After decompression of 6lowpan socket data, an IPv6 header is inserted
before the existing socket payload. After this, we reset the
network_header value of the skb to account for the difference in payload
size from prior to decompression + the addition of the IPv6 header.
However, we fail to reset the mac_header value.
Leaving the mac_header value untouched here, can cause a calculation
error in net/packet/af_packet.c packet_rcv() function when an
AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
interface.
On line 2088, the data pointer is moved backward by the value returned
from skb_mac_header(). If skb->data is adjusted so that it is before
the skb->head pointer (which can happen when an old value of mac_header
is left in place) the kernel generates a panic in net/core/skbuff.c
line 1717.
This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
sources for compression and decompression.
Signed-off-by: Michael Scott <[email protected]>
---
net/6lowpan/iphc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
index 6b1042e21656..52fad5dad9f7 100644
--- a/net/6lowpan/iphc.c
+++ b/net/6lowpan/iphc.c
@@ -770,6 +770,7 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
hdr.hop_limit, &hdr.daddr);
skb_push(skb, sizeof(hdr));
+ skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
--
2.17.0
Hi,
On Tue, Jun 19, 2018 at 04:44:06PM -0700, Michael Scott wrote:
> After decompression of 6lowpan socket data, an IPv6 header is inserted
> before the existing socket payload. After this, we reset the
> network_header value of the skb to account for the difference in payload
> size from prior to decompression + the addition of the IPv6 header.
>
> However, we fail to reset the mac_header value.
>
> Leaving the mac_header value untouched here, can cause a calculation
> error in net/packet/af_packet.c packet_rcv() function when an
> AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
> interface.
>
> On line 2088, the data pointer is moved backward by the value returned
> from skb_mac_header(). If skb->data is adjusted so that it is before
> the skb->head pointer (which can happen when an old value of mac_header
> is left in place) the kernel generates a panic in net/core/skbuff.c
> line 1717.
>
> This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
> 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
> sources for compression and decompression.
>
> Signed-off-by: Michael Scott <[email protected]>
> ---
> net/6lowpan/iphc.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
> index 6b1042e21656..52fad5dad9f7 100644
> --- a/net/6lowpan/iphc.c
> +++ b/net/6lowpan/iphc.c
> @@ -770,6 +770,7 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
> hdr.hop_limit, &hdr.daddr);
>
> skb_push(skb, sizeof(hdr));
> + skb_reset_mac_header(skb);
> skb_reset_network_header(skb);
> skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
>
I think it's good to make that if the mac_header gets a dangled pointer.
But we don't have a mac header at this point anymore...
There exists also some functionality that the MAC header is not set, I
suppose this can be usefuly for tun like interfaces e.g. RAW IP what we
have here.
skb_mac_header_was_set
which does:
return skb->mac_header != (typeof(skb->mac_header))~0U;
maybe we can set it as (typeof(skb->mac_header))~0U and then everything
will run as far the kernel will not crash anymore.
Question is for me: which upper layer wants access MAC header here on
receive path?
It cannot parsed anyhow because so far I know no upper layer can parse
at the moment 802.15.4 frames (which is a complex format). Maybe over
some header_ops callback?
- Alex
Hello Alexander,
On 07/02/2018 11:54 AM, Alexander Aring wrote:
> Hi,
>
> On Tue, Jun 19, 2018 at 04:44:06PM -0700, Michael Scott wrote:
>> After decompression of 6lowpan socket data, an IPv6 header is inserted
>> before the existing socket payload. After this, we reset the
>> network_header value of the skb to account for the difference in payload
>> size from prior to decompression + the addition of the IPv6 header.
>>
>> However, we fail to reset the mac_header value.
>>
>> Leaving the mac_header value untouched here, can cause a calculation
>> error in net/packet/af_packet.c packet_rcv() function when an
>> AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
>> interface.
>>
>> On line 2088, the data pointer is moved backward by the value returned
>> from skb_mac_header(). If skb->data is adjusted so that it is before
>> the skb->head pointer (which can happen when an old value of mac_header
>> is left in place) the kernel generates a panic in net/core/skbuff.c
>> line 1717.
>>
>> This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
>> 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
>> sources for compression and decompression.
>>
>> Signed-off-by: Michael Scott <[email protected]>
>> ---
>> net/6lowpan/iphc.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
>> index 6b1042e21656..52fad5dad9f7 100644
>> --- a/net/6lowpan/iphc.c
>> +++ b/net/6lowpan/iphc.c
>> @@ -770,6 +770,7 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
>> hdr.hop_limit, &hdr.daddr);
>>
>> skb_push(skb, sizeof(hdr));
>> + skb_reset_mac_header(skb);
>> skb_reset_network_header(skb);
>> skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
>>
> I think it's good to make that if the mac_header gets a dangled pointer.
> But we don't have a mac header at this point anymore...
>
> There exists also some functionality that the MAC header is not set, I
> suppose this can be usefuly for tun like interfaces e.g. RAW IP what we
> have here.
>
> skb_mac_header_was_set
>
> which does:
>
> return skb->mac_header != (typeof(skb->mac_header))~0U;
>
> maybe we can set it as (typeof(skb->mac_header))~0U and then everything
> will run as far the kernel will not crash anymore.
>
> Question is for me: which upper layer wants access MAC header here on
> receive path?
> It cannot parsed anyhow because so far I know no upper layer can parse
> at the moment 802.15.4 frames (which is a complex format). Maybe over
> some header_ops callback?
I was testing a C program which performs NAT64 handling on packets
destined to a certain IPv6 subnet (64:ff9b::). To do this, the
application opens a RAW socket like this: sniff_sock = socket(PF_PACKET,
SOCK_RAW, htons(ETH_P_ALL)); It then sets promiscuous mode and enters a
looping call of:
length = recv(sniff_sock, buffer, PACKET_BUFFER, MSG_TRUNC); My host PC
kernel would then promptly crash on me. (I'm going to purposely avoid
the obvious point of: this probably isn't the best way to parse packets
for NAT64 translation as you will get every single packet incoming or
outgoing on the host.) Turns out, testing the program on an 802.15.4
6lowpan interface exposed some of the issues which this mailing list
(but not myself) is well aware of (no L2 data in the RAW packets) and
also led me to debugging this patch to stop the kernel crash. TL;DR: To
summarize, any PF_PACKET SOCK_RAW socket which recv()'s IPv6 data from a
6lowpan node will cause this kernel crash eventually (checked on kernel
4.15, 4.16, 4.17 and 4.18-rc1). - Mike
>
> - Alex
Hi,
On Mon, Jul 02, 2018 at 12:45:41PM -0700, Michael Scott wrote:
> Hello Alexander,
>
...
> > Question is for me: which upper layer wants access MAC header here on
> > receive path?
> > It cannot parsed anyhow because so far I know no upper layer can parse
> > at the moment 802.15.4 frames (which is a complex format). Maybe over
> > some header_ops callback?
>
> I was testing a C program which performs NAT64 handling on packets
> destined to a certain IPv6 subnet (64:ff9b::). To do this, the application
> opens a RAW socket like this: sniff_sock = socket(PF_PACKET, SOCK_RAW,
> htons(ETH_P_ALL)); It then sets promiscuous mode and enters a looping call
> of:
> length = recv(sniff_sock, buffer, PACKET_BUFFER, MSG_TRUNC); My host PC
> kernel would then promptly crash on me. (I'm going to purposely avoid the
> obvious point of: this probably isn't the best way to parse packets for
> NAT64 translation as you will get every single packet incoming or outgoing
> on the host.) Turns out, testing the program on an 802.15.4 6lowpan
> interface exposed some of the issues which this mailing list (but not
> myself) is well aware of (no L2 data in the RAW packets) and also led me to
> debugging this patch to stop the kernel crash. TL;DR: To summarize, any
> PF_PACKET SOCK_RAW socket which recv()'s IPv6 data from a 6lowpan node will
> cause this kernel crash eventually (checked on kernel 4.15, 4.16, 4.17 and
> 4.18-rc1). - Mike
> >
"any PF_PACKET SOCK_RAW" can't be otherwise I would also see it with my
sniffer programs e.g. wireshark or tcpdump which use libpcap.
There need to be some different in the handling. This is what I have
currently in my mind.
I currently not sure how to set skb->mac_header if interface is RAW_IP.
It seems there is an indicator that mac header is not set. Example:
diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
index 6b1042e21656..e6ec2df3afe0 100644
--- a/net/6lowpan/iphc.c
+++ b/net/6lowpan/iphc.c
@@ -770,6 +770,7 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
hdr.hop_limit, &hdr.daddr);
skb_push(skb, sizeof(hdr));
+ skb->mac_header = (typeof(skb->mac_header))~0U;
skb_reset_network_header(skb);
skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
Maybe we should lookup what skb->mac_header points to on tun interfaces
then do the same.
- Alex
Hi,
On Mon, Jul 02, 2018 at 04:43:46PM -0400, Alexander Aring wrote:
> Hi,
>
> On Mon, Jul 02, 2018 at 12:45:41PM -0700, Michael Scott wrote:
> > Hello Alexander,
> >
> ...
> > > Question is for me: which upper layer wants access MAC header here on
> > > receive path?
> > > It cannot parsed anyhow because so far I know no upper layer can parse
> > > at the moment 802.15.4 frames (which is a complex format). Maybe over
> > > some header_ops callback?
> >
> > I was testing a C program which performs NAT64 handling on packets
> > destined to a certain IPv6 subnet (64:ff9b::). To do this, the application
> > opens a RAW socket like this: sniff_sock = socket(PF_PACKET, SOCK_RAW,
> > htons(ETH_P_ALL)); It then sets promiscuous mode and enters a looping call
> > of:
> > length = recv(sniff_sock, buffer, PACKET_BUFFER, MSG_TRUNC); My host PC
> > kernel would then promptly crash on me. (I'm going to purposely avoid the
> > obvious point of: this probably isn't the best way to parse packets for
> > NAT64 translation as you will get every single packet incoming or outgoing
> > on the host.) Turns out, testing the program on an 802.15.4 6lowpan
> > interface exposed some of the issues which this mailing list (but not
> > myself) is well aware of (no L2 data in the RAW packets) and also led me to
> > debugging this patch to stop the kernel crash. TL;DR: To summarize, any
> > PF_PACKET SOCK_RAW socket which recv()'s IPv6 data from a 6lowpan node will
> > cause this kernel crash eventually (checked on kernel 4.15, 4.16, 4.17 and
> > 4.18-rc1). - Mike
> > >
>
> "any PF_PACKET SOCK_RAW" can't be otherwise I would also see it with my
> sniffer programs e.g. wireshark or tcpdump which use libpcap.
>
> There need to be some different in the handling. This is what I have
> currently in my mind.
>
> I currently not sure how to set skb->mac_header if interface is RAW_IP.
> It seems there is an indicator that mac header is not set. Example:
>
> diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
> index 6b1042e21656..e6ec2df3afe0 100644
> --- a/net/6lowpan/iphc.c
> +++ b/net/6lowpan/iphc.c
> @@ -770,6 +770,7 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
> hdr.hop_limit, &hdr.daddr);
>
> skb_push(skb, sizeof(hdr));
> + skb->mac_header = (typeof(skb->mac_header))~0U;
> skb_reset_network_header(skb);
> skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
>
>
> Maybe we should lookup what skb->mac_header points to on tun interfaces
> then do the same.
So far I see [0] tun does the same as your patch approach does. network
header and mac header points to the same.
I think then we should go with your patch.
Then we just need to solve the issue to get mac header information on
top of lowpan socket layer... out of scope issue but indeed we need to
solve that. As we talked there exists even UDP protocols which needs mac
header information. It's in a pretty early state, I have no idea how
this fits sometimes with fragmentation handling together. At least for
L2 address handling and fragmentation it should be fine (one of the
fragment indentifier).
- Alex
[0] https://elixir.bootlin.com/linux/v4.18-rc3/source/drivers/net/tun.c#L1912
On Tue, Jun 19, 2018 at 04:44:06PM -0700, Michael Scott wrote:
> After decompression of 6lowpan socket data, an IPv6 header is inserted
> before the existing socket payload. After this, we reset the
> network_header value of the skb to account for the difference in payload
> size from prior to decompression + the addition of the IPv6 header.
>
> However, we fail to reset the mac_header value.
>
> Leaving the mac_header value untouched here, can cause a calculation
> error in net/packet/af_packet.c packet_rcv() function when an
> AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
> interface.
>
> On line 2088, the data pointer is moved backward by the value returned
> from skb_mac_header(). If skb->data is adjusted so that it is before
> the skb->head pointer (which can happen when an old value of mac_header
> is left in place) the kernel generates a panic in net/core/skbuff.c
> line 1717.
>
> This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
> 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
> sources for compression and decompression.
>
> Signed-off-by: Michael Scott <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Thanks!
- Alex
Hello Jukka.
On 20.06.2018 01:44, Michael Scott wrote:
> After decompression of 6lowpan socket data, an IPv6 header is inserted
> before the existing socket payload. After this, we reset the
> network_header value of the skb to account for the difference in payload
> size from prior to decompression + the addition of the IPv6 header.
>
> However, we fail to reset the mac_header value.
>
> Leaving the mac_header value untouched here, can cause a calculation
> error in net/packet/af_packet.c packet_rcv() function when an
> AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
> interface.
>
> On line 2088, the data pointer is moved backward by the value returned
> from skb_mac_header(). If skb->data is adjusted so that it is before
> the skb->head pointer (which can happen when an old value of mac_header
> is left in place) the kernel generates a panic in net/core/skbuff.c
> line 1717.
>
> This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
> 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
> sources for compression and decompression.
>
> Signed-off-by: Michael Scott <[email protected]>
> ---
> net/6lowpan/iphc.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
> index 6b1042e21656..52fad5dad9f7 100644
> --- a/net/6lowpan/iphc.c
> +++ b/net/6lowpan/iphc.c
> @@ -770,6 +770,7 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
> hdr.hop_limit, &hdr.daddr);
>
> skb_push(skb, sizeof(hdr));
> + skb_reset_mac_header(skb);
> skb_reset_network_header(skb);
> skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
>
>
Alex acked this patch for the ieee802154 side. Could you test it for the
bluetooth 6lowpan side and ack or nack as well?
So far plain 6lowpan subsystem patches would still go through the
bluetooth tree after Alex and you acked them. I guess Marcel or Johan
just waiting for your review.
regards
Stefan Schmidt
On Tue, 2018-06-19 at 16:44 -0700, Michael Scott wrote:
> After decompression of 6lowpan socket data, an IPv6 header is
> inserted
> before the existing socket payload. After this, we reset the
> network_header value of the skb to account for the difference in
> payload
> size from prior to decompression + the addition of the IPv6 header.
>
>
> Signed-off-by: Michael Scott <[email protected]>
> ---
> net/6lowpan/iphc.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
> index 6b1042e21656..52fad5dad9f7 100644
> --- a/net/6lowpan/iphc.c
> +++ b/net/6lowpan/iphc.c
> @@ -770,6 +770,7 @@ int lowpan_header_decompress(struct sk_buff *skb,
> const struct net_device *dev,
> hdr.hop_limit, &hdr.daddr);
>
> skb_push(skb, sizeof(hdr));
> + skb_reset_mac_header(skb);
> skb_reset_network_header(skb);
> skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
>
Acked-by: Jukka Rissanen <[email protected]>
Cheers,
Jukka
Hello.
On 20.06.2018 01:44, Michael Scott wrote:
> After decompression of 6lowpan socket data, an IPv6 header is inserted
> before the existing socket payload. After this, we reset the
> network_header value of the skb to account for the difference in payload
> size from prior to decompression + the addition of the IPv6 header.
>
> However, we fail to reset the mac_header value.
>
> Leaving the mac_header value untouched here, can cause a calculation
> error in net/packet/af_packet.c packet_rcv() function when an
> AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
> interface.
>
> On line 2088, the data pointer is moved backward by the value returned
> from skb_mac_header(). If skb->data is adjusted so that it is before
> the skb->head pointer (which can happen when an old value of mac_header
> is left in place) the kernel generates a panic in net/core/skbuff.c
> line 1717.
>
> This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
> 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
> sources for compression and decompression.
>
> Signed-off-by: Michael Scott <[email protected]>
> ---
> net/6lowpan/iphc.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
> index 6b1042e21656..52fad5dad9f7 100644
> --- a/net/6lowpan/iphc.c
> +++ b/net/6lowpan/iphc.c
> @@ -770,6 +770,7 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
> hdr.hop_limit, &hdr.daddr);
>
> skb_push(skb, sizeof(hdr));
> + skb_reset_mac_header(skb);
> skb_reset_network_header(skb);
> skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
This showed no problems in my ieee802154 + 6lowpan tests.
Acked-by: Stefan Schmidt <[email protected]>
regards
Stefan Schmidt
Hi Michael,
> After decompression of 6lowpan socket data, an IPv6 header is inserted
> before the existing socket payload. After this, we reset the
> network_header value of the skb to account for the difference in payload
> size from prior to decompression + the addition of the IPv6 header.
>
> However, we fail to reset the mac_header value.
>
> Leaving the mac_header value untouched here, can cause a calculation
> error in net/packet/af_packet.c packet_rcv() function when an
> AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan
> interface.
>
> On line 2088, the data pointer is moved backward by the value returned
> from skb_mac_header(). If skb->data is adjusted so that it is before
> the skb->head pointer (which can happen when an old value of mac_header
> is left in place) the kernel generates a panic in net/core/skbuff.c
> line 1717.
>
> This panic can be generated by BLE 6lowpan interfaces (such as bt0) and
> 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan
> sources for compression and decompression.
>
> Signed-off-by: Michael Scott <[email protected]>
> ---
> net/6lowpan/iphc.c | 1 +
> 1 file changed, 1 insertion(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel