2019-06-19 12:32:43

by Fabrice Gasnier

Subject: [PATCH 1/5] dt-bindings: iio: adc: stm32: add missing vdda supply

Add missing vdda-supply, analog power supply, to STM32 ADC. It's required
to properly supply the ADC.

Fixes: 841fcea454fe ("Documentation: dt-bindings: Document STM32 ADC DT
bindings")

Signed-off-by: Fabrice Gasnier <[email protected]>
---
Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 8346bcb..93a0bd2 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -38,6 +38,7 @@ Required properties:
It's required on stm32h7.
- clock-names: Must be "adc" and/or "bus" depending on part used.
- interrupt-controller: Identifies the controller node as interrupt-parent
+- vdda-supply: Phandle to the vdda input analog voltage.
- vref-supply: Phandle to the vref input analog reference voltage.
- #interrupt-cells = <1>;
- #address-cells = <1>;
--
2.7.4

2019-06-22 09:38:28

by Jonathan Cameron

Subject: Re: [PATCH 1/5] dt-bindings: iio: adc: stm32: add missing vdda supply

On Wed, 19 Jun 2019 14:29:54 +0200
Fabrice Gasnier <[email protected]> wrote:

> Add missing vdda-supply, analog power supply, to STM32 ADC. It's required
> to properly supply the ADC.
>
> Fixes: 841fcea454fe ("Documentation: dt-bindings: Document STM32 ADC DT
> bindings")
>
> Signed-off-by: Fabrice Gasnier <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to ignore completely.

thanks,

Jonathan

> ---
> Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> index 8346bcb..93a0bd2 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> @@ -38,6 +38,7 @@ Required properties:
> It's required on stm32h7.
> - clock-names: Must be "adc" and/or "bus" depending on part used.
> - interrupt-controller: Identifies the controller node as interrupt-parent
> +- vdda-supply: Phandle to the vdda input analog voltage.
> - vref-supply: Phandle to the vref input analog reference voltage.
> - #interrupt-cells = <1>;
> - #address-cells = <1>;