This series adds support for the Synopsis 7nm HSPHY USB driver being
used in QCOM chipsets. The HSPHY register map differs compared to
other PHY revisions. In addition, modifications and updates are done
to the QMP driver to add new registers/offsets, and to update the
initialization sequence for enabling the SSUSB path on SM8150.
Changes in v8:
- Fix checkpatch warnings about characters per line.
- Rebase to linux-phy/next branch
Reviewed-by: Vinod Koul <[email protected]>
Changes in v7:
- Use _relaxed() variants for writel/readl calls in
phy-qcom-snps-femto-v2.c
- Remove comments in the phy init function
- Use devm_platform_ioremap_resource instead of devm_ioremap_resource
- Fix chipset naming in Kconfig
- Address minor fixups in the YAML file (remove status in example, fix
"Hi-speed" to "High-speed", add a newline at the end)
Changes in v6:
- Addressed coding style errors in phy-qcom-snps-femto-v2.c
Changes in v5:
- Reorganize IF check for when to use the proper PWRDOWN CTRL offset
- Rename UFS specific offset definitions in the QMP PHY driver to clearly
denote they are UFS specific
- Rename the phy-qcom-snps-7nm driver to phy-qcom-snps-femto-v2
Changes in v4:
- Fix POWERDOWN offset for QMP PHY exit routine, and check for
has_phy_dp_com_ctrl instead of !has_phy_com_ctrl
Changes in v3:
- Use devm_reset_control_get_exclusive instead of referencing index for
reset handle
Changes in v2:
- Fixed YAML errors caught by dt_binding_check
Jack Pham (1):
phy: qcom-qmp: Add SM8150 QMP USB3 PHY support
Wesley Cheng (4):
dt-bindings: phy: Add binding for qcom,usb-snps-femto-v2
phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs
phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB
phy: qcom-qmp: Rename UFS PCS QMP v4 registers
.../bindings/phy/qcom,usb-snps-femto-v2.yaml | 77 ++++++
drivers/phy/qualcomm/Kconfig | 10 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-qmp.c | 196 +++++++++++++-
drivers/phy/qualcomm/phy-qcom-qmp.h | 238 +++++++++++++++--
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 287 +++++++++++++++++++++
6 files changed, 773 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
create mode 100644 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
On 04-05-20, 16:54, Wesley Cheng wrote:
> This series adds support for the Synopsis 7nm HSPHY USB driver being
> used in QCOM chipsets. The HSPHY register map differs compared to
> other PHY revisions. In addition, modifications and updates are done
> to the QMP driver to add new registers/offsets, and to update the
> initialization sequence for enabling the SSUSB path on SM8150.
Applied all, thanks.
Pls note the dt-binding patch had a trailing line at the end of file, I
have stripped that while applying.
--
~Vinod