Add programming sequence support for managing the Agera PLLs.
Signed-off-by: Taniya Das <[email protected]>
---
drivers/clk/qcom/clk-alpha-pll.c | 62 ++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 4 +++
2 files changed, 66 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index f3b8b54..21c357c 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -116,6 +116,16 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[PLL_OFF_OPMODE] = 0x38,
[PLL_OFF_ALPHA_VAL] = 0x40,
},
+ [CLK_ALPHA_PLL_TYPE_AGERA] = {
+ [PLL_OFF_L_VAL] = 0x04,
+ [PLL_OFF_ALPHA_VAL] = 0x08,
+ [PLL_OFF_USER_CTL] = 0x0c,
+ [PLL_OFF_CONFIG_CTL] = 0x10,
+ [PLL_OFF_CONFIG_CTL_U] = 0x14,
+ [PLL_OFF_TEST_CTL] = 0x18,
+ [PLL_OFF_TEST_CTL_U] = 0x1c,
+ [PLL_OFF_STATUS] = 0x2c,
+ },
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
@@ -1538,3 +1548,55 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
+
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config)
+{
+ clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
+ clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll),
+ config->user_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll),
+ config->config_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll),
+ config->config_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll),
+ config->test_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll),
+ config->test_ctl_hi_val);
+}
+EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
+
+static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long prate)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ u32 l, alpha_width = pll_alpha_width(pll);
+ int ret;
+ unsigned long rrate;
+ u64 a;
+
+ rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+ ret = alpha_pll_check_rate_margin(hw, rrate, rate);
+ if (ret < 0)
+ return ret;
+
+ /* change L_VAL without having to go through the power on sequence */
+ regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+ if (clk_hw_is_enabled(hw))
+ return wait_for_pll_enable_lock(pll);
+
+ return 0;
+}
+
+const struct clk_ops clk_alpha_pll_agera_ops = {
+ .enable = clk_alpha_pll_enable,
+ .disable = clk_alpha_pll_disable,
+ .is_enabled = clk_alpha_pll_is_enabled,
+ .recalc_rate = alpha_pll_fabia_recalc_rate,
+ .round_rate = clk_alpha_pll_round_rate,
+ .set_rate = clk_alpha_pll_agera_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index d3201b8..0ea30d2 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -15,6 +15,7 @@ enum {
CLK_ALPHA_PLL_TYPE_FABIA,
CLK_ALPHA_PLL_TYPE_TRION,
CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
+ CLK_ALPHA_PLL_TYPE_AGERA,
CLK_ALPHA_PLL_TYPE_MAX,
};
@@ -141,6 +142,7 @@ extern const struct clk_ops clk_alpha_pll_postdiv_trion_ops;
extern const struct clk_ops clk_alpha_pll_lucid_ops;
#define clk_alpha_pll_fixed_lucid_ops clk_alpha_pll_fixed_trion_ops
extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_agera_ops;
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
@@ -148,6 +150,8 @@ void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config);
#define clk_lucid_pll_configure(pll, regmap, config) \
clk_trion_pll_configure(pll, regmap, config)
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
Quoting Taniya Das (2020-10-16 11:43:33)
> Add programming sequence support for managing the Agera PLLs.
>
> Signed-off-by: Taniya Das <[email protected]>
> ---
Applied to clk-next