Move the adis16201 driver out of staging directory and merge to the
mainline IIO directory.
Signed-off-by: Himanshu Jha <[email protected]>
---
drivers/iio/accel/Kconfig | 12 ++
drivers/iio/accel/Makefile | 1 +
drivers/iio/accel/adis16201.c | 315 ++++++++++++++++++++++++++++++++++
drivers/staging/iio/accel/Kconfig | 12 --
drivers/staging/iio/accel/Makefile | 1 -
drivers/staging/iio/accel/adis16201.c | 315 ----------------------------------
6 files changed, 328 insertions(+), 328 deletions(-)
create mode 100644 drivers/iio/accel/adis16201.c
delete mode 100644 drivers/staging/iio/accel/adis16201.c
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index c6d9517..9416c6f 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -5,6 +5,18 @@
menu "Accelerometers"
+config ADIS16201
+ tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
+ depends on SPI
+ select IIO_ADIS_LIB
+ select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+ help
+ Say Y here to build support for Analog Devices adis16201 dual-axis
+ digital inclinometer and accelerometer.
+
+ To compile this driver as a module, say M here: the module will
+ be called adis16201.
+
config ADXL345
tristate
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 368aedb..7832ec9 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -4,6 +4,7 @@
#
# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_ADIS16201) += adis16201.o
obj-$(CONFIG_ADXL345) += adxl345_core.o
obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c
new file mode 100644
index 0000000..6800347
--- /dev/null
+++ b/drivers/iio/accel/adis16201.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer
+ *
+ * Copyright 2010 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/imu/adis.h>
+
+#define ADIS16201_STARTUP_DELAY_MS 220
+#define ADIS16201_FLASH_CNT_REG 0x00
+
+/* Data Output Register Definitions */
+#define ADIS16201_SUPPLY_OUT_REG 0x02
+#define ADIS16201_XACCL_OUT_REG 0x04
+#define ADIS16201_YACCL_OUT_REG 0x06
+#define ADIS16201_AUX_ADC_REG 0x08
+#define ADIS16201_TEMP_OUT_REG 0x0A
+#define ADIS16201_XINCL_OUT_REG 0x0C
+#define ADIS16201_YINCL_OUT_REG 0x0E
+
+/* Calibration Register Definitions */
+#define ADIS16201_XACCL_OFFS_REG 0x10
+#define ADIS16201_YACCL_OFFS_REG 0x12
+#define ADIS16201_XACCL_SCALE_REG 0x14
+#define ADIS16201_YACCL_SCALE_REG 0x16
+#define ADIS16201_XINCL_OFFS_REG 0x18
+#define ADIS16201_YINCL_OFFS_REG 0x1A
+#define ADIS16201_XINCL_SCALE_REG 0x1C
+#define ADIS16201_YINCL_SCALE_REG 0x1E
+
+/* Alarm Register Definitions */
+#define ADIS16201_ALM_MAG1_REG 0x20
+#define ADIS16201_ALM_MAG2_REG 0x22
+#define ADIS16201_ALM_SMPL1_REG 0x24
+#define ADIS16201_ALM_SMPL2_REG 0x26
+#define ADIS16201_ALM_CTRL_REG 0x28
+
+#define ADIS16201_AUX_DAC_REG 0x30
+#define ADIS16201_GPIO_CTRL_REG 0x32
+#define ADIS16201_SMPL_PRD_REG 0x36
+#define ADIS16201_AVG_CNT_REG 0x38
+#define ADIS16201_SLP_CNT_REG 0x3A
+
+/* MSC_CTRL */
+#define ADIS16201_MSC_CTRL_REG 0x34
+#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
+#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
+#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
+#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
+
+/* DIAG_STAT */
+#define ADIS16201_DIAG_STAT_REG 0x3C
+#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
+#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
+#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
+#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
+#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
+#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
+
+/* GLOB_CMD */
+#define ADIS16201_GLOB_CMD_REG 0x3E
+#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
+#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
+
+#define ADIS16201_ERROR_ACTIVE BIT(14)
+
+enum adis16201_scan {
+ ADIS16201_SCAN_ACC_X,
+ ADIS16201_SCAN_ACC_Y,
+ ADIS16201_SCAN_INCLI_X,
+ ADIS16201_SCAN_INCLI_Y,
+ ADIS16201_SCAN_SUPPLY,
+ ADIS16201_SCAN_AUX_ADC,
+ ADIS16201_SCAN_TEMP,
+};
+
+static const u8 adis16201_addresses[] = {
+ [ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS_REG,
+ [ADIS16201_SCAN_ACC_Y] = ADIS16201_YACCL_OFFS_REG,
+ [ADIS16201_SCAN_INCLI_X] = ADIS16201_XINCL_OFFS_REG,
+ [ADIS16201_SCAN_INCLI_Y] = ADIS16201_YINCL_OFFS_REG,
+};
+
+static int adis16201_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2,
+ long mask)
+{
+ struct adis *st = iio_priv(indio_dev);
+ int ret;
+ int bits;
+ u8 addr;
+ s16 val16;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return adis_single_conversion(indio_dev, chan,
+ ADIS16201_ERROR_ACTIVE, val);
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ switch (chan->channel) {
+ case 0:
+ *val = 1;
+ *val2 = 220000;
+ break;
+ case 1:
+ *val = 0;
+ *val2 = 610000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_TEMP:
+ *val = -470;
+ *val2 = 0;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_ACCEL:
+ *val = 0;
+ *val2 = IIO_G_TO_M_S_2(462400);
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_INCLI:
+ *val = 0;
+ *val2 = 100000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = 25000 / -470 - 1278;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->type) {
+ case IIO_ACCEL:
+ bits = 12;
+ break;
+ case IIO_INCLI:
+ bits = 9;
+ break;
+ default:
+ return -EINVAL;
+ }
+ addr = adis16201_addresses[chan->scan_index];
+ ret = adis_read_reg_16(st, addr, &val16);
+ if (ret)
+ return ret;
+
+ *val = sign_extend32(val16, bits - 1);
+ return IIO_VAL_INT;
+ }
+
+ return -EINVAL;
+}
+
+static int adis16201_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct adis *st = iio_priv(indio_dev);
+ int bits;
+ s16 val16;
+ u8 addr;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->type) {
+ case IIO_ACCEL:
+ bits = 12;
+ break;
+ case IIO_INCLI:
+ bits = 9;
+ break;
+ default:
+ return -EINVAL;
+ }
+ val16 = val & ((1 << bits) - 1);
+ addr = adis16201_addresses[chan->scan_index];
+ return adis_write_reg_16(st, addr, val16);
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_chan_spec adis16201_channels[] = {
+ ADIS_SUPPLY_CHAN(ADIS16201_SUPPLY_OUT_REG, ADIS16201_SCAN_SUPPLY, 0, 12),
+ ADIS_TEMP_CHAN(ADIS16201_TEMP_OUT_REG, ADIS16201_SCAN_TEMP, 0, 12),
+ ADIS_ACCEL_CHAN(X, ADIS16201_XACCL_OUT_REG, ADIS16201_SCAN_ACC_X,
+ BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+ ADIS_ACCEL_CHAN(Y, ADIS16201_YACCL_OUT_REG, ADIS16201_SCAN_ACC_Y,
+ BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+ ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12),
+ ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X,
+ BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+ ADIS_INCLI_CHAN(X, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y,
+ BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+ IIO_CHAN_SOFT_TIMESTAMP(7)
+};
+
+static const struct iio_info adis16201_info = {
+ .read_raw = adis16201_read_raw,
+ .write_raw = adis16201_write_raw,
+ .update_scan_mode = adis_update_scan_mode,
+};
+
+static const char * const adis16201_status_error_msgs[] = {
+ [ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16201_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+ [ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+};
+
+static const struct adis_data adis16201_data = {
+ .read_delay = 20,
+ .msc_ctrl_reg = ADIS16201_MSC_CTRL_REG,
+ .glob_cmd_reg = ADIS16201_GLOB_CMD_REG,
+ .diag_stat_reg = ADIS16201_DIAG_STAT_REG,
+
+ .self_test_mask = ADIS16201_MSC_CTRL_SELF_TEST_EN,
+ .self_test_no_autoclear = true,
+ .startup_delay = ADIS16201_STARTUP_DELAY_MS,
+
+ .status_error_msgs = adis16201_status_error_msgs,
+ .status_error_mask = BIT(ADIS16201_DIAG_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16201_DIAG_STAT_FLASH_UPT_BIT) |
+ BIT(ADIS16201_DIAG_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16201_DIAG_STAT_POWER_LOW_BIT),
+};
+
+static int adis16201_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct adis *st;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ spi_set_drvdata(spi, indio_dev);
+
+ indio_dev->name = spi->dev.driver->name;
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->info = &adis16201_info;
+
+ indio_dev->channels = adis16201_channels;
+ indio_dev->num_channels = ARRAY_SIZE(adis16201_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = adis_init(st, indio_dev, spi, &adis16201_data);
+ if (ret)
+ return ret;
+
+ ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
+ if (ret)
+ return ret;
+
+ /* Get the device into a sane initial state */
+ ret = adis_initial_startup(st);
+ if (ret)
+ goto error_cleanup_buffer_trigger;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ goto error_cleanup_buffer_trigger;
+
+ return 0;
+
+error_cleanup_buffer_trigger:
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
+
+ return ret;
+}
+
+static int adis16201_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct adis *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ adis_cleanup_buffer_and_trigger(st, indio_dev);
+
+ return 0;
+}
+
+static struct spi_driver adis16201_driver = {
+ .driver = {
+ .name = "adis16201",
+ },
+ .probe = adis16201_probe,
+ .remove = adis16201_remove,
+};
+module_spi_driver(adis16201_driver);
+
+MODULE_AUTHOR("Barry Song <[email protected]>");
+MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:adis16201");
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
index c6b0f5e..2f61e21 100644
--- a/drivers/staging/iio/accel/Kconfig
+++ b/drivers/staging/iio/accel/Kconfig
@@ -3,18 +3,6 @@
#
menu "Accelerometers"
-config ADIS16201
- tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer"
- depends on SPI
- select IIO_ADIS_LIB
- select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
- help
- Say Y here to build support for Analog Devices adis16201 dual-axis
- digital inclinometer and accelerometer.
-
- To compile this driver as a module, say M here: the module will
- be called adis16201.
-
config ADIS16203
tristate "Analog Devices ADIS16203 Programmable 360 Degrees Inclinometer"
depends on SPI
diff --git a/drivers/staging/iio/accel/Makefile b/drivers/staging/iio/accel/Makefile
index 5d8ad21..7dd55410 100644
--- a/drivers/staging/iio/accel/Makefile
+++ b/drivers/staging/iio/accel/Makefile
@@ -2,7 +2,6 @@
# Makefile for industrial I/O accelerometer drivers
#
-obj-$(CONFIG_ADIS16201) += adis16201.o
obj-$(CONFIG_ADIS16203) += adis16203.o
obj-$(CONFIG_ADIS16209) += adis16209.o
obj-$(CONFIG_ADIS16240) += adis16240.o
diff --git a/drivers/staging/iio/accel/adis16201.c b/drivers/staging/iio/accel/adis16201.c
deleted file mode 100644
index 6800347..0000000
--- a/drivers/staging/iio/accel/adis16201.c
+++ /dev/null
@@ -1,315 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer
- *
- * Copyright 2010 Analog Devices Inc.
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/imu/adis.h>
-
-#define ADIS16201_STARTUP_DELAY_MS 220
-#define ADIS16201_FLASH_CNT_REG 0x00
-
-/* Data Output Register Definitions */
-#define ADIS16201_SUPPLY_OUT_REG 0x02
-#define ADIS16201_XACCL_OUT_REG 0x04
-#define ADIS16201_YACCL_OUT_REG 0x06
-#define ADIS16201_AUX_ADC_REG 0x08
-#define ADIS16201_TEMP_OUT_REG 0x0A
-#define ADIS16201_XINCL_OUT_REG 0x0C
-#define ADIS16201_YINCL_OUT_REG 0x0E
-
-/* Calibration Register Definitions */
-#define ADIS16201_XACCL_OFFS_REG 0x10
-#define ADIS16201_YACCL_OFFS_REG 0x12
-#define ADIS16201_XACCL_SCALE_REG 0x14
-#define ADIS16201_YACCL_SCALE_REG 0x16
-#define ADIS16201_XINCL_OFFS_REG 0x18
-#define ADIS16201_YINCL_OFFS_REG 0x1A
-#define ADIS16201_XINCL_SCALE_REG 0x1C
-#define ADIS16201_YINCL_SCALE_REG 0x1E
-
-/* Alarm Register Definitions */
-#define ADIS16201_ALM_MAG1_REG 0x20
-#define ADIS16201_ALM_MAG2_REG 0x22
-#define ADIS16201_ALM_SMPL1_REG 0x24
-#define ADIS16201_ALM_SMPL2_REG 0x26
-#define ADIS16201_ALM_CTRL_REG 0x28
-
-#define ADIS16201_AUX_DAC_REG 0x30
-#define ADIS16201_GPIO_CTRL_REG 0x32
-#define ADIS16201_SMPL_PRD_REG 0x36
-#define ADIS16201_AVG_CNT_REG 0x38
-#define ADIS16201_SLP_CNT_REG 0x3A
-
-/* MSC_CTRL */
-#define ADIS16201_MSC_CTRL_REG 0x34
-#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
-#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
-#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
-#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
-
-/* DIAG_STAT */
-#define ADIS16201_DIAG_STAT_REG 0x3C
-#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
-#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
-#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
-#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
-#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
-#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
-
-/* GLOB_CMD */
-#define ADIS16201_GLOB_CMD_REG 0x3E
-#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
-#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
-
-#define ADIS16201_ERROR_ACTIVE BIT(14)
-
-enum adis16201_scan {
- ADIS16201_SCAN_ACC_X,
- ADIS16201_SCAN_ACC_Y,
- ADIS16201_SCAN_INCLI_X,
- ADIS16201_SCAN_INCLI_Y,
- ADIS16201_SCAN_SUPPLY,
- ADIS16201_SCAN_AUX_ADC,
- ADIS16201_SCAN_TEMP,
-};
-
-static const u8 adis16201_addresses[] = {
- [ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS_REG,
- [ADIS16201_SCAN_ACC_Y] = ADIS16201_YACCL_OFFS_REG,
- [ADIS16201_SCAN_INCLI_X] = ADIS16201_XINCL_OFFS_REG,
- [ADIS16201_SCAN_INCLI_Y] = ADIS16201_YINCL_OFFS_REG,
-};
-
-static int adis16201_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2,
- long mask)
-{
- struct adis *st = iio_priv(indio_dev);
- int ret;
- int bits;
- u8 addr;
- s16 val16;
-
- switch (mask) {
- case IIO_CHAN_INFO_RAW:
- return adis_single_conversion(indio_dev, chan,
- ADIS16201_ERROR_ACTIVE, val);
- case IIO_CHAN_INFO_SCALE:
- switch (chan->type) {
- case IIO_VOLTAGE:
- switch (chan->channel) {
- case 0:
- *val = 1;
- *val2 = 220000;
- break;
- case 1:
- *val = 0;
- *val2 = 610000;
- break;
- default:
- return -EINVAL;
- }
- return IIO_VAL_INT_PLUS_MICRO;
- case IIO_TEMP:
- *val = -470;
- *val2 = 0;
- return IIO_VAL_INT_PLUS_MICRO;
- case IIO_ACCEL:
- *val = 0;
- *val2 = IIO_G_TO_M_S_2(462400);
- return IIO_VAL_INT_PLUS_NANO;
- case IIO_INCLI:
- *val = 0;
- *val2 = 100000;
- return IIO_VAL_INT_PLUS_MICRO;
- default:
- return -EINVAL;
- }
- break;
- case IIO_CHAN_INFO_OFFSET:
- *val = 25000 / -470 - 1278;
- return IIO_VAL_INT;
- case IIO_CHAN_INFO_CALIBBIAS:
- switch (chan->type) {
- case IIO_ACCEL:
- bits = 12;
- break;
- case IIO_INCLI:
- bits = 9;
- break;
- default:
- return -EINVAL;
- }
- addr = adis16201_addresses[chan->scan_index];
- ret = adis_read_reg_16(st, addr, &val16);
- if (ret)
- return ret;
-
- *val = sign_extend32(val16, bits - 1);
- return IIO_VAL_INT;
- }
-
- return -EINVAL;
-}
-
-static int adis16201_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val,
- int val2,
- long mask)
-{
- struct adis *st = iio_priv(indio_dev);
- int bits;
- s16 val16;
- u8 addr;
-
- switch (mask) {
- case IIO_CHAN_INFO_CALIBBIAS:
- switch (chan->type) {
- case IIO_ACCEL:
- bits = 12;
- break;
- case IIO_INCLI:
- bits = 9;
- break;
- default:
- return -EINVAL;
- }
- val16 = val & ((1 << bits) - 1);
- addr = adis16201_addresses[chan->scan_index];
- return adis_write_reg_16(st, addr, val16);
- }
-
- return -EINVAL;
-}
-
-static const struct iio_chan_spec adis16201_channels[] = {
- ADIS_SUPPLY_CHAN(ADIS16201_SUPPLY_OUT_REG, ADIS16201_SCAN_SUPPLY, 0, 12),
- ADIS_TEMP_CHAN(ADIS16201_TEMP_OUT_REG, ADIS16201_SCAN_TEMP, 0, 12),
- ADIS_ACCEL_CHAN(X, ADIS16201_XACCL_OUT_REG, ADIS16201_SCAN_ACC_X,
- BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
- ADIS_ACCEL_CHAN(Y, ADIS16201_YACCL_OUT_REG, ADIS16201_SCAN_ACC_Y,
- BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
- ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC_REG, ADIS16201_SCAN_AUX_ADC, 0, 12),
- ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT_REG, ADIS16201_SCAN_INCLI_X,
- BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
- ADIS_INCLI_CHAN(X, ADIS16201_YINCL_OUT_REG, ADIS16201_SCAN_INCLI_Y,
- BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
- IIO_CHAN_SOFT_TIMESTAMP(7)
-};
-
-static const struct iio_info adis16201_info = {
- .read_raw = adis16201_read_raw,
- .write_raw = adis16201_write_raw,
- .update_scan_mode = adis_update_scan_mode,
-};
-
-static const char * const adis16201_status_error_msgs[] = {
- [ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
- [ADIS16201_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
- [ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
- [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
-};
-
-static const struct adis_data adis16201_data = {
- .read_delay = 20,
- .msc_ctrl_reg = ADIS16201_MSC_CTRL_REG,
- .glob_cmd_reg = ADIS16201_GLOB_CMD_REG,
- .diag_stat_reg = ADIS16201_DIAG_STAT_REG,
-
- .self_test_mask = ADIS16201_MSC_CTRL_SELF_TEST_EN,
- .self_test_no_autoclear = true,
- .startup_delay = ADIS16201_STARTUP_DELAY_MS,
-
- .status_error_msgs = adis16201_status_error_msgs,
- .status_error_mask = BIT(ADIS16201_DIAG_STAT_SPI_FAIL_BIT) |
- BIT(ADIS16201_DIAG_STAT_FLASH_UPT_BIT) |
- BIT(ADIS16201_DIAG_STAT_POWER_HIGH_BIT) |
- BIT(ADIS16201_DIAG_STAT_POWER_LOW_BIT),
-};
-
-static int adis16201_probe(struct spi_device *spi)
-{
- struct iio_dev *indio_dev;
- struct adis *st;
- int ret;
-
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
- if (!indio_dev)
- return -ENOMEM;
-
- st = iio_priv(indio_dev);
- spi_set_drvdata(spi, indio_dev);
-
- indio_dev->name = spi->dev.driver->name;
- indio_dev->dev.parent = &spi->dev;
- indio_dev->info = &adis16201_info;
-
- indio_dev->channels = adis16201_channels;
- indio_dev->num_channels = ARRAY_SIZE(adis16201_channels);
- indio_dev->modes = INDIO_DIRECT_MODE;
-
- ret = adis_init(st, indio_dev, spi, &adis16201_data);
- if (ret)
- return ret;
-
- ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
- if (ret)
- return ret;
-
- /* Get the device into a sane initial state */
- ret = adis_initial_startup(st);
- if (ret)
- goto error_cleanup_buffer_trigger;
-
- ret = iio_device_register(indio_dev);
- if (ret < 0)
- goto error_cleanup_buffer_trigger;
-
- return 0;
-
-error_cleanup_buffer_trigger:
- adis_cleanup_buffer_and_trigger(st, indio_dev);
-
- return ret;
-}
-
-static int adis16201_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct adis *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- adis_cleanup_buffer_and_trigger(st, indio_dev);
-
- return 0;
-}
-
-static struct spi_driver adis16201_driver = {
- .driver = {
- .name = "adis16201",
- },
- .probe = adis16201_probe,
- .remove = adis16201_remove,
-};
-module_spi_driver(adis16201_driver);
-
-MODULE_AUTHOR("Barry Song <[email protected]>");
-MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:adis16201");
--
2.7.4
I think -M is prefered for these types of diffs? Not sure.
On Mon, Feb 12, 2018 at 05:24:59PM +0530, Himanshu Jha wrote:
> +static int adis16201_probe(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev;
> + struct adis *st;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + st = iio_priv(indio_dev);
> + spi_set_drvdata(spi, indio_dev);
> +
> + indio_dev->name = spi->dev.driver->name;
> + indio_dev->dev.parent = &spi->dev;
> + indio_dev->info = &adis16201_info;
> +
> + indio_dev->channels = adis16201_channels;
> + indio_dev->num_channels = ARRAY_SIZE(adis16201_channels);
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = adis_init(st, indio_dev, spi, &adis16201_data);
> + if (ret)
> + return ret;
> +
> + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
> + if (ret)
> + return ret;
We should clean up the IRQ which we enabled in adis_init() instead of
returning directly.
> +
> + /* Get the device into a sane initial state */
> + ret = adis_initial_startup(st);
> + if (ret)
> + goto error_cleanup_buffer_trigger;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0)
> + goto error_cleanup_buffer_trigger;
> +
> + return 0;
> +
> +error_cleanup_buffer_trigger:
> + adis_cleanup_buffer_and_trigger(st, indio_dev);
> +
> + return ret;
> +}
Otherwise it looks fine to my not-an-iio-expert eye.
regards,
dan carpenter
On Mon, Feb 12, 2018 at 12:54 PM, Himanshu Jha
<[email protected]> wrote:
> Move the adis16201 driver out of staging directory and merge to the
> mainline IIO directory.
>
> Signed-off-by: Himanshu Jha <[email protected]>
<snip>
> --- /dev/null
> +++ b/drivers/iio/accel/adis16201.c
> @@ -0,0 +1,315 @@
> +// SPDX-License-Identifier: GPL-2.0+
<snip>
> +MODULE_AUTHOR("Barry Song <[email protected]>");
> +MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("spi:adis16201");
Your MODULE_LICENSE does not match your SPDX license id.
MODULE_LICENSE("GPL v2"); means SPDX GPL-2.0
MODULE_LICENSE("GPL"); means SPDX GPL-2.0+
--
Cordially
Philippe Ombredanne
On Mon, Feb 12, 2018 at 03:10:56PM +0100, Philippe Ombredanne wrote:
> On Mon, Feb 12, 2018 at 12:54 PM, Himanshu Jha
> <[email protected]> wrote:
> > Move the adis16201 driver out of staging directory and merge to the
> > mainline IIO directory.
> >
> > Signed-off-by: Himanshu Jha <[email protected]>
>
> <snip>
> > --- /dev/null
> > +++ b/drivers/iio/accel/adis16201.c
> > @@ -0,0 +1,315 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> <snip>
>
> > +MODULE_AUTHOR("Barry Song <[email protected]>");
> > +MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_ALIAS("spi:adis16201");
>
> Your MODULE_LICENSE does not match your SPDX license id.
> MODULE_LICENSE("GPL v2"); means SPDX GPL-2.0
> MODULE_LICENSE("GPL"); means SPDX GPL-2.0+
>
I didn't knew about that! Thanks for pointing.
--
Thanks
Himanshu Jha
On Mon, Feb 12, 2018 at 04:18:26PM +0300, Dan Carpenter wrote:
> I think -M is prefered for these types of diffs? Not sure.
I wrote about that in the cover letter if you missed. :)
> On Mon, Feb 12, 2018 at 05:24:59PM +0530, Himanshu Jha wrote:
> > +static int adis16201_probe(struct spi_device *spi)
> > +{
> > + struct iio_dev *indio_dev;
> > + struct adis *st;
> > + int ret;
> > +
> > + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + st = iio_priv(indio_dev);
> > + spi_set_drvdata(spi, indio_dev);
> > +
> > + indio_dev->name = spi->dev.driver->name;
> > + indio_dev->dev.parent = &spi->dev;
> > + indio_dev->info = &adis16201_info;
> > +
> > + indio_dev->channels = adis16201_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(adis16201_channels);
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > +
> > + ret = adis_init(st, indio_dev, spi, &adis16201_data);
> > + if (ret)
> > + return ret;
> > +
> > + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
> > + if (ret)
> > + return ret;
>
> We should clean up the IRQ which we enabled in adis_init() instead of
> returning directly.
I'm not sure about how to do that.
--
Thanks
Himanshu Jha
On Mon, Feb 12, 2018 at 08:11:57PM +0530, Himanshu Jha wrote:
> On Mon, Feb 12, 2018 at 04:18:26PM +0300, Dan Carpenter wrote:
> > I think -M is prefered for these types of diffs? Not sure.
>
> I wrote about that in the cover letter if you missed. :)
>
Yeah. I seldom read cover letters.
> > > + ret = adis_init(st, indio_dev, spi, &adis16201_data);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
> > > + if (ret)
> > > + return ret;
> >
> > We should clean up the IRQ which we enabled in adis_init() instead of
> > returning directly.
>
> I'm not sure about how to do that.
>
I believe in you that you can figure it out. :)
regards,
dan carpenter
On Mon, Feb 12, 2018 at 3:37 PM, Himanshu Jha
<[email protected]> wrote:
> On Mon, Feb 12, 2018 at 03:10:56PM +0100, Philippe Ombredanne wrote:
>> On Mon, Feb 12, 2018 at 12:54 PM, Himanshu Jha
>> <[email protected]> wrote:
>> > Move the adis16201 driver out of staging directory and merge to the
>> > mainline IIO directory.
>> >
>> > Signed-off-by: Himanshu Jha <[email protected]>
>>
>> <snip>
>> > --- /dev/null
>> > +++ b/drivers/iio/accel/adis16201.c
>> > @@ -0,0 +1,315 @@
>> > +// SPDX-License-Identifier: GPL-2.0+
>>
>> <snip>
>>
>> > +MODULE_AUTHOR("Barry Song <[email protected]>");
>> > +MODULE_DESCRIPTION("Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer");
>> > +MODULE_LICENSE("GPL v2");
>> > +MODULE_ALIAS("spi:adis16201");
>>
>> Your MODULE_LICENSE does not match your SPDX license id.
>> MODULE_LICENSE("GPL v2"); means SPDX GPL-2.0
>> MODULE_LICENSE("GPL"); means SPDX GPL-2.0+
>>
>
> I didn't knew about that! Thanks for pointing.
Sure thing. I reckon this can be a tad surprising.
FWIW, the reference for the SPDX tag is in
Documentation/process/license-rules.rst and for the MODULE_LICENSE
macro this is in module.h
It is unlikely module.h will ever evolve there as this would break all
third-party module loaders/tools that rely on the documented data
values and conventions
--
Cordially
Philippe Ombredanne
On Mon, 12 Feb 2018 17:45:42 +0300
Dan Carpenter <[email protected]> wrote:
> On Mon, Feb 12, 2018 at 08:11:57PM +0530, Himanshu Jha wrote:
> > On Mon, Feb 12, 2018 at 04:18:26PM +0300, Dan Carpenter wrote:
> > > I think -M is prefered for these types of diffs? Not sure.
> >
> > I wrote about that in the cover letter if you missed. :)
> >
>
> Yeah. I seldom read cover letters.
For anyone else (like me) who also doesn't often read them...
This was a specific request from me to not use move detection.
The reason is that it presents an opportunity for staging graduation patches
for people to have the whole code in front of them allowing them to do a full
review as if it were a new driver.
I personally find this very helpful in this one case. For any other
code move I'm as in favour of short emails as the next person ;)
Jonathan
>
> > > > + ret = adis_init(st, indio_dev, spi, &adis16201_data);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
> > > > + if (ret)
> > > > + return ret;
> > >
> > > We should clean up the IRQ which we enabled in adis_init() instead of
> > > returning directly.
> >
> > I'm not sure about how to do that.
> >
>
> I believe in you that you can figure it out. :)
>
> regards,
> dan carpenter
>
>