Add jump function so that client can jump to any address which
contains instruction.
Signed-off-by: Dennis YC Hsieh <[email protected]>
Reviewed-by: CK Hu <[email protected]>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 13 +++++++++++++
include/linux/soc/mediatek/mtk-cmdq.h | 11 +++++++++++
2 files changed, 24 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ebcdd30cd783..5cf9e71b7900 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -13,6 +13,7 @@
#define CMDQ_POLL_ENABLE_MASK BIT(0)
#define CMDQ_EOC_IRQ_EN BIT(0)
#define CMDQ_REG_TYPE 1
+#define CMDQ_JUMP_RELATIVE 1
struct cmdq_instruction {
union {
@@ -391,6 +392,18 @@ int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
}
EXPORT_SYMBOL(cmdq_pkt_assign);
+int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr)
+{
+ struct cmdq_instruction inst = { {0} };
+
+ inst.op = CMDQ_CODE_JUMP;
+ inst.offset = CMDQ_JUMP_RELATIVE;
+ inst.value = addr >>
+ cmdq_mbox_shift(((struct cmdq_client *)pkt->cl)->chan);
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_jump);
+
int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
{
struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 703cffcd55bd..9494b293bad9 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -244,6 +244,17 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
*/
int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value);
+/**
+ * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE
+ * to execute an instruction that change current thread PC to
+ * a physical address which should contains more instruction.
+ * @pkt: the CMDQ packet
+ * @addr: physical address of target instruction buffer
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr);
+
/**
* cmdq_pkt_finalize() - Append EOC and jump command to pkt.
* @pkt: the CMDQ packet
--
2.18.0