... to avoid reading them from the config space of all the PCI VFs. This is
specially a useful optimization when bringing up thousands of VFs.
Cc: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: KarimAllah Ahmed <[email protected]>
---
v1 -> v2:
* Rebase on latest + remove dependency on a non-upstream patch.
drivers/pci/iov.c | 16 ++++++++++++++++
drivers/pci/pci.h | 5 +++++
drivers/pci/probe.c | 42 ++++++++++++++++++++++++++++++++----------
3 files changed, 53 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 677924a..e1d2e3f 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -114,6 +114,19 @@ resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
}
+static void pci_read_vf_config_common(struct pci_bus *bus, struct pci_dev *dev)
+{
+ int devfn = pci_iov_virtfn_devfn(dev, 0);
+
+ pci_bus_read_config_dword(bus, devfn, PCI_CLASS_REVISION,
+ &dev->sriov->class);
+ pci_bus_read_config_word(bus, devfn, PCI_SUBSYSTEM_ID,
+ &dev->sriov->subsystem_device);
+ pci_bus_read_config_word(bus, devfn, PCI_SUBSYSTEM_VENDOR_ID,
+ &dev->sriov->subsystem_vendor);
+ pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &dev->sriov->hdr_type);
+}
+
int pci_iov_add_virtfn(struct pci_dev *dev, int id)
{
int i;
@@ -133,6 +146,9 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id)
if (!virtfn)
goto failed0;
+ if (id == 0)
+ pci_read_vf_config_common(bus, dev);
+
virtfn->devfn = pci_iov_virtfn_devfn(dev, id);
virtfn->vendor = dev->vendor;
virtfn->device = iov->vf_device;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fcd8191..346daa5 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -271,6 +271,11 @@ struct pci_sriov {
u16 driver_max_VFs; /* Max num VFs driver supports */
struct pci_dev *dev; /* Lowest numbered PF */
struct pci_dev *self; /* This PF */
+ u8 hdr_type; /* VF header type */
+ u32 class; /* VF device */
+ u16 device; /* VF device */
+ u16 subsystem_vendor; /* VF subsystem vendor */
+ u16 subsystem_device; /* VF subsystem device */
resource_size_t barsz[PCI_SRIOV_NUM_BARS]; /* VF BAR size */
bool drivers_autoprobe; /* Auto probing of VFs by driver */
};
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ef53774..aeaa10a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -180,6 +180,7 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
struct resource *res, unsigned int pos)
{
+ int bar = res - dev->resource;
u32 l = 0, sz = 0, mask;
u64 l64, sz64, mask64;
u16 orig_cmd;
@@ -199,9 +200,13 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
res->name = pci_name(dev);
pci_read_config_dword(dev, pos, &l);
- pci_write_config_dword(dev, pos, l | mask);
- pci_read_config_dword(dev, pos, &sz);
- pci_write_config_dword(dev, pos, l);
+ if (dev->is_virtfn) {
+ sz = dev->physfn->sriov->barsz[bar] & 0xffffffff;
+ } else {
+ pci_write_config_dword(dev, pos, l | mask);
+ pci_read_config_dword(dev, pos, &sz);
+ pci_write_config_dword(dev, pos, l);
+ }
/*
* All bits set in sz means the device isn't working properly.
@@ -241,9 +246,14 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
if (res->flags & IORESOURCE_MEM_64) {
pci_read_config_dword(dev, pos + 4, &l);
- pci_write_config_dword(dev, pos + 4, ~0);
- pci_read_config_dword(dev, pos + 4, &sz);
- pci_write_config_dword(dev, pos + 4, l);
+
+ if (dev->is_virtfn) {
+ sz = (dev->physfn->sriov->barsz[bar] >> 32) & 0xffffffff;
+ } else {
+ pci_write_config_dword(dev, pos + 4, ~0);
+ pci_read_config_dword(dev, pos + 4, &sz);
+ pci_write_config_dword(dev, pos + 4, l);
+ }
l64 |= ((u64)l << 32);
sz64 |= ((u64)sz << 32);
@@ -332,6 +342,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
for (pos = 0; pos < howmany; pos++) {
struct resource *res = &dev->resource[pos];
reg = PCI_BASE_ADDRESS_0 + (pos << 2);
+ if (dev->is_virtfn && dev->physfn->sriov->barsz[pos] == 0)
+ continue;
pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
}
@@ -1454,7 +1466,9 @@ int pci_setup_device(struct pci_dev *dev)
struct pci_bus_region region;
struct resource *res;
- if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
+ if (dev->is_virtfn)
+ hdr_type = dev->physfn->sriov->hdr_type;
+ else if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
return -EIO;
dev->sysdata = dev->bus->sysdata;
@@ -1477,7 +1491,10 @@ int pci_setup_device(struct pci_dev *dev)
dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+ if (dev->is_virtfn)
+ class = dev->physfn->sriov->class;
+ else
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->revision = class & 0xff;
dev->class = class >> 8; /* upper 3 bytes */
@@ -1517,8 +1534,13 @@ int pci_setup_device(struct pci_dev *dev)
goto bad;
pci_read_irq(dev);
pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
- pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
- pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
+ if (dev->is_virtfn) {
+ dev->subsystem_vendor = dev->physfn->sriov->subsystem_vendor;
+ dev->subsystem_device = dev->physfn->sriov->subsystem_device;
+ } else {
+ pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
+ pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
+ }
/*
* Do the ugly legacy mode stuff here rather than broken chip
--
2.7.4
s|pci: Store|PCI/IOV: Store|
(run "git log --oneline drivers/pci/probe.c" to see why)
On Thu, Mar 01, 2018 at 02:26:04PM +0100, KarimAllah Ahmed wrote:
> ... to avoid reading them from the config space of all the PCI VFs. This is
> specially a useful optimization when bringing up thousands of VFs.
Please make the changelog complete in itself, so it doesn't have to be
read in conjunction with the subject. It's OK if you have to repeat
the subject in the changelog.
> Cc: Bjorn Helgaas <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: KarimAllah Ahmed <[email protected]>
> ---
> v1 -> v2:
> * Rebase on latest + remove dependency on a non-upstream patch.
>
> drivers/pci/iov.c | 16 ++++++++++++++++
> drivers/pci/pci.h | 5 +++++
> drivers/pci/probe.c | 42 ++++++++++++++++++++++++++++++++----------
> 3 files changed, 53 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> index 677924a..e1d2e3f 100644
> --- a/drivers/pci/iov.c
> +++ b/drivers/pci/iov.c
> @@ -114,6 +114,19 @@ resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
> return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
> }
>
> +static void pci_read_vf_config_common(struct pci_bus *bus, struct pci_dev *dev)
> +{
> + int devfn = pci_iov_virtfn_devfn(dev, 0);
> +
> + pci_bus_read_config_dword(bus, devfn, PCI_CLASS_REVISION,
> + &dev->sriov->class);
> + pci_bus_read_config_word(bus, devfn, PCI_SUBSYSTEM_ID,
> + &dev->sriov->subsystem_device);
> + pci_bus_read_config_word(bus, devfn, PCI_SUBSYSTEM_VENDOR_ID,
> + &dev->sriov->subsystem_vendor);
> + pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &dev->sriov->hdr_type);
Can't you do this a little later, e.g., after pci_iov_add_virtfn()
calls pci_setup_device(), and then use the standard
pci_read_config_*() interfaces instead of the special
pci_bus_read_config*() ones?
> +}
> +
> int pci_iov_add_virtfn(struct pci_dev *dev, int id)
> {
> int i;
> @@ -133,6 +146,9 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id)
> if (!virtfn)
> goto failed0;
>
> + if (id == 0)
> + pci_read_vf_config_common(bus, dev);
> +
> virtfn->devfn = pci_iov_virtfn_devfn(dev, id);
> virtfn->vendor = dev->vendor;
> virtfn->device = iov->vf_device;
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index fcd8191..346daa5 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -271,6 +271,11 @@ struct pci_sriov {
> u16 driver_max_VFs; /* Max num VFs driver supports */
> struct pci_dev *dev; /* Lowest numbered PF */
> struct pci_dev *self; /* This PF */
> + u8 hdr_type; /* VF header type */
> + u32 class; /* VF device */
> + u16 device; /* VF device */
> + u16 subsystem_vendor; /* VF subsystem vendor */
> + u16 subsystem_device; /* VF subsystem device */
Please make the whitespace here match the existing code, i.e.,
line up the structure element names and comments.
> resource_size_t barsz[PCI_SRIOV_NUM_BARS]; /* VF BAR size */
> bool drivers_autoprobe; /* Auto probing of VFs by driver */
> };
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index ef53774..aeaa10a 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -180,6 +180,7 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
> int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
> struct resource *res, unsigned int pos)
> {
> + int bar = res - dev->resource;
> u32 l = 0, sz = 0, mask;
> u64 l64, sz64, mask64;
> u16 orig_cmd;
> @@ -199,9 +200,13 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
> res->name = pci_name(dev);
>
> pci_read_config_dword(dev, pos, &l);
> - pci_write_config_dword(dev, pos, l | mask);
> - pci_read_config_dword(dev, pos, &sz);
> - pci_write_config_dword(dev, pos, l);
> + if (dev->is_virtfn) {
> + sz = dev->physfn->sriov->barsz[bar] & 0xffffffff;
> + } else {
> + pci_write_config_dword(dev, pos, l | mask);
> + pci_read_config_dword(dev, pos, &sz);
> + pci_write_config_dword(dev, pos, l);
> + }
This part is not like the others, i.e., the others are caching info
from VF 0 in newly-added elements of struct pci_sriov. This also uses
information from struct pci_sriov, but it's qualitatively different,
so it should be in a separate patch.
> /*
> * All bits set in sz means the device isn't working properly.
> @@ -241,9 +246,14 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
>
> if (res->flags & IORESOURCE_MEM_64) {
> pci_read_config_dword(dev, pos + 4, &l);
> - pci_write_config_dword(dev, pos + 4, ~0);
> - pci_read_config_dword(dev, pos + 4, &sz);
> - pci_write_config_dword(dev, pos + 4, l);
> +
> + if (dev->is_virtfn) {
> + sz = (dev->physfn->sriov->barsz[bar] >> 32) & 0xffffffff;
> + } else {
> + pci_write_config_dword(dev, pos + 4, ~0);
> + pci_read_config_dword(dev, pos + 4, &sz);
> + pci_write_config_dword(dev, pos + 4, l);
> + }
>
> l64 |= ((u64)l << 32);
> sz64 |= ((u64)sz << 32);
> @@ -332,6 +342,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
> for (pos = 0; pos < howmany; pos++) {
> struct resource *res = &dev->resource[pos];
> reg = PCI_BASE_ADDRESS_0 + (pos << 2);
> + if (dev->is_virtfn && dev->physfn->sriov->barsz[pos] == 0)
> + continue;
> pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
> }
>
> @@ -1454,7 +1466,9 @@ int pci_setup_device(struct pci_dev *dev)
> struct pci_bus_region region;
> struct resource *res;
>
> - if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
> + if (dev->is_virtfn)
> + hdr_type = dev->physfn->sriov->hdr_type;
> + else if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
> return -EIO;
>
> dev->sysdata = dev->bus->sysdata;
> @@ -1477,7 +1491,10 @@ int pci_setup_device(struct pci_dev *dev)
> dev->bus->number, PCI_SLOT(dev->devfn),
> PCI_FUNC(dev->devfn));
>
> - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
> + if (dev->is_virtfn)
> + class = dev->physfn->sriov->class;
> + else
> + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
> dev->revision = class & 0xff;
> dev->class = class >> 8; /* upper 3 bytes */
>
> @@ -1517,8 +1534,13 @@ int pci_setup_device(struct pci_dev *dev)
> goto bad;
> pci_read_irq(dev);
> pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
> - pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
> - pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
> + if (dev->is_virtfn) {
> + dev->subsystem_vendor = dev->physfn->sriov->subsystem_vendor;
> + dev->subsystem_device = dev->physfn->sriov->subsystem_device;
PCIe r4.0, sec 9.3.4.1.13 requires that Subsystem Vendor ID be the
same for the PF and all VFs, but sec 9.3.4.1.14 says the PF and VF may
have different Subsystem IDs. I know you're caching the Subsystem ID
from VF 0, not the PF, but I don't see anything that requires all the
VFs to have the same Subsystem ID.
I think the same is technically true for the Revision ID. It might be
reasonable to assume all the VFs have the same values, but maybe worth
a comment.
> + } else {
> + pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
> + pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
> + }
>
> /*
> * Do the ugly legacy mode stuff here rather than broken chip
> --
> 2.7.4
>
On Thu, 2018-03-01 at 13:34 -0600, Bjorn Helgaas wrote:
> s|pci: Store|PCI/IOV: Store|
>
> (run "git log --oneline drivers/pci/probe.c" to see why)
>
> On Thu, Mar 01, 2018 at 02:26:04PM +0100, KarimAllah Ahmed wrote:
> >
> > ... to avoid reading them from the config space of all the PCI VFs. This is
> > specially a useful optimization when bringing up thousands of VFs.
>
> Please make the changelog complete in itself, so it doesn't have to be
> read in conjunction with the subject. It's OK if you have to repeat
> the subject in the changelog.
ack.
>
> >
> > Cc: Bjorn Helgaas <[email protected]>
> > Cc: [email protected]
> > Cc: [email protected]
> > Signed-off-by: KarimAllah Ahmed <[email protected]>
> > ---
> > v1 -> v2:
> > * Rebase on latest + remove dependency on a non-upstream patch.
> >
> > drivers/pci/iov.c | 16 ++++++++++++++++
> > drivers/pci/pci.h | 5 +++++
> > drivers/pci/probe.c | 42 ++++++++++++++++++++++++++++++++----------
> > 3 files changed, 53 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > index 677924a..e1d2e3f 100644
> > --- a/drivers/pci/iov.c
> > +++ b/drivers/pci/iov.c
> > @@ -114,6 +114,19 @@ resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
> > return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
> > }
> >
> > +static void pci_read_vf_config_common(struct pci_bus *bus, struct pci_dev *dev)
> > +{
> > + int devfn = pci_iov_virtfn_devfn(dev, 0);
> > +
> > + pci_bus_read_config_dword(bus, devfn, PCI_CLASS_REVISION,
> > + &dev->sriov->class);
> > + pci_bus_read_config_word(bus, devfn, PCI_SUBSYSTEM_ID,
> > + &dev->sriov->subsystem_device);
> > + pci_bus_read_config_word(bus, devfn, PCI_SUBSYSTEM_VENDOR_ID,
> > + &dev->sriov->subsystem_vendor);
> > + pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &dev->sriov->hdr_type);
>
> Can't you do this a little later, e.g., after pci_iov_add_virtfn()
> calls pci_setup_device(), and then use the standard
> pci_read_config_*() interfaces instead of the special
> pci_bus_read_config*() ones?
ack.
I moved it after "pci_iov_virtfn_devfn".
>
> >
> > +}
> > +
> > int pci_iov_add_virtfn(struct pci_dev *dev, int id)
> > {
> > int i;
> > @@ -133,6 +146,9 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id)
> > if (!virtfn)
> > goto failed0;
> >
> > + if (id == 0)
> > + pci_read_vf_config_common(bus, dev);
> > +
> > virtfn->devfn = pci_iov_virtfn_devfn(dev, id);
> > virtfn->vendor = dev->vendor;
> > virtfn->device = iov->vf_device;
> > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> > index fcd8191..346daa5 100644
> > --- a/drivers/pci/pci.h
> > +++ b/drivers/pci/pci.h
> > @@ -271,6 +271,11 @@ struct pci_sriov {
> > u16 driver_max_VFs; /* Max num VFs driver supports */
> > struct pci_dev *dev; /* Lowest numbered PF */
> > struct pci_dev *self; /* This PF */
> > + u8 hdr_type; /* VF header type */
> > + u32 class; /* VF device */
> > + u16 device; /* VF device */
> > + u16 subsystem_vendor; /* VF subsystem vendor */
> > + u16 subsystem_device; /* VF subsystem device */
>
> Please make the whitespace here match the existing code, i.e.,
> line up the structure element names and comments.
ack!
>
> >
> > resource_size_t barsz[PCI_SRIOV_NUM_BARS]; /* VF BAR size */
> > bool drivers_autoprobe; /* Auto probing of VFs by driver */
> > };
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index ef53774..aeaa10a 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -180,6 +180,7 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
> > int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
> > struct resource *res, unsigned int pos)
> > {
> > + int bar = res - dev->resource;
> > u32 l = 0, sz = 0, mask;
> > u64 l64, sz64, mask64;
> > u16 orig_cmd;
> > @@ -199,9 +200,13 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
> > res->name = pci_name(dev);
> >
> > pci_read_config_dword(dev, pos, &l);
> > - pci_write_config_dword(dev, pos, l | mask);
> > - pci_read_config_dword(dev, pos, &sz);
> > - pci_write_config_dword(dev, pos, l);
> > + if (dev->is_virtfn) {
> > + sz = dev->physfn->sriov->barsz[bar] & 0xffffffff;
> > + } else {
> > + pci_write_config_dword(dev, pos, l | mask);
> > + pci_read_config_dword(dev, pos, &sz);
> > + pci_write_config_dword(dev, pos, l);
> > + }
>
> This part is not like the others, i.e., the others are caching info
> from VF 0 in newly-added elements of struct pci_sriov. This also uses
> information from struct pci_sriov, but it's qualitatively different,
> so it should be in a separate patch.
ack. Moved to a seperate patch.
>
> >
> > /*
> > * All bits set in sz means the device isn't working properly.
> > @@ -241,9 +246,14 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
> >
> > if (res->flags & IORESOURCE_MEM_64) {
> > pci_read_config_dword(dev, pos + 4, &l);
> > - pci_write_config_dword(dev, pos + 4, ~0);
> > - pci_read_config_dword(dev, pos + 4, &sz);
> > - pci_write_config_dword(dev, pos + 4, l);
> > +
> > + if (dev->is_virtfn) {
> > + sz = (dev->physfn->sriov->barsz[bar] >> 32) & 0xffffffff;
> > + } else {
> > + pci_write_config_dword(dev, pos + 4, ~0);
> > + pci_read_config_dword(dev, pos + 4, &sz);
> > + pci_write_config_dword(dev, pos + 4, l);
> > + }
> >
> > l64 |= ((u64)l << 32);
> > sz64 |= ((u64)sz << 32);
> > @@ -332,6 +342,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
> > for (pos = 0; pos < howmany; pos++) {
> > struct resource *res = &dev->resource[pos];
> > reg = PCI_BASE_ADDRESS_0 + (pos << 2);
> > + if (dev->is_virtfn && dev->physfn->sriov->barsz[pos] == 0)
> > + continue;
> > pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
> > }
> >
> > @@ -1454,7 +1466,9 @@ int pci_setup_device(struct pci_dev *dev)
> > struct pci_bus_region region;
> > struct resource *res;
> >
> > - if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
> > + if (dev->is_virtfn)
> > + hdr_type = dev->physfn->sriov->hdr_type;
> > + else if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
> > return -EIO;
> >
> > dev->sysdata = dev->bus->sysdata;
> > @@ -1477,7 +1491,10 @@ int pci_setup_device(struct pci_dev *dev)
> > dev->bus->number, PCI_SLOT(dev->devfn),
> > PCI_FUNC(dev->devfn));
> >
> > - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
> > + if (dev->is_virtfn)
> > + class = dev->physfn->sriov->class;
> > + else
> > + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
> > dev->revision = class & 0xff;
> > dev->class = class >> 8; /* upper 3 bytes */
> >
> > @@ -1517,8 +1534,13 @@ int pci_setup_device(struct pci_dev *dev)
> > goto bad;
> > pci_read_irq(dev);
> > pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
> > - pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
> > - pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
> > + if (dev->is_virtfn) {
> > + dev->subsystem_vendor = dev->physfn->sriov->subsystem_vendor;
> > + dev->subsystem_device = dev->physfn->sriov->subsystem_device;
>
> PCIe r4.0, sec 9.3.4.1.13 requires that Subsystem Vendor ID be the
> same for the PF and all VFs, but sec 9.3.4.1.14 says the PF and VF may
> have different Subsystem IDs. I know you're caching the Subsystem ID
> from VF 0, not the PF, but I don't see anything that requires all the
> VFs to have the same Subsystem ID.
>
> I think the same is technically true for the Revision ID. It might be
> reasonable to assume all the VFs have the same values, but maybe worth
> a comment.
I added a comment about that for the 3 fields.
>
> >
> > + } else {
> > + pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
> > + pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
> > + }
> >
> > /*
> > * Do the ugly legacy mode stuff here rather than broken chip
> > --
> > 2.7.4
> >
>
Amazon Development Center Germany GmbH
Berlin - Dresden - Aachen
main office: Krausenstr. 38, 10117 Berlin
Geschaeftsfuehrer: Dr. Ralf Herbrich, Christian Schlaeger
Ust-ID: DE289237879
Eingetragen am Amtsgericht Charlottenburg HRB 149173 B