Patches #1 and #2 are just cleanup: some exported headers were still under
a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
not under an uapi directory.
After these three patches, all exported headers are under an uapi directory:
path #4 stops searching files in non uapi directories.
The patch #5 was spotted by code review: there is no in-tree user of this
functionality.
Patch #6 fixes some warnings/errors reported by 0-day tests.
Patch #7 to #9 fix some errors when the corresponding files are included by
userland.
Patches #10 and #11 remove the need to list explicitly headers. Now all files
under an uapi directory are exported.
This series has been tested with a 'make headers_install' on x86 and a
'make headers_install_all'. I've checked the result of both commands.
This patch is built against linus tree. If I must rebase it against the kbuild
tree, just tell me.
Michal, is this series going through your tree?
v8 -> v9:
- rebase on top of linus tree
- patch #8: add include/uapi/linux/crypto.h
v7 -> v8:
- rebase on top of linus tree
- add patch #7, #8 and #9
v6 -> v7:
- rebase on top of linus tree
- patch #7: remove autogenerated files from the list in the commit log
v5 -> v6:
- patch #6: remove change of include/uapi/linux/media.h
- patch #7: fix hdr export when 'make O=' is used (look for genhdr files in
the right directory)
- patch #8: fix 'make headers_check'
v4 -> v5:
- patch #3: get back to v3 (don't export msr-index.h)
- patch #6: new in this version
- patch #7: fix compilation by introducing header-n
v3 -> v4:
- first patch has been included
- patch #4: get back to v2 and remove arch/x86/include/asm/msr-index.h
v2 -> v3:
- patch #1: remove arch/arm/include/asm/types.h
- patch #2: remove arch/h8300/include/asm/bitsperlong.h
- patch #3: remove arch/nios2/include/uapi/asm/setup.h
- patch #4: don't export msr-index.h
- patch #5: fix a typo: s/unput-files3-name/input-files3-name
- patch #6: no change
- patch #7: fix include/uapi/asm-generic/Kbuild.asm by introducing mandatory-y
- add patch #8
v1 -> v2:
- add patch #1 to #6
- patch #7: remove use of header-y
Comments are welcomed,
Nicolas
Some files will be exported after the next patch. 0-day tests report the
following warning/error:
./usr/include/linux/bcache.h:8: include of <linux/types.h> is preferred over <asm/types.h>
./usr/include/linux/bcache.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/qrtr.h:8: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/cryptouser.h:39: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/pr.h:14: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/btrfs_tree.h:337: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/rdma/bnxt_re-abi.h:45: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/uapi/linux/bcache.h | 2 +-
include/uapi/linux/btrfs_tree.h | 2 ++
include/uapi/linux/cryptouser.h | 2 ++
include/uapi/linux/pr.h | 2 ++
include/uapi/linux/qrtr.h | 1 +
include/uapi/rdma/bnxt_re-abi.h | 2 ++
6 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/bcache.h b/include/uapi/linux/bcache.h
index 22b6ad31c706..e3bb0635e94a 100644
--- a/include/uapi/linux/bcache.h
+++ b/include/uapi/linux/bcache.h
@@ -5,7 +5,7 @@
* Bcache on disk data structures
*/
-#include <asm/types.h>
+#include <linux/types.h>
#define BITMASK(name, type, field, offset, size) \
static inline __u64 name(const type *k) \
diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
index d5ad15a106a7..6a261cb52d95 100644
--- a/include/uapi/linux/btrfs_tree.h
+++ b/include/uapi/linux/btrfs_tree.h
@@ -1,6 +1,8 @@
#ifndef _BTRFS_CTREE_H_
#define _BTRFS_CTREE_H_
+#include <linux/types.h>
+
/*
* This header contains the structure definitions and constants used
* by file system objects that can be retrieved using
diff --git a/include/uapi/linux/cryptouser.h b/include/uapi/linux/cryptouser.h
index 11d21fce14d6..c6a09c5261e7 100644
--- a/include/uapi/linux/cryptouser.h
+++ b/include/uapi/linux/cryptouser.h
@@ -18,6 +18,8 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#include <linux/types.h>
+
/* Netlink configuration messages. */
enum {
CRYPTO_MSG_BASE = 0x10,
diff --git a/include/uapi/linux/pr.h b/include/uapi/linux/pr.h
index 57d7c0f916b6..645ef3cf3dd0 100644
--- a/include/uapi/linux/pr.h
+++ b/include/uapi/linux/pr.h
@@ -1,6 +1,8 @@
#ifndef _UAPI_PR_H
#define _UAPI_PR_H
+#include <linux/types.h>
+
enum pr_type {
PR_WRITE_EXCLUSIVE = 1,
PR_EXCLUSIVE_ACCESS = 2,
diff --git a/include/uapi/linux/qrtr.h b/include/uapi/linux/qrtr.h
index 66c0748d26e2..b14ee91ec387 100644
--- a/include/uapi/linux/qrtr.h
+++ b/include/uapi/linux/qrtr.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_QRTR_H
#define _LINUX_QRTR_H
+#include <linux/types.h>
#include <linux/socket.h>
struct sockaddr_qrtr {
diff --git a/include/uapi/rdma/bnxt_re-abi.h b/include/uapi/rdma/bnxt_re-abi.h
index e2c8a3f0ccec..74018bd18d72 100644
--- a/include/uapi/rdma/bnxt_re-abi.h
+++ b/include/uapi/rdma/bnxt_re-abi.h
@@ -39,6 +39,8 @@
#ifndef __BNXT_RE_UVERBS_ABI_H__
#define __BNXT_RE_UVERBS_ABI_H__
+#include <linux/types.h>
+
#define BNXT_RE_ABI_VERSION 1
struct bnxt_re_uctx_resp {
--
2.8.1
This option was added in commit c7bb349e7c25 ("kbuild: introduce destination-y
for exported headers") but never used in-tree.
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Paul Bolle <[email protected]>
---
Documentation/kbuild/makefiles.txt | 23 ++++-------------------
scripts/Makefile.headersinst | 2 +-
2 files changed, 5 insertions(+), 20 deletions(-)
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 9b9c4797fc55..37b525d329ae 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -46,9 +46,8 @@ This document describes the Linux kernel Makefiles.
=== 7 Kbuild syntax for exported headers
--- 7.1 header-y
--- 7.2 genhdr-y
- --- 7.3 destination-y
- --- 7.4 generic-y
- --- 7.5 generated-y
+ --- 7.3 generic-y
+ --- 7.4 generated-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1295,21 +1294,7 @@ See subsequent chapter for the syntax of the Kbuild file.
#include/linux/Kbuild
genhdr-y += version.h
- --- 7.3 destination-y
-
- When an architecture has a set of exported headers that needs to be
- exported to a different directory destination-y is used.
- destination-y specifies the destination directory for all exported
- headers in the file where it is present.
-
- Example:
- #arch/xtensa/platforms/s6105/include/platform/Kbuild
- destination-y := include/linux
-
- In the example above all exported headers in the Kbuild file
- will be located in the directory "include/linux" when exported.
-
- --- 7.4 generic-y
+ --- 7.3 generic-y
If an architecture uses a verbatim copy of a header from
include/asm-generic then this is listed in the file
@@ -1336,7 +1321,7 @@ See subsequent chapter for the syntax of the Kbuild file.
Example: termios.h
#include <asm-generic/termios.h>
- --- 7.5 generated-y
+ --- 7.4 generated-y
If an architecture generates other header files alongside generic-y
wrappers, and not included in genhdr-y, then generated-y specifies
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 3e20d03432d2..876b42cfede4 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -14,7 +14,7 @@ kbuild-file := $(srctree)/$(obj)/Kbuild
include $(kbuild-file)
# called may set destination dir (when installing to asm/)
-_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))
+_dst := $(if $(dst),$(dst),$(obj))
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
--
2.8.1
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
arch/h8300/include/asm/bitsperlong.h | 14 --------------
arch/h8300/include/uapi/asm/bitsperlong.h | 14 ++++++++++++++
2 files changed, 14 insertions(+), 14 deletions(-)
delete mode 100644 arch/h8300/include/asm/bitsperlong.h
create mode 100644 arch/h8300/include/uapi/asm/bitsperlong.h
diff --git a/arch/h8300/include/asm/bitsperlong.h b/arch/h8300/include/asm/bitsperlong.h
deleted file mode 100644
index e140e46729ac..000000000000
--- a/arch/h8300/include/asm/bitsperlong.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_H8300_BITS_PER_LONG
-#define __ASM_H8300_BITS_PER_LONG
-
-#include <asm-generic/bitsperlong.h>
-
-#if !defined(__ASSEMBLY__)
-/* h8300-unknown-linux required long */
-#define __kernel_size_t __kernel_size_t
-typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
-typedef long __kernel_ptrdiff_t;
-#endif
-
-#endif /* __ASM_H8300_BITS_PER_LONG */
diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
new file mode 100644
index 000000000000..e56cf72369b6
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,14 @@
+#ifndef _UAPI_ASM_H8300_BITS_PER_LONG
+#define _UAPI_ASM_H8300_BITS_PER_LONG
+
+#include <asm-generic/bitsperlong.h>
+
+#if !defined(__ASSEMBLY__)
+/* h8300-unknown-linux required long */
+#define __kernel_size_t __kernel_size_t
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#endif
+
+#endif /* _UAPI_ASM_H8300_BITS_PER_LONG */
--
2.8.1
After the last four patches, all exported headers are under uapi/, thus
input-files2 are not needed anymore.
The side effect is that input-files1-name is exactly header-y.
Note also that input-files3-name is genhdr-y.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
scripts/Makefile.headersinst | 34 +++++++++++-----------------------
1 file changed, 11 insertions(+), 23 deletions(-)
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 1106d6ca3a38..3e20d03432d2 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -40,31 +40,20 @@ wrapper-files := $(filter $(header-y), $(generic-y))
srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
-oldsrcdir := $(srctree)/$(subst /uapi,,$(obj))
-
# all headers files for this dir
header-y := $(filter-out $(generic-y), $(header-y))
all-files := $(header-y) $(genhdr-y) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))
-input-files1 := $(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)), \
- $(wildcard $(srcdir)/$(hdr))) \
- )
-input-files1-name := $(notdir $(input-files1))
-input-files2 := $(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)),, \
- $(if $(wildcard $(oldsrcdir)/$(hdr)), \
- $(wildcard $(oldsrcdir)/$(hdr)), \
- $(error Missing UAPI file $(srcdir)/$(hdr))) \
- ))
-input-files2-name := $(notdir $(input-files2))
-input-files3 := $(foreach hdr, $(genhdr-y), \
- $(if $(wildcard $(gendir)/$(hdr)), \
- $(wildcard $(gendir)/$(hdr)), \
- $(error Missing generated UAPI file $(gendir)/$(hdr)) \
- ))
-input-files3-name := $(notdir $(input-files3))
+# Check that all expected files exist
+$(foreach hdr, $(header-y), \
+ $(if $(wildcard $(srcdir)/$(hdr)),, \
+ $(error Missing UAPI file $(srcdir)/$(hdr)) \
+ ))
+$(foreach hdr, $(genhdr-y), \
+ $(if $(wildcard $(gendir)/$(hdr)),, \
+ $(error Missing generated UAPI file $(gendir)/$(hdr)) \
+ ))
# Work out what needs to be removed
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
@@ -78,9 +67,8 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(input-files1-name); \
- $(CONFIG_SHELL) $< $(installdir) $(oldsrcdir) $(input-files2-name); \
- $(CONFIG_SHELL) $< $(installdir) $(gendir) $(input-files3-name); \
+ $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-y); \
+ $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-y); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
--
2.8.1
This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.
The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.
Note that only cris and tile have more directories than only asm:
- arch-v[10|32] for cris;
- arch for tile.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
Documentation/kbuild/makefiles.txt | 15 +--------------
Makefile | 6 +++---
arch/cris/include/uapi/asm/Kbuild | 3 ---
arch/tile/include/uapi/asm/Kbuild | 2 --
scripts/Makefile.headersinst | 3 +--
5 files changed, 5 insertions(+), 24 deletions(-)
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 91ffb391ed54..223b33d5195a 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -49,7 +49,6 @@ This document describes the Linux kernel Makefiles.
--- 7.3 generic-y
--- 7.4 generated-y
--- 7.5 mandatory-y
- --- 7.6 subdir-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1265,7 +1264,7 @@ The pre-processing does:
- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
All headers under include/uapi/, include/generated/uapi/,
-arch/<arch>/include/uapi/asm/ and arch/<arch>/include/generated/uapi/asm/
+arch/<arch>/include/uapi/ and arch/<arch>/include/generated/uapi/
are exported.
A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
@@ -1338,18 +1337,6 @@ See subsequent chapter for the syntax of the Kbuild file.
The convention is to list one subdir per line and
preferably in alphabetic order.
- --- 7.6 subdir-y
-
- subdir-y may be used to specify a subdirectory to be exported.
-
- Example:
- #arch/cris/include/uapi/asm/Kbuild
- subdir-y += ../arch-v10/arch/
- subdir-y += ../arch-v32/arch/
-
- The convention is to list one subdir per line and
- preferably in alphabetic order.
-
=== 8 Kbuild Variables
The top Makefile exports the following variables:
diff --git a/Makefile b/Makefile
index 4cb6b0a1152b..e9ac52330215 100644
--- a/Makefile
+++ b/Makefile
@@ -1128,7 +1128,7 @@ firmware_install:
export INSTALL_HDR_PATH = $(objtree)/usr
# If we do an all arch process set dst to asm-$(hdr-arch)
-hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(hdr-arch), dst=include)
PHONY += archheaders
archheaders:
@@ -1149,7 +1149,7 @@ headers_install: __headers
$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
$(error Headers not exportable for the $(SRCARCH) architecture))
$(Q)$(MAKE) $(hdr-inst)=include/uapi
- $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst)
PHONY += headers_check_all
headers_check_all: headers_install_all
@@ -1158,7 +1158,7 @@ headers_check_all: headers_install_all
PHONY += headers_check
headers_check: headers_install
$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
- $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/ $(hdr-dst) HDRCHECK=1
# ---------------------------------------------------------------------------
# Kernel selftest
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
index d0c5471856e0..b15bf6bc0e94 100644
--- a/arch/cris/include/uapi/asm/Kbuild
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -1,5 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-subdir-y += ../arch-v10/arch/
-subdir-y += ../arch-v32/arch/
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index e0a50111e07f..0c74c3c5ebfa 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -2,5 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += ucontext.h
-
-subdir-y += ../arch
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 122945618ae2..1aeb4f45208f 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -2,7 +2,7 @@
# Installing headers
#
# All headers under include/uapi, include/generated/uapi,
-# arch/<arch>/include/uapi/asm and arch/<arch>/include/generated/uapi/asm are
+# arch/<arch>/include/uapi and arch/<arch>/include/generated/uapi are
# exported.
# They are preprocessed to remove __KERNEL__ section of the file.
#
@@ -30,7 +30,6 @@ installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
-subdirs += $(subdir-y)
header-files := $(notdir $(wildcard $(srcdir)/*.h))
header-files += $(notdir $(wildcard $(srcdir)/*.agh))
header-files := $(filter-out $(header-n), $(header-files))
--
2.8.1
This patch prepares the uapi export by fixing the following errors:
.../linux/btrfs_tree.h:283:2: error: #error "UUID items require BTRFS_UUID_SIZE == 16!"
#error "UUID items require BTRFS_UUID_SIZE == 16!"
.../linux/btrfs_tree.h:390:12: error: ‘BTRFS_UUID_SIZE’ undeclared here (not in a function)
__u8 uuid[BTRFS_UUID_SIZE];
^
.../linux/btrfs_tree.h:796:16: error: ‘BTRFS_DEV_STAT_VALUES_MAX’ undeclared here (not in a function)
__le64 values[BTRFS_DEV_STAT_VALUES_MAX];
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/uapi/linux/btrfs_tree.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
index 6a261cb52d95..6a754ada59af 100644
--- a/include/uapi/linux/btrfs_tree.h
+++ b/include/uapi/linux/btrfs_tree.h
@@ -2,6 +2,7 @@
#define _BTRFS_CTREE_H_
#include <linux/types.h>
+#include <linux/btrfs.h>
/*
* This header contains the structure definitions and constants used
--
2.8.1
This patch prepares the uapi export by fixing the following error:
.../linux/cryptouser.h:58:16: error: ‘CRYPTO_MAX_ALG_NAME’ undeclared here (not in a function)
char cru_name[CRYPTO_MAX_ALG_NAME];
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/linux/crypto.h | 2 +-
include/uapi/linux/crypto.h | 14 ++++++++++++++
include/uapi/linux/cryptouser.h | 6 ++++++
3 files changed, 21 insertions(+), 1 deletion(-)
create mode 100644 include/uapi/linux/crypto.h
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index c0b0cf3d2d2f..cc2425ba8527 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/uaccess.h>
+#include <uapi/linux/crypto.h>
/*
* Autoloaded crypto modules should only use a prefixed name to avoid allowing
@@ -123,7 +124,6 @@
/*
* Miscellaneous stuff.
*/
-#define CRYPTO_MAX_ALG_NAME 64
/*
* The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual
diff --git a/include/uapi/linux/crypto.h b/include/uapi/linux/crypto.h
new file mode 100644
index 000000000000..e342c5a5ac50
--- /dev/null
+++ b/include/uapi/linux/crypto.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2017 Nicolas Dichtel <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI_CRYPTO_H
+#define _UAPI_CRYPTO_H
+
+#define CRYPTO_MAX_ALG_NAME 64
+
+#endif /* _UAPI_CRYPTO_H */
diff --git a/include/uapi/linux/cryptouser.h b/include/uapi/linux/cryptouser.h
index c6a09c5261e7..ce3c64fb89e1 100644
--- a/include/uapi/linux/cryptouser.h
+++ b/include/uapi/linux/cryptouser.h
@@ -18,7 +18,11 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#ifndef _UAPI_CRYPTOUSER_H
+#define _UAPI_CRYPTOUSER_H
+
#include <linux/types.h>
+#include <linux/crypto.h>
/* Netlink configuration messages. */
enum {
@@ -121,3 +125,5 @@ struct crypto_report_acomp {
#define CRYPTO_REPORT_MAXSIZE (sizeof(struct crypto_user_alg) + \
sizeof(struct crypto_report_blkcipher))
+
+#endif /* _UAPI_CRYPTOUSER_H */
--
2.8.1
This patch prepares the uapi export by fixing the following error:
.../linux/smc_diag.h:6:27: fatal error: rdma/ib_verbs.h: No such file or directory
#include <rdma/ib_verbs.h>
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/rdma/ib_verbs.h | 3 +--
include/uapi/linux/smc_diag.h | 2 +-
include/uapi/rdma/ib_user_verbs.h | 2 ++
3 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 0f1813c13687..50f276a4afdc 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -61,6 +61,7 @@
#include <linux/mmu_notifier.h>
#include <linux/uaccess.h>
#include <linux/cgroup_rdma.h>
+#include <uapi/rdma/ib_user_verbs.h>
extern struct workqueue_struct *ib_wq;
extern struct workqueue_struct *ib_comp_wq;
@@ -1838,8 +1839,6 @@ enum ib_mad_result {
IB_MAD_RESULT_CONSUMED = 1 << 2 /* Packet consumed: stop processing */
};
-#define IB_DEVICE_NAME_MAX 64
-
struct ib_port_cache {
struct ib_pkey_cache *pkey;
struct ib_gid_table *gid;
diff --git a/include/uapi/linux/smc_diag.h b/include/uapi/linux/smc_diag.h
index 0063919fea34..87712bfaa9dd 100644
--- a/include/uapi/linux/smc_diag.h
+++ b/include/uapi/linux/smc_diag.h
@@ -3,7 +3,7 @@
#include <linux/types.h>
#include <linux/inet_diag.h>
-#include <rdma/ib_verbs.h>
+#include <rdma/ib_user_verbs.h>
/* Request structure */
struct smc_diag_req {
diff --git a/include/uapi/rdma/ib_user_verbs.h b/include/uapi/rdma/ib_user_verbs.h
index 997f904c7692..8edce2b65903 100644
--- a/include/uapi/rdma/ib_user_verbs.h
+++ b/include/uapi/rdma/ib_user_verbs.h
@@ -1124,4 +1124,6 @@ struct ib_uverbs_ex_destroy_rwq_ind_table {
__u32 ind_tbl_handle;
};
+#define IB_DEVICE_NAME_MAX 64
+
#endif /* IB_USER_VERBS_H */
--
2.8.1
Even if this file was not in an uapi directory, it was exported because
it was listed in the Kbuild file.
Fixes: b72e7464e4cf ("x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers")
Suggested-by: Borislav Petkov <[email protected]>
CC: Ingo Molnar <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
---
arch/x86/include/uapi/asm/Kbuild | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
index 3dec769cadf7..1c532b3f18ea 100644
--- a/arch/x86/include/uapi/asm/Kbuild
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -27,7 +27,6 @@ header-y += ldt.h
header-y += mce.h
header-y += mman.h
header-y += msgbuf.h
-header-y += msr-index.h
header-y += msr.h
header-y += mtrr.h
header-y += param.h
--
2.8.1
This header file is exported, but from a userland pov, it's just a wrapper
to asm-generic/setup.h.
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: Tobias Klauser <[email protected]>
---
arch/nios2/include/uapi/asm/Kbuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
index e0bb972a50d7..69c965304146 100644
--- a/arch/nios2/include/uapi/asm/Kbuild
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -2,4 +2,5 @@ include include/uapi/asm-generic/Kbuild.asm
header-y += elf.h
+generic-y += setup.h
generic-y += ucontext.h
--
2.8.1
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.
In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.
After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-avr32/kvm_para.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/cifs
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/genwqe
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/userio.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h
Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).
Thanks to Julien Floret <[email protected]> for the tip to get all
subdirs with a pure makefile command.
For the record, note that exported files for asm directories are a mix of
files listed by:
- include/uapi/asm-generic/Kbuild.asm;
- arch/<arch>/include/uapi/asm/Kbuild;
- arch/<arch>/include/asm/Kbuild.
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Acked-by: Russell King <[email protected]>
Acked-by: Mark Salter <[email protected]>
Acked-by: Michael Ellerman <[email protected]> (powerpc)
---
Documentation/kbuild/makefiles.txt | 66 ++--
arch/alpha/include/uapi/asm/Kbuild | 41 ---
arch/arc/include/uapi/asm/Kbuild | 3 -
arch/arm/include/uapi/asm/Kbuild | 17 -
arch/arm64/include/uapi/asm/Kbuild | 18 -
arch/avr32/include/uapi/asm/Kbuild | 20 --
arch/blackfin/include/uapi/asm/Kbuild | 17 -
arch/c6x/include/uapi/asm/Kbuild | 8 -
arch/cris/include/uapi/arch-v10/arch/Kbuild | 5 -
arch/cris/include/uapi/arch-v32/arch/Kbuild | 3 -
arch/cris/include/uapi/asm/Kbuild | 43 +--
arch/frv/include/uapi/asm/Kbuild | 33 --
arch/h8300/include/uapi/asm/Kbuild | 28 --
arch/hexagon/include/asm/Kbuild | 3 -
arch/hexagon/include/uapi/asm/Kbuild | 13 -
arch/ia64/include/uapi/asm/Kbuild | 45 ---
arch/m32r/include/uapi/asm/Kbuild | 31 --
arch/m68k/include/uapi/asm/Kbuild | 24 --
arch/metag/include/uapi/asm/Kbuild | 8 -
arch/microblaze/include/uapi/asm/Kbuild | 32 --
arch/mips/include/uapi/asm/Kbuild | 37 ---
arch/mn10300/include/uapi/asm/Kbuild | 32 --
arch/nios2/include/uapi/asm/Kbuild | 3 +-
arch/openrisc/include/asm/Kbuild | 3 -
arch/openrisc/include/uapi/asm/Kbuild | 8 -
arch/parisc/include/uapi/asm/Kbuild | 28 --
arch/powerpc/include/uapi/asm/Kbuild | 45 ---
arch/s390/include/uapi/asm/Kbuild | 53 ---
arch/score/include/asm/Kbuild | 3 -
arch/score/include/uapi/asm/Kbuild | 32 --
arch/sh/include/uapi/asm/Kbuild | 23 --
arch/sparc/include/uapi/asm/Kbuild | 48 ---
arch/tile/include/asm/Kbuild | 3 -
arch/tile/include/uapi/arch/Kbuild | 17 -
arch/tile/include/uapi/asm/Kbuild | 19 +-
arch/unicore32/include/uapi/asm/Kbuild | 6 -
arch/x86/include/uapi/asm/Kbuild | 58 ----
arch/xtensa/include/uapi/asm/Kbuild | 23 --
include/Kbuild | 2 -
include/asm-generic/Kbuild.asm | 1 -
include/scsi/fc/Kbuild | 0
include/uapi/Kbuild | 15 -
include/uapi/asm-generic/Kbuild | 36 --
include/uapi/asm-generic/Kbuild.asm | 62 ++--
include/uapi/drm/Kbuild | 23 --
include/uapi/linux/Kbuild | 493 +---------------------------
include/uapi/linux/android/Kbuild | 2 -
include/uapi/linux/byteorder/Kbuild | 3 -
include/uapi/linux/caif/Kbuild | 3 -
include/uapi/linux/can/Kbuild | 6 -
include/uapi/linux/dvb/Kbuild | 9 -
include/uapi/linux/hdlc/Kbuild | 2 -
include/uapi/linux/hsi/Kbuild | 2 -
include/uapi/linux/iio/Kbuild | 3 -
include/uapi/linux/isdn/Kbuild | 2 -
include/uapi/linux/mmc/Kbuild | 2 -
include/uapi/linux/netfilter/Kbuild | 89 -----
include/uapi/linux/netfilter/ipset/Kbuild | 5 -
include/uapi/linux/netfilter_arp/Kbuild | 3 -
include/uapi/linux/netfilter_bridge/Kbuild | 18 -
include/uapi/linux/netfilter_ipv4/Kbuild | 10 -
include/uapi/linux/netfilter_ipv6/Kbuild | 13 -
include/uapi/linux/nfsd/Kbuild | 6 -
include/uapi/linux/raid/Kbuild | 3 -
include/uapi/linux/spi/Kbuild | 2 -
include/uapi/linux/sunrpc/Kbuild | 2 -
include/uapi/linux/tc_act/Kbuild | 16 -
include/uapi/linux/tc_ematch/Kbuild | 5 -
include/uapi/linux/usb/Kbuild | 12 -
include/uapi/linux/wimax/Kbuild | 2 -
include/uapi/misc/Kbuild | 2 -
include/uapi/mtd/Kbuild | 6 -
include/uapi/rdma/Kbuild | 20 --
include/uapi/rdma/hfi/Kbuild | 3 -
include/uapi/scsi/Kbuild | 6 -
include/uapi/scsi/fc/Kbuild | 5 -
include/uapi/sound/Kbuild | 16 -
include/uapi/video/Kbuild | 4 -
include/uapi/xen/Kbuild | 5 -
include/video/Kbuild | 0
scripts/Makefile.headersinst | 51 +--
81 files changed, 113 insertions(+), 1756 deletions(-)
delete mode 100644 arch/cris/include/uapi/arch-v10/arch/Kbuild
delete mode 100644 arch/cris/include/uapi/arch-v32/arch/Kbuild
delete mode 100644 arch/tile/include/uapi/arch/Kbuild
delete mode 100644 include/Kbuild
delete mode 100644 include/asm-generic/Kbuild.asm
delete mode 100644 include/scsi/fc/Kbuild
delete mode 100644 include/uapi/Kbuild
delete mode 100644 include/uapi/asm-generic/Kbuild
delete mode 100644 include/uapi/drm/Kbuild
delete mode 100644 include/uapi/linux/android/Kbuild
delete mode 100644 include/uapi/linux/byteorder/Kbuild
delete mode 100644 include/uapi/linux/caif/Kbuild
delete mode 100644 include/uapi/linux/can/Kbuild
delete mode 100644 include/uapi/linux/dvb/Kbuild
delete mode 100644 include/uapi/linux/hdlc/Kbuild
delete mode 100644 include/uapi/linux/hsi/Kbuild
delete mode 100644 include/uapi/linux/iio/Kbuild
delete mode 100644 include/uapi/linux/isdn/Kbuild
delete mode 100644 include/uapi/linux/mmc/Kbuild
delete mode 100644 include/uapi/linux/netfilter/Kbuild
delete mode 100644 include/uapi/linux/netfilter/ipset/Kbuild
delete mode 100644 include/uapi/linux/netfilter_arp/Kbuild
delete mode 100644 include/uapi/linux/netfilter_bridge/Kbuild
delete mode 100644 include/uapi/linux/netfilter_ipv4/Kbuild
delete mode 100644 include/uapi/linux/netfilter_ipv6/Kbuild
delete mode 100644 include/uapi/linux/nfsd/Kbuild
delete mode 100644 include/uapi/linux/raid/Kbuild
delete mode 100644 include/uapi/linux/spi/Kbuild
delete mode 100644 include/uapi/linux/sunrpc/Kbuild
delete mode 100644 include/uapi/linux/tc_act/Kbuild
delete mode 100644 include/uapi/linux/tc_ematch/Kbuild
delete mode 100644 include/uapi/linux/usb/Kbuild
delete mode 100644 include/uapi/linux/wimax/Kbuild
delete mode 100644 include/uapi/misc/Kbuild
delete mode 100644 include/uapi/mtd/Kbuild
delete mode 100644 include/uapi/rdma/Kbuild
delete mode 100644 include/uapi/rdma/hfi/Kbuild
delete mode 100644 include/uapi/scsi/Kbuild
delete mode 100644 include/uapi/scsi/fc/Kbuild
delete mode 100644 include/uapi/sound/Kbuild
delete mode 100644 include/uapi/video/Kbuild
delete mode 100644 include/uapi/xen/Kbuild
delete mode 100644 include/video/Kbuild
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 37b525d329ae..91ffb391ed54 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -44,10 +44,12 @@ This document describes the Linux kernel Makefiles.
--- 6.11 Post-link pass
=== 7 Kbuild syntax for exported headers
- --- 7.1 header-y
+ --- 7.1 header-n
--- 7.2 genhdr-y
--- 7.3 generic-y
--- 7.4 generated-y
+ --- 7.5 mandatory-y
+ --- 7.6 subdir-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1235,7 +1237,7 @@ When kbuild executes, the following steps are followed (roughly):
that may be shared between individual architectures.
The recommended approach how to use a generic header file is
to list the file in the Kbuild file.
- See "7.4 generic-y" for further info on syntax etc.
+ See "7.3 generic-y" for further info on syntax etc.
--- 6.11 Post-link pass
@@ -1262,37 +1264,30 @@ The pre-processing does:
- drop include of compiler.h
- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
-Each relevant directory contains a file name "Kbuild" which specifies the
-headers to be exported.
-See subsequent chapter for the syntax of the Kbuild file.
-
- --- 7.1 header-y
-
- header-y specifies header files to be exported.
-
- Example:
- #include/linux/Kbuild
- header-y += usb/
- header-y += aio_abi.h
+All headers under include/uapi/, include/generated/uapi/,
+arch/<arch>/include/uapi/asm/ and arch/<arch>/include/generated/uapi/asm/
+are exported.
- The convention is to list one file per line and
- preferably in alphabetic order.
+A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
+arch/<arch>/include/asm/ to list asm files coming from asm-generic.
+See subsequent chapter for the syntax of the Kbuild file.
- header-y also specifies which subdirectories to visit.
- A subdirectory is identified by a trailing '/' which
- can be seen in the example above for the usb subdirectory.
+ --- 7.1 header-n
- Subdirectories are visited before their parent directories.
+ header-n is essentially used by include/uapi/linux/Kbuild to avoid
+ exporting specific headers (e.g. kvm.h) on architectures that do not
+ support it. It should be avoided as much as possible.
--- 7.2 genhdr-y
- genhdr-y specifies generated files to be exported.
- Generated files are special as they need to be looked
- up in another directory when doing 'make O=...' builds.
+ genhdr-y specifies asm files to be generated.
Example:
- #include/linux/Kbuild
- genhdr-y += version.h
+ #arch/x86/include/uapi/asm/Kbuild
+ genhdr-y += unistd_32.h
+ genhdr-y += unistd_64.h
+ genhdr-y += unistd_x32.h
+
--- 7.3 generic-y
@@ -1334,6 +1329,27 @@ See subsequent chapter for the syntax of the Kbuild file.
#arch/x86/include/asm/Kbuild
generated-y += syscalls_32.h
+ --- 7.5 mandatory-y
+
+ mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm
+ to define the minimun set of headers that must be exported in
+ include/asm.
+
+ The convention is to list one subdir per line and
+ preferably in alphabetic order.
+
+ --- 7.6 subdir-y
+
+ subdir-y may be used to specify a subdirectory to be exported.
+
+ Example:
+ #arch/cris/include/uapi/asm/Kbuild
+ subdir-y += ../arch-v10/arch/
+ subdir-y += ../arch-v32/arch/
+
+ The convention is to list one subdir per line and
+ preferably in alphabetic order.
+
=== 8 Kbuild Variables
The top Makefile exports the following variables:
diff --git a/arch/alpha/include/uapi/asm/Kbuild b/arch/alpha/include/uapi/asm/Kbuild
index d96f2ef5b639..b15bf6bc0e94 100644
--- a/arch/alpha/include/uapi/asm/Kbuild
+++ b/arch/alpha/include/uapi/asm/Kbuild
@@ -1,43 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += a.out.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += compiler.h
-header-y += console.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += fpu.h
-header-y += gentrap.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += pal.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += reg.h
-header-y += regdef.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sysinfo.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
index f50d02df78d5..b15bf6bc0e94 100644
--- a/arch/arc/include/uapi/asm/Kbuild
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -1,5 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += elf.h
-header-y += page.h
-header-y += cachectl.h
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 46a76cd6acb6..607f702c2d62 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -1,23 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += fcntl.h
-header-y += hwcap.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += perf_regs.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += unistd.h
genhdr-y += unistd-common.h
genhdr-y += unistd-oabi.h
genhdr-y += unistd-eabi.h
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
index 825b0fe51c2b..13a97aa2285f 100644
--- a/arch/arm64/include/uapi/asm/Kbuild
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -2,21 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += fcntl.h
-header-y += hwcap.h
-header-y += kvm_para.h
-header-y += perf_regs.h
-header-y += param.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += statfs.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild
index 08d8a3d76ea8..610395083364 100644
--- a/arch/avr32/include/uapi/asm/Kbuild
+++ b/arch/avr32/include/uapi/asm/Kbuild
@@ -1,26 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
generic-y += bitsperlong.h
generic-y += errno.h
generic-y += fcntl.h
diff --git a/arch/blackfin/include/uapi/asm/Kbuild b/arch/blackfin/include/uapi/asm/Kbuild
index 0bd28f77abc3..b15bf6bc0e94 100644
--- a/arch/blackfin/include/uapi/asm/Kbuild
+++ b/arch/blackfin/include/uapi/asm/Kbuild
@@ -1,19 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += bfin_sport.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += fcntl.h
-header-y += fixed_code.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
index e9bc2b2b8147..13a97aa2285f 100644
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -2,11 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/cris/include/uapi/arch-v10/arch/Kbuild b/arch/cris/include/uapi/arch-v10/arch/Kbuild
deleted file mode 100644
index 9048c87a782b..000000000000
--- a/arch/cris/include/uapi/arch-v10/arch/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += sv_addr.agh
-header-y += sv_addr_ag.h
-header-y += svinto.h
-header-y += user.h
diff --git a/arch/cris/include/uapi/arch-v32/arch/Kbuild b/arch/cris/include/uapi/arch-v32/arch/Kbuild
deleted file mode 100644
index 59efffd16b61..000000000000
--- a/arch/cris/include/uapi/arch-v32/arch/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += cryptocop.h
-header-y += user.h
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
index d5564a0ae66a..d0c5471856e0 100644
--- a/arch/cris/include/uapi/asm/Kbuild
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -1,44 +1,5 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += ../arch-v10/arch/
-header-y += ../arch-v32/arch/
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += elf.h
-header-y += elf_v10.h
-header-y += elf_v32.h
-header-y += errno.h
-header-y += ethernet.h
-header-y += etraxgpio.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += ptrace_v10.h
-header-y += ptrace_v32.h
-header-y += resource.h
-header-y += rs485.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sync_serial.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+subdir-y += ../arch-v10/arch/
+subdir-y += ../arch-v32/arch/
diff --git a/arch/frv/include/uapi/asm/Kbuild b/arch/frv/include/uapi/asm/Kbuild
index 42a2b33461c0..b15bf6bc0e94 100644
--- a/arch/frv/include/uapi/asm/Kbuild
+++ b/arch/frv/include/uapi/asm/Kbuild
@@ -1,35 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += registers.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
index fb6101a5d4f1..b15bf6bc0e94 100644
--- a/arch/h8300/include/uapi/asm/Kbuild
+++ b/arch/h8300/include/uapi/asm/Kbuild
@@ -1,30 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += siginfo.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index 797b64a4b80b..65f48073f8ac 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ucontext.h
-
generic-y += auxvec.h
generic-y += barrier.h
generic-y += bug.h
diff --git a/arch/hexagon/include/uapi/asm/Kbuild b/arch/hexagon/include/uapi/asm/Kbuild
index c31706c38631..b15bf6bc0e94 100644
--- a/arch/hexagon/include/uapi/asm/Kbuild
+++ b/arch/hexagon/include/uapi/asm/Kbuild
@@ -1,15 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += param.h
-header-y += ptrace.h
-header-y += registers.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += swab.h
-header-y += unistd.h
-header-y += user.h
diff --git a/arch/ia64/include/uapi/asm/Kbuild b/arch/ia64/include/uapi/asm/Kbuild
index 891002bbb995..13a97aa2285f 100644
--- a/arch/ia64/include/uapi/asm/Kbuild
+++ b/arch/ia64/include/uapi/asm/Kbuild
@@ -2,48 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += break.h
-header-y += byteorder.h
-header-y += cmpxchg.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += fpu.h
-header-y += gcc_intrin.h
-header-y += ia64regs.h
-header-y += intel_intrin.h
-header-y += intrinsics.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += perfmon.h
-header-y += perfmon_default_smpl.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += ptrace_offsets.h
-header-y += resource.h
-header-y += rse.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += ustack.h
diff --git a/arch/m32r/include/uapi/asm/Kbuild b/arch/m32r/include/uapi/asm/Kbuild
index 43937a61d6cf..b15bf6bc0e94 100644
--- a/arch/m32r/include/uapi/asm/Kbuild
+++ b/arch/m32r/include/uapi/asm/Kbuild
@@ -1,33 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild
index 6a2d257bdfb2..64368077235a 100644
--- a/arch/m68k/include/uapi/asm/Kbuild
+++ b/arch/m68k/include/uapi/asm/Kbuild
@@ -9,27 +9,3 @@ generic-y += socket.h
generic-y += sockios.h
generic-y += termbits.h
generic-y += termios.h
-
-header-y += a.out.h
-header-y += bootinfo.h
-header-y += bootinfo-amiga.h
-header-y += bootinfo-apollo.h
-header-y += bootinfo-atari.h
-header-y += bootinfo-hp300.h
-header-y += bootinfo-mac.h
-header-y += bootinfo-q40.h
-header-y += bootinfo-vme.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += fcntl.h
-header-y += ioctls.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/metag/include/uapi/asm/Kbuild b/arch/metag/include/uapi/asm/Kbuild
index ab78be2b6eb0..b29731ebd7a9 100644
--- a/arch/metag/include/uapi/asm/Kbuild
+++ b/arch/metag/include/uapi/asm/Kbuild
@@ -1,14 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += byteorder.h
-header-y += ech.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += swab.h
-header-y += unistd.h
-
generic-y += mman.h
generic-y += resource.h
generic-y += setup.h
diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild
index 1aac99f87df1..2178c78c7c1a 100644
--- a/arch/microblaze/include/uapi/asm/Kbuild
+++ b/arch/microblaze/include/uapi/asm/Kbuild
@@ -2,35 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += types.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += elf.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += unistd.h
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
index f2cf41461146..a0266feba9e6 100644
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -2,40 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += ipcbuf.h
-
-header-y += auxvec.h
-header-y += bitfield.h
-header-y += bitsperlong.h
-header-y += break.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += inst.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += sgidefs.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sysmips.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/mn10300/include/uapi/asm/Kbuild b/arch/mn10300/include/uapi/asm/Kbuild
index 040178cdb3eb..b15bf6bc0e94 100644
--- a/arch/mn10300/include/uapi/asm/Kbuild
+++ b/arch/mn10300/include/uapi/asm/Kbuild
@@ -1,34 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
index 69c965304146..374bd123329f 100644
--- a/arch/nios2/include/uapi/asm/Kbuild
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -1,6 +1,5 @@
+# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += elf.h
-
generic-y += setup.h
generic-y += ucontext.h
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index fb01873a5aad..1b533a107f19 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ucontext.h
-
generic-y += auxvec.h
generic-y += barrier.h
generic-y += bitsperlong.h
diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild
index 80761eb82b5f..b15bf6bc0e94 100644
--- a/arch/openrisc/include/uapi/asm/Kbuild
+++ b/arch/openrisc/include/uapi/asm/Kbuild
@@ -1,10 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += byteorder.h
-header-y += elf.h
-header-y += kvm_para.h
-header-y += param.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += unistd.h
diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild
index 348356c99514..3971c60a7e7f 100644
--- a/arch/parisc/include/uapi/asm/Kbuild
+++ b/arch/parisc/include/uapi/asm/Kbuild
@@ -2,31 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += resource.h
-
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += pdc.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index dab3717e3ea0..b15bf6bc0e94 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -1,47 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += bootx.h
-header-y += byteorder.h
-header-y += cputable.h
-header-y += eeh.h
-header-y += elf.h
-header-y += epapr_hcalls.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += nvram.h
-header-y += opal-prd.h
-header-y += param.h
-header-y += perf_event.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ps3fb.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += spu_info.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += tm.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild
index 6848ba5c1454..b15bf6bc0e94 100644
--- a/arch/s390/include/uapi/asm/Kbuild
+++ b/arch/s390/include/uapi/asm/Kbuild
@@ -1,55 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += chpid.h
-header-y += chsc.h
-header-y += clp.h
-header-y += cmb.h
-header-y += dasd.h
-header-y += debug.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += hypfs.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += kvm_perf.h
-header-y += kvm_virtio.h
-header-y += mman.h
-header-y += monwriter.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += pkey.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += qeth.h
-header-y += resource.h
-header-y += schid.h
-header-y += sclp_ctl.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sie.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += tape390.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += virtio-ccw.h
-header-y += vtoc.h
-header-y += zcrypt.h
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
index 926943a49ea5..4ee7fc77d23c 100644
--- a/arch/score/include/asm/Kbuild
+++ b/arch/score/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y +=
-
generic-y += barrier.h
generic-y += clkdev.h
generic-y += current.h
diff --git a/arch/score/include/uapi/asm/Kbuild b/arch/score/include/uapi/asm/Kbuild
index 040178cdb3eb..b15bf6bc0e94 100644
--- a/arch/score/include/uapi/asm/Kbuild
+++ b/arch/score/include/uapi/asm/Kbuild
@@ -1,34 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
index 60613ae78513..b15bf6bc0e94 100644
--- a/arch/sh/include/uapi/asm/Kbuild
+++ b/arch/sh/include/uapi/asm/Kbuild
@@ -1,25 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += cpu-features.h
-header-y += hw_breakpoint.h
-header-y += ioctls.h
-header-y += posix_types.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += ptrace.h
-header-y += ptrace_32.h
-header-y += ptrace_64.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += types.h
-header-y += unistd.h
-header-y += unistd_32.h
-header-y += unistd_64.h
diff --git a/arch/sparc/include/uapi/asm/Kbuild b/arch/sparc/include/uapi/asm/Kbuild
index b5843ee09fb5..b15bf6bc0e94 100644
--- a/arch/sparc/include/uapi/asm/Kbuild
+++ b/arch/sparc/include/uapi/asm/Kbuild
@@ -1,50 +1,2 @@
# UAPI Header export list
-# User exported sparc header files
-
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += apc.h
-header-y += asi.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += display7seg.h
-header-y += envctrl.h
-header-y += errno.h
-header-y += fbio.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += jsflash.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += openpromio.h
-header-y += param.h
-header-y += perfctr.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += psr.h
-header-y += psrcompat.h
-header-y += pstate.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += traps.h
-header-y += uctx.h
-header-y += unistd.h
-header-y += utrap.h
-header-y += watchdog.h
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index aa48b6eaff2d..61157a7e8532 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ../arch/
-
generic-y += bug.h
generic-y += bugs.h
generic-y += clkdev.h
diff --git a/arch/tile/include/uapi/arch/Kbuild b/arch/tile/include/uapi/arch/Kbuild
deleted file mode 100644
index 97dfbecec6b6..000000000000
--- a/arch/tile/include/uapi/arch/Kbuild
+++ /dev/null
@@ -1,17 +0,0 @@
-# UAPI Header export list
-header-y += abi.h
-header-y += chip.h
-header-y += chip_tilegx.h
-header-y += chip_tilepro.h
-header-y += icache.h
-header-y += interrupts.h
-header-y += interrupts_32.h
-header-y += interrupts_64.h
-header-y += opcode.h
-header-y += opcode_tilegx.h
-header-y += opcode_tilepro.h
-header-y += sim.h
-header-y += sim_def.h
-header-y += spr_def.h
-header-y += spr_def_32.h
-header-y += spr_def_64.h
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index c20db8e428bf..e0a50111e07f 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -1,21 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += hardwall.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += ucontext.h
-header-y += unistd.h
-
generic-y += ucontext.h
+
+subdir-y += ../arch
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
index 0514d7ad6855..13a97aa2285f 100644
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ b/arch/unicore32/include/uapi/asm/Kbuild
@@ -1,10 +1,4 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += unistd.h
-
generic-y += kvm_para.h
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
index 1c532b3f18ea..83b6e9a0dce4 100644
--- a/arch/x86/include/uapi/asm/Kbuild
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -4,61 +4,3 @@ include include/uapi/asm-generic/Kbuild.asm
genhdr-y += unistd_32.h
genhdr-y += unistd_64.h
genhdr-y += unistd_x32.h
-header-y += a.out.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += boot.h
-header-y += bootparam.h
-header-y += byteorder.h
-header-y += debugreg.h
-header-y += e820.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += hw_breakpoint.h
-header-y += hyperv.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += ist.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += kvm_perf.h
-header-y += ldt.h
-header-y += mce.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += msr.h
-header-y += mtrr.h
-header-y += param.h
-header-y += perf_regs.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += posix_types_x32.h
-header-y += prctl.h
-header-y += processor-flags.h
-header-y += ptrace-abi.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += sigcontext32.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += svm.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += vm86.h
-header-y += vmx.h
-header-y += vsyscall.h
diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild
index 56aad54e7fb7..b15bf6bc0e94 100644
--- a/arch/xtensa/include/uapi/asm/Kbuild
+++ b/arch/xtensa/include/uapi/asm/Kbuild
@@ -1,25 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += termbits.h
-header-y += types.h
-header-y += unistd.h
diff --git a/include/Kbuild b/include/Kbuild
deleted file mode 100644
index bab1145bc7a7..000000000000
--- a/include/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# Top-level Makefile calls into asm-$(ARCH)
-# List only non-arch directories below
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
deleted file mode 100644
index d2ee86b4c091..000000000000
--- a/include/asm-generic/Kbuild.asm
+++ /dev/null
@@ -1 +0,0 @@
-include include/uapi/asm-generic/Kbuild.asm
diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/include/uapi/Kbuild b/include/uapi/Kbuild
deleted file mode 100644
index 245aa6e05e6a..000000000000
--- a/include/uapi/Kbuild
+++ /dev/null
@@ -1,15 +0,0 @@
-# UAPI Header export list
-# Top-level Makefile calls into asm-$(ARCH)
-# List only non-arch directories below
-
-
-header-y += asm-generic/
-header-y += linux/
-header-y += sound/
-header-y += mtd/
-header-y += rdma/
-header-y += video/
-header-y += drm/
-header-y += xen/
-header-y += scsi/
-header-y += misc/
diff --git a/include/uapi/asm-generic/Kbuild b/include/uapi/asm-generic/Kbuild
deleted file mode 100644
index b73de7bb7a62..000000000000
--- a/include/uapi/asm-generic/Kbuild
+++ /dev/null
@@ -1,36 +0,0 @@
-# UAPI Header export list
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += errno-base.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += int-l64.h
-header-y += int-ll64.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman-common.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += shmparam.h
-header-y += siginfo.h
-header-y += signal-defs.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/include/uapi/asm-generic/Kbuild.asm b/include/uapi/asm-generic/Kbuild.asm
index fcd50b759217..8e6b335664f2 100644
--- a/include/uapi/asm-generic/Kbuild.asm
+++ b/include/uapi/asm-generic/Kbuild.asm
@@ -8,38 +8,38 @@ opt-header += a.out.h
#
# Headers that are mandatory in usr/include/asm/
#
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+mandatory-y += auxvec.h
+mandatory-y += bitsperlong.h
+mandatory-y += byteorder.h
+mandatory-y += errno.h
+mandatory-y += fcntl.h
+mandatory-y += ioctl.h
+mandatory-y += ioctls.h
+mandatory-y += ipcbuf.h
+mandatory-y += mman.h
+mandatory-y += msgbuf.h
+mandatory-y += param.h
+mandatory-y += poll.h
+mandatory-y += posix_types.h
+mandatory-y += ptrace.h
+mandatory-y += resource.h
+mandatory-y += sembuf.h
+mandatory-y += setup.h
+mandatory-y += shmbuf.h
+mandatory-y += sigcontext.h
+mandatory-y += siginfo.h
+mandatory-y += signal.h
+mandatory-y += socket.h
+mandatory-y += sockios.h
+mandatory-y += stat.h
+mandatory-y += statfs.h
+mandatory-y += swab.h
+mandatory-y += termbits.h
+mandatory-y += termios.h
+mandatory-y += types.h
+mandatory-y += unistd.h
-header-y += $(foreach hdr,$(opt-header), \
+mandatory-y += $(foreach hdr,$(opt-header), \
$(if \
$(wildcard \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/$(hdr) \
diff --git a/include/uapi/drm/Kbuild b/include/uapi/drm/Kbuild
deleted file mode 100644
index c97addd08f8c..000000000000
--- a/include/uapi/drm/Kbuild
+++ /dev/null
@@ -1,23 +0,0 @@
-# UAPI Header export list
-header-y += drm.h
-header-y += drm_fourcc.h
-header-y += drm_mode.h
-header-y += drm_sarea.h
-header-y += amdgpu_drm.h
-header-y += exynos_drm.h
-header-y += i810_drm.h
-header-y += i915_drm.h
-header-y += mga_drm.h
-header-y += nouveau_drm.h
-header-y += omap_drm.h
-header-y += qxl_drm.h
-header-y += r128_drm.h
-header-y += radeon_drm.h
-header-y += savage_drm.h
-header-y += sis_drm.h
-header-y += tegra_drm.h
-header-y += via_drm.h
-header-y += vmwgfx_drm.h
-header-y += msm_drm.h
-header-y += vc4_drm.h
-header-y += virtgpu_drm.h
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 1c80efb67d10..456cbe8a2aad 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -1,491 +1,16 @@
# UAPI Header export list
-header-y += android/
-header-y += byteorder/
-header-y += can/
-header-y += caif/
-header-y += dvb/
-header-y += hdlc/
-header-y += hsi/
-header-y += iio/
-header-y += isdn/
-header-y += mmc/
-header-y += nfsd/
-header-y += raid/
-header-y += spi/
-header-y += sunrpc/
-header-y += tc_act/
-header-y += tc_ematch/
-header-y += netfilter/
-header-y += netfilter_arp/
-header-y += netfilter_bridge/
-header-y += netfilter_ipv4/
-header-y += netfilter_ipv6/
-header-y += usb/
-header-y += wimax/
-genhdr-y += version.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
-header-y += a.out.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
+header-n += a.out.h
endif
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += am437x-vpfe.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atm_eni.h
-header-y += atm.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atm_nicstar.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += audit.h
-header-y += auto_fs4.h
-header-y += auto_fs.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += batman_adv.h
-header-y += baycom.h
-header-y += bcm933xx_hcs.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += blkzoned.h
-header-y += bpf_common.h
-header-y += bpf_perf_event.h
-header-y += bpf.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += bt-bmc.h
-header-y += btrfs.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cec.h
-header-y += cec-funcs.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += devlink.h
-header-y += dlmconstants.h
-header-y += dlm_device.h
-header-y += dlm.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dma-buf.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elfcore.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fou.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += genetlink.h
-header-y += gen_stats.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += gpio.h
-header-y += gsmmux.h
-header-y += gtp.h
-header-y += hdlcdrv.h
-header-y += hdlc.h
-header-y += hdreg.h
-header-y += hiddev.h
-header-y += hid.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hsr_netlink.h
-header-y += hyperv.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_macsec.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += ife.h
-header-y += igmp.h
-header-y += ila.h
-header-y += in6.h
-header-y += inet_diag.h
-header-y += in.h
-header-y += inotify.h
-header-y += input.h
-header-y += input-event-codes.h
-header-y += in_route.h
-header-y += ioctl.h
-header-y += ip6_tunnel.h
-header-y += ipc.h
-header-y += ip.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ip_vs.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn_divertif.h
-header-y += isdn.h
-header-y += isdnif.h
-header-y += isdn_ppp.h
-header-y += iso_fs.h
-header-y += ivtvfb.h
-header-y += ivtv.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kcmp.h
-header-y += kdev_t.h
-header-y += kd.h
-header-y += kernelcapi.h
-header-y += kernel.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
-header-y += kvm.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
+header-n += kvm.h
endif
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
-header-y += kvm_para.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
+header-n += kvm_para.h
endif
-
-header-y += hw_breakpoint.h
-header-y += l2tp.h
-header-y += libc-compat.h
-header-y += lirc.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += lwtunnel.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += media-bus-format.h
-header-y += mei.h
-header-y += membarrier.h
-header-y += memfd.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mic_common.h
-header-y += mic_ioctl.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mpls.h
-header-y += mpls_iptunnel.h
-header-y += mqueue.h
-header-y += mroute6.h
-header-y += mroute.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += nbd.h
-header-y += ncp_fs.h
-header-y += ncp.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += ndctl.h
-header-y += neighbour.h
-header-y += netconf.h
-header-y += netdevice.h
-header-y += net_dropmon.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += net.h
-header-y += netlink_diag.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += net_namespace.h
-header-y += net_tstamp.h
-header-y += nfc.h
-header-y += psample.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfsacl.h
-header-y += nfs_fs.h
-header-y += nfs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nl80211.h
-header-y += n_r3964.h
-header-y += nubus.h
-header-y += nvme_ioctl.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += openvswitch.h
-header-y += packet_diag.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pktcdvd.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_acl.h
-header-y += posix_acl_xattr.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp_defs.h
-header-y += ppp-ioctl.h
-header-y += pps.h
-header-y += prctl.h
-header-y += psci.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += rio_cm_cdev.h
-header-y += rio_mport_cdev.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += scif_ioctl.h
-header-y += screen_info.h
-header-y += sctp.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += seg6_genl.h
-header-y += seg6.h
-header-y += seg6_hmac.h
-header-y += seg6_iptunnel.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial_core.h
-header-y += serial.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signalfd.h
-header-y += signal.h
-header-y += smiapp.h
-header-y += snmp.h
-header-y += sock_diag.h
-header-y += socket.h
-header-y += sockios.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += soundcard.h
-header-y += sound.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sync_file.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += target_core_user.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += thermal.h
-header-y += time.h
-header-y += timerfd.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc_config.h
-header-y += tipc_netlink.h
-header-y += tipc.h
-header-y += toshiba.h
-header-y += tty_flags.h
-header-y += tty.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += uleds.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += unix_diag.h
-header-y += usbdevice_fs.h
-header-y += usbip.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_gpu.h
-header-y += virtio_ids.h
-header-y += virtio_input.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += virtio_scsi.h
-header-y += virtio_types.h
-header-y += virtio_vsock.h
-header-y += virtio_crypto.h
-header-y += vm_sockets.h
-header-y += vt.h
-header-y += vtpm_proxy.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
-header-y += xilinx-v4l2-controls.h
-header-y += zorro.h
-header-y += zorro_ids.h
-header-y += userfaultfd.h
diff --git a/include/uapi/linux/android/Kbuild b/include/uapi/linux/android/Kbuild
deleted file mode 100644
index ca011eec252a..000000000000
--- a/include/uapi/linux/android/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += binder.h
diff --git a/include/uapi/linux/byteorder/Kbuild b/include/uapi/linux/byteorder/Kbuild
deleted file mode 100644
index 619225b9ff2e..000000000000
--- a/include/uapi/linux/byteorder/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += big_endian.h
-header-y += little_endian.h
diff --git a/include/uapi/linux/caif/Kbuild b/include/uapi/linux/caif/Kbuild
deleted file mode 100644
index 43396612d3a3..000000000000
--- a/include/uapi/linux/caif/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += caif_socket.h
-header-y += if_caif.h
diff --git a/include/uapi/linux/can/Kbuild b/include/uapi/linux/can/Kbuild
deleted file mode 100644
index 21c91bf25a29..000000000000
--- a/include/uapi/linux/can/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += bcm.h
-header-y += error.h
-header-y += gw.h
-header-y += netlink.h
-header-y += raw.h
diff --git a/include/uapi/linux/dvb/Kbuild b/include/uapi/linux/dvb/Kbuild
deleted file mode 100644
index d40942cfc627..000000000000
--- a/include/uapi/linux/dvb/Kbuild
+++ /dev/null
@@ -1,9 +0,0 @@
-# UAPI Header export list
-header-y += audio.h
-header-y += ca.h
-header-y += dmx.h
-header-y += frontend.h
-header-y += net.h
-header-y += osd.h
-header-y += version.h
-header-y += video.h
diff --git a/include/uapi/linux/hdlc/Kbuild b/include/uapi/linux/hdlc/Kbuild
deleted file mode 100644
index 8c1d2cb75e33..000000000000
--- a/include/uapi/linux/hdlc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += ioctl.h
diff --git a/include/uapi/linux/hsi/Kbuild b/include/uapi/linux/hsi/Kbuild
deleted file mode 100644
index a16a00544258..000000000000
--- a/include/uapi/linux/hsi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += hsi_char.h cs-protocol.h
diff --git a/include/uapi/linux/iio/Kbuild b/include/uapi/linux/iio/Kbuild
deleted file mode 100644
index 86f76d84c44f..000000000000
--- a/include/uapi/linux/iio/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += events.h
-header-y += types.h
diff --git a/include/uapi/linux/isdn/Kbuild b/include/uapi/linux/isdn/Kbuild
deleted file mode 100644
index 89e52850bf29..000000000000
--- a/include/uapi/linux/isdn/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += capicmd.h
diff --git a/include/uapi/linux/mmc/Kbuild b/include/uapi/linux/mmc/Kbuild
deleted file mode 100644
index 8c1d2cb75e33..000000000000
--- a/include/uapi/linux/mmc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += ioctl.h
diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild
deleted file mode 100644
index 03f194aeadc5..000000000000
--- a/include/uapi/linux/netfilter/Kbuild
+++ /dev/null
@@ -1,89 +0,0 @@
-# UAPI Header export list
-header-y += ipset/
-header-y += nf_conntrack_common.h
-header-y += nf_conntrack_ftp.h
-header-y += nf_conntrack_sctp.h
-header-y += nf_conntrack_tcp.h
-header-y += nf_conntrack_tuple_common.h
-header-y += nf_log.h
-header-y += nf_tables.h
-header-y += nf_tables_compat.h
-header-y += nf_nat.h
-header-y += nfnetlink.h
-header-y += nfnetlink_acct.h
-header-y += nfnetlink_compat.h
-header-y += nfnetlink_conntrack.h
-header-y += nfnetlink_cthelper.h
-header-y += nfnetlink_cttimeout.h
-header-y += nfnetlink_log.h
-header-y += nfnetlink_queue.h
-header-y += x_tables.h
-header-y += xt_AUDIT.h
-header-y += xt_CHECKSUM.h
-header-y += xt_CLASSIFY.h
-header-y += xt_CONNMARK.h
-header-y += xt_CONNSECMARK.h
-header-y += xt_CT.h
-header-y += xt_DSCP.h
-header-y += xt_HMARK.h
-header-y += xt_IDLETIMER.h
-header-y += xt_LED.h
-header-y += xt_LOG.h
-header-y += xt_MARK.h
-header-y += xt_NFLOG.h
-header-y += xt_NFQUEUE.h
-header-y += xt_RATEEST.h
-header-y += xt_SECMARK.h
-header-y += xt_SYNPROXY.h
-header-y += xt_TCPMSS.h
-header-y += xt_TCPOPTSTRIP.h
-header-y += xt_TEE.h
-header-y += xt_TPROXY.h
-header-y += xt_addrtype.h
-header-y += xt_bpf.h
-header-y += xt_cgroup.h
-header-y += xt_cluster.h
-header-y += xt_comment.h
-header-y += xt_connbytes.h
-header-y += xt_connlabel.h
-header-y += xt_connlimit.h
-header-y += xt_connmark.h
-header-y += xt_conntrack.h
-header-y += xt_cpu.h
-header-y += xt_dccp.h
-header-y += xt_devgroup.h
-header-y += xt_dscp.h
-header-y += xt_ecn.h
-header-y += xt_esp.h
-header-y += xt_hashlimit.h
-header-y += xt_helper.h
-header-y += xt_ipcomp.h
-header-y += xt_iprange.h
-header-y += xt_ipvs.h
-header-y += xt_l2tp.h
-header-y += xt_length.h
-header-y += xt_limit.h
-header-y += xt_mac.h
-header-y += xt_mark.h
-header-y += xt_multiport.h
-header-y += xt_nfacct.h
-header-y += xt_osf.h
-header-y += xt_owner.h
-header-y += xt_physdev.h
-header-y += xt_pkttype.h
-header-y += xt_policy.h
-header-y += xt_quota.h
-header-y += xt_rateest.h
-header-y += xt_realm.h
-header-y += xt_recent.h
-header-y += xt_rpfilter.h
-header-y += xt_sctp.h
-header-y += xt_set.h
-header-y += xt_socket.h
-header-y += xt_state.h
-header-y += xt_statistic.h
-header-y += xt_string.h
-header-y += xt_tcpmss.h
-header-y += xt_tcpudp.h
-header-y += xt_time.h
-header-y += xt_u32.h
diff --git a/include/uapi/linux/netfilter/ipset/Kbuild b/include/uapi/linux/netfilter/ipset/Kbuild
deleted file mode 100644
index d2680423d9ab..000000000000
--- a/include/uapi/linux/netfilter/ipset/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += ip_set.h
-header-y += ip_set_bitmap.h
-header-y += ip_set_hash.h
-header-y += ip_set_list.h
diff --git a/include/uapi/linux/netfilter_arp/Kbuild b/include/uapi/linux/netfilter_arp/Kbuild
deleted file mode 100644
index 62d5637cc0ac..000000000000
--- a/include/uapi/linux/netfilter_arp/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += arp_tables.h
-header-y += arpt_mangle.h
diff --git a/include/uapi/linux/netfilter_bridge/Kbuild b/include/uapi/linux/netfilter_bridge/Kbuild
deleted file mode 100644
index 0fbad8ef96de..000000000000
--- a/include/uapi/linux/netfilter_bridge/Kbuild
+++ /dev/null
@@ -1,18 +0,0 @@
-# UAPI Header export list
-header-y += ebt_802_3.h
-header-y += ebt_among.h
-header-y += ebt_arp.h
-header-y += ebt_arpreply.h
-header-y += ebt_ip.h
-header-y += ebt_ip6.h
-header-y += ebt_limit.h
-header-y += ebt_log.h
-header-y += ebt_mark_m.h
-header-y += ebt_mark_t.h
-header-y += ebt_nat.h
-header-y += ebt_nflog.h
-header-y += ebt_pkttype.h
-header-y += ebt_redirect.h
-header-y += ebt_stp.h
-header-y += ebt_vlan.h
-header-y += ebtables.h
diff --git a/include/uapi/linux/netfilter_ipv4/Kbuild b/include/uapi/linux/netfilter_ipv4/Kbuild
deleted file mode 100644
index ecb291df390e..000000000000
--- a/include/uapi/linux/netfilter_ipv4/Kbuild
+++ /dev/null
@@ -1,10 +0,0 @@
-# UAPI Header export list
-header-y += ip_tables.h
-header-y += ipt_CLUSTERIP.h
-header-y += ipt_ECN.h
-header-y += ipt_LOG.h
-header-y += ipt_REJECT.h
-header-y += ipt_TTL.h
-header-y += ipt_ah.h
-header-y += ipt_ecn.h
-header-y += ipt_ttl.h
diff --git a/include/uapi/linux/netfilter_ipv6/Kbuild b/include/uapi/linux/netfilter_ipv6/Kbuild
deleted file mode 100644
index 75a668ca2353..000000000000
--- a/include/uapi/linux/netfilter_ipv6/Kbuild
+++ /dev/null
@@ -1,13 +0,0 @@
-# UAPI Header export list
-header-y += ip6_tables.h
-header-y += ip6t_HL.h
-header-y += ip6t_LOG.h
-header-y += ip6t_NPT.h
-header-y += ip6t_REJECT.h
-header-y += ip6t_ah.h
-header-y += ip6t_frag.h
-header-y += ip6t_hl.h
-header-y += ip6t_ipv6header.h
-header-y += ip6t_mh.h
-header-y += ip6t_opts.h
-header-y += ip6t_rt.h
diff --git a/include/uapi/linux/nfsd/Kbuild b/include/uapi/linux/nfsd/Kbuild
deleted file mode 100644
index c11bc404053c..000000000000
--- a/include/uapi/linux/nfsd/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += cld.h
-header-y += debug.h
-header-y += export.h
-header-y += nfsfh.h
-header-y += stats.h
diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild
deleted file mode 100644
index e2c3d25405d7..000000000000
--- a/include/uapi/linux/raid/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += md_p.h
-header-y += md_u.h
diff --git a/include/uapi/linux/spi/Kbuild b/include/uapi/linux/spi/Kbuild
deleted file mode 100644
index 0cc747eff165..000000000000
--- a/include/uapi/linux/spi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += spidev.h
diff --git a/include/uapi/linux/sunrpc/Kbuild b/include/uapi/linux/sunrpc/Kbuild
deleted file mode 100644
index 8e02e47c20fb..000000000000
--- a/include/uapi/linux/sunrpc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += debug.h
diff --git a/include/uapi/linux/tc_act/Kbuild b/include/uapi/linux/tc_act/Kbuild
deleted file mode 100644
index ba62ddf0e58a..000000000000
--- a/include/uapi/linux/tc_act/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-# UAPI Header export list
-header-y += tc_csum.h
-header-y += tc_defact.h
-header-y += tc_gact.h
-header-y += tc_ipt.h
-header-y += tc_mirred.h
-header-y += tc_sample.h
-header-y += tc_nat.h
-header-y += tc_pedit.h
-header-y += tc_skbedit.h
-header-y += tc_vlan.h
-header-y += tc_bpf.h
-header-y += tc_connmark.h
-header-y += tc_ife.h
-header-y += tc_tunnel_key.h
-header-y += tc_skbmod.h
diff --git a/include/uapi/linux/tc_ematch/Kbuild b/include/uapi/linux/tc_ematch/Kbuild
deleted file mode 100644
index 53fca3925535..000000000000
--- a/include/uapi/linux/tc_ematch/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += tc_em_cmp.h
-header-y += tc_em_meta.h
-header-y += tc_em_nbyte.h
-header-y += tc_em_text.h
diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild
deleted file mode 100644
index 4cc4d6e7e523..000000000000
--- a/include/uapi/linux/usb/Kbuild
+++ /dev/null
@@ -1,12 +0,0 @@
-# UAPI Header export list
-header-y += audio.h
-header-y += cdc.h
-header-y += cdc-wdm.h
-header-y += ch11.h
-header-y += ch9.h
-header-y += functionfs.h
-header-y += g_printer.h
-header-y += gadgetfs.h
-header-y += midi.h
-header-y += tmc.h
-header-y += video.h
diff --git a/include/uapi/linux/wimax/Kbuild b/include/uapi/linux/wimax/Kbuild
deleted file mode 100644
index 1c97be49971f..000000000000
--- a/include/uapi/linux/wimax/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += i2400m.h
diff --git a/include/uapi/misc/Kbuild b/include/uapi/misc/Kbuild
deleted file mode 100644
index e96cae7d58c9..000000000000
--- a/include/uapi/misc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# misc Header export list
-header-y += cxl.h
diff --git a/include/uapi/mtd/Kbuild b/include/uapi/mtd/Kbuild
deleted file mode 100644
index 5a691e10cd0e..000000000000
--- a/include/uapi/mtd/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += inftl-user.h
-header-y += mtd-abi.h
-header-y += mtd-user.h
-header-y += nftl-user.h
-header-y += ubi-user.h
diff --git a/include/uapi/rdma/Kbuild b/include/uapi/rdma/Kbuild
deleted file mode 100644
index 1e0af1ff75c3..000000000000
--- a/include/uapi/rdma/Kbuild
+++ /dev/null
@@ -1,20 +0,0 @@
-# UAPI Header export list
-header-y += ib_user_cm.h
-header-y += rdma_user_ioctl.h
-header-y += ib_user_mad.h
-header-y += ib_user_sa.h
-header-y += ib_user_verbs.h
-header-y += rdma_netlink.h
-header-y += rdma_user_cm.h
-header-y += hfi/
-header-y += rdma_user_rxe.h
-header-y += cxgb3-abi.h
-header-y += cxgb4-abi.h
-header-y += mlx4-abi.h
-header-y += mlx5-abi.h
-header-y += mthca-abi.h
-header-y += nes-abi.h
-header-y += ocrdma-abi.h
-header-y += hns-abi.h
-header-y += vmw_pvrdma-abi.h
-header-y += qedr-abi.h
diff --git a/include/uapi/rdma/hfi/Kbuild b/include/uapi/rdma/hfi/Kbuild
deleted file mode 100644
index b65b0b3a5f63..000000000000
--- a/include/uapi/rdma/hfi/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += hfi1_user.h
-header-y += hfi1_ioctl.h
diff --git a/include/uapi/scsi/Kbuild b/include/uapi/scsi/Kbuild
deleted file mode 100644
index d791e0ad509d..000000000000
--- a/include/uapi/scsi/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += fc/
-header-y += scsi_bsg_fc.h
-header-y += scsi_netlink.h
-header-y += scsi_netlink_fc.h
-header-y += cxlflash_ioctl.h
diff --git a/include/uapi/scsi/fc/Kbuild b/include/uapi/scsi/fc/Kbuild
deleted file mode 100644
index 5ead9fac265c..000000000000
--- a/include/uapi/scsi/fc/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += fc_els.h
-header-y += fc_fs.h
-header-y += fc_gs.h
-header-y += fc_ns.h
diff --git a/include/uapi/sound/Kbuild b/include/uapi/sound/Kbuild
deleted file mode 100644
index 9578d8bdbf31..000000000000
--- a/include/uapi/sound/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-# UAPI Header export list
-header-y += asequencer.h
-header-y += asoc.h
-header-y += asound.h
-header-y += asound_fm.h
-header-y += compress_offload.h
-header-y += compress_params.h
-header-y += emu10k1.h
-header-y += firewire.h
-header-y += hdsp.h
-header-y += hdspm.h
-header-y += sb16_csp.h
-header-y += sfnt_info.h
-header-y += tlv.h
-header-y += usb_stream.h
-header-y += snd_sst_tokens.h
diff --git a/include/uapi/video/Kbuild b/include/uapi/video/Kbuild
deleted file mode 100644
index ac7203bb32cc..000000000000
--- a/include/uapi/video/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-# UAPI Header export list
-header-y += edid.h
-header-y += sisfb.h
-header-y += uvesafb.h
diff --git a/include/uapi/xen/Kbuild b/include/uapi/xen/Kbuild
deleted file mode 100644
index 5c459628e8c7..000000000000
--- a/include/uapi/xen/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += evtchn.h
-header-y += gntalloc.h
-header-y += gntdev.h
-header-y += privcmd.h
diff --git a/include/video/Kbuild b/include/video/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 876b42cfede4..122945618ae2 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -1,17 +1,19 @@
# ==========================================================================
# Installing headers
#
-# header-y - list files to be installed. They are preprocessed
-# to remove __KERNEL__ section of the file
-# genhdr-y - Same as header-y but in a generated/ directory
+# All headers under include/uapi, include/generated/uapi,
+# arch/<arch>/include/uapi/asm and arch/<arch>/include/generated/uapi/asm are
+# exported.
+# They are preprocessed to remove __KERNEL__ section of the file.
#
# ==========================================================================
# generated header directory
gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
+# Kbuild file is optional
kbuild-file := $(srctree)/$(obj)/Kbuild
-include $(kbuild-file)
+-include $(kbuild-file)
# called may set destination dir (when installing to asm/)
_dst := $(if $(dst),$(dst),$(obj))
@@ -25,9 +27,15 @@ include scripts/Kbuild.include
installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
-header-y := $(sort $(header-y))
-subdirs := $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y := $(filter-out %/, $(header-y))
+srcdir := $(srctree)/$(obj)
+gendir := $(objtree)/$(gen)
+subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
+subdirs += $(subdir-y)
+header-files := $(notdir $(wildcard $(srcdir)/*.h))
+header-files += $(notdir $(wildcard $(srcdir)/*.agh))
+header-files := $(filter-out $(header-n), $(header-files))
+genhdr-files := $(notdir $(wildcard $(gendir)/*.h))
+genhdr-files := $(filter-out $(header-files), $(genhdr-files))
# files used to track state of install/check
install-file := $(installdir)/.install
@@ -35,25 +43,20 @@ check-file := $(installdir)/.check
# generic-y list all files an architecture uses from asm-generic
# Use this to build a list of headers which require a wrapper
-wrapper-files := $(filter $(header-y), $(generic-y))
-
-srcdir := $(srctree)/$(obj)
-gendir := $(objtree)/$(gen)
+generic-files := $(notdir $(wildcard $(srctree)/include/uapi/asm-generic/*.h))
+wrapper-files := $(filter $(generic-files), $(generic-y))
+wrapper-files := $(filter-out $(header-files), $(wrapper-files))
# all headers files for this dir
-header-y := $(filter-out $(generic-y), $(header-y))
-all-files := $(header-y) $(genhdr-y) $(wrapper-files)
+all-files := $(header-files) $(genhdr-files) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))
-# Check that all expected files exist
-$(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)),, \
- $(error Missing UAPI file $(srcdir)/$(hdr)) \
- ))
-$(foreach hdr, $(genhdr-y), \
- $(if $(wildcard $(gendir)/$(hdr)),, \
- $(error Missing generated UAPI file $(gendir)/$(hdr)) \
- ))
+ifneq ($(mandatory-y),)
+missing := $(filter-out $(all-files),$(mandatory-y))
+ifneq ($(missing),)
+$(error Some mandatory headers ($(missing)) are missing in $(obj))
+endif
+endif
# Work out what needs to be removed
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
@@ -67,8 +70,8 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-y); \
- $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-y); \
+ $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-files); \
+ $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-files); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
--
2.8.1
On Thu, Mar 02, 2017 at 05:56:39PM +0100, Nicolas Dichtel wrote:
> This patch prepares the uapi export by fixing the following error:
>
> .../linux/cryptouser.h:58:16: error: ‘CRYPTO_MAX_ALG_NAME’ undeclared here (not in a function)
> char cru_name[CRYPTO_MAX_ALG_NAME];
>
> Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Herbert Xu <[email protected]>
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
Le 02/03/2017 à 17:56, Nicolas Dichtel a écrit :
> Patches #1 and #2 are just cleanup: some exported headers were still under
> a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
> not under an uapi directory.
> After these three patches, all exported headers are under an uapi directory:
> path #4 stops searching files in non uapi directories.
> The patch #5 was spotted by code review: there is no in-tree user of this
> functionality.
> Patch #6 fixes some warnings/errors reported by 0-day tests.
> Patch #7 to #9 fix some errors when the corresponding files are included by
> userland.
> Patches #10 and #11 remove the need to list explicitly headers. Now all files
> under an uapi directory are exported.
>
> This series has been tested with a 'make headers_install' on x86 and a
> 'make headers_install_all'. I've checked the result of both commands.
>
> This patch is built against linus tree. If I must rebase it against the kbuild
> tree, just tell me.
> Michal, is this series going through your tree?
I'm a bit pushy on this, but it would be nice to get this series in before the
rc1. In fact, it would certainly be better to have this living some times in
-next, but it would probably generate a lot of conflicts in linux-next. OTOH
those conflicts would be easy to solve.
Regards,
Nicolas
Le 02/03/2017 à 17:56, Nicolas Dichtel a écrit :
> Patches #1 and #2 are just cleanup: some exported headers were still under
> a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
> not under an uapi directory.
> After these three patches, all exported headers are under an uapi directory:
> path #4 stops searching files in non uapi directories.
> The patch #5 was spotted by code review: there is no in-tree user of this
> functionality.
> Patch #6 fixes some warnings/errors reported by 0-day tests.
> Patch #7 to #9 fix some errors when the corresponding files are included by
> userland.
> Patches #10 and #11 remove the need to list explicitly headers. Now all files
> under an uapi directory are exported.
>
> This series has been tested with a 'make headers_install' on x86 and a
> 'make headers_install_all'. I've checked the result of both commands.
>
> This patch is built against linus tree. If I must rebase it against the kbuild
> tree, just tell me.
> Michal, is this series going through your tree?
Still waiting to know who may take this series in its tree ;-)
kbuild tree has not been updated since two months (4.10-rc1) :/
Regards,
Nicolas
Hi Nicolas,
2017-03-11 1:34 GMT+09:00 Nicolas Dichtel <[email protected]>:
> Le 02/03/2017 à 17:56, Nicolas Dichtel a écrit :
>> Patches #1 and #2 are just cleanup: some exported headers were still under
>> a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
>> not under an uapi directory.
>> After these three patches, all exported headers are under an uapi directory:
>> path #4 stops searching files in non uapi directories.
>> The patch #5 was spotted by code review: there is no in-tree user of this
>> functionality.
>> Patch #6 fixes some warnings/errors reported by 0-day tests.
>> Patch #7 to #9 fix some errors when the corresponding files are included by
>> userland.
>> Patches #10 and #11 remove the need to list explicitly headers. Now all files
>> under an uapi directory are exported.
>>
>> This series has been tested with a 'make headers_install' on x86 and a
>> 'make headers_install_all'. I've checked the result of both commands.
>>
>> This patch is built against linus tree. If I must rebase it against the kbuild
>> tree, just tell me.
>> Michal, is this series going through your tree?
> Still waiting to know who may take this series in its tree ;-)
I will take care of this.
> kbuild tree has not been updated since two months (4.10-rc1) :/
Michal's tree is not active these days.
Going forward, I will queue up Kbuild patches in my repository.
BTW, this series does not apply cleanly.
If you could rebase it onto v4.11-rc1 tag,
it would be helpful.
Thanks!
--
Best Regards
Masahiro Yamada
Le 11/03/2017 à 06:43, Masahiro Yamada a écrit :
[snip]
>
> I will take care of this.
Thank you.
>
>
>
>> kbuild tree has not been updated since two months (4.10-rc1) :/
>
> Michal's tree is not active these days.
Ok, I didn't know that.
> Going forward, I will queue up Kbuild patches in my repository.
>
>
>
> BTW, this series does not apply cleanly.
>
> If you could rebase it onto v4.11-rc1 tag,
> it would be helpful.
You really want this on top of 4.11-rc1 or the last linus tag, ie v4.11-rc2?
Regards,
Nicolas
Ni Nicolas,
2017-03-14 1:57 GMT+09:00 Nicolas Dichtel <[email protected]>:
>> BTW, this series does not apply cleanly.
>>
>> If you could rebase it onto v4.11-rc1 tag,
>> it would be helpful.
> You really want this on top of 4.11-rc1 or the last linus tag, ie v4.11-rc2?
>
Basically, I queue up patches based on -rc1 tag
unless there is a particular reason for otherwise.
If it is based on -rc1, will it cause conflicts with Linus tree?
--
Best Regards
Masahiro Yamada
Le 14/03/2017 à 06:38, Masahiro Yamada a écrit :
> Ni Nicolas,
>
>
> 2017-03-14 1:57 GMT+09:00 Nicolas Dichtel <[email protected]>:
>>> BTW, this series does not apply cleanly.
>>>
>>> If you could rebase it onto v4.11-rc1 tag,
>>> it would be helpful.
>> You really want this on top of 4.11-rc1 or the last linus tag, ie v4.11-rc2?
>>
>
> Basically, I queue up patches based on -rc1 tag
> unless there is a particular reason for otherwise.
Ok, thank you for the explanation.
>
> If it is based on -rc1, will it cause conflicts with Linus tree?
I will check and let you know in the v10 submission.
Thank you,
Nicolas
Patches #1 and #2 are just cleanup: some exported headers were still under
a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
not under an uapi directory.
After these three patches, all exported headers are under an uapi directory:
path #4 stops searching files in non uapi directories.
The patch #5 was spotted by code review: there is no in-tree user of this
functionality.
Patch #6 fixes some warnings/errors reported by 0-day tests.
Patch #7 to #9 fix some errors when the corresponding files are included by
userland.
Patches #10 and #11 remove the need to list explicitly headers. Now all files
under an uapi directory are exported.
This series has been tested with a 'make headers_install' on x86 and a
'make headers_install_all'. I've checked the result of both commands.
This patch is built on top of masahiroy/linux-kbuild.git#for-next (v4.11-rc1).
I didn't find any conflict with v4.11-rc2.
v9 -> v10:
- rebase on top of masahiroy/linux-kbuild.git#for-next
- patch #4 & #10: fix dependency check
- fix some typos in commits logs
v8 -> v9:
- rebase on top of linus tree
- patch #8: add include/uapi/linux/crypto.h
v7 -> v8:
- rebase on top of linus tree
- add patch #7, #8 and #9
v6 -> v7:
- rebase on top of linus tree
- patch #7: remove autogenerated files from the list in the commit log
v5 -> v6:
- patch #6: remove change of include/uapi/linux/media.h
- patch #7: fix hdr export when 'make O=' is used (look for genhdr files in
the right directory)
- patch #8: fix 'make headers_check'
v4 -> v5:
- patch #3: get back to v3 (don't export msr-index.h)
- patch #6: new in this version
- patch #7: fix compilation by introducing header-n
v3 -> v4:
- first patch has been included
- patch #4: get back to v2 and remove arch/x86/include/asm/msr-index.h
v2 -> v3:
- patch #1: remove arch/arm/include/asm/types.h
- patch #2: remove arch/h8300/include/asm/bitsperlong.h
- patch #3: remove arch/nios2/include/uapi/asm/setup.h
- patch #4: don't export msr-index.h
- patch #5: fix a typo: s/unput-files3-name/input-files3-name
- patch #6: no change
- patch #7: fix include/uapi/asm-generic/Kbuild.asm by introducing mandatory-y
- add patch #8
v1 -> v2:
- add patch #1 to #6
- patch #7: remove use of header-y
Comments are welcomed,
Nicolas
This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.
The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.
Note that only cris and tile have more directories than only asm:
- arch-v[10|32] for cris;
- arch for tile.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
Documentation/kbuild/makefiles.txt | 15 +--------------
Makefile | 6 +++---
arch/cris/include/uapi/asm/Kbuild | 3 ---
arch/tile/include/uapi/asm/Kbuild | 2 --
scripts/Makefile.headersinst | 3 +--
5 files changed, 5 insertions(+), 24 deletions(-)
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 91ffb391ed54..223b33d5195a 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -49,7 +49,6 @@ This document describes the Linux kernel Makefiles.
--- 7.3 generic-y
--- 7.4 generated-y
--- 7.5 mandatory-y
- --- 7.6 subdir-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1265,7 +1264,7 @@ The pre-processing does:
- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
All headers under include/uapi/, include/generated/uapi/,
-arch/<arch>/include/uapi/asm/ and arch/<arch>/include/generated/uapi/asm/
+arch/<arch>/include/uapi/ and arch/<arch>/include/generated/uapi/
are exported.
A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
@@ -1338,18 +1337,6 @@ See subsequent chapter for the syntax of the Kbuild file.
The convention is to list one subdir per line and
preferably in alphabetic order.
- --- 7.6 subdir-y
-
- subdir-y may be used to specify a subdirectory to be exported.
-
- Example:
- #arch/cris/include/uapi/asm/Kbuild
- subdir-y += ../arch-v10/arch/
- subdir-y += ../arch-v32/arch/
-
- The convention is to list one subdir per line and
- preferably in alphabetic order.
-
=== 8 Kbuild Variables
The top Makefile exports the following variables:
diff --git a/Makefile b/Makefile
index 165cf9783a5d..954b20072c42 100644
--- a/Makefile
+++ b/Makefile
@@ -1128,7 +1128,7 @@ firmware_install:
export INSTALL_HDR_PATH = $(objtree)/usr
# If we do an all arch process set dst to asm-$(hdr-arch)
-hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(hdr-arch), dst=include)
PHONY += archheaders
archheaders:
@@ -1149,7 +1149,7 @@ headers_install: __headers
$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
$(error Headers not exportable for the $(SRCARCH) architecture))
$(Q)$(MAKE) $(hdr-inst)=include/uapi
- $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst)
PHONY += headers_check_all
headers_check_all: headers_install_all
@@ -1158,7 +1158,7 @@ headers_check_all: headers_install_all
PHONY += headers_check
headers_check: headers_install
$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
- $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/ $(hdr-dst) HDRCHECK=1
# ---------------------------------------------------------------------------
# Kernel selftest
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
index d0c5471856e0..b15bf6bc0e94 100644
--- a/arch/cris/include/uapi/asm/Kbuild
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -1,5 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-subdir-y += ../arch-v10/arch/
-subdir-y += ../arch-v32/arch/
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index e0a50111e07f..0c74c3c5ebfa 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -2,5 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += ucontext.h
-
-subdir-y += ../arch
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 6e56155579d8..3d692b650687 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -2,7 +2,7 @@
# Installing headers
#
# All headers under include/uapi, include/generated/uapi,
-# arch/<arch>/include/uapi/asm and arch/<arch>/include/generated/uapi/asm are
+# arch/<arch>/include/uapi and arch/<arch>/include/generated/uapi are
# exported.
# They are preprocessed to remove __KERNEL__ section of the file.
#
@@ -30,7 +30,6 @@ installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
-subdirs += $(subdir-y)
header-files := $(notdir $(wildcard $(srcdir)/*.h))
header-files += $(notdir $(wildcard $(srcdir)/*.agh))
header-files := $(filter-out $(header-n), $(header-files))
--
2.8.1
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.
In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.
After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-avr32/kvm_para.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/crypto.h
linux/cryptouser.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/userio.h
linux/virtio_mmio.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h
Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).
Thanks to Julien Floret <[email protected]> for the tip to get all
subdirs with a pure makefile command.
For the record, note that exported files for asm directories are a mix of
files listed by:
- include/uapi/asm-generic/Kbuild.asm;
- arch/<arch>/include/uapi/asm/Kbuild;
- arch/<arch>/include/asm/Kbuild.
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Acked-by: Russell King <[email protected]>
Acked-by: Mark Salter <[email protected]>
Acked-by: Michael Ellerman <[email protected]> (powerpc)
---
Documentation/kbuild/makefiles.txt | 66 ++--
arch/alpha/include/uapi/asm/Kbuild | 41 ---
arch/arc/include/uapi/asm/Kbuild | 3 -
arch/arm/include/uapi/asm/Kbuild | 17 -
arch/arm64/include/uapi/asm/Kbuild | 18 -
arch/avr32/include/uapi/asm/Kbuild | 20 --
arch/blackfin/include/uapi/asm/Kbuild | 17 -
arch/c6x/include/uapi/asm/Kbuild | 8 -
arch/cris/include/uapi/arch-v10/arch/Kbuild | 5 -
arch/cris/include/uapi/arch-v32/arch/Kbuild | 3 -
arch/cris/include/uapi/asm/Kbuild | 43 +--
arch/frv/include/uapi/asm/Kbuild | 33 --
arch/h8300/include/uapi/asm/Kbuild | 28 --
arch/hexagon/include/asm/Kbuild | 3 -
arch/hexagon/include/uapi/asm/Kbuild | 13 -
arch/ia64/include/uapi/asm/Kbuild | 45 ---
arch/m32r/include/uapi/asm/Kbuild | 31 --
arch/m68k/include/uapi/asm/Kbuild | 24 --
arch/metag/include/uapi/asm/Kbuild | 8 -
arch/microblaze/include/uapi/asm/Kbuild | 32 --
arch/mips/include/uapi/asm/Kbuild | 37 ---
arch/mn10300/include/uapi/asm/Kbuild | 32 --
arch/nios2/include/uapi/asm/Kbuild | 3 +-
arch/openrisc/include/asm/Kbuild | 3 -
arch/openrisc/include/uapi/asm/Kbuild | 8 -
arch/parisc/include/uapi/asm/Kbuild | 28 --
arch/powerpc/include/uapi/asm/Kbuild | 45 ---
arch/s390/include/uapi/asm/Kbuild | 53 ---
arch/score/include/asm/Kbuild | 3 -
arch/score/include/uapi/asm/Kbuild | 32 --
arch/sh/include/uapi/asm/Kbuild | 23 --
arch/sparc/include/uapi/asm/Kbuild | 48 ---
arch/tile/include/asm/Kbuild | 3 -
arch/tile/include/uapi/arch/Kbuild | 17 -
arch/tile/include/uapi/asm/Kbuild | 19 +-
arch/unicore32/include/uapi/asm/Kbuild | 6 -
arch/x86/include/uapi/asm/Kbuild | 58 ----
arch/xtensa/include/uapi/asm/Kbuild | 23 --
include/Kbuild | 2 -
include/asm-generic/Kbuild.asm | 1 -
include/scsi/fc/Kbuild | 0
include/uapi/Kbuild | 15 -
include/uapi/asm-generic/Kbuild | 36 --
include/uapi/asm-generic/Kbuild.asm | 62 ++--
include/uapi/drm/Kbuild | 23 --
include/uapi/linux/Kbuild | 494 +---------------------------
include/uapi/linux/android/Kbuild | 2 -
include/uapi/linux/byteorder/Kbuild | 3 -
include/uapi/linux/caif/Kbuild | 3 -
include/uapi/linux/can/Kbuild | 6 -
include/uapi/linux/dvb/Kbuild | 9 -
include/uapi/linux/hdlc/Kbuild | 2 -
include/uapi/linux/hsi/Kbuild | 2 -
include/uapi/linux/iio/Kbuild | 3 -
include/uapi/linux/isdn/Kbuild | 2 -
include/uapi/linux/mmc/Kbuild | 2 -
include/uapi/linux/netfilter/Kbuild | 89 -----
include/uapi/linux/netfilter/ipset/Kbuild | 5 -
include/uapi/linux/netfilter_arp/Kbuild | 3 -
include/uapi/linux/netfilter_bridge/Kbuild | 18 -
include/uapi/linux/netfilter_ipv4/Kbuild | 10 -
include/uapi/linux/netfilter_ipv6/Kbuild | 13 -
include/uapi/linux/nfsd/Kbuild | 6 -
include/uapi/linux/raid/Kbuild | 3 -
include/uapi/linux/spi/Kbuild | 2 -
include/uapi/linux/sunrpc/Kbuild | 2 -
include/uapi/linux/tc_act/Kbuild | 16 -
include/uapi/linux/tc_ematch/Kbuild | 5 -
include/uapi/linux/usb/Kbuild | 12 -
include/uapi/linux/wimax/Kbuild | 2 -
include/uapi/misc/Kbuild | 2 -
include/uapi/mtd/Kbuild | 6 -
include/uapi/rdma/Kbuild | 20 --
include/uapi/rdma/hfi/Kbuild | 3 -
include/uapi/scsi/Kbuild | 6 -
include/uapi/scsi/fc/Kbuild | 5 -
include/uapi/sound/Kbuild | 16 -
include/uapi/video/Kbuild | 4 -
include/uapi/xen/Kbuild | 5 -
include/video/Kbuild | 0
scripts/Makefile.headersinst | 55 ++--
81 files changed, 115 insertions(+), 1759 deletions(-)
delete mode 100644 arch/cris/include/uapi/arch-v10/arch/Kbuild
delete mode 100644 arch/cris/include/uapi/arch-v32/arch/Kbuild
delete mode 100644 arch/tile/include/uapi/arch/Kbuild
delete mode 100644 include/Kbuild
delete mode 100644 include/asm-generic/Kbuild.asm
delete mode 100644 include/scsi/fc/Kbuild
delete mode 100644 include/uapi/Kbuild
delete mode 100644 include/uapi/asm-generic/Kbuild
delete mode 100644 include/uapi/drm/Kbuild
delete mode 100644 include/uapi/linux/android/Kbuild
delete mode 100644 include/uapi/linux/byteorder/Kbuild
delete mode 100644 include/uapi/linux/caif/Kbuild
delete mode 100644 include/uapi/linux/can/Kbuild
delete mode 100644 include/uapi/linux/dvb/Kbuild
delete mode 100644 include/uapi/linux/hdlc/Kbuild
delete mode 100644 include/uapi/linux/hsi/Kbuild
delete mode 100644 include/uapi/linux/iio/Kbuild
delete mode 100644 include/uapi/linux/isdn/Kbuild
delete mode 100644 include/uapi/linux/mmc/Kbuild
delete mode 100644 include/uapi/linux/netfilter/Kbuild
delete mode 100644 include/uapi/linux/netfilter/ipset/Kbuild
delete mode 100644 include/uapi/linux/netfilter_arp/Kbuild
delete mode 100644 include/uapi/linux/netfilter_bridge/Kbuild
delete mode 100644 include/uapi/linux/netfilter_ipv4/Kbuild
delete mode 100644 include/uapi/linux/netfilter_ipv6/Kbuild
delete mode 100644 include/uapi/linux/nfsd/Kbuild
delete mode 100644 include/uapi/linux/raid/Kbuild
delete mode 100644 include/uapi/linux/spi/Kbuild
delete mode 100644 include/uapi/linux/sunrpc/Kbuild
delete mode 100644 include/uapi/linux/tc_act/Kbuild
delete mode 100644 include/uapi/linux/tc_ematch/Kbuild
delete mode 100644 include/uapi/linux/usb/Kbuild
delete mode 100644 include/uapi/linux/wimax/Kbuild
delete mode 100644 include/uapi/misc/Kbuild
delete mode 100644 include/uapi/mtd/Kbuild
delete mode 100644 include/uapi/rdma/Kbuild
delete mode 100644 include/uapi/rdma/hfi/Kbuild
delete mode 100644 include/uapi/scsi/Kbuild
delete mode 100644 include/uapi/scsi/fc/Kbuild
delete mode 100644 include/uapi/sound/Kbuild
delete mode 100644 include/uapi/video/Kbuild
delete mode 100644 include/uapi/xen/Kbuild
delete mode 100644 include/video/Kbuild
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 37b525d329ae..91ffb391ed54 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -44,10 +44,12 @@ This document describes the Linux kernel Makefiles.
--- 6.11 Post-link pass
=== 7 Kbuild syntax for exported headers
- --- 7.1 header-y
+ --- 7.1 header-n
--- 7.2 genhdr-y
--- 7.3 generic-y
--- 7.4 generated-y
+ --- 7.5 mandatory-y
+ --- 7.6 subdir-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1235,7 +1237,7 @@ When kbuild executes, the following steps are followed (roughly):
that may be shared between individual architectures.
The recommended approach how to use a generic header file is
to list the file in the Kbuild file.
- See "7.4 generic-y" for further info on syntax etc.
+ See "7.3 generic-y" for further info on syntax etc.
--- 6.11 Post-link pass
@@ -1262,37 +1264,30 @@ The pre-processing does:
- drop include of compiler.h
- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
-Each relevant directory contains a file name "Kbuild" which specifies the
-headers to be exported.
-See subsequent chapter for the syntax of the Kbuild file.
-
- --- 7.1 header-y
-
- header-y specifies header files to be exported.
-
- Example:
- #include/linux/Kbuild
- header-y += usb/
- header-y += aio_abi.h
+All headers under include/uapi/, include/generated/uapi/,
+arch/<arch>/include/uapi/asm/ and arch/<arch>/include/generated/uapi/asm/
+are exported.
- The convention is to list one file per line and
- preferably in alphabetic order.
+A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
+arch/<arch>/include/asm/ to list asm files coming from asm-generic.
+See subsequent chapter for the syntax of the Kbuild file.
- header-y also specifies which subdirectories to visit.
- A subdirectory is identified by a trailing '/' which
- can be seen in the example above for the usb subdirectory.
+ --- 7.1 header-n
- Subdirectories are visited before their parent directories.
+ header-n is essentially used by include/uapi/linux/Kbuild to avoid
+ exporting specific headers (e.g. kvm.h) on architectures that do not
+ support it. It should be avoided as much as possible.
--- 7.2 genhdr-y
- genhdr-y specifies generated files to be exported.
- Generated files are special as they need to be looked
- up in another directory when doing 'make O=...' builds.
+ genhdr-y specifies asm files to be generated.
Example:
- #include/linux/Kbuild
- genhdr-y += version.h
+ #arch/x86/include/uapi/asm/Kbuild
+ genhdr-y += unistd_32.h
+ genhdr-y += unistd_64.h
+ genhdr-y += unistd_x32.h
+
--- 7.3 generic-y
@@ -1334,6 +1329,27 @@ See subsequent chapter for the syntax of the Kbuild file.
#arch/x86/include/asm/Kbuild
generated-y += syscalls_32.h
+ --- 7.5 mandatory-y
+
+ mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm
+ to define the minimun set of headers that must be exported in
+ include/asm.
+
+ The convention is to list one subdir per line and
+ preferably in alphabetic order.
+
+ --- 7.6 subdir-y
+
+ subdir-y may be used to specify a subdirectory to be exported.
+
+ Example:
+ #arch/cris/include/uapi/asm/Kbuild
+ subdir-y += ../arch-v10/arch/
+ subdir-y += ../arch-v32/arch/
+
+ The convention is to list one subdir per line and
+ preferably in alphabetic order.
+
=== 8 Kbuild Variables
The top Makefile exports the following variables:
diff --git a/arch/alpha/include/uapi/asm/Kbuild b/arch/alpha/include/uapi/asm/Kbuild
index d96f2ef5b639..b15bf6bc0e94 100644
--- a/arch/alpha/include/uapi/asm/Kbuild
+++ b/arch/alpha/include/uapi/asm/Kbuild
@@ -1,43 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += a.out.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += compiler.h
-header-y += console.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += fpu.h
-header-y += gentrap.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += pal.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += reg.h
-header-y += regdef.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sysinfo.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
index f50d02df78d5..b15bf6bc0e94 100644
--- a/arch/arc/include/uapi/asm/Kbuild
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -1,5 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += elf.h
-header-y += page.h
-header-y += cachectl.h
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 46a76cd6acb6..607f702c2d62 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -1,23 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += fcntl.h
-header-y += hwcap.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += perf_regs.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += unistd.h
genhdr-y += unistd-common.h
genhdr-y += unistd-oabi.h
genhdr-y += unistd-eabi.h
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
index 825b0fe51c2b..13a97aa2285f 100644
--- a/arch/arm64/include/uapi/asm/Kbuild
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -2,21 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += fcntl.h
-header-y += hwcap.h
-header-y += kvm_para.h
-header-y += perf_regs.h
-header-y += param.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += statfs.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild
index 08d8a3d76ea8..610395083364 100644
--- a/arch/avr32/include/uapi/asm/Kbuild
+++ b/arch/avr32/include/uapi/asm/Kbuild
@@ -1,26 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
generic-y += bitsperlong.h
generic-y += errno.h
generic-y += fcntl.h
diff --git a/arch/blackfin/include/uapi/asm/Kbuild b/arch/blackfin/include/uapi/asm/Kbuild
index 0bd28f77abc3..b15bf6bc0e94 100644
--- a/arch/blackfin/include/uapi/asm/Kbuild
+++ b/arch/blackfin/include/uapi/asm/Kbuild
@@ -1,19 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += bfin_sport.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += fcntl.h
-header-y += fixed_code.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
index e9bc2b2b8147..13a97aa2285f 100644
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -2,11 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/cris/include/uapi/arch-v10/arch/Kbuild b/arch/cris/include/uapi/arch-v10/arch/Kbuild
deleted file mode 100644
index 9048c87a782b..000000000000
--- a/arch/cris/include/uapi/arch-v10/arch/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += sv_addr.agh
-header-y += sv_addr_ag.h
-header-y += svinto.h
-header-y += user.h
diff --git a/arch/cris/include/uapi/arch-v32/arch/Kbuild b/arch/cris/include/uapi/arch-v32/arch/Kbuild
deleted file mode 100644
index 59efffd16b61..000000000000
--- a/arch/cris/include/uapi/arch-v32/arch/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += cryptocop.h
-header-y += user.h
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
index d5564a0ae66a..d0c5471856e0 100644
--- a/arch/cris/include/uapi/asm/Kbuild
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -1,44 +1,5 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += ../arch-v10/arch/
-header-y += ../arch-v32/arch/
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += elf.h
-header-y += elf_v10.h
-header-y += elf_v32.h
-header-y += errno.h
-header-y += ethernet.h
-header-y += etraxgpio.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += ptrace_v10.h
-header-y += ptrace_v32.h
-header-y += resource.h
-header-y += rs485.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sync_serial.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+subdir-y += ../arch-v10/arch/
+subdir-y += ../arch-v32/arch/
diff --git a/arch/frv/include/uapi/asm/Kbuild b/arch/frv/include/uapi/asm/Kbuild
index 42a2b33461c0..b15bf6bc0e94 100644
--- a/arch/frv/include/uapi/asm/Kbuild
+++ b/arch/frv/include/uapi/asm/Kbuild
@@ -1,35 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += registers.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
index fb6101a5d4f1..b15bf6bc0e94 100644
--- a/arch/h8300/include/uapi/asm/Kbuild
+++ b/arch/h8300/include/uapi/asm/Kbuild
@@ -1,30 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += siginfo.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index 797b64a4b80b..65f48073f8ac 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ucontext.h
-
generic-y += auxvec.h
generic-y += barrier.h
generic-y += bug.h
diff --git a/arch/hexagon/include/uapi/asm/Kbuild b/arch/hexagon/include/uapi/asm/Kbuild
index c31706c38631..b15bf6bc0e94 100644
--- a/arch/hexagon/include/uapi/asm/Kbuild
+++ b/arch/hexagon/include/uapi/asm/Kbuild
@@ -1,15 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += param.h
-header-y += ptrace.h
-header-y += registers.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += swab.h
-header-y += unistd.h
-header-y += user.h
diff --git a/arch/ia64/include/uapi/asm/Kbuild b/arch/ia64/include/uapi/asm/Kbuild
index 891002bbb995..13a97aa2285f 100644
--- a/arch/ia64/include/uapi/asm/Kbuild
+++ b/arch/ia64/include/uapi/asm/Kbuild
@@ -2,48 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += break.h
-header-y += byteorder.h
-header-y += cmpxchg.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += fpu.h
-header-y += gcc_intrin.h
-header-y += ia64regs.h
-header-y += intel_intrin.h
-header-y += intrinsics.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += perfmon.h
-header-y += perfmon_default_smpl.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += ptrace_offsets.h
-header-y += resource.h
-header-y += rse.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += ustack.h
diff --git a/arch/m32r/include/uapi/asm/Kbuild b/arch/m32r/include/uapi/asm/Kbuild
index 43937a61d6cf..b15bf6bc0e94 100644
--- a/arch/m32r/include/uapi/asm/Kbuild
+++ b/arch/m32r/include/uapi/asm/Kbuild
@@ -1,33 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild
index 6a2d257bdfb2..64368077235a 100644
--- a/arch/m68k/include/uapi/asm/Kbuild
+++ b/arch/m68k/include/uapi/asm/Kbuild
@@ -9,27 +9,3 @@ generic-y += socket.h
generic-y += sockios.h
generic-y += termbits.h
generic-y += termios.h
-
-header-y += a.out.h
-header-y += bootinfo.h
-header-y += bootinfo-amiga.h
-header-y += bootinfo-apollo.h
-header-y += bootinfo-atari.h
-header-y += bootinfo-hp300.h
-header-y += bootinfo-mac.h
-header-y += bootinfo-q40.h
-header-y += bootinfo-vme.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += fcntl.h
-header-y += ioctls.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/metag/include/uapi/asm/Kbuild b/arch/metag/include/uapi/asm/Kbuild
index ab78be2b6eb0..b29731ebd7a9 100644
--- a/arch/metag/include/uapi/asm/Kbuild
+++ b/arch/metag/include/uapi/asm/Kbuild
@@ -1,14 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += byteorder.h
-header-y += ech.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += swab.h
-header-y += unistd.h
-
generic-y += mman.h
generic-y += resource.h
generic-y += setup.h
diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild
index 1aac99f87df1..2178c78c7c1a 100644
--- a/arch/microblaze/include/uapi/asm/Kbuild
+++ b/arch/microblaze/include/uapi/asm/Kbuild
@@ -2,35 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += types.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += elf.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += unistd.h
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
index f2cf41461146..a0266feba9e6 100644
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -2,40 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += ipcbuf.h
-
-header-y += auxvec.h
-header-y += bitfield.h
-header-y += bitsperlong.h
-header-y += break.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += inst.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += sgidefs.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sysmips.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/mn10300/include/uapi/asm/Kbuild b/arch/mn10300/include/uapi/asm/Kbuild
index 040178cdb3eb..b15bf6bc0e94 100644
--- a/arch/mn10300/include/uapi/asm/Kbuild
+++ b/arch/mn10300/include/uapi/asm/Kbuild
@@ -1,34 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
index 69c965304146..374bd123329f 100644
--- a/arch/nios2/include/uapi/asm/Kbuild
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -1,6 +1,5 @@
+# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += elf.h
-
generic-y += setup.h
generic-y += ucontext.h
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index fb01873a5aad..1b533a107f19 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ucontext.h
-
generic-y += auxvec.h
generic-y += barrier.h
generic-y += bitsperlong.h
diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild
index 80761eb82b5f..b15bf6bc0e94 100644
--- a/arch/openrisc/include/uapi/asm/Kbuild
+++ b/arch/openrisc/include/uapi/asm/Kbuild
@@ -1,10 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += byteorder.h
-header-y += elf.h
-header-y += kvm_para.h
-header-y += param.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += unistd.h
diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild
index 348356c99514..3971c60a7e7f 100644
--- a/arch/parisc/include/uapi/asm/Kbuild
+++ b/arch/parisc/include/uapi/asm/Kbuild
@@ -2,31 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += resource.h
-
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += pdc.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index dab3717e3ea0..b15bf6bc0e94 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -1,47 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += bootx.h
-header-y += byteorder.h
-header-y += cputable.h
-header-y += eeh.h
-header-y += elf.h
-header-y += epapr_hcalls.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += nvram.h
-header-y += opal-prd.h
-header-y += param.h
-header-y += perf_event.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ps3fb.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += spu_info.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += tm.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild
index 6848ba5c1454..b15bf6bc0e94 100644
--- a/arch/s390/include/uapi/asm/Kbuild
+++ b/arch/s390/include/uapi/asm/Kbuild
@@ -1,55 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += chpid.h
-header-y += chsc.h
-header-y += clp.h
-header-y += cmb.h
-header-y += dasd.h
-header-y += debug.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += hypfs.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += kvm_perf.h
-header-y += kvm_virtio.h
-header-y += mman.h
-header-y += monwriter.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += pkey.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += qeth.h
-header-y += resource.h
-header-y += schid.h
-header-y += sclp_ctl.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sie.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += tape390.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += virtio-ccw.h
-header-y += vtoc.h
-header-y += zcrypt.h
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
index 926943a49ea5..4ee7fc77d23c 100644
--- a/arch/score/include/asm/Kbuild
+++ b/arch/score/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y +=
-
generic-y += barrier.h
generic-y += clkdev.h
generic-y += current.h
diff --git a/arch/score/include/uapi/asm/Kbuild b/arch/score/include/uapi/asm/Kbuild
index 040178cdb3eb..b15bf6bc0e94 100644
--- a/arch/score/include/uapi/asm/Kbuild
+++ b/arch/score/include/uapi/asm/Kbuild
@@ -1,34 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
index 60613ae78513..b15bf6bc0e94 100644
--- a/arch/sh/include/uapi/asm/Kbuild
+++ b/arch/sh/include/uapi/asm/Kbuild
@@ -1,25 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += cpu-features.h
-header-y += hw_breakpoint.h
-header-y += ioctls.h
-header-y += posix_types.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += ptrace.h
-header-y += ptrace_32.h
-header-y += ptrace_64.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += types.h
-header-y += unistd.h
-header-y += unistd_32.h
-header-y += unistd_64.h
diff --git a/arch/sparc/include/uapi/asm/Kbuild b/arch/sparc/include/uapi/asm/Kbuild
index b5843ee09fb5..b15bf6bc0e94 100644
--- a/arch/sparc/include/uapi/asm/Kbuild
+++ b/arch/sparc/include/uapi/asm/Kbuild
@@ -1,50 +1,2 @@
# UAPI Header export list
-# User exported sparc header files
-
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += apc.h
-header-y += asi.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += display7seg.h
-header-y += envctrl.h
-header-y += errno.h
-header-y += fbio.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += jsflash.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += openpromio.h
-header-y += param.h
-header-y += perfctr.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += psr.h
-header-y += psrcompat.h
-header-y += pstate.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += traps.h
-header-y += uctx.h
-header-y += unistd.h
-header-y += utrap.h
-header-y += watchdog.h
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index aa48b6eaff2d..61157a7e8532 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ../arch/
-
generic-y += bug.h
generic-y += bugs.h
generic-y += clkdev.h
diff --git a/arch/tile/include/uapi/arch/Kbuild b/arch/tile/include/uapi/arch/Kbuild
deleted file mode 100644
index 97dfbecec6b6..000000000000
--- a/arch/tile/include/uapi/arch/Kbuild
+++ /dev/null
@@ -1,17 +0,0 @@
-# UAPI Header export list
-header-y += abi.h
-header-y += chip.h
-header-y += chip_tilegx.h
-header-y += chip_tilepro.h
-header-y += icache.h
-header-y += interrupts.h
-header-y += interrupts_32.h
-header-y += interrupts_64.h
-header-y += opcode.h
-header-y += opcode_tilegx.h
-header-y += opcode_tilepro.h
-header-y += sim.h
-header-y += sim_def.h
-header-y += spr_def.h
-header-y += spr_def_32.h
-header-y += spr_def_64.h
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index c20db8e428bf..e0a50111e07f 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -1,21 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += hardwall.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += ucontext.h
-header-y += unistd.h
-
generic-y += ucontext.h
+
+subdir-y += ../arch
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
index 0514d7ad6855..13a97aa2285f 100644
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ b/arch/unicore32/include/uapi/asm/Kbuild
@@ -1,10 +1,4 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += unistd.h
-
generic-y += kvm_para.h
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
index 1c532b3f18ea..83b6e9a0dce4 100644
--- a/arch/x86/include/uapi/asm/Kbuild
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -4,61 +4,3 @@ include include/uapi/asm-generic/Kbuild.asm
genhdr-y += unistd_32.h
genhdr-y += unistd_64.h
genhdr-y += unistd_x32.h
-header-y += a.out.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += boot.h
-header-y += bootparam.h
-header-y += byteorder.h
-header-y += debugreg.h
-header-y += e820.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += hw_breakpoint.h
-header-y += hyperv.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += ist.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += kvm_perf.h
-header-y += ldt.h
-header-y += mce.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += msr.h
-header-y += mtrr.h
-header-y += param.h
-header-y += perf_regs.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += posix_types_x32.h
-header-y += prctl.h
-header-y += processor-flags.h
-header-y += ptrace-abi.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += sigcontext32.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += svm.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += vm86.h
-header-y += vmx.h
-header-y += vsyscall.h
diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild
index 56aad54e7fb7..b15bf6bc0e94 100644
--- a/arch/xtensa/include/uapi/asm/Kbuild
+++ b/arch/xtensa/include/uapi/asm/Kbuild
@@ -1,25 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += termbits.h
-header-y += types.h
-header-y += unistd.h
diff --git a/include/Kbuild b/include/Kbuild
deleted file mode 100644
index bab1145bc7a7..000000000000
--- a/include/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# Top-level Makefile calls into asm-$(ARCH)
-# List only non-arch directories below
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
deleted file mode 100644
index d2ee86b4c091..000000000000
--- a/include/asm-generic/Kbuild.asm
+++ /dev/null
@@ -1 +0,0 @@
-include include/uapi/asm-generic/Kbuild.asm
diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/include/uapi/Kbuild b/include/uapi/Kbuild
deleted file mode 100644
index 245aa6e05e6a..000000000000
--- a/include/uapi/Kbuild
+++ /dev/null
@@ -1,15 +0,0 @@
-# UAPI Header export list
-# Top-level Makefile calls into asm-$(ARCH)
-# List only non-arch directories below
-
-
-header-y += asm-generic/
-header-y += linux/
-header-y += sound/
-header-y += mtd/
-header-y += rdma/
-header-y += video/
-header-y += drm/
-header-y += xen/
-header-y += scsi/
-header-y += misc/
diff --git a/include/uapi/asm-generic/Kbuild b/include/uapi/asm-generic/Kbuild
deleted file mode 100644
index b73de7bb7a62..000000000000
--- a/include/uapi/asm-generic/Kbuild
+++ /dev/null
@@ -1,36 +0,0 @@
-# UAPI Header export list
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += errno-base.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += int-l64.h
-header-y += int-ll64.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman-common.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += shmparam.h
-header-y += siginfo.h
-header-y += signal-defs.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/include/uapi/asm-generic/Kbuild.asm b/include/uapi/asm-generic/Kbuild.asm
index fcd50b759217..8e6b335664f2 100644
--- a/include/uapi/asm-generic/Kbuild.asm
+++ b/include/uapi/asm-generic/Kbuild.asm
@@ -8,38 +8,38 @@ opt-header += a.out.h
#
# Headers that are mandatory in usr/include/asm/
#
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+mandatory-y += auxvec.h
+mandatory-y += bitsperlong.h
+mandatory-y += byteorder.h
+mandatory-y += errno.h
+mandatory-y += fcntl.h
+mandatory-y += ioctl.h
+mandatory-y += ioctls.h
+mandatory-y += ipcbuf.h
+mandatory-y += mman.h
+mandatory-y += msgbuf.h
+mandatory-y += param.h
+mandatory-y += poll.h
+mandatory-y += posix_types.h
+mandatory-y += ptrace.h
+mandatory-y += resource.h
+mandatory-y += sembuf.h
+mandatory-y += setup.h
+mandatory-y += shmbuf.h
+mandatory-y += sigcontext.h
+mandatory-y += siginfo.h
+mandatory-y += signal.h
+mandatory-y += socket.h
+mandatory-y += sockios.h
+mandatory-y += stat.h
+mandatory-y += statfs.h
+mandatory-y += swab.h
+mandatory-y += termbits.h
+mandatory-y += termios.h
+mandatory-y += types.h
+mandatory-y += unistd.h
-header-y += $(foreach hdr,$(opt-header), \
+mandatory-y += $(foreach hdr,$(opt-header), \
$(if \
$(wildcard \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/$(hdr) \
diff --git a/include/uapi/drm/Kbuild b/include/uapi/drm/Kbuild
deleted file mode 100644
index c97addd08f8c..000000000000
--- a/include/uapi/drm/Kbuild
+++ /dev/null
@@ -1,23 +0,0 @@
-# UAPI Header export list
-header-y += drm.h
-header-y += drm_fourcc.h
-header-y += drm_mode.h
-header-y += drm_sarea.h
-header-y += amdgpu_drm.h
-header-y += exynos_drm.h
-header-y += i810_drm.h
-header-y += i915_drm.h
-header-y += mga_drm.h
-header-y += nouveau_drm.h
-header-y += omap_drm.h
-header-y += qxl_drm.h
-header-y += r128_drm.h
-header-y += radeon_drm.h
-header-y += savage_drm.h
-header-y += sis_drm.h
-header-y += tegra_drm.h
-header-y += via_drm.h
-header-y += vmwgfx_drm.h
-header-y += msm_drm.h
-header-y += vc4_drm.h
-header-y += virtgpu_drm.h
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index dd9820b1c779..456cbe8a2aad 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -1,492 +1,16 @@
# UAPI Header export list
-header-y += android/
-header-y += byteorder/
-header-y += can/
-header-y += caif/
-header-y += dvb/
-header-y += hdlc/
-header-y += hsi/
-header-y += iio/
-header-y += isdn/
-header-y += mmc/
-header-y += nfsd/
-header-y += raid/
-header-y += spi/
-header-y += sunrpc/
-header-y += tc_act/
-header-y += tc_ematch/
-header-y += netfilter/
-header-y += netfilter_arp/
-header-y += netfilter_bridge/
-header-y += netfilter_ipv4/
-header-y += netfilter_ipv6/
-header-y += usb/
-header-y += wimax/
-genhdr-y += version.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
-header-y += a.out.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
+header-n += a.out.h
endif
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += am437x-vpfe.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atm_eni.h
-header-y += atm.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atm_nicstar.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += audit.h
-header-y += auto_fs4.h
-header-y += auto_fs.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += batman_adv.h
-header-y += baycom.h
-header-y += bcm933xx_hcs.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += blkzoned.h
-header-y += bpf_common.h
-header-y += bpf_perf_event.h
-header-y += bpf.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += bt-bmc.h
-header-y += btrfs.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cec.h
-header-y += cec-funcs.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += devlink.h
-header-y += dlmconstants.h
-header-y += dlm_device.h
-header-y += dlm.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dma-buf.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elfcore.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fou.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += genetlink.h
-header-y += gen_stats.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += gpio.h
-header-y += gsmmux.h
-header-y += gtp.h
-header-y += hdlcdrv.h
-header-y += hdlc.h
-header-y += hdreg.h
-header-y += hiddev.h
-header-y += hid.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hsr_netlink.h
-header-y += hyperv.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_macsec.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += ife.h
-header-y += igmp.h
-header-y += ila.h
-header-y += in6.h
-header-y += inet_diag.h
-header-y += in.h
-header-y += inotify.h
-header-y += input.h
-header-y += input-event-codes.h
-header-y += in_route.h
-header-y += ioctl.h
-header-y += ip6_tunnel.h
-header-y += ipc.h
-header-y += ip.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ip_vs.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn_divertif.h
-header-y += isdn.h
-header-y += isdnif.h
-header-y += isdn_ppp.h
-header-y += iso_fs.h
-header-y += ivtvfb.h
-header-y += ivtv.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kcmp.h
-header-y += kdev_t.h
-header-y += kd.h
-header-y += kernelcapi.h
-header-y += kernel.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
-header-y += kvm.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
+header-n += kvm.h
endif
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
-header-y += kvm_para.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
+header-n += kvm_para.h
endif
-
-header-y += hw_breakpoint.h
-header-y += l2tp.h
-header-y += libc-compat.h
-header-y += lirc.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += lwtunnel.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += media-bus-format.h
-header-y += mei.h
-header-y += membarrier.h
-header-y += memfd.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mic_common.h
-header-y += mic_ioctl.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mpls.h
-header-y += mpls_iptunnel.h
-header-y += mqueue.h
-header-y += mroute6.h
-header-y += mroute.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += nbd.h
-header-y += ncp_fs.h
-header-y += ncp.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += ndctl.h
-header-y += neighbour.h
-header-y += netconf.h
-header-y += netdevice.h
-header-y += net_dropmon.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += net.h
-header-y += netlink_diag.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += net_namespace.h
-header-y += net_tstamp.h
-header-y += nfc.h
-header-y += psample.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfsacl.h
-header-y += nfs_fs.h
-header-y += nfs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nl80211.h
-header-y += n_r3964.h
-header-y += nubus.h
-header-y += nvme_ioctl.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += openvswitch.h
-header-y += packet_diag.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pktcdvd.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_acl.h
-header-y += posix_acl_xattr.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp_defs.h
-header-y += ppp-ioctl.h
-header-y += pps.h
-header-y += prctl.h
-header-y += psci.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += rio_cm_cdev.h
-header-y += rio_mport_cdev.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += scif_ioctl.h
-header-y += screen_info.h
-header-y += sctp.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += seg6_genl.h
-header-y += seg6.h
-header-y += seg6_hmac.h
-header-y += seg6_iptunnel.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial_core.h
-header-y += serial.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signalfd.h
-header-y += signal.h
-header-y += smiapp.h
-header-y += snmp.h
-header-y += sock_diag.h
-header-y += socket.h
-header-y += sockios.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += soundcard.h
-header-y += sound.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sync_file.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += target_core_user.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += thermal.h
-header-y += time.h
-header-y += timerfd.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc_config.h
-header-y += tipc_netlink.h
-header-y += tipc.h
-header-y += toshiba.h
-header-y += tty_flags.h
-header-y += tty.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += uleds.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += unix_diag.h
-header-y += usbdevice_fs.h
-header-y += usbip.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_gpu.h
-header-y += virtio_ids.h
-header-y += virtio_input.h
-header-y += virtio_mmio.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += virtio_scsi.h
-header-y += virtio_types.h
-header-y += virtio_vsock.h
-header-y += virtio_crypto.h
-header-y += vm_sockets.h
-header-y += vt.h
-header-y += vtpm_proxy.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
-header-y += xilinx-v4l2-controls.h
-header-y += zorro.h
-header-y += zorro_ids.h
-header-y += userfaultfd.h
diff --git a/include/uapi/linux/android/Kbuild b/include/uapi/linux/android/Kbuild
deleted file mode 100644
index ca011eec252a..000000000000
--- a/include/uapi/linux/android/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += binder.h
diff --git a/include/uapi/linux/byteorder/Kbuild b/include/uapi/linux/byteorder/Kbuild
deleted file mode 100644
index 619225b9ff2e..000000000000
--- a/include/uapi/linux/byteorder/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += big_endian.h
-header-y += little_endian.h
diff --git a/include/uapi/linux/caif/Kbuild b/include/uapi/linux/caif/Kbuild
deleted file mode 100644
index 43396612d3a3..000000000000
--- a/include/uapi/linux/caif/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += caif_socket.h
-header-y += if_caif.h
diff --git a/include/uapi/linux/can/Kbuild b/include/uapi/linux/can/Kbuild
deleted file mode 100644
index 21c91bf25a29..000000000000
--- a/include/uapi/linux/can/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += bcm.h
-header-y += error.h
-header-y += gw.h
-header-y += netlink.h
-header-y += raw.h
diff --git a/include/uapi/linux/dvb/Kbuild b/include/uapi/linux/dvb/Kbuild
deleted file mode 100644
index d40942cfc627..000000000000
--- a/include/uapi/linux/dvb/Kbuild
+++ /dev/null
@@ -1,9 +0,0 @@
-# UAPI Header export list
-header-y += audio.h
-header-y += ca.h
-header-y += dmx.h
-header-y += frontend.h
-header-y += net.h
-header-y += osd.h
-header-y += version.h
-header-y += video.h
diff --git a/include/uapi/linux/hdlc/Kbuild b/include/uapi/linux/hdlc/Kbuild
deleted file mode 100644
index 8c1d2cb75e33..000000000000
--- a/include/uapi/linux/hdlc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += ioctl.h
diff --git a/include/uapi/linux/hsi/Kbuild b/include/uapi/linux/hsi/Kbuild
deleted file mode 100644
index a16a00544258..000000000000
--- a/include/uapi/linux/hsi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += hsi_char.h cs-protocol.h
diff --git a/include/uapi/linux/iio/Kbuild b/include/uapi/linux/iio/Kbuild
deleted file mode 100644
index 86f76d84c44f..000000000000
--- a/include/uapi/linux/iio/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += events.h
-header-y += types.h
diff --git a/include/uapi/linux/isdn/Kbuild b/include/uapi/linux/isdn/Kbuild
deleted file mode 100644
index 89e52850bf29..000000000000
--- a/include/uapi/linux/isdn/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += capicmd.h
diff --git a/include/uapi/linux/mmc/Kbuild b/include/uapi/linux/mmc/Kbuild
deleted file mode 100644
index 8c1d2cb75e33..000000000000
--- a/include/uapi/linux/mmc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += ioctl.h
diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild
deleted file mode 100644
index 03f194aeadc5..000000000000
--- a/include/uapi/linux/netfilter/Kbuild
+++ /dev/null
@@ -1,89 +0,0 @@
-# UAPI Header export list
-header-y += ipset/
-header-y += nf_conntrack_common.h
-header-y += nf_conntrack_ftp.h
-header-y += nf_conntrack_sctp.h
-header-y += nf_conntrack_tcp.h
-header-y += nf_conntrack_tuple_common.h
-header-y += nf_log.h
-header-y += nf_tables.h
-header-y += nf_tables_compat.h
-header-y += nf_nat.h
-header-y += nfnetlink.h
-header-y += nfnetlink_acct.h
-header-y += nfnetlink_compat.h
-header-y += nfnetlink_conntrack.h
-header-y += nfnetlink_cthelper.h
-header-y += nfnetlink_cttimeout.h
-header-y += nfnetlink_log.h
-header-y += nfnetlink_queue.h
-header-y += x_tables.h
-header-y += xt_AUDIT.h
-header-y += xt_CHECKSUM.h
-header-y += xt_CLASSIFY.h
-header-y += xt_CONNMARK.h
-header-y += xt_CONNSECMARK.h
-header-y += xt_CT.h
-header-y += xt_DSCP.h
-header-y += xt_HMARK.h
-header-y += xt_IDLETIMER.h
-header-y += xt_LED.h
-header-y += xt_LOG.h
-header-y += xt_MARK.h
-header-y += xt_NFLOG.h
-header-y += xt_NFQUEUE.h
-header-y += xt_RATEEST.h
-header-y += xt_SECMARK.h
-header-y += xt_SYNPROXY.h
-header-y += xt_TCPMSS.h
-header-y += xt_TCPOPTSTRIP.h
-header-y += xt_TEE.h
-header-y += xt_TPROXY.h
-header-y += xt_addrtype.h
-header-y += xt_bpf.h
-header-y += xt_cgroup.h
-header-y += xt_cluster.h
-header-y += xt_comment.h
-header-y += xt_connbytes.h
-header-y += xt_connlabel.h
-header-y += xt_connlimit.h
-header-y += xt_connmark.h
-header-y += xt_conntrack.h
-header-y += xt_cpu.h
-header-y += xt_dccp.h
-header-y += xt_devgroup.h
-header-y += xt_dscp.h
-header-y += xt_ecn.h
-header-y += xt_esp.h
-header-y += xt_hashlimit.h
-header-y += xt_helper.h
-header-y += xt_ipcomp.h
-header-y += xt_iprange.h
-header-y += xt_ipvs.h
-header-y += xt_l2tp.h
-header-y += xt_length.h
-header-y += xt_limit.h
-header-y += xt_mac.h
-header-y += xt_mark.h
-header-y += xt_multiport.h
-header-y += xt_nfacct.h
-header-y += xt_osf.h
-header-y += xt_owner.h
-header-y += xt_physdev.h
-header-y += xt_pkttype.h
-header-y += xt_policy.h
-header-y += xt_quota.h
-header-y += xt_rateest.h
-header-y += xt_realm.h
-header-y += xt_recent.h
-header-y += xt_rpfilter.h
-header-y += xt_sctp.h
-header-y += xt_set.h
-header-y += xt_socket.h
-header-y += xt_state.h
-header-y += xt_statistic.h
-header-y += xt_string.h
-header-y += xt_tcpmss.h
-header-y += xt_tcpudp.h
-header-y += xt_time.h
-header-y += xt_u32.h
diff --git a/include/uapi/linux/netfilter/ipset/Kbuild b/include/uapi/linux/netfilter/ipset/Kbuild
deleted file mode 100644
index d2680423d9ab..000000000000
--- a/include/uapi/linux/netfilter/ipset/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += ip_set.h
-header-y += ip_set_bitmap.h
-header-y += ip_set_hash.h
-header-y += ip_set_list.h
diff --git a/include/uapi/linux/netfilter_arp/Kbuild b/include/uapi/linux/netfilter_arp/Kbuild
deleted file mode 100644
index 62d5637cc0ac..000000000000
--- a/include/uapi/linux/netfilter_arp/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += arp_tables.h
-header-y += arpt_mangle.h
diff --git a/include/uapi/linux/netfilter_bridge/Kbuild b/include/uapi/linux/netfilter_bridge/Kbuild
deleted file mode 100644
index 0fbad8ef96de..000000000000
--- a/include/uapi/linux/netfilter_bridge/Kbuild
+++ /dev/null
@@ -1,18 +0,0 @@
-# UAPI Header export list
-header-y += ebt_802_3.h
-header-y += ebt_among.h
-header-y += ebt_arp.h
-header-y += ebt_arpreply.h
-header-y += ebt_ip.h
-header-y += ebt_ip6.h
-header-y += ebt_limit.h
-header-y += ebt_log.h
-header-y += ebt_mark_m.h
-header-y += ebt_mark_t.h
-header-y += ebt_nat.h
-header-y += ebt_nflog.h
-header-y += ebt_pkttype.h
-header-y += ebt_redirect.h
-header-y += ebt_stp.h
-header-y += ebt_vlan.h
-header-y += ebtables.h
diff --git a/include/uapi/linux/netfilter_ipv4/Kbuild b/include/uapi/linux/netfilter_ipv4/Kbuild
deleted file mode 100644
index ecb291df390e..000000000000
--- a/include/uapi/linux/netfilter_ipv4/Kbuild
+++ /dev/null
@@ -1,10 +0,0 @@
-# UAPI Header export list
-header-y += ip_tables.h
-header-y += ipt_CLUSTERIP.h
-header-y += ipt_ECN.h
-header-y += ipt_LOG.h
-header-y += ipt_REJECT.h
-header-y += ipt_TTL.h
-header-y += ipt_ah.h
-header-y += ipt_ecn.h
-header-y += ipt_ttl.h
diff --git a/include/uapi/linux/netfilter_ipv6/Kbuild b/include/uapi/linux/netfilter_ipv6/Kbuild
deleted file mode 100644
index 75a668ca2353..000000000000
--- a/include/uapi/linux/netfilter_ipv6/Kbuild
+++ /dev/null
@@ -1,13 +0,0 @@
-# UAPI Header export list
-header-y += ip6_tables.h
-header-y += ip6t_HL.h
-header-y += ip6t_LOG.h
-header-y += ip6t_NPT.h
-header-y += ip6t_REJECT.h
-header-y += ip6t_ah.h
-header-y += ip6t_frag.h
-header-y += ip6t_hl.h
-header-y += ip6t_ipv6header.h
-header-y += ip6t_mh.h
-header-y += ip6t_opts.h
-header-y += ip6t_rt.h
diff --git a/include/uapi/linux/nfsd/Kbuild b/include/uapi/linux/nfsd/Kbuild
deleted file mode 100644
index c11bc404053c..000000000000
--- a/include/uapi/linux/nfsd/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += cld.h
-header-y += debug.h
-header-y += export.h
-header-y += nfsfh.h
-header-y += stats.h
diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild
deleted file mode 100644
index e2c3d25405d7..000000000000
--- a/include/uapi/linux/raid/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += md_p.h
-header-y += md_u.h
diff --git a/include/uapi/linux/spi/Kbuild b/include/uapi/linux/spi/Kbuild
deleted file mode 100644
index 0cc747eff165..000000000000
--- a/include/uapi/linux/spi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += spidev.h
diff --git a/include/uapi/linux/sunrpc/Kbuild b/include/uapi/linux/sunrpc/Kbuild
deleted file mode 100644
index 8e02e47c20fb..000000000000
--- a/include/uapi/linux/sunrpc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += debug.h
diff --git a/include/uapi/linux/tc_act/Kbuild b/include/uapi/linux/tc_act/Kbuild
deleted file mode 100644
index ba62ddf0e58a..000000000000
--- a/include/uapi/linux/tc_act/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-# UAPI Header export list
-header-y += tc_csum.h
-header-y += tc_defact.h
-header-y += tc_gact.h
-header-y += tc_ipt.h
-header-y += tc_mirred.h
-header-y += tc_sample.h
-header-y += tc_nat.h
-header-y += tc_pedit.h
-header-y += tc_skbedit.h
-header-y += tc_vlan.h
-header-y += tc_bpf.h
-header-y += tc_connmark.h
-header-y += tc_ife.h
-header-y += tc_tunnel_key.h
-header-y += tc_skbmod.h
diff --git a/include/uapi/linux/tc_ematch/Kbuild b/include/uapi/linux/tc_ematch/Kbuild
deleted file mode 100644
index 53fca3925535..000000000000
--- a/include/uapi/linux/tc_ematch/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += tc_em_cmp.h
-header-y += tc_em_meta.h
-header-y += tc_em_nbyte.h
-header-y += tc_em_text.h
diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild
deleted file mode 100644
index 4cc4d6e7e523..000000000000
--- a/include/uapi/linux/usb/Kbuild
+++ /dev/null
@@ -1,12 +0,0 @@
-# UAPI Header export list
-header-y += audio.h
-header-y += cdc.h
-header-y += cdc-wdm.h
-header-y += ch11.h
-header-y += ch9.h
-header-y += functionfs.h
-header-y += g_printer.h
-header-y += gadgetfs.h
-header-y += midi.h
-header-y += tmc.h
-header-y += video.h
diff --git a/include/uapi/linux/wimax/Kbuild b/include/uapi/linux/wimax/Kbuild
deleted file mode 100644
index 1c97be49971f..000000000000
--- a/include/uapi/linux/wimax/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += i2400m.h
diff --git a/include/uapi/misc/Kbuild b/include/uapi/misc/Kbuild
deleted file mode 100644
index e96cae7d58c9..000000000000
--- a/include/uapi/misc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# misc Header export list
-header-y += cxl.h
diff --git a/include/uapi/mtd/Kbuild b/include/uapi/mtd/Kbuild
deleted file mode 100644
index 5a691e10cd0e..000000000000
--- a/include/uapi/mtd/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += inftl-user.h
-header-y += mtd-abi.h
-header-y += mtd-user.h
-header-y += nftl-user.h
-header-y += ubi-user.h
diff --git a/include/uapi/rdma/Kbuild b/include/uapi/rdma/Kbuild
deleted file mode 100644
index 1e0af1ff75c3..000000000000
--- a/include/uapi/rdma/Kbuild
+++ /dev/null
@@ -1,20 +0,0 @@
-# UAPI Header export list
-header-y += ib_user_cm.h
-header-y += rdma_user_ioctl.h
-header-y += ib_user_mad.h
-header-y += ib_user_sa.h
-header-y += ib_user_verbs.h
-header-y += rdma_netlink.h
-header-y += rdma_user_cm.h
-header-y += hfi/
-header-y += rdma_user_rxe.h
-header-y += cxgb3-abi.h
-header-y += cxgb4-abi.h
-header-y += mlx4-abi.h
-header-y += mlx5-abi.h
-header-y += mthca-abi.h
-header-y += nes-abi.h
-header-y += ocrdma-abi.h
-header-y += hns-abi.h
-header-y += vmw_pvrdma-abi.h
-header-y += qedr-abi.h
diff --git a/include/uapi/rdma/hfi/Kbuild b/include/uapi/rdma/hfi/Kbuild
deleted file mode 100644
index b65b0b3a5f63..000000000000
--- a/include/uapi/rdma/hfi/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += hfi1_user.h
-header-y += hfi1_ioctl.h
diff --git a/include/uapi/scsi/Kbuild b/include/uapi/scsi/Kbuild
deleted file mode 100644
index d791e0ad509d..000000000000
--- a/include/uapi/scsi/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += fc/
-header-y += scsi_bsg_fc.h
-header-y += scsi_netlink.h
-header-y += scsi_netlink_fc.h
-header-y += cxlflash_ioctl.h
diff --git a/include/uapi/scsi/fc/Kbuild b/include/uapi/scsi/fc/Kbuild
deleted file mode 100644
index 5ead9fac265c..000000000000
--- a/include/uapi/scsi/fc/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += fc_els.h
-header-y += fc_fs.h
-header-y += fc_gs.h
-header-y += fc_ns.h
diff --git a/include/uapi/sound/Kbuild b/include/uapi/sound/Kbuild
deleted file mode 100644
index 9578d8bdbf31..000000000000
--- a/include/uapi/sound/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-# UAPI Header export list
-header-y += asequencer.h
-header-y += asoc.h
-header-y += asound.h
-header-y += asound_fm.h
-header-y += compress_offload.h
-header-y += compress_params.h
-header-y += emu10k1.h
-header-y += firewire.h
-header-y += hdsp.h
-header-y += hdspm.h
-header-y += sb16_csp.h
-header-y += sfnt_info.h
-header-y += tlv.h
-header-y += usb_stream.h
-header-y += snd_sst_tokens.h
diff --git a/include/uapi/video/Kbuild b/include/uapi/video/Kbuild
deleted file mode 100644
index ac7203bb32cc..000000000000
--- a/include/uapi/video/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-# UAPI Header export list
-header-y += edid.h
-header-y += sisfb.h
-header-y += uvesafb.h
diff --git a/include/uapi/xen/Kbuild b/include/uapi/xen/Kbuild
deleted file mode 100644
index 5c459628e8c7..000000000000
--- a/include/uapi/xen/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += evtchn.h
-header-y += gntalloc.h
-header-y += gntdev.h
-header-y += privcmd.h
diff --git a/include/video/Kbuild b/include/video/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index ca5d439c9abf..6e56155579d8 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -1,17 +1,19 @@
# ==========================================================================
# Installing headers
#
-# header-y - list files to be installed. They are preprocessed
-# to remove __KERNEL__ section of the file
-# genhdr-y - Same as header-y but in a generated/ directory
+# All headers under include/uapi, include/generated/uapi,
+# arch/<arch>/include/uapi/asm and arch/<arch>/include/generated/uapi/asm are
+# exported.
+# They are preprocessed to remove __KERNEL__ section of the file.
#
# ==========================================================================
# generated header directory
gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
+# Kbuild file is optional
kbuild-file := $(srctree)/$(obj)/Kbuild
-include $(kbuild-file)
+-include $(kbuild-file)
# called may set destination dir (when installing to asm/)
_dst := $(if $(dst),$(dst),$(obj))
@@ -25,9 +27,15 @@ include scripts/Kbuild.include
installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
-header-y := $(sort $(header-y))
-subdirs := $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y := $(filter-out %/, $(header-y))
+srcdir := $(srctree)/$(obj)
+gendir := $(objtree)/$(gen)
+subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
+subdirs += $(subdir-y)
+header-files := $(notdir $(wildcard $(srcdir)/*.h))
+header-files += $(notdir $(wildcard $(srcdir)/*.agh))
+header-files := $(filter-out $(header-n), $(header-files))
+genhdr-files := $(notdir $(wildcard $(gendir)/*.h))
+genhdr-files := $(filter-out $(header-files), $(genhdr-files))
# files used to track state of install/check
install-file := $(installdir)/.install
@@ -35,25 +43,20 @@ check-file := $(installdir)/.check
# generic-y list all files an architecture uses from asm-generic
# Use this to build a list of headers which require a wrapper
-wrapper-files := $(filter $(header-y), $(generic-y))
-
-srcdir := $(srctree)/$(obj)
-gendir := $(objtree)/$(gen)
+generic-files := $(notdir $(wildcard $(srctree)/include/uapi/asm-generic/*.h))
+wrapper-files := $(filter $(generic-files), $(generic-y))
+wrapper-files := $(filter-out $(header-files), $(wrapper-files))
# all headers files for this dir
-header-y := $(filter-out $(generic-y), $(header-y))
-all-files := $(header-y) $(genhdr-y) $(wrapper-files)
+all-files := $(header-files) $(genhdr-files) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))
-# Check that all expected files exist
-$(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)),, \
- $(error Missing UAPI file $(srcdir)/$(hdr)) \
- ))
-$(foreach hdr, $(genhdr-y), \
- $(if $(wildcard $(gendir)/$(hdr)),, \
- $(error Missing generated UAPI file $(gendir)/$(hdr)) \
- ))
+ifneq ($(mandatory-y),)
+missing := $(filter-out $(all-files),$(mandatory-y))
+ifneq ($(missing),)
+$(error Some mandatory headers ($(missing)) are missing in $(obj))
+endif
+endif
# Work out what needs to be removed
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
@@ -67,8 +70,8 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-y); \
- $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-y); \
+ $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-files); \
+ $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-files); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
@@ -95,8 +98,8 @@ __headersinst: $(subdirs) $(install-file)
targets += $(install-file)
$(install-file): scripts/headers_install.sh \
- $(addprefix $(srcdir)/,$(header-y)) \
- $(addprefix $(gendir)/,$(genhdr-y)) FORCE
+ $(addprefix $(srcdir)/,$(header-files)) \
+ $(addprefix $(gendir)/,$(genhdr-files)) FORCE
$(if $(unwanted),$(call cmd,remove),)
$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
$(call if_changed,install)
--
2.8.1
After the last three patches, all exported headers are under uapi/, thus
input-files2 are not needed anymore.
The side effect is that input-files1-name is exactly header-y.
Note also that input-files3-name is genhdr-y.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
scripts/Makefile.headersinst | 38 ++++++++++++++------------------------
1 file changed, 14 insertions(+), 24 deletions(-)
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 1106d6ca3a38..7bd9df6efe2f 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -40,31 +40,20 @@ wrapper-files := $(filter $(header-y), $(generic-y))
srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
-oldsrcdir := $(srctree)/$(subst /uapi,,$(obj))
-
# all headers files for this dir
header-y := $(filter-out $(generic-y), $(header-y))
all-files := $(header-y) $(genhdr-y) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))
-input-files1 := $(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)), \
- $(wildcard $(srcdir)/$(hdr))) \
- )
-input-files1-name := $(notdir $(input-files1))
-input-files2 := $(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)),, \
- $(if $(wildcard $(oldsrcdir)/$(hdr)), \
- $(wildcard $(oldsrcdir)/$(hdr)), \
- $(error Missing UAPI file $(srcdir)/$(hdr))) \
- ))
-input-files2-name := $(notdir $(input-files2))
-input-files3 := $(foreach hdr, $(genhdr-y), \
- $(if $(wildcard $(gendir)/$(hdr)), \
- $(wildcard $(gendir)/$(hdr)), \
- $(error Missing generated UAPI file $(gendir)/$(hdr)) \
- ))
-input-files3-name := $(notdir $(input-files3))
+# Check that all expected files exist
+$(foreach hdr, $(header-y), \
+ $(if $(wildcard $(srcdir)/$(hdr)),, \
+ $(error Missing UAPI file $(srcdir)/$(hdr)) \
+ ))
+$(foreach hdr, $(genhdr-y), \
+ $(if $(wildcard $(gendir)/$(hdr)),, \
+ $(error Missing generated UAPI file $(gendir)/$(hdr)) \
+ ))
# Work out what needs to be removed
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
@@ -78,9 +67,8 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(input-files1-name); \
- $(CONFIG_SHELL) $< $(installdir) $(oldsrcdir) $(input-files2-name); \
- $(CONFIG_SHELL) $< $(installdir) $(gendir) $(input-files3-name); \
+ $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-y); \
+ $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-y); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
@@ -106,7 +94,9 @@ __headersinst: $(subdirs) $(install-file)
@:
targets += $(install-file)
-$(install-file): scripts/headers_install.sh $(input-files1) $(input-files2) $(input-files3) FORCE
+$(install-file): scripts/headers_install.sh \
+ $(addprefix $(srcdir)/,$(header-y)) \
+ $(addprefix $(gendir)/,$(genhdr-y)) FORCE
$(if $(unwanted),$(call cmd,remove),)
$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
$(call if_changed,install)
--
2.8.1
This patch prepares the uapi export by fixing the following error:
.../linux/cryptouser.h:58:16: error: ‘CRYPTO_MAX_ALG_NAME’ undeclared here (not in a function)
char cru_name[CRYPTO_MAX_ALG_NAME];
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Herbert Xu <[email protected]>
---
include/linux/crypto.h | 2 +-
include/uapi/linux/crypto.h | 14 ++++++++++++++
include/uapi/linux/cryptouser.h | 6 ++++++
3 files changed, 21 insertions(+), 1 deletion(-)
create mode 100644 include/uapi/linux/crypto.h
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index c0b0cf3d2d2f..cc2425ba8527 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/uaccess.h>
+#include <uapi/linux/crypto.h>
/*
* Autoloaded crypto modules should only use a prefixed name to avoid allowing
@@ -123,7 +124,6 @@
/*
* Miscellaneous stuff.
*/
-#define CRYPTO_MAX_ALG_NAME 64
/*
* The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual
diff --git a/include/uapi/linux/crypto.h b/include/uapi/linux/crypto.h
new file mode 100644
index 000000000000..e342c5a5ac50
--- /dev/null
+++ b/include/uapi/linux/crypto.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2017 Nicolas Dichtel <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI_CRYPTO_H
+#define _UAPI_CRYPTO_H
+
+#define CRYPTO_MAX_ALG_NAME 64
+
+#endif /* _UAPI_CRYPTO_H */
diff --git a/include/uapi/linux/cryptouser.h b/include/uapi/linux/cryptouser.h
index c6a09c5261e7..ce3c64fb89e1 100644
--- a/include/uapi/linux/cryptouser.h
+++ b/include/uapi/linux/cryptouser.h
@@ -18,7 +18,11 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#ifndef _UAPI_CRYPTOUSER_H
+#define _UAPI_CRYPTOUSER_H
+
#include <linux/types.h>
+#include <linux/crypto.h>
/* Netlink configuration messages. */
enum {
@@ -121,3 +125,5 @@ struct crypto_report_acomp {
#define CRYPTO_REPORT_MAXSIZE (sizeof(struct crypto_user_alg) + \
sizeof(struct crypto_report_blkcipher))
+
+#endif /* _UAPI_CRYPTOUSER_H */
--
2.8.1
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
arch/h8300/include/asm/bitsperlong.h | 14 --------------
arch/h8300/include/uapi/asm/bitsperlong.h | 14 ++++++++++++++
2 files changed, 14 insertions(+), 14 deletions(-)
delete mode 100644 arch/h8300/include/asm/bitsperlong.h
create mode 100644 arch/h8300/include/uapi/asm/bitsperlong.h
diff --git a/arch/h8300/include/asm/bitsperlong.h b/arch/h8300/include/asm/bitsperlong.h
deleted file mode 100644
index e140e46729ac..000000000000
--- a/arch/h8300/include/asm/bitsperlong.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_H8300_BITS_PER_LONG
-#define __ASM_H8300_BITS_PER_LONG
-
-#include <asm-generic/bitsperlong.h>
-
-#if !defined(__ASSEMBLY__)
-/* h8300-unknown-linux required long */
-#define __kernel_size_t __kernel_size_t
-typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
-typedef long __kernel_ptrdiff_t;
-#endif
-
-#endif /* __ASM_H8300_BITS_PER_LONG */
diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
new file mode 100644
index 000000000000..e56cf72369b6
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,14 @@
+#ifndef _UAPI_ASM_H8300_BITS_PER_LONG
+#define _UAPI_ASM_H8300_BITS_PER_LONG
+
+#include <asm-generic/bitsperlong.h>
+
+#if !defined(__ASSEMBLY__)
+/* h8300-unknown-linux required long */
+#define __kernel_size_t __kernel_size_t
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#endif
+
+#endif /* _UAPI_ASM_H8300_BITS_PER_LONG */
--
2.8.1
This header file is exported, but from a userland pov, it's just a wrapper
to asm-generic/setup.h.
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: Tobias Klauser <[email protected]>
---
arch/nios2/include/uapi/asm/Kbuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
index e0bb972a50d7..69c965304146 100644
--- a/arch/nios2/include/uapi/asm/Kbuild
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -2,4 +2,5 @@ include include/uapi/asm-generic/Kbuild.asm
header-y += elf.h
+generic-y += setup.h
generic-y += ucontext.h
--
2.8.1
This patch prepares the uapi export by fixing the following errors:
.../linux/btrfs_tree.h:283:2: error: #error "UUID items require BTRFS_UUID_SIZE == 16!"
#error "UUID items require BTRFS_UUID_SIZE == 16!"
.../linux/btrfs_tree.h:390:12: error: ‘BTRFS_UUID_SIZE’ undeclared here (not in a function)
__u8 uuid[BTRFS_UUID_SIZE];
^
.../linux/btrfs_tree.h:796:16: error: ‘BTRFS_DEV_STAT_VALUES_MAX’ undeclared here (not in a function)
__le64 values[BTRFS_DEV_STAT_VALUES_MAX];
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/uapi/linux/btrfs_tree.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
index 6a261cb52d95..6a754ada59af 100644
--- a/include/uapi/linux/btrfs_tree.h
+++ b/include/uapi/linux/btrfs_tree.h
@@ -2,6 +2,7 @@
#define _BTRFS_CTREE_H_
#include <linux/types.h>
+#include <linux/btrfs.h>
/*
* This header contains the structure definitions and constants used
--
2.8.1
Some files will be exported after a following patch. 0-day tests report the
following warning/error:
./usr/include/linux/bcache.h:8: include of <linux/types.h> is preferred over <asm/types.h>
./usr/include/linux/bcache.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/qrtr.h:8: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/cryptouser.h:39: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/pr.h:14: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/btrfs_tree.h:337: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/rdma/bnxt_re-abi.h:45: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/uapi/linux/bcache.h | 2 +-
include/uapi/linux/btrfs_tree.h | 2 ++
include/uapi/linux/cryptouser.h | 2 ++
include/uapi/linux/pr.h | 2 ++
include/uapi/linux/qrtr.h | 1 +
include/uapi/rdma/bnxt_re-abi.h | 2 ++
6 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/bcache.h b/include/uapi/linux/bcache.h
index 22b6ad31c706..e3bb0635e94a 100644
--- a/include/uapi/linux/bcache.h
+++ b/include/uapi/linux/bcache.h
@@ -5,7 +5,7 @@
* Bcache on disk data structures
*/
-#include <asm/types.h>
+#include <linux/types.h>
#define BITMASK(name, type, field, offset, size) \
static inline __u64 name(const type *k) \
diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
index d5ad15a106a7..6a261cb52d95 100644
--- a/include/uapi/linux/btrfs_tree.h
+++ b/include/uapi/linux/btrfs_tree.h
@@ -1,6 +1,8 @@
#ifndef _BTRFS_CTREE_H_
#define _BTRFS_CTREE_H_
+#include <linux/types.h>
+
/*
* This header contains the structure definitions and constants used
* by file system objects that can be retrieved using
diff --git a/include/uapi/linux/cryptouser.h b/include/uapi/linux/cryptouser.h
index 11d21fce14d6..c6a09c5261e7 100644
--- a/include/uapi/linux/cryptouser.h
+++ b/include/uapi/linux/cryptouser.h
@@ -18,6 +18,8 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#include <linux/types.h>
+
/* Netlink configuration messages. */
enum {
CRYPTO_MSG_BASE = 0x10,
diff --git a/include/uapi/linux/pr.h b/include/uapi/linux/pr.h
index 57d7c0f916b6..645ef3cf3dd0 100644
--- a/include/uapi/linux/pr.h
+++ b/include/uapi/linux/pr.h
@@ -1,6 +1,8 @@
#ifndef _UAPI_PR_H
#define _UAPI_PR_H
+#include <linux/types.h>
+
enum pr_type {
PR_WRITE_EXCLUSIVE = 1,
PR_EXCLUSIVE_ACCESS = 2,
diff --git a/include/uapi/linux/qrtr.h b/include/uapi/linux/qrtr.h
index 66c0748d26e2..b14ee91ec387 100644
--- a/include/uapi/linux/qrtr.h
+++ b/include/uapi/linux/qrtr.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_QRTR_H
#define _LINUX_QRTR_H
+#include <linux/types.h>
#include <linux/socket.h>
struct sockaddr_qrtr {
diff --git a/include/uapi/rdma/bnxt_re-abi.h b/include/uapi/rdma/bnxt_re-abi.h
index e2c8a3f0ccec..74018bd18d72 100644
--- a/include/uapi/rdma/bnxt_re-abi.h
+++ b/include/uapi/rdma/bnxt_re-abi.h
@@ -39,6 +39,8 @@
#ifndef __BNXT_RE_UVERBS_ABI_H__
#define __BNXT_RE_UVERBS_ABI_H__
+#include <linux/types.h>
+
#define BNXT_RE_ABI_VERSION 1
struct bnxt_re_uctx_resp {
--
2.8.1
This patch prepares the uapi export by fixing the following error:
.../linux/smc_diag.h:6:27: fatal error: rdma/ib_verbs.h: No such file or directory
#include <rdma/ib_verbs.h>
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/rdma/ib_verbs.h | 3 +--
include/uapi/linux/smc_diag.h | 2 +-
include/uapi/rdma/ib_user_verbs.h | 2 ++
3 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 0f1813c13687..50f276a4afdc 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -61,6 +61,7 @@
#include <linux/mmu_notifier.h>
#include <linux/uaccess.h>
#include <linux/cgroup_rdma.h>
+#include <uapi/rdma/ib_user_verbs.h>
extern struct workqueue_struct *ib_wq;
extern struct workqueue_struct *ib_comp_wq;
@@ -1838,8 +1839,6 @@ enum ib_mad_result {
IB_MAD_RESULT_CONSUMED = 1 << 2 /* Packet consumed: stop processing */
};
-#define IB_DEVICE_NAME_MAX 64
-
struct ib_port_cache {
struct ib_pkey_cache *pkey;
struct ib_gid_table *gid;
diff --git a/include/uapi/linux/smc_diag.h b/include/uapi/linux/smc_diag.h
index 0063919fea34..87712bfaa9dd 100644
--- a/include/uapi/linux/smc_diag.h
+++ b/include/uapi/linux/smc_diag.h
@@ -3,7 +3,7 @@
#include <linux/types.h>
#include <linux/inet_diag.h>
-#include <rdma/ib_verbs.h>
+#include <rdma/ib_user_verbs.h>
/* Request structure */
struct smc_diag_req {
diff --git a/include/uapi/rdma/ib_user_verbs.h b/include/uapi/rdma/ib_user_verbs.h
index 997f904c7692..8edce2b65903 100644
--- a/include/uapi/rdma/ib_user_verbs.h
+++ b/include/uapi/rdma/ib_user_verbs.h
@@ -1124,4 +1124,6 @@ struct ib_uverbs_ex_destroy_rwq_ind_table {
__u32 ind_tbl_handle;
};
+#define IB_DEVICE_NAME_MAX 64
+
#endif /* IB_USER_VERBS_H */
--
2.8.1
This option was added in commit c7bb349e7c25 ("kbuild: introduce destination-y
for exported headers") but never used in-tree.
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Paul Bolle <[email protected]>
---
Documentation/kbuild/makefiles.txt | 23 ++++-------------------
scripts/Makefile.headersinst | 2 +-
2 files changed, 5 insertions(+), 20 deletions(-)
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 9b9c4797fc55..37b525d329ae 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -46,9 +46,8 @@ This document describes the Linux kernel Makefiles.
=== 7 Kbuild syntax for exported headers
--- 7.1 header-y
--- 7.2 genhdr-y
- --- 7.3 destination-y
- --- 7.4 generic-y
- --- 7.5 generated-y
+ --- 7.3 generic-y
+ --- 7.4 generated-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1295,21 +1294,7 @@ See subsequent chapter for the syntax of the Kbuild file.
#include/linux/Kbuild
genhdr-y += version.h
- --- 7.3 destination-y
-
- When an architecture has a set of exported headers that needs to be
- exported to a different directory destination-y is used.
- destination-y specifies the destination directory for all exported
- headers in the file where it is present.
-
- Example:
- #arch/xtensa/platforms/s6105/include/platform/Kbuild
- destination-y := include/linux
-
- In the example above all exported headers in the Kbuild file
- will be located in the directory "include/linux" when exported.
-
- --- 7.4 generic-y
+ --- 7.3 generic-y
If an architecture uses a verbatim copy of a header from
include/asm-generic then this is listed in the file
@@ -1336,7 +1321,7 @@ See subsequent chapter for the syntax of the Kbuild file.
Example: termios.h
#include <asm-generic/termios.h>
- --- 7.5 generated-y
+ --- 7.4 generated-y
If an architecture generates other header files alongside generic-y
wrappers, and not included in genhdr-y, then generated-y specifies
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 7bd9df6efe2f..ca5d439c9abf 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -14,7 +14,7 @@ kbuild-file := $(srctree)/$(obj)/Kbuild
include $(kbuild-file)
# called may set destination dir (when installing to asm/)
-_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))
+_dst := $(if $(dst),$(dst),$(obj))
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
--
2.8.1
Even if this file was not in an uapi directory, it was exported because
it was listed in the Kbuild file.
Fixes: b72e7464e4cf ("x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers")
Suggested-by: Borislav Petkov <[email protected]>
CC: Ingo Molnar <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
---
arch/x86/include/uapi/asm/Kbuild | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
index 3dec769cadf7..1c532b3f18ea 100644
--- a/arch/x86/include/uapi/asm/Kbuild
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -27,7 +27,6 @@ header-y += ldt.h
header-y += mce.h
header-y += mman.h
header-y += msgbuf.h
-header-y += msr-index.h
header-y += msr.h
header-y += mtrr.h
header-y += param.h
--
2.8.1
Le 14/03/2017 à 13:54, Nicolas Dichtel a écrit :
> Patches #1 and #2 are just cleanup: some exported headers were still under
> a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
> not under an uapi directory.
> After these three patches, all exported headers are under an uapi directory:
> path #4 stops searching files in non uapi directories.
> The patch #5 was spotted by code review: there is no in-tree user of this
> functionality.
> Patch #6 fixes some warnings/errors reported by 0-day tests.
> Patch #7 to #9 fix some errors when the corresponding files are included by
> userland.
> Patches #10 and #11 remove the need to list explicitly headers. Now all files
> under an uapi directory are exported.
>
> This series has been tested with a 'make headers_install' on x86 and a
> 'make headers_install_all'. I've checked the result of both commands.
>
> This patch is built on top of masahiroy/linux-kbuild.git#for-next (v4.11-rc1).
> I didn't find any conflict with v4.11-rc2.
Masahiro, is this series under review or do you expect something else on my side?
Regards,
Nicolas
Hi Nicolas,
2017-03-24 17:32 GMT+09:00 Nicolas Dichtel <[email protected]>:
> Le 14/03/2017 à 13:54, Nicolas Dichtel a écrit :
>> Patches #1 and #2 are just cleanup: some exported headers were still under
>> a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
>> not under an uapi directory.
>> After these three patches, all exported headers are under an uapi directory:
>> path #4 stops searching files in non uapi directories.
>> The patch #5 was spotted by code review: there is no in-tree user of this
>> functionality.
>> Patch #6 fixes some warnings/errors reported by 0-day tests.
>> Patch #7 to #9 fix some errors when the corresponding files are included by
>> userland.
>> Patches #10 and #11 remove the need to list explicitly headers. Now all files
>> under an uapi directory are exported.
>>
>> This series has been tested with a 'make headers_install' on x86 and a
>> 'make headers_install_all'. I've checked the result of both commands.
>>
>> This patch is built on top of masahiroy/linux-kbuild.git#for-next (v4.11-rc1).
>> I didn't find any conflict with v4.11-rc2.
> Masahiro, is this series under review or do you expect something else on my side?
>
Under review.
Please give me time to take a closer look.
Sorry for the delay.
--
Best Regards
Masahiro Yamada
Le 24/03/2017 à 09:42, Masahiro Yamada a écrit :
> Hi Nicolas,
>
>
> 2017-03-24 17:32 GMT+09:00 Nicolas Dichtel <[email protected]>:
>> Le 14/03/2017 à 13:54, Nicolas Dichtel a écrit :
>>> Patches #1 and #2 are just cleanup: some exported headers were still under
>>> a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
>>> not under an uapi directory.
>>> After these three patches, all exported headers are under an uapi directory:
>>> path #4 stops searching files in non uapi directories.
>>> The patch #5 was spotted by code review: there is no in-tree user of this
>>> functionality.
>>> Patch #6 fixes some warnings/errors reported by 0-day tests.
>>> Patch #7 to #9 fix some errors when the corresponding files are included by
>>> userland.
>>> Patches #10 and #11 remove the need to list explicitly headers. Now all files
>>> under an uapi directory are exported.
>>>
>>> This series has been tested with a 'make headers_install' on x86 and a
>>> 'make headers_install_all'. I've checked the result of both commands.
>>>
>>> This patch is built on top of masahiroy/linux-kbuild.git#for-next (v4.11-rc1).
>>> I didn't find any conflict with v4.11-rc2.
>> Masahiro, is this series under review or do you expect something else on my side?
>>
>
> Under review.
> Please give me time to take a closer look.
> Sorry for the delay.
No problem, take your time. I just wanted to be sure to not miss something ;-)
Thank you,
Nicolas
Hi Nicolas,
2017-03-14 21:54 GMT+09:00 Nicolas Dichtel <[email protected]>:
> This header file is exported, thus move it to uapi.
>
> Signed-off-by: Nicolas Dichtel <[email protected]>
> -#endif /* __ASM_H8300_BITS_PER_LONG */
> diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
> new file mode 100644
> index 000000000000..e56cf72369b6
> --- /dev/null
> +++ b/arch/h8300/include/uapi/asm/bitsperlong.h
> @@ -0,0 +1,14 @@
> +#ifndef _UAPI_ASM_H8300_BITS_PER_LONG
> +#define _UAPI_ASM_H8300_BITS_PER_LONG
Just a minor comment.
The include guard was originally __ASM_H8300_BITS_PER_LONG.
This will change it into _ASM_H8300_BITS_PER_LONG
(after _UAPI is stripped by headers_install.sh)
I just thought _UAPI__ASM_H8300_BITS_PER_LONG might be even safer,
but I know I am nit-picking. I can apply this as-is.
I leave it to you.
--
Best Regards
Masahiro Yamada
Hi Nicolas,
2017-03-14 21:54 GMT+09:00 Nicolas Dichtel <[email protected]>:
> diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
> index d0c5471856e0..b15bf6bc0e94 100644
> --- a/arch/cris/include/uapi/asm/Kbuild
> +++ b/arch/cris/include/uapi/asm/Kbuild
> @@ -1,5 +1,2 @@
> # UAPI Header export list
> include include/uapi/asm-generic/Kbuild.asm
> -
> -subdir-y += ../arch-v10/arch/
> -subdir-y += ../arch-v32/arch/
Can you remove
arch/cris/include/arch-v32/arch/Kbuild
arch/cris/include/arch-v10/arch/Kbuild
as well?
Or, not sure if they are still needed?
> diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
> index e0a50111e07f..0c74c3c5ebfa 100644
> --- a/arch/tile/include/uapi/asm/Kbuild
> +++ b/arch/tile/include/uapi/asm/Kbuild
> @@ -2,5 +2,3 @@
> include include/uapi/asm-generic/Kbuild.asm
>
> generic-y += ucontext.h
> -
> -subdir-y += ../arch
Can you remove arch/tile/include/arch/Kbuild as well?
--
Best Regards
Masahiro Yamada
Hi Nocolas,
2017-03-24 18:03 GMT+09:00 Nicolas Dichtel <[email protected]>:
> Le 24/03/2017 à 09:42, Masahiro Yamada a écrit :
>> Hi Nicolas,
>>
>>
>> 2017-03-24 17:32 GMT+09:00 Nicolas Dichtel <[email protected]>:
>>> Le 14/03/2017 à 13:54, Nicolas Dichtel a écrit :
>>>> Patches #1 and #2 are just cleanup: some exported headers were still under
>>>> a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
>>>> not under an uapi directory.
>>>> After these three patches, all exported headers are under an uapi directory:
>>>> path #4 stops searching files in non uapi directories.
>>>> The patch #5 was spotted by code review: there is no in-tree user of this
>>>> functionality.
>>>> Patch #6 fixes some warnings/errors reported by 0-day tests.
>>>> Patch #7 to #9 fix some errors when the corresponding files are included by
>>>> userland.
>>>> Patches #10 and #11 remove the need to list explicitly headers. Now all files
>>>> under an uapi directory are exported.
>>>>
>>>> This series has been tested with a 'make headers_install' on x86 and a
>>>> 'make headers_install_all'. I've checked the result of both commands.
>>>>
>>>> This patch is built on top of masahiroy/linux-kbuild.git#for-next (v4.11-rc1).
>>>> I didn't find any conflict with v4.11-rc2.
>>> Masahiro, is this series under review or do you expect something else on my side?
>>>
>>
>> Under review.
>> Please give me time to take a closer look.
>> Sorry for the delay.
> No problem, take your time. I just wanted to be sure to not miss something ;-)
>
>
As a whole, this series is amazing. Thanks for your great work!
I added some comments, but they are trivial.
I wanted to leave comments/questions on 10/11,
but I could not find 10/11 in my mailbox. I do not know why.
I am leaving comments on the cover-letter,
the following are related to 10/11.
[1]
>mandatory-y += $(foreach hdr,$(opt-header), \
> $(if \
> $(wildcard \
> $(srctree)/arch/$(SRCARCH)/include/uapi/asm/$(hdr) \
> $(srctree)/arch/$(SRCARCH)/include/asm/$(hdr) \
> ), \
> $(hdr) \
> ))
What is this actually checking?
If ARCH has its own (uapi/)asm/{kvm.h,kvm_para.h,a.out.h},
they are added to mandatory-y, then they are checked if they exist.
But, we know they exist.
This check reminds us only when we added asm/*.h
but forgot to add uapi/asm/*.h
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/$(hdr) seems unneeded at least.
(perhaps, the whole hunk might be unneeded.)
[2]
>ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
> $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
>header-n += a.out.h
>endif
>
>ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
> $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
>header-n += kvm.h
>endif
>
>ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
> $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
>header-n += kvm_para.h
>endif
This series intends all headers are exported from uapi/, correct?
Do we still need to check $(srctree)/arch/$(SRCARCH)/include/asm/*.h ?
(related to [1])
[3]
>--- 7.1 header-n
>
>header-n is essentially used by include/uapi/linux/Kbuild to avoid
>exporting specific headers (e.g. kvm.h) on architectures that do not
>support it. It should be avoided as much as possible.
Going forward, header-y will be never used
because uapi/ is exported by default.
So, I wonder if we could rename this into something clearer.
Kbuild supports "no-clean-files".
(Please see ./Kbuild for its usage)
I guess this notation seems clearer
when we want to negate the default behavior.
Can you consider "no-export", "no-export-files", "no-export-headers"
or whatever you like?
Thanks!
--
Best Regards
Masahiro Yamada
Hi Nicolas,
2017-03-14 21:54 GMT+09:00 Nicolas Dichtel <[email protected]>:
> This patch prepares the uapi export by fixing the following errors:
>
> .../linux/btrfs_tree.h:283:2: error: #error "UUID items require BTRFS_UUID_SIZE == 16!"
> #error "UUID items require BTRFS_UUID_SIZE == 16!"
>
> .../linux/btrfs_tree.h:390:12: error: ‘BTRFS_UUID_SIZE’ undeclared here (not in a function)
> __u8 uuid[BTRFS_UUID_SIZE];
> ^
> .../linux/btrfs_tree.h:796:16: error: ‘BTRFS_DEV_STAT_VALUES_MAX’ undeclared here (not in a function)
> __le64 values[BTRFS_DEV_STAT_VALUES_MAX];
>
> Signed-off-by: Nicolas Dichtel <[email protected]>
> ---
> include/uapi/linux/btrfs_tree.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
> index 6a261cb52d95..6a754ada59af 100644
> --- a/include/uapi/linux/btrfs_tree.h
> +++ b/include/uapi/linux/btrfs_tree.h
> @@ -2,6 +2,7 @@
> #define _BTRFS_CTREE_H_
>
> #include <linux/types.h>
> +#include <linux/btrfs.h>
>
Can you move <linux/types.h> below <linux/btrfs.h>
to sort the includes alphabetically?
This also applies to:
include/uapi/linux/qrtr.h in 06/11
include/uapi/linux/cryptouser.h in 08/11
--
Best Regards
Masahiro Yamada
Le 27/03/2017 à 07:31, Masahiro Yamada a écrit :
[snip]
>> -#endif /* __ASM_H8300_BITS_PER_LONG */
>> diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
>> new file mode 100644
>> index 000000000000..e56cf72369b6
>> --- /dev/null
>> +++ b/arch/h8300/include/uapi/asm/bitsperlong.h
>> @@ -0,0 +1,14 @@
>> +#ifndef _UAPI_ASM_H8300_BITS_PER_LONG
>> +#define _UAPI_ASM_H8300_BITS_PER_LONG
>
>
> Just a minor comment.
>
> The include guard was originally __ASM_H8300_BITS_PER_LONG.
> This will change it into _ASM_H8300_BITS_PER_LONG
> (after _UAPI is stripped by headers_install.sh)
>
> I just thought _UAPI__ASM_H8300_BITS_PER_LONG might be even safer,
> but I know I am nit-picking. I can apply this as-is.
> I leave it to you.
I intentionnaly "clean" that, but I will restore it, no problem ;-)
Regards,
Nicolas
Hi Masahiro,
Le 27/03/2017 à 07:26, Masahiro Yamada a écrit :
> Hi Nocolas,
>
>
> 2017-03-24 18:03 GMT+09:00 Nicolas Dichtel <[email protected]>:
[snip]
>
>
> As a whole, this series is amazing. Thanks for your great work!
Thank you. And thank you for taking time to review it.
>
>
> I added some comments, but they are trivial.
>
>
>
>
> I wanted to leave comments/questions on 10/11,
> but I could not find 10/11 in my mailbox. I do not know why.
Note that you can download the mail from the kbuild patchwork, open it with your
email client and do a reply ;-)
>
>
> I am leaving comments on the cover-letter,
> the following are related to 10/11.
>
>
>
> [1]
>
>> mandatory-y += $(foreach hdr,$(opt-header), \
>> $(if \
>> $(wildcard \
>> $(srctree)/arch/$(SRCARCH)/include/uapi/asm/$(hdr) \
>> $(srctree)/arch/$(SRCARCH)/include/asm/$(hdr) \
>> ), \
>> $(hdr) \
>> ))
>
> What is this actually checking?
>
> If ARCH has its own (uapi/)asm/{kvm.h,kvm_para.h,a.out.h},
> they are added to mandatory-y, then they are checked if they exist.
> But, we know they exist.
Yes, you're right. With english words : 'those files are mandatory only if they
exist', thus they are not mandatory at all :)
>
>
> This check reminds us only when we added asm/*.h
> but forgot to add uapi/asm/*.h
>
> $(srctree)/arch/$(SRCARCH)/include/uapi/asm/$(hdr) seems unneeded at least.
> (perhaps, the whole hunk might be unneeded.)
I think we can remove the whole hunk (see also [2]).
>
>
>
> [2]
>
>> ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
>> $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
>> header-n += a.out.h
>> endif
>>
>> ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
>> $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
>> header-n += kvm.h
>> endif
>>
>> ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
>> $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
>> header-n += kvm_para.h
>> endif
>
> This series intends all headers are exported from uapi/, correct?
> Do we still need to check $(srctree)/arch/$(SRCARCH)/include/asm/*.h ?
> (related to [1])
No you're right, uapi/asm/*.h is enough. Those files should be exported only if
the uapi/asm/ counterpart exists.
>
>
>
> [3]
>
>> --- 7.1 header-n
>>
>> header-n is essentially used by include/uapi/linux/Kbuild to avoid
>> exporting specific headers (e.g. kvm.h) on architectures that do not
>> support it. It should be avoided as much as possible.
>
>
> Going forward, header-y will be never used
> because uapi/ is exported by default.
>
> So, I wonder if we could rename this into something clearer.
>
> Kbuild supports "no-clean-files".
> (Please see ./Kbuild for its usage)
> I guess this notation seems clearer
> when we want to negate the default behavior.
>
> Can you consider "no-export", "no-export-files", "no-export-headers"
> or whatever you like?
No problem, let's use no-export-headers.
Thank you,
Nicolas
Hi Masahiro,
Le 27/03/2017 à 07:53, Masahiro Yamada a écrit :
> Hi Nicolas,
>
>
> 2017-03-14 21:54 GMT+09:00 Nicolas Dichtel <[email protected]>:
[snip]
>> diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
>> index 6a261cb52d95..6a754ada59af 100644
>> --- a/include/uapi/linux/btrfs_tree.h
>> +++ b/include/uapi/linux/btrfs_tree.h
>> @@ -2,6 +2,7 @@
>> #define _BTRFS_CTREE_H_
>>
>> #include <linux/types.h>
>> +#include <linux/btrfs.h>
>>
>
> Can you move <linux/types.h> below <linux/btrfs.h>
> to sort the includes alphabetically?
Ok.
>
> This also applies to:
>
> include/uapi/linux/qrtr.h in 06/11
> include/uapi/linux/cryptouser.h in 08/11
Ok.
Regards,
Nicolas
Hi Masahiro,
Le 27/03/2017 à 07:27, Masahiro Yamada a écrit :
> Hi Nicolas,
>
>
> 2017-03-14 21:54 GMT+09:00 Nicolas Dichtel <[email protected]>:
>> diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
>> index d0c5471856e0..b15bf6bc0e94 100644
>> --- a/arch/cris/include/uapi/asm/Kbuild
>> +++ b/arch/cris/include/uapi/asm/Kbuild
>> @@ -1,5 +1,2 @@
>> # UAPI Header export list
>> include include/uapi/asm-generic/Kbuild.asm
>> -
>> -subdir-y += ../arch-v10/arch/
>> -subdir-y += ../arch-v32/arch/
>
>
> Can you remove
> arch/cris/include/arch-v32/arch/Kbuild
> arch/cris/include/arch-v10/arch/Kbuild
> as well?
Ok.
>
> Or, not sure if they are still needed?
I don't think so. Have a look to 77c8006d8df4 ("UAPI: Fix up empty files in
arch/cris/") for more details.
>
>
>
>> diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
>> index e0a50111e07f..0c74c3c5ebfa 100644
>> --- a/arch/tile/include/uapi/asm/Kbuild
>> +++ b/arch/tile/include/uapi/asm/Kbuild
>> @@ -2,5 +2,3 @@
>> include include/uapi/asm-generic/Kbuild.asm
>>
>> generic-y += ucontext.h
>> -
>> -subdir-y += ../arch
>
> Can you remove arch/tile/include/arch/Kbuild as well?
Ok.
Because this removal is not directly related to this patch, I will add another
patch in the series.
Regards,
Nicolas
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
arch/h8300/include/asm/bitsperlong.h | 14 --------------
arch/h8300/include/uapi/asm/bitsperlong.h | 14 ++++++++++++++
2 files changed, 14 insertions(+), 14 deletions(-)
delete mode 100644 arch/h8300/include/asm/bitsperlong.h
create mode 100644 arch/h8300/include/uapi/asm/bitsperlong.h
diff --git a/arch/h8300/include/asm/bitsperlong.h b/arch/h8300/include/asm/bitsperlong.h
deleted file mode 100644
index e140e46729ac..000000000000
--- a/arch/h8300/include/asm/bitsperlong.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_H8300_BITS_PER_LONG
-#define __ASM_H8300_BITS_PER_LONG
-
-#include <asm-generic/bitsperlong.h>
-
-#if !defined(__ASSEMBLY__)
-/* h8300-unknown-linux required long */
-#define __kernel_size_t __kernel_size_t
-typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
-typedef long __kernel_ptrdiff_t;
-#endif
-
-#endif /* __ASM_H8300_BITS_PER_LONG */
diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
new file mode 100644
index 000000000000..34212608371e
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,14 @@
+#ifndef _UAPI__ASM_H8300_BITS_PER_LONG
+#define _UAPI__ASM_H8300_BITS_PER_LONG
+
+#include <asm-generic/bitsperlong.h>
+
+#if !defined(__ASSEMBLY__)
+/* h8300-unknown-linux required long */
+#define __kernel_size_t __kernel_size_t
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#endif
+
+#endif /* _UAPI__ASM_H8300_BITS_PER_LONG */
--
2.8.1
Patches #1 and #2 are just cleanup: some exported headers were still under
a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
not under an uapi directory.
After these three patches, all exported headers are under an uapi directory:
path #4 stops searching files in non uapi directories.
The patch #5 was spotted by code review: there is no in-tree user of this
functionality.
Patch #6 fixes some warnings/errors reported by 0-day tests.
Patch #7 to #9 fix some errors when the corresponding files are included by
userland.
Patches #10 and #11 remove the need to list explicitly headers. Now all files
under an uapi directory are exported.
Patch #12 is also a small cleanup.
This series has been tested with a 'make headers_install' on x86 and a
'make headers_install_all'. I've checked the result of both commands.
This patch is built on top of masahiroy/linux-kbuild.git#for-next (v4.11-rc1).
I didn't find any conflict with v4.11-rc4.
v10 -> v11:
- patch #1: restore the double '_' in the header guard
- patch #6, #7, #8: order '#include' in alphabetical order
- patch #10: rename header-n to no-export-headers
cleanup management of kvm.h, kvm_para.h and a.out.h
- patch #12: add it
- rebase on top of masahiroy/linux-kbuild.git#for-next
v9 -> v10:
- rebase on top of masahiroy/linux-kbuild.git#for-next
- patch #4 & #10: fix dependency check
- fix some typos in commits logs
v8 -> v9:
- rebase on top of linus tree
- patch #8: add include/uapi/linux/crypto.h
v7 -> v8:
- rebase on top of linus tree
- add patch #7, #8 and #9
v6 -> v7:
- rebase on top of linus tree
- patch #7: remove autogenerated files from the list in the commit log
v5 -> v6:
- patch #6: remove change of include/uapi/linux/media.h
- patch #7: fix hdr export when 'make O=' is used (look for genhdr files in
the right directory)
- patch #8: fix 'make headers_check'
v4 -> v5:
- patch #3: get back to v3 (don't export msr-index.h)
- patch #6: new in this version
- patch #7: fix compilation by introducing header-n
v3 -> v4:
- first patch has been included
- patch #4: get back to v2 and remove arch/x86/include/asm/msr-index.h
v2 -> v3:
- patch #1: remove arch/arm/include/asm/types.h
- patch #2: remove arch/h8300/include/asm/bitsperlong.h
- patch #3: remove arch/nios2/include/uapi/asm/setup.h
- patch #4: don't export msr-index.h
- patch #5: fix a typo: s/unput-files3-name/input-files3-name
- patch #6: no change
- patch #7: fix include/uapi/asm-generic/Kbuild.asm by introducing mandatory-y
- add patch #8
v1 -> v2:
- add patch #1 to #6
- patch #7: remove use of header-y
Comments are welcomed,
Nicolas
Even if this file was not in an uapi directory, it was exported because
it was listed in the Kbuild file.
Fixes: b72e7464e4cf ("x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers")
Suggested-by: Borislav Petkov <[email protected]>
CC: Ingo Molnar <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
---
arch/x86/include/uapi/asm/Kbuild | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
index 3dec769cadf7..1c532b3f18ea 100644
--- a/arch/x86/include/uapi/asm/Kbuild
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -27,7 +27,6 @@ header-y += ldt.h
header-y += mce.h
header-y += mman.h
header-y += msgbuf.h
-header-y += msr-index.h
header-y += msr.h
header-y += mtrr.h
header-y += param.h
--
2.8.1
This patch prepares the uapi export by fixing the following error:
.../linux/cryptouser.h:58:16: error: ‘CRYPTO_MAX_ALG_NAME’ undeclared here (not in a function)
char cru_name[CRYPTO_MAX_ALG_NAME];
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Herbert Xu <[email protected]>
---
include/linux/crypto.h | 2 +-
include/uapi/linux/crypto.h | 14 ++++++++++++++
include/uapi/linux/cryptouser.h | 6 ++++++
3 files changed, 21 insertions(+), 1 deletion(-)
create mode 100644 include/uapi/linux/crypto.h
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
index c0b0cf3d2d2f..cc2425ba8527 100644
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/uaccess.h>
+#include <uapi/linux/crypto.h>
/*
* Autoloaded crypto modules should only use a prefixed name to avoid allowing
@@ -123,7 +124,6 @@
/*
* Miscellaneous stuff.
*/
-#define CRYPTO_MAX_ALG_NAME 64
/*
* The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual
diff --git a/include/uapi/linux/crypto.h b/include/uapi/linux/crypto.h
new file mode 100644
index 000000000000..e342c5a5ac50
--- /dev/null
+++ b/include/uapi/linux/crypto.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2017 Nicolas Dichtel <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI_CRYPTO_H
+#define _UAPI_CRYPTO_H
+
+#define CRYPTO_MAX_ALG_NAME 64
+
+#endif /* _UAPI_CRYPTO_H */
diff --git a/include/uapi/linux/cryptouser.h b/include/uapi/linux/cryptouser.h
index c6a09c5261e7..751e7daef54a 100644
--- a/include/uapi/linux/cryptouser.h
+++ b/include/uapi/linux/cryptouser.h
@@ -18,6 +18,10 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#ifndef _UAPI_CRYPTOUSER_H
+#define _UAPI_CRYPTOUSER_H
+
+#include <linux/crypto.h>
#include <linux/types.h>
/* Netlink configuration messages. */
@@ -121,3 +125,5 @@ struct crypto_report_acomp {
#define CRYPTO_REPORT_MAXSIZE (sizeof(struct crypto_user_alg) + \
sizeof(struct crypto_report_blkcipher))
+
+#endif /* _UAPI_CRYPTOUSER_H */
--
2.8.1
Some files will be exported after a following patch. 0-day tests report the
following warning/error:
./usr/include/linux/bcache.h:8: include of <linux/types.h> is preferred over <asm/types.h>
./usr/include/linux/bcache.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/qrtr.h:8: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/cryptouser.h:39: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/pr.h:14: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/btrfs_tree.h:337: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/rdma/bnxt_re-abi.h:45: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/uapi/linux/bcache.h | 2 +-
include/uapi/linux/btrfs_tree.h | 2 ++
include/uapi/linux/cryptouser.h | 2 ++
include/uapi/linux/pr.h | 2 ++
include/uapi/linux/qrtr.h | 1 +
include/uapi/rdma/bnxt_re-abi.h | 2 ++
6 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/bcache.h b/include/uapi/linux/bcache.h
index 22b6ad31c706..e3bb0635e94a 100644
--- a/include/uapi/linux/bcache.h
+++ b/include/uapi/linux/bcache.h
@@ -5,7 +5,7 @@
* Bcache on disk data structures
*/
-#include <asm/types.h>
+#include <linux/types.h>
#define BITMASK(name, type, field, offset, size) \
static inline __u64 name(const type *k) \
diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
index d5ad15a106a7..6a261cb52d95 100644
--- a/include/uapi/linux/btrfs_tree.h
+++ b/include/uapi/linux/btrfs_tree.h
@@ -1,6 +1,8 @@
#ifndef _BTRFS_CTREE_H_
#define _BTRFS_CTREE_H_
+#include <linux/types.h>
+
/*
* This header contains the structure definitions and constants used
* by file system objects that can be retrieved using
diff --git a/include/uapi/linux/cryptouser.h b/include/uapi/linux/cryptouser.h
index 11d21fce14d6..c6a09c5261e7 100644
--- a/include/uapi/linux/cryptouser.h
+++ b/include/uapi/linux/cryptouser.h
@@ -18,6 +18,8 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#include <linux/types.h>
+
/* Netlink configuration messages. */
enum {
CRYPTO_MSG_BASE = 0x10,
diff --git a/include/uapi/linux/pr.h b/include/uapi/linux/pr.h
index 57d7c0f916b6..645ef3cf3dd0 100644
--- a/include/uapi/linux/pr.h
+++ b/include/uapi/linux/pr.h
@@ -1,6 +1,8 @@
#ifndef _UAPI_PR_H
#define _UAPI_PR_H
+#include <linux/types.h>
+
enum pr_type {
PR_WRITE_EXCLUSIVE = 1,
PR_EXCLUSIVE_ACCESS = 2,
diff --git a/include/uapi/linux/qrtr.h b/include/uapi/linux/qrtr.h
index 66c0748d26e2..9d76c566f66e 100644
--- a/include/uapi/linux/qrtr.h
+++ b/include/uapi/linux/qrtr.h
@@ -2,6 +2,7 @@
#define _LINUX_QRTR_H
#include <linux/socket.h>
+#include <linux/types.h>
struct sockaddr_qrtr {
__kernel_sa_family_t sq_family;
diff --git a/include/uapi/rdma/bnxt_re-abi.h b/include/uapi/rdma/bnxt_re-abi.h
index e2c8a3f0ccec..74018bd18d72 100644
--- a/include/uapi/rdma/bnxt_re-abi.h
+++ b/include/uapi/rdma/bnxt_re-abi.h
@@ -39,6 +39,8 @@
#ifndef __BNXT_RE_UVERBS_ABI_H__
#define __BNXT_RE_UVERBS_ABI_H__
+#include <linux/types.h>
+
#define BNXT_RE_ABI_VERSION 1
struct bnxt_re_uctx_resp {
--
2.8.1
After the last three patches, all exported headers are under uapi/, thus
input-files2 are not needed anymore.
The side effect is that input-files1-name is exactly header-y.
Note also that input-files3-name is genhdr-y.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
scripts/Makefile.headersinst | 38 ++++++++++++++------------------------
1 file changed, 14 insertions(+), 24 deletions(-)
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 1106d6ca3a38..7bd9df6efe2f 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -40,31 +40,20 @@ wrapper-files := $(filter $(header-y), $(generic-y))
srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
-oldsrcdir := $(srctree)/$(subst /uapi,,$(obj))
-
# all headers files for this dir
header-y := $(filter-out $(generic-y), $(header-y))
all-files := $(header-y) $(genhdr-y) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))
-input-files1 := $(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)), \
- $(wildcard $(srcdir)/$(hdr))) \
- )
-input-files1-name := $(notdir $(input-files1))
-input-files2 := $(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)),, \
- $(if $(wildcard $(oldsrcdir)/$(hdr)), \
- $(wildcard $(oldsrcdir)/$(hdr)), \
- $(error Missing UAPI file $(srcdir)/$(hdr))) \
- ))
-input-files2-name := $(notdir $(input-files2))
-input-files3 := $(foreach hdr, $(genhdr-y), \
- $(if $(wildcard $(gendir)/$(hdr)), \
- $(wildcard $(gendir)/$(hdr)), \
- $(error Missing generated UAPI file $(gendir)/$(hdr)) \
- ))
-input-files3-name := $(notdir $(input-files3))
+# Check that all expected files exist
+$(foreach hdr, $(header-y), \
+ $(if $(wildcard $(srcdir)/$(hdr)),, \
+ $(error Missing UAPI file $(srcdir)/$(hdr)) \
+ ))
+$(foreach hdr, $(genhdr-y), \
+ $(if $(wildcard $(gendir)/$(hdr)),, \
+ $(error Missing generated UAPI file $(gendir)/$(hdr)) \
+ ))
# Work out what needs to be removed
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
@@ -78,9 +67,8 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(input-files1-name); \
- $(CONFIG_SHELL) $< $(installdir) $(oldsrcdir) $(input-files2-name); \
- $(CONFIG_SHELL) $< $(installdir) $(gendir) $(input-files3-name); \
+ $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-y); \
+ $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-y); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
@@ -106,7 +94,9 @@ __headersinst: $(subdirs) $(install-file)
@:
targets += $(install-file)
-$(install-file): scripts/headers_install.sh $(input-files1) $(input-files2) $(input-files3) FORCE
+$(install-file): scripts/headers_install.sh \
+ $(addprefix $(srcdir)/,$(header-y)) \
+ $(addprefix $(gendir)/,$(genhdr-y)) FORCE
$(if $(unwanted),$(call cmd,remove),)
$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
$(call if_changed,install)
--
2.8.1
This patch prepares the uapi export by fixing the following errors:
.../linux/btrfs_tree.h:283:2: error: #error "UUID items require BTRFS_UUID_SIZE == 16!"
#error "UUID items require BTRFS_UUID_SIZE == 16!"
.../linux/btrfs_tree.h:390:12: error: ‘BTRFS_UUID_SIZE’ undeclared here (not in a function)
__u8 uuid[BTRFS_UUID_SIZE];
^
.../linux/btrfs_tree.h:796:16: error: ‘BTRFS_DEV_STAT_VALUES_MAX’ undeclared here (not in a function)
__le64 values[BTRFS_DEV_STAT_VALUES_MAX];
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/uapi/linux/btrfs_tree.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
index 6a261cb52d95..10689e1fdf11 100644
--- a/include/uapi/linux/btrfs_tree.h
+++ b/include/uapi/linux/btrfs_tree.h
@@ -1,6 +1,7 @@
#ifndef _BTRFS_CTREE_H_
#define _BTRFS_CTREE_H_
+#include <linux/btrfs.h>
#include <linux/types.h>
/*
--
2.8.1
This option was added in commit c7bb349e7c25 ("kbuild: introduce destination-y
for exported headers") but never used in-tree.
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Paul Bolle <[email protected]>
---
Documentation/kbuild/makefiles.txt | 23 ++++-------------------
scripts/Makefile.headersinst | 2 +-
2 files changed, 5 insertions(+), 20 deletions(-)
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 9b9c4797fc55..37b525d329ae 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -46,9 +46,8 @@ This document describes the Linux kernel Makefiles.
=== 7 Kbuild syntax for exported headers
--- 7.1 header-y
--- 7.2 genhdr-y
- --- 7.3 destination-y
- --- 7.4 generic-y
- --- 7.5 generated-y
+ --- 7.3 generic-y
+ --- 7.4 generated-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1295,21 +1294,7 @@ See subsequent chapter for the syntax of the Kbuild file.
#include/linux/Kbuild
genhdr-y += version.h
- --- 7.3 destination-y
-
- When an architecture has a set of exported headers that needs to be
- exported to a different directory destination-y is used.
- destination-y specifies the destination directory for all exported
- headers in the file where it is present.
-
- Example:
- #arch/xtensa/platforms/s6105/include/platform/Kbuild
- destination-y := include/linux
-
- In the example above all exported headers in the Kbuild file
- will be located in the directory "include/linux" when exported.
-
- --- 7.4 generic-y
+ --- 7.3 generic-y
If an architecture uses a verbatim copy of a header from
include/asm-generic then this is listed in the file
@@ -1336,7 +1321,7 @@ See subsequent chapter for the syntax of the Kbuild file.
Example: termios.h
#include <asm-generic/termios.h>
- --- 7.5 generated-y
+ --- 7.4 generated-y
If an architecture generates other header files alongside generic-y
wrappers, and not included in genhdr-y, then generated-y specifies
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 7bd9df6efe2f..ca5d439c9abf 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -14,7 +14,7 @@ kbuild-file := $(srctree)/$(obj)/Kbuild
include $(kbuild-file)
# called may set destination dir (when installing to asm/)
-_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))
+_dst := $(if $(dst),$(dst),$(obj))
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
--
2.8.1
This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.
The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.
Note that only cris and tile have more directories than only asm:
- arch-v[10|32] for cris;
- arch for tile.
Signed-off-by: Nicolas Dichtel <[email protected]>
---
Documentation/kbuild/makefiles.txt | 15 +--------------
Makefile | 6 +++---
arch/cris/include/uapi/asm/Kbuild | 3 ---
arch/tile/include/uapi/asm/Kbuild | 2 --
scripts/Makefile.headersinst | 3 +--
5 files changed, 5 insertions(+), 24 deletions(-)
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index b9f7ca4e62ae..e18daca65ccd 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -49,7 +49,6 @@ This document describes the Linux kernel Makefiles.
--- 7.3 generic-y
--- 7.4 generated-y
--- 7.5 mandatory-y
- --- 7.6 subdir-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1265,7 +1264,7 @@ The pre-processing does:
- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
All headers under include/uapi/, include/generated/uapi/,
-arch/<arch>/include/uapi/asm/ and arch/<arch>/include/generated/uapi/asm/
+arch/<arch>/include/uapi/ and arch/<arch>/include/generated/uapi/
are exported.
A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
@@ -1338,18 +1337,6 @@ See subsequent chapter for the syntax of the Kbuild file.
The convention is to list one subdir per line and
preferably in alphabetic order.
- --- 7.6 subdir-y
-
- subdir-y may be used to specify a subdirectory to be exported.
-
- Example:
- #arch/cris/include/uapi/asm/Kbuild
- subdir-y += ../arch-v10/arch/
- subdir-y += ../arch-v32/arch/
-
- The convention is to list one subdir per line and
- preferably in alphabetic order.
-
=== 8 Kbuild Variables
The top Makefile exports the following variables:
diff --git a/Makefile b/Makefile
index 6ea27d9f1384..50547481ed5a 100644
--- a/Makefile
+++ b/Makefile
@@ -1131,7 +1131,7 @@ firmware_install:
export INSTALL_HDR_PATH = $(objtree)/usr
# If we do an all arch process set dst to asm-$(hdr-arch)
-hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(hdr-arch), dst=include)
PHONY += archheaders
archheaders:
@@ -1152,7 +1152,7 @@ headers_install: __headers
$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
$(error Headers not exportable for the $(SRCARCH) architecture))
$(Q)$(MAKE) $(hdr-inst)=include/uapi
- $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst)
PHONY += headers_check_all
headers_check_all: headers_install_all
@@ -1161,7 +1161,7 @@ headers_check_all: headers_install_all
PHONY += headers_check
headers_check: headers_install
$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
- $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/ $(hdr-dst) HDRCHECK=1
# ---------------------------------------------------------------------------
# Kernel selftest
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
index d0c5471856e0..b15bf6bc0e94 100644
--- a/arch/cris/include/uapi/asm/Kbuild
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -1,5 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-subdir-y += ../arch-v10/arch/
-subdir-y += ../arch-v32/arch/
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index e0a50111e07f..0c74c3c5ebfa 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -2,5 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += ucontext.h
-
-subdir-y += ../arch
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 20be1fbc19cc..6ba97a1f9c5a 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -2,7 +2,7 @@
# Installing headers
#
# All headers under include/uapi, include/generated/uapi,
-# arch/<arch>/include/uapi/asm and arch/<arch>/include/generated/uapi/asm are
+# arch/<arch>/include/uapi and arch/<arch>/include/generated/uapi are
# exported.
# They are preprocessed to remove __KERNEL__ section of the file.
#
@@ -30,7 +30,6 @@ installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
-subdirs += $(subdir-y)
header-files := $(notdir $(wildcard $(srcdir)/*.h))
header-files += $(notdir $(wildcard $(srcdir)/*.agh))
header-files := $(filter-out $(no-export-headers), $(header-files))
--
2.8.1
This header file is exported, but from a userland pov, it's just a wrapper
to asm-generic/setup.h.
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: Tobias Klauser <[email protected]>
---
arch/nios2/include/uapi/asm/Kbuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
index e0bb972a50d7..69c965304146 100644
--- a/arch/nios2/include/uapi/asm/Kbuild
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -2,4 +2,5 @@ include include/uapi/asm-generic/Kbuild.asm
header-y += elf.h
+generic-y += setup.h
generic-y += ucontext.h
--
2.8.1
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.
In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.
After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-avr32/kvm_para.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/crypto.h
linux/cryptouser.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/userio.h
linux/virtio_mmio.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h
Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).
Thanks to Julien Floret <[email protected]> for the tip to get all
subdirs with a pure makefile command.
For the record, note that exported files for asm directories are a mix of
files listed by:
- include/uapi/asm-generic/Kbuild.asm;
- arch/<arch>/include/uapi/asm/Kbuild;
- arch/<arch>/include/asm/Kbuild.
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Acked-by: Russell King <[email protected]>
Acked-by: Mark Salter <[email protected]>
Acked-by: Michael Ellerman <[email protected]> (powerpc)
---
Documentation/kbuild/makefiles.txt | 66 ++--
arch/alpha/include/uapi/asm/Kbuild | 41 ---
arch/arc/include/uapi/asm/Kbuild | 3 -
arch/arm/include/uapi/asm/Kbuild | 17 -
arch/arm64/include/uapi/asm/Kbuild | 18 -
arch/avr32/include/uapi/asm/Kbuild | 20 --
arch/blackfin/include/uapi/asm/Kbuild | 17 -
arch/c6x/include/uapi/asm/Kbuild | 8 -
arch/cris/include/uapi/arch-v10/arch/Kbuild | 5 -
arch/cris/include/uapi/arch-v32/arch/Kbuild | 3 -
arch/cris/include/uapi/asm/Kbuild | 43 +--
arch/frv/include/uapi/asm/Kbuild | 33 --
arch/h8300/include/uapi/asm/Kbuild | 28 --
arch/hexagon/include/asm/Kbuild | 3 -
arch/hexagon/include/uapi/asm/Kbuild | 13 -
arch/ia64/include/uapi/asm/Kbuild | 45 ---
arch/m32r/include/uapi/asm/Kbuild | 31 --
arch/m68k/include/uapi/asm/Kbuild | 24 --
arch/metag/include/uapi/asm/Kbuild | 8 -
arch/microblaze/include/uapi/asm/Kbuild | 32 --
arch/mips/include/uapi/asm/Kbuild | 37 ---
arch/mn10300/include/uapi/asm/Kbuild | 32 --
arch/nios2/include/uapi/asm/Kbuild | 3 +-
arch/openrisc/include/asm/Kbuild | 3 -
arch/openrisc/include/uapi/asm/Kbuild | 8 -
arch/parisc/include/uapi/asm/Kbuild | 28 --
arch/powerpc/include/uapi/asm/Kbuild | 45 ---
arch/s390/include/uapi/asm/Kbuild | 53 ---
arch/score/include/asm/Kbuild | 3 -
arch/score/include/uapi/asm/Kbuild | 32 --
arch/sh/include/uapi/asm/Kbuild | 23 --
arch/sparc/include/uapi/asm/Kbuild | 48 ---
arch/tile/include/asm/Kbuild | 3 -
arch/tile/include/uapi/arch/Kbuild | 17 -
arch/tile/include/uapi/asm/Kbuild | 19 +-
arch/unicore32/include/uapi/asm/Kbuild | 6 -
arch/x86/include/uapi/asm/Kbuild | 58 ----
arch/xtensa/include/uapi/asm/Kbuild | 23 --
include/Kbuild | 2 -
include/asm-generic/Kbuild.asm | 1 -
include/scsi/fc/Kbuild | 0
include/uapi/Kbuild | 15 -
include/uapi/asm-generic/Kbuild | 36 --
include/uapi/asm-generic/Kbuild.asm | 76 ++---
include/uapi/drm/Kbuild | 23 --
include/uapi/linux/Kbuild | 491 +---------------------------
include/uapi/linux/android/Kbuild | 2 -
include/uapi/linux/byteorder/Kbuild | 3 -
include/uapi/linux/caif/Kbuild | 3 -
include/uapi/linux/can/Kbuild | 6 -
include/uapi/linux/dvb/Kbuild | 9 -
include/uapi/linux/hdlc/Kbuild | 2 -
include/uapi/linux/hsi/Kbuild | 2 -
include/uapi/linux/iio/Kbuild | 3 -
include/uapi/linux/isdn/Kbuild | 2 -
include/uapi/linux/mmc/Kbuild | 2 -
include/uapi/linux/netfilter/Kbuild | 89 -----
include/uapi/linux/netfilter/ipset/Kbuild | 5 -
include/uapi/linux/netfilter_arp/Kbuild | 3 -
include/uapi/linux/netfilter_bridge/Kbuild | 18 -
include/uapi/linux/netfilter_ipv4/Kbuild | 10 -
include/uapi/linux/netfilter_ipv6/Kbuild | 13 -
include/uapi/linux/nfsd/Kbuild | 6 -
include/uapi/linux/raid/Kbuild | 3 -
include/uapi/linux/spi/Kbuild | 2 -
include/uapi/linux/sunrpc/Kbuild | 2 -
include/uapi/linux/tc_act/Kbuild | 16 -
include/uapi/linux/tc_ematch/Kbuild | 5 -
include/uapi/linux/usb/Kbuild | 12 -
include/uapi/linux/wimax/Kbuild | 2 -
include/uapi/misc/Kbuild | 2 -
include/uapi/mtd/Kbuild | 6 -
include/uapi/rdma/Kbuild | 20 --
include/uapi/rdma/hfi/Kbuild | 3 -
include/uapi/scsi/Kbuild | 6 -
include/uapi/scsi/fc/Kbuild | 5 -
include/uapi/sound/Kbuild | 16 -
include/uapi/video/Kbuild | 4 -
include/uapi/xen/Kbuild | 5 -
include/video/Kbuild | 0
scripts/Makefile.headersinst | 55 ++--
81 files changed, 111 insertions(+), 1774 deletions(-)
delete mode 100644 arch/cris/include/uapi/arch-v10/arch/Kbuild
delete mode 100644 arch/cris/include/uapi/arch-v32/arch/Kbuild
delete mode 100644 arch/tile/include/uapi/arch/Kbuild
delete mode 100644 include/Kbuild
delete mode 100644 include/asm-generic/Kbuild.asm
delete mode 100644 include/scsi/fc/Kbuild
delete mode 100644 include/uapi/Kbuild
delete mode 100644 include/uapi/asm-generic/Kbuild
delete mode 100644 include/uapi/drm/Kbuild
delete mode 100644 include/uapi/linux/android/Kbuild
delete mode 100644 include/uapi/linux/byteorder/Kbuild
delete mode 100644 include/uapi/linux/caif/Kbuild
delete mode 100644 include/uapi/linux/can/Kbuild
delete mode 100644 include/uapi/linux/dvb/Kbuild
delete mode 100644 include/uapi/linux/hdlc/Kbuild
delete mode 100644 include/uapi/linux/hsi/Kbuild
delete mode 100644 include/uapi/linux/iio/Kbuild
delete mode 100644 include/uapi/linux/isdn/Kbuild
delete mode 100644 include/uapi/linux/mmc/Kbuild
delete mode 100644 include/uapi/linux/netfilter/Kbuild
delete mode 100644 include/uapi/linux/netfilter/ipset/Kbuild
delete mode 100644 include/uapi/linux/netfilter_arp/Kbuild
delete mode 100644 include/uapi/linux/netfilter_bridge/Kbuild
delete mode 100644 include/uapi/linux/netfilter_ipv4/Kbuild
delete mode 100644 include/uapi/linux/netfilter_ipv6/Kbuild
delete mode 100644 include/uapi/linux/nfsd/Kbuild
delete mode 100644 include/uapi/linux/raid/Kbuild
delete mode 100644 include/uapi/linux/spi/Kbuild
delete mode 100644 include/uapi/linux/sunrpc/Kbuild
delete mode 100644 include/uapi/linux/tc_act/Kbuild
delete mode 100644 include/uapi/linux/tc_ematch/Kbuild
delete mode 100644 include/uapi/linux/usb/Kbuild
delete mode 100644 include/uapi/linux/wimax/Kbuild
delete mode 100644 include/uapi/misc/Kbuild
delete mode 100644 include/uapi/mtd/Kbuild
delete mode 100644 include/uapi/rdma/Kbuild
delete mode 100644 include/uapi/rdma/hfi/Kbuild
delete mode 100644 include/uapi/scsi/Kbuild
delete mode 100644 include/uapi/scsi/fc/Kbuild
delete mode 100644 include/uapi/sound/Kbuild
delete mode 100644 include/uapi/video/Kbuild
delete mode 100644 include/uapi/xen/Kbuild
delete mode 100644 include/video/Kbuild
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 37b525d329ae..b9f7ca4e62ae 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -44,10 +44,12 @@ This document describes the Linux kernel Makefiles.
--- 6.11 Post-link pass
=== 7 Kbuild syntax for exported headers
- --- 7.1 header-y
+ --- 7.1 no-export-headers
--- 7.2 genhdr-y
--- 7.3 generic-y
--- 7.4 generated-y
+ --- 7.5 mandatory-y
+ --- 7.6 subdir-y
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -1235,7 +1237,7 @@ When kbuild executes, the following steps are followed (roughly):
that may be shared between individual architectures.
The recommended approach how to use a generic header file is
to list the file in the Kbuild file.
- See "7.4 generic-y" for further info on syntax etc.
+ See "7.3 generic-y" for further info on syntax etc.
--- 6.11 Post-link pass
@@ -1262,37 +1264,30 @@ The pre-processing does:
- drop include of compiler.h
- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
-Each relevant directory contains a file name "Kbuild" which specifies the
-headers to be exported.
-See subsequent chapter for the syntax of the Kbuild file.
-
- --- 7.1 header-y
-
- header-y specifies header files to be exported.
-
- Example:
- #include/linux/Kbuild
- header-y += usb/
- header-y += aio_abi.h
+All headers under include/uapi/, include/generated/uapi/,
+arch/<arch>/include/uapi/asm/ and arch/<arch>/include/generated/uapi/asm/
+are exported.
- The convention is to list one file per line and
- preferably in alphabetic order.
+A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
+arch/<arch>/include/asm/ to list asm files coming from asm-generic.
+See subsequent chapter for the syntax of the Kbuild file.
- header-y also specifies which subdirectories to visit.
- A subdirectory is identified by a trailing '/' which
- can be seen in the example above for the usb subdirectory.
+ --- 7.1 no-export-headers
- Subdirectories are visited before their parent directories.
+ no-export-headers is essentially used by include/uapi/linux/Kbuild to
+ avoid exporting specific headers (e.g. kvm.h) on architectures that do
+ not support it. It should be avoided as much as possible.
--- 7.2 genhdr-y
- genhdr-y specifies generated files to be exported.
- Generated files are special as they need to be looked
- up in another directory when doing 'make O=...' builds.
+ genhdr-y specifies asm files to be generated.
Example:
- #include/linux/Kbuild
- genhdr-y += version.h
+ #arch/x86/include/uapi/asm/Kbuild
+ genhdr-y += unistd_32.h
+ genhdr-y += unistd_64.h
+ genhdr-y += unistd_x32.h
+
--- 7.3 generic-y
@@ -1334,6 +1329,27 @@ See subsequent chapter for the syntax of the Kbuild file.
#arch/x86/include/asm/Kbuild
generated-y += syscalls_32.h
+ --- 7.5 mandatory-y
+
+ mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm
+ to define the minimun set of headers that must be exported in
+ include/asm.
+
+ The convention is to list one subdir per line and
+ preferably in alphabetic order.
+
+ --- 7.6 subdir-y
+
+ subdir-y may be used to specify a subdirectory to be exported.
+
+ Example:
+ #arch/cris/include/uapi/asm/Kbuild
+ subdir-y += ../arch-v10/arch/
+ subdir-y += ../arch-v32/arch/
+
+ The convention is to list one subdir per line and
+ preferably in alphabetic order.
+
=== 8 Kbuild Variables
The top Makefile exports the following variables:
diff --git a/arch/alpha/include/uapi/asm/Kbuild b/arch/alpha/include/uapi/asm/Kbuild
index d96f2ef5b639..b15bf6bc0e94 100644
--- a/arch/alpha/include/uapi/asm/Kbuild
+++ b/arch/alpha/include/uapi/asm/Kbuild
@@ -1,43 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += a.out.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += compiler.h
-header-y += console.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += fpu.h
-header-y += gentrap.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += pal.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += reg.h
-header-y += regdef.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sysinfo.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
index f50d02df78d5..b15bf6bc0e94 100644
--- a/arch/arc/include/uapi/asm/Kbuild
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -1,5 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += elf.h
-header-y += page.h
-header-y += cachectl.h
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 46a76cd6acb6..607f702c2d62 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -1,23 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += fcntl.h
-header-y += hwcap.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += perf_regs.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += unistd.h
genhdr-y += unistd-common.h
genhdr-y += unistd-oabi.h
genhdr-y += unistd-eabi.h
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
index 825b0fe51c2b..13a97aa2285f 100644
--- a/arch/arm64/include/uapi/asm/Kbuild
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -2,21 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += fcntl.h
-header-y += hwcap.h
-header-y += kvm_para.h
-header-y += perf_regs.h
-header-y += param.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += statfs.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild
index 08d8a3d76ea8..610395083364 100644
--- a/arch/avr32/include/uapi/asm/Kbuild
+++ b/arch/avr32/include/uapi/asm/Kbuild
@@ -1,26 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
generic-y += bitsperlong.h
generic-y += errno.h
generic-y += fcntl.h
diff --git a/arch/blackfin/include/uapi/asm/Kbuild b/arch/blackfin/include/uapi/asm/Kbuild
index 0bd28f77abc3..b15bf6bc0e94 100644
--- a/arch/blackfin/include/uapi/asm/Kbuild
+++ b/arch/blackfin/include/uapi/asm/Kbuild
@@ -1,19 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += bfin_sport.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += fcntl.h
-header-y += fixed_code.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
index e9bc2b2b8147..13a97aa2285f 100644
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -2,11 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/cris/include/uapi/arch-v10/arch/Kbuild b/arch/cris/include/uapi/arch-v10/arch/Kbuild
deleted file mode 100644
index 9048c87a782b..000000000000
--- a/arch/cris/include/uapi/arch-v10/arch/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += sv_addr.agh
-header-y += sv_addr_ag.h
-header-y += svinto.h
-header-y += user.h
diff --git a/arch/cris/include/uapi/arch-v32/arch/Kbuild b/arch/cris/include/uapi/arch-v32/arch/Kbuild
deleted file mode 100644
index 59efffd16b61..000000000000
--- a/arch/cris/include/uapi/arch-v32/arch/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += cryptocop.h
-header-y += user.h
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
index d5564a0ae66a..d0c5471856e0 100644
--- a/arch/cris/include/uapi/asm/Kbuild
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -1,44 +1,5 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += ../arch-v10/arch/
-header-y += ../arch-v32/arch/
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += elf.h
-header-y += elf_v10.h
-header-y += elf_v32.h
-header-y += errno.h
-header-y += ethernet.h
-header-y += etraxgpio.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += ptrace_v10.h
-header-y += ptrace_v32.h
-header-y += resource.h
-header-y += rs485.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sync_serial.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
+subdir-y += ../arch-v10/arch/
+subdir-y += ../arch-v32/arch/
diff --git a/arch/frv/include/uapi/asm/Kbuild b/arch/frv/include/uapi/asm/Kbuild
index 42a2b33461c0..b15bf6bc0e94 100644
--- a/arch/frv/include/uapi/asm/Kbuild
+++ b/arch/frv/include/uapi/asm/Kbuild
@@ -1,35 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += registers.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
index fb6101a5d4f1..b15bf6bc0e94 100644
--- a/arch/h8300/include/uapi/asm/Kbuild
+++ b/arch/h8300/include/uapi/asm/Kbuild
@@ -1,30 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += siginfo.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index 797b64a4b80b..65f48073f8ac 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ucontext.h
-
generic-y += auxvec.h
generic-y += barrier.h
generic-y += bug.h
diff --git a/arch/hexagon/include/uapi/asm/Kbuild b/arch/hexagon/include/uapi/asm/Kbuild
index c31706c38631..b15bf6bc0e94 100644
--- a/arch/hexagon/include/uapi/asm/Kbuild
+++ b/arch/hexagon/include/uapi/asm/Kbuild
@@ -1,15 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += param.h
-header-y += ptrace.h
-header-y += registers.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += swab.h
-header-y += unistd.h
-header-y += user.h
diff --git a/arch/ia64/include/uapi/asm/Kbuild b/arch/ia64/include/uapi/asm/Kbuild
index 891002bbb995..13a97aa2285f 100644
--- a/arch/ia64/include/uapi/asm/Kbuild
+++ b/arch/ia64/include/uapi/asm/Kbuild
@@ -2,48 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += break.h
-header-y += byteorder.h
-header-y += cmpxchg.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += fpu.h
-header-y += gcc_intrin.h
-header-y += ia64regs.h
-header-y += intel_intrin.h
-header-y += intrinsics.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += perfmon.h
-header-y += perfmon_default_smpl.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += ptrace_offsets.h
-header-y += resource.h
-header-y += rse.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += ustack.h
diff --git a/arch/m32r/include/uapi/asm/Kbuild b/arch/m32r/include/uapi/asm/Kbuild
index 43937a61d6cf..b15bf6bc0e94 100644
--- a/arch/m32r/include/uapi/asm/Kbuild
+++ b/arch/m32r/include/uapi/asm/Kbuild
@@ -1,33 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild
index 6a2d257bdfb2..64368077235a 100644
--- a/arch/m68k/include/uapi/asm/Kbuild
+++ b/arch/m68k/include/uapi/asm/Kbuild
@@ -9,27 +9,3 @@ generic-y += socket.h
generic-y += sockios.h
generic-y += termbits.h
generic-y += termios.h
-
-header-y += a.out.h
-header-y += bootinfo.h
-header-y += bootinfo-amiga.h
-header-y += bootinfo-apollo.h
-header-y += bootinfo-atari.h
-header-y += bootinfo-hp300.h
-header-y += bootinfo-mac.h
-header-y += bootinfo-q40.h
-header-y += bootinfo-vme.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += fcntl.h
-header-y += ioctls.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += unistd.h
diff --git a/arch/metag/include/uapi/asm/Kbuild b/arch/metag/include/uapi/asm/Kbuild
index ab78be2b6eb0..b29731ebd7a9 100644
--- a/arch/metag/include/uapi/asm/Kbuild
+++ b/arch/metag/include/uapi/asm/Kbuild
@@ -1,14 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += byteorder.h
-header-y += ech.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += swab.h
-header-y += unistd.h
-
generic-y += mman.h
generic-y += resource.h
generic-y += setup.h
diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild
index 1aac99f87df1..2178c78c7c1a 100644
--- a/arch/microblaze/include/uapi/asm/Kbuild
+++ b/arch/microblaze/include/uapi/asm/Kbuild
@@ -2,35 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += types.h
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += elf.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += unistd.h
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
index f2cf41461146..a0266feba9e6 100644
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -2,40 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += ipcbuf.h
-
-header-y += auxvec.h
-header-y += bitfield.h
-header-y += bitsperlong.h
-header-y += break.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += inst.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += sgidefs.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += sysmips.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/mn10300/include/uapi/asm/Kbuild b/arch/mn10300/include/uapi/asm/Kbuild
index 040178cdb3eb..b15bf6bc0e94 100644
--- a/arch/mn10300/include/uapi/asm/Kbuild
+++ b/arch/mn10300/include/uapi/asm/Kbuild
@@ -1,34 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
index 69c965304146..374bd123329f 100644
--- a/arch/nios2/include/uapi/asm/Kbuild
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -1,6 +1,5 @@
+# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += elf.h
-
generic-y += setup.h
generic-y += ucontext.h
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index fb01873a5aad..1b533a107f19 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ucontext.h
-
generic-y += auxvec.h
generic-y += barrier.h
generic-y += bitsperlong.h
diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild
index 80761eb82b5f..b15bf6bc0e94 100644
--- a/arch/openrisc/include/uapi/asm/Kbuild
+++ b/arch/openrisc/include/uapi/asm/Kbuild
@@ -1,10 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += byteorder.h
-header-y += elf.h
-header-y += kvm_para.h
-header-y += param.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += unistd.h
diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild
index 348356c99514..3971c60a7e7f 100644
--- a/arch/parisc/include/uapi/asm/Kbuild
+++ b/arch/parisc/include/uapi/asm/Kbuild
@@ -2,31 +2,3 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += resource.h
-
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += pdc.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index dab3717e3ea0..b15bf6bc0e94 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -1,47 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += bootx.h
-header-y += byteorder.h
-header-y += cputable.h
-header-y += eeh.h
-header-y += elf.h
-header-y += epapr_hcalls.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += nvram.h
-header-y += opal-prd.h
-header-y += param.h
-header-y += perf_event.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ps3fb.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += spu_info.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += tm.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild
index 6848ba5c1454..b15bf6bc0e94 100644
--- a/arch/s390/include/uapi/asm/Kbuild
+++ b/arch/s390/include/uapi/asm/Kbuild
@@ -1,55 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += chpid.h
-header-y += chsc.h
-header-y += clp.h
-header-y += cmb.h
-header-y += dasd.h
-header-y += debug.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += hypfs.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += kvm_perf.h
-header-y += kvm_virtio.h
-header-y += mman.h
-header-y += monwriter.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += pkey.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += qeth.h
-header-y += resource.h
-header-y += schid.h
-header-y += sclp_ctl.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sie.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += tape390.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += virtio-ccw.h
-header-y += vtoc.h
-header-y += zcrypt.h
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
index 926943a49ea5..4ee7fc77d23c 100644
--- a/arch/score/include/asm/Kbuild
+++ b/arch/score/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y +=
-
generic-y += barrier.h
generic-y += clkdev.h
generic-y += current.h
diff --git a/arch/score/include/uapi/asm/Kbuild b/arch/score/include/uapi/asm/Kbuild
index 040178cdb3eb..b15bf6bc0e94 100644
--- a/arch/score/include/uapi/asm/Kbuild
+++ b/arch/score/include/uapi/asm/Kbuild
@@ -1,34 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
index 60613ae78513..b15bf6bc0e94 100644
--- a/arch/sh/include/uapi/asm/Kbuild
+++ b/arch/sh/include/uapi/asm/Kbuild
@@ -1,25 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += cpu-features.h
-header-y += hw_breakpoint.h
-header-y += ioctls.h
-header-y += posix_types.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += ptrace.h
-header-y += ptrace_32.h
-header-y += ptrace_64.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += types.h
-header-y += unistd.h
-header-y += unistd_32.h
-header-y += unistd_64.h
diff --git a/arch/sparc/include/uapi/asm/Kbuild b/arch/sparc/include/uapi/asm/Kbuild
index b5843ee09fb5..b15bf6bc0e94 100644
--- a/arch/sparc/include/uapi/asm/Kbuild
+++ b/arch/sparc/include/uapi/asm/Kbuild
@@ -1,50 +1,2 @@
# UAPI Header export list
-# User exported sparc header files
-
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += apc.h
-header-y += asi.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += display7seg.h
-header-y += envctrl.h
-header-y += errno.h
-header-y += fbio.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += jsflash.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += openpromio.h
-header-y += param.h
-header-y += perfctr.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += psr.h
-header-y += psrcompat.h
-header-y += pstate.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += traps.h
-header-y += uctx.h
-header-y += unistd.h
-header-y += utrap.h
-header-y += watchdog.h
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index aa48b6eaff2d..61157a7e8532 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -1,6 +1,3 @@
-
-header-y += ../arch/
-
generic-y += bug.h
generic-y += bugs.h
generic-y += clkdev.h
diff --git a/arch/tile/include/uapi/arch/Kbuild b/arch/tile/include/uapi/arch/Kbuild
deleted file mode 100644
index 97dfbecec6b6..000000000000
--- a/arch/tile/include/uapi/arch/Kbuild
+++ /dev/null
@@ -1,17 +0,0 @@
-# UAPI Header export list
-header-y += abi.h
-header-y += chip.h
-header-y += chip_tilegx.h
-header-y += chip_tilepro.h
-header-y += icache.h
-header-y += interrupts.h
-header-y += interrupts_32.h
-header-y += interrupts_64.h
-header-y += opcode.h
-header-y += opcode_tilegx.h
-header-y += opcode_tilepro.h
-header-y += sim.h
-header-y += sim_def.h
-header-y += spr_def.h
-header-y += spr_def_32.h
-header-y += spr_def_64.h
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index c20db8e428bf..e0a50111e07f 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -1,21 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += cachectl.h
-header-y += hardwall.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += ptrace.h
-header-y += setup.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += stat.h
-header-y += swab.h
-header-y += ucontext.h
-header-y += unistd.h
-
generic-y += ucontext.h
+
+subdir-y += ../arch
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
index 0514d7ad6855..13a97aa2285f 100644
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ b/arch/unicore32/include/uapi/asm/Kbuild
@@ -1,10 +1,4 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-header-y += byteorder.h
-header-y += kvm_para.h
-header-y += ptrace.h
-header-y += sigcontext.h
-header-y += unistd.h
-
generic-y += kvm_para.h
diff --git a/arch/x86/include/uapi/asm/Kbuild b/arch/x86/include/uapi/asm/Kbuild
index 1c532b3f18ea..83b6e9a0dce4 100644
--- a/arch/x86/include/uapi/asm/Kbuild
+++ b/arch/x86/include/uapi/asm/Kbuild
@@ -4,61 +4,3 @@ include include/uapi/asm-generic/Kbuild.asm
genhdr-y += unistd_32.h
genhdr-y += unistd_64.h
genhdr-y += unistd_x32.h
-header-y += a.out.h
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += boot.h
-header-y += bootparam.h
-header-y += byteorder.h
-header-y += debugreg.h
-header-y += e820.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += hw_breakpoint.h
-header-y += hyperv.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += ist.h
-header-y += kvm.h
-header-y += kvm_para.h
-header-y += kvm_perf.h
-header-y += ldt.h
-header-y += mce.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += msr.h
-header-y += mtrr.h
-header-y += param.h
-header-y += perf_regs.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += posix_types_x32.h
-header-y += prctl.h
-header-y += processor-flags.h
-header-y += ptrace-abi.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += sigcontext32.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += svm.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
-header-y += vm86.h
-header-y += vmx.h
-header-y += vsyscall.h
diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild
index 56aad54e7fb7..b15bf6bc0e94 100644
--- a/arch/xtensa/include/uapi/asm/Kbuild
+++ b/arch/xtensa/include/uapi/asm/Kbuild
@@ -1,25 +1,2 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += byteorder.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += swab.h
-header-y += termbits.h
-header-y += types.h
-header-y += unistd.h
diff --git a/include/Kbuild b/include/Kbuild
deleted file mode 100644
index bab1145bc7a7..000000000000
--- a/include/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# Top-level Makefile calls into asm-$(ARCH)
-# List only non-arch directories below
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
deleted file mode 100644
index d2ee86b4c091..000000000000
--- a/include/asm-generic/Kbuild.asm
+++ /dev/null
@@ -1 +0,0 @@
-include include/uapi/asm-generic/Kbuild.asm
diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/include/uapi/Kbuild b/include/uapi/Kbuild
deleted file mode 100644
index 245aa6e05e6a..000000000000
--- a/include/uapi/Kbuild
+++ /dev/null
@@ -1,15 +0,0 @@
-# UAPI Header export list
-# Top-level Makefile calls into asm-$(ARCH)
-# List only non-arch directories below
-
-
-header-y += asm-generic/
-header-y += linux/
-header-y += sound/
-header-y += mtd/
-header-y += rdma/
-header-y += video/
-header-y += drm/
-header-y += xen/
-header-y += scsi/
-header-y += misc/
diff --git a/include/uapi/asm-generic/Kbuild b/include/uapi/asm-generic/Kbuild
deleted file mode 100644
index b73de7bb7a62..000000000000
--- a/include/uapi/asm-generic/Kbuild
+++ /dev/null
@@ -1,36 +0,0 @@
-# UAPI Header export list
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += errno-base.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += int-l64.h
-header-y += int-ll64.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman-common.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += shmparam.h
-header-y += siginfo.h
-header-y += signal-defs.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
diff --git a/include/uapi/asm-generic/Kbuild.asm b/include/uapi/asm-generic/Kbuild.asm
index fcd50b759217..21381449d98a 100644
--- a/include/uapi/asm-generic/Kbuild.asm
+++ b/include/uapi/asm-generic/Kbuild.asm
@@ -1,49 +1,33 @@
#
-# Headers that are optional in usr/include/asm/
-#
-opt-header += kvm.h
-opt-header += kvm_para.h
-opt-header += a.out.h
-
-#
# Headers that are mandatory in usr/include/asm/
#
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
-
-header-y += $(foreach hdr,$(opt-header), \
- $(if \
- $(wildcard \
- $(srctree)/arch/$(SRCARCH)/include/uapi/asm/$(hdr) \
- $(srctree)/arch/$(SRCARCH)/include/asm/$(hdr) \
- ), \
- $(hdr) \
- ))
+mandatory-y += auxvec.h
+mandatory-y += bitsperlong.h
+mandatory-y += byteorder.h
+mandatory-y += errno.h
+mandatory-y += fcntl.h
+mandatory-y += ioctl.h
+mandatory-y += ioctls.h
+mandatory-y += ipcbuf.h
+mandatory-y += mman.h
+mandatory-y += msgbuf.h
+mandatory-y += param.h
+mandatory-y += poll.h
+mandatory-y += posix_types.h
+mandatory-y += ptrace.h
+mandatory-y += resource.h
+mandatory-y += sembuf.h
+mandatory-y += setup.h
+mandatory-y += shmbuf.h
+mandatory-y += sigcontext.h
+mandatory-y += siginfo.h
+mandatory-y += signal.h
+mandatory-y += socket.h
+mandatory-y += sockios.h
+mandatory-y += stat.h
+mandatory-y += statfs.h
+mandatory-y += swab.h
+mandatory-y += termbits.h
+mandatory-y += termios.h
+mandatory-y += types.h
+mandatory-y += unistd.h
diff --git a/include/uapi/drm/Kbuild b/include/uapi/drm/Kbuild
deleted file mode 100644
index c97addd08f8c..000000000000
--- a/include/uapi/drm/Kbuild
+++ /dev/null
@@ -1,23 +0,0 @@
-# UAPI Header export list
-header-y += drm.h
-header-y += drm_fourcc.h
-header-y += drm_mode.h
-header-y += drm_sarea.h
-header-y += amdgpu_drm.h
-header-y += exynos_drm.h
-header-y += i810_drm.h
-header-y += i915_drm.h
-header-y += mga_drm.h
-header-y += nouveau_drm.h
-header-y += omap_drm.h
-header-y += qxl_drm.h
-header-y += r128_drm.h
-header-y += radeon_drm.h
-header-y += savage_drm.h
-header-y += sis_drm.h
-header-y += tegra_drm.h
-header-y += via_drm.h
-header-y += vmwgfx_drm.h
-header-y += msm_drm.h
-header-y += vc4_drm.h
-header-y += virtgpu_drm.h
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index dd9820b1c779..ca2787d9bf0f 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -1,492 +1,13 @@
# UAPI Header export list
-header-y += android/
-header-y += byteorder/
-header-y += can/
-header-y += caif/
-header-y += dvb/
-header-y += hdlc/
-header-y += hsi/
-header-y += iio/
-header-y += isdn/
-header-y += mmc/
-header-y += nfsd/
-header-y += raid/
-header-y += spi/
-header-y += sunrpc/
-header-y += tc_act/
-header-y += tc_ematch/
-header-y += netfilter/
-header-y += netfilter_arp/
-header-y += netfilter_bridge/
-header-y += netfilter_ipv4/
-header-y += netfilter_ipv6/
-header-y += usb/
-header-y += wimax/
-genhdr-y += version.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
-header-y += a.out.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
+no-export-headers += a.out.h
endif
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += am437x-vpfe.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atm_eni.h
-header-y += atm.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atm_nicstar.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += audit.h
-header-y += auto_fs4.h
-header-y += auto_fs.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += batman_adv.h
-header-y += baycom.h
-header-y += bcm933xx_hcs.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += blkzoned.h
-header-y += bpf_common.h
-header-y += bpf_perf_event.h
-header-y += bpf.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += bt-bmc.h
-header-y += btrfs.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cec.h
-header-y += cec-funcs.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += devlink.h
-header-y += dlmconstants.h
-header-y += dlm_device.h
-header-y += dlm.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dma-buf.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elfcore.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fou.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += genetlink.h
-header-y += gen_stats.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += gpio.h
-header-y += gsmmux.h
-header-y += gtp.h
-header-y += hdlcdrv.h
-header-y += hdlc.h
-header-y += hdreg.h
-header-y += hiddev.h
-header-y += hid.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hsr_netlink.h
-header-y += hyperv.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_macsec.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += ife.h
-header-y += igmp.h
-header-y += ila.h
-header-y += in6.h
-header-y += inet_diag.h
-header-y += in.h
-header-y += inotify.h
-header-y += input.h
-header-y += input-event-codes.h
-header-y += in_route.h
-header-y += ioctl.h
-header-y += ip6_tunnel.h
-header-y += ipc.h
-header-y += ip.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ip_vs.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn_divertif.h
-header-y += isdn.h
-header-y += isdnif.h
-header-y += isdn_ppp.h
-header-y += iso_fs.h
-header-y += ivtvfb.h
-header-y += ivtv.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kcmp.h
-header-y += kdev_t.h
-header-y += kd.h
-header-y += kernelcapi.h
-header-y += kernel.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
-header-y += kvm.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),)
+no-export-headers += kvm.h
endif
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
- $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
-header-y += kvm_para.h
+ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
+no-export-headers += kvm_para.h
endif
-
-header-y += hw_breakpoint.h
-header-y += l2tp.h
-header-y += libc-compat.h
-header-y += lirc.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += lwtunnel.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += media-bus-format.h
-header-y += mei.h
-header-y += membarrier.h
-header-y += memfd.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mic_common.h
-header-y += mic_ioctl.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mpls.h
-header-y += mpls_iptunnel.h
-header-y += mqueue.h
-header-y += mroute6.h
-header-y += mroute.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += nbd.h
-header-y += ncp_fs.h
-header-y += ncp.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += ndctl.h
-header-y += neighbour.h
-header-y += netconf.h
-header-y += netdevice.h
-header-y += net_dropmon.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += net.h
-header-y += netlink_diag.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += net_namespace.h
-header-y += net_tstamp.h
-header-y += nfc.h
-header-y += psample.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfsacl.h
-header-y += nfs_fs.h
-header-y += nfs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nl80211.h
-header-y += n_r3964.h
-header-y += nubus.h
-header-y += nvme_ioctl.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += openvswitch.h
-header-y += packet_diag.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pktcdvd.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_acl.h
-header-y += posix_acl_xattr.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp_defs.h
-header-y += ppp-ioctl.h
-header-y += pps.h
-header-y += prctl.h
-header-y += psci.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += rio_cm_cdev.h
-header-y += rio_mport_cdev.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += scif_ioctl.h
-header-y += screen_info.h
-header-y += sctp.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += seg6_genl.h
-header-y += seg6.h
-header-y += seg6_hmac.h
-header-y += seg6_iptunnel.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial_core.h
-header-y += serial.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signalfd.h
-header-y += signal.h
-header-y += smiapp.h
-header-y += snmp.h
-header-y += sock_diag.h
-header-y += socket.h
-header-y += sockios.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += soundcard.h
-header-y += sound.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sync_file.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += target_core_user.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += thermal.h
-header-y += time.h
-header-y += timerfd.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc_config.h
-header-y += tipc_netlink.h
-header-y += tipc.h
-header-y += toshiba.h
-header-y += tty_flags.h
-header-y += tty.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += uleds.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += unix_diag.h
-header-y += usbdevice_fs.h
-header-y += usbip.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_gpu.h
-header-y += virtio_ids.h
-header-y += virtio_input.h
-header-y += virtio_mmio.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += virtio_scsi.h
-header-y += virtio_types.h
-header-y += virtio_vsock.h
-header-y += virtio_crypto.h
-header-y += vm_sockets.h
-header-y += vt.h
-header-y += vtpm_proxy.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
-header-y += xilinx-v4l2-controls.h
-header-y += zorro.h
-header-y += zorro_ids.h
-header-y += userfaultfd.h
diff --git a/include/uapi/linux/android/Kbuild b/include/uapi/linux/android/Kbuild
deleted file mode 100644
index ca011eec252a..000000000000
--- a/include/uapi/linux/android/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += binder.h
diff --git a/include/uapi/linux/byteorder/Kbuild b/include/uapi/linux/byteorder/Kbuild
deleted file mode 100644
index 619225b9ff2e..000000000000
--- a/include/uapi/linux/byteorder/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += big_endian.h
-header-y += little_endian.h
diff --git a/include/uapi/linux/caif/Kbuild b/include/uapi/linux/caif/Kbuild
deleted file mode 100644
index 43396612d3a3..000000000000
--- a/include/uapi/linux/caif/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += caif_socket.h
-header-y += if_caif.h
diff --git a/include/uapi/linux/can/Kbuild b/include/uapi/linux/can/Kbuild
deleted file mode 100644
index 21c91bf25a29..000000000000
--- a/include/uapi/linux/can/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += bcm.h
-header-y += error.h
-header-y += gw.h
-header-y += netlink.h
-header-y += raw.h
diff --git a/include/uapi/linux/dvb/Kbuild b/include/uapi/linux/dvb/Kbuild
deleted file mode 100644
index d40942cfc627..000000000000
--- a/include/uapi/linux/dvb/Kbuild
+++ /dev/null
@@ -1,9 +0,0 @@
-# UAPI Header export list
-header-y += audio.h
-header-y += ca.h
-header-y += dmx.h
-header-y += frontend.h
-header-y += net.h
-header-y += osd.h
-header-y += version.h
-header-y += video.h
diff --git a/include/uapi/linux/hdlc/Kbuild b/include/uapi/linux/hdlc/Kbuild
deleted file mode 100644
index 8c1d2cb75e33..000000000000
--- a/include/uapi/linux/hdlc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += ioctl.h
diff --git a/include/uapi/linux/hsi/Kbuild b/include/uapi/linux/hsi/Kbuild
deleted file mode 100644
index a16a00544258..000000000000
--- a/include/uapi/linux/hsi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += hsi_char.h cs-protocol.h
diff --git a/include/uapi/linux/iio/Kbuild b/include/uapi/linux/iio/Kbuild
deleted file mode 100644
index 86f76d84c44f..000000000000
--- a/include/uapi/linux/iio/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += events.h
-header-y += types.h
diff --git a/include/uapi/linux/isdn/Kbuild b/include/uapi/linux/isdn/Kbuild
deleted file mode 100644
index 89e52850bf29..000000000000
--- a/include/uapi/linux/isdn/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += capicmd.h
diff --git a/include/uapi/linux/mmc/Kbuild b/include/uapi/linux/mmc/Kbuild
deleted file mode 100644
index 8c1d2cb75e33..000000000000
--- a/include/uapi/linux/mmc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += ioctl.h
diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild
deleted file mode 100644
index 03f194aeadc5..000000000000
--- a/include/uapi/linux/netfilter/Kbuild
+++ /dev/null
@@ -1,89 +0,0 @@
-# UAPI Header export list
-header-y += ipset/
-header-y += nf_conntrack_common.h
-header-y += nf_conntrack_ftp.h
-header-y += nf_conntrack_sctp.h
-header-y += nf_conntrack_tcp.h
-header-y += nf_conntrack_tuple_common.h
-header-y += nf_log.h
-header-y += nf_tables.h
-header-y += nf_tables_compat.h
-header-y += nf_nat.h
-header-y += nfnetlink.h
-header-y += nfnetlink_acct.h
-header-y += nfnetlink_compat.h
-header-y += nfnetlink_conntrack.h
-header-y += nfnetlink_cthelper.h
-header-y += nfnetlink_cttimeout.h
-header-y += nfnetlink_log.h
-header-y += nfnetlink_queue.h
-header-y += x_tables.h
-header-y += xt_AUDIT.h
-header-y += xt_CHECKSUM.h
-header-y += xt_CLASSIFY.h
-header-y += xt_CONNMARK.h
-header-y += xt_CONNSECMARK.h
-header-y += xt_CT.h
-header-y += xt_DSCP.h
-header-y += xt_HMARK.h
-header-y += xt_IDLETIMER.h
-header-y += xt_LED.h
-header-y += xt_LOG.h
-header-y += xt_MARK.h
-header-y += xt_NFLOG.h
-header-y += xt_NFQUEUE.h
-header-y += xt_RATEEST.h
-header-y += xt_SECMARK.h
-header-y += xt_SYNPROXY.h
-header-y += xt_TCPMSS.h
-header-y += xt_TCPOPTSTRIP.h
-header-y += xt_TEE.h
-header-y += xt_TPROXY.h
-header-y += xt_addrtype.h
-header-y += xt_bpf.h
-header-y += xt_cgroup.h
-header-y += xt_cluster.h
-header-y += xt_comment.h
-header-y += xt_connbytes.h
-header-y += xt_connlabel.h
-header-y += xt_connlimit.h
-header-y += xt_connmark.h
-header-y += xt_conntrack.h
-header-y += xt_cpu.h
-header-y += xt_dccp.h
-header-y += xt_devgroup.h
-header-y += xt_dscp.h
-header-y += xt_ecn.h
-header-y += xt_esp.h
-header-y += xt_hashlimit.h
-header-y += xt_helper.h
-header-y += xt_ipcomp.h
-header-y += xt_iprange.h
-header-y += xt_ipvs.h
-header-y += xt_l2tp.h
-header-y += xt_length.h
-header-y += xt_limit.h
-header-y += xt_mac.h
-header-y += xt_mark.h
-header-y += xt_multiport.h
-header-y += xt_nfacct.h
-header-y += xt_osf.h
-header-y += xt_owner.h
-header-y += xt_physdev.h
-header-y += xt_pkttype.h
-header-y += xt_policy.h
-header-y += xt_quota.h
-header-y += xt_rateest.h
-header-y += xt_realm.h
-header-y += xt_recent.h
-header-y += xt_rpfilter.h
-header-y += xt_sctp.h
-header-y += xt_set.h
-header-y += xt_socket.h
-header-y += xt_state.h
-header-y += xt_statistic.h
-header-y += xt_string.h
-header-y += xt_tcpmss.h
-header-y += xt_tcpudp.h
-header-y += xt_time.h
-header-y += xt_u32.h
diff --git a/include/uapi/linux/netfilter/ipset/Kbuild b/include/uapi/linux/netfilter/ipset/Kbuild
deleted file mode 100644
index d2680423d9ab..000000000000
--- a/include/uapi/linux/netfilter/ipset/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += ip_set.h
-header-y += ip_set_bitmap.h
-header-y += ip_set_hash.h
-header-y += ip_set_list.h
diff --git a/include/uapi/linux/netfilter_arp/Kbuild b/include/uapi/linux/netfilter_arp/Kbuild
deleted file mode 100644
index 62d5637cc0ac..000000000000
--- a/include/uapi/linux/netfilter_arp/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += arp_tables.h
-header-y += arpt_mangle.h
diff --git a/include/uapi/linux/netfilter_bridge/Kbuild b/include/uapi/linux/netfilter_bridge/Kbuild
deleted file mode 100644
index 0fbad8ef96de..000000000000
--- a/include/uapi/linux/netfilter_bridge/Kbuild
+++ /dev/null
@@ -1,18 +0,0 @@
-# UAPI Header export list
-header-y += ebt_802_3.h
-header-y += ebt_among.h
-header-y += ebt_arp.h
-header-y += ebt_arpreply.h
-header-y += ebt_ip.h
-header-y += ebt_ip6.h
-header-y += ebt_limit.h
-header-y += ebt_log.h
-header-y += ebt_mark_m.h
-header-y += ebt_mark_t.h
-header-y += ebt_nat.h
-header-y += ebt_nflog.h
-header-y += ebt_pkttype.h
-header-y += ebt_redirect.h
-header-y += ebt_stp.h
-header-y += ebt_vlan.h
-header-y += ebtables.h
diff --git a/include/uapi/linux/netfilter_ipv4/Kbuild b/include/uapi/linux/netfilter_ipv4/Kbuild
deleted file mode 100644
index ecb291df390e..000000000000
--- a/include/uapi/linux/netfilter_ipv4/Kbuild
+++ /dev/null
@@ -1,10 +0,0 @@
-# UAPI Header export list
-header-y += ip_tables.h
-header-y += ipt_CLUSTERIP.h
-header-y += ipt_ECN.h
-header-y += ipt_LOG.h
-header-y += ipt_REJECT.h
-header-y += ipt_TTL.h
-header-y += ipt_ah.h
-header-y += ipt_ecn.h
-header-y += ipt_ttl.h
diff --git a/include/uapi/linux/netfilter_ipv6/Kbuild b/include/uapi/linux/netfilter_ipv6/Kbuild
deleted file mode 100644
index 75a668ca2353..000000000000
--- a/include/uapi/linux/netfilter_ipv6/Kbuild
+++ /dev/null
@@ -1,13 +0,0 @@
-# UAPI Header export list
-header-y += ip6_tables.h
-header-y += ip6t_HL.h
-header-y += ip6t_LOG.h
-header-y += ip6t_NPT.h
-header-y += ip6t_REJECT.h
-header-y += ip6t_ah.h
-header-y += ip6t_frag.h
-header-y += ip6t_hl.h
-header-y += ip6t_ipv6header.h
-header-y += ip6t_mh.h
-header-y += ip6t_opts.h
-header-y += ip6t_rt.h
diff --git a/include/uapi/linux/nfsd/Kbuild b/include/uapi/linux/nfsd/Kbuild
deleted file mode 100644
index c11bc404053c..000000000000
--- a/include/uapi/linux/nfsd/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += cld.h
-header-y += debug.h
-header-y += export.h
-header-y += nfsfh.h
-header-y += stats.h
diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild
deleted file mode 100644
index e2c3d25405d7..000000000000
--- a/include/uapi/linux/raid/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += md_p.h
-header-y += md_u.h
diff --git a/include/uapi/linux/spi/Kbuild b/include/uapi/linux/spi/Kbuild
deleted file mode 100644
index 0cc747eff165..000000000000
--- a/include/uapi/linux/spi/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += spidev.h
diff --git a/include/uapi/linux/sunrpc/Kbuild b/include/uapi/linux/sunrpc/Kbuild
deleted file mode 100644
index 8e02e47c20fb..000000000000
--- a/include/uapi/linux/sunrpc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += debug.h
diff --git a/include/uapi/linux/tc_act/Kbuild b/include/uapi/linux/tc_act/Kbuild
deleted file mode 100644
index ba62ddf0e58a..000000000000
--- a/include/uapi/linux/tc_act/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-# UAPI Header export list
-header-y += tc_csum.h
-header-y += tc_defact.h
-header-y += tc_gact.h
-header-y += tc_ipt.h
-header-y += tc_mirred.h
-header-y += tc_sample.h
-header-y += tc_nat.h
-header-y += tc_pedit.h
-header-y += tc_skbedit.h
-header-y += tc_vlan.h
-header-y += tc_bpf.h
-header-y += tc_connmark.h
-header-y += tc_ife.h
-header-y += tc_tunnel_key.h
-header-y += tc_skbmod.h
diff --git a/include/uapi/linux/tc_ematch/Kbuild b/include/uapi/linux/tc_ematch/Kbuild
deleted file mode 100644
index 53fca3925535..000000000000
--- a/include/uapi/linux/tc_ematch/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += tc_em_cmp.h
-header-y += tc_em_meta.h
-header-y += tc_em_nbyte.h
-header-y += tc_em_text.h
diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild
deleted file mode 100644
index 4cc4d6e7e523..000000000000
--- a/include/uapi/linux/usb/Kbuild
+++ /dev/null
@@ -1,12 +0,0 @@
-# UAPI Header export list
-header-y += audio.h
-header-y += cdc.h
-header-y += cdc-wdm.h
-header-y += ch11.h
-header-y += ch9.h
-header-y += functionfs.h
-header-y += g_printer.h
-header-y += gadgetfs.h
-header-y += midi.h
-header-y += tmc.h
-header-y += video.h
diff --git a/include/uapi/linux/wimax/Kbuild b/include/uapi/linux/wimax/Kbuild
deleted file mode 100644
index 1c97be49971f..000000000000
--- a/include/uapi/linux/wimax/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# UAPI Header export list
-header-y += i2400m.h
diff --git a/include/uapi/misc/Kbuild b/include/uapi/misc/Kbuild
deleted file mode 100644
index e96cae7d58c9..000000000000
--- a/include/uapi/misc/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# misc Header export list
-header-y += cxl.h
diff --git a/include/uapi/mtd/Kbuild b/include/uapi/mtd/Kbuild
deleted file mode 100644
index 5a691e10cd0e..000000000000
--- a/include/uapi/mtd/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += inftl-user.h
-header-y += mtd-abi.h
-header-y += mtd-user.h
-header-y += nftl-user.h
-header-y += ubi-user.h
diff --git a/include/uapi/rdma/Kbuild b/include/uapi/rdma/Kbuild
deleted file mode 100644
index 1e0af1ff75c3..000000000000
--- a/include/uapi/rdma/Kbuild
+++ /dev/null
@@ -1,20 +0,0 @@
-# UAPI Header export list
-header-y += ib_user_cm.h
-header-y += rdma_user_ioctl.h
-header-y += ib_user_mad.h
-header-y += ib_user_sa.h
-header-y += ib_user_verbs.h
-header-y += rdma_netlink.h
-header-y += rdma_user_cm.h
-header-y += hfi/
-header-y += rdma_user_rxe.h
-header-y += cxgb3-abi.h
-header-y += cxgb4-abi.h
-header-y += mlx4-abi.h
-header-y += mlx5-abi.h
-header-y += mthca-abi.h
-header-y += nes-abi.h
-header-y += ocrdma-abi.h
-header-y += hns-abi.h
-header-y += vmw_pvrdma-abi.h
-header-y += qedr-abi.h
diff --git a/include/uapi/rdma/hfi/Kbuild b/include/uapi/rdma/hfi/Kbuild
deleted file mode 100644
index b65b0b3a5f63..000000000000
--- a/include/uapi/rdma/hfi/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-# UAPI Header export list
-header-y += hfi1_user.h
-header-y += hfi1_ioctl.h
diff --git a/include/uapi/scsi/Kbuild b/include/uapi/scsi/Kbuild
deleted file mode 100644
index d791e0ad509d..000000000000
--- a/include/uapi/scsi/Kbuild
+++ /dev/null
@@ -1,6 +0,0 @@
-# UAPI Header export list
-header-y += fc/
-header-y += scsi_bsg_fc.h
-header-y += scsi_netlink.h
-header-y += scsi_netlink_fc.h
-header-y += cxlflash_ioctl.h
diff --git a/include/uapi/scsi/fc/Kbuild b/include/uapi/scsi/fc/Kbuild
deleted file mode 100644
index 5ead9fac265c..000000000000
--- a/include/uapi/scsi/fc/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += fc_els.h
-header-y += fc_fs.h
-header-y += fc_gs.h
-header-y += fc_ns.h
diff --git a/include/uapi/sound/Kbuild b/include/uapi/sound/Kbuild
deleted file mode 100644
index 9578d8bdbf31..000000000000
--- a/include/uapi/sound/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-# UAPI Header export list
-header-y += asequencer.h
-header-y += asoc.h
-header-y += asound.h
-header-y += asound_fm.h
-header-y += compress_offload.h
-header-y += compress_params.h
-header-y += emu10k1.h
-header-y += firewire.h
-header-y += hdsp.h
-header-y += hdspm.h
-header-y += sb16_csp.h
-header-y += sfnt_info.h
-header-y += tlv.h
-header-y += usb_stream.h
-header-y += snd_sst_tokens.h
diff --git a/include/uapi/video/Kbuild b/include/uapi/video/Kbuild
deleted file mode 100644
index ac7203bb32cc..000000000000
--- a/include/uapi/video/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-# UAPI Header export list
-header-y += edid.h
-header-y += sisfb.h
-header-y += uvesafb.h
diff --git a/include/uapi/xen/Kbuild b/include/uapi/xen/Kbuild
deleted file mode 100644
index 5c459628e8c7..000000000000
--- a/include/uapi/xen/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-# UAPI Header export list
-header-y += evtchn.h
-header-y += gntalloc.h
-header-y += gntdev.h
-header-y += privcmd.h
diff --git a/include/video/Kbuild b/include/video/Kbuild
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index ca5d439c9abf..20be1fbc19cc 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -1,17 +1,19 @@
# ==========================================================================
# Installing headers
#
-# header-y - list files to be installed. They are preprocessed
-# to remove __KERNEL__ section of the file
-# genhdr-y - Same as header-y but in a generated/ directory
+# All headers under include/uapi, include/generated/uapi,
+# arch/<arch>/include/uapi/asm and arch/<arch>/include/generated/uapi/asm are
+# exported.
+# They are preprocessed to remove __KERNEL__ section of the file.
#
# ==========================================================================
# generated header directory
gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
+# Kbuild file is optional
kbuild-file := $(srctree)/$(obj)/Kbuild
-include $(kbuild-file)
+-include $(kbuild-file)
# called may set destination dir (when installing to asm/)
_dst := $(if $(dst),$(dst),$(obj))
@@ -25,9 +27,15 @@ include scripts/Kbuild.include
installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
-header-y := $(sort $(header-y))
-subdirs := $(patsubst %/,%,$(filter %/, $(header-y)))
-header-y := $(filter-out %/, $(header-y))
+srcdir := $(srctree)/$(obj)
+gendir := $(objtree)/$(gen)
+subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
+subdirs += $(subdir-y)
+header-files := $(notdir $(wildcard $(srcdir)/*.h))
+header-files += $(notdir $(wildcard $(srcdir)/*.agh))
+header-files := $(filter-out $(no-export-headers), $(header-files))
+genhdr-files := $(notdir $(wildcard $(gendir)/*.h))
+genhdr-files := $(filter-out $(header-files), $(genhdr-files))
# files used to track state of install/check
install-file := $(installdir)/.install
@@ -35,25 +43,20 @@ check-file := $(installdir)/.check
# generic-y list all files an architecture uses from asm-generic
# Use this to build a list of headers which require a wrapper
-wrapper-files := $(filter $(header-y), $(generic-y))
-
-srcdir := $(srctree)/$(obj)
-gendir := $(objtree)/$(gen)
+generic-files := $(notdir $(wildcard $(srctree)/include/uapi/asm-generic/*.h))
+wrapper-files := $(filter $(generic-files), $(generic-y))
+wrapper-files := $(filter-out $(header-files), $(wrapper-files))
# all headers files for this dir
-header-y := $(filter-out $(generic-y), $(header-y))
-all-files := $(header-y) $(genhdr-y) $(wrapper-files)
+all-files := $(header-files) $(genhdr-files) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))
-# Check that all expected files exist
-$(foreach hdr, $(header-y), \
- $(if $(wildcard $(srcdir)/$(hdr)),, \
- $(error Missing UAPI file $(srcdir)/$(hdr)) \
- ))
-$(foreach hdr, $(genhdr-y), \
- $(if $(wildcard $(gendir)/$(hdr)),, \
- $(error Missing generated UAPI file $(gendir)/$(hdr)) \
- ))
+ifneq ($(mandatory-y),)
+missing := $(filter-out $(all-files),$(mandatory-y))
+ifneq ($(missing),)
+$(error Some mandatory headers ($(missing)) are missing in $(obj))
+endif
+endif
# Work out what needs to be removed
oldheaders := $(patsubst $(installdir)/%,%,$(wildcard $(installdir)/*.h))
@@ -67,8 +70,8 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-y); \
- $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-y); \
+ $(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-files); \
+ $(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-files); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
@@ -95,8 +98,8 @@ __headersinst: $(subdirs) $(install-file)
targets += $(install-file)
$(install-file): scripts/headers_install.sh \
- $(addprefix $(srcdir)/,$(header-y)) \
- $(addprefix $(gendir)/,$(genhdr-y)) FORCE
+ $(addprefix $(srcdir)/,$(header-files)) \
+ $(addprefix $(gendir)/,$(genhdr-files)) FORCE
$(if $(unwanted),$(call cmd,remove),)
$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
$(call if_changed,install)
--
2.8.1
This patch prepares the uapi export by fixing the following error:
.../linux/smc_diag.h:6:27: fatal error: rdma/ib_verbs.h: No such file or directory
#include <rdma/ib_verbs.h>
Signed-off-by: Nicolas Dichtel <[email protected]>
---
include/rdma/ib_verbs.h | 3 +--
include/uapi/linux/smc_diag.h | 2 +-
include/uapi/rdma/ib_user_verbs.h | 2 ++
3 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 0f1813c13687..50f276a4afdc 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -61,6 +61,7 @@
#include <linux/mmu_notifier.h>
#include <linux/uaccess.h>
#include <linux/cgroup_rdma.h>
+#include <uapi/rdma/ib_user_verbs.h>
extern struct workqueue_struct *ib_wq;
extern struct workqueue_struct *ib_comp_wq;
@@ -1838,8 +1839,6 @@ enum ib_mad_result {
IB_MAD_RESULT_CONSUMED = 1 << 2 /* Packet consumed: stop processing */
};
-#define IB_DEVICE_NAME_MAX 64
-
struct ib_port_cache {
struct ib_pkey_cache *pkey;
struct ib_gid_table *gid;
diff --git a/include/uapi/linux/smc_diag.h b/include/uapi/linux/smc_diag.h
index 0063919fea34..87712bfaa9dd 100644
--- a/include/uapi/linux/smc_diag.h
+++ b/include/uapi/linux/smc_diag.h
@@ -3,7 +3,7 @@
#include <linux/types.h>
#include <linux/inet_diag.h>
-#include <rdma/ib_verbs.h>
+#include <rdma/ib_user_verbs.h>
/* Request structure */
struct smc_diag_req {
diff --git a/include/uapi/rdma/ib_user_verbs.h b/include/uapi/rdma/ib_user_verbs.h
index 997f904c7692..8edce2b65903 100644
--- a/include/uapi/rdma/ib_user_verbs.h
+++ b/include/uapi/rdma/ib_user_verbs.h
@@ -1124,4 +1124,6 @@ struct ib_uverbs_ex_destroy_rwq_ind_table {
__u32 ind_tbl_handle;
};
+#define IB_DEVICE_NAME_MAX 64
+
#endif /* IB_USER_VERBS_H */
--
2.8.1
Signed-off-by: Nicolas Dichtel <[email protected]>
---
arch/cris/include/arch-v10/arch/Kbuild | 1 -
arch/cris/include/arch-v32/arch/Kbuild | 1 -
arch/tile/include/arch/Kbuild | 1 -
3 files changed, 3 deletions(-)
delete mode 100644 arch/cris/include/arch-v10/arch/Kbuild
delete mode 100644 arch/cris/include/arch-v32/arch/Kbuild
delete mode 100644 arch/tile/include/arch/Kbuild
diff --git a/arch/cris/include/arch-v10/arch/Kbuild b/arch/cris/include/arch-v10/arch/Kbuild
deleted file mode 100644
index 1f0fc7a66f5f..000000000000
--- a/arch/cris/include/arch-v10/arch/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-# CRISv10 arch
diff --git a/arch/cris/include/arch-v32/arch/Kbuild b/arch/cris/include/arch-v32/arch/Kbuild
deleted file mode 100644
index 2fd65c7e15c9..000000000000
--- a/arch/cris/include/arch-v32/arch/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-# CRISv32 arch
diff --git a/arch/tile/include/arch/Kbuild b/arch/tile/include/arch/Kbuild
deleted file mode 100644
index 3751c9fabcf2..000000000000
--- a/arch/tile/include/arch/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-# Tile arch headers
--
2.8.1
Hi Nicolas,
2017-03-27 18:45 GMT+09:00 Nicolas Dichtel <[email protected]>:
>> I wanted to leave comments/questions on 10/11,
>> but I could not find 10/11 in my mailbox. I do not know why.
> Note that you can download the mail from the kbuild patchwork, open it with your
> email client and do a reply ;-)
I took the patch from the patchwork for git-am,
but I was too lazy to import it to my mailer. I will try it next time.
Thanks for the tip!
--
Best Regards
Masahiro Yamada
2017-03-27 21:20 GMT+09:00 Nicolas Dichtel <[email protected]>:
>
>
> Patches #1 and #2 are just cleanup: some exported headers were still under
> a non-uapi directory. Patch #3 is a fix to avoid exporting a file that was
> not under an uapi directory.
> After these three patches, all exported headers are under an uapi directory:
> path #4 stops searching files in non uapi directories.
> The patch #5 was spotted by code review: there is no in-tree user of this
> functionality.
> Patch #6 fixes some warnings/errors reported by 0-day tests.
> Patch #7 to #9 fix some errors when the corresponding files are included by
> userland.
> Patches #10 and #11 remove the need to list explicitly headers. Now all files
> under an uapi directory are exported.
> Patch #12 is also a small cleanup.
>
> This series has been tested with a 'make headers_install' on x86 and a
> 'make headers_install_all'. I've checked the result of both commands.
>
> This patch is built on top of masahiroy/linux-kbuild.git#for-next (v4.11-rc1).
> I didn't find any conflict with v4.11-rc4.
>
> v10 -> v11:
> - patch #1: restore the double '_' in the header guard
> - patch #6, #7, #8: order '#include' in alphabetical order
> - patch #10: rename header-n to no-export-headers
> cleanup management of kvm.h, kvm_para.h and a.out.h
> - patch #12: add it
> - rebase on top of masahiroy/linux-kbuild.git#for-next
Series, applied to linux-kbuild/uapi. Thanks!
--
Best Regards
Masahiro Yamada
On Mon, Mar 27, 2017 at 02:20:13PM +0200, Nicolas Dichtel wrote:
> This patch prepares the uapi export by fixing the following error:
>
> .../linux/cryptouser.h:58:16: error: ‘CRYPTO_MAX_ALG_NAME’ undeclared here (not in a function)
> char cru_name[CRYPTO_MAX_ALG_NAME];
>
> Signed-off-by: Nicolas Dichtel <[email protected]>
> Acked-by: Herbert Xu <[email protected]>
Can we revert this patch please? I had forgotten about it when
increasing the in-kernel CRYPTO_MAX_ALG_NAME so it now conflicts
with the crypto tree. The crypto tree has fixed the problem in
a different way.
Thanks,
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt