2019-04-12 07:33:32

by FLAVIO SULIGOI

[permalink] [raw]
Subject: [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

- ssp_clk = 50 MHz
- dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

- 25 MHz for PXA25x_SSP and CE4100_SSP
- 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <[email protected]>
Reviewed-by: Jarkko Nikula <[email protected]>
---

v2: - simplify the code using "DIV_ROUND_UP"
v1: - first version

drivers/spi/spi-pxa2xx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index f7068cc..a35fdcb 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)

rate = min_t(int, ssp_clk, rate);

+ /*
+ * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+ * that the SSP transmission rate can be greater than the device rate
+ */
if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
- return (ssp_clk / (2 * rate) - 1) & 0xff;
+ return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
else
- return (ssp_clk / rate - 1) & 0xfff;
+ return (DIV_ROUND_UP(ssp_clk, rate) - 1) & 0xfff;
}

static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
--
2.7.4


2019-04-12 12:37:43

by Jarkko Nikula

[permalink] [raw]
Subject: Re: [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation

On 4/12/19 10:32 AM, Flavio Suligoi wrote:
> Calculate the divisor for the SCR (Serial Clock Rate), avoiding
> that the SSP transmission rate can be greater than the device rate.
>
> When the division between the SSP clock and the device rate generates
> a reminder, we have to increment by one the divisor.
> In this way the resulting SSP clock will never be greater than the
> device SPI max frequency.
>
> For example, with:
>
> - ssp_clk = 50 MHz
> - dev freq = 15 MHz
>
> without this patch the SSP clock will be greater than 15 MHz:
>
> - 25 MHz for PXA25x_SSP and CE4100_SSP
> - 16,56 MHz for the others
>
> Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
> so the max rate of the SPI device clock is respected.
>
> Signed-off-by: Flavio Suligoi <[email protected]>
> Reviewed-by: Jarkko Nikula <[email protected]>
> ---
>
> v2: - simplify the code using "DIV_ROUND_UP"
> v1: - first version
>
> drivers/spi/spi-pxa2xx.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
> index f7068cc..a35fdcb 100644
> --- a/drivers/spi/spi-pxa2xx.c
> +++ b/drivers/spi/spi-pxa2xx.c
> @@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
>
> rate = min_t(int, ssp_clk, rate);
>
> + /*
> + * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
> + * that the SSP transmission rate can be greater than the device rate
> + */
> if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
> - return (ssp_clk / (2 * rate) - 1) & 0xff;
> + return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
> else
> - return (ssp_clk / rate - 1) & 0xfff;
> + return (DIV_ROUND_UP(ssp_clk, rate) - 1) & 0xfff;
> }
>
Reviewed-by: Jarkko Nikula <[email protected]>

2019-04-15 08:54:53

by Mark Brown

[permalink] [raw]
Subject: Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree

The patch

spi: pxa2xx: fix SCR (divisor) calculation

has been applied to the spi tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.1

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From bf0c999f7f0e8934c8db8261fb67a38770fffac2 Mon Sep 17 00:00:00 2001
From: Flavio Suligoi <[email protected]>
Date: Fri, 12 Apr 2019 09:32:19 +0200
Subject: [PATCH] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

- ssp_clk = 50 MHz
- dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

- 25 MHz for PXA25x_SSP and CE4100_SSP
- 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <[email protected]>
Reviewed-by: Jarkko Nikula <[email protected]>
Reviewed-by: Jarkko Nikula <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/spi/spi-pxa2xx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..d2076f2f468f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)

rate = min_t(int, ssp_clk, rate);

+ /*
+ * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+ * that the SSP transmission rate can be greater than the device rate
+ */
if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
- return (ssp_clk / (2 * rate) - 1) & 0xff;
+ return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
else
- return (ssp_clk / rate - 1) & 0xfff;
+ return (DIV_ROUND_UP(ssp_clk, rate) - 1) & 0xfff;
}

static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
--
2.20.1

2019-05-02 02:20:59

by Mark Brown

[permalink] [raw]
Subject: Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree

The patch

spi: pxa2xx: fix SCR (divisor) calculation

has been applied to the spi tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 29f2133717c527f492933b0622a4aafe0b3cbe9e Mon Sep 17 00:00:00 2001
From: Flavio Suligoi <[email protected]>
Date: Fri, 12 Apr 2019 09:32:19 +0200
Subject: [PATCH] spi: pxa2xx: fix SCR (divisor) calculation

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

- ssp_clk = 50 MHz
- dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

- 25 MHz for PXA25x_SSP and CE4100_SSP
- 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <[email protected]>
Reviewed-by: Jarkko Nikula <[email protected]>
Reviewed-by: Jarkko Nikula <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/spi/spi-pxa2xx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b6ddba833d02..d2076f2f468f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -884,10 +884,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)

rate = min_t(int, ssp_clk, rate);

+ /*
+ * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+ * that the SSP transmission rate can be greater than the device rate
+ */
if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
- return (ssp_clk / (2 * rate) - 1) & 0xff;
+ return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
else
- return (ssp_clk / rate - 1) & 0xfff;
+ return (DIV_ROUND_UP(ssp_clk, rate) - 1) & 0xfff;
}

static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
--
2.20.1