2017-07-14 07:06:12

by Ran Wang

Subject: [PATCH v2] arm64: dts: ls1012a: add USB host controller nodes

LS1012A has one USB 3.0(DWC3) controller and
one USB 2.0 controller.

Signed-off-by: Ran Wang <[email protected]>
---
Change in v2:
Move node usb2@8600000 to the back of sata@3200000 to keep nodes
sorted in unit-address.

arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b1554cb..df83915 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -444,6 +444,15 @@
<&clockgen 4 3>;
};

+ usb0: usb3@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
@@ -454,5 +463,13 @@
dma-coherent;
status = "disabled";
};
+
+ usb1: usb2@8600000 {
+ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+ reg = <0x0 0x8600000 0x0 0x1000>;
+ interrupts = <0 139 0x4>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
};
};
--
2.1.0.27.g96db324

2017-07-25 08:04:19

by Shawn Guo

Subject: Re: [PATCH v2] arm64: dts: ls1012a: add USB host controller nodes

On Fri, Jul 14, 2017 at 02:49:09PM +0800, Ran Wang wrote:
> LS1012A has one USB 3.0(DWC3) controller and
> one USB 2.0 controller.
>
> Signed-off-by: Ran Wang <[email protected]>

Applied, thanks.