This series patch V8 is changed from V7 as following:
1. The V7 MSR strange delta value is checked with locking problem. We changed
f81232_set_mctrl() & f81232_read_msr() lock mechanism, the old version is
only locked with variable protection, new version will lock from start to
end with these 2 function.
2. f81232_set_baudrate() add error handling and no longer handle with baudrate
B0, change to handle with f81232_set_termios()
3. When user set baudrate larger then 115200, we will change it with 115200
and tty_encode_baud_rate() in f81232_set_termios().
4. V7 f81232_set_baudrate() divisor declared with type u8, it will make
baudrate set failed with smaller then B600 (115200/300=384 overflow :Q).
We changed it with integer type for divisor larger then 256.
V7 (old change):
1. The buffer of usb_control_msg() in set_register()/get_register() are change
from local variable to kmalloc(). (PATCH V7 02/11)
2. Change all set_register()/get_register() return value 0 is success,
otherwise are failed. ( return 0 of usb_control_msg() treat as -EIO,
PATCH V7 02/11)
3. tty_port_tty_get() called only when DCD has changed. (PATCH V7 05/11)
4. remove likely()/unlikely() branch prediction.
5. Implement DTR/RTS control when baudrate B0. We drop DTR/RTS when B0,
otherwise enable it. (PATCH V7 08/11)
6. Change private struct line_control to modem_control with meanful.
(PATCH V7 06/11)
7. We confirmd MSR strange delta value is not locking-issue. The issue
maybe reproduce with set MCR & get MSR before IIR notice with MSR changed.
V6 (old change):
1. transform all function not to use private data as parameter, using
usb_serial_port instead.
2. process_read_urb() add process of Break/FrameError/ParityError/OE.
(patch: 03/10)
3. fix calc_baud_divisor() will cause divide by zero with B0. (patch: 04/10)
4. Some init step we extract it from set_termios() to f81232_port_init()
and run it when open port only. (patch: 04/10)
5. We'll force re-read msr in tiocmget() because the IIR with MSR change
maybe delay received. (patch: 05/10)
6. fix MSR status bits changed but delta bits is 0 will cause read serial port
malfunctional with update port status. (patch: 08/10)
7. Add MSR change statistic when MSR has been read. (patch: 09/10)
8. clarify a lot of code about Johan suggested.
Peter Hung (10):
USB: f81232: rename private struct member name
USB: f81232: implement RX bulk-in EP
USB: f81232: change lock mechanism
USB: f81232: implement read IIR/MSR with endpoint
USB: f81232: implement MCR/MSR function
USB: f81232: implement port enable/disable method
USB: f81232: implement set_termios()
USB: f81232: clarify f81232_ioctl() and fix
USB: f81232: cleanup non-used define
USB: f81232: modify/add author
drivers/usb/serial/f81232.c | 551 ++++++++++++++++++++++++++++++++++++--------
1 file changed, 453 insertions(+), 98 deletions(-)
--
1.9.1
Change private struct member name from line_status to modem_status.
It will store MSR for some functions used
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index c5dc233..669a2f2 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -47,7 +47,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
struct f81232_private {
spinlock_t lock;
u8 line_control;
- u8 line_status;
+ u8 modem_status;
};
static void f81232_update_line_status(struct usb_serial_port *port,
@@ -113,8 +113,8 @@ static void f81232_process_read_urb(struct urb *urb)
/* update line status */
spin_lock_irqsave(&priv->lock, flags);
- line_status = priv->line_status;
- priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+ line_status = priv->modem_status;
+ priv->modem_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
if (!urb->actual_length)
@@ -241,7 +241,7 @@ static void f81232_dtr_rts(struct usb_serial_port *port, int on)
static int f81232_carrier_raised(struct usb_serial_port *port)
{
struct f81232_private *priv = usb_get_serial_port_data(port);
- if (priv->line_status & UART_DCD)
+ if (priv->modem_status & UART_DCD)
return 1;
return 0;
}
--
1.9.1
The F81232 bulk-in is RX data + LSR channel, data format is
[LSR+Data][LSR+Data]..... , We had implemented in f81232_process_read_urb().
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 71 +++++++++++++++++++++++----------------------
1 file changed, 37 insertions(+), 34 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 669a2f2..25b1a47 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -23,6 +23,7 @@
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1934, 0x0706) },
@@ -104,44 +105,46 @@ exit:
static void f81232_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct f81232_private *priv = usb_get_serial_port_data(port);
unsigned char *data = urb->transfer_buffer;
- char tty_flag = TTY_NORMAL;
- unsigned long flags;
- u8 line_status;
- int i;
-
- /* update line status */
- spin_lock_irqsave(&priv->lock, flags);
- line_status = priv->modem_status;
- priv->modem_status &= ~UART_STATE_TRANSIENT_MASK;
- spin_unlock_irqrestore(&priv->lock, flags);
+ char tty_flag;
+ unsigned int i;
+ u8 lsr;
- if (!urb->actual_length)
+ if ((urb->actual_length < 2) || (urb->actual_length % 2))
return;
- /* break takes precedence over parity, */
- /* which takes precedence over framing errors */
- if (line_status & UART_BREAK_ERROR)
- tty_flag = TTY_BREAK;
- else if (line_status & UART_PARITY_ERROR)
- tty_flag = TTY_PARITY;
- else if (line_status & UART_FRAME_ERROR)
- tty_flag = TTY_FRAME;
- dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
-
- /* overrun is special, not associated with a char */
- if (line_status & UART_OVERRUN_ERROR)
- tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
-
- if (port->port.console && port->sysrq) {
- for (i = 0; i < urb->actual_length; ++i)
- if (!usb_serial_handle_sysrq_char(port, data[i]))
- tty_insert_flip_char(&port->port, data[i],
- tty_flag);
- } else {
- tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
- urb->actual_length);
+ /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */
+
+ for (i = 0; i < urb->actual_length; i += 2) {
+ tty_flag = TTY_NORMAL;
+ lsr = data[i];
+
+ if (lsr & UART_LSR_BRK_ERROR_BITS) {
+ if (lsr & UART_LSR_BI) {
+ tty_flag = TTY_BREAK;
+ port->icount.brk++;
+ usb_serial_handle_break(port);
+ } else if (lsr & UART_LSR_PE) {
+ tty_flag = TTY_PARITY;
+ port->icount.parity++;
+ } else if (lsr & UART_LSR_FE) {
+ tty_flag = TTY_FRAME;
+ port->icount.frame++;
+ }
+
+ if (lsr & UART_LSR_OE) {
+ port->icount.overrun++;
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ }
+
+ if (port->port.console && port->sysrq) {
+ if (usb_serial_handle_sysrq_char(port, data[i + 1]))
+ continue;
+ }
+
+ tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
}
tty_flip_buffer_push(&port->port);
--
1.9.1
The original driver lock with spin_lock_irqsave()/spin_unlock_irqrestore()
because of it's maybe used in interrupt context f81232_process_read_urb().
We had remove it from previous patch "implement RX bulk-in EP", so we can
change it from busying loop spin_lock to sleepable mutex_lock.
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 25b1a47..cf5b902 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -19,7 +19,7 @@
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -46,7 +46,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define UART_CTS 0x80
struct f81232_private {
- spinlock_t lock;
+ struct mutex lock;
u8 line_control;
u8 modem_status;
};
@@ -227,17 +227,16 @@ static void f81232_close(struct usb_serial_port *port)
static void f81232_dtr_rts(struct usb_serial_port *port, int on)
{
struct f81232_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
u8 control;
- spin_lock_irqsave(&priv->lock, flags);
+ mutex_lock(&priv->lock);
/* Change DTR and RTS */
if (on)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
else
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
control = priv->line_control;
- spin_unlock_irqrestore(&priv->lock, flags);
+ mutex_unlock(&priv->lock);
set_control_lines(port->serial->dev, control);
}
@@ -281,7 +280,7 @@ static int f81232_port_probe(struct usb_serial_port *port)
if (!priv)
return -ENOMEM;
- spin_lock_init(&priv->lock);
+ mutex_init(&priv->lock);
usb_set_serial_port_data(port, priv);
--
1.9.1
The interrupt endpoint will report current IIR. If we got IIR with MSR changed
, We will do read MSR with interrupt_work worker to do f81232_read_msr()
function.
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 126 +++++++++++++++++++++++++++++++++++++++++---
1 file changed, 118 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index cf5b902..46a81ef 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -31,6 +31,13 @@ static const struct usb_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
+/* USB Control EP parameter */
+#define F81232_REGISTER_REQUEST 0xa0
+#define F81232_GET_REGISTER 0xc0
+
+#define SERIAL_BASE_ADDRESS 0x0120
+#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
+
#define CONTROL_DTR 0x01
#define CONTROL_RTS 0x02
@@ -49,19 +56,112 @@ struct f81232_private {
struct mutex lock;
u8 line_control;
u8 modem_status;
+ struct work_struct interrupt_work;
+ struct usb_serial_port *port;
};
+static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
+{
+ int status;
+ u8 *tmp;
+ struct usb_device *dev = port->serial->dev;
+
+ tmp = kmalloc(sizeof(*val), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ status = usb_control_msg(dev,
+ usb_rcvctrlpipe(dev, 0),
+ F81232_REGISTER_REQUEST,
+ F81232_GET_REGISTER,
+ reg,
+ 0,
+ tmp,
+ sizeof(u8),
+ USB_CTRL_GET_TIMEOUT);
+ if (status != sizeof(*val)) {
+ dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+ if (status == 0)
+ status = -EIO;
+ else
+ status = usb_translate_errors(status);
+ } else {
+ status = 0;
+ *val = *tmp;
+ }
+
+ kfree(tmp);
+ return status;
+}
+
+static void f81232_read_msr(struct usb_serial_port *port)
+{
+ int status;
+ u8 current_msr;
+ struct tty_struct *tty;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&priv->lock);
+ status = f81232_get_register(port, MODEM_STATUS_REGISTER,
+ ¤t_msr);
+ if (status) {
+ dev_err(&port->dev, "%s fail, status: %d\n", __func__, status);
+ mutex_unlock(&priv->lock);
+ return;
+ }
+
+ if (!(current_msr & UART_MSR_ANY_DELTA)) {
+ mutex_unlock(&priv->lock);
+ return;
+ }
+
+ priv->modem_status = current_msr;
+
+ if (current_msr & UART_MSR_DCTS)
+ port->icount.cts++;
+ if (current_msr & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (current_msr & UART_MSR_TERI)
+ port->icount.rng++;
+ if (current_msr & UART_MSR_DDCD) {
+ port->icount.dcd++;
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ usb_serial_handle_dcd_change(port, tty,
+ current_msr & UART_MSR_DCD);
+
+ tty_kref_put(tty);
+ }
+ }
+
+ wake_up_interruptible(&port->port.delta_msr_wait);
+ mutex_unlock(&priv->lock);
+}
+
static void f81232_update_line_status(struct usb_serial_port *port,
unsigned char *data,
- unsigned int actual_length)
+ size_t actual_length)
{
- /*
- * FIXME: Update port->icount, and call
- *
- * wake_up_interruptible(&port->port.delta_msr_wait);
- *
- * on MSR changes.
- */
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ if (!actual_length)
+ return;
+
+ switch (data[0] & 0x07) {
+ case 0x00: /* msr change */
+ dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]);
+ schedule_work(&priv->interrupt_work);
+ break;
+ case 0x02: /* tx-empty */
+ break;
+ case 0x04: /* rx data available */
+ break;
+ case 0x06: /* lsr change */
+ /* we can forget it. the LSR will read from bulk-in */
+ dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]);
+ break;
+ }
}
static void f81232_read_int_callback(struct urb *urb)
@@ -272,6 +372,14 @@ static int f81232_ioctl(struct tty_struct *tty,
return -ENOIOCTLCMD;
}
+static void f81232_interrupt_work(struct work_struct *work)
+{
+ struct f81232_private *priv =
+ container_of(work, struct f81232_private, interrupt_work);
+
+ f81232_read_msr(priv->port);
+}
+
static int f81232_port_probe(struct usb_serial_port *port)
{
struct f81232_private *priv;
@@ -281,10 +389,12 @@ static int f81232_port_probe(struct usb_serial_port *port)
return -ENOMEM;
mutex_init(&priv->lock);
+ INIT_WORK(&priv->interrupt_work, f81232_interrupt_work);
usb_set_serial_port_data(port, priv);
port->port.drain_delay = 256;
+ priv->port = port;
return 0;
}
--
1.9.1
This patch implement relative MCR/MSR function, such like
tiocmget()/tiocmset()/dtr_rts()/carrier_raised()
original f81232_carrier_raised() compared with wrong value UART_DCD.
It's should compared with UART_MSR_DCD.
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 139 +++++++++++++++++++++++++++++++++++++-------
1 file changed, 117 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 46a81ef..b70f9b9 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -34,8 +34,10 @@ MODULE_DEVICE_TABLE(usb, id_table);
/* USB Control EP parameter */
#define F81232_REGISTER_REQUEST 0xa0
#define F81232_GET_REGISTER 0xc0
+#define F81232_SET_REGISTER 0x40
#define SERIAL_BASE_ADDRESS 0x0120
+#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
#define CONTROL_DTR 0x01
@@ -54,7 +56,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
struct f81232_private {
struct mutex lock;
- u8 line_control;
+ u8 modem_control;
u8 modem_status;
struct work_struct interrupt_work;
struct usb_serial_port *port;
@@ -95,6 +97,42 @@ static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
return status;
}
+static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
+{
+ int status;
+ u8 *tmp;
+ struct usb_device *dev = port->serial->dev;
+
+ tmp = kmalloc(sizeof(val), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ *tmp = val;
+
+ status = usb_control_msg(dev,
+ usb_sndctrlpipe(dev, 0),
+ F81232_REGISTER_REQUEST,
+ F81232_SET_REGISTER,
+ reg,
+ 0,
+ tmp,
+ sizeof(u8),
+ USB_CTRL_SET_TIMEOUT);
+ if (status != sizeof(val)) {
+ dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+ if (status == 0)
+ status = -EIO;
+ else
+ status = usb_translate_errors(status);
+ } else {
+ status = 0;
+ }
+
+ kfree(tmp);
+ return status;
+}
+
static void f81232_read_msr(struct usb_serial_port *port)
{
int status;
@@ -139,6 +177,51 @@ static void f81232_read_msr(struct usb_serial_port *port)
mutex_unlock(&priv->lock);
}
+static int f81232_set_mctrl(struct usb_serial_port *port,
+ unsigned int set, unsigned int clear)
+{
+ u8 urb_value;
+ int status;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+ return 0; /* no change */
+
+ /* 'set' takes precedence over 'clear' */
+ clear &= ~set;
+
+ /* force enable interrupt with OUT2 */
+ mutex_lock(&priv->lock);
+ urb_value = UART_MCR_OUT2 | priv->modem_control;
+
+ if (clear & TIOCM_DTR)
+ urb_value &= ~UART_MCR_DTR;
+
+ if (clear & TIOCM_RTS)
+ urb_value &= ~UART_MCR_RTS;
+
+ if (set & TIOCM_DTR)
+ urb_value |= UART_MCR_DTR;
+
+ if (set & TIOCM_RTS)
+ urb_value |= UART_MCR_RTS;
+
+ dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+ urb_value, priv->modem_control);
+
+ status = f81232_set_register(port, MODEM_CONTROL_REGISTER, urb_value);
+ if (status) {
+ dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+ mutex_unlock(&priv->lock);
+ return status;
+ }
+
+ priv->modem_control = urb_value;
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
static void f81232_update_line_status(struct usb_serial_port *port,
unsigned char *data,
size_t actual_length)
@@ -250,12 +333,6 @@ static void f81232_process_read_urb(struct urb *urb)
tty_flip_buffer_push(&port->port);
}
-static int set_control_lines(struct usb_device *dev, u8 value)
-{
- /* FIXME - Stubbed out for now */
- return 0;
-}
-
static void f81232_break_ctl(struct tty_struct *tty, int break_state)
{
/* FIXME - Stubbed out for now */
@@ -283,15 +360,35 @@ static void f81232_set_termios(struct tty_struct *tty,
static int f81232_tiocmget(struct tty_struct *tty)
{
- /* FIXME - Stubbed out for now */
- return 0;
+ int r;
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81232_private *port_priv = usb_get_serial_port_data(port);
+ u8 mcr, msr;
+
+ /* force get current MSR changed state */
+ f81232_read_msr(port);
+
+ mutex_lock(&port_priv->lock);
+ mcr = port_priv->modem_control;
+ msr = port_priv->modem_status;
+ mutex_unlock(&port_priv->lock);
+
+ r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+ (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+ (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+ (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+ (msr & UART_MSR_RI ? TIOCM_RI : 0) |
+ (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+ return r;
}
static int f81232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
- /* FIXME - Stubbed out for now */
- return 0;
+ struct usb_serial_port *port = tty->driver_data;
+
+ return f81232_set_mctrl(port, set, clear);
}
static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -326,24 +423,22 @@ static void f81232_close(struct usb_serial_port *port)
static void f81232_dtr_rts(struct usb_serial_port *port, int on)
{
- struct f81232_private *priv = usb_get_serial_port_data(port);
- u8 control;
-
- mutex_lock(&priv->lock);
- /* Change DTR and RTS */
if (on)
- priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+ f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
else
- priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- control = priv->line_control;
- mutex_unlock(&priv->lock);
- set_control_lines(port->serial->dev, control);
+ f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
}
static int f81232_carrier_raised(struct usb_serial_port *port)
{
+ u8 msr;
struct f81232_private *priv = usb_get_serial_port_data(port);
- if (priv->modem_status & UART_DCD)
+
+ mutex_lock(&priv->lock);
+ msr = priv->modem_status;
+ mutex_unlock(&priv->lock);
+
+ if (msr & UART_MSR_DCD)
return 1;
return 0;
}
--
1.9.1
We put FCR/IER initial step to f81232_port_enable()/f81232_port_disable().
When port is open, it set MSR interrupt on. Otherwise set it off.
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 49 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index b70f9b9..a3f9530 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -37,6 +37,8 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define F81232_SET_REGISTER 0x40
#define SERIAL_BASE_ADDRESS 0x0120
+#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
@@ -344,6 +346,48 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
*/
}
+static int f81232_port_enable(struct usb_serial_port *port)
+{
+ u8 val;
+ int status;
+
+ /* fifo on, trigger8, clear TX/RX*/
+ val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT;
+
+ status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set FCR: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ /* MSR Interrupt only, LSR will read from Bulk-in odd byte */
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+ UART_IER_MSI);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set IER: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
+static int f81232_port_disable(struct usb_serial_port *port)
+{
+ int status;
+
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set IER: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
static void f81232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -395,6 +439,10 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result;
+ result = f81232_port_enable(port);
+ if (result)
+ return result;
+
/* Setup termios */
if (tty)
f81232_set_termios(tty, port, NULL);
@@ -417,6 +465,7 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
static void f81232_close(struct usb_serial_port *port)
{
+ f81232_port_disable(port);
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
}
--
1.9.1
The original driver had do not any h/w change in driver.
This patch implements with configure H/W for
baud/parity/word length/stop bits functional in f81232_set_termios().
This patch also implement DTR/RTS control when baudrate B0.
We drop DTR/RTS when B0, otherwise enable it.
We are checking baudrate in set_termios() too, If baudrate larger then 115200,
it will be changed to 115200 and use tty_encode_baud_rate() to encode into tty
f81232_set_baudrate() is also changed from V7. Add error handling when LCR get
failed or set LCR UART_LCR_DLAB failed. and older version, divisor is declared
with u8, it's will make failed with baudrate lower than 600 (115200/300=384).
We had changed divisor to int type.
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 112 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 108 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index a3f9530..0580195 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -31,14 +31,19 @@ static const struct usb_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
+/* Maximum baudrate for F81232 */
+#define F81232_MAX_BAUDRATE 115200
+
/* USB Control EP parameter */
#define F81232_REGISTER_REQUEST 0xa0
#define F81232_GET_REGISTER 0xc0
#define F81232_SET_REGISTER 0x40
#define SERIAL_BASE_ADDRESS 0x0120
+#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS)
#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
@@ -64,6 +69,11 @@ struct f81232_private {
struct usb_serial_port *port;
};
+static int calc_baud_divisor(speed_t baudrate)
+{
+ return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate);
+}
+
static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
{
int status;
@@ -346,6 +356,53 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
*/
}
+static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
+{
+ u8 lcr;
+ int divisor, status = 0;
+
+ divisor = calc_baud_divisor(baudrate);
+
+ status = f81232_get_register(port, LINE_CONTROL_REGISTER,
+ &lcr); /* get LCR */
+ if (status) {
+ dev_err(&port->dev, "%s failed to get LCR: %d\n",
+ __func__, status);
+ return;
+ }
+
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+ lcr | UART_LCR_DLAB); /* Enable DLAB */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+ __func__, status);
+ return;
+ }
+
+ status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
+ divisor & 0x00ff); /* low */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
+ __func__, status);
+ goto reapply_lcr;
+ }
+
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+ (divisor & 0xff00) >> 8); /* high */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
+ __func__, status);
+ }
+
+reapply_lcr:
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+ lcr & ~UART_LCR_DLAB);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+ __func__, status);
+ }
+}
+
static int f81232_port_enable(struct usb_serial_port *port)
{
u8 val;
@@ -391,15 +448,62 @@ static int f81232_port_disable(struct usb_serial_port *port)
static void f81232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- /* FIXME - Stubbed out for now */
+ u8 new_lcr = 0;
+ int status = 0;
+ speed_t baudrate;
/* Don't change anything if nothing has changed */
if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
- /* Do the real work here... */
- if (old_termios)
- tty_termios_copy_hw(&tty->termios, old_termios);
+ if (C_BAUD(tty) == B0)
+ f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+ baudrate = tty_get_baud_rate(tty);
+ if (baudrate > 0) {
+ if (baudrate > F81232_MAX_BAUDRATE)
+ baudrate = F81232_MAX_BAUDRATE;
+
+ tty_encode_baud_rate(tty, baudrate, baudrate);
+ f81232_set_baudrate(port, baudrate);
+ }
+
+ if (C_PARENB(tty)) {
+ new_lcr |= UART_LCR_PARITY;
+
+ if (!C_PARODD(tty))
+ new_lcr |= UART_LCR_EPAR;
+
+ if (C_CMSPAR(tty))
+ new_lcr |= UART_LCR_SPAR;
+ }
+
+ if (C_CSTOPB(tty))
+ new_lcr |= UART_LCR_STOP;
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ new_lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ new_lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ new_lcr |= UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ new_lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
+ if (status)
+ dev_err(&port->dev, "%s failed to set LCR: %d\n",
+ __func__, status);
+
}
static int f81232_tiocmget(struct tty_struct *tty)
--
1.9.1
We extract TIOCGSERIAL section in f81232_ioctl() to f81232_get_serial_info()
to make it clarify.
Also we fix device type from 16654 to 16550A, and set it's baud_base
to 115200 (1.8432MHz/16).
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 30 +++++++++++++++++++-----------
1 file changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 0580195..21f2342 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -596,24 +596,32 @@ static int f81232_carrier_raised(struct usb_serial_port *port)
return 0;
}
+static int f81232_get_serial_info(struct usb_serial_port *port,
+ unsigned long arg)
+{
+ struct serial_struct ser;
+
+ memset(&ser, 0, sizeof(ser));
+
+ ser.type = PORT_16550A;
+ ser.line = port->minor;
+ ser.port = port->port_number;
+ ser.baud_base = 115200;
+
+ if (copy_to_user((void __user *)arg, &ser, sizeof(ser)))
+ return -EFAULT;
+
+ return 0;
+}
+
static int f81232_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
- struct serial_struct ser;
struct usb_serial_port *port = tty->driver_data;
switch (cmd) {
case TIOCGSERIAL:
- memset(&ser, 0, sizeof ser);
- ser.type = PORT_16654;
- ser.line = port->minor;
- ser.port = port->port_number;
- ser.baud_base = 460800;
-
- if (copy_to_user((void __user *)arg, &ser, sizeof ser))
- return -EFAULT;
-
- return 0;
+ return f81232_get_serial_info(port, arg);
default:
break;
}
--
1.9.1
We remove non-used define in this patch to avoid wrong usage.
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 21f2342..0b7b69a 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -47,20 +47,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
-#define CONTROL_DTR 0x01
-#define CONTROL_RTS 0x02
-
-#define UART_STATE 0x08
-#define UART_STATE_TRANSIENT_MASK 0x74
-#define UART_DCD 0x01
-#define UART_DSR 0x02
-#define UART_BREAK_ERROR 0x04
-#define UART_RING 0x08
-#define UART_FRAME_ERROR 0x10
-#define UART_PARITY_ERROR 0x20
-#define UART_OVERRUN_ERROR 0x40
-#define UART_CTS 0x80
-
struct f81232_private {
struct mutex lock;
u8 modem_control;
--
1.9.1
Add me to co-author and fix no '>' in greg kh's email
Signed-off-by: Peter Hung <[email protected]>
---
drivers/usb/serial/f81232.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 0b7b69a..65d5cf6 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -684,5 +684,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
-MODULE_AUTHOR("Greg Kroah-Hartman <[email protected]");
+MODULE_AUTHOR("Greg Kroah-Hartman <[email protected]>");
+MODULE_AUTHOR("Peter Hong <[email protected]>");
MODULE_LICENSE("GPL v2");
--
1.9.1