Add hbr3_hbr2 voltage and pre-emphasis swing table to support
HBR3 link rate
Signed-off-by: Kuogee Hsieh <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_panel.c | 4 ----
drivers/phy/qualcomm/phy-qcom-qmp.c | 24 ++++++++++++++++++++++--
2 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
index 9cc8166..63112fa 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -76,10 +76,6 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
if (link_info->num_lanes > dp_panel->max_dp_lanes)
link_info->num_lanes = dp_panel->max_dp_lanes;
- /* Limit support upto HBR2 until HBR3 support is added */
- if (link_info->rate >= (drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4)))
- link_info->rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4);
-
DRM_DEBUG_DP("version: %d.%d\n", major, minor);
DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 0939a9e..cc5ef59 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -2965,6 +2965,21 @@ static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
}
+
+static u8 const qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
+ {0x00, 0x0C, 0x15, 0x1A},
+ {0x02, 0x0E, 0x16, 0xFF},
+ {0x02, 0x11, 0xFF, 0xFF},
+ {0x04, 0xFF, 0xFF, 0xFF}
+};
+
+static u8 const qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
+ {0x02, 0x12, 0x16, 0x1A},
+ {0x09, 0x19, 0x1F, 0xFF},
+ {0x10, 0x1F, 0xFF, 0xFF},
+ {0x1F, 0xFF, 0xFF, 0xFF}
+};
+
static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
{ 0x00, 0x0c, 0x14, 0x19 },
{ 0x00, 0x0b, 0x12, 0xff },
@@ -3000,8 +3015,13 @@ static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
drvr_en = 0x10;
}
- voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
- pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+ if (dp_opts->link_rate <= 2700) {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+ } else {
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
+ }
/* TODO: Move check to config check */
if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Quoting Kuogee Hsieh (2021-02-17 08:58:42)
> Add hbr3_hbr2 voltage and pre-emphasis swing table to support
> HBR3 link rate
>
> Signed-off-by: Kuogee Hsieh <[email protected]>
> ---
> drivers/gpu/drm/msm/dp/dp_panel.c | 4 ----
> drivers/phy/qualcomm/phy-qcom-qmp.c | 24 ++++++++++++++++++++++--
This spans to subsystems so at least you should run get_maintainers and
include phy maintainers. Maybe it should be split into two patches too
so it can go via different trees.
> 2 files changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> index 9cc8166..63112fa 100644
> --- a/drivers/gpu/drm/msm/dp/dp_panel.c
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -76,10 +76,6 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
> if (link_info->num_lanes > dp_panel->max_dp_lanes)
> link_info->num_lanes = dp_panel->max_dp_lanes;
>
> - /* Limit support upto HBR2 until HBR3 support is added */
> - if (link_info->rate >= (drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4)))
> - link_info->rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4);
> -
> DRM_DEBUG_DP("version: %d.%d\n", major, minor);
> DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
> DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 0939a9e..cc5ef59 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -2965,6 +2965,21 @@ static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
> qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> }
>
> +
> +static u8 const qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
Should be static const u8 qmp_dp...
> + {0x00, 0x0C, 0x15, 0x1A},
> + {0x02, 0x0E, 0x16, 0xFF},
> + {0x02, 0x11, 0xFF, 0xFF},
> + {0x04, 0xFF, 0xFF, 0xFF}
> +};
> +
> +static u8 const qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
Same.
> + {0x02, 0x12, 0x16, 0x1A},
Please add a space after { and before } and use lowercase hex to match
the qmp_dp_v3_pre_emphasis_hbr_rbr design.
> + {0x09, 0x19, 0x1F, 0xFF},
> + {0x10, 0x1F, 0xFF, 0xFF},
> + {0x1F, 0xFF, 0xFF, 0xFF}
> +};
> +
> static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> { 0x00, 0x0c, 0x14, 0x19 },
> { 0x00, 0x0b, 0x12, 0xff },
> @@ -3000,8 +3015,13 @@ static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
> drvr_en = 0x10;
> }
>
> - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + if (dp_opts->link_rate <= 2700) {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> + } else {
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> + }
On 17-02-21, 09:36, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2021-02-17 08:58:42)
> > Add hbr3_hbr2 voltage and pre-emphasis swing table to support
> > HBR3 link rate
> >
> > Signed-off-by: Kuogee Hsieh <[email protected]>
> > ---
> > drivers/gpu/drm/msm/dp/dp_panel.c | 4 ----
> > drivers/phy/qualcomm/phy-qcom-qmp.c | 24 ++++++++++++++++++++++--
>
> This spans to subsystems so at least you should run get_maintainers and
> include phy maintainers. Maybe it should be split into two patches too
> so it can go via different trees.
different patches for different subsytem unless we risk breaking bisect
should be general approach...
>
> > 2 files changed, 22 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> > index 9cc8166..63112fa 100644
> > --- a/drivers/gpu/drm/msm/dp/dp_panel.c
> > +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> > @@ -76,10 +76,6 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
> > if (link_info->num_lanes > dp_panel->max_dp_lanes)
> > link_info->num_lanes = dp_panel->max_dp_lanes;
> >
> > - /* Limit support upto HBR2 until HBR3 support is added */
> > - if (link_info->rate >= (drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4)))
> > - link_info->rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4);
> > -
> > DRM_DEBUG_DP("version: %d.%d\n", major, minor);
> > DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
> > DRM_DEBUG_DP("lane_count=%d\n", link_info->num_lanes);
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> > index 0939a9e..cc5ef59 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> > @@ -2965,6 +2965,21 @@ static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
> > qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> > }
> >
> > +
> > +static u8 const qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
>
> Should be static const u8 qmp_dp...
>
> > + {0x00, 0x0C, 0x15, 0x1A},
> > + {0x02, 0x0E, 0x16, 0xFF},
> > + {0x02, 0x11, 0xFF, 0xFF},
> > + {0x04, 0xFF, 0xFF, 0xFF}
> > +};
> > +
> > +static u8 const qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
>
> Same.
>
> > + {0x02, 0x12, 0x16, 0x1A},
>
> Please add a space after { and before } and use lowercase hex to match
> the qmp_dp_v3_pre_emphasis_hbr_rbr design.
>
> > + {0x09, 0x19, 0x1F, 0xFF},
> > + {0x10, 0x1F, 0xFF, 0xFF},
> > + {0x1F, 0xFF, 0xFF, 0xFF}
> > +};
> > +
> > static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> > { 0x00, 0x0c, 0x14, 0x19 },
> > { 0x00, 0x0b, 0x12, 0xff },
> > @@ -3000,8 +3015,13 @@ static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
> > drvr_en = 0x10;
> > }
> >
> > - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> > - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> > + if (dp_opts->link_rate <= 2700) {
> > + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> > + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> > + } else {
> > + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> > + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> > + }
--
~Vinod