All the callers of size_append pass $(filter-out FORCE,$^).
Move $(filter-out FORCE,$^) to the definition of size_append.
This makes the callers cleaner because $(call ...) is unneeded
for a macro with no argument.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
scripts/Makefile.lib | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index ecad15b..ebaa348 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -321,7 +321,7 @@ dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
# append the size as a 32-bit littleendian number as gzip does.
size_append = printf $(shell \
dec_size=0; \
-for F in $1; do \
+for F in $(filter-out FORCE,$^); do \
fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
dec_size=$$(expr $$dec_size + $$fsize); \
done; \
@@ -335,23 +335,20 @@ printf "%08x\n" $$dec_size | \
)
quiet_cmd_bzip2 = BZIP2 $@
-cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
- bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@
+ cmd_bzip2 = (cat $(filter-out FORCE,$^) | bzip2 -9 && $(size_append)) > $@
# Lzma
# ---------------------------------------------------------------------------
quiet_cmd_lzma = LZMA $@
-cmd_lzma = (cat $(filter-out FORCE,$^) | \
- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | lzma -9 && $(size_append)) > $@
quiet_cmd_lzo = LZO $@
-cmd_lzo = (cat $(filter-out FORCE,$^) | \
- lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@
+ cmd_lzo = (cat $(filter-out FORCE,$^) | lzop -9 && $(size_append)) > $@
quiet_cmd_lz4 = LZ4 $@
-cmd_lz4 = (cat $(filter-out FORCE,$^) | \
- lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@
+ cmd_lz4 = (cat $(filter-out FORCE,$^) | lz4c -l -c1 stdin stdout && \
+ $(size_append)) > $@
# U-Boot mkimage
# ---------------------------------------------------------------------------
@@ -394,8 +391,7 @@ quiet_cmd_uimage = UIMAGE $@
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN $@
cmd_xzkern = (cat $(filter-out FORCE,$^) | \
- sh $(srctree)/scripts/xz_wrap.sh && \
- $(call size_append, $(filter-out FORCE,$^))) > $@
+ sh $(srctree)/scripts/xz_wrap.sh && $(size_append)) > $@
quiet_cmd_xzmisc = XZMISC $@
cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
--
2.7.4
The commands surrounded by ( ) are executed in a subshell, but in
most cases, we do not need to spawn an extra subshell.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
scripts/Makefile.build | 4 ++--
scripts/Makefile.lib | 21 ++++++++++-----------
scripts/mkcompile_h | 4 ++--
3 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 9800178..f8e2794 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -312,11 +312,11 @@ $(real-obj-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
#
# These mirror gensymtypes_c and co above, keep them in synch.
cmd_gensymtypes_S = \
- (echo "\#include <linux/kernel.h>" ; \
+ { echo "\#include <linux/kernel.h>" ; \
echo "\#include <asm/asm-prototypes.h>" ; \
$(CPP) $(a_flags) $< | \
grep "\<___EXPORT_SYMBOL\>" | \
- sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ) | \
+ sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ; } | \
$(CPP) -D__GENKSYMS__ $(c_flags) -xc - | \
$(GENKSYMS) $(if $(1), -T $(2)) \
$(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS)) \
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index c6fc295..c0abd9a 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -271,7 +271,7 @@ DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
# Generate an assembly file to wrap the output of the device tree compiler
quiet_cmd_dt_S_dtb= DTB $@
cmd_dt_S_dtb= \
-( \
+{ \
echo '\#include <asm-generic/vmlinux.lds.h>'; \
echo '.section .dtb.init.rodata,"a"'; \
echo '.balign STRUCT_ALIGNMENT'; \
@@ -281,7 +281,7 @@ cmd_dt_S_dtb= \
echo '__dtb_$(subst -,_,$(*F))_end:'; \
echo '.global __dtb_$(subst -,_,$(*F))_end'; \
echo '.balign STRUCT_ALIGNMENT'; \
-) > $@
+} > $@
$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
$(call if_changed,dt_S_dtb)
@@ -335,20 +335,20 @@ printf "%08x\n" $$dec_size | \
)
quiet_cmd_bzip2 = BZIP2 $@
- cmd_bzip2 = (cat $(real-prereqs) | bzip2 -9 && $(size_append)) > $@
+ cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9 && $(size_append); } > $@
# Lzma
# ---------------------------------------------------------------------------
quiet_cmd_lzma = LZMA $@
- cmd_lzma = (cat $(real-prereqs) | lzma -9 && $(size_append)) > $@
+ cmd_lzma = { cat $(real-prereqs) | lzma -9 && $(size_append); } > $@
quiet_cmd_lzo = LZO $@
- cmd_lzo = (cat $(real-prereqs) | lzop -9 && $(size_append)) > $@
+ cmd_lzo = { cat $(real-prereqs) | lzop -9 && $(size_append); } > $@
quiet_cmd_lz4 = LZ4 $@
- cmd_lz4 = (cat $(real-prereqs) | lz4c -l -c1 stdin stdout && \
- $(size_append)) > $@
+ cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout && \
+ $(size_append); } > $@
# U-Boot mkimage
# ---------------------------------------------------------------------------
@@ -390,12 +390,11 @@ quiet_cmd_uimage = UIMAGE $@
# big dictionary would increase the memory usage too much in the multi-call
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN $@
- cmd_xzkern = (cat $(real-prereqs) | \
- sh $(srctree)/scripts/xz_wrap.sh && $(size_append)) > $@
+ cmd_xzkern = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh && \
+ $(size_append); } > $@
quiet_cmd_xzmisc = XZMISC $@
- cmd_xzmisc = (cat $(real-prereqs) | \
- xz --check=crc32 --lzma2=dict=1MiB) > $@
+ cmd_xzmisc = cat $(real-prereqs) | xz --check=crc32 --lzma2=dict=1MiB > $@
# ASM offsets
# ---------------------------------------------------------------------------
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 87f1fc9..2339f86 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -62,7 +62,7 @@ UTS_TRUNCATE="cut -b -$UTS_LEN"
# Generate a temporary compile.h
-( echo /\* This file is auto generated, version $VERSION \*/
+{ echo /\* This file is auto generated, version $VERSION \*/
if [ -n "$CONFIG_FLAGS" ] ; then echo "/* $CONFIG_FLAGS */"; fi
echo \#define UTS_MACHINE \"$ARCH\"
@@ -73,7 +73,7 @@ UTS_TRUNCATE="cut -b -$UTS_LEN"
echo \#define LINUX_COMPILE_HOST \"`echo $LINUX_COMPILE_HOST | $UTS_TRUNCATE`\"
echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | grep ' version ' | sed 's/[[:space:]]*$//'`\"
-) > .tmpcompile
+} > .tmpcompile
# Only replace the real compile.h if the new one is different,
# in order to preserve the timestamp and avoid unnecessary
--
2.7.4
When I was refactoring cmd_ar_builtin in scripts/Makefile.build,
I noticed the build breakage of s390.
Some Makefiles of s390 add extra dependencies to built-in.a;
built-in.a depends on timestamp files *.o.chkbss, but $(AR) does
not want to include them into built-in.a.
Insert a phony target 'chkbss' in between so that $(AR) can take
$(filter-out $(PHONY), $^) as input.
While I was here, I refactored Makefile.chkbss a little bit.
Signed-off-by: Masahiro Yamada <[email protected]>
---
I want Acked-by from a s390 maintainer so this series can go
into kbuild tree.
Changes in v2:
- New patch
arch/s390/boot/Makefile | 4 ++--
arch/s390/boot/compressed/Makefile | 4 ++--
arch/s390/scripts/Makefile.chkbss | 25 +++++++++++--------------
3 files changed, 15 insertions(+), 18 deletions(-)
diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile
index d5ad724..b4d8a42 100644
--- a/arch/s390/boot/Makefile
+++ b/arch/s390/boot/Makefile
@@ -67,6 +67,6 @@ install: $(CONFIGURE) $(obj)/bzImage
sh -x $(srctree)/$(obj)/install.sh $(KERNELRELEASE) $(obj)/bzImage \
System.map "$(INSTALL_PATH)"
-chkbss := $(OBJECTS)
-chkbss-target := $(obj)/startup.a
+chkbss := $(obj-y)
+chkbss-target := startup.a
include $(srctree)/arch/s390/scripts/Makefile.chkbss
diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile
index b1bdd15..fa529c5 100644
--- a/arch/s390/boot/compressed/Makefile
+++ b/arch/s390/boot/compressed/Makefile
@@ -63,6 +63,6 @@ OBJCOPYFLAGS_piggy.o := -I binary -O elf64-s390 -B s390:64-bit --rename-section
$(obj)/piggy.o: $(obj)/vmlinux.bin$(suffix-y) FORCE
$(call if_changed,objcopy)
-chkbss := $(filter-out $(obj)/piggy.o $(obj)/info.o,$(OBJECTS))
-chkbss-target := $(obj)/vmlinux.bin
+chkbss := $(filter-out piggy.o info.o, $(obj-y))
+chkbss-target := vmlinux.bin
include $(srctree)/arch/s390/scripts/Makefile.chkbss
diff --git a/arch/s390/scripts/Makefile.chkbss b/arch/s390/scripts/Makefile.chkbss
index 9bba2c1..cd7e8f44 100644
--- a/arch/s390/scripts/Makefile.chkbss
+++ b/arch/s390/scripts/Makefile.chkbss
@@ -1,23 +1,20 @@
# SPDX-License-Identifier: GPL-2.0
+chkbss-target ?= built-in.a
+$(obj)/$(chkbss-target): chkbss
+
+chkbss-files := $(addsuffix .chkbss, $(chkbss))
+clean-files += $(chkbss-files)
+
+PHONY += chkbss
+chkbss: $(addprefix $(obj)/, $(chkbss-files))
+
quiet_cmd_chkbss = CHKBSS $<
-define cmd_chkbss
- rm -f $@; \
+ cmd_chkbss = \
if ! $(OBJDUMP) -j .bss -w -h $< | awk 'END { if ($$3) exit 1 }'; then \
echo "error: $< .bss section is not empty" >&2; exit 1; \
fi; \
touch $@;
-endef
-
-chkbss-target ?= $(obj)/built-in.a
-ifneq (,$(findstring /,$(chkbss)))
-chkbss-files := $(patsubst %, %.chkbss, $(chkbss))
-else
-chkbss-files := $(patsubst %, $(obj)/%.chkbss, $(chkbss))
-endif
-
-$(chkbss-target): $(chkbss-files)
-targets += $(notdir $(chkbss-files))
-%.o.chkbss: %.o
+$(obj)/%.o.chkbss: $(obj)/%.o
$(call cmd,chkbss)
--
2.7.4
In Kbuild, if_changed and friends must have FORCE as a prerequisite.
Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
pattern to get the names of all the prerequisites except phony targets.
Add real-prereqs as a shorthand.
Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda74 ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.
Signed-off-by: Masahiro Yamada <[email protected]>
---
The patch context depends on some other ones.
Please use 'git am -C1' if you want to test this
on Linus' tree.
Changes in v2:
- clean up arch/s390/boot/Makefile as well
Documentation/devicetree/bindings/Makefile | 2 +-
arch/mips/boot/Makefile | 2 +-
arch/powerpc/boot/Makefile | 2 +-
arch/s390/boot/Makefile | 2 +-
arch/x86/realmode/rm/Makefile | 3 +--
scripts/Kbuild.include | 4 ++++
scripts/Makefile.build | 9 ++++++---
scripts/Makefile.lib | 18 +++++++++---------
scripts/Makefile.modpost | 2 +-
9 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 6e5cef0..e4eb5d1 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -15,7 +15,7 @@ DT_TMP_SCHEMA := processed-schema.yaml
extra-y += $(DT_TMP_SCHEMA)
quiet_cmd_mk_schema = SCHEMA $@
- cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^)
+ cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
DT_DOCS = $(shell cd $(srctree)/$(src) && find * -name '*.yaml')
DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 35704c2..3ce4dd5 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -115,7 +115,7 @@ endif
targets += vmlinux.its.S
quiet_cmd_its_cat = CAT $@
- cmd_its_cat = cat $(filter-out $(PHONY), $^) >$@
+ cmd_its_cat = cat $(real-prereqs) >$@
$(obj)/vmlinux.its.S: $(addprefix $(srctree)/arch/mips/$(PLATFORM)/,$(ITS_INPUTS)) FORCE
$(call if_changed,its_cat)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 0e8dadd..73d1f35 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -218,7 +218,7 @@ quiet_cmd_bootas = BOOTAS $@
cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
quiet_cmd_bootar = BOOTAR $@
- cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+ cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@
$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
$(call if_changed_dep,bootcc)
diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile
index b4d8a42..11ca879 100644
--- a/arch/s390/boot/Makefile
+++ b/arch/s390/boot/Makefile
@@ -58,7 +58,7 @@ $(obj)/compressed/vmlinux: $(obj)/startup.a FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
quiet_cmd_ar = AR $@
- cmd_ar = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(filter $(OBJECTS), $^)
+ cmd_ar = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(real-prereqs)
$(obj)/startup.a: $(OBJECTS) FORCE
$(call if_changed,ar)
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index 4463fa7..394377c 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -37,8 +37,7 @@ REALMODE_OBJS = $(addprefix $(obj)/,$(realmode-y))
sed-pasyms := -n -r -e 's/^([0-9a-fA-F]+) [ABCDGRSTVW] (.+)$$/pa_\2 = \2;/p'
quiet_cmd_pasyms = PASYMS $@
- cmd_pasyms = $(NM) $(filter-out FORCE,$^) | \
- sed $(sed-pasyms) | sort | uniq > $@
+ cmd_pasyms = $(NM) $(real-prereqs) | sed $(sed-pasyms) | sort | uniq > $@
targets += pasyms.h
$(obj)/pasyms.h: $(REALMODE_OBJS) FORCE
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 3081603..d93250b 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -24,6 +24,10 @@ depfile = $(subst $(comma),_,$(dot-target).d)
basetarget = $(basename $(notdir $@))
###
+# real prerequisites without phony targets
+real-prereqs = $(filter-out $(PHONY), $^)
+
+###
# Escape single quote for use in echo statements
escsq = $(subst $(squote),'\$(squote)',$1)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 681ab58..9800178 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -399,8 +399,7 @@ $(sort $(subdir-obj-y)): $(subdir-ym) ;
ifdef builtin-target
quiet_cmd_ar_builtin = AR $@
- cmd_ar_builtin = rm -f $@; \
- $(AR) rcSTP$(KBUILD_ARFLAGS) $@ $(filter $(real-obj-y), $^)
+ cmd_ar_builtin = rm -f $@; $(AR) rcSTP$(KBUILD_ARFLAGS) $@ $(real-prereqs)
$(builtin-target): $(real-obj-y) FORCE
$(call if_changed,ar_builtin)
@@ -428,7 +427,7 @@ ifdef lib-target
quiet_cmd_link_l_target = AR $@
# lib target archives do get a symbol table and index
-cmd_link_l_target = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(lib-y)
+cmd_link_l_target = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(real-prereqs)
$(lib-target): $(lib-y) FORCE
$(call if_changed,link_l_target)
@@ -453,6 +452,10 @@ targets += $(obj)/lib-ksyms.o
endif
+# NOTE:
+# Do not replace $(filter %.o,^) with $(real-prereqs). When a single object
+# module is turned into a multi object module, $^ will contain header file
+# dependencies recorded in the .*.cmd file.
quiet_cmd_link_multi-m = LD [M] $@
cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^) $(cmd_secanalysis)
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index ebaa348..c6fc295 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -231,7 +231,7 @@ $(obj)/%: $(src)/%_shipped
# ---------------------------------------------------------------------------
quiet_cmd_ld = LD $@
-cmd_ld = $(LD) $(ld_flags) $(filter-out FORCE,$^) -o $@
+ cmd_ld = $(LD) $(ld_flags) $(real-prereqs) -o $@
# Objcopy
# ---------------------------------------------------------------------------
@@ -243,7 +243,7 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
# ---------------------------------------------------------------------------
quiet_cmd_gzip = GZIP $@
- cmd_gzip = cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@
+ cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@
# DTC
# ---------------------------------------------------------------------------
@@ -321,7 +321,7 @@ dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
# append the size as a 32-bit littleendian number as gzip does.
size_append = printf $(shell \
dec_size=0; \
-for F in $(filter-out FORCE,$^); do \
+for F in $(real-prereqs); do \
fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
dec_size=$$(expr $$dec_size + $$fsize); \
done; \
@@ -335,19 +335,19 @@ printf "%08x\n" $$dec_size | \
)
quiet_cmd_bzip2 = BZIP2 $@
- cmd_bzip2 = (cat $(filter-out FORCE,$^) | bzip2 -9 && $(size_append)) > $@
+ cmd_bzip2 = (cat $(real-prereqs) | bzip2 -9 && $(size_append)) > $@
# Lzma
# ---------------------------------------------------------------------------
quiet_cmd_lzma = LZMA $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | lzma -9 && $(size_append)) > $@
+ cmd_lzma = (cat $(real-prereqs) | lzma -9 && $(size_append)) > $@
quiet_cmd_lzo = LZO $@
- cmd_lzo = (cat $(filter-out FORCE,$^) | lzop -9 && $(size_append)) > $@
+ cmd_lzo = (cat $(real-prereqs) | lzop -9 && $(size_append)) > $@
quiet_cmd_lz4 = LZ4 $@
- cmd_lz4 = (cat $(filter-out FORCE,$^) | lz4c -l -c1 stdin stdout && \
+ cmd_lz4 = (cat $(real-prereqs) | lz4c -l -c1 stdin stdout && \
$(size_append)) > $@
# U-Boot mkimage
@@ -390,11 +390,11 @@ quiet_cmd_uimage = UIMAGE $@
# big dictionary would increase the memory usage too much in the multi-call
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN $@
-cmd_xzkern = (cat $(filter-out FORCE,$^) | \
+ cmd_xzkern = (cat $(real-prereqs) | \
sh $(srctree)/scripts/xz_wrap.sh && $(size_append)) > $@
quiet_cmd_xzmisc = XZMISC $@
-cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
+ cmd_xzmisc = (cat $(real-prereqs) | \
xz --check=crc32 --lzma2=dict=1MiB) > $@
# ASM offsets
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 7d4af0d0..c0b7f52 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -122,7 +122,7 @@ quiet_cmd_ld_ko_o = LD [M] $@
cmd_ld_ko_o = \
$(LD) -r $(KBUILD_LDFLAGS) \
$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
- -o $@ $(filter-out FORCE,$^) ; \
+ -o $@ $(real-prereqs) ; \
$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
$(modules): %.ko :%.o %.mod.o FORCE
--
2.7.4
On Thu, Jan 17, 2019 at 07:02:42PM +0900, Masahiro Yamada wrote:
> When I was refactoring cmd_ar_builtin in scripts/Makefile.build,
> I noticed the build breakage of s390.
>
> Some Makefiles of s390 add extra dependencies to built-in.a;
> built-in.a depends on timestamp files *.o.chkbss, but $(AR) does
> not want to include them into built-in.a.
>
> Insert a phony target 'chkbss' in between so that $(AR) can take
> $(filter-out $(PHONY), $^) as input.
>
> While I was here, I refactored Makefile.chkbss a little bit.
>
> Signed-off-by: Masahiro Yamada <[email protected]>
> ---
> I want Acked-by from a s390 maintainer so this series can go
> into kbuild tree.
>
> Changes in v2:
> - New patch
>
> arch/s390/boot/Makefile | 4 ++--
> arch/s390/boot/compressed/Makefile | 4 ++--
> arch/s390/scripts/Makefile.chkbss | 25 +++++++++++--------------
> 3 files changed, 15 insertions(+), 18 deletions(-)
Tested and still seems to work like before.
Acked-by: Heiko Carstens <[email protected]>
On Thu, Jan 17, 2019 at 07:02:43PM +0900, Masahiro Yamada wrote:
> In Kbuild, if_changed and friends must have FORCE as a prerequisite.
>
> Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
> pattern to get the names of all the prerequisites except phony targets.
>
> Add real-prereqs as a shorthand.
>
> Note:
> We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
> include auto-generated dependencies from the .*.cmd file when a single
> object module is changed into a multi object module. Refer to commit
> 69ea912fda74 ("kbuild: remove unneeded link_multi_deps"). I added some
> comment to avoid accidental breakage.
>
> Signed-off-by: Masahiro Yamada <[email protected]>
> ---
>
> The patch context depends on some other ones.
> Please use 'git am -C1' if you want to test this
> on Linus' tree.
>
>
> Changes in v2:
> - clean up arch/s390/boot/Makefile as well
>
> Documentation/devicetree/bindings/Makefile | 2 +-
Acked-by: Rob Herring <[email protected]>
> arch/mips/boot/Makefile | 2 +-
> arch/powerpc/boot/Makefile | 2 +-
> arch/s390/boot/Makefile | 2 +-
> arch/x86/realmode/rm/Makefile | 3 +--
> scripts/Kbuild.include | 4 ++++
> scripts/Makefile.build | 9 ++++++---
> scripts/Makefile.lib | 18 +++++++++---------
> scripts/Makefile.modpost | 2 +-
> 9 files changed, 25 insertions(+), 19 deletions(-)
On Thu, Jan 17, 2019 at 7:03 PM Masahiro Yamada
<[email protected]> wrote:
>
> All the callers of size_append pass $(filter-out FORCE,$^).
> Move $(filter-out FORCE,$^) to the definition of size_append.
>
> This makes the callers cleaner because $(call ...) is unneeded
> for a macro with no argument.
>
> Signed-off-by: Masahiro Yamada <[email protected]>
> ---
Series, applied to linux-kbuild.
> Changes in v2: None
>
> scripts/Makefile.lib | 18 +++++++-----------
> 1 file changed, 7 insertions(+), 11 deletions(-)
>
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index ecad15b..ebaa348 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -321,7 +321,7 @@ dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
> # append the size as a 32-bit littleendian number as gzip does.
> size_append = printf $(shell \
> dec_size=0; \
> -for F in $1; do \
> +for F in $(filter-out FORCE,$^); do \
> fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F); \
> dec_size=$$(expr $$dec_size + $$fsize); \
> done; \
> @@ -335,23 +335,20 @@ printf "%08x\n" $$dec_size | \
> )
>
> quiet_cmd_bzip2 = BZIP2 $@
> -cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
> - bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@
> + cmd_bzip2 = (cat $(filter-out FORCE,$^) | bzip2 -9 && $(size_append)) > $@
>
> # Lzma
> # ---------------------------------------------------------------------------
>
> quiet_cmd_lzma = LZMA $@
> -cmd_lzma = (cat $(filter-out FORCE,$^) | \
> - lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@
> + cmd_lzma = (cat $(filter-out FORCE,$^) | lzma -9 && $(size_append)) > $@
>
> quiet_cmd_lzo = LZO $@
> -cmd_lzo = (cat $(filter-out FORCE,$^) | \
> - lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@
> + cmd_lzo = (cat $(filter-out FORCE,$^) | lzop -9 && $(size_append)) > $@
>
> quiet_cmd_lz4 = LZ4 $@
> -cmd_lz4 = (cat $(filter-out FORCE,$^) | \
> - lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@
> + cmd_lz4 = (cat $(filter-out FORCE,$^) | lz4c -l -c1 stdin stdout && \
> + $(size_append)) > $@
>
> # U-Boot mkimage
> # ---------------------------------------------------------------------------
> @@ -394,8 +391,7 @@ quiet_cmd_uimage = UIMAGE $@
> # decompression mode. A BCJ filter isn't used either.
> quiet_cmd_xzkern = XZKERN $@
> cmd_xzkern = (cat $(filter-out FORCE,$^) | \
> - sh $(srctree)/scripts/xz_wrap.sh && \
> - $(call size_append, $(filter-out FORCE,$^))) > $@
> + sh $(srctree)/scripts/xz_wrap.sh && $(size_append)) > $@
>
> quiet_cmd_xzmisc = XZMISC $@
> cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
> --
> 2.7.4
>
--
Best Regards
Masahiro Yamada