2018-04-11 12:48:22

by Jacopo Mondi

[permalink] [raw]
Subject: [PATCH v3 0/5] V3M-Eagle HDMI output enablement

Hello,
I have rebased the Eagle display enablement on top of (part of) Sergei's
series:
[PATCH v2 0/5] Add R8A77970/V3MSK LVDS/HDMI support

Simon: you can skip "[1/5] arm64: dts: renesas: r8a77970: add FCPVD support"
as you already collected that

Sergei: I re-sent your series because there was an additional comment from
Laurent on [3/5]. I felt it was wrong to send a follow up patch on a series
still not collected by Simon, so I've resent it. Hope this time is ok with you.
Also, please note that [5/5] of your original series shall be re-sent using
the newly introduced (still in-review) LVDS decoder. Please see [5/5] of this
series as an example.

Niklas: [5/5] of this series is a fixup of your patches and mine. I added
your signed-off-by, hope it is ok.

The series depends on THC63LVD1024 driver, currently submitted for inclusion
"[PATCH v8 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge"
currently available at:
git://jmondi.org/linux lvds-bridge/linus-master/v8

Thanks
j

v2 -> v3:
- Use Sergei's series for patches [1-4] with a minor comment from Laurent
- Remove the lvds-decoder node label and add Laurent's Reviewed-by in [5/5]

v1 -> v2:
- Add Laurent's reviewed by tags
- Fixup patch 5, 6 and 7 of v1
- Remove DU digital output pin muxing
- Update thc63lvd1024 to use the new bindings with mandatory power supply
- Minor fixes (changes are described individually in each patch)

Jacopo Mondi (1):
arm64: dts: renesas: eagle: Enable HDMI output

Sergei Shtylyov (4):
arm64: dts: renesas: r8a77970: add FCPVD support
arm64: dts: renesas: r8a77970: add VSPD support
arm64: dts: renesas: r8a77970: add DU support
arm64: dts: renesas: r8a77970: add LVDS support

arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 93 ++++++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a77970.dtsi | 75 +++++++++++++++++++++
2 files changed, 168 insertions(+)

--
2.7.4



2018-04-12 08:12:15

by Simon Horman

[permalink] [raw]
Subject: Re: [PATCH v3 0/5] V3M-Eagle HDMI output enablement

On Wed, Apr 11, 2018 at 02:43:05PM +0200, Jacopo Mondi wrote:
> Hello,
> I have rebased the Eagle display enablement on top of (part of) Sergei's
> series:
> [PATCH v2 0/5] Add R8A77970/V3MSK LVDS/HDMI support

Hi Jacopo,

the emails with the patches of this series do not
seem to have hit my inbox or patchwork.


2018-04-12 08:18:23

by jacopo mondi

[permalink] [raw]
Subject: Re: [PATCH v3 0/5] V3M-Eagle HDMI output enablement

Hi Simon,

On Thu, Apr 12, 2018 at 10:08:27AM +0200, Simon Horman wrote:
> On Wed, Apr 11, 2018 at 02:43:05PM +0200, Jacopo Mondi wrote:
> > Hello,
> > I have rebased the Eagle display enablement on top of (part of) Sergei's
> > series:
> > [PATCH v2 0/5] Add R8A77970/V3MSK LVDS/HDMI support
>
> Hi Jacopo,
>
> the emails with the patches of this series do not
> seem to have hit my inbox or patchwork.
>

Damn, I've noticed! I have no idea what happened, I have 3 out of 5
patches in my inbox, but it seems most of them didn't went out.

ISP problems again? :(

I'll resend right away


Attachments:
(No filename) (612.00 B)
signature.asc (836.00 B)
Download all attachments