commit ee36027427c7 ("clk: imx: Add clock support for imx6qp")
introduced a regression due to a subtle typo in the 'can_root' clock
definition. The effect is that trying to configure the bitrate of the
can interfaces fails with -EDOM or produces a division by zero error
due to the clock_freq of the can serial clock being reported as '0'.
Signed-off-by: Lothar Waßmann <[email protected]>
---
drivers/clk/imx/clk-imx6q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index 02e1818..2beb396f 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -394,7 +394,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1", 2, 7);
} else {
clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
- clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60", base + 0x20, 2, 6);
+ clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
--
2.1.4
On Wed, Mar 30, 2016 at 02:23:03PM +0200, Lothar Wa?mann wrote:
> commit ee36027427c7 ("clk: imx: Add clock support for imx6qp")
> introduced a regression due to a subtle typo in the 'can_root' clock
> definition. The effect is that trying to configure the bitrate of the
> can interfaces fails with -EDOM or produces a division by zero error
> due to the clock_freq of the can serial clock being reported as '0'.
>
> Signed-off-by: Lothar Wa?mann <[email protected]>
Applied, thanks.