2015-08-24 20:16:35

by Ondrej Zary

[permalink] [raw]
Subject: [PATCH 0/5] [resend] gxt4500: Make usable on x86 and fix some bugs


Fire GL2 AGP has GXT6000P and is a x86 card but the gxt4500 driver is
currently limited to PPC.

This patch series makes the driver work on x86 and fixes some color problems.

--
Ondrej Zary


2015-08-24 20:15:41

by Ondrej Zary

[permalink] [raw]
Subject: [PATCH 1/5] [resend] gxt4500: enable on non-PPC architectures

These chips can be present at least on x86 too - Fire GL2 AGP has GXT6000P but
this driver is currently limited to PPC.
Enable it for all architectures and add chip configuration for little-endian.

Tested on x86 with Fire GL2 AGP.

Signed-off-by: Ondrej Zary <[email protected]>
---
drivers/video/fbdev/Kconfig | 5 +++--
drivers/video/fbdev/gxt4500.c | 7 +++++++
2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 2d98de5..78335bd 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2132,7 +2132,7 @@ config FB_UDL

config FB_IBM_GXT4500
tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
- depends on FB && PPC
+ depends on FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -2140,7 +2140,8 @@ config FB_IBM_GXT4500
Say Y here to enable support for the IBM GXT4000P/6000P and
GXT4500P/6500P display adaptor based on Raster Engine RC1000,
found on some IBM System P (pSeries) machines. This driver
- doesn't use Geometry Engine GT1000.
+ doesn't use Geometry Engine GT1000. This driver also supports
+ AGP Fire GL2/3/4 cards on x86.

config FB_PS3
tristate "PS3 GPU framebuffer driver"
diff --git a/drivers/video/fbdev/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index 135d78a..1bf9894 100644
--- a/drivers/video/fbdev/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
@@ -670,8 +670,15 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)

pci_set_drvdata(pdev, info);

+#ifdef __BIG_ENDIAN
/* Set byte-swapping for DFA aperture for all pixel sizes */
pci_write_config_dword(pdev, CFG_ENDIAN0, 0x333300);
+#else /* __LITTLE_ENDIAN */
+ /* not sure what this means but fgl23 driver does that */
+ pci_write_config_dword(pdev, CFG_ENDIAN0, 0x2300);
+/* pci_write_config_dword(pdev, CFG_ENDIAN0 + 4, 0x400000);*/
+ pci_write_config_dword(pdev, CFG_ENDIAN0 + 8, 0x98530000);
+#endif

info->fbops = &gxt4500_ops;
info->flags = FBINFO_FLAG_DEFAULT;
--
Ondrej Zary

2015-08-24 20:16:16

by Ondrej Zary

[permalink] [raw]
Subject: [PATCH 2/5] [resend] gxt4500: fix 16bpp 565 mode

Fix wrong colors in 16bpp 565 mode.

Signed-off-by: Ondrej Zary <[email protected]>
---
drivers/video/fbdev/gxt4500.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index 1bf9894..1f2fd5b 100644
--- a/drivers/video/fbdev/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
@@ -525,7 +525,7 @@ static int gxt4500_setcolreg(unsigned int reg, unsigned int red,
u32 val = reg;
switch (par->pixfmt) {
case DFA_PIX_16BIT_565:
- val |= (reg << 11) | (reg << 6);
+ val |= (reg << 11) | (reg << 5);
break;
case DFA_PIX_16BIT_1555:
val |= (reg << 10) | (reg << 5);
--
Ondrej Zary

2015-08-24 20:15:44

by Ondrej Zary

[permalink] [raw]
Subject: [PATCH 3/5] [resend] gxt4500: fix color order

The color order in truecolor modes is wrong. This does not affect console but
is visible e.g. in X11 which has wrong colors.

Swap blue and red colors to fix the problem.
Fixes https://forums.gentoo.org/viewtopic-t-692740-start-0.html

Signed-off-by: Ondrej Zary <[email protected]>
---
drivers/video/fbdev/gxt4500.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/video/fbdev/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index 1f2fd5b..442b07c 100644
--- a/drivers/video/fbdev/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
@@ -347,11 +347,12 @@ static void gxt4500_unpack_pixfmt(struct fb_var_screeninfo *var,
break;
}
if (pixfmt != DFA_PIX_8BIT) {
- var->green.offset = var->red.length;
- var->blue.offset = var->green.offset + var->green.length;
+ var->blue.offset = 0;
+ var->green.offset = var->blue.length;
+ var->red.offset = var->green.offset + var->green.length;
if (var->transp.length)
var->transp.offset =
- var->blue.offset + var->blue.length;
+ var->red.offset + var->red.length;
}
}

--
Ondrej Zary

2015-08-24 20:16:52

by Ondrej Zary

[permalink] [raw]
Subject: [PATCH 4/5] [resend] gxt4500: Use write-combining for framebuffer

Use write-combining for framebuffer to greatly improve performance on x86.

Signed-off-by: Ondrej Zary <[email protected]>
---
drivers/video/fbdev/gxt4500.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index 442b07c..e0d1550 100644
--- a/drivers/video/fbdev/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
@@ -142,7 +142,7 @@ static const unsigned char watfmt[] = {

struct gxt4500_par {
void __iomem *regs;
-
+ int wc_cookie;
int pixfmt; /* pixel format, see DFA_PIX_* values */

/* PLL parameters */
@@ -663,7 +663,7 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)

info->fix.smem_start = fb_phys;
info->fix.smem_len = pci_resource_len(pdev, 1);
- info->screen_base = pci_ioremap_bar(pdev, 1);
+ info->screen_base = ioremap_wc(fb_phys, info->fix.smem_len);
if (!info->screen_base) {
dev_err(&pdev->dev, "gxt4500: cannot map framebuffer\n");
goto err_unmap_regs;
@@ -671,6 +671,9 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)

pci_set_drvdata(pdev, info);

+ par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
+ info->fix.smem_len);
+
#ifdef __BIG_ENDIAN
/* Set byte-swapping for DFA aperture for all pixel sizes */
pci_write_config_dword(pdev, CFG_ENDIAN0, 0x333300);
@@ -735,6 +738,7 @@ static void gxt4500_remove(struct pci_dev *pdev)
return;
par = info->par;
unregister_framebuffer(info);
+ arch_phys_wc_del(par->wc_cookie);
fb_dealloc_cmap(&info->cmap);
iounmap(par->regs);
iounmap(info->screen_base);
--
Ondrej Zary

2015-08-24 20:15:40

by Ondrej Zary

[permalink] [raw]
Subject: [PATCH 5/5] [resend] gxt4500: enable panning

The driver implements pan_display but the corresponding flags are not set.

Add FBINFO_HWACCEL_XPAN and FBINFO_HWACCEL_YPAN to flags to allow HW
accelerated panning (for fast scrolling).

Signed-off-by: Ondrej Zary <[email protected]>
---
drivers/video/fbdev/gxt4500.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index e0d1550..88a3cf6 100644
--- a/drivers/video/fbdev/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
@@ -685,7 +685,8 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
#endif

info->fbops = &gxt4500_ops;
- info->flags = FBINFO_FLAG_DEFAULT;
+ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_HWACCEL_XPAN |
+ FBINFO_HWACCEL_YPAN;

err = fb_alloc_cmap(&info->cmap, 256, 0);
if (err) {
--
Ondrej Zary