add write_s function in cmdq helper functions which
writes a constant value to address with large dma
access support.
Signed-off-by: Dennis YC Hsieh <[email protected]>
Reviewed-by: CK Hu <[email protected]>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 26 ++++++++++++++++++++++++++
include/linux/soc/mediatek/mtk-cmdq.h | 14 ++++++++++++++
2 files changed, 40 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 03c129230cd7..a9ebbabb7439 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -269,6 +269,32 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
}
EXPORT_SYMBOL(cmdq_pkt_write_s);
+int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u32 value, u32 mask)
+{
+ struct cmdq_instruction inst = { {0} };
+ int err;
+
+ if (mask != U32_MAX) {
+ inst.op = CMDQ_CODE_MASK;
+ inst.mask = ~mask;
+ err = cmdq_pkt_append_command(pkt, inst);
+ if (err < 0)
+ return err;
+
+ inst.op = CMDQ_CODE_WRITE_S_MASK;
+ } else {
+ inst.op = CMDQ_CODE_WRITE_S;
+ }
+
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.value = value;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_value);
+
int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
{
struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 01b4184af310..fec292aac83c 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -135,6 +135,20 @@ int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low,
int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx, u32 mask);
+/**
+ * cmdq_pkt_write_s_value() - append write_s command with mask to the CMDQ
+ * packet which write value to a physical address
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal regisger ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @value: the specified target value
+ * @mask: the specified target mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u32 value, u32 mask);
+
/**
* cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
* @pkt: the CMDQ packet
--
2.18.0