Add videocc drivers for SM8150/SM8250 required to boot and use venus.
v2:
- fixed dt_binding_check/checkpatch warnings in SM8250 bindings
- added 19.2Mhz in SM8250 freq tbls for consistency with other videocc
Jonathan Marek (5):
dt-bindings: clock: combine qcom,sdm845-videocc and
qcom,sc7180-videocc
dt-bindings: clock: add SM8150 QCOM video clock bindings
dt-bindings: clock: add SM8250 QCOM video clock bindings
clk: qcom: add video clock controller driver for SM8150
clk: qcom: add video clock controller driver for SM8250
.../bindings/clock/qcom,sc7180-videocc.yaml | 65 ---
...,sdm845-videocc.yaml => qcom,videocc.yaml} | 22 +-
drivers/clk/qcom/Kconfig | 18 +
drivers/clk/qcom/Makefile | 2 +
drivers/clk/qcom/videocc-sm8150.c | 276 ++++++++++
drivers/clk/qcom/videocc-sm8250.c | 518 ++++++++++++++++++
.../dt-bindings/clock/qcom,videocc-sm8150.h | 25 +
.../dt-bindings/clock/qcom,videocc-sm8250.h | 42 ++
8 files changed, 898 insertions(+), 70 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
rename Documentation/devicetree/bindings/clock/{qcom,sdm845-videocc.yaml => qcom,videocc.yaml} (62%)
create mode 100644 drivers/clk/qcom/videocc-sm8150.c
create mode 100644 drivers/clk/qcom/videocc-sm8250.c
create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8150.h
create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8250.h
--
2.26.1
These two bindings are almost identical, so combine them into one. This
will make it easier to add the sm8150 and sm8250 videocc bindings.
Signed-off-by: Jonathan Marek <[email protected]>
---
.../bindings/clock/qcom,sc7180-videocc.yaml | 65 -------------------
...,sdm845-videocc.yaml => qcom,videocc.yaml} | 14 ++--
2 files changed, 9 insertions(+), 70 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
rename Documentation/devicetree/bindings/clock/{qcom,sdm845-videocc.yaml => qcom,videocc.yaml} (76%)
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
deleted file mode 100644
index 2feea2b91aa9..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
+++ /dev/null
@@ -1,65 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-videocc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Video Clock & Reset Controller Binding for SC7180
-
-maintainers:
- - Taniya Das <[email protected]>
-
-description: |
- Qualcomm video clock control module which supports the clocks, resets and
- power domains on SC7180.
-
- See also dt-bindings/clock/qcom,videocc-sc7180.h.
-
-properties:
- compatible:
- const: qcom,sc7180-videocc
-
- clocks:
- items:
- - description: Board XO source
-
- clock-names:
- items:
- - const: bi_tcxo
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
- - '#clock-cells'
- - '#reset-cells'
- - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,rpmh.h>
- clock-controller@ab00000 {
- compatible = "qcom,sc7180-videocc";
- reg = <0x0ab00000 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "bi_tcxo";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
similarity index 76%
rename from Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
rename to Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index f7a0cf53d5f0..17666425476f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -1,23 +1,27 @@
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
-$id: http://devicetree.org/schemas/clock/qcom,sdm845-videocc.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Qualcomm Video Clock & Reset Controller Binding for SDM845
+title: Qualcomm Video Clock & Reset Controller Binding
maintainers:
- Taniya Das <[email protected]>
description: |
Qualcomm video clock control module which supports the clocks, resets and
- power domains on SDM845.
+ power domains on SDM845/SC7180.
- See also dt-bindings/clock/qcom,videocc-sdm845.h.
+ See also:
+ dt-bindings/clock/qcom,videocc-sdm845.h
+ dt-bindings/clock/qcom,videocc-sc7180.h
properties:
compatible:
- const: qcom,sdm845-videocc
+ enum:
+ - qcom,sdm845-videocc
+ - qcom,sc7180-videocc
clocks:
items:
--
2.26.1
Add support for the video clock controller found on SM8250 based devices.
Derived from the downstream driver.
Signed-off-by: Jonathan Marek <[email protected]>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/videocc-sm8250.c | 518 ++++++++++++++++++++++++++++++
3 files changed, 528 insertions(+)
create mode 100644 drivers/clk/qcom/videocc-sm8250.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 40d7ee9886c9..95efa38211d5 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -453,6 +453,15 @@ config SM_VIDEOCC_8150
Say Y if you want to support video devices and functionality such as
video encode and decode.
+config SM_VIDEOCC_8250
+ tristate "SM8250 Video Clock Controller"
+ select SDM_GCC_8250
+ select QCOM_GDSC
+ help
+ Support for the video clock controller on SM8250 devices.
+ Say Y if you want to support video devices and functionality such as
+ video encode and decode.
+
config SPMI_PMIC_CLKDIV
tristate "SPMI PMIC clkdiv Support"
depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 6f4c580d2728..55fb20800b66 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
+obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
new file mode 100644
index 000000000000..a814d10945c4
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,videocc-sm8250.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "reset.h"
+#include "gdsc.h"
+
+enum {
+ P_BI_TCXO,
+ P_CHIP_SLEEP_CLK,
+ P_CORE_BI_PLL_TEST_SE,
+ P_VIDEO_PLL0_OUT_MAIN,
+ P_VIDEO_PLL1_OUT_MAIN,
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0[] = {
+ { .fw_name = "bi_tcxo_ao" },
+};
+
+static struct pll_vco lucid_vco[] = {
+ { 249600000, 2000000000, 0 },
+};
+
+static const struct alpha_pll_config video_pll0_config = {
+ .l = 0x25,
+ .alpha = 0x8000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002261,
+ .config_ctl_hi1_val = 0x329A699C,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll video_pll0 = {
+ .offset = 0x42c,
+ .vco_table = lucid_vco,
+ .num_vco = ARRAY_SIZE(lucid_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "video_pll0",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_ops,
+ },
+ },
+};
+
+static const struct alpha_pll_config video_pll1_config = {
+ .l = 0x2B,
+ .alpha = 0xC000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002261,
+ .config_ctl_hi1_val = 0x329A699C,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll video_pll1 = {
+ .offset = 0x7d0,
+ .vco_table = lucid_vco,
+ .num_vco = ARRAY_SIZE(lucid_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "video_pll1",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_ops,
+ },
+ },
+};
+
+static const struct parent_map video_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_1[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &video_pll0.clkr.hw },
+};
+
+static const struct parent_map video_cc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_PLL1_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_2[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &video_pll1.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(720000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+ F(1014000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+ F(1098000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+ F(1332000000, P_VIDEO_PLL0_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs0_clk_src = {
+ .cmd_rcgr = 0xb94,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_1,
+ .freq_tbl = ftbl_video_cc_mvs0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs0_clk_src",
+ .parent_data = video_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs1_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(840000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+ F(1098000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+ F(1332000000, P_VIDEO_PLL1_OUT_MAIN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_mvs1_clk_src = {
+ .cmd_rcgr = 0xbb4,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_2,
+ .freq_tbl = ftbl_video_cc_mvs1_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs1_clk_src",
+ .parent_data = video_cc_parent_data_2,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_2),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs0_div_clk_src = {
+ .reg = 0xd54,
+ .shift = 0,
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "video_cc_mvs0_div_clk_src",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs0c_div2_div_clk_src = {
+ .reg = 0xc54,
+ .shift = 0,
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "video_cc_mvs0c_div2_div_clk_src",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs1_div_clk_src = {
+ .reg = 0xdd4,
+ .shift = 0,
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "video_cc_mvs1_div_clk_src",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static struct clk_regmap_div video_cc_mvs1c_div2_div_clk_src = {
+ .reg = 0xcf4,
+ .shift = 0,
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data) {
+ .name = "video_cc_mvs1c_div2_div_clk_src",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_regmap_div_ro_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_video_cc_ahb_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_ahb_clk_src = {
+ .cmd_rcgr = 0xbd4,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_0,
+ .freq_tbl = ftbl_video_cc_ahb_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "video_cc_ahb_clk_src",
+ .parent_data = video_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_rcg2 video_cc_xo_clk_src = {
+ .cmd_rcgr = 0xecc,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_0,
+ .freq_tbl = ftbl_video_cc_ahb_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "video_cc_xo_clk_src",
+ .parent_data = video_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+ .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch video_cc_ahb_clk = {
+ .halt_reg = 0xe58,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xe58,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_ahb_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0_clk = {
+ .halt_reg = 0xd34,
+ .halt_check = BRANCH_HALT_SKIP, /* TODO: hw gated ? */
+ .clkr = {
+ .enable_reg = 0xd34,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs0_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs0_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0c_clk = {
+ .halt_reg = 0xc34,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xc34,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs0c_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs0c_div2_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_clk = {
+ .halt_reg = 0xdb4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xdb4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs1_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs1_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_div2_clk = {
+ .halt_reg = 0xdf4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xdf4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs1_div2_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1c_clk = {
+ .halt_reg = 0xcd4,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0xcd4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs1c_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_xo_clk = {
+ .halt_reg = 0xeec,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xeec,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_xo_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc mvs0c_gdsc = {
+ .gdscr = 0xbf8,
+ .pd = {
+ .name = "mvs0c_gdsc",
+ },
+ .flags = 0,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs1c_gdsc = {
+ .gdscr = 0xc98,
+ .pd = {
+ .name = "mvs1c_gdsc",
+ },
+ .flags = 0,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs0_gdsc = {
+ .gdscr = 0xd18,
+ .pd = {
+ .name = "mvs0_gdsc",
+ },
+ .flags = HW_CTRL,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mvs1_gdsc = {
+ .gdscr = 0xd98,
+ .pd = {
+ .name = "mvs1_gdsc",
+ },
+ .flags = HW_CTRL,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct clk_regmap *video_cc_sm8250_clocks[] = {
+ [VIDEO_CC_AHB_CLK] = &video_cc_ahb_clk.clkr,
+ [VIDEO_CC_AHB_CLK_SRC] = &video_cc_ahb_clk_src.clkr,
+ [VIDEO_CC_MVS0_CLK] = &video_cc_mvs0_clk.clkr,
+ [VIDEO_CC_MVS0_CLK_SRC] = &video_cc_mvs0_clk_src.clkr,
+ [VIDEO_CC_MVS0_DIV_CLK_SRC] = &video_cc_mvs0_div_clk_src.clkr,
+ [VIDEO_CC_MVS0C_CLK] = &video_cc_mvs0c_clk.clkr,
+ [VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC] = &video_cc_mvs0c_div2_div_clk_src.clkr,
+ [VIDEO_CC_MVS1_CLK] = &video_cc_mvs1_clk.clkr,
+ [VIDEO_CC_MVS1_CLK_SRC] = &video_cc_mvs1_clk_src.clkr,
+ [VIDEO_CC_MVS1_DIV2_CLK] = &video_cc_mvs1_div2_clk.clkr,
+ [VIDEO_CC_MVS1_DIV_CLK_SRC] = &video_cc_mvs1_div_clk_src.clkr,
+ [VIDEO_CC_MVS1C_CLK] = &video_cc_mvs1c_clk.clkr,
+ [VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC] = &video_cc_mvs1c_div2_div_clk_src.clkr,
+ [VIDEO_CC_XO_CLK] = &video_cc_xo_clk.clkr,
+ [VIDEO_CC_XO_CLK_SRC] = &video_cc_xo_clk_src.clkr,
+ [VIDEO_CC_PLL0] = &video_pll0.clkr,
+ [VIDEO_CC_PLL1] = &video_pll1.clkr,
+};
+
+static const struct qcom_reset_map video_cc_sm8250_resets[] = {
+ [VIDEO_CC_CVP_INTERFACE_BCR] = { 0xe54 },
+ [VIDEO_CC_CVP_MVS0_BCR] = { 0xd14 },
+ [VIDEO_CC_MVS0C_CLK_ARES] = { 0xc34, 2 },
+ [VIDEO_CC_CVP_MVS0C_BCR] = { 0xbf4 },
+ [VIDEO_CC_CVP_MVS1_BCR] = { 0xd94 },
+ [VIDEO_CC_MVS1C_CLK_ARES] = { 0xcd4, 2 },
+ [VIDEO_CC_CVP_MVS1C_BCR] = { 0xc94 },
+};
+
+static struct gdsc *video_cc_sm8250_gdscs[] = {
+ [MVS0C_GDSC] = &mvs0c_gdsc,
+ [MVS1C_GDSC] = &mvs1c_gdsc,
+ [MVS0_GDSC] = &mvs0_gdsc,
+ [MVS1_GDSC] = &mvs1_gdsc,
+};
+
+static const struct regmap_config video_cc_sm8250_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0xf4c,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc video_cc_sm8250_desc = {
+ .config = &video_cc_sm8250_regmap_config,
+ .clks = video_cc_sm8250_clocks,
+ .num_clks = ARRAY_SIZE(video_cc_sm8250_clocks),
+ .resets = video_cc_sm8250_resets,
+ .num_resets = ARRAY_SIZE(video_cc_sm8250_resets),
+ .gdscs = video_cc_sm8250_gdscs,
+ .num_gdscs = ARRAY_SIZE(video_cc_sm8250_gdscs),
+};
+
+static const struct of_device_id video_cc_sm8250_match_table[] = {
+ { .compatible = "qcom,sm8250-videocc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sm8250_match_table);
+
+static int video_cc_sm8250_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &video_cc_sm8250_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ clk_lucid_pll_configure(&video_pll0, regmap, &video_pll0_config);
+ clk_lucid_pll_configure(&video_pll1, regmap, &video_pll1_config);
+
+ return qcom_cc_really_probe(pdev, &video_cc_sm8250_desc, regmap);
+}
+
+static struct platform_driver video_cc_sm8250_driver = {
+ .probe = video_cc_sm8250_probe,
+ .driver = {
+ .name = "sm8250-videocc",
+ .of_match_table = video_cc_sm8250_match_table,
+ },
+};
+
+static int __init video_cc_sm8250_init(void)
+{
+ return platform_driver_register(&video_cc_sm8250_driver);
+}
+subsys_initcall(video_cc_sm8250_init);
+
+static void __exit video_cc_sm8250_exit(void)
+{
+ platform_driver_unregister(&video_cc_sm8250_driver);
+}
+module_exit(video_cc_sm8250_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QTI VIDEOCC SM8250 Driver");
--
2.26.1
Add device tree bindings for video clock controller for SM8250 SoCs.
Signed-off-by: Jonathan Marek <[email protected]>
---
.../bindings/clock/qcom,videocc.yaml | 8 +++-
.../dt-bindings/clock/qcom,videocc-sm8250.h | 42 +++++++++++++++++++
2 files changed, 49 insertions(+), 1 deletion(-)
create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8250.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index d04f5bd28dde..66a6066ae353 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -11,12 +11,13 @@ maintainers:
description: |
Qualcomm video clock control module which supports the clocks, resets and
- power domains on SDM845/SC7180/SM8150.
+ power domains on SDM845/SC7180/SM8150/SM8250.
See also:
dt-bindings/clock/qcom,videocc-sdm845.h
dt-bindings/clock/qcom,videocc-sc7180.h
dt-bindings/clock/qcom,videocc-sm8150.h
+ dt-bindings/clock/qcom,videocc-sm8250.h
properties:
compatible:
@@ -24,14 +25,19 @@ properties:
- qcom,sdm845-videocc
- qcom,sc7180-videocc
- qcom,sm8150-videocc
+ - qcom,sm8250-videocc
clocks:
+ minItems: 1
items:
- description: Board XO source
+ - description: Board XO source, always-on (required by sm8250 only)
clock-names:
+ minItems: 1
items:
- const: bi_tcxo
+ - const: bi_tcxo_ao
'#clock-cells':
const: 1
diff --git a/include/dt-bindings/clock/qcom,videocc-sm8250.h b/include/dt-bindings/clock/qcom,videocc-sm8250.h
new file mode 100644
index 000000000000..d5867fe320c7
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,videocc-sm8250.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8250_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8250_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_AHB_CLK 0
+#define VIDEO_CC_AHB_CLK_SRC 1
+#define VIDEO_CC_MVS0_CLK 2
+#define VIDEO_CC_MVS0_CLK_SRC 3
+#define VIDEO_CC_MVS0_DIV_CLK_SRC 4
+#define VIDEO_CC_MVS0C_CLK 5
+#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC 6
+#define VIDEO_CC_MVS1_CLK 7
+#define VIDEO_CC_MVS1_CLK_SRC 8
+#define VIDEO_CC_MVS1_DIV2_CLK 9
+#define VIDEO_CC_MVS1_DIV_CLK_SRC 10
+#define VIDEO_CC_MVS1C_CLK 11
+#define VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC 12
+#define VIDEO_CC_XO_CLK 13
+#define VIDEO_CC_XO_CLK_SRC 14
+#define VIDEO_CC_PLL0 15
+#define VIDEO_CC_PLL1 16
+
+/* VIDEO_CC resets */
+#define VIDEO_CC_CVP_INTERFACE_BCR 0
+#define VIDEO_CC_CVP_MVS0_BCR 1
+#define VIDEO_CC_MVS0C_CLK_ARES 2
+#define VIDEO_CC_CVP_MVS0C_BCR 3
+#define VIDEO_CC_CVP_MVS1_BCR 4
+#define VIDEO_CC_MVS1C_CLK_ARES 5
+#define VIDEO_CC_CVP_MVS1C_BCR 6
+
+#define MVS0C_GDSC 0
+#define MVS1C_GDSC 1
+#define MVS0_GDSC 2
+#define MVS1_GDSC 3
+
+#endif
--
2.26.1
Add support for the video clock controller found on SM8150 based devices.
Derived from the downstream driver.
Signed-off-by: Jonathan Marek <[email protected]>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/videocc-sm8150.c | 276 ++++++++++++++++++++++++++++++
3 files changed, 286 insertions(+)
create mode 100644 drivers/clk/qcom/videocc-sm8150.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 058327310c25..40d7ee9886c9 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -444,6 +444,15 @@ config SM_GPUCC_8250
Say Y if you want to support graphics controller devices and
functionality such as 3D graphics.
+config SM_VIDEOCC_8150
+ tristate "SM8150 Video Clock Controller"
+ select SDM_GCC_8150
+ select QCOM_GDSC
+ help
+ Support for the video clock controller on SM8150 devices.
+ Say Y if you want to support video devices and functionality such as
+ video encode and decode.
+
config SPMI_PMIC_CLKDIV
tristate "SPMI PMIC clkdiv Support"
depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 9677e769e7e9..6f4c580d2728 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o
obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
+obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/videocc-sm8150.c b/drivers/clk/qcom/videocc-sm8150.c
new file mode 100644
index 000000000000..3087e2ec8fd4
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sm8150.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
+
+#include "common.h"
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "reset.h"
+#include "gdsc.h"
+
+enum {
+ P_BI_TCXO,
+ P_CHIP_SLEEP_CLK,
+ P_CORE_BI_PLL_TEST_SE,
+ P_VIDEO_PLL0_OUT_EVEN,
+ P_VIDEO_PLL0_OUT_MAIN,
+ P_VIDEO_PLL0_OUT_ODD,
+};
+
+static struct pll_vco trion_vco[] = {
+ { 249600000, 2000000000, 0 },
+};
+
+static struct alpha_pll_config video_pll0_config = {
+ .l = 0x14,
+ .alpha = 0xD555,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002267,
+ .config_ctl_hi1_val = 0x00000024,
+ .user_ctl_val = 0x00000000,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x000000D0,
+};
+
+static struct clk_alpha_pll video_pll0 = {
+ .offset = 0x42c,
+ .vco_table = trion_vco,
+ .num_vco = ARRAY_SIZE(trion_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "video_pll0",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_trion_ops,
+ },
+ },
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_VIDEO_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &video_pll0.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_iris_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(200000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+ F(240000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+ F(338000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+ F(365000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+ F(444000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+ F(533000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 video_cc_iris_clk_src = {
+ .cmd_rcgr = 0x7f0,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = video_cc_parent_map_0,
+ .freq_tbl = ftbl_video_cc_iris_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "video_cc_iris_clk_src",
+ .parent_data = video_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static struct clk_branch video_cc_iris_ahb_clk = {
+ .halt_reg = 0x8f4,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x8f4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_iris_ahb_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_iris_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs0_core_clk = {
+ .halt_reg = 0x890,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x890,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs0_core_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_iris_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvs1_core_clk = {
+ .halt_reg = 0x8d0,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x8d0,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvs1_core_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_iris_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch video_cc_mvsc_core_clk = {
+ .halt_reg = 0x850,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x850,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "video_cc_mvsc_core_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &video_cc_iris_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc venus_gdsc = {
+ .gdscr = 0x814,
+ .pd = {
+ .name = "venus_gdsc",
+ },
+ .flags = 0,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vcodec0_gdsc = {
+ .gdscr = 0x874,
+ .pd = {
+ .name = "vcodec0_gdsc",
+ },
+ .flags = HW_CTRL,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vcodec1_gdsc = {
+ .gdscr = 0x8b4,
+ .pd = {
+ .name = "vcodec1_gdsc",
+ },
+ .flags = HW_CTRL,
+ .pwrsts = PWRSTS_OFF_ON,
+};
+static struct clk_regmap *video_cc_sm8150_clocks[] = {
+ [VIDEO_CC_IRIS_AHB_CLK] = &video_cc_iris_ahb_clk.clkr,
+ [VIDEO_CC_IRIS_CLK_SRC] = &video_cc_iris_clk_src.clkr,
+ [VIDEO_CC_MVS0_CORE_CLK] = &video_cc_mvs0_core_clk.clkr,
+ [VIDEO_CC_MVS1_CORE_CLK] = &video_cc_mvs1_core_clk.clkr,
+ [VIDEO_CC_MVSC_CORE_CLK] = &video_cc_mvsc_core_clk.clkr,
+ [VIDEO_CC_PLL0] = &video_pll0.clkr,
+};
+
+static struct gdsc *video_cc_sm8150_gdscs[] = {
+ [VENUS_GDSC] = &venus_gdsc,
+ [VCODEC0_GDSC] = &vcodec0_gdsc,
+ [VCODEC1_GDSC] = &vcodec1_gdsc,
+};
+
+static const struct regmap_config video_cc_sm8150_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0xb94,
+ .fast_io = true,
+};
+
+static const struct qcom_reset_map video_cc_sm8150_resets[] = {
+ [VIDEO_CC_MVSC_CORE_CLK_BCR] = { 0x850, 2 },
+};
+
+static const struct qcom_cc_desc video_cc_sm8150_desc = {
+ .config = &video_cc_sm8150_regmap_config,
+ .clks = video_cc_sm8150_clocks,
+ .num_clks = ARRAY_SIZE(video_cc_sm8150_clocks),
+ .resets = video_cc_sm8150_resets,
+ .num_resets = ARRAY_SIZE(video_cc_sm8150_resets),
+ .gdscs = video_cc_sm8150_gdscs,
+ .num_gdscs = ARRAY_SIZE(video_cc_sm8150_gdscs),
+};
+
+static const struct of_device_id video_cc_sm8150_match_table[] = {
+ { .compatible = "qcom,sm8150-videocc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sm8150_match_table);
+
+static int video_cc_sm8150_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &video_cc_sm8150_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ clk_trion_pll_configure(&video_pll0, regmap, &video_pll0_config);
+
+ /* Keep VIDEO_CC_XO_CLK ALWAYS-ON */
+ regmap_update_bits(regmap, 0x984, 0x1, 0x1);
+
+ return qcom_cc_really_probe(pdev, &video_cc_sm8150_desc, regmap);
+}
+
+static struct platform_driver video_cc_sm8150_driver = {
+ .probe = video_cc_sm8150_probe,
+ .driver = {
+ .name = "video_cc-sm8150",
+ .of_match_table = video_cc_sm8150_match_table,
+ },
+};
+
+static int __init video_cc_sm8150_init(void)
+{
+ return platform_driver_register(&video_cc_sm8150_driver);
+}
+subsys_initcall(video_cc_sm8150_init);
+
+static void __exit video_cc_sm8150_exit(void)
+{
+ platform_driver_unregister(&video_cc_sm8150_driver);
+}
+module_exit(video_cc_sm8150_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QTI VIDEOCC SM8150 Driver");
--
2.26.1
Add device tree bindings for video clock controller for SM8150 SoCs.
Signed-off-by: Jonathan Marek <[email protected]>
---
.../bindings/clock/qcom,videocc.yaml | 4 ++-
.../dt-bindings/clock/qcom,videocc-sm8150.h | 25 +++++++++++++++++++
2 files changed, 28 insertions(+), 1 deletion(-)
create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8150.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index 17666425476f..d04f5bd28dde 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -11,17 +11,19 @@ maintainers:
description: |
Qualcomm video clock control module which supports the clocks, resets and
- power domains on SDM845/SC7180.
+ power domains on SDM845/SC7180/SM8150.
See also:
dt-bindings/clock/qcom,videocc-sdm845.h
dt-bindings/clock/qcom,videocc-sc7180.h
+ dt-bindings/clock/qcom,videocc-sm8150.h
properties:
compatible:
enum:
- qcom,sdm845-videocc
- qcom,sc7180-videocc
+ - qcom,sm8150-videocc
clocks:
items:
diff --git a/include/dt-bindings/clock/qcom,videocc-sm8150.h b/include/dt-bindings/clock/qcom,videocc-sm8150.h
new file mode 100644
index 000000000000..e24ee840cfdb
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,videocc-sm8150.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8150_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8150_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_IRIS_AHB_CLK 0
+#define VIDEO_CC_IRIS_CLK_SRC 1
+#define VIDEO_CC_MVS0_CORE_CLK 2
+#define VIDEO_CC_MVS1_CORE_CLK 3
+#define VIDEO_CC_MVSC_CORE_CLK 4
+#define VIDEO_CC_PLL0 5
+
+/* VIDEO_CC Resets */
+#define VIDEO_CC_MVSC_CORE_CLK_BCR 0
+
+/* VIDEO_CC GDSCRs */
+#define VENUS_GDSC 0
+#define VCODEC0_GDSC 1
+#define VCODEC1_GDSC 2
+
+#endif
--
2.26.1
On Thu, 03 Sep 2020 23:09:50 -0400, Jonathan Marek wrote:
> These two bindings are almost identical, so combine them into one. This
> will make it easier to add the sm8150 and sm8250 videocc bindings.
>
> Signed-off-by: Jonathan Marek <[email protected]>
> ---
> .../bindings/clock/qcom,sc7180-videocc.yaml | 65 -------------------
> ...,sdm845-videocc.yaml => qcom,videocc.yaml} | 14 ++--
> 2 files changed, 9 insertions(+), 70 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> rename Documentation/devicetree/bindings/clock/{qcom,sdm845-videocc.yaml => qcom,videocc.yaml} (76%)
>
Reviewed-by: Rob Herring <[email protected]>
On Thu, 03 Sep 2020 23:09:51 -0400, Jonathan Marek wrote:
> Add device tree bindings for video clock controller for SM8150 SoCs.
>
> Signed-off-by: Jonathan Marek <[email protected]>
> ---
> .../bindings/clock/qcom,videocc.yaml | 4 ++-
> .../dt-bindings/clock/qcom,videocc-sm8150.h | 25 +++++++++++++++++++
> 2 files changed, 28 insertions(+), 1 deletion(-)
> create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8150.h
>
Reviewed-by: Rob Herring <[email protected]>
On Thu, 03 Sep 2020 23:09:52 -0400, Jonathan Marek wrote:
> Add device tree bindings for video clock controller for SM8250 SoCs.
>
> Signed-off-by: Jonathan Marek <[email protected]>
> ---
> .../bindings/clock/qcom,videocc.yaml | 8 +++-
> .../dt-bindings/clock/qcom,videocc-sm8250.h | 42 +++++++++++++++++++
> 2 files changed, 49 insertions(+), 1 deletion(-)
> create mode 100644 include/dt-bindings/clock/qcom,videocc-sm8250.h
>
Reviewed-by: Rob Herring <[email protected]>
Quoting Jonathan Marek (2020-09-03 20:09:54)
> Add support for the video clock controller found on SM8250 based devices.
>
> Derived from the downstream driver.
>
> Signed-off-by: Jonathan Marek <[email protected]>
> ---
> drivers/clk/qcom/Kconfig | 9 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/videocc-sm8250.c | 518 ++++++++++++++++++++++++++++++
> 3 files changed, 528 insertions(+)
> create mode 100644 drivers/clk/qcom/videocc-sm8250.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 40d7ee9886c9..95efa38211d5 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -453,6 +453,15 @@ config SM_VIDEOCC_8150
> Say Y if you want to support video devices and functionality such as
> video encode and decode.
>
> +config SM_VIDEOCC_8250
> + tristate "SM8250 Video Clock Controller"
> + select SDM_GCC_8250
> + select QCOM_GDSC
> + help
> + Support for the video clock controller on SM8250 devices.
> + Say Y if you want to support video devices and functionality such as
> + video encode and decode.
> +
> config SPMI_PMIC_CLKDIV
> tristate "SPMI PMIC clkdiv Support"
> depends on SPMI || COMPILE_TEST
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 6f4c580d2728..55fb20800b66 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -69,6 +69,7 @@ obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
> obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
> obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
> obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
> +obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
> obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
> obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
> obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
> diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
> new file mode 100644
> index 000000000000..a814d10945c4
> --- /dev/null
> +++ b/drivers/clk/qcom/videocc-sm8250.c
> @@ -0,0 +1,518 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,videocc-sm8250.h>
> +
[...]
> +static struct clk_rcg2 video_cc_ahb_clk_src = {
> + .cmd_rcgr = 0xbd4,
> + .mnd_width = 0,
> + .hid_width = 5,
> + .parent_map = video_cc_parent_map_0,
> + .freq_tbl = ftbl_video_cc_ahb_clk_src,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "video_cc_ahb_clk_src",
> + .parent_data = video_cc_parent_data_0,
> + .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_rcg2_shared_ops,
> + },
> +};
> +
> +static struct clk_rcg2 video_cc_xo_clk_src = {
> + .cmd_rcgr = 0xecc,
> + .mnd_width = 0,
> + .hid_width = 5,
> + .parent_map = video_cc_parent_map_0,
> + .freq_tbl = ftbl_video_cc_ahb_clk_src,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "video_cc_xo_clk_src",
> + .parent_data = video_cc_parent_data_0,
> + .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
> + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
Similar critical clk comment, see below.
> + .ops = &clk_rcg2_ops,
> + },
> +};
> +
> +static struct clk_branch video_cc_ahb_clk = {
> + .halt_reg = 0xe58,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0xe58,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "video_cc_ahb_clk",
> + .parent_data = &(const struct clk_parent_data){
> + .hw = &video_cc_ahb_clk_src.clkr.hw,
> + },
> + .num_parents = 1,
> + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
Similar critical clk comment, see below.
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch video_cc_mvs0_clk = {
> + .halt_reg = 0xd34,
> + .halt_check = BRANCH_HALT_SKIP, /* TODO: hw gated ? */
Is this resolved?
> + .clkr = {
> + .enable_reg = 0xd34,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "video_cc_mvs0_clk",
> + .parent_data = &(const struct clk_parent_data){
> + .hw = &video_cc_mvs0_div_clk_src.clkr.hw,
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
[...]
> +
> +static struct clk_branch video_cc_xo_clk = {
> + .halt_reg = 0xeec,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0xeec,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "video_cc_xo_clk",
> + .parent_data = &(const struct clk_parent_data){
> + .hw = &video_cc_xo_clk_src.clkr.hw,
> + },
> + .num_parents = 1,
> + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
Please add a coment why it's critical. If no consumer of this clk exists
it's preferred to move the enabling to probe and not waste memory
modeling it in software.
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
Quoting Jonathan Marek (2020-09-03 20:09:52)
> diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
> index d04f5bd28dde..66a6066ae353 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
> @@ -24,14 +25,19 @@ properties:
> - qcom,sdm845-videocc
> - qcom,sc7180-videocc
> - qcom,sm8150-videocc
> + - qcom,sm8250-videocc
>
> clocks:
> + minItems: 1
> items:
> - description: Board XO source
> + - description: Board XO source, always-on (required by sm8250 only)
I'd expect every SoC to need it. Can you leave it out for now and we can
add it when it becomes required?
Quoting Jonathan Marek (2020-09-03 20:09:50)
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
> similarity index 76%
> rename from Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> rename to Documentation/devicetree/bindings/clock/qcom,videocc.yaml
> index f7a0cf53d5f0..17666425476f 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
> @@ -1,23 +1,27 @@
> # SPDX-License-Identifier: GPL-2.0-only
> %YAML 1.2
> ---
> -$id: http://devicetree.org/schemas/clock/qcom,sdm845-videocc.yaml#
> +$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: Qualcomm Video Clock & Reset Controller Binding for SDM845
> +title: Qualcomm Video Clock & Reset Controller Binding
>
> maintainers:
> - Taniya Das <[email protected]>
>
> description: |
> Qualcomm video clock control module which supports the clocks, resets and
> - power domains on SDM845.
> + power domains on SDM845/SC7180.
>
> - See also dt-bindings/clock/qcom,videocc-sdm845.h.
> + See also:
> + dt-bindings/clock/qcom,videocc-sdm845.h
> + dt-bindings/clock/qcom,videocc-sc7180.h
Sort this alphabetically please.
>
> properties:
> compatible:
> - const: qcom,sdm845-videocc
> + enum:
> + - qcom,sdm845-videocc
> + - qcom,sc7180-videocc
Sort this alphabetically please.
>
> clocks:
> items:
> --
> 2.26.1
>
Quoting Jonathan Marek (2020-09-03 20:09:51)
> Add device tree bindings for video clock controller for SM8150 SoCs.
>
> Signed-off-by: Jonathan Marek <[email protected]>
> ---
This one should be fine after sorting the lists in the first patch.
On 9/22/20 2:46 PM, Stephen Boyd wrote:
> Quoting Jonathan Marek (2020-09-03 20:09:54)
>> Add support for the video clock controller found on SM8250 based devices.
>>
>> Derived from the downstream driver.
>>
>> Signed-off-by: Jonathan Marek <[email protected]>
>> ---
>> drivers/clk/qcom/Kconfig | 9 +
>> drivers/clk/qcom/Makefile | 1 +
>> drivers/clk/qcom/videocc-sm8250.c | 518 ++++++++++++++++++++++++++++++
>> 3 files changed, 528 insertions(+)
>> create mode 100644 drivers/clk/qcom/videocc-sm8250.c
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index 40d7ee9886c9..95efa38211d5 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -453,6 +453,15 @@ config SM_VIDEOCC_8150
>> Say Y if you want to support video devices and functionality such as
>> video encode and decode.
>>
>> +config SM_VIDEOCC_8250
>> + tristate "SM8250 Video Clock Controller"
>> + select SDM_GCC_8250
>> + select QCOM_GDSC
>> + help
>> + Support for the video clock controller on SM8250 devices.
>> + Say Y if you want to support video devices and functionality such as
>> + video encode and decode.
>> +
>> config SPMI_PMIC_CLKDIV
>> tristate "SPMI PMIC clkdiv Support"
>> depends on SPMI || COMPILE_TEST
>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
>> index 6f4c580d2728..55fb20800b66 100644
>> --- a/drivers/clk/qcom/Makefile
>> +++ b/drivers/clk/qcom/Makefile
>> @@ -69,6 +69,7 @@ obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
>> obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
>> obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
>> obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
>> +obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
>> obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
>> obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
>> obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
>> diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
>> new file mode 100644
>> index 000000000000..a814d10945c4
>> --- /dev/null
>> +++ b/drivers/clk/qcom/videocc-sm8250.c
>> @@ -0,0 +1,518 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <dt-bindings/clock/qcom,videocc-sm8250.h>
>> +
> [...]
>> +static struct clk_rcg2 video_cc_ahb_clk_src = {
>> + .cmd_rcgr = 0xbd4,
>> + .mnd_width = 0,
>> + .hid_width = 5,
>> + .parent_map = video_cc_parent_map_0,
>> + .freq_tbl = ftbl_video_cc_ahb_clk_src,
>> + .clkr.hw.init = &(struct clk_init_data){
>> + .name = "video_cc_ahb_clk_src",
>> + .parent_data = video_cc_parent_data_0,
>> + .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_rcg2_shared_ops,
>> + },
>> +};
>> +
>> +static struct clk_rcg2 video_cc_xo_clk_src = {
>> + .cmd_rcgr = 0xecc,
>> + .mnd_width = 0,
>> + .hid_width = 5,
>> + .parent_map = video_cc_parent_map_0,
>> + .freq_tbl = ftbl_video_cc_ahb_clk_src,
>> + .clkr.hw.init = &(struct clk_init_data){
>> + .name = "video_cc_xo_clk_src",
>> + .parent_data = video_cc_parent_data_0,
>> + .num_parents = ARRAY_SIZE(video_cc_parent_data_0),
>> + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
>
> Similar critical clk comment, see below.
>
>> + .ops = &clk_rcg2_ops,
>> + },
>> +};
>> +
>> +static struct clk_branch video_cc_ahb_clk = {
>> + .halt_reg = 0xe58,
>> + .halt_check = BRANCH_HALT,
>> + .clkr = {
>> + .enable_reg = 0xe58,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(struct clk_init_data){
>> + .name = "video_cc_ahb_clk",
>> + .parent_data = &(const struct clk_parent_data){
>> + .hw = &video_cc_ahb_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
>
> Similar critical clk comment, see below.
>
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
>> +static struct clk_branch video_cc_mvs0_clk = {
>> + .halt_reg = 0xd34,
>> + .halt_check = BRANCH_HALT_SKIP, /* TODO: hw gated ? */
>
> Is this resolved?
>
Downstream has this clock as BRANCH_HALT_VOTED, but with the upstream
venus driver (with patches to enable sm8250), that results in a
"video_cc_mvs0_clk status stuck at 'off" error. AFAIK venus
enables/disables this clock on its own (venus still works without
touching this clock), but I didn't want to remove this in case it might
be needed. I removed these clocks in the v3 I just sent.
>> + .clkr = {
>> + .enable_reg = 0xd34,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(struct clk_init_data){
>> + .name = "video_cc_mvs0_clk",
>> + .parent_data = &(const struct clk_parent_data){
>> + .hw = &video_cc_mvs0_div_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
> [...]
>> +
>> +static struct clk_branch video_cc_xo_clk = {
>> + .halt_reg = 0xeec,
>> + .halt_check = BRANCH_HALT,
>> + .clkr = {
>> + .enable_reg = 0xeec,
>> + .enable_mask = BIT(0),
>> + .hw.init = &(struct clk_init_data){
>> + .name = "video_cc_xo_clk",
>> + .parent_data = &(const struct clk_parent_data){
>> + .hw = &video_cc_xo_clk_src.clkr.hw,
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
>
> Please add a coment why it's critical. If no consumer of this clk exists
> it's preferred to move the enabling to probe and not waste memory
> modeling it in software.
>
>> + .ops = &clk_branch2_ops,
>> + },
>> + },
>> +};
>> +
Quoting Jonathan Marek (2020-09-23 09:07:16)
> On 9/22/20 2:46 PM, Stephen Boyd wrote:
> > Quoting Jonathan Marek (2020-09-03 20:09:54)
> >
> >> + .ops = &clk_branch2_ops,
> >> + },
> >> + },
> >> +};
> >> +
> >> +static struct clk_branch video_cc_mvs0_clk = {
> >> + .halt_reg = 0xd34,
> >> + .halt_check = BRANCH_HALT_SKIP, /* TODO: hw gated ? */
> >
> > Is this resolved?
> >
>
> Downstream has this clock as BRANCH_HALT_VOTED, but with the upstream
> venus driver (with patches to enable sm8250), that results in a
> "video_cc_mvs0_clk status stuck at 'off" error. AFAIK venus
> enables/disables this clock on its own (venus still works without
> touching this clock), but I didn't want to remove this in case it might
> be needed. I removed these clocks in the v3 I just sent.
>
Hmm. Does downstream use these clks? There have been some clk stuck
problems with venus recently that were attributed to improperly enabling
clks before enabling interconnects and power domains. Maybe it's the
same problem.
On 9/23/20 7:30 PM, Stephen Boyd wrote:
> Quoting Jonathan Marek (2020-09-23 09:07:16)
>> On 9/22/20 2:46 PM, Stephen Boyd wrote:
>>> Quoting Jonathan Marek (2020-09-03 20:09:54)
>>>
>>>> + .ops = &clk_branch2_ops,
>>>> + },
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_branch video_cc_mvs0_clk = {
>>>> + .halt_reg = 0xd34,
>>>> + .halt_check = BRANCH_HALT_SKIP, /* TODO: hw gated ? */
>>>
>>> Is this resolved?
>>>
>>
>> Downstream has this clock as BRANCH_HALT_VOTED, but with the upstream
>> venus driver (with patches to enable sm8250), that results in a
>> "video_cc_mvs0_clk status stuck at 'off" error. AFAIK venus
>> enables/disables this clock on its own (venus still works without
>> touching this clock), but I didn't want to remove this in case it might
>> be needed. I removed these clocks in the v3 I just sent.
>>
>
> Hmm. Does downstream use these clks? There have been some clk stuck
> problems with venus recently that were attributed to improperly enabling
> clks before enabling interconnects and power domains. Maybe it's the
> same problem.
>
Yes, downstream uses these clks.
The "stuck" problem still happens if GSDCS/interconnects are always on,
and like I mentioned, venus works even with these clocks completely
removed.
I think venus controls these clocks (and downstream just happens to try
enabling it at a point where venus has already enabled it?). I'm not too
sure about this, it might have something to do with the GDSC having the
HW_CTRL flag too..
Quoting Jonathan Marek (2020-09-23 17:54:59)
> On 9/23/20 7:30 PM, Stephen Boyd wrote:
> > Quoting Jonathan Marek (2020-09-23 09:07:16)
> >> On 9/22/20 2:46 PM, Stephen Boyd wrote:
> >>> Quoting Jonathan Marek (2020-09-03 20:09:54)
> >>>
> >>>> + .ops = &clk_branch2_ops,
> >>>> + },
> >>>> + },
> >>>> +};
> >>>> +
> >>>> +static struct clk_branch video_cc_mvs0_clk = {
> >>>> + .halt_reg = 0xd34,
> >>>> + .halt_check = BRANCH_HALT_SKIP, /* TODO: hw gated ? */
> >>>
> >>> Is this resolved?
> >>>
> >>
> >> Downstream has this clock as BRANCH_HALT_VOTED, but with the upstream
> >> venus driver (with patches to enable sm8250), that results in a
> >> "video_cc_mvs0_clk status stuck at 'off" error. AFAIK venus
> >> enables/disables this clock on its own (venus still works without
> >> touching this clock), but I didn't want to remove this in case it might
> >> be needed. I removed these clocks in the v3 I just sent.
> >>
> >
> > Hmm. Does downstream use these clks? There have been some clk stuck
> > problems with venus recently that were attributed to improperly enabling
> > clks before enabling interconnects and power domains. Maybe it's the
> > same problem.
> >
>
> Yes, downstream uses these clks.
>
> The "stuck" problem still happens if GSDCS/interconnects are always on,
> and like I mentioned, venus works even with these clocks completely
> removed.
>
> I think venus controls these clocks (and downstream just happens to try
> enabling it at a point where venus has already enabled it?). I'm not too
> sure about this, it might have something to do with the GDSC having the
> HW_CTRL flag too..
Ok. Maybe Taniya has an idea.