2019-06-27 08:03:12

by Jitao Shi

[permalink] [raw]
Subject: [v5 2/7] drm/mediatek: fixes CMDQ reg address of mt8173 is different with mt2701

Config the different CMDQ reg address in driver data.

Signed-off-by: Jitao Shi <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 595b3b047c7b..bd37d823c762 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -131,7 +131,6 @@
#define VM_CMD_EN BIT(0)
#define TS_VFP_EN BIT(5)

-#define DSI_CMDQ0 0x180
#define CONFIG (0xff << 0)
#define SHORT_PACKET 0
#define LONG_PACKET 2
@@ -156,6 +155,10 @@

struct phy;

+struct mtk_dsi_driver_data {
+ const u32 reg_cmdq_off;
+};
+
struct mtk_dsi {
struct mtk_ddp_comp ddp_comp;
struct device *dev;
@@ -182,6 +185,7 @@ struct mtk_dsi {
bool enabled;
u32 irq_data;
wait_queue_head_t irq_wait_queue;
+ const struct mtk_dsi_driver_data *driver_data;
};

static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
@@ -934,6 +938,7 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
const char *tx_buf = msg->tx_buf;
u8 config, cmdq_size, cmdq_off, type = msg->type;
u32 reg_val, cmdq_mask, i;
+ u32 reg_cmdq_off = dsi->driver_data->reg_cmdq_off;

if (MTK_DSI_HOST_IS_READ(type))
config = BTA;
@@ -953,9 +958,11 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
}

for (i = 0; i < msg->tx_len; i++)
- writeb(tx_buf[i], dsi->regs + DSI_CMDQ0 + cmdq_off + i);
+ mtk_dsi_mask(dsi, (reg_cmdq_off + cmdq_off + i) & (~0x3U),
+ (0xffUL << (((i + cmdq_off) & 3U) * 8U)),
+ tx_buf[i] << (((i + cmdq_off) & 3U) * 8U));

- mtk_dsi_mask(dsi, DSI_CMDQ0, cmdq_mask, reg_val);
+ mtk_dsi_mask(dsi, reg_cmdq_off, cmdq_mask, reg_val);
mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, cmdq_size);
}

@@ -1099,6 +1106,8 @@ static int mtk_dsi_probe(struct platform_device *pdev)
if (ret)
goto err_unregister_host;

+ dsi->driver_data = of_device_get_match_data(dev);
+
dsi->engine_clk = devm_clk_get(dev, "engine");
if (IS_ERR(dsi->engine_clk)) {
ret = PTR_ERR(dsi->engine_clk);
@@ -1192,9 +1201,19 @@ static int mtk_dsi_remove(struct platform_device *pdev)
return 0;
}

+static const struct mtk_dsi_driver_data mt8173_dsi_driver_data = {
+ .reg_cmdq_off = 0x200,
+};
+
+static const struct mtk_dsi_driver_data mt2701_dsi_driver_data = {
+ .reg_cmdq_off = 0x180,
+};
+
static const struct of_device_id mtk_dsi_of_match[] = {
- { .compatible = "mediatek,mt2701-dsi" },
- { .compatible = "mediatek,mt8173-dsi" },
+ { .compatible = "mediatek,mt2701-dsi",
+ .data = &mt2701_dsi_driver_data },
+ { .compatible = "mediatek,mt8173-dsi",
+ .data = &mt8173_dsi_driver_data },
{ },
};

--
2.21.0


2019-06-28 05:57:58

by CK Hu (胡俊光)

[permalink] [raw]
Subject: Re: [v5 2/7] drm/mediatek: fixes CMDQ reg address of mt8173 is different with mt2701

Hi, Jitao:

On Thu, 2019-06-27 at 16:01 +0800, Jitao Shi wrote:
> Config the different CMDQ reg address in driver data.
>
> Signed-off-by: Jitao Shi <[email protected]>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 29 ++++++++++++++++++++++++-----
> 1 file changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 595b3b047c7b..bd37d823c762 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -131,7 +131,6 @@
> #define VM_CMD_EN BIT(0)
> #define TS_VFP_EN BIT(5)
>
> -#define DSI_CMDQ0 0x180
> #define CONFIG (0xff << 0)
> #define SHORT_PACKET 0
> #define LONG_PACKET 2
> @@ -156,6 +155,10 @@
>
> struct phy;
>
> +struct mtk_dsi_driver_data {
> + const u32 reg_cmdq_off;
> +};
> +
> struct mtk_dsi {
> struct mtk_ddp_comp ddp_comp;
> struct device *dev;
> @@ -182,6 +185,7 @@ struct mtk_dsi {
> bool enabled;
> u32 irq_data;
> wait_queue_head_t irq_wait_queue;
> + const struct mtk_dsi_driver_data *driver_data;
> };
>
> static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
> @@ -934,6 +938,7 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
> const char *tx_buf = msg->tx_buf;
> u8 config, cmdq_size, cmdq_off, type = msg->type;
> u32 reg_val, cmdq_mask, i;
> + u32 reg_cmdq_off = dsi->driver_data->reg_cmdq_off;
>
> if (MTK_DSI_HOST_IS_READ(type))
> config = BTA;
> @@ -953,9 +958,11 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
> }
>
> for (i = 0; i < msg->tx_len; i++)
> - writeb(tx_buf[i], dsi->regs + DSI_CMDQ0 + cmdq_off + i);
> + mtk_dsi_mask(dsi, (reg_cmdq_off + cmdq_off + i) & (~0x3U),
> + (0xffUL << (((i + cmdq_off) & 3U) * 8U)),
> + tx_buf[i] << (((i + cmdq_off) & 3U) * 8U));

If writeb() has the same problem in MT2701, I think we need a patch that
just change writeb() to mtk_dsi_mask(), and then a patch to fix CMDQ reg
address of MT8173. So break this patch into two patches.

Regards,
CK

>
> - mtk_dsi_mask(dsi, DSI_CMDQ0, cmdq_mask, reg_val);
> + mtk_dsi_mask(dsi, reg_cmdq_off, cmdq_mask, reg_val);
> mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, cmdq_size);
> }
>
> @@ -1099,6 +1106,8 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> if (ret)
> goto err_unregister_host;
>
> + dsi->driver_data = of_device_get_match_data(dev);
> +
> dsi->engine_clk = devm_clk_get(dev, "engine");
> if (IS_ERR(dsi->engine_clk)) {
> ret = PTR_ERR(dsi->engine_clk);
> @@ -1192,9 +1201,19 @@ static int mtk_dsi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct mtk_dsi_driver_data mt8173_dsi_driver_data = {
> + .reg_cmdq_off = 0x200,
> +};
> +
> +static const struct mtk_dsi_driver_data mt2701_dsi_driver_data = {
> + .reg_cmdq_off = 0x180,
> +};
> +
> static const struct of_device_id mtk_dsi_of_match[] = {
> - { .compatible = "mediatek,mt2701-dsi" },
> - { .compatible = "mediatek,mt8173-dsi" },
> + { .compatible = "mediatek,mt2701-dsi",
> + .data = &mt2701_dsi_driver_data },
> + { .compatible = "mediatek,mt8173-dsi",
> + .data = &mt8173_dsi_driver_data },
> { },
> };
>