In our effort to support vendors writing drivers for their own
sensors we introduce IIO documentation in DocBook format.
It documents Industrial I/O core including IIO devices, buffers, triggers and
triggered buffers. It also offers a short list of online resources
for the IIO subsystem.
This is far from being complete any suggestions are welcomed. At a first
glance we also need to add documentation for events. We are also working
on auto-generating template drivers based on the type of the IIO sensors.
Generated html files should be available online here http://dbaluta.github.io/
or you could run make htmldocs in the root of your kernel repo to get them.
Changes since v4:
* addressed feedback from Peter Meerwald
* http://marc.info/?l=linux-iio&m=143859386402036&w=2
Changes since v3:
* addressed feedback from Crt Mori
* http://marc.info/?l=linux-iio&m=143815719008296&w=2
Changes since v2:
* addressed feedback from Lars-Peter
* http://marc.info/?l=linux-iio&m=143774991802816&w=2
* Many thanks to Lars-Peter Clausen for scan_index paragraph.
Changes since v1:
* mostly typos and clarifications
* addressed comments from Jonathan Corbet and Jonathan Cameron
* http://marc.info/?l=linux-iio&m=143704226629498&w=2
* http://marc.info/?l=linux-iio&m=143707511006898&w=2
* for DocBook warnings reported by Randy, Cristina sent
this patchseries:
http://marc.info/?l=linux-iio&m=143774363900903&w=2
Daniel Baluta (1):
DocBook: Add initial documentation for IIO
Documentation/DocBook/Makefile | 2 +-
Documentation/DocBook/iio.tmpl | 697 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 698 insertions(+), 1 deletion(-)
create mode 100644 Documentation/DocBook/iio.tmpl
--
1.9.1
This is intended to help developers faster find their way
inside the Industrial I/O core and reduce time spent on IIO
drivers development.
Signed-off-by: Daniel Baluta <[email protected]>
Acked-by: Crt Mori <[email protected]>
Reviewed-by: Lars-Peter Clausen <[email protected]>
---
Documentation/DocBook/Makefile | 2 +-
Documentation/DocBook/iio.tmpl | 697 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 698 insertions(+), 1 deletion(-)
create mode 100644 Documentation/DocBook/iio.tmpl
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index b6a6a2e..9e08606 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -15,7 +15,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
80211.xml debugobjects.xml sh.xml regulator.xml \
alsa-driver-api.xml writing-an-alsa-driver.xml \
tracepoint.xml drm.xml media_api.xml w1.xml \
- writing_musb_glue_layer.xml crypto-API.xml
+ writing_musb_glue_layer.xml crypto-API.xml iio.xml
include Documentation/DocBook/media/Makefile
diff --git a/Documentation/DocBook/iio.tmpl b/Documentation/DocBook/iio.tmpl
new file mode 100644
index 0000000..06bb53d
--- /dev/null
+++ b/Documentation/DocBook/iio.tmpl
@@ -0,0 +1,697 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="iioid">
+ <bookinfo>
+ <title>Industrial I/O driver developer's guide </title>
+
+ <authorgroup>
+ <author>
+ <firstname>Daniel</firstname>
+ <surname>Baluta</surname>
+ <affiliation>
+ <address>
+ <email>[email protected]</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <copyright>
+ <year>2015</year>
+ <holder>Intel Corporation</holder>
+ </copyright>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+
+ <chapter id="intro">
+ <title>Introduction</title>
+ <para>
+ The main purpose of the Industrial I/O subsystem (IIO) is to provide
+ support for devices that in some sense perform either analog-to-digital
+ conversion (ADC) or digital-to-analog conversion (DAC) or both. The aim
+ is to fill the gap between the somewhat similar hwmon and input
+ subsystems.
+ Hwmon is directed at low sample rate sensors used to monitor and
+ control the system itself, like fan speed control or temperature
+ measurement. Input is, as its name suggests, focused on human interaction
+ input devices (keyboard, mouse, touchscreen). In some cases there is
+ considerable overlap between these and IIO.
+ </para>
+ <para>
+ Devices that fall into this category include:
+ <itemizedlist>
+ <listitem>
+ analog to digital converters (ADCs)
+ </listitem>
+ <listitem>
+ accelerometers
+ </listitem>
+ <listitem>
+ capacitance to digital converters (CDCs)
+ </listitem>
+ <listitem>
+ digital to analog converters (DACs)
+ </listitem>
+ <listitem>
+ gyroscopes
+ </listitem>
+ <listitem>
+ inertial measurement units (IMUs)
+ </listitem>
+ <listitem>
+ color and light sensors
+ </listitem>
+ <listitem>
+ magnetometers
+ </listitem>
+ <listitem>
+ pressure sensors
+ </listitem>
+ <listitem>
+ proximity sensors
+ </listitem>
+ <listitem>
+ temperature sensors
+ </listitem>
+ </itemizedlist>
+ Usually these sensors are connected via SPI or I2C. A common use case of the
+ sensors devices is to have combined functionality (e.g. light plus proximity
+ sensor).
+ </para>
+ </chapter>
+ <chapter id='iiosubsys'>
+ <title>Industrial I/O core</title>
+ <para>
+ The Industrial I/O core offers:
+ <itemizedlist>
+ <listitem>
+ a unified framework for writing drivers for many different types of
+ embedded sensors.
+ </listitem>
+ <listitem>
+ a standard interface to user space applications manipulating sensors.
+ </listitem>
+ </itemizedlist>
+ The implementation can be found under <filename>
+ drivers/iio/industrialio-*</filename>
+ </para>
+ <sect1 id="iiodevice">
+ <title> Industrial I/O devices </title>
+
+!Finclude/linux/iio/iio.h iio_dev
+!Fdrivers/iio/industrialio-core.c iio_device_alloc
+!Fdrivers/iio/industrialio-core.c iio_device_free
+!Fdrivers/iio/industrialio-core.c iio_device_register
+!Fdrivers/iio/industrialio-core.c iio_device_unregister
+
+ <para>
+ An IIO device usually corresponds to a single hardware sensor and it
+ provides all the information needed by a driver handling a device.
+ Let's first have a look at the functionality embedded in an IIO
+ device then we will show how a device driver makes use of an IIO
+ device.
+ </para>
+ <para>
+ There are two ways for a user space application to interact
+ with an IIO driver.
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/</filename>, this
+ represents a hardware sensor and groups together the data
+ channels of the same chip.
+ </listitem>
+ <listitem>
+ <filename>/dev/iio:deviceX</filename>, character device node
+ interface used for buffered data transfer and for events information
+ retrieval.
+ </listitem>
+ </itemizedlist>
+ </para>
+ A typical IIO driver will register itself as an I2C or SPI driver and will
+ create two routines, <function> probe </function> and <function> remove
+ </function>. At <function>probe</function>:
+ <itemizedlist>
+ <listitem>call <function>iio_device_alloc</function>, which allocates memory
+ for an IIO device.
+ </listitem>
+ <listitem> initialize IIO device fields with driver specific information
+ (e.g. device name, device channels).
+ </listitem>
+ <listitem>call <function> iio_device_register</function>, this registers the
+ device with the IIO core. After this call the device is ready to accept
+ requests from user space applications.
+ </listitem>
+ </itemizedlist>
+ At <function>remove</function>, we free the resources allocated in
+ <function>probe</function> in reverse order:
+ <itemizedlist>
+ <listitem><function>iio_device_unregister</function>, unregister the device
+ from the IIO core.
+ </listitem>
+ <listitem><function>iio_device_free</function>, free the memory allocated
+ for the IIO device.
+ </listitem>
+ </itemizedlist>
+
+ <sect2 id="iioattr"> <title> IIO device sysfs interface </title>
+ <para>
+ Attributes are sysfs files used to expose chip info and also allowing
+ applications to set various configuration parameters. For device
+ with index X, attributes can be found under
+ <filename>/sys/bus/iio/iio:deviceX/ </filename> directory.
+ Common attributes are:
+ <itemizedlist>
+ <listitem><filename>name</filename>, description of the physical
+ chip.
+ </listitem>
+ <listitem><filename>dev</filename>, shows the major:minor pair
+ associated with <filename>/dev/iio:deviceX</filename> node.
+ </listitem>
+ <listitem><filename>sampling_frequency_available</filename>,
+ available discrete set of sampling frequency values for
+ device.
+ </listitem>
+ </itemizedlist>
+ Available standard attributes for IIO devices are described in the
+ <filename>Documentation/ABI/testing/sysfs-bus-iio </filename> file
+ in the Linux kernel sources.
+ </para>
+ </sect2>
+ <sect2 id="iiochannel"> <title> IIO device channels </title>
+!Finclude/linux/iio/iio.h iio_chan_spec structure.
+ <para>
+ An IIO device channel is a representation of a data channel. An
+ IIO device can have one or multiple channels. For example:
+ <itemizedlist>
+ <listitem>
+ a thermometer sensor has one channel representing the
+ temperature measurement.
+ </listitem>
+ <listitem>
+ a light sensor with two channels indicating the measurements in
+ the visible and infrared spectrum.
+ </listitem>
+ <listitem>
+ an accelerometer can have up to 3 channels representing
+ acceleration on X, Y and Z axes.
+ </listitem>
+ </itemizedlist>
+ An IIO channel is described by the <type> struct iio_chan_spec
+ </type>. A thermometer driver for the temperature sensor in the
+ example above would have to describe its channel as follows:
+ <programlisting>
+ static const struct iio_chan_spec temp_channel[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+ };
+
+ </programlisting>
+ Channel sysfs attributes exposed to userspace are specified in
+ the form of <emphasis>bitmasks</emphasis>. Depending on their
+ shared info, attributes can be set in one of the following masks:
+ <itemizedlist>
+ <listitem><emphasis>info_mask_separate</emphasis>, attributes will
+ be specific to this channel</listitem>
+ <listitem><emphasis>info_mask_shared_by_type</emphasis>,
+ attributes are shared by all channels of the same type</listitem>
+ <listitem><emphasis>info_mask_shared_by_dir</emphasis>, attributes
+ are shared by all channels of the same direction </listitem>
+ <listitem><emphasis>info_mask_shared_by_all</emphasis>,
+ attributes are shared by all channels</listitem>
+ </itemizedlist>
+ When there are multiple data channels per channel type we have two
+ ways to distinguish between them:
+ <itemizedlist>
+ <listitem> set <emphasis> .modified</emphasis> field of <type>
+ iio_chan_spec</type> to 1. Modifiers are specified using
+ <emphasis>.channel2</emphasis> field of the same
+ <type>iio_chan_spec</type> structure and are used to indicate a
+ physically unique characteristic of the channel such as its direction
+ or spectral response. For example, a light sensor can have two channels,
+ one for infrared light and one for both infrared and visible light.
+ </listitem>
+ <listitem> set <emphasis>.indexed </emphasis> field of
+ <type>iio_chan_spec</type> to 1. In this case the channel is
+ simply another instance with an index specified by the
+ <emphasis>.channel</emphasis> field.
+ </listitem>
+ </itemizedlist>
+ Here is how we can make use of the channel's modifiers:
+ <programlisting>
+ static const struct iio_chan_spec light_channels[] = {
+ {
+ .type = IIO_INTENSITY,
+ .modified = 1,
+ .channel2 = IIO_MOD_LIGHT_IR,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ {
+ .type = IIO_INTENSITY,
+ .modified = 1,
+ .channel2 = IIO_MOD_LIGHT_BOTH,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+
+ }
+ </programlisting>
+ This channel's definition will generate two separate sysfs files
+ for raw data retrieval:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_intensity_ir_raw</filename>
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_intensity_both_raw</filename>
+ </listitem>
+ </itemizedlist>
+ one file for processed data:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/in_illuminance_input
+ </filename>
+ </listitem>
+ </itemizedlist>
+ and one shared sysfs file for sampling frequency:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/iio:deviceX/sampling_frequency.
+ </filename>
+ </listitem>
+ </itemizedlist>
+ </para>
+ <para>
+ Here is how we can make use of the channel's indexing:
+ <programlisting>
+ static const struct iio_chan_spec light_channels[] = {
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ },
+ }
+ </programlisting>
+ This will generate two separate attributes files for raw data
+ retrieval:
+ <itemizedlist>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage0_raw</filename>,
+ representing voltage measurement for channel 0.
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage1_raw</filename>,
+ representing voltage measurement for channel 1.
+ </listitem>
+ </itemizedlist>
+ </para>
+ </sect2>
+ </sect1>
+
+ <sect1 id="iiobuffer"> <title> Industrial I/O buffers </title>
+!Finclude/linux/iio/buffer.h iio_buffer
+!Edrivers/iio/industrialio-buffer.c
+
+ <para>
+ The Industrial I/O core offers a way for continuous data capture
+ based on a trigger source. Multiple data channels can be read at once
+ from <filename>/dev/iio:deviceX</filename> character device node,
+ thus reducing the CPU load.
+ </para>
+
+ <sect2 id="iiobuffersysfs">
+ <title>IIO buffer sysfs interface </title>
+ <para>
+ An IIO buffer has an associated attributes directory under <filename>
+ /sys/bus/iio/iio:deviceX/buffer/</filename>. Here are the existing
+ attributes:
+ <itemizedlist>
+ <listitem>
+ <emphasis>length</emphasis>, the total number of data samples
+ (capacity) that can be stored by the buffer.
+ </listitem>
+ <listitem>
+ <emphasis>enable</emphasis>, activate buffer capture.
+ </listitem>
+ </itemizedlist>
+
+ </para>
+ </sect2>
+ <sect2 id="iiobuffersetup"> <title> IIO buffer setup </title>
+ <para>The meta information associated with a channel reading
+ placed in a buffer is called a <emphasis> scan element </emphasis>.
+ The important bits configuring scan elements are exposed to
+ userspace applications via the <filename>
+ /sys/bus/iio/iio:deviceX/scan_elements/</filename> directory. This
+ file contains attributes of the following form:
+ <itemizedlist>
+ <listitem><emphasis>enable</emphasis>, used for enabling a channel.
+ If and only if its attribute is non zero, then a triggered capture
+ will contain data samples for this channel.
+ </listitem>
+ <listitem><emphasis>type</emphasis>, description of the scan element
+ data storage within the buffer and hence the form in which it is
+ read from user space. Format is <emphasis>
+ [be|le]:[s|u]bits/storagebitsXrepeat[>>shift] </emphasis>.
+ <itemizedlist>
+ <listitem> <emphasis>be</emphasis> or <emphasis>le</emphasis>, specifies
+ big or little endian.
+ </listitem>
+ <listitem>
+ <emphasis>s </emphasis>or <emphasis>u</emphasis>, specifies if
+ signed (2's complement) or unsigned.
+ </listitem>
+ <listitem><emphasis>bits</emphasis>, is the number of valid data
+ bits.
+ </listitem>
+ <listitem><emphasis>storagebits</emphasis>, is the number of bits
+ (after padding) that it occupies in the buffer.
+ </listitem>
+ <listitem>
+ <emphasis>shift</emphasis>, if specified, is the shift that needs
+ to be applied prior to masking out unused bits.
+ </listitem>
+ <listitem>
+ <emphasis>repeat</emphasis>, specifies the number of bits/storagebits
+ repetitions. When the repeat element is 0 or 1, then the repeat
+ value is omitted.
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ </itemizedlist>
+ For example, a driver for a 3-axis accelerometer with 12 bit
+ resolution where data is stored in two 8-bits registers as
+ follows:
+ <programlisting>
+ 7 6 5 4 3 2 1 0
+ +---+---+---+---+---+---+---+---+
+ |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06)
+ +---+---+---+---+---+---+---+---+
+
+ 7 6 5 4 3 2 1 0
+ +---+---+---+---+---+---+---+---+
+ |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07)
+ +---+---+---+---+---+---+---+---+
+ </programlisting>
+
+ will have the following scan element type for each axis:
+ <programlisting>
+ $ cat /sys/bus/iio/devices/iio:device0/scan_elements/in_accel_y_type
+ le:s12/16>>4
+ </programlisting>
+ A user space application will interpret data samples read from the
+ buffer as two byte little endian signed data, that needs a 4 bits
+ right shift before masking out the 12 valid bits of data.
+ </para>
+ <para>
+ For implementing buffer support a driver should initialize the following
+ fields in <type>iio_chan_spec</type> definition:
+ <programlisting>
+ struct iio_chan_spec {
+ /* other members */
+ int scan_index
+ struct {
+ char sign;
+ u8 realbits;
+ u8 storagebits;
+ u8 shift;
+ u8 repeat;
+ enum iio_endian endianness;
+ } scan_type;
+ };
+ </programlisting>
+ The driver implementing the accelerometer described above will
+ have the following channel definition:
+ <programlisting>
+ struct struct iio_chan_spec accel_channels[] = {
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X,
+ /* other stuff here */
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 12,
+ .storgebits = 16,
+ .shift = 4,
+ .endianness = IIO_LE,
+ },
+ }
+ /* similar for Y (with channel2 = IIO_MOD_Y, scan_index = 1)
+ * and Z (with channel2 = IIO_MOD_Z, scan_index = 2) axis
+ */
+ }
+ </programlisting>
+ </para>
+ <para>
+ Here <emphasis> scan_index </emphasis> defines the order in which
+ the enabled channels are placed inside the buffer. Channels with a lower
+ scan_index will be placed before channels with a higher index. Each
+ channel needs to have a unique scan_index.
+ </para>
+ <para>
+ Setting scan_index to -1 can be used to indicate that the specific
+ channel does not support buffered capture. In this case no entries will
+ be created for the channel in the scan_elements directory.
+ </para>
+ </sect2>
+ </sect1>
+
+ <sect1 id="iiotrigger"> <title> Industrial I/O triggers </title>
+!Finclude/linux/iio/trigger.h iio_trigger
+!Edrivers/iio/industrialio-trigger.c
+ <para>
+ In many situations it is useful for a driver to be able to
+ capture data based on some external event (trigger) as opposed
+ to periodically polling for data. An IIO trigger can be provided
+ by a device driver that also has an IIO device based on hardware
+ generated events (e.g. data ready or threshold exceeded) or
+ provided by a separate driver from an independent interrupt
+ source (e.g. GPIO line connected to some external system, timer
+ interrupt or user space writing a specific file in sysfs). A
+ trigger may initiate data capture for a number of sensors and
+ also it may be completely unrelated to the sensor itself.
+ </para>
+
+ <sect2 id="iiotrigsysfs"> <title> IIO trigger sysfs interface </title>
+ There are two locations in sysfs related to triggers:
+ <itemizedlist>
+ <listitem><filename>/sys/bus/iio/devices/triggerY</filename>,
+ this file is created once an IIO trigger is registered with
+ the IIO core and corresponds to trigger with index Y. Because
+ triggers can be very different depending on type there are few
+ standard attributes that we can describe here:
+ <itemizedlist>
+ <listitem>
+ <emphasis>name</emphasis>, trigger name that can be later
+ used for association with a device.
+ </listitem>
+ <listitem>
+ <emphasis>sampling_frequency</emphasis>, some timer based
+ triggers use this attribute to specify the frequency for
+ trigger calls.
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem>
+ <filename>/sys/bus/iio/devices/iio:deviceX/trigger/</filename>, this
+ directory is created once the device supports a triggered
+ buffer. We can associate a trigger with our device by writing
+ the trigger's name in the <filename>current_trigger</filename> file.
+ </listitem>
+ </itemizedlist>
+ </sect2>
+
+ <sect2 id="iiotrigattr"> <title> IIO trigger setup</title>
+
+ <para>
+ Let's see a simple example of how to setup a trigger to be used
+ by a driver.
+
+ <programlisting>
+ struct iio_trigger_ops trigger_ops = {
+ .set_trigger_state = sample_trigger_state,
+ .validate_device = sample_validate_device,
+ }
+
+ struct iio_trigger *trig;
+
+ /* first, allocate memory for our trigger */
+ trig = iio_trigger_alloc(dev, "trig-%s-%d", name, idx);
+
+ /* setup trigger operations field */
+ trig->ops = &trigger_ops;
+
+ /* now register the trigger with the IIO core */
+ iio_trigger_register(trig);
+ </programlisting>
+ </para>
+ </sect2>
+
+ <sect2 id="iiotrigsetup"> <title> IIO trigger ops</title>
+!Finclude/linux/iio/trigger.h iio_trigger_ops
+ <para>
+ Notice that a trigger has a set of operations attached:
+ <itemizedlist>
+ <listitem>
+ <function>set_trigger_state</function>, switch the trigger on/off
+ on demand.
+ </listitem>
+ <listitem>
+ <function>validate_device</function>, function to validate the
+ device when the current trigger gets changed.
+ </listitem>
+ </itemizedlist>
+ </para>
+ </sect2>
+ </sect1>
+ <sect1 id="iiotriggered_buffer">
+ <title> Industrial I/O triggered buffers </title>
+ <para>
+ Now that we know what buffers and triggers are let's see how they
+ work together.
+ </para>
+ <sect2 id="iiotrigbufsetup"> <title> IIO triggered buffer setup</title>
+!Edrivers/iio/industrialio-triggered-buffer.c
+!Finclude/linux/iio/iio.h iio_buffer_setup_ops
+
+
+ <para>
+ A typical triggered buffer setup looks like this:
+ <programlisting>
+ const struct iio_buffer_setup_ops sensor_buffer_setup_ops = {
+ .preenable = sensor_buffer_preenable,
+ .postenable = sensor_buffer_postenable,
+ .postdisable = sensor_buffer_postdisable,
+ .predisable = sensor_buffer_predisable,
+ };
+
+ irqreturn_t sensor_iio_pollfunc(int irq, void *p)
+ {
+ pf->timestamp = iio_get_time_ns();
+ return IRQ_WAKE_THREAD;
+ }
+
+ irqreturn_t sensor_trigger_handler(int irq, void *p)
+ {
+ u16 buf[8];
+ int i = 0;
+
+ /* read data for each active channel */
+ for_each_set_bit(bit, active_scan_mask, masklength)
+ buf[i++] = sensor_get_data(bit)
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buf, timestamp);
+
+ iio_trigger_notify_done(trigger);
+ return IRQ_HANDLED;
+ }
+
+ /* setup triggered buffer, usually in probe function */
+ iio_triggered_buffer_setup(indio_dev, sensor_iio_polfunc,
+ sensor_trigger_handler,
+ sensor_buffer_setup_ops);
+ </programlisting>
+ </para>
+ The important things to notice here are:
+ <itemizedlist>
+ <listitem><function> iio_buffer_setup_ops</function>, the buffer setup
+ functions to be called at predefined points in the buffer configuration
+ sequence (e.g. before enable, after disable). If not specified, the
+ IIO core uses the default <type>iio_triggered_buffer_setup_ops</type>.
+ </listitem>
+ <listitem><function>sensor_iio_pollfunc</function>, the function that
+ will be used as top half of poll function. It should do as little
+ processing as possible, because it runs in interrupt context. The most
+ common operation is recording of the current timestamp and for this reason
+ one can use the IIO core defined <function>iio_pollfunc_store_time
+ </function> function.
+ </listitem>
+ <listitem><function>sensor_trigger_handler</function>, the function that
+ will be used as bottom half of the poll function. This runs in the
+ context of a kernel thread and all the processing takes place here.
+ It usually reads data from the device and stores it in the internal
+ buffer together with the timestamp recorded in the top half.
+ </listitem>
+ </itemizedlist>
+ </sect2>
+ </sect1>
+ </chapter>
+ <chapter id='iioresources'>
+ <title> Resources </title>
+ IIO core may change during time so the best documentation to read is the
+ source code. There are several locations where you should look:
+ <itemizedlist>
+ <listitem>
+ <filename>drivers/iio/</filename>, contains the IIO core plus
+ and directories for each sensor type (e.g. accel, magnetometer,
+ etc.)
+ </listitem>
+ <listitem>
+ <filename>include/linux/iio/</filename>, contains the header
+ files, nice to read for the internal kernel interfaces.
+ </listitem>
+ <listitem>
+ <filename>include/uapi/linux/iio/</filename>, contains files to be
+ used by user space applications.
+ </listitem>
+ <listitem>
+ <filename>tools/iio/</filename>, contains tools for rapidly
+ testing buffers, events and device creation.
+ </listitem>
+ <listitem>
+ <filename>drivers/staging/iio/</filename>, contains code for some
+ drivers or experimental features that are not yet mature enough
+ to be moved out.
+ </listitem>
+ </itemizedlist>
+ <para>
+ Besides the code, there are some good online documentation sources:
+ <itemizedlist>
+ <listitem>
+ <ulink url="http://marc.info/?l=linux-iio"> Industrial I/O mailing
+ list </ulink>
+ </listitem>
+ <listitem>
+ <ulink url="http://wiki.analog.com/software/linux/docs/iio/iio">
+ Analog Device IIO wiki page </ulink>
+ </listitem>
+ <listitem>
+ <ulink url="https://fosdem.org/2015/schedule/event/iiosdr/">
+ Using the Linux IIO framework for SDR, Lars-Peter Clausen's
+ presentation at FOSDEM </ulink>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </chapter>
+</book>
+
+<!--
+vim: softtabstop=2:shiftwidth=2:expandtab:textwidth=72
+-->
--
1.9.1
On 04/08/15 15:20, Daniel Baluta wrote:
> This is intended to help developers faster find their way
> inside the Industrial I/O core and reduce time spent on IIO
> drivers development.
>
> Signed-off-by: Daniel Baluta <[email protected]>
> Acked-by: Crt Mori <[email protected]>
> Reviewed-by: Lars-Peter Clausen <[email protected]>
Applied to the togreg branch of iio.git.
Lets fine tune this / expand it in place.
Thanks for doing this Daniel, it is great to have this.
Jonathan
> ---
> Documentation/DocBook/Makefile | 2 +-
> Documentation/DocBook/iio.tmpl | 697 +++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 698 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/DocBook/iio.tmpl
>
> diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
> index b6a6a2e..9e08606 100644
> --- a/Documentation/DocBook/Makefile
> +++ b/Documentation/DocBook/Makefile
> @@ -15,7 +15,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
> 80211.xml debugobjects.xml sh.xml regulator.xml \
> alsa-driver-api.xml writing-an-alsa-driver.xml \
> tracepoint.xml drm.xml media_api.xml w1.xml \
> - writing_musb_glue_layer.xml crypto-API.xml
> + writing_musb_glue_layer.xml crypto-API.xml iio.xml
>
> include Documentation/DocBook/media/Makefile
>
> diff --git a/Documentation/DocBook/iio.tmpl b/Documentation/DocBook/iio.tmpl
> new file mode 100644
> index 0000000..06bb53d
> --- /dev/null
> +++ b/Documentation/DocBook/iio.tmpl
> @@ -0,0 +1,697 @@
> +<?xml version="1.0" encoding="UTF-8"?>
> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
> + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
> +
> +<book id="iioid">
> + <bookinfo>
> + <title>Industrial I/O driver developer's guide </title>
> +
> + <authorgroup>
> + <author>
> + <firstname>Daniel</firstname>
> + <surname>Baluta</surname>
> + <affiliation>
> + <address>
> + <email>[email protected]</email>
> + </address>
> + </affiliation>
> + </author>
> + </authorgroup>
> +
> + <copyright>
> + <year>2015</year>
> + <holder>Intel Corporation</holder>
> + </copyright>
> +
> + <legalnotice>
> + <para>
> + This documentation is free software; you can redistribute
> + it and/or modify it under the terms of the GNU General Public
> + License version 2.
> + </para>
> + </legalnotice>
> + </bookinfo>
> +
> + <toc></toc>
> +
> + <chapter id="intro">
> + <title>Introduction</title>
> + <para>
> + The main purpose of the Industrial I/O subsystem (IIO) is to provide
> + support for devices that in some sense perform either analog-to-digital
> + conversion (ADC) or digital-to-analog conversion (DAC) or both. The aim
> + is to fill the gap between the somewhat similar hwmon and input
> + subsystems.
> + Hwmon is directed at low sample rate sensors used to monitor and
> + control the system itself, like fan speed control or temperature
> + measurement. Input is, as its name suggests, focused on human interaction
> + input devices (keyboard, mouse, touchscreen). In some cases there is
> + considerable overlap between these and IIO.
> + </para>
> + <para>
> + Devices that fall into this category include:
> + <itemizedlist>
> + <listitem>
> + analog to digital converters (ADCs)
> + </listitem>
> + <listitem>
> + accelerometers
> + </listitem>
> + <listitem>
> + capacitance to digital converters (CDCs)
> + </listitem>
> + <listitem>
> + digital to analog converters (DACs)
> + </listitem>
> + <listitem>
> + gyroscopes
> + </listitem>
> + <listitem>
> + inertial measurement units (IMUs)
> + </listitem>
> + <listitem>
> + color and light sensors
> + </listitem>
> + <listitem>
> + magnetometers
> + </listitem>
> + <listitem>
> + pressure sensors
> + </listitem>
> + <listitem>
> + proximity sensors
> + </listitem>
> + <listitem>
> + temperature sensors
> + </listitem>
> + </itemizedlist>
> + Usually these sensors are connected via SPI or I2C. A common use case of the
> + sensors devices is to have combined functionality (e.g. light plus proximity
> + sensor).
> + </para>
> + </chapter>
> + <chapter id='iiosubsys'>
> + <title>Industrial I/O core</title>
> + <para>
> + The Industrial I/O core offers:
> + <itemizedlist>
> + <listitem>
> + a unified framework for writing drivers for many different types of
> + embedded sensors.
> + </listitem>
> + <listitem>
> + a standard interface to user space applications manipulating sensors.
> + </listitem>
> + </itemizedlist>
> + The implementation can be found under <filename>
> + drivers/iio/industrialio-*</filename>
> + </para>
> + <sect1 id="iiodevice">
> + <title> Industrial I/O devices </title>
> +
> +!Finclude/linux/iio/iio.h iio_dev
> +!Fdrivers/iio/industrialio-core.c iio_device_alloc
> +!Fdrivers/iio/industrialio-core.c iio_device_free
> +!Fdrivers/iio/industrialio-core.c iio_device_register
> +!Fdrivers/iio/industrialio-core.c iio_device_unregister
> +
> + <para>
> + An IIO device usually corresponds to a single hardware sensor and it
> + provides all the information needed by a driver handling a device.
> + Let's first have a look at the functionality embedded in an IIO
> + device then we will show how a device driver makes use of an IIO
> + device.
> + </para>
> + <para>
> + There are two ways for a user space application to interact
> + with an IIO driver.
> + <itemizedlist>
> + <listitem>
> + <filename>/sys/bus/iio/iio:deviceX/</filename>, this
> + represents a hardware sensor and groups together the data
> + channels of the same chip.
> + </listitem>
> + <listitem>
> + <filename>/dev/iio:deviceX</filename>, character device node
> + interface used for buffered data transfer and for events information
> + retrieval.
> + </listitem>
> + </itemizedlist>
> + </para>
> + A typical IIO driver will register itself as an I2C or SPI driver and will
> + create two routines, <function> probe </function> and <function> remove
> + </function>. At <function>probe</function>:
> + <itemizedlist>
> + <listitem>call <function>iio_device_alloc</function>, which allocates memory
> + for an IIO device.
> + </listitem>
> + <listitem> initialize IIO device fields with driver specific information
> + (e.g. device name, device channels).
> + </listitem>
> + <listitem>call <function> iio_device_register</function>, this registers the
> + device with the IIO core. After this call the device is ready to accept
> + requests from user space applications.
> + </listitem>
> + </itemizedlist>
> + At <function>remove</function>, we free the resources allocated in
> + <function>probe</function> in reverse order:
> + <itemizedlist>
> + <listitem><function>iio_device_unregister</function>, unregister the device
> + from the IIO core.
> + </listitem>
> + <listitem><function>iio_device_free</function>, free the memory allocated
> + for the IIO device.
> + </listitem>
> + </itemizedlist>
> +
> + <sect2 id="iioattr"> <title> IIO device sysfs interface </title>
> + <para>
> + Attributes are sysfs files used to expose chip info and also allowing
> + applications to set various configuration parameters. For device
> + with index X, attributes can be found under
> + <filename>/sys/bus/iio/iio:deviceX/ </filename> directory.
> + Common attributes are:
> + <itemizedlist>
> + <listitem><filename>name</filename>, description of the physical
> + chip.
> + </listitem>
> + <listitem><filename>dev</filename>, shows the major:minor pair
> + associated with <filename>/dev/iio:deviceX</filename> node.
> + </listitem>
> + <listitem><filename>sampling_frequency_available</filename>,
> + available discrete set of sampling frequency values for
> + device.
> + </listitem>
> + </itemizedlist>
> + Available standard attributes for IIO devices are described in the
> + <filename>Documentation/ABI/testing/sysfs-bus-iio </filename> file
> + in the Linux kernel sources.
> + </para>
> + </sect2>
> + <sect2 id="iiochannel"> <title> IIO device channels </title>
> +!Finclude/linux/iio/iio.h iio_chan_spec structure.
> + <para>
> + An IIO device channel is a representation of a data channel. An
> + IIO device can have one or multiple channels. For example:
> + <itemizedlist>
> + <listitem>
> + a thermometer sensor has one channel representing the
> + temperature measurement.
> + </listitem>
> + <listitem>
> + a light sensor with two channels indicating the measurements in
> + the visible and infrared spectrum.
> + </listitem>
> + <listitem>
> + an accelerometer can have up to 3 channels representing
> + acceleration on X, Y and Z axes.
> + </listitem>
> + </itemizedlist>
> + An IIO channel is described by the <type> struct iio_chan_spec
> + </type>. A thermometer driver for the temperature sensor in the
> + example above would have to describe its channel as follows:
> + <programlisting>
> + static const struct iio_chan_spec temp_channel[] = {
> + {
> + .type = IIO_TEMP,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + },
> + };
> +
> + </programlisting>
> + Channel sysfs attributes exposed to userspace are specified in
> + the form of <emphasis>bitmasks</emphasis>. Depending on their
> + shared info, attributes can be set in one of the following masks:
> + <itemizedlist>
> + <listitem><emphasis>info_mask_separate</emphasis>, attributes will
> + be specific to this channel</listitem>
> + <listitem><emphasis>info_mask_shared_by_type</emphasis>,
> + attributes are shared by all channels of the same type</listitem>
> + <listitem><emphasis>info_mask_shared_by_dir</emphasis>, attributes
> + are shared by all channels of the same direction </listitem>
> + <listitem><emphasis>info_mask_shared_by_all</emphasis>,
> + attributes are shared by all channels</listitem>
> + </itemizedlist>
> + When there are multiple data channels per channel type we have two
> + ways to distinguish between them:
> + <itemizedlist>
> + <listitem> set <emphasis> .modified</emphasis> field of <type>
> + iio_chan_spec</type> to 1. Modifiers are specified using
> + <emphasis>.channel2</emphasis> field of the same
> + <type>iio_chan_spec</type> structure and are used to indicate a
> + physically unique characteristic of the channel such as its direction
> + or spectral response. For example, a light sensor can have two channels,
> + one for infrared light and one for both infrared and visible light.
> + </listitem>
> + <listitem> set <emphasis>.indexed </emphasis> field of
> + <type>iio_chan_spec</type> to 1. In this case the channel is
> + simply another instance with an index specified by the
> + <emphasis>.channel</emphasis> field.
> + </listitem>
> + </itemizedlist>
> + Here is how we can make use of the channel's modifiers:
> + <programlisting>
> + static const struct iio_chan_spec light_channels[] = {
> + {
> + .type = IIO_INTENSITY,
> + .modified = 1,
> + .channel2 = IIO_MOD_LIGHT_IR,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> + },
> + {
> + .type = IIO_INTENSITY,
> + .modified = 1,
> + .channel2 = IIO_MOD_LIGHT_BOTH,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> + },
> + {
> + .type = IIO_LIGHT,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> + },
> +
> + }
> + </programlisting>
> + This channel's definition will generate two separate sysfs files
> + for raw data retrieval:
> + <itemizedlist>
> + <listitem>
> + <filename>/sys/bus/iio/iio:deviceX/in_intensity_ir_raw</filename>
> + </listitem>
> + <listitem>
> + <filename>/sys/bus/iio/iio:deviceX/in_intensity_both_raw</filename>
> + </listitem>
> + </itemizedlist>
> + one file for processed data:
> + <itemizedlist>
> + <listitem>
> + <filename>/sys/bus/iio/iio:deviceX/in_illuminance_input
> + </filename>
> + </listitem>
> + </itemizedlist>
> + and one shared sysfs file for sampling frequency:
> + <itemizedlist>
> + <listitem>
> + <filename>/sys/bus/iio/iio:deviceX/sampling_frequency.
> + </filename>
> + </listitem>
> + </itemizedlist>
> + </para>
> + <para>
> + Here is how we can make use of the channel's indexing:
> + <programlisting>
> + static const struct iio_chan_spec light_channels[] = {
> + {
> + .type = IIO_VOLTAGE,
> + .indexed = 1,
> + .channel = 0,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + },
> + {
> + .type = IIO_VOLTAGE,
> + .indexed = 1,
> + .channel = 1,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + },
> + }
> + </programlisting>
> + This will generate two separate attributes files for raw data
> + retrieval:
> + <itemizedlist>
> + <listitem>
> + <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage0_raw</filename>,
> + representing voltage measurement for channel 0.
> + </listitem>
> + <listitem>
> + <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage1_raw</filename>,
> + representing voltage measurement for channel 1.
> + </listitem>
> + </itemizedlist>
> + </para>
> + </sect2>
> + </sect1>
> +
> + <sect1 id="iiobuffer"> <title> Industrial I/O buffers </title>
> +!Finclude/linux/iio/buffer.h iio_buffer
> +!Edrivers/iio/industrialio-buffer.c
> +
> + <para>
> + The Industrial I/O core offers a way for continuous data capture
> + based on a trigger source. Multiple data channels can be read at once
> + from <filename>/dev/iio:deviceX</filename> character device node,
> + thus reducing the CPU load.
> + </para>
> +
> + <sect2 id="iiobuffersysfs">
> + <title>IIO buffer sysfs interface </title>
> + <para>
> + An IIO buffer has an associated attributes directory under <filename>
> + /sys/bus/iio/iio:deviceX/buffer/</filename>. Here are the existing
> + attributes:
> + <itemizedlist>
> + <listitem>
> + <emphasis>length</emphasis>, the total number of data samples
> + (capacity) that can be stored by the buffer.
> + </listitem>
> + <listitem>
> + <emphasis>enable</emphasis>, activate buffer capture.
> + </listitem>
> + </itemizedlist>
> +
> + </para>
> + </sect2>
> + <sect2 id="iiobuffersetup"> <title> IIO buffer setup </title>
> + <para>The meta information associated with a channel reading
> + placed in a buffer is called a <emphasis> scan element </emphasis>.
> + The important bits configuring scan elements are exposed to
> + userspace applications via the <filename>
> + /sys/bus/iio/iio:deviceX/scan_elements/</filename> directory. This
> + file contains attributes of the following form:
> + <itemizedlist>
> + <listitem><emphasis>enable</emphasis>, used for enabling a channel.
> + If and only if its attribute is non zero, then a triggered capture
> + will contain data samples for this channel.
> + </listitem>
> + <listitem><emphasis>type</emphasis>, description of the scan element
> + data storage within the buffer and hence the form in which it is
> + read from user space. Format is <emphasis>
> + [be|le]:[s|u]bits/storagebitsXrepeat[>>shift] </emphasis>.
> + <itemizedlist>
> + <listitem> <emphasis>be</emphasis> or <emphasis>le</emphasis>, specifies
> + big or little endian.
> + </listitem>
> + <listitem>
> + <emphasis>s </emphasis>or <emphasis>u</emphasis>, specifies if
> + signed (2's complement) or unsigned.
> + </listitem>
> + <listitem><emphasis>bits</emphasis>, is the number of valid data
> + bits.
> + </listitem>
> + <listitem><emphasis>storagebits</emphasis>, is the number of bits
> + (after padding) that it occupies in the buffer.
> + </listitem>
> + <listitem>
> + <emphasis>shift</emphasis>, if specified, is the shift that needs
> + to be applied prior to masking out unused bits.
> + </listitem>
> + <listitem>
> + <emphasis>repeat</emphasis>, specifies the number of bits/storagebits
> + repetitions. When the repeat element is 0 or 1, then the repeat
> + value is omitted.
> + </listitem>
> + </itemizedlist>
> + </listitem>
> + </itemizedlist>
> + For example, a driver for a 3-axis accelerometer with 12 bit
> + resolution where data is stored in two 8-bits registers as
> + follows:
> + <programlisting>
> + 7 6 5 4 3 2 1 0
> + +---+---+---+---+---+---+---+---+
> + |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06)
> + +---+---+---+---+---+---+---+---+
> +
> + 7 6 5 4 3 2 1 0
> + +---+---+---+---+---+---+---+---+
> + |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07)
> + +---+---+---+---+---+---+---+---+
> + </programlisting>
> +
> + will have the following scan element type for each axis:
> + <programlisting>
> + $ cat /sys/bus/iio/devices/iio:device0/scan_elements/in_accel_y_type
> + le:s12/16>>4
> + </programlisting>
> + A user space application will interpret data samples read from the
> + buffer as two byte little endian signed data, that needs a 4 bits
> + right shift before masking out the 12 valid bits of data.
> + </para>
> + <para>
> + For implementing buffer support a driver should initialize the following
> + fields in <type>iio_chan_spec</type> definition:
> + <programlisting>
> + struct iio_chan_spec {
> + /* other members */
> + int scan_index
> + struct {
> + char sign;
> + u8 realbits;
> + u8 storagebits;
> + u8 shift;
> + u8 repeat;
> + enum iio_endian endianness;
> + } scan_type;
> + };
> + </programlisting>
> + The driver implementing the accelerometer described above will
> + have the following channel definition:
> + <programlisting>
> + struct struct iio_chan_spec accel_channels[] = {
> + {
> + .type = IIO_ACCEL,
> + .modified = 1,
> + .channel2 = IIO_MOD_X,
> + /* other stuff here */
> + .scan_index = 0,
> + .scan_type = {
> + .sign = 's',
> + .realbits = 12,
> + .storgebits = 16,
> + .shift = 4,
> + .endianness = IIO_LE,
> + },
> + }
> + /* similar for Y (with channel2 = IIO_MOD_Y, scan_index = 1)
> + * and Z (with channel2 = IIO_MOD_Z, scan_index = 2) axis
> + */
> + }
> + </programlisting>
> + </para>
> + <para>
> + Here <emphasis> scan_index </emphasis> defines the order in which
> + the enabled channels are placed inside the buffer. Channels with a lower
> + scan_index will be placed before channels with a higher index. Each
> + channel needs to have a unique scan_index.
> + </para>
> + <para>
> + Setting scan_index to -1 can be used to indicate that the specific
> + channel does not support buffered capture. In this case no entries will
> + be created for the channel in the scan_elements directory.
> + </para>
> + </sect2>
> + </sect1>
> +
> + <sect1 id="iiotrigger"> <title> Industrial I/O triggers </title>
> +!Finclude/linux/iio/trigger.h iio_trigger
> +!Edrivers/iio/industrialio-trigger.c
> + <para>
> + In many situations it is useful for a driver to be able to
> + capture data based on some external event (trigger) as opposed
> + to periodically polling for data. An IIO trigger can be provided
> + by a device driver that also has an IIO device based on hardware
> + generated events (e.g. data ready or threshold exceeded) or
> + provided by a separate driver from an independent interrupt
> + source (e.g. GPIO line connected to some external system, timer
> + interrupt or user space writing a specific file in sysfs). A
> + trigger may initiate data capture for a number of sensors and
> + also it may be completely unrelated to the sensor itself.
> + </para>
> +
> + <sect2 id="iiotrigsysfs"> <title> IIO trigger sysfs interface </title>
> + There are two locations in sysfs related to triggers:
> + <itemizedlist>
> + <listitem><filename>/sys/bus/iio/devices/triggerY</filename>,
> + this file is created once an IIO trigger is registered with
> + the IIO core and corresponds to trigger with index Y. Because
> + triggers can be very different depending on type there are few
> + standard attributes that we can describe here:
> + <itemizedlist>
> + <listitem>
> + <emphasis>name</emphasis>, trigger name that can be later
> + used for association with a device.
> + </listitem>
> + <listitem>
> + <emphasis>sampling_frequency</emphasis>, some timer based
> + triggers use this attribute to specify the frequency for
> + trigger calls.
> + </listitem>
> + </itemizedlist>
> + </listitem>
> + <listitem>
> + <filename>/sys/bus/iio/devices/iio:deviceX/trigger/</filename>, this
> + directory is created once the device supports a triggered
> + buffer. We can associate a trigger with our device by writing
> + the trigger's name in the <filename>current_trigger</filename> file.
> + </listitem>
> + </itemizedlist>
> + </sect2>
> +
> + <sect2 id="iiotrigattr"> <title> IIO trigger setup</title>
> +
> + <para>
> + Let's see a simple example of how to setup a trigger to be used
> + by a driver.
> +
> + <programlisting>
> + struct iio_trigger_ops trigger_ops = {
> + .set_trigger_state = sample_trigger_state,
> + .validate_device = sample_validate_device,
> + }
> +
> + struct iio_trigger *trig;
> +
> + /* first, allocate memory for our trigger */
> + trig = iio_trigger_alloc(dev, "trig-%s-%d", name, idx);
> +
> + /* setup trigger operations field */
> + trig->ops = &trigger_ops;
> +
> + /* now register the trigger with the IIO core */
> + iio_trigger_register(trig);
> + </programlisting>
> + </para>
> + </sect2>
> +
> + <sect2 id="iiotrigsetup"> <title> IIO trigger ops</title>
> +!Finclude/linux/iio/trigger.h iio_trigger_ops
> + <para>
> + Notice that a trigger has a set of operations attached:
> + <itemizedlist>
> + <listitem>
> + <function>set_trigger_state</function>, switch the trigger on/off
> + on demand.
> + </listitem>
> + <listitem>
> + <function>validate_device</function>, function to validate the
> + device when the current trigger gets changed.
> + </listitem>
> + </itemizedlist>
> + </para>
> + </sect2>
> + </sect1>
> + <sect1 id="iiotriggered_buffer">
> + <title> Industrial I/O triggered buffers </title>
> + <para>
> + Now that we know what buffers and triggers are let's see how they
> + work together.
> + </para>
> + <sect2 id="iiotrigbufsetup"> <title> IIO triggered buffer setup</title>
> +!Edrivers/iio/industrialio-triggered-buffer.c
> +!Finclude/linux/iio/iio.h iio_buffer_setup_ops
> +
> +
> + <para>
> + A typical triggered buffer setup looks like this:
> + <programlisting>
> + const struct iio_buffer_setup_ops sensor_buffer_setup_ops = {
> + .preenable = sensor_buffer_preenable,
> + .postenable = sensor_buffer_postenable,
> + .postdisable = sensor_buffer_postdisable,
> + .predisable = sensor_buffer_predisable,
> + };
> +
> + irqreturn_t sensor_iio_pollfunc(int irq, void *p)
> + {
> + pf->timestamp = iio_get_time_ns();
> + return IRQ_WAKE_THREAD;
> + }
> +
> + irqreturn_t sensor_trigger_handler(int irq, void *p)
> + {
> + u16 buf[8];
> + int i = 0;
> +
> + /* read data for each active channel */
> + for_each_set_bit(bit, active_scan_mask, masklength)
> + buf[i++] = sensor_get_data(bit)
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, buf, timestamp);
> +
> + iio_trigger_notify_done(trigger);
> + return IRQ_HANDLED;
> + }
> +
> + /* setup triggered buffer, usually in probe function */
> + iio_triggered_buffer_setup(indio_dev, sensor_iio_polfunc,
> + sensor_trigger_handler,
> + sensor_buffer_setup_ops);
> + </programlisting>
> + </para>
> + The important things to notice here are:
> + <itemizedlist>
> + <listitem><function> iio_buffer_setup_ops</function>, the buffer setup
> + functions to be called at predefined points in the buffer configuration
> + sequence (e.g. before enable, after disable). If not specified, the
> + IIO core uses the default <type>iio_triggered_buffer_setup_ops</type>.
> + </listitem>
> + <listitem><function>sensor_iio_pollfunc</function>, the function that
> + will be used as top half of poll function. It should do as little
> + processing as possible, because it runs in interrupt context. The most
> + common operation is recording of the current timestamp and for this reason
> + one can use the IIO core defined <function>iio_pollfunc_store_time
> + </function> function.
> + </listitem>
> + <listitem><function>sensor_trigger_handler</function>, the function that
> + will be used as bottom half of the poll function. This runs in the
> + context of a kernel thread and all the processing takes place here.
> + It usually reads data from the device and stores it in the internal
> + buffer together with the timestamp recorded in the top half.
> + </listitem>
> + </itemizedlist>
> + </sect2>
> + </sect1>
> + </chapter>
> + <chapter id='iioresources'>
> + <title> Resources </title>
> + IIO core may change during time so the best documentation to read is the
> + source code. There are several locations where you should look:
> + <itemizedlist>
> + <listitem>
> + <filename>drivers/iio/</filename>, contains the IIO core plus
> + and directories for each sensor type (e.g. accel, magnetometer,
> + etc.)
> + </listitem>
> + <listitem>
> + <filename>include/linux/iio/</filename>, contains the header
> + files, nice to read for the internal kernel interfaces.
> + </listitem>
> + <listitem>
> + <filename>include/uapi/linux/iio/</filename>, contains files to be
> + used by user space applications.
> + </listitem>
> + <listitem>
> + <filename>tools/iio/</filename>, contains tools for rapidly
> + testing buffers, events and device creation.
> + </listitem>
> + <listitem>
> + <filename>drivers/staging/iio/</filename>, contains code for some
> + drivers or experimental features that are not yet mature enough
> + to be moved out.
> + </listitem>
> + </itemizedlist>
> + <para>
> + Besides the code, there are some good online documentation sources:
> + <itemizedlist>
> + <listitem>
> + <ulink url="http://marc.info/?l=linux-iio"> Industrial I/O mailing
> + list </ulink>
> + </listitem>
> + <listitem>
> + <ulink url="http://wiki.analog.com/software/linux/docs/iio/iio">
> + Analog Device IIO wiki page </ulink>
> + </listitem>
> + <listitem>
> + <ulink url="https://fosdem.org/2015/schedule/event/iiosdr/">
> + Using the Linux IIO framework for SDR, Lars-Peter Clausen's
> + presentation at FOSDEM </ulink>
> + </listitem>
> + </itemizedlist>
> + </para>
> + </chapter>
> +</book>
> +
> +<!--
> +vim: softtabstop=2:shiftwidth=2:expandtab:textwidth=72
> +-->
>