2020-04-30 09:30:59

by Fabrice Gasnier

Subject: [PATCH] iio: adc: stm32-adc: fix device used to request dma

DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink

Fix this by using device struct from platform device to request dma chan.

Fixes: 2763ea0585c99 ("iio: adc: stm32: add optional dma support")

Signed-off-by: Fabrice Gasnier <[email protected]>
---
drivers/iio/adc/stm32-adc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index ae622ee..dfc3a30 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1812,18 +1812,18 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
return 0;
}

-static int stm32_adc_dma_request(struct iio_dev *indio_dev)
+static int stm32_adc_dma_request(struct device *dev, struct iio_dev *indio_dev)
{
struct stm32_adc *adc = iio_priv(indio_dev);
struct dma_slave_config config;
int ret;

- adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+ adc->dma_chan = dma_request_chan(dev, "rx");
if (IS_ERR(adc->dma_chan)) {
ret = PTR_ERR(adc->dma_chan);
if (ret != -ENODEV) {
if (ret != -EPROBE_DEFER)
- dev_err(&indio_dev->dev,
+ dev_err(dev,
"DMA channel request failed with %d\n",
ret);
return ret;
@@ -1930,7 +1930,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
if (ret < 0)
return ret;

- ret = stm32_adc_dma_request(indio_dev);
+ ret = stm32_adc_dma_request(dev, indio_dev);
if (ret < 0)
return ret;

--
2.7.4

2020-04-30 09:31:34

by Fabrice Gasnier

Subject: [PATCH] iio: adc: stm32-dfsdm: fix device used to request dma

DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink

Fix this by using device struct from platform device to request dma chan.

Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone")

Signed-off-by: Fabrice Gasnier <[email protected]>
---
drivers/iio/adc/stm32-dfsdm-adc.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 76a60d9..506bf51 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -62,7 +62,7 @@ enum sd_converter_type {

struct stm32_dfsdm_dev_data {
int type;
- int (*init)(struct iio_dev *indio_dev);
+ int (*init)(struct device *dev, struct iio_dev *indio_dev);
unsigned int num_channels;
const struct regmap_config *regmap_cfg;
};
@@ -1365,11 +1365,12 @@ static void stm32_dfsdm_dma_release(struct iio_dev *indio_dev)
}
}

-static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
+static int stm32_dfsdm_dma_request(struct device *dev,
+ struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);

- adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
+ adc->dma_chan = dma_request_chan(dev, "rx");
if (IS_ERR(adc->dma_chan)) {
int ret = PTR_ERR(adc->dma_chan);

@@ -1425,7 +1426,7 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
&adc->dfsdm->ch_list[ch->channel]);
}

-static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
+static int stm32_dfsdm_audio_init(struct device *dev, struct iio_dev *indio_dev)
{
struct iio_chan_spec *ch;
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
@@ -1452,10 +1453,10 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
indio_dev->num_channels = 1;
indio_dev->channels = ch;

- return stm32_dfsdm_dma_request(indio_dev);
+ return stm32_dfsdm_dma_request(dev, indio_dev);
}

-static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
+static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev)
{
struct iio_chan_spec *ch;
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
@@ -1499,17 +1500,17 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
init_completion(&adc->completion);

/* Optionally request DMA */
- ret = stm32_dfsdm_dma_request(indio_dev);
+ ret = stm32_dfsdm_dma_request(dev, indio_dev);
if (ret) {
if (ret != -ENODEV) {
if (ret != -EPROBE_DEFER)
- dev_err(&indio_dev->dev,
+ dev_err(dev,
"DMA channel request failed with %d\n",
ret);
return ret;
}

- dev_dbg(&indio_dev->dev, "No DMA support\n");
+ dev_dbg(dev, "No DMA support\n");
return 0;
}

@@ -1622,7 +1623,7 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
adc->dfsdm->fl_list[adc->fl_id].sync_mode = val;

adc->dev_data = dev_data;
- ret = dev_data->init(iio);
+ ret = dev_data->init(dev, iio);
if (ret < 0)
return ret;

--
2.7.4

2020-05-03 13:19:38

by Jonathan Cameron

Subject: Re: [PATCH] iio: adc: stm32-dfsdm: fix device used to request dma

On Thu, 30 Apr 2020 11:28:46 +0200
Fabrice Gasnier <[email protected]> wrote:

> DMA channel request should use device struct from platform device struct.
> Currently it's using iio device struct. But at this stage when probing,
> device struct isn't yet registered (e.g. device_register is done in
> iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
> symlinks between DMA channels and slaves"), a warning message is printed
> as the links in sysfs can't be created, due to device isn't yet registered:
> - Cannot create DMA slave symlink
> - Cannot create DMA dma:rx symlink
>
> Fix this by using device struct from platform device to request dma chan.
>
> Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone")
>
> Signed-off-by: Fabrice Gasnier <[email protected]>

Both applied to the fixes-togreg branch of iio.git and marked for stable.

THanks,

Jonathan

> ---
> drivers/iio/adc/stm32-dfsdm-adc.c | 21 +++++++++++----------
> 1 file changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
> index 76a60d9..506bf51 100644
> --- a/drivers/iio/adc/stm32-dfsdm-adc.c
> +++ b/drivers/iio/adc/stm32-dfsdm-adc.c
> @@ -62,7 +62,7 @@ enum sd_converter_type {
>
> struct stm32_dfsdm_dev_data {
> int type;
> - int (*init)(struct iio_dev *indio_dev);
> + int (*init)(struct device *dev, struct iio_dev *indio_dev);
> unsigned int num_channels;
> const struct regmap_config *regmap_cfg;
> };
> @@ -1365,11 +1365,12 @@ static void stm32_dfsdm_dma_release(struct iio_dev *indio_dev)
> }
> }
>
> -static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
> +static int stm32_dfsdm_dma_request(struct device *dev,
> + struct iio_dev *indio_dev)
> {
> struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
>
> - adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
> + adc->dma_chan = dma_request_chan(dev, "rx");
> if (IS_ERR(adc->dma_chan)) {
> int ret = PTR_ERR(adc->dma_chan);
>
> @@ -1425,7 +1426,7 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
> &adc->dfsdm->ch_list[ch->channel]);
> }
>
> -static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
> +static int stm32_dfsdm_audio_init(struct device *dev, struct iio_dev *indio_dev)
> {
> struct iio_chan_spec *ch;
> struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> @@ -1452,10 +1453,10 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
> indio_dev->num_channels = 1;
> indio_dev->channels = ch;
>
> - return stm32_dfsdm_dma_request(indio_dev);
> + return stm32_dfsdm_dma_request(dev, indio_dev);
> }
>
> -static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
> +static int stm32_dfsdm_adc_init(struct device *dev, struct iio_dev *indio_dev)
> {
> struct iio_chan_spec *ch;
> struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
> @@ -1499,17 +1500,17 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
> init_completion(&adc->completion);
>
> /* Optionally request DMA */
> - ret = stm32_dfsdm_dma_request(indio_dev);
> + ret = stm32_dfsdm_dma_request(dev, indio_dev);
> if (ret) {
> if (ret != -ENODEV) {
> if (ret != -EPROBE_DEFER)
> - dev_err(&indio_dev->dev,
> + dev_err(dev,
> "DMA channel request failed with %d\n",
> ret);
> return ret;
> }
>
> - dev_dbg(&indio_dev->dev, "No DMA support\n");
> + dev_dbg(dev, "No DMA support\n");
> return 0;
> }
>
> @@ -1622,7 +1623,7 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
> adc->dfsdm->fl_list[adc->fl_id].sync_mode = val;
>
> adc->dev_data = dev_data;
> - ret = dev_data->init(iio);
> + ret = dev_data->init(dev, iio);
> if (ret < 0)
> return ret;
>