define FLEXCAN_MB_CNT_IDE BIT(21)
#define FLEXCAN_MB_CNT_RTR BIT(20)
@@ -306,6 +319,14 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
flexcan_write(can_id, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
flexcan_write(ctrl, ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
+ /* Errata ERR005829 step8:
+ * Write twice INACTIVE(0x8) code to first MB.
+ */
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+ ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+ ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+
return NETDEV_TX_OK;
}
@@ -612,6 +633,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) {
stats->tx_bytes += can_get_echo_skb(dev, 0);
stats->tx_packets++;
+ /* after sending a RTR frame mailbox is in RX mode */
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+ ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
flexcan_write((1 << FLEXCAN_TX_BUF_ID), ®s->iflag1);
netif_wake_queue(dev);
}
@@ -669,6 +693,7 @@ static int flexcan_chip_start(struct net_device *dev)
struct flexcan_regs __iomem *regs = priv->base;
int err;
u32 reg_mcr, reg_ctrl;
+ int i;
/* enable module */
flexcan_chip_enable(priv);
@@ -734,8 +759,18 @@ static int flexcan_chip_start(struct net_device *dev)
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
flexcan_write(reg_ctrl, ®s->ctrl);
- /* Abort any pending TX, mark Mailbox as INACTIVE */
- flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
+ /* clear and invalidate all mailboxes first */
+ for (i = FLEXCAN_TX_BUF_ID; i < ARRAY_SIZE(regs->cantxfg); i++) {
+ flexcan_write(FLEXCAN_MB_CODE_RX_INACTIVE,
+ ®s->cantxfg[i].can_ctrl);
+ }
+
+ /* Errata ERR005829: mark first TX mailbox as INACTIVE */
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+ ®s->cantxfg[FLEXCAN_TX_BUF_RESERVED].can_ctrl);
+
+ /* mark TX mailbox as INACTIVE */
+ flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
/* acceptance mask/acceptance code (accept everything) */
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 307611a..d8e4562 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -969,8 +969,6 @@ static irqreturn_t ixgbevf_msix_clean_tx(int irq, void *data)
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
for (i = 0; i < q_vector->txr_count; i++) {
tx_ring = &(adapter->tx_ring[r_idx]);
- tx_ring->total_bytes = 0;
- tx_ring->total_packets = 0;
ixgbevf_clean_tx_irq(adapter, tx_ring);
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
r_idx + 1);
@@ -994,16 +992,6 @@ static irqreturn_t ixgbevf_msix_clean_rx(int irq, void *data)
struct ixgbe_hw *hw = &adapter->hw;
struct ixgbevf_ring *rx_ring;
int r_idx;
- int i;
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rxr_count; i++) {
- rx_ring = &(adapter->rx_ring[r_idx]);
- rx_ring->total_bytes = 0;
- rx_ring->total_packets = 0;
- r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
- r_idx + 1);
- }
if (!q_vector->rxr_count)
return IRQ_HANDLED;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
index 1208b75..513baa0 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
@@ -1210,11 +1210,14 @@ static void rtl92c_dm_refresh_rate_adaptive_mask(struct ieee80211_hw *hw)
if (rtlhal->interface == INTF_PCI) {
rcu_read_lock();
sta = ieee80211_find_sta(mac->vif, mac->bssid);
+ if (!sta)
+ goto out_unlock;
}
rtlpriv->cfg->ops->update_rate_tbl(hw, sta,
p_ra->ratr_state);
p_ra->pre_ratr_state = p_ra->ratr_state;
+ out_unlock:
if (rtlhal->interface == INTF_PCI)
rcu_read_unlock();
}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 52a9c33..2c4cdce 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -306,6 +306,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
+ {RTL_USB_DEVICE(0x0df6, 0x0070, rtl92cu_hal_cfg)}, /*Sitecom - 150N */
{RTL_USB_DEVICE(0x0df6, 0x0077, rtl92cu_hal_cfg)}, /*Sitecom-WLA2100V2*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
{RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 82c3fd4..1243d2f 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -718,11 +718,21 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
return NULL;
}
+ if (data_size > ISCSI_DEF_MAX_RECV_SEG_LEN) {
+ iscsi_conn_printk(KERN_ERR, conn, "Invalid buffer len of %u for login task. Max len is %u\n", data_size, ISCSI_DEF_MAX_RECV_SEG_LEN);
+ return NULL;
+ }
+
task = conn->login_task;
} else {
if (session->state != ISCSI_STATE_LOGGED_IN)
return NULL;
+ if (data_size != 0) {
+ iscsi_conn_printk(KERN_ERR, conn, "Can not send data buffer of len %u for op 0x%x\n", data_size, opcode);
+ return NULL;
+ }
+
BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE);
BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED);
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index b3f0b0f..dcc39b6 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -916,6 +916,15 @@ int scsi_eh_get_sense(struct list_head *work_q,
SCSI_SENSE_VALID(scmd))
continue;
+ if (status_byte(scmd->result) != CHECK_CONDITION)
+ /*
+ * don't request sense if there's no check condition
+ * status because the error we're processing isn't one
+ * that has a sense code (and some devices get
+ * confused by sense requests out of the blue)
+ */
+ continue;
+
SCSI_LOG_ERROR_RECOVERY(2, scmd_printk(KERN_INFO, scmd,
"%s: requesting sense\n",
current->comm));
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index d7ac2c0..56d02e0 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4297,6 +4297,7 @@ static void iscsit_logout_post_handler_diffcid(
{
struct iscsi_conn *l_conn;
struct iscsi_session *sess = conn->sess;
+ bool conn_found = false;
if (!sess)
return;
@@ -4305,12 +4306,13 @@ static void iscsit_logout_post_handler_diffcid(
list_for_each_entry(l_conn, &sess->sess_conn_list, conn_list) {
if (l_conn->cid == cid) {
iscsit_inc_conn_usage_count(l_conn);
+ conn_found = true;
break;
}
}
spin_unlock_bh(&sess->conn_lock);
- if (!l_conn)
+ if (!conn_found)
return;
if (l_conn->sock)
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 8a8ff23..ed4abad 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -552,7 +552,7 @@ int iscsi_copy_param_list(
param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL);
if (!param_list) {
pr_err("Unable to allocate memory for struct iscsi_param_list.\n");
- goto err_out;
+ return -1;
}
INIT_LIST_HEAD(¶m_list->param_list);
INIT_LIST_HEAD(¶m_list->extra_response_list);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e0d4d90..62a9e44 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3729,9 +3729,10 @@ static void hub_events(void)
hub = list_entry(tmp, struct usb_hub, event_list);
kref_get(&hub->kref);
+ hdev = hub->hdev;
+ usb_get_dev(hdev);
spin_unlock_irq(&hub_event_lock);
- hdev = hub->hdev;
hub_dev = hub->intfdev;
intf = to_usb_interface(hub_dev);
dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
@@ -3946,6 +3947,7 @@ static void hub_events(void)
usb_autopm_put_interface(intf);
loop_disconnected:
usb_unlock_device(hdev);
+ usb_put_dev(hdev);
kref_put(&hub->kref, hub_release);
} /* end while (1) */
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 99b58d84..6da4435 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -563,9 +563,6 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
dwc3_debugfs_exit(dwc);
switch (dwc->mode) {
@@ -586,6 +583,9 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
dwc3_core_exit(dwc);
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a94eabd..56ec28b 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -463,7 +463,8 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
}
/* Updates Link Status for super Speed port */
-static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+static void xhci_hub_report_link_state(struct xhci_hcd *xhci,
+ u32 *status, u32 status_reg)
{
u32 pls = status_reg & PORT_PLS_MASK;
@@ -502,7 +503,8 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
* in which sometimes the port enters compliance mode
* caused by a delay on the host-device negotiation.
*/
- if (pls == USB_SS_PORT_LS_COMP_MOD)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (pls == USB_SS_PORT_LS_COMP_MOD))
pls |= USB_PORT_STAT_CONNECTION;
}
@@ -680,7 +682,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
}
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- xhci_hub_report_link_state(&status, temp);
+ xhci_hub_report_link_state(xhci, &status, temp);
/*
* Verify if all USB3 Ports Have entered U0 already.
* Delete Compliance Mode Timer if so.
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 1976858..aa38b1f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1813,7 +1813,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
- for (i = 0; i < num_ports; i++) {
+ for (i = 0; i < num_ports && xhci->rh_bw; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
struct list_head *ep = &bwt->interval_bw[j].endpoints;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 121a052..8425e9e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -750,6 +750,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
@@ -959,6 +960,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
/* ekey Devices */
{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
+ /* GE Healthcare devices */
+ { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 0eb2e97..7628b91 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -828,6 +828,12 @@
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
/*
+ * NOVITUS printers
+ */
+#define NOVITUS_VID 0x1a28
+#define NOVITUS_BONO_E_PID 0x6010
+
+/*
* RT Systems programming cables for various ham radios
*/
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
@@ -1376,3 +1382,9 @@
* ekey biometric systems GmbH (http://ekey.net/)
*/
#define FTDI_EKEY_CONV_USB_PID 0xCB08 /* Converter USB */
+
+/*
+ * GE Healthcare devices
+ */
+#define GE_HEALTHCARE_VID 0x1901
+#define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index bd79d68..e3ddec0 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -296,14 +296,19 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1199, 0x68A2), /* Sierra Wireless MC77xx in QMI mode */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
- { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
+ /* Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
- { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
+ /* Airprime/Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1d9fc30..a280945 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -93,6 +93,12 @@ UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001,
"PhotoSmart R707",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
+UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999,
+ "Adaptec",
+ "USBConnect 2000",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Sebastian Kapfer <[email protected]>
* and Olaf Hering <[email protected]> (different bcd's, same vendor/product)
* for USB floppies that need the SINGLE_LUN enforcement.
@@ -733,6 +739,12 @@ UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
+UNUSUAL_DEV( 0x059b, 0x0040, 0x0100, 0x0100,
+ "Iomega",
+ "Jaz USB Adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
/* Reported by <[email protected]> */
UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
"LaCie",
@@ -1105,6 +1117,18 @@ UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE),
+UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB-SCSI (Mac USB Dock)",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Submitted by Jan De Luyck <[email protected]> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
@@ -1925,6 +1949,14 @@ UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+ * and Mac USB Dock USB-SCSI */
+UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133,
+ "Entrega Technologies",
+ "USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Robert Schedel <[email protected]>
* Note: this is a 'super top' device like the above 14cd/6600 device */
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
@@ -1940,6 +1972,12 @@ UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999,
+ "Ariston Technologies",
+ "iConnect USB to SCSI adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Hans de Goede <[email protected]>
* These Appotech controllers are found in Picture Frames, they provide a
* (buggy) emulation of a cdrom drive which contains the windows software
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
index 5241f1d..3c9e929 100644
--- a/drivers/uwb/lc-dev.c
+++ b/drivers/uwb/lc-dev.c
@@ -441,16 +441,19 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
uwb_dev->mac_addr = *bce->mac_addr;
uwb_dev->dev_addr = bce->dev_addr;
dev_set_name(&uwb_dev->dev, macbuf);
+
+ /* plug the beacon cache */
+ bce->uwb_dev = uwb_dev;
+ uwb_dev->bce = bce;
+ uwb_bce_get(bce); /* released in uwb_dev_sys_release() */
+
result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc);
if (result < 0) {
dev_err(dev, "new device %s: cannot instantiate device\n",
macbuf);
goto error_dev_add;
}
- /* plug the beacon cache */
- bce->uwb_dev = uwb_dev;
- uwb_dev->bce = bce;
- uwb_bce_get(bce); /* released in uwb_dev_sys_release() */
+
dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n",
macbuf, devbuf, rc->uwb_dev.dev.parent->bus->name,
dev_name(rc->uwb_dev.dev.parent));
@@ -458,6 +461,8 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
return;
error_dev_add:
+ bce->uwb_dev = NULL;
+ uwb_bce_put(bce);
kfree(uwb_dev);
return;
}
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 412b96c..8da1ed1 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -109,16 +109,11 @@ static void do_suspend(void)
shutting_down = SHUTDOWN_SUSPEND;
-#ifdef CONFIG_PREEMPT
- /* If the kernel is preemptible, we need to freeze all the processes
- to prevent them from being in the middle of a pagetable update
- during suspend. */
err = freeze_processes();
if (err) {
printk(KERN_ERR "xen suspend: freeze failed %d\n", err);
goto out;
}
-#endif
err = dpm_suspend_start(PMSG_FREEZE);
if (err) {
@@ -170,10 +165,8 @@ out_resume:
clock_was_set();
out_thaw:
-#ifdef CONFIG_PREEMPT
thaw_processes();
out:
-#endif
shutting_down = SHUTDOWN_INVALID;
}
#endif /* CONFIG_HIBERNATE_CALLBACKS */
diff --git a/fs/buffer.c b/fs/buffer.c
index 9bf31ac..f235e18 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -971,7 +971,8 @@ grow_dev_page(struct block_device *bdev, sector_t block,
bh = page_buffers(page);
if (bh->b_size == size) {
end_block = init_page_buffers(page, bdev,
- index << sizebits, size);
+ (sector_t)index << sizebits,
+ size);
goto done;
}
if (!try_to_free_buffers(page))
@@ -992,7 +993,8 @@ grow_dev_page(struct block_device *bdev, sector_t block,
*/
spin_lock(&inode->i_mapping->private_lock);
link_dev_buffers(page, bh);
- end_block = init_page_buffers(page, bdev, index << sizebits, size);
+ end_block = init_page_buffers(page, bdev, (sector_t)index << sizebits,
+ size);
spin_unlock(&inode->i_mapping->private_lock);
done:
ret = (block < end_block) ? 1 : -ENXIO;
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 2922486..521ba9d 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1674,7 +1674,7 @@ ext4_group_first_block_no(struct super_block *sb, ext4_group_t group_no)
/*
* Special error return code only used by dx_probe() and its callers.
*/
-#define ERR_BAD_DX_DIR -75000
+#define ERR_BAD_DX_DIR (-(MAX_ERRNO - 1))
void ext4_get_group_no_and_offset(struct super_block *sb, ext4_fsblk_t blocknr,
ext4_group_t *blockgrpp, ext4_grpblk_t *offsetp);
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 54ad9a5..665e55c 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -861,7 +861,7 @@ static struct buffer_head * ext4_find_entry (struct inode *dir,
buffer */
int num = 0;
ext4_lblk_t nblocks;
- int i, err;
+ int i, err = 0;
int namelen;
*res_dir = NULL;
@@ -886,7 +886,11 @@ static struct buffer_head * ext4_find_entry (struct inode *dir,
* return. Otherwise, fall back to doing a search the
* old fashioned way.
*/
- if (bh || (err != ERR_BAD_DX_DIR))
+ if (err == -ENOENT)
+ return NULL;
+ if (err && err != ERR_BAD_DX_DIR)
+ return ERR_PTR(err);
+ if (bh)
return bh;
dxtrace(printk(KERN_DEBUG "ext4_find_entry: dx failed, "
"falling back\n"));
@@ -917,6 +921,11 @@ restart:
}
num++;
bh = ext4_getblk(NULL, dir, b++, 0, &err);
+ if (unlikely(err)) {
+ if (ra_max == 0)
+ return ERR_PTR(err);
+ break;
+ }
bh_use[ra_max] = bh;
if (bh)
ll_rw_block(READ | REQ_META | REQ_PRIO,
@@ -1026,6 +1035,8 @@ static struct dentry *ext4_lookup(struct inode *dir, struct dentry *dentry, stru
return ERR_PTR(-ENAMETOOLONG);
bh = ext4_find_entry(dir, &dentry->d_name, &de);
+ if (IS_ERR(bh))
+ return (struct dentry *) bh;
inode = NULL;
if (bh) {
__u32 ino = le32_to_cpu(de->inode);
@@ -1063,6 +1074,8 @@ struct dentry *ext4_get_parent(struct dentry *child)
struct buffer_head *bh;
bh = ext4_find_entry(child->d_inode, &dotdot, &de);
+ if (IS_ERR(bh))
+ return (struct dentry *) bh;
if (!bh)
return ERR_PTR(-ENOENT);
ino = le32_to_cpu(de->inode);
@@ -2137,6 +2150,8 @@ static int ext4_rmdir(struct inode *dir, struct dentry *dentry)
retval = -ENOENT;
bh = ext4_find_entry(dir, &dentry->d_name, &de);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (!bh)
goto end_rmdir;
@@ -2202,6 +2217,8 @@ static int ext4_unlink(struct inode *dir, struct dentry *dentry)
retval = -ENOENT;
bh = ext4_find_entry(dir, &dentry->d_name, &de);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (!bh)
goto end_unlink;
@@ -2418,6 +2435,8 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
ext4_handle_sync(handle);
old_bh = ext4_find_entry(old_dir, &old_dentry->d_name, &old_de);
+ if (IS_ERR(old_bh))
+ return PTR_ERR(old_bh);
/*
* Check for inode number is _not_ due to possible IO errors.
* We might rmdir the source, keep it as pwd of some process
@@ -2431,6 +2450,11 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
new_inode = new_dentry->d_inode;
new_bh = ext4_find_entry(new_dir, &new_dentry->d_name, &new_de);
+ if (IS_ERR(new_bh)) {
+ retval = PTR_ERR(new_bh);
+ new_bh = NULL;
+ goto end_rename;
+ }
if (new_bh) {
if (!new_inode) {
brelse(new_bh);
@@ -2509,7 +2533,9 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
struct ext4_dir_entry_2 *old_de2;
old_bh2 = ext4_find_entry(old_dir, &old_dentry->d_name, &old_de2);
- if (old_bh2) {
+ if (IS_ERR(old_bh2)) {
+ retval = PTR_ERR(old_bh2);
+ } else if (old_bh2) {
retval = ext4_delete_entry(handle, old_dir,
old_de2, old_bh2);
brelse(old_bh2);
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 50992c3..a43e43c 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -528,6 +528,7 @@ handle_bb:
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
+ bh = NULL;
goto out;
}
if (ext4_bg_has_super(sb, group)) {
@@ -556,6 +557,7 @@ handle_ib:
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
+ bh = NULL;
goto out;
}
diff --git a/fs/namei.c b/fs/namei.c
index c427919..5974fb5 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -553,24 +553,22 @@ static int complete_walk(struct nameidata *nd)
static __always_inline void set_root(struct nameidata *nd)
{
- if (!nd->root.mnt)
- get_fs_root(current->fs, &nd->root);
+ get_fs_root(current->fs, &nd->root);
}
static int link_path_walk(const char *, struct nameidata *);
-static __always_inline void set_root_rcu(struct nameidata *nd)
+static __always_inline unsigned set_root_rcu(struct nameidata *nd)
{
- if (!nd->root.mnt) {
- struct fs_struct *fs = current->fs;
- unsigned seq;
+ struct fs_struct *fs = current->fs;
+ unsigned seq, res;
- do {
- seq = read_seqcount_begin(&fs->seq);
- nd->root = fs->root;
- nd->seq = __read_seqcount_begin(&nd->root.dentry->d_seq);
- } while (read_seqcount_retry(&fs->seq, seq));
- }
+ do {
+ seq = read_seqcount_begin(&fs->seq);
+ nd->root = fs->root;
+ res = __read_seqcount_begin(&nd->root.dentry->d_seq);
+ } while (read_seqcount_retry(&fs->seq, seq));
+ return res;
}
static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *link)
@@ -928,7 +926,8 @@ static void follow_mount_rcu(struct nameidata *nd)
static int follow_dotdot_rcu(struct nameidata *nd)
{
- set_root_rcu(nd);
+ if (!nd->root.mnt)
+ set_root_rcu(nd);
while (1) {
if (nd->path.dentry == nd->root.dentry &&
@@ -1031,7 +1030,8 @@ static void follow_mount(struct path *path)
static void follow_dotdot(struct nameidata *nd)
{
- set_root(nd);
+ if (!nd->root.mnt)
+ set_root(nd);
while(1) {
struct dentry *old = nd->path.dentry;
@@ -1633,7 +1633,7 @@ static int path_init(int dfd, const char *name, unsigned int flags,
if (flags & LOOKUP_RCU) {
br_read_lock(vfsmount_lock);
rcu_read_lock();
- set_root_rcu(nd);
+ nd->seq = set_root_rcu(nd);
} else {
set_root(nd);
path_get(&nd->root);
diff --git a/fs/namespace.c b/fs/namespace.c
index 4e46539..f0f2e06 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1066,6 +1066,9 @@ void umount_tree(struct mount *mnt, int propagate, struct list_head *kill)
for (p = mnt; p; p = next_mnt(p, mnt))
list_move(&p->mnt_hash, &tmp_list);
+ list_for_each_entry(p, &tmp_list, mnt_hash)
+ list_del_init(&p->mnt_child);
+
if (propagate)
propagate_umount(&tmp_list);
@@ -1076,7 +1079,6 @@ void umount_tree(struct mount *mnt, int propagate, struct list_head *kill)
if (p->mnt_ns)
__mnt_make_shortterm(p);
p->mnt_ns = NULL;
- list_del_init(&p->mnt_child);
if (mnt_has_parent(p)) {
p->mnt_parent->mnt_ghosts++;
dentry_reset_mounted(p->mnt_mountpoint);
@@ -1679,7 +1681,7 @@ static int do_remount(struct path *path, int flags, int mnt_flags,
err = do_remount_sb(sb, flags, data, 0);
if (!err) {
br_write_lock(vfsmount_lock);
- mnt_flags |= mnt->mnt.mnt_flags & MNT_PROPAGATION_MASK;
+ mnt_flags |= mnt->mnt.mnt_flags & ~MNT_USER_SETTABLE_MASK;
mnt->mnt.mnt_flags = mnt_flags;
br_write_unlock(vfsmount_lock);
}
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 01afcd5..527a4fc 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2063,23 +2063,23 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data)
is_rdwr = test_bit(NFS_O_RDWR_STATE, &state->flags);
is_rdonly = test_bit(NFS_O_RDONLY_STATE, &state->flags);
is_wronly = test_bit(NFS_O_WRONLY_STATE, &state->flags);
- /* Calculate the current open share mode */
- calldata->arg.fmode = 0;
- if (is_rdonly || is_rdwr)
- calldata->arg.fmode |= FMODE_READ;
- if (is_wronly || is_rdwr)
- calldata->arg.fmode |= FMODE_WRITE;
/* Calculate the change in open mode */
+ calldata->arg.fmode = 0;
if (state->n_rdwr == 0) {
- if (state->n_rdonly == 0) {
- call_close |= is_rdonly || is_rdwr;
- calldata->arg.fmode &= ~FMODE_READ;
- }
- if (state->n_wronly == 0) {
- call_close |= is_wronly || is_rdwr;
- calldata->arg.fmode &= ~FMODE_WRITE;
- }
- }
+ if (state->n_rdonly == 0)
+ call_close |= is_rdonly;
+ else if (is_rdonly)
+ calldata->arg.fmode |= FMODE_READ;
+ if (state->n_wronly == 0)
+ call_close |= is_wronly;
+ else if (is_wronly)
+ calldata->arg.fmode |= FMODE_WRITE;
+ } else if (is_rdwr)
+ calldata->arg.fmode |= FMODE_READ|FMODE_WRITE;
+
+ if (calldata->arg.fmode == 0)
+ call_close |= is_rdwr;
+
spin_unlock(&state->owner->so_lock);
if (!call_close) {
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index e3abfde..36620e6 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -508,6 +508,9 @@ set_nfsv4_acl_one(struct dentry *dentry, struct posix_acl *pacl, char *key)
char *buf = NULL;
int error = 0;
+ if (!pacl)
+ return vfs_setxattr(dentry, key, NULL, 0, 0);
+
buflen = posix_acl_xattr_size(pacl->a_count);
buf = kmalloc(buflen, GFP_KERNEL);
error = -ENOMEM;
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index aa526be..204bfcf 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -24,6 +24,7 @@
#include <linux/buffer_head.h>
#include <linux/gfp.h>
#include <linux/mpage.h>
+#include <linux/pagemap.h>
#include <linux/writeback.h>
#include <linux/uio.h>
#include "nilfs.h"
@@ -195,10 +196,10 @@ static int nilfs_writepage(struct page *page, struct writeback_control *wbc)
static int nilfs_set_page_dirty(struct page *page)
{
+ struct inode *inode = page->mapping->host;
int ret = __set_page_dirty_nobuffers(page);
if (page_has_buffers(page)) {
- struct inode *inode = page->mapping->host;
unsigned nr_dirty = 0;
struct buffer_head *bh, *head;
@@ -221,6 +222,10 @@ static int nilfs_set_page_dirty(struct page *page)
if (nr_dirty)
nilfs_set_file_dirty(inode, nr_dirty);
+ } else if (ret) {
+ unsigned nr_dirty = 1 << (PAGE_CACHE_SHIFT - inode->i_blkbits);
+
+ nilfs_set_file_dirty(inode, nr_dirty);
}
return ret;
}
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 005261c..dbc372e 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -653,12 +653,9 @@ void dlm_lockres_clear_refmap_bit(struct dlm_ctxt *dlm,
clear_bit(bit, res->refmap);
}
-
-void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
+static void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
- assert_spin_locked(&res->spinlock);
-
res->inflight_locks++;
mlog(0, "%s: res %.*s, inflight++: now %u, %ps()\n", dlm->name,
@@ -666,6 +663,13 @@ void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
__builtin_return_address(0));
}
+void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
+ struct dlm_lock_resource *res)
+{
+ assert_spin_locked(&res->spinlock);
+ __dlm_lockres_grab_inflight_ref(dlm, res);
+}
+
void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
@@ -855,10 +859,8 @@ lookup:
/* finally add the lockres to its hash bucket */
__dlm_insert_lockres(dlm, res);
- /* Grab inflight ref to pin the resource */
- spin_lock(&res->spinlock);
- dlm_lockres_grab_inflight_ref(dlm, res);
- spin_unlock(&res->spinlock);
+ /* since this lockres is new it doesn't not require the spinlock */
+ __dlm_lockres_grab_inflight_ref(dlm, res);
/* get an extra ref on the mle in case this is a BLOCK
* if so, the creator of the BLOCK may try to put the last
diff --git a/fs/pnode.c b/fs/pnode.c
index ab5fa9e..f61dcb4 100644
--- a/fs/pnode.c
+++ b/fs/pnode.c
@@ -333,8 +333,10 @@ static void __propagate_umount(struct mount *mnt)
* umount the child only if the child has no
* other children
*/
- if (child && list_empty(&child->mnt_mounts))
+ if (child && list_empty(&child->mnt_mounts)) {
+ list_del_init(&child->mnt_child);
list_move_tail(&child->mnt_hash, &mnt->mnt_hash);
+ }
}
}
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 668f66b..bb48be7 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -74,12 +74,12 @@ extern int cpuset_slab_spread_node(void);
static inline int cpuset_do_page_mem_spread(void)
{
- return current->flags & PF_SPREAD_PAGE;
+ return task_spread_page(current);
}
static inline int cpuset_do_slab_mem_spread(void)
{
- return current->flags & PF_SPREAD_SLAB;
+ return task_spread_slab(current);
}
extern int current_cpuset_is_being_rebound(void);
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index f5df3dc..f4e8578 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -259,23 +259,11 @@ extern unsigned long preset_lpj;
#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
#endif
#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
-#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
TICK_NSEC -1) / (u64)TICK_NSEC))
#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
TICK_NSEC -1) / (u64)TICK_NSEC))
-#define USEC_CONVERSION \
- ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
- TICK_NSEC -1) / (u64)TICK_NSEC))
-/*
- * USEC_ROUND is used in the timeval to jiffie conversion. See there
- * for more details. It is the scaled resolution rounding value. Note
- * that it is a 64-bit value. Since, when it is applied, we are already
- * in jiffies (albit scaled), it is nothing but the bits we will shift
- * off.
- */
-#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
/*
* The maximum jiffie value is (MAX_INT >> 1). Here we translate that
* into seconds. The 64-bit case will overflow if we are not careful,
diff --git a/include/linux/mount.h b/include/linux/mount.h
index d7029f4..2044aac 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -42,7 +42,9 @@ struct mnt_namespace;
* flag, consider how it interacts with shared mounts.
*/
#define MNT_SHARED_MASK (MNT_UNBINDABLE)
-#define MNT_PROPAGATION_MASK (MNT_SHARED | MNT_UNBINDABLE)
+#define MNT_USER_SETTABLE_MASK (MNT_NOSUID | MNT_NODEV | MNT_NOEXEC \
+ | MNT_NOATIME | MNT_NODIRATIME | MNT_RELATIME \
+ | MNT_READONLY)
#define MNT_INTERNAL 0x4000
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8cd5cb8..56d8233 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1359,6 +1359,7 @@ struct task_struct {
/* IRQ handler threads */
unsigned irq_thread:1;
#endif
+ unsigned long atomic_flags; /* Flags needing atomic access. */
pid_t pid;
pid_t tgid;
@@ -1833,8 +1834,6 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *
#define PF_KTHREAD 0x00200000 /* I am a kernel thread */
#define PF_RANDOMIZE 0x00400000 /* randomize virtual address space */
#define PF_SWAPWRITE 0x00800000 /* Allowed to write to swap */
-#define PF_SPREAD_PAGE 0x01000000 /* Spread page cache over cpuset */
-#define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */
#define PF_THREAD_BOUND 0x04000000 /* Thread bound to specific cpu */
#define PF_MCE_EARLY 0x08000000 /* Early kill for mce process policy */
#define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */
@@ -1866,6 +1865,20 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *
#define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
#define used_math() tsk_used_math(current)
+/* Per-process atomic flags. */
+#define PFA_SPREAD_PAGE 1 /* Spread page cache over cpuset */
+#define PFA_SPREAD_SLAB 2 /* Spread some slab caches over cpuset */
+
+#define TASK_PFA_TEST(name, func) \
+ static inline bool task_##func(struct task_struct *p) \
+ { return test_bit(PFA_##name, &p->atomic_flags); }
+#define TASK_PFA_SET(name, func) \
+ static inline void task_set_##func(struct task_struct *p) \
+ { set_bit(PFA_##name, &p->atomic_flags); }
+#define TASK_PFA_CLEAR(name, func) \
+ static inline void task_clear_##func(struct task_struct *p) \
+ { clear_bit(PFA_##name, &p->atomic_flags); }
+
/*
* task->jobctl flags
*/
@@ -1957,6 +1970,14 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
}
#endif
+TASK_PFA_TEST(SPREAD_PAGE, spread_page)
+TASK_PFA_SET(SPREAD_PAGE, spread_page)
+TASK_PFA_CLEAR(SPREAD_PAGE, spread_page)
+
+TASK_PFA_TEST(SPREAD_SLAB, spread_slab)
+TASK_PFA_SET(SPREAD_SLAB, spread_slab)
+TASK_PFA_CLEAR(SPREAD_SLAB, spread_slab)
+
/*
* Do not use outside of architecture code which knows its limitations.
*
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index a5f7993..8d64abf 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -97,7 +97,7 @@ struct ieee80211_reg_rule {
struct ieee80211_regdomain {
u32 n_reg_rules;
- char alpha2[2];
+ char alpha2[3];
u8 dfs_region;
struct ieee80211_reg_rule reg_rules[];
};
diff --git a/init/Kconfig b/init/Kconfig
index 6cfd71d..f1b0e78 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -560,6 +560,7 @@ config LOG_BUF_SHIFT
int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
range 12 21
default 17
+ depends on PRINTK
help
Select kernel log buffer size as a power of 2.
Examples:
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 7c8f4f7..c776f89 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -3838,6 +3838,11 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
{
struct cgroup *c_parent = dentry->d_parent->d_fsdata;
+ /* Do not accept '\n' to prevent making /proc/<pid>/cgroup unparsable.
+ */
+ if (strchr(dentry->d_name.name, '\n'))
+ return -EINVAL;
+
/* the vfs holds inode->i_mutex already */
return cgroup_create(c_parent, dentry, mode | S_IFDIR);
}
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 9cb82b9..7f3bde5 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -326,13 +326,14 @@ static void cpuset_update_task_spread_flag(struct cpuset *cs,
struct task_struct *tsk)
{
if (is_spread_page(cs))
- tsk->flags |= PF_SPREAD_PAGE;
+ task_set_spread_page(tsk);
else
- tsk->flags &= ~PF_SPREAD_PAGE;
+ task_clear_spread_page(tsk);
+
if (is_spread_slab(cs))
- tsk->flags |= PF_SPREAD_SLAB;
+ task_set_spread_slab(tsk);
else
- tsk->flags &= ~PF_SPREAD_SLAB;
+ task_clear_spread_slab(tsk);
}
/*
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 685ce46..0466297 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -36,6 +36,7 @@
#include <linux/perf_event.h>
#include <linux/ftrace_event.h>
#include <linux/hw_breakpoint.h>
+#include <linux/compat.h>
#include "internal.h"
@@ -1702,6 +1703,16 @@ retry:
*/
if (ctx->is_active) {
raw_spin_unlock_irq(&ctx->lock);
+ /*
+ * Reload the task pointer, it might have been changed by
+ * a concurrent perf_event_context_sched_out().
+ */
+ task = ctx->task;
+ /*
+ * Reload the task pointer, it might have been changed by
+ * a concurrent perf_event_context_sched_out().
+ */
+ task = ctx->task;
goto retry;
}
@@ -3350,6 +3361,25 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return 0;
}
+#ifdef CONFIG_COMPAT
+static long perf_compat_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ switch (_IOC_NR(cmd)) {
+ case _IOC_NR(PERF_EVENT_IOC_SET_FILTER):
+ /* Fix up pointer size (usually 4 -> 8 in 32-on-64-bit case */
+ if (_IOC_SIZE(cmd) == sizeof(compat_uptr_t)) {
+ cmd &= ~IOCSIZE_MASK;
+ cmd |= sizeof(void *) << IOCSIZE_SHIFT;
+ }
+ break;
+ }
+ return perf_ioctl(file, cmd, arg);
+}
+#else
+# define perf_compat_ioctl NULL
+#endif
+
int perf_event_task_enable(void)
{
struct perf_event *event;
@@ -3821,7 +3851,7 @@ static const struct file_operations perf_fops = {
.read = perf_read,
.poll = perf_poll,
.unlocked_ioctl = perf_ioctl,
- .compat_ioctl = perf_ioctl,
+ .compat_ioctl = perf_compat_ioctl,
.mmap = perf_mmap,
.fasync = perf_fasync,
};
@@ -7117,8 +7147,10 @@ int perf_event_init_task(struct task_struct *child)
for_each_task_context_nr(ctxn) {
ret = perf_event_init_context(child, ctxn);
- if (ret)
+ if (ret) {
+ perf_event_free_task(child);
return ret;
+ }
}
return 0;
diff --git a/kernel/fork.c b/kernel/fork.c
index 621c547..878dcb2 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1285,7 +1285,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
goto bad_fork_cleanup_policy;
retval = audit_alloc(p);
if (retval)
- goto bad_fork_cleanup_policy;
+ goto bad_fork_cleanup_perf;
/* copy all the process information */
retval = copy_semundo(clone_flags, p);
if (retval)
@@ -1480,8 +1480,9 @@ bad_fork_cleanup_semundo:
exit_sem(p);
bad_fork_cleanup_audit:
audit_free(p);
-bad_fork_cleanup_policy:
+bad_fork_cleanup_perf:
perf_event_free_task(p);
+bad_fork_cleanup_policy:
#ifdef CONFIG_NUMA
mpol_put(p->mempolicy);
bad_fork_cleanup_cgroup:
diff --git a/kernel/futex.c b/kernel/futex.c
index 9396b7b..41dfb18 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -2460,6 +2460,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags,
* shared futexes. We need to compare the keys:
*/
if (match_futex(&q.key, &key2)) {
+ queue_unlock(&q, hb);
ret = -EINVAL;
goto out_put_keys;
}
diff --git a/kernel/time.c b/kernel/time.c
index ba744cf..a095290 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -487,17 +487,20 @@ EXPORT_SYMBOL(usecs_to_jiffies);
* that a remainder subtract here would not do the right thing as the
* resolution values don't fall on second boundries. I.e. the line:
* nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
+ * Note that due to the small error in the multiplier here, this
+ * rounding is incorrect for sufficiently large values of tv_nsec, but
+ * well formed timespecs should have tv_nsec < NSEC_PER_SEC, so we're
+ * OK.
*
* Rather, we just shift the bits off the right.
*
* The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
* value to a scaled second value.
*/
-unsigned long
-timespec_to_jiffies(const struct timespec *value)
+static unsigned long
+__timespec_to_jiffies(unsigned long sec, long nsec)
{
- unsigned long sec = value->tv_sec;
- long nsec = value->tv_nsec + TICK_NSEC - 1;
+ nsec = nsec + TICK_NSEC - 1;
if (sec >= MAX_SEC_IN_JIFFIES){
sec = MAX_SEC_IN_JIFFIES;
@@ -508,6 +511,13 @@ timespec_to_jiffies(const struct timespec *value)
(NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
}
+
+unsigned long
+timespec_to_jiffies(const struct timespec *value)
+{
+ return __timespec_to_jiffies(value->tv_sec, value->tv_nsec);
+}
+
EXPORT_SYMBOL(timespec_to_jiffies);
void
@@ -524,31 +534,27 @@ jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
}
EXPORT_SYMBOL(jiffies_to_timespec);
-/* Same for "timeval"
+/*
+ * We could use a similar algorithm to timespec_to_jiffies (with a
+ * different multiplier for usec instead of nsec). But this has a
+ * problem with rounding: we can't exactly add TICK_NSEC - 1 to the
+ * usec value, since it's not necessarily integral.
*
- * Well, almost. The problem here is that the real system resolution is
- * in nanoseconds and the value being converted is in micro seconds.
- * Also for some machines (those that use HZ = 1024, in-particular),
- * there is a LARGE error in the tick size in microseconds.
-
- * The solution we use is to do the rounding AFTER we convert the
- * microsecond part. Thus the USEC_ROUND, the bits to be shifted off.
- * Instruction wise, this should cost only an additional add with carry
- * instruction above the way it was done above.
+ * We could instead round in the intermediate scaled representation
+ * (i.e. in units of 1/2^(large scale) jiffies) but that's also
+ * perilous: the scaling introduces a small positive error, which
+ * combined with a division-rounding-upward (i.e. adding 2^(scale) - 1
+ * units to the intermediate before shifting) leads to accidental
+ * overflow and overestimates.
+ *
+ * At the cost of one additional multiplication by a constant, just
+ * use the timespec implementation.
*/
unsigned long
timeval_to_jiffies(const struct timeval *value)
{
- unsigned long sec = value->tv_sec;
- long usec = value->tv_usec;
-
- if (sec >= MAX_SEC_IN_JIFFIES){
- sec = MAX_SEC_IN_JIFFIES;
- usec = 0;
- }
- return (((u64)sec * SEC_CONVERSION) +
- (((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
- (USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+ return __timespec_to_jiffies(value->tv_sec,
+ value->tv_usec * NSEC_PER_USEC);
}
EXPORT_SYMBOL(timeval_to_jiffies);
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index b704579..3ce9262 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -232,6 +232,12 @@ static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer)
}
+ktime_t alarm_expires_remaining(const struct alarm *alarm)
+{
+ struct alarm_base *base = &alarm_bases[alarm->type];
+ return ktime_sub(alarm->node.expires, base->gettime());
+}
+
#ifdef CONFIG_RTC_CLASS
/**
* alarmtimer_suspend - Suspend time callback
@@ -448,18 +454,26 @@ static enum alarmtimer_type clock2alarm(clockid_t clockid)
static enum alarmtimer_restart alarm_handle_timer(struct alarm *alarm,
ktime_t now)
{
+ unsigned long flags;
struct k_itimer *ptr = container_of(alarm, struct k_itimer,
it.alarm.alarmtimer);
- if (posix_timer_event(ptr, 0) != 0)
- ptr->it_overrun++;
+ enum alarmtimer_restart result = ALARMTIMER_NORESTART;
+
+ spin_lock_irqsave(&ptr->it_lock, flags);
+ if ((ptr->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE) {
+ if (posix_timer_event(ptr, 0) != 0)
+ ptr->it_overrun++;
+ }
/* Re-add periodic timers */
if (ptr->it.alarm.interval.tv64) {
ptr->it_overrun += alarm_forward(alarm, now,
ptr->it.alarm.interval);
- return ALARMTIMER_RESTART;
+ result = ALARMTIMER_RESTART;
}
- return ALARMTIMER_NORESTART;
+ spin_unlock_irqrestore(&ptr->it_lock, flags);
+
+ return result;
}
/**
@@ -525,18 +539,22 @@ static int alarm_timer_create(struct k_itimer *new_timer)
* @new_timer: k_itimer pointer
* @cur_setting: itimerspec data to fill
*
- * Copies the itimerspec data out from the k_itimer
+ * Copies out the current itimerspec data
*/
static void alarm_timer_get(struct k_itimer *timr,
struct itimerspec *cur_setting)
{
- memset(cur_setting, 0, sizeof(struct itimerspec));
+ ktime_t relative_expiry_time =
+ alarm_expires_remaining(&(timr->it.alarm.alarmtimer));
+
+ if (ktime_to_ns(relative_expiry_time) > 0) {
+ cur_setting->it_value = ktime_to_timespec(relative_expiry_time);
+ } else {
+ cur_setting->it_value.tv_sec = 0;
+ cur_setting->it_value.tv_nsec = 0;
+ }
- cur_setting->it_interval =
- ktime_to_timespec(timr->it.alarm.interval);
- cur_setting->it_value =
- ktime_to_timespec(timr->it.alarm.alarmtimer.node.expires);
- return;
+ cur_setting->it_interval = ktime_to_timespec(timr->it.alarm.interval);
}
/**
diff --git a/mm/migrate.c b/mm/migrate.c
index 5f588b1..98b998f 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -139,8 +139,11 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma,
get_page(new);
pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
+
+ /* Recheck VMA as permissions can change since migration started */
if (is_write_migration_entry(entry))
- pte = pte_mkwrite(pte);
+ pte = maybe_mkwrite(pte, vma);
+
#ifdef CONFIG_HUGETLB_PAGE
if (PageHuge(new))
pte = pte_mkhuge(pte);
diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c
index 405d331..6f3db37 100644
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -108,7 +108,7 @@ static int pcpu_alloc_pages(struct pcpu_chunk *chunk,
int page_start, int page_end)
{
const gfp_t gfp = GFP_KERNEL | __GFP_HIGHMEM | __GFP_COLD;
- unsigned int cpu;
+ unsigned int cpu, tcpu;
int i;
for_each_possible_cpu(cpu) {
@@ -116,14 +116,23 @@ static int pcpu_alloc_pages(struct pcpu_chunk *chunk,
struct page **pagep = &pages[pcpu_page_idx(cpu, i)];
*pagep = alloc_pages_node(cpu_to_node(cpu), gfp, 0);
- if (!*pagep) {
- pcpu_free_pages(chunk, pages, populated,
- page_start, page_end);
- return -ENOMEM;
- }
+ if (!*pagep)
+ goto err;
}
}
return 0;
+
+err:
+ while (--i >= page_start)
+ __free_page(pages[pcpu_page_idx(cpu, i)]);
+
+ for_each_possible_cpu(tcpu) {
+ if (tcpu == cpu)
+ break;
+ for (i = page_start; i < page_end; i++)
+ __free_page(pages[pcpu_page_idx(tcpu, i)]);
+ }
+ return -ENOMEM;
}
/**
@@ -263,6 +272,7 @@ err:
__pcpu_unmap_pages(pcpu_chunk_addr(chunk, tcpu, page_start),
page_end - page_start);
}
+ pcpu_post_unmap_tlb_flush(chunk, page_start, page_end);
return err;
}
diff --git a/mm/percpu.c b/mm/percpu.c
index 13b2eef..5f6042b 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1907,6 +1907,8 @@ void __init setup_per_cpu_areas(void)
if (pcpu_setup_first_chunk(ai, fc) < 0)
panic("Failed to initialize percpu areas.");
+
+ pcpu_free_alloc_info(ai);
}
#endif /* CONFIG_SMP */
diff --git a/mm/shmem.c b/mm/shmem.c
index 4bb5a80..0b77082 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1725,8 +1725,10 @@ static int shmem_rename(struct inode *old_dir, struct dentry *old_dentry, struct
if (new_dentry->d_inode) {
(void) shmem_unlink(new_dir, new_dentry);
- if (they_are_dirs)
+ if (they_are_dirs) {
+ drop_nlink(new_dentry->d_inode);
drop_nlink(old_dir);
+ }
} else if (they_are_dirs) {
drop_nlink(old_dir);
inc_nlink(new_dir);
diff --git a/mm/slab.c b/mm/slab.c
index 3eb1c38..3714dd9 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3321,7 +3321,7 @@ static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)
#ifdef CONFIG_NUMA
/*
- * Try allocating on another node if PF_SPREAD_SLAB|PF_MEMPOLICY.
+ * Try allocating on another node if PFA_SPREAD_SLAB|PF_MEMPOLICY.
*
* If we are in_interrupt, then process context, including cpusets and
* mempolicy, may not apply and should not be used for allocation policy.
@@ -3562,7 +3562,7 @@ __do_cache_alloc(struct kmem_cache *cache, gfp_t flags)
{
void *objp;
- if (unlikely(current->flags & (PF_SPREAD_SLAB | PF_MEMPOLICY))) {
+ if (unlikely((current->flags & PF_MEMPOLICY) || cpuset_do_slab_mem_spread())) {
objp = alternate_node_alloc(cache, flags);
if (objp)
goto out;
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index 96238ba..de6662b 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -13,8 +13,6 @@
#include "auth_x.h"
#include "auth_x_protocol.h"
-#define TEMP_TICKET_BUF_LEN 256
-
static void ceph_x_validate_tickets(struct ceph_auth_client *ac, int *pneed);
static int ceph_x_is_authenticated(struct ceph_auth_client *ac)
@@ -64,7 +62,7 @@ static int ceph_x_encrypt(struct ceph_crypto_key *secret,
}
static int ceph_x_decrypt(struct ceph_crypto_key *secret,
- void **p, void *end, void *obuf, size_t olen)
+ void **p, void *end, void **obuf, size_t olen)
{
struct ceph_x_encrypt_header head;
size_t head_len = sizeof(head);
@@ -75,8 +73,14 @@ static int ceph_x_decrypt(struct ceph_crypto_key *secret,
return -EINVAL;
dout("ceph_x_decrypt len %d\n", len);
- ret = ceph_decrypt2(secret, &head, &head_len, obuf, &olen,
- *p, len);
+ if (*obuf == NULL) {
+ *obuf = kmalloc(len, GFP_NOFS);
+ if (!*obuf)
+ return -ENOMEM;
+ olen = len;
+ }
+
+ ret = ceph_decrypt2(secret, &head, &head_len, *obuf, &olen, *p, len);
if (ret)
return ret;
if (head.struct_v != 1 || le64_to_cpu(head.magic) != CEPHX_ENC_MAGIC)
@@ -129,139 +133,120 @@ static void remove_ticket_handler(struct ceph_auth_client *ac,
kfree(th);
}
-static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac,
- struct ceph_crypto_key *secret,
- void *buf, void *end)
+static int process_one_ticket(struct ceph_auth_client *ac,
+ struct ceph_crypto_key *secret,
+ void **p, void *end)
{
struct ceph_x_info *xi = ac->private;
- int num;
- void *p = buf;
+ int type;
+ u8 tkt_struct_v, blob_struct_v;
+ struct ceph_x_ticket_handler *th;
+ void *dbuf = NULL;
+ void *dp, *dend;
+ int dlen;
+ char is_enc;
+ struct timespec validity;
+ struct ceph_crypto_key old_key;
+ void *ticket_buf = NULL;
+ void *tp, *tpend;
+ struct ceph_timespec new_validity;
+ struct ceph_crypto_key new_session_key;
+ struct ceph_buffer *new_ticket_blob;
+ unsigned long new_expires, new_renew_after;
+ u64 new_secret_id;
int ret;
- char *dbuf;
- char *ticket_buf;
- u8 reply_struct_v;
- dbuf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
- if (!dbuf)
- return -ENOMEM;
+ ceph_decode_need(p, end, sizeof(u32) + 1, bad);
- ret = -ENOMEM;
- ticket_buf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
- if (!ticket_buf)
- goto out_dbuf;
+ type = ceph_decode_32(p);
+ dout(" ticket type %d %s\n", type, ceph_entity_type_name(type));
- ceph_decode_need(&p, end, 1 + sizeof(u32), bad);
- reply_struct_v = ceph_decode_8(&p);
- if (reply_struct_v != 1)
+ tkt_struct_v = ceph_decode_8(p);
+ if (tkt_struct_v != 1)
goto bad;
- num = ceph_decode_32(&p);
- dout("%d tickets\n", num);
- while (num--) {
- int type;
- u8 tkt_struct_v, blob_struct_v;
- struct ceph_x_ticket_handler *th;
- void *dp, *dend;
- int dlen;
- char is_enc;
- struct timespec validity;
- struct ceph_crypto_key old_key;
- void *tp, *tpend;
- struct ceph_timespec new_validity;
- struct ceph_crypto_key new_session_key;
- struct ceph_buffer *new_ticket_blob;
- unsigned long new_expires, new_renew_after;
- u64 new_secret_id;
-
- ceph_decode_need(&p, end, sizeof(u32) + 1, bad);
-
- type = ceph_decode_32(&p);
- dout(" ticket type %d %s\n", type, ceph_entity_type_name(type));
-
- tkt_struct_v = ceph_decode_8(&p);
- if (tkt_struct_v != 1)
- goto bad;
-
- th = get_ticket_handler(ac, type);
- if (IS_ERR(th)) {
- ret = PTR_ERR(th);
- goto out;
- }
- /* blob for me */
- dlen = ceph_x_decrypt(secret, &p, end, dbuf,
- TEMP_TICKET_BUF_LEN);
- if (dlen <= 0) {
- ret = dlen;
- goto out;
- }
- dout(" decrypted %d bytes\n", dlen);
- dend = dbuf + dlen;
- dp = dbuf;
+ th = get_ticket_handler(ac, type);
+ if (IS_ERR(th)) {
+ ret = PTR_ERR(th);
+ goto out;
+ }
- tkt_struct_v = ceph_decode_8(&dp);
- if (tkt_struct_v != 1)
- goto bad;
+ /* blob for me */
+ dlen = ceph_x_decrypt(secret, p, end, &dbuf, 0);
+ if (dlen <= 0) {
+ ret = dlen;
+ goto out;
+ }
+ dout(" decrypted %d bytes\n", dlen);
+ dp = dbuf;
+ dend = dp + dlen;
- memcpy(&old_key, &th->session_key, sizeof(old_key));
- ret = ceph_crypto_key_decode(&new_session_key, &dp, dend);
- if (ret)
- goto out;
+ tkt_struct_v = ceph_decode_8(&dp);
+ if (tkt_struct_v != 1)
+ goto bad;
- ceph_decode_copy(&dp, &new_validity, sizeof(new_validity));
- ceph_decode_timespec(&validity, &new_validity);
- new_expires = get_seconds() + validity.tv_sec;
- new_renew_after = new_expires - (validity.tv_sec / 4);
- dout(" expires=%lu renew_after=%lu\n", new_expires,
- new_renew_after);
+ memcpy(&old_key, &th->session_key, sizeof(old_key));
+ ret = ceph_crypto_key_decode(&new_session_key, &dp, dend);
+ if (ret)
+ goto out;
- /* ticket blob for service */
- ceph_decode_8_safe(&p, end, is_enc, bad);
- tp = ticket_buf;
- if (is_enc) {
- /* encrypted */
- dout(" encrypted ticket\n");
- dlen = ceph_x_decrypt(&old_key, &p, end, ticket_buf,
- TEMP_TICKET_BUF_LEN);
- if (dlen < 0) {
- ret = dlen;
- goto out;
- }
- dlen = ceph_decode_32(&tp);
- } else {
- /* unencrypted */
- ceph_decode_32_safe(&p, end, dlen, bad);
- ceph_decode_need(&p, end, dlen, bad);
- ceph_decode_copy(&p, ticket_buf, dlen);
+ ceph_decode_copy(&dp, &new_validity, sizeof(new_validity));
+ ceph_decode_timespec(&validity, &new_validity);
+ new_expires = get_seconds() + validity.tv_sec;
+ new_renew_after = new_expires - (validity.tv_sec / 4);
+ dout(" expires=%lu renew_after=%lu\n", new_expires,
+ new_renew_after);
+
+ /* ticket blob for service */
+ ceph_decode_8_safe(p, end, is_enc, bad);
+ if (is_enc) {
+ /* encrypted */
+ dout(" encrypted ticket\n");
+ dlen = ceph_x_decrypt(&old_key, p, end, &ticket_buf, 0);
+ if (dlen < 0) {
+ ret = dlen;
+ goto out;
}
- tpend = tp + dlen;
- dout(" ticket blob is %d bytes\n", dlen);
- ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
- blob_struct_v = ceph_decode_8(&tp);
- new_secret_id = ceph_decode_64(&tp);
- ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
- if (ret)
+ tp = ticket_buf;
+ dlen = ceph_decode_32(&tp);
+ } else {
+ /* unencrypted */
+ ceph_decode_32_safe(p, end, dlen, bad);
+ ticket_buf = kmalloc(dlen, GFP_NOFS);
+ if (!ticket_buf) {
+ ret = -ENOMEM;
goto out;
-
- /* all is well, update our ticket */
- ceph_crypto_key_destroy(&th->session_key);
- if (th->ticket_blob)
- ceph_buffer_put(th->ticket_blob);
- th->session_key = new_session_key;
- th->ticket_blob = new_ticket_blob;
- th->validity = new_validity;
- th->secret_id = new_secret_id;
- th->expires = new_expires;
- th->renew_after = new_renew_after;
- dout(" got ticket service %d (%s) secret_id %lld len %d\n",
- type, ceph_entity_type_name(type), th->secret_id,
- (int)th->ticket_blob->vec.iov_len);
- xi->have_keys |= th->service;
+ }
+ tp = ticket_buf;
+ ceph_decode_need(p, end, dlen, bad);
+ ceph_decode_copy(p, ticket_buf, dlen);
}
+ tpend = tp + dlen;
+ dout(" ticket blob is %d bytes\n", dlen);
+ ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
+ blob_struct_v = ceph_decode_8(&tp);
+ new_secret_id = ceph_decode_64(&tp);
+ ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
+ if (ret)
+ goto out;
+
+ /* all is well, update our ticket */
+ ceph_crypto_key_destroy(&th->session_key);
+ if (th->ticket_blob)
+ ceph_buffer_put(th->ticket_blob);
+ th->session_key = new_session_key;
+ th->ticket_blob = new_ticket_blob;
+ th->validity = new_validity;
+ th->secret_id = new_secret_id;
+ th->expires = new_expires;
+ th->renew_after = new_renew_after;
+ dout(" got ticket service %d (%s) secret_id %lld len %d\n",
+ type, ceph_entity_type_name(type), th->secret_id,
+ (int)th->ticket_blob->vec.iov_len);
+ xi->have_keys |= th->service;
- ret = 0;
out:
kfree(ticket_buf);
-out_dbuf:
kfree(dbuf);
return ret;
@@ -270,6 +255,34 @@ bad:
goto out;
}
+static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac,
+ struct ceph_crypto_key *secret,
+ void *buf, void *end)
+{
+ void *p = buf;
+ u8 reply_struct_v;
+ u32 num;
+ int ret;
+
+ ceph_decode_8_safe(&p, end, reply_struct_v, bad);
+ if (reply_struct_v != 1)
+ return -EINVAL;
+
+ ceph_decode_32_safe(&p, end, num, bad);
+ dout("%d tickets\n", num);
+
+ while (num--) {
+ ret = process_one_ticket(ac, secret, &p, end);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+
+bad:
+ return -EINVAL;
+}
+
static int ceph_x_build_authorizer(struct ceph_auth_client *ac,
struct ceph_x_ticket_handler *th,
struct ceph_x_authorizer *au)
@@ -583,13 +596,14 @@ static int ceph_x_verify_authorizer_reply(struct ceph_auth_client *ac,
struct ceph_x_ticket_handler *th;
int ret = 0;
struct ceph_x_authorize_reply reply;
+ void *preply = &reply;
void *p = au->reply_buf;
void *end = p + sizeof(au->reply_buf);
th = get_ticket_handler(ac, au->service);
if (IS_ERR(th))
return PTR_ERR(th);
- ret = ceph_x_decrypt(&th->session_key, &p, end, &reply, sizeof(reply));
+ ret = ceph_x_decrypt(&th->session_key, &p, end, &preply, sizeof(reply));
if (ret < 0)
return ret;
if (ret != sizeof(reply))
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 6765da3..bc293c0 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -1042,7 +1042,15 @@ static struct ceph_msg *mon_alloc_msg(struct ceph_connection *con,
if (!m) {
pr_info("alloc_msg unknown type %d\n", type);
*skip = 1;
+ } else if (front_len > m->front_max) {
+ pr_warning("mon_alloc_msg front %d > prealloc %d (%u#%llu)\n",
+ front_len, m->front_max,
+ (unsigned int)con->peer_name.type,
+ le64_to_cpu(con->peer_name.num));
+ ceph_msg_put(m);
+ m = ceph_msg_new(type, front_len, GFP_NOFS, false);
}
+
return m;
}
diff --git a/net/core/dev.c b/net/core/dev.c
index b47375d..0770364 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5546,13 +5546,8 @@ int register_netdevice(struct net_device *dev)
dev->features |= NETIF_F_SOFT_FEATURES;
dev->wanted_features = dev->features & dev->hw_features;
- /* Turn on no cache copy if HW is doing checksum */
if (!(dev->flags & IFF_LOOPBACK)) {
dev->hw_features |= NETIF_F_NOCACHE_COPY;
- if (dev->features & NETIF_F_ALL_CSUM) {
- dev->wanted_features |= NETIF_F_NOCACHE_COPY;
- dev->features |= NETIF_F_NOCACHE_COPY;
- }
}
/* Make NETIF_F_HIGHDMA inheritable to VLAN devices.
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index fd68433..6c34bc9 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -150,6 +150,9 @@ static void ipv4_link_failure(struct sk_buff *skb);
static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu);
static int rt_garbage_collect(struct dst_ops *ops);
+static void __rt_garbage_collect(struct work_struct *w);
+static DECLARE_WORK(rt_gc_worker, __rt_garbage_collect);
+
static void ipv4_dst_ifdown(struct dst_entry *dst, struct net_device *dev,
int how)
{
@@ -977,12 +980,13 @@ static void rt_emergency_hash_rebuild(struct net *net)
and when load increases it reduces to limit cache size.
*/
-static int rt_garbage_collect(struct dst_ops *ops)
+static void __do_rt_garbage_collect(int elasticity, int min_interval)
{
static unsigned long expire = RT_GC_TIMEOUT;
static unsigned long last_gc;
static int rover;
static int equilibrium;
+ static DEFINE_SPINLOCK(rt_gc_lock);
struct rtable *rth;
struct rtable __rcu **rthp;
unsigned long now = jiffies;
@@ -994,9 +998,11 @@ static int rt_garbage_collect(struct dst_ops *ops)
* do not make it too frequently.
*/
+ spin_lock_bh(&rt_gc_lock);
+
RT_CACHE_STAT_INC(gc_total);
- if (now - last_gc < ip_rt_gc_min_interval &&
+ if (now - last_gc < min_interval &&
entries < ip_rt_max_size) {
RT_CACHE_STAT_INC(gc_ignored);
goto out;
@@ -1004,7 +1010,7 @@ static int rt_garbage_collect(struct dst_ops *ops)
entries = dst_entries_get_slow(&ipv4_dst_ops);
/* Calculate number of entries, which we want to expire now. */
- goal = entries - (ip_rt_gc_elasticity << rt_hash_log);
+ goal = entries - (elasticity << rt_hash_log);
if (goal <= 0) {
if (equilibrium < ipv4_dst_ops.gc_thresh)
equilibrium = ipv4_dst_ops.gc_thresh;
@@ -1021,7 +1027,7 @@ static int rt_garbage_collect(struct dst_ops *ops)
equilibrium = entries - goal;
}
- if (now - last_gc >= ip_rt_gc_min_interval)
+ if (now - last_gc >= min_interval)
last_gc = now;
if (goal <= 0) {
@@ -1086,15 +1092,34 @@ static int rt_garbage_collect(struct dst_ops *ops)
if (net_ratelimit())
pr_warn("dst cache overflow\n");
RT_CACHE_STAT_INC(gc_dst_overflow);
- return 1;
+ goto out;
work_done:
- expire += ip_rt_gc_min_interval;
+ expire += min_interval;
if (expire > ip_rt_gc_timeout ||
dst_entries_get_fast(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh ||
dst_entries_get_slow(&ipv4_dst_ops) < ipv4_dst_ops.gc_thresh)
expire = ip_rt_gc_timeout;
-out: return 0;
+out:
+ spin_unlock_bh(&rt_gc_lock);
+}
+
+static void __rt_garbage_collect(struct work_struct *w)
+{
+ __do_rt_garbage_collect(ip_rt_gc_elasticity, ip_rt_gc_min_interval);
+}
+
+static int rt_garbage_collect(struct dst_ops *ops)
+{
+ if (!work_pending(&rt_gc_worker))
+ schedule_work(&rt_gc_worker);
+
+ if (dst_entries_get_fast(&ipv4_dst_ops) >= ip_rt_max_size ||
+ dst_entries_get_slow(&ipv4_dst_ops) >= ip_rt_max_size) {
+ RT_CACHE_STAT_INC(gc_dst_overflow);
+ return 1;
+ }
+ return 0;
}
/*
@@ -1151,7 +1176,7 @@ static struct rtable *rt_intern_hash(unsigned hash, struct rtable *rt,
unsigned long now;
u32 min_score;
int chain_length;
- int attempts = !in_softirq();
+ int attempts = 1;
restart:
chain_length = 0;
@@ -1287,14 +1312,15 @@ restart:
can be released. Try to shrink route cache,
it is most likely it holds some neighbour records.
*/
- if (attempts-- > 0) {
- int saved_elasticity = ip_rt_gc_elasticity;
- int saved_int = ip_rt_gc_min_interval;
- ip_rt_gc_elasticity = 1;
- ip_rt_gc_min_interval = 0;
- rt_garbage_collect(&ipv4_dst_ops);
- ip_rt_gc_min_interval = saved_int;
- ip_rt_gc_elasticity = saved_elasticity;
+ if (!in_softirq() && attempts-- > 0) {
+ static DEFINE_SPINLOCK(lock);
+
+ if (spin_trylock(&lock)) {
+ __do_rt_garbage_collect(1, 0);
+ spin_unlock(&lock);
+ } else {
+ spin_unlock_wait(&lock);
+ }
goto restart;
}
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 98fd738..ef9052f 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1366,7 +1366,7 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
fptr = (struct frag_hdr *)(skb_network_header(skb) + unfrag_ip6hlen);
fptr->nexthdr = nexthdr;
fptr->reserved = 0;
- ipv6_select_ident(fptr, (struct rt6_info *)skb_dst(skb));
+ fptr->identification = skb_shinfo(skb)->ip6_frag_id;
/* Fragment the skb. ipv6 header and the remaining fields of the
* fragment header are updated in ipv6_gso_segment()
diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 82ed7df..cf7821b7 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -774,7 +774,8 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
/* If PMTU discovery was enabled, use the MTU that was discovered */
dst = sk_dst_get(tunnel->sock);
if (dst != NULL) {
- u32 pmtu = dst_mtu(__sk_dst_get(tunnel->sock));
+ u32 pmtu = dst_mtu(dst);
+
if (pmtu != 0)
session->mtu = session->mru = pmtu -
PPPOL2TP_HEADER_OVERHEAD;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index add9f94..52646f9 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -5059,6 +5059,9 @@ int cfg80211_testmode_reply(struct sk_buff *skb)
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
+ /* clear CB data for netlink core to own from now on */
+ memset(skb->cb, 0, sizeof(skb->cb));
+
if (WARN_ON(!rdev->testmode_info)) {
kfree_skb(skb);
return -EINVAL;
@@ -5085,6 +5088,9 @@ void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
+ /* clear CB data for netlink core to own from now on */
+ memset(skb->cb, 0, sizeof(skb->cb));
+
nla_nest_end(skb, data);
genlmsg_end(skb, hdr);
genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), skb, 0,
diff --git a/scripts/tags.sh b/scripts/tags.sh
index cf7b12f..246e4f6 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -153,7 +153,10 @@ exuberant()
--regex-c++='/CLEARPAGEFLAG_NOOP\(([^,)]*).*/ClearPage\1/' \
--regex-c++='/__CLEARPAGEFLAG_NOOP\(([^,)]*).*/__ClearPage\1/' \
--regex-c++='/TESTCLEARFLAG_FALSE\(([^,)]*).*/TestClearPage\1/' \
- --regex-c++='/__TESTCLEARFLAG_FALSE\(([^,)]*).*/__TestClearPage\1/'
+ --regex-c++='/__TESTCLEARFLAG_FALSE\(([^,)]*).*/__TestClearPage\1/'\
+ --regex-c++='/TASK_PFA_TEST\([^,]*,\s*([^)]*)\)/task_\1/' \
+ --regex-c++='/TASK_PFA_SET\([^,]*,\s*([^)]*)\)/task_set_\1/' \
+ --regex-c++='/TASK_PFA_CLEAR\([^,]*,\s*([^)]*)\)/task_clear_\1/'
all_kconfigs | xargs $1 -a \
--langdef=kconfig --language-force=kconfig \
@@ -195,7 +198,10 @@ emacs()
--regex='/CLEARPAGEFLAG_NOOP\(([^,)]*).*/ClearPage\1/' \
--regex='/__CLEARPAGEFLAG_NOOP\(([^,)]*).*/__ClearPage\1/' \
--regex='/TESTCLEARFLAG_FALSE\(([^,)]*).*/TestClearPage\1/' \
- --regex='/__TESTCLEARFLAG_FALSE\(([^,)]*).*/__TestClearPage\1/'
+ --regex='/__TESTCLEARFLAG_FALSE\(([^,)]*).*/__TestClearPage\1/'\
+ --regex='/TASK_PFA_TEST\([^,]*,\s*([^)]*)\)/task_\1/' \
+ --regex='/TASK_PFA_SET\([^,]*,\s*([^)]*)\)/task_set_\1/' \
+ --regex='/TASK_PFA_CLEAR\([^,]*,\s*([^)]*)\)/task_clear_\1/'
all_kconfigs | xargs $1 -a \
--regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 370fc56..6292575 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1693,14 +1693,16 @@ static int snd_pcm_lib_ioctl_fifo_size(struct snd_pcm_substream *substream,
{
struct snd_pcm_hw_params *params = arg;
snd_pcm_format_t format;
- int channels, width;
+ int channels;
+ ssize_t frame_size;
params->fifo_size = substream->runtime->hw.fifo_size;
if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_FIFO_IN_FRAMES)) {
format = params_format(params);
channels = params_channels(params);
- width = snd_pcm_format_physical_width(format);
- params->fifo_size /= width * channels;
+ frame_size = snd_pcm_format_size(format, channels);
+ if (frame_size > 0)
+ params->fifo_size /= (unsigned)frame_size;
}
return 0;
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 36284b8..9461a00 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -811,6 +811,7 @@ static void alc_auto_init_amp(struct hda_codec *codec, int type)
case 0x10ec0885:
case 0x10ec0887:
/*case 0x10ec0889:*/ /* this causes an SPDIF problem */
+ case 0x10ec0900:
alc889_coef_init(codec);
break;
case 0x10ec0888:
@@ -5516,6 +5517,7 @@ static int patch_alc882(struct hda_codec *codec)
switch (codec->vendor_id) {
case 0x10ec0882:
case 0x10ec0885:
+ case 0x10ec0900:
break;
default:
/* ALC883 and variants */
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index 6ac7b82..9998719 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -392,7 +392,7 @@ static int i2s_set_sysclk(struct snd_soc_dai *dai,
if (dir == SND_SOC_CLOCK_IN)
rfs = 0;
- if ((rfs && other->rfs && (other->rfs != rfs)) ||
+ if ((rfs && other && other->rfs && (other->rfs != rfs)) ||
(any_active(i2s) &&
(((dir == SND_SOC_CLOCK_IN)
&& !(mod & MOD_CDCLKCON)) ||
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index c88d974..34c1fbb 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2799,7 +2799,7 @@ int snd_soc_bytes_put(struct snd_kcontrol *kcontrol,
unsigned int val;
void *data;
- if (!codec->using_regmap)
+ if (!codec->using_regmap || !params->num_regs)
return -EINVAL;
data = ucontrol->value.bytes.data;
From: Mark <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit c66f1c62e85927357e7b3f4c701614dcb5c498a2 upstream.
The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware
seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/
SCM chip set. However its firmware restricts it to only work with Jaz
drives.
On connecting the cable a message like this appears four times in the log:
reset full speed USB device number 4 using uhci_hcd
That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it.
Signed-off-by: Mark Knibbs <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1d9fc30..813422e 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -733,6 +733,12 @@ UNUSUAL_DEV( 0x059b, 0x0001, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
+UNUSUAL_DEV( 0x059b, 0x0040, 0x0100, 0x0100,
+ "Iomega",
+ "Jaz USB Adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
/* Reported by <[email protected]> */
UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
"LaCie",
--
1.9.1
From: John Sung <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit a80d8b02751060a178bb1f7a6b7a93645a7a308b upstream.
When running a 32-bit inputattach utility in a 64-bit system, there will be
error code "inputattach: can't set device type". This is caused by the
serport device driver not supporting compat_ioctl, so that SPIOCSTYPE ioctl
fails.
Signed-off-by: John Sung <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/input/serio/serport.c | 45 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 38 insertions(+), 7 deletions(-)
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 8755f5f..e4ecf3b 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/tty.h>
+#include <linux/compat.h>
MODULE_AUTHOR("Vojtech Pavlik <[email protected]>");
MODULE_DESCRIPTION("Input device TTY line discipline");
@@ -196,28 +197,55 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
return 0;
}
+static void serport_set_type(struct tty_struct *tty, unsigned long type)
+{
+ struct serport *serport = tty->disc_data;
+
+ serport->id.proto = type & 0x000000ff;
+ serport->id.id = (type & 0x0000ff00) >> 8;
+ serport->id.extra = (type & 0x00ff0000) >> 16;
+}
+
/*
* serport_ldisc_ioctl() allows to set the port protocol, and device ID
*/
-static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int serport_ldisc_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
- struct serport *serport = (struct serport*) tty->disc_data;
- unsigned long type;
-
if (cmd == SPIOCSTYPE) {
+ unsigned long type;
+
if (get_user(type, (unsigned long __user *) arg))
return -EFAULT;
- serport->id.proto = type & 0x000000ff;
- serport->id.id = (type & 0x0000ff00) >> 8;
- serport->id.extra = (type & 0x00ff0000) >> 16;
+ serport_set_type(tty, type);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_SPIOCSTYPE _IOW('q', 0x01, compat_ulong_t)
+static long serport_ldisc_compat_ioctl(struct tty_struct *tty,
+ struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ if (cmd == COMPAT_SPIOCSTYPE) {
+ void __user *uarg = compat_ptr(arg);
+ compat_ulong_t compat_type;
+
+ if (get_user(compat_type, (compat_ulong_t __user *)uarg))
+ return -EFAULT;
+ serport_set_type(tty, compat_type);
return 0;
}
return -EINVAL;
}
+#endif
static void serport_ldisc_write_wakeup(struct tty_struct * tty)
{
@@ -241,6 +269,9 @@ static struct tty_ldisc_ops serport_ldisc = {
.close = serport_ldisc_close,
.read = serport_ldisc_read,
.ioctl = serport_ldisc_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = serport_ldisc_compat_ioctl,
+#endif
.receive_buf = serport_ldisc_receive,
.write_wakeup = serport_ldisc_write_wakeup
};
--
1.9.1
From: Ilya Dryomov <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 597cda357716a3cf8d994cb11927af917c8d71fa upstream.
Add a helper for processing individual cephx auth tickets. Needed for
the next commit, which deals with allocating ticket buffers. (Most of
the diff here is whitespace - view with git diff -b).
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Sage Weil <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
net/ceph/auth_x.c | 228 +++++++++++++++++++++++++++++-------------------------
1 file changed, 124 insertions(+), 104 deletions(-)
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index 96238ba..0eb146d 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -129,17 +129,131 @@ static void remove_ticket_handler(struct ceph_auth_client *ac,
kfree(th);
}
+static int process_one_ticket(struct ceph_auth_client *ac,
+ struct ceph_crypto_key *secret,
+ void **p, void *end,
+ void *dbuf, void *ticket_buf)
+{
+ struct ceph_x_info *xi = ac->private;
+ int type;
+ u8 tkt_struct_v, blob_struct_v;
+ struct ceph_x_ticket_handler *th;
+ void *dp, *dend;
+ int dlen;
+ char is_enc;
+ struct timespec validity;
+ struct ceph_crypto_key old_key;
+ void *tp, *tpend;
+ struct ceph_timespec new_validity;
+ struct ceph_crypto_key new_session_key;
+ struct ceph_buffer *new_ticket_blob;
+ unsigned long new_expires, new_renew_after;
+ u64 new_secret_id;
+ int ret;
+
+ ceph_decode_need(p, end, sizeof(u32) + 1, bad);
+
+ type = ceph_decode_32(p);
+ dout(" ticket type %d %s\n", type, ceph_entity_type_name(type));
+
+ tkt_struct_v = ceph_decode_8(p);
+ if (tkt_struct_v != 1)
+ goto bad;
+
+ th = get_ticket_handler(ac, type);
+ if (IS_ERR(th)) {
+ ret = PTR_ERR(th);
+ goto out;
+ }
+
+ /* blob for me */
+ dlen = ceph_x_decrypt(secret, p, end, dbuf,
+ TEMP_TICKET_BUF_LEN);
+ if (dlen <= 0) {
+ ret = dlen;
+ goto out;
+ }
+ dout(" decrypted %d bytes\n", dlen);
+ dp = dbuf;
+ dend = dp + dlen;
+
+ tkt_struct_v = ceph_decode_8(&dp);
+ if (tkt_struct_v != 1)
+ goto bad;
+
+ memcpy(&old_key, &th->session_key, sizeof(old_key));
+ ret = ceph_crypto_key_decode(&new_session_key, &dp, dend);
+ if (ret)
+ goto out;
+
+ ceph_decode_copy(&dp, &new_validity, sizeof(new_validity));
+ ceph_decode_timespec(&validity, &new_validity);
+ new_expires = get_seconds() + validity.tv_sec;
+ new_renew_after = new_expires - (validity.tv_sec / 4);
+ dout(" expires=%lu renew_after=%lu\n", new_expires,
+ new_renew_after);
+
+ /* ticket blob for service */
+ ceph_decode_8_safe(p, end, is_enc, bad);
+ tp = ticket_buf;
+ if (is_enc) {
+ /* encrypted */
+ dout(" encrypted ticket\n");
+ dlen = ceph_x_decrypt(&old_key, p, end, ticket_buf,
+ TEMP_TICKET_BUF_LEN);
+ if (dlen < 0) {
+ ret = dlen;
+ goto out;
+ }
+ dlen = ceph_decode_32(&tp);
+ } else {
+ /* unencrypted */
+ ceph_decode_32_safe(p, end, dlen, bad);
+ ceph_decode_need(p, end, dlen, bad);
+ ceph_decode_copy(p, ticket_buf, dlen);
+ }
+ tpend = tp + dlen;
+ dout(" ticket blob is %d bytes\n", dlen);
+ ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
+ blob_struct_v = ceph_decode_8(&tp);
+ new_secret_id = ceph_decode_64(&tp);
+ ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
+ if (ret)
+ goto out;
+
+ /* all is well, update our ticket */
+ ceph_crypto_key_destroy(&th->session_key);
+ if (th->ticket_blob)
+ ceph_buffer_put(th->ticket_blob);
+ th->session_key = new_session_key;
+ th->ticket_blob = new_ticket_blob;
+ th->validity = new_validity;
+ th->secret_id = new_secret_id;
+ th->expires = new_expires;
+ th->renew_after = new_renew_after;
+ dout(" got ticket service %d (%s) secret_id %lld len %d\n",
+ type, ceph_entity_type_name(type), th->secret_id,
+ (int)th->ticket_blob->vec.iov_len);
+ xi->have_keys |= th->service;
+
+out:
+ return ret;
+
+bad:
+ ret = -EINVAL;
+ goto out;
+}
+
static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac,
struct ceph_crypto_key *secret,
void *buf, void *end)
{
- struct ceph_x_info *xi = ac->private;
- int num;
void *p = buf;
- int ret;
char *dbuf;
char *ticket_buf;
u8 reply_struct_v;
+ u32 num;
+ int ret;
dbuf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
if (!dbuf)
@@ -150,112 +264,18 @@ static int ceph_x_proc_ticket_reply(struct ceph_auth_client *ac,
if (!ticket_buf)
goto out_dbuf;
- ceph_decode_need(&p, end, 1 + sizeof(u32), bad);
- reply_struct_v = ceph_decode_8(&p);
+ ceph_decode_8_safe(&p, end, reply_struct_v, bad);
if (reply_struct_v != 1)
- goto bad;
- num = ceph_decode_32(&p);
- dout("%d tickets\n", num);
- while (num--) {
- int type;
- u8 tkt_struct_v, blob_struct_v;
- struct ceph_x_ticket_handler *th;
- void *dp, *dend;
- int dlen;
- char is_enc;
- struct timespec validity;
- struct ceph_crypto_key old_key;
- void *tp, *tpend;
- struct ceph_timespec new_validity;
- struct ceph_crypto_key new_session_key;
- struct ceph_buffer *new_ticket_blob;
- unsigned long new_expires, new_renew_after;
- u64 new_secret_id;
-
- ceph_decode_need(&p, end, sizeof(u32) + 1, bad);
-
- type = ceph_decode_32(&p);
- dout(" ticket type %d %s\n", type, ceph_entity_type_name(type));
-
- tkt_struct_v = ceph_decode_8(&p);
- if (tkt_struct_v != 1)
- goto bad;
-
- th = get_ticket_handler(ac, type);
- if (IS_ERR(th)) {
- ret = PTR_ERR(th);
- goto out;
- }
-
- /* blob for me */
- dlen = ceph_x_decrypt(secret, &p, end, dbuf,
- TEMP_TICKET_BUF_LEN);
- if (dlen <= 0) {
- ret = dlen;
- goto out;
- }
- dout(" decrypted %d bytes\n", dlen);
- dend = dbuf + dlen;
- dp = dbuf;
-
- tkt_struct_v = ceph_decode_8(&dp);
- if (tkt_struct_v != 1)
- goto bad;
+ return -EINVAL;
- memcpy(&old_key, &th->session_key, sizeof(old_key));
- ret = ceph_crypto_key_decode(&new_session_key, &dp, dend);
- if (ret)
- goto out;
+ ceph_decode_32_safe(&p, end, num, bad);
+ dout("%d tickets\n", num);
- ceph_decode_copy(&dp, &new_validity, sizeof(new_validity));
- ceph_decode_timespec(&validity, &new_validity);
- new_expires = get_seconds() + validity.tv_sec;
- new_renew_after = new_expires - (validity.tv_sec / 4);
- dout(" expires=%lu renew_after=%lu\n", new_expires,
- new_renew_after);
-
- /* ticket blob for service */
- ceph_decode_8_safe(&p, end, is_enc, bad);
- tp = ticket_buf;
- if (is_enc) {
- /* encrypted */
- dout(" encrypted ticket\n");
- dlen = ceph_x_decrypt(&old_key, &p, end, ticket_buf,
- TEMP_TICKET_BUF_LEN);
- if (dlen < 0) {
- ret = dlen;
- goto out;
- }
- dlen = ceph_decode_32(&tp);
- } else {
- /* unencrypted */
- ceph_decode_32_safe(&p, end, dlen, bad);
- ceph_decode_need(&p, end, dlen, bad);
- ceph_decode_copy(&p, ticket_buf, dlen);
- }
- tpend = tp + dlen;
- dout(" ticket blob is %d bytes\n", dlen);
- ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
- blob_struct_v = ceph_decode_8(&tp);
- new_secret_id = ceph_decode_64(&tp);
- ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
+ while (num--) {
+ ret = process_one_ticket(ac, secret, &p, end,
+ dbuf, ticket_buf);
if (ret)
goto out;
-
- /* all is well, update our ticket */
- ceph_crypto_key_destroy(&th->session_key);
- if (th->ticket_blob)
- ceph_buffer_put(th->ticket_blob);
- th->session_key = new_session_key;
- th->ticket_blob = new_ticket_blob;
- th->validity = new_validity;
- th->secret_id = new_secret_id;
- th->expires = new_expires;
- th->renew_after = new_renew_after;
- dout(" got ticket service %d (%s) secret_id %lld len %d\n",
- type, ceph_entity_type_name(type), th->secret_id,
- (int)th->ticket_blob->vec.iov_len);
- xi->have_keys |= th->service;
}
ret = 0;
--
1.9.1
From: Taylor Braun-Jones <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 9c491c372d677b6420e0f8c6361fe422791662cc upstream.
Signed-off-by: Taylor Braun-Jones <[email protected]>
Cc: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 2 ++
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d91185a..8425e9e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -960,6 +960,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
/* ekey Devices */
{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
+ /* GE Healthcare devices */
+ { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index a5cd5f7..7628b91 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1382,3 +1382,9 @@
* ekey biometric systems GmbH (http://ekey.net/)
*/
#define FTDI_EKEY_CONV_USB_PID 0xCB08 /* Converter USB */
+
+/*
+ * GE Healthcare devices
+ */
+#define GE_HEALTHCARE_VID 0x1901
+#define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015
--
1.9.1
From: Thomas Pugliese <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 675f0ab2fe5a0f7325208e60b617a5f32b86d72c upstream.
Make sure the uwb_dev->bce entry is set before calling uwb_dev_add in
uwbd_dev_onair so that usermode will only see the device after it is
properly initialized. This fixes a kernel panic that can occur if
usermode tries to access the IEs sysfs attribute of a UWB device before
the driver has had a chance to set the beacon cache entry.
Signed-off-by: Thomas Pugliese <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/uwb/lc-dev.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
index 5241f1d..3c9e929 100644
--- a/drivers/uwb/lc-dev.c
+++ b/drivers/uwb/lc-dev.c
@@ -441,16 +441,19 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
uwb_dev->mac_addr = *bce->mac_addr;
uwb_dev->dev_addr = bce->dev_addr;
dev_set_name(&uwb_dev->dev, macbuf);
+
+ /* plug the beacon cache */
+ bce->uwb_dev = uwb_dev;
+ uwb_dev->bce = bce;
+ uwb_bce_get(bce); /* released in uwb_dev_sys_release() */
+
result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc);
if (result < 0) {
dev_err(dev, "new device %s: cannot instantiate device\n",
macbuf);
goto error_dev_add;
}
- /* plug the beacon cache */
- bce->uwb_dev = uwb_dev;
- uwb_dev->bce = bce;
- uwb_bce_get(bce); /* released in uwb_dev_sys_release() */
+
dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n",
macbuf, devbuf, rc->uwb_dev.dev.parent->bus->name,
dev_name(rc->uwb_dev.dev.parent));
@@ -458,6 +461,8 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
return;
error_dev_add:
+ bce->uwb_dev = NULL;
+ uwb_bce_put(bce);
kfree(uwb_dev);
return;
}
--
1.9.1
From: Hans de Goede <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 271329b3c798b2102120f5df829071c211ef00ed upstream.
Adjust Elantech signature validation to account fo rnewer models of
touchpads.
Reported-and-tested-by: Màrius Monton <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/input/mouse/elantech.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index d93ea64..f2c2ffe 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1218,6 +1218,13 @@ static bool elantech_is_signature_valid(const unsigned char *param)
if (param[1] == 0)
return true;
+ /*
+ * Some models have a revision higher then 20. Meaning param[2] may
+ * be 10 or 20, skip the rates check for these.
+ */
+ if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40)
+ return true;
+
for (i = 0; i < ARRAY_SIZE(rates); i++)
if (param[2] == rates[i])
return false;
--
1.9.1
From: Keith Busch <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 2da78092dda13f1efd26edbbf99a567776913750 upstream.
Releases the dev_t minor when all references are closed to prevent
another device from acquiring the same major/minor.
Since the partition's release may be invoked from call_rcu's soft-irq
context, the ext_dev_idr's mutex had to be replaced with a spinlock so
as not so sleep.
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
[lizf: Backported to 3.4:
- adjust context
- remove idr_preload() and idr_preload_end()]
Signed-off-by: Zefan Li <[email protected]>
---
block/genhd.c | 18 +++++++++---------
block/partition-generic.c | 2 +-
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/block/genhd.c b/block/genhd.c
index d815a0f..54867f4 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -27,10 +27,10 @@ struct kobject *block_depr;
/* for extended dynamic devt allocation, currently only one major is used */
#define NR_EXT_DEVT (1 << MINORBITS)
-/* For extended devt allocation. ext_devt_mutex prevents look up
+/* For extended devt allocation. ext_devt_lock prevents look up
* results from going away underneath its user.
*/
-static DEFINE_MUTEX(ext_devt_mutex);
+static DEFINE_SPINLOCK(ext_devt_lock);
static DEFINE_IDR(ext_devt_idr);
static struct device_type disk_type;
@@ -420,13 +420,13 @@ int blk_alloc_devt(struct hd_struct *part, dev_t *devt)
do {
if (!idr_pre_get(&ext_devt_idr, GFP_KERNEL))
return -ENOMEM;
- mutex_lock(&ext_devt_mutex);
+ spin_lock(&ext_devt_lock);
rc = idr_get_new(&ext_devt_idr, part, &idx);
if (!rc && idx >= NR_EXT_DEVT) {
idr_remove(&ext_devt_idr, idx);
rc = -EBUSY;
}
- mutex_unlock(&ext_devt_mutex);
+ spin_unlock(&ext_devt_lock);
} while (rc == -EAGAIN);
if (rc)
@@ -453,9 +453,9 @@ void blk_free_devt(dev_t devt)
return;
if (MAJOR(devt) == BLOCK_EXT_MAJOR) {
- mutex_lock(&ext_devt_mutex);
+ spin_lock(&ext_devt_lock);
idr_remove(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
- mutex_unlock(&ext_devt_mutex);
+ spin_unlock(&ext_devt_lock);
}
}
@@ -662,7 +662,6 @@ void del_gendisk(struct gendisk *disk)
if (!sysfs_deprecated)
sysfs_remove_link(block_depr, dev_name(disk_to_dev(disk)));
device_del(disk_to_dev(disk));
- blk_free_devt(disk_to_dev(disk)->devt);
}
EXPORT_SYMBOL(del_gendisk);
@@ -687,13 +686,13 @@ struct gendisk *get_gendisk(dev_t devt, int *partno)
} else {
struct hd_struct *part;
- mutex_lock(&ext_devt_mutex);
+ spin_lock(&ext_devt_lock);
part = idr_find(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
if (part && get_disk(part_to_disk(part))) {
*partno = part->partno;
disk = part_to_disk(part);
}
- mutex_unlock(&ext_devt_mutex);
+ spin_unlock(&ext_devt_lock);
}
return disk;
@@ -1101,6 +1100,7 @@ static void disk_release(struct device *dev)
{
struct gendisk *disk = dev_to_disk(dev);
+ blk_free_devt(dev->devt);
disk_release_events(disk);
kfree(disk->random);
disk_replace_part_tbl(disk, NULL);
diff --git a/block/partition-generic.c b/block/partition-generic.c
index 7b8b8d1..daafc85 100644
--- a/block/partition-generic.c
+++ b/block/partition-generic.c
@@ -211,6 +211,7 @@ static const struct attribute_group *part_attr_groups[] = {
static void part_release(struct device *dev)
{
struct hd_struct *p = dev_to_part(dev);
+ blk_free_devt(dev->devt);
free_part_stats(p);
free_part_info(p);
kfree(p);
@@ -253,7 +254,6 @@ void delete_partition(struct gendisk *disk, int partno)
rcu_assign_pointer(ptbl->last_lookup, NULL);
kobject_put(part->holder_dir);
device_del(part_to_dev(part));
- blk_free_devt(part_devt(part));
hd_struct_put(part);
}
--
1.9.1
From: Ross Lagerwall <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 61a734d305e16944b42730ef582a7171dc733321 upstream.
Always freeze processes when suspending and thaw processes when resuming
to prevent a race noticeable with HVM guests.
This prevents a deadlock where the khubd kthread (which is designed to
be freezable) acquires a usb device lock and then tries to allocate
memory which requires the disk which hasn't been resumed yet.
Meanwhile, the xenwatch thread deadlocks waiting for the usb device
lock.
Freezing processes fixes this because the khubd thread is only thawed
after the xenwatch thread finishes resuming all the devices.
Signed-off-by: Ross Lagerwall <[email protected]>
Signed-off-by: David Vrabel <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
drivers/xen/manage.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 412b96c..8da1ed1 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -109,16 +109,11 @@ static void do_suspend(void)
shutting_down = SHUTDOWN_SUSPEND;
-#ifdef CONFIG_PREEMPT
- /* If the kernel is preemptible, we need to freeze all the processes
- to prevent them from being in the middle of a pagetable update
- during suspend. */
err = freeze_processes();
if (err) {
printk(KERN_ERR "xen suspend: freeze failed %d\n", err);
goto out;
}
-#endif
err = dpm_suspend_start(PMSG_FREEZE);
if (err) {
@@ -170,10 +165,8 @@ out_resume:
clock_was_set();
out_thaw:
-#ifdef CONFIG_PREEMPT
thaw_processes();
out:
-#endif
shutting_down = SHUTDOWN_INVALID;
}
#endif /* CONFIG_HIBERNATE_CALLBACKS */
--
1.9.1
From: James Ralston <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 6cad1376954e591c3c41500c4e586e183e7ffe6d upstream.
This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH.
Signed-off-by: James Ralston <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/ata/ata_piix.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 9f165a81..2f081a3 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -362,6 +362,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
/* SATA Controller IDE (Coleto Creek) */
{ 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c88, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c89, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c80, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c81, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
{ } /* terminate list */
};
--
1.9.1
From: Larry Finger <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit c66517165610b911e4c6d268f28d8c640832dbd1 upstream.
The Sitecom WLA-2102 adapter uses this driver.
Reported-by: Nico Baggus <[email protected]>
Signed-off-by: Larry Finger <[email protected]>
Cc: Nico Baggus <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 52a9c33..2c4cdce 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -306,6 +306,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
+ {RTL_USB_DEVICE(0x0df6, 0x0070, rtl92cu_hal_cfg)}, /*Sitecom - 150N */
{RTL_USB_DEVICE(0x0df6, 0x0077, rtl92cu_hal_cfg)}, /*Sitecom-WLA2100V2*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
{RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
--
1.9.1
From: Alban Crequy <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 71b1fb5c4473a5b1e601d41b109bdfe001ec82e0 upstream.
/proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are
allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely.
Signed-off-by: Alban Crequy <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
[lizf: Backported to 3.4:
- adjust context
- s/name/dentry->d_name.name/]
Signed-off-by: Zefan Li <[email protected]>
---
kernel/cgroup.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 7c8f4f7..c776f89 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -3838,6 +3838,11 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
{
struct cgroup *c_parent = dentry->d_parent->d_fsdata;
+ /* Do not accept '\n' to prevent making /proc/<pid>/cgroup unparsable.
+ */
+ if (strchr(dentry->d_name.name, '\n'))
+ return -EINVAL;
+
/* the vfs holds inode->i_mutex already */
return cgroup_create(c_parent, dentry, mode | S_IFDIR);
}
--
1.9.1
From: Eliad Peller <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit a5fe8e7695dc3f547e955ad2b662e3e72969e506 upstream.
alpha2 is defined as 2-chars array, but is used in multiple
places as string (e.g. with nla_put_string calls), which
might leak kernel data.
Solve it by simply adding an extra char for the NULL
terminator, making such operations safe.
Signed-off-by: Eliad Peller <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <[email protected]>
---
include/net/regulatory.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index a5f7993..8d64abf 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -97,7 +97,7 @@ struct ieee80211_reg_rule {
struct ieee80211_regdomain {
u32 n_reg_rules;
- char alpha2[2];
+ char alpha2[3];
u8 dfs_region;
struct ieee80211_reg_rule reg_rules[];
};
--
1.9.1
From: Thomas Hellstrom <[email protected]>
3.4.105-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit f01ea0c3d9db536c64d47922716d8b3b8f21d850 upstream.
The code waiting for fifo idle was incorrect and could possibly spin
forever under certain circumstances.
Signed-off-by: Thomas Hellstrom <[email protected]>
Reported-by: Mark Sheldon <[email protected]>
Reviewed-by: Jakob Bornecrantz <[email protected]>
Reivewed-by: Mark Sheldon <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index a0c2f12..decca82 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -163,8 +163,9 @@ void vmw_fifo_release(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC);
while (vmw_read(dev_priv, SVGA_REG_BUSY) != 0)
- vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC);
+ ;
dev_priv->last_read_seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE);
--
1.9.1
On 11/27/2014 12:36 AM, [email protected] wrote:
> From: Zefan Li <[email protected]>
>
> This is the start of the stable review cycle for the 3.4.105 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by 2014年 11月 29日 星期六 08:05:38 UTC.
> Anything received after that time might be too late.
>
Build results:
total: 119 pass: 114 fail: 5
Failed builds:
arm:s3c6400_defconfig
arm:nhk8815_defconfig
score:defconfig
sparc64:allmodconfig
xtensa:allmodconfig
Qemu test results:
total: 23 pass: 22 fail: 1
Failed tests:
arm:arm_versatile_defconfig
The arm build failures are due to
Inconsistent kallsyms data
This is a bug - please report about it
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
make: *** [vmlinux] Error 1
This seems to be toolchain related. I switched from the cross toolchain
provided with yocto 1.4.2 to the toolchain provided with yocto 1.7.
This seems to fix the problem. Just mentioning it here in case someone
uses an older toolchain.
Details are available at http://server.roeck-us.net:8010/builders.
Guenter
> Build results:
> total: 119 pass: 114 fail: 5
> Failed builds:
> arm:s3c6400_defconfig
> arm:nhk8815_defconfig
> score:defconfig
> sparc64:allmodconfig
> xtensa:allmodconfig
>
> Qemu test results:
> total: 23 pass: 22 fail: 1
> Failed tests:
> arm:arm_versatile_defconfig
>
> The arm build failures are due to
>
> Inconsistent kallsyms data
> This is a bug - please report about it
> Try make KALLSYMS_EXTRA_PASS=1 as a workaround
> make: *** [vmlinux] Error 1
>
> This seems to be toolchain related. I switched from the cross toolchain
> provided with yocto 1.4.2 to the toolchain provided with yocto 1.7.
> This seems to fix the problem. Just mentioning it here in case someone
> uses an older toolchain.
>
> Details are available at http://server.roeck-us.net:8010/builders.
>
Thanks for testing!
[email protected] [[email protected]] wrote:
| From: Cong Wang <[email protected]>
|
| 3.4.105-rc1 review patch. If anyone has any objections, please let me know.
|
<snip>
|
| diff --git a/kernel/events/core.c b/kernel/events/core.c
| index 685ce46..c958be1 100644
| --- a/kernel/events/core.c
| +++ b/kernel/events/core.c
| @@ -1702,6 +1702,16 @@ retry:
| */
| if (ctx->is_active) {
| raw_spin_unlock_irq(&ctx->lock);
| + /*
| + * Reload the task pointer, it might have been changed by
| + * a concurrent perf_event_context_sched_out().
| + */
| + task = ctx->task;
| + /*
| + * Reload the task pointer, it might have been changed by
| + * a concurrent perf_event_context_sched_out().
| + */
| + task = ctx->task;
Something wrong in the way the patch was applied ?
The lines are identical...
The original commit, 3577af70, has the change applied in two
places: perf_event_disable() and perf_remove_from_context().
| goto retry;
| }
|
| --
| 1.9.1
|
| --
| To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
| the body of a message to [email protected]
| More majordomo info at http://vger.kernel.org/majordomo-info.html
| Please read the FAQ at http://www.tux.org/lkml/
> | diff --git a/kernel/events/core.c b/kernel/events/core.c
> | index 685ce46..c958be1 100644
> | --- a/kernel/events/core.c
> | +++ b/kernel/events/core.c
> | @@ -1702,6 +1702,16 @@ retry:
> | */
> | if (ctx->is_active) {
> | raw_spin_unlock_irq(&ctx->lock);
> | + /*
> | + * Reload the task pointer, it might have been changed by
> | + * a concurrent perf_event_context_sched_out().
> | + */
> | + task = ctx->task;
> | + /*
> | + * Reload the task pointer, it might have been changed by
> | + * a concurrent perf_event_context_sched_out().
> | + */
> | + task = ctx->task;
>
> Something wrong in the way the patch was applied ?
> The lines are identical...
>
> The original commit, 3577af70, has the change applied in two
> places: perf_event_disable() and perf_remove_from_context().
>
I guess it's because the two parts of the original patch are identical,
so the patch command wasn't smart enough to do the right work.
It looks to me this won't make things worse than bebore, so I'll fix
it in 3.4.106.
Thanks for spotting this!