2019-11-05 13:36:59

by Fabrice Gasnier

[permalink] [raw]
Subject: [PATCH 0/4] Update PWM support on stm32mp157 boards

This series update PWM support on stm32mp157c-ev1 and stm32mp157a-dk1
boards, e.g. add pinmuxing and use them in board device-tree.
- Add PWM sleep pins that can be used on stm32mp157c-ev1 board
- Add PWM pins that can be used on stm32mp157a-dk1 board
- Add PWM pinctrl sleep state on stm32mp157c-ev1 board
- Add PWM support on stm32mp157a-dk1 board

Fabrice Gasnier (4):
ARM: dts: stm32: add pwm sleep pin muxing for stm32mp157c-ed1
ARM: dts: stm32: add pwm pin muxing for stm32mp157a-dk1
ARM: dts: stm32: add pwm sleep pins to stm32mp157c-ev1
ARM: dts: stm32: add support for PWM on stm32mp157a-dk1

arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 99 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157a-dk1.dts | 85 ++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 9 ++-
3 files changed, 190 insertions(+), 3 deletions(-)

--
2.7.4


2019-11-15 10:40:26

by Alexandre Torgue

[permalink] [raw]
Subject: Re: [PATCH 0/4] Update PWM support on stm32mp157 boards

Hi Fabrice

On 11/5/19 1:52 PM, Fabrice Gasnier wrote:
> This series update PWM support on stm32mp157c-ev1 and stm32mp157a-dk1
> boards, e.g. add pinmuxing and use them in board device-tree.
> - Add PWM sleep pins that can be used on stm32mp157c-ev1 board
> - Add PWM pins that can be used on stm32mp157a-dk1 board
> - Add PWM pinctrl sleep state on stm32mp157c-ev1 board
> - Add PWM support on stm32mp157a-dk1 board
>
> Fabrice Gasnier (4):
> ARM: dts: stm32: add pwm sleep pin muxing for stm32mp157c-ed1
> ARM: dts: stm32: add pwm pin muxing for stm32mp157a-dk1
> ARM: dts: stm32: add pwm sleep pins to stm32mp157c-ev1
> ARM: dts: stm32: add support for PWM on stm32mp157a-dk1
>
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 99 +++++++++++++++++++++++++++++++
> arch/arm/boot/dts/stm32mp157a-dk1.dts | 85 ++++++++++++++++++++++++++
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 9 ++-
> 3 files changed, 190 insertions(+), 3 deletions(-)
>

Series applied on stm32-next. I just rename patch1 to be more coherent
with your explanation done in cover letter.

Regards
Alex