From: Johannes Hahn <[email protected]>
This allows the RX6110 driver to be automatically assigned to the right
device on the I2C bus.
Signed-off-by: Johannes Hahn <[email protected]>
Co-developed-by: Claudius Heine <[email protected]>
Signed-off-by: Claudius Heine <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reported-by: kernel test robot <[email protected]>
---
drivers/rtc/rtc-rx6110.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
index 79161d4c6ce4..f4d425002f7f 100644
--- a/drivers/rtc/rtc-rx6110.c
+++ b/drivers/rtc/rtc-rx6110.c
@@ -447,6 +447,12 @@ static int rx6110_i2c_probe(struct i2c_client *client,
return rx6110_probe(rx6110, &client->dev);
}
+static const struct acpi_device_id rx6110_i2c_acpi_match[] = {
+ { "SECC6110" },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, rx6110_i2c_acpi_match);
+
static const struct i2c_device_id rx6110_i2c_id[] = {
{ "rx6110", 0 },
{ }
@@ -456,6 +462,7 @@ MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);
static struct i2c_driver rx6110_i2c_driver = {
.driver = {
.name = RX6110_DRIVER_NAME,
+ .acpi_match_table = rx6110_i2c_acpi_match,
},
.probe = rx6110_i2c_probe,
.id_table = rx6110_i2c_id,
base-commit: 1df27313f50a57497c1faeb6a6ae4ca939c85a7d
--
2.30.1
On Wed, Mar 17, 2021 at 9:56 AM Claudius Heine <[email protected]> wrote:
>
> From: Johannes Hahn <[email protected]>
>
> This allows the RX6110 driver to be automatically assigned to the right
> device on the I2C bus.
Thanks for an update!
> Signed-off-by: Johannes Hahn <[email protected]>
> Co-developed-by: Claudius Heine <[email protected]>
> Signed-off-by: Claudius Heine <[email protected]>
> Reviewed-by: Andy Shevchenko <[email protected]>
> Reported-by: kernel test robot <[email protected]>
This is usually for patches that do fix found problems, here it's a
completely new item and the report was done in the middle of the
development. That said, you may give credit to LKP by just mentioning
it in the comments section (after the cutter '---' line). I'll leave
this to Alexandre and Alessandro to decide if you need a resend or
they may remove it when applying. (In my opinion resend is not needed
right now)
> ---
> drivers/rtc/rtc-rx6110.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
> index 79161d4c6ce4..f4d425002f7f 100644
> --- a/drivers/rtc/rtc-rx6110.c
> +++ b/drivers/rtc/rtc-rx6110.c
> @@ -447,6 +447,12 @@ static int rx6110_i2c_probe(struct i2c_client *client,
> return rx6110_probe(rx6110, &client->dev);
> }
>
> +static const struct acpi_device_id rx6110_i2c_acpi_match[] = {
> + { "SECC6110" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, rx6110_i2c_acpi_match);
> +
> static const struct i2c_device_id rx6110_i2c_id[] = {
> { "rx6110", 0 },
> { }
> @@ -456,6 +462,7 @@ MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);
> static struct i2c_driver rx6110_i2c_driver = {
> .driver = {
> .name = RX6110_DRIVER_NAME,
> + .acpi_match_table = rx6110_i2c_acpi_match,
> },
> .probe = rx6110_i2c_probe,
> .id_table = rx6110_i2c_id,
>
> base-commit: 1df27313f50a57497c1faeb6a6ae4ca939c85a7d
> --
> 2.30.1
>
--
With Best Regards,
Andy Shevchenko
Hi Andy,
On 2021-03-17 10:28, Andy Shevchenko wrote:
> On Wed, Mar 17, 2021 at 9:56 AM Claudius Heine <[email protected]> wrote:
>>
>> From: Johannes Hahn <[email protected]>
>>
>> This allows the RX6110 driver to be automatically assigned to the right
>> device on the I2C bus.
>
> Thanks for an update!
>
>> Signed-off-by: Johannes Hahn <[email protected]>
>> Co-developed-by: Claudius Heine <[email protected]>
>> Signed-off-by: Claudius Heine <[email protected]>
>> Reviewed-by: Andy Shevchenko <[email protected]>
>
>> Reported-by: kernel test robot <[email protected]>
>
> This is usually for patches that do fix found problems, here it's a
> completely new item and the report was done in the middle of the
> development. That said, you may give credit to LKP by just mentioning
> it in the comments section (after the cutter '---' line). I'll leave
> this to Alexandre and Alessandro to decide if you need a resend or
> they may remove it when applying. (In my opinion resend is not needed
> right now)
Ok. Thanks a lot for your reviews and patience!
regards,
Claudius
On Wed, 17 Mar 2021 08:52:27 +0100, Claudius Heine wrote:
> This allows the RX6110 driver to be automatically assigned to the right
> device on the I2C bus.
Applied, thanks!
[1/1] rtc: rx6110: add ACPI bindings to I2C
commit: 8d69f62fddf6c1a8c7745120c4d6aab9322b001a
Best regards,
--
Alexandre Belloni <[email protected]>
On 17/03/2021 10:32:39+0100, Claudius Heine wrote:
> Hi Andy,
>
> On 2021-03-17 10:28, Andy Shevchenko wrote:
> > On Wed, Mar 17, 2021 at 9:56 AM Claudius Heine <[email protected]> wrote:
> > >
> > > From: Johannes Hahn <[email protected]>
> > >
> > > This allows the RX6110 driver to be automatically assigned to the right
> > > device on the I2C bus.
> >
> > Thanks for an update!
> >
> > > Signed-off-by: Johannes Hahn <[email protected]>
> > > Co-developed-by: Claudius Heine <[email protected]>
> > > Signed-off-by: Claudius Heine <[email protected]>
> > > Reviewed-by: Andy Shevchenko <[email protected]>
> >
> > > Reported-by: kernel test robot <[email protected]>
> >
> > This is usually for patches that do fix found problems, here it's a
> > completely new item and the report was done in the middle of the
> > development. That said, you may give credit to LKP by just mentioning
> > it in the comments section (after the cutter '---' line). I'll leave
> > this to Alexandre and Alessandro to decide if you need a resend or
> > they may remove it when applying. (In my opinion resend is not needed
> > right now)
> Ok. Thanks a lot for your reviews and patience!
>
I removed it when applying. Thanks for the work and the reviews!
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com