From: ChiYuan Huang <[email protected]>
Add binding document for Richtek RTQ2134 SubPMIC.
Signed-off-by: ChiYuan Huang <[email protected]>
---
.../regulator/richtek,rtq2134-regulator.yaml | 106 +++++++++++++++++++++
1 file changed, 106 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml
new file mode 100644
index 00000000..3f47e8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq2134-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ2134 SubPMIC Regulator
+
+maintainers:
+ - ChiYuan Huang <[email protected]>
+
+description: |
+ The RTQ2134 is a multi-phase, programmable power management IC that
+ integrates with four high efficient, synchronous step-down converter cores.
+
+ Datasheet is available at
+ https://www.richtek.com/assets/product_file/RTQ2134-QA/DSQ2134-QA-01.pdf
+
+properties:
+ compatible:
+ enum:
+ - richtek,rtq2134
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+
+ patternProperties:
+ "^buck[1-3]$":
+ type: object
+ $ref: regulator.yaml#
+ description: |
+ regulator description for buck[1-3].
+
+ properties:
+ richtek,use-vsel-dvs:
+ type: boolean
+ description: |
+ If specified, buck will listen to 'vsel' pin for dvs config.
+ Else, use dvs0 voltage by default.
+
+ richtek,uv-shutdown:
+ type: boolean
+ description: |
+ If specified, use shutdown as UV action. Else, hiccup by default.
+
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtq2134@18 {
+ compatible = "richtek,rtq2134";
+ reg = <0x18>;
+
+ regulators {
+ buck1 {
+ regulator-name = "rtq2134-buck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-always-on;
+ richtek,use-vsel-dvs;
+ regulator-state-mem {
+ regulator-suspend-min-microvolt = <550000>;
+ regulator-suspend-max-microvolt = <550000>;
+ };
+ };
+ buck2 {
+ regulator-name = "rtq2134-buck2";
+ regulator-min-microvolt = <1120000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-always-on;
+ richtek,use-vsel-dvs;
+ regulator-state-mem {
+ regulator-suspend-min-microvolt = <1120000>;
+ regulator-suspend-max-microvolt = <1120000>;
+ };
+ };
+ buck3 {
+ regulator-name = "rtq2134-buck3";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ regulator-always-on;
+ richtek,use-vsel-dvs;
+ regulator-state-mem {
+ regulator-suspend-min-microvolt = <600000>;
+ regulator-suspend-max-microvolt = <600000>;
+ };
+ };
+ };
+ };
+ };
--
2.7.4
From: ChiYuan Huang <[email protected]>
This adds support for Richtek RTQ2134 SubPMIC.
Signed-off-by: ChiYuan Huang <[email protected]>
---
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rtq2134-regulator.c | 373 ++++++++++++++++++++++++++++++++++
3 files changed, 385 insertions(+)
create mode 100644 drivers/regulator/rtq2134-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6562d4c..7bd99d7 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1057,6 +1057,17 @@ config REGULATOR_RT6245
It can support up to 14A output current and adjustable output voltage
from 0.4375V to 1.3875V, per step 12.5mV.
+config REGULATOR_RTQ2134
+ tristate "Richtek RTQ2134 SubPMIC Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver adds support for RTQ2134 SubPMIC regulators.
+ The RTQ2134 is a multi-phase, programmable power management IC that
+ integrate with four high efficient, synchronous step-down converter
+ cores. It features wide output voltage range and the capability to
+ configure the corresponding power stages.
+
config REGULATOR_RTMV20
tristate "Richtek RTMV20 Laser Diode Regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 102b2a0..9e382b5 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -128,6 +128,7 @@ obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o
obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o
obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
+obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
obj-$(CONFIG_REGULATOR_RTQ6752) += rtq6752-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
diff --git a/drivers/regulator/rtq2134-regulator.c b/drivers/regulator/rtq2134-regulator.c
new file mode 100644
index 00000000..e09419c
--- /dev/null
+++ b/drivers/regulator/rtq2134-regulator.c
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+enum {
+ RTQ2134_IDX_BUCK1 = 0,
+ RTQ2134_IDX_BUCK2,
+ RTQ2134_IDX_BUCK3,
+ RTQ2134_IDX_MAX
+};
+
+#define RTQ2134_AUTO_MODE 0
+#define RTQ2134_FCCM_MODE 1
+
+#define RTQ2134_BUCK_DVS0_CTRL 0
+#define RTQ2134_BUCK_VSEL_CTRL 2
+
+#define RTQ2134_REG_IO_CHIPNAME 0x01
+#define RTQ2134_REG_FLT_RECORDTEMP 0x13
+#define RTQ2134_REG_FLT_RECORDBUCK(_id) (0x14 + (_id))
+#define RTQ2134_REG_FLT_BUCKCTRL(_id) (0x37 + (_id))
+#define RTQ2134_REG_BUCK1_CFG0 0x42
+#define RTQ2134_REG_BUCK1_DVS0CFG1 0x48
+#define RTQ2134_REG_BUCK1_DVS0CFG0 0x49
+#define RTQ2134_REG_BUCK1_DVS1CFG1 0x4A
+#define RTQ2134_REG_BUCK1_DVS1CFG0 0x4B
+#define RTQ2134_REG_BUCK1_DVSCFG 0x52
+#define RTQ2134_REG_BUCK1_RSPCFG 0x54
+#define RTQ2134_REG_BUCK2_CFG0 0x5F
+#define RTQ2134_REG_BUCK2_DVS0CFG1 0x62
+#define RTQ2134_REG_BUCK2_DVS0CFG0 0x63
+#define RTQ2134_REG_BUCK2_DVS1CFG1 0x64
+#define RTQ2134_REG_BUCK2_DVS1CFG0 0x65
+#define RTQ2134_REG_BUCK2_DVSCFG 0x6C
+#define RTQ2134_REG_BUCK2_RSPCFG 0x6E
+#define RTQ2134_REG_BUCK3_CFG0 0x79
+#define RTQ2134_REG_BUCK3_DVS0CFG1 0x7C
+#define RTQ2134_REG_BUCK3_DVS0CFG0 0x7D
+#define RTQ2134_REG_BUCK3_DVS1CFG1 0x7E
+#define RTQ2134_REG_BUCK3_DVS1CFG0 0x7F
+#define RTQ2134_REG_BUCK3_DVSCFG 0x86
+#define RTQ2134_REG_BUCK3_RSPCFG 0x88
+#define RTQ2134_REG_BUCK3_SLEWCTRL 0x89
+
+#define RTQ2134_VOUT_MAXNUM 256
+#define RTQ2134_VOUT_MASK 0xFF
+#define RTQ2134_VOUTEN_MASK BIT(0)
+#define RTQ2134_ACTDISCHG_MASK BIT(0)
+#define RTQ2134_RSPUP_MASK GENMASK(6, 4)
+#define RTQ2134_FCCM_MASK BIT(5)
+#define RTQ2134_UVHICCUP_MASK BIT(3)
+#define RTQ2134_BUCKDVS_CTRL_MASK GENMASK(1, 0)
+#define RTQ2134_CHIPOT_MASK BIT(2)
+#define RTQ2134_BUCKOV_MASK BIT(5)
+#define RTQ2134_BUCKUV_MASK BIT(4)
+
+struct rtq2134_regulator_desc {
+ struct regulator_desc desc;
+ /* Extension for proprietary register and mask */
+ unsigned int mode_reg;
+ unsigned int mode_mask;
+ unsigned int suspend_enable_reg;
+ unsigned int suspend_enable_mask;
+ unsigned int suspend_vsel_reg;
+ unsigned int suspend_vsel_mask;
+ unsigned int suspend_mode_reg;
+ unsigned int suspend_mode_mask;
+ unsigned int dvs_ctrl_reg;
+};
+
+static int rtq2134_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct rtq2134_regulator_desc *desc =
+ (struct rtq2134_regulator_desc *)rdev->desc;
+ unsigned int val;
+
+ if (mode == REGULATOR_MODE_NORMAL)
+ val = RTQ2134_AUTO_MODE;
+ else if (mode == REGULATOR_MODE_FAST)
+ val = RTQ2134_FCCM_MODE;
+ else
+ return -EINVAL;
+
+ val <<= ffs(desc->mode_mask) - 1;
+ return regmap_update_bits(rdev->regmap, desc->mode_reg, desc->mode_mask,
+ val);
+}
+
+static unsigned int rtq2134_buck_get_mode(struct regulator_dev *rdev)
+{
+ struct rtq2134_regulator_desc *desc =
+ (struct rtq2134_regulator_desc *)rdev->desc;
+ unsigned int mode;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, desc->mode_reg, &mode);
+ if (ret)
+ return ret;
+
+ if (mode & desc->mode_mask)
+ return REGULATOR_MODE_FAST;
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int rtq2134_buck_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+ struct rtq2134_regulator_desc *desc =
+ (struct rtq2134_regulator_desc *)rdev->desc;
+ int sel;
+
+ sel = regulator_map_voltage_linear_range(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
+
+ sel <<= ffs(desc->suspend_vsel_mask) - 1;
+
+ return regmap_update_bits(rdev->regmap, desc->suspend_vsel_reg,
+ desc->suspend_vsel_mask, sel);
+}
+
+static int rtq2134_buck_set_suspend_enable(struct regulator_dev *rdev)
+{
+ struct rtq2134_regulator_desc *desc =
+ (struct rtq2134_regulator_desc *)rdev->desc;
+ unsigned int val = desc->suspend_enable_mask;
+
+ return regmap_update_bits(rdev->regmap, desc->suspend_enable_reg,
+ desc->suspend_enable_mask, val);
+}
+
+static int rtq2134_buck_set_suspend_disable(struct regulator_dev *rdev)
+{
+ struct rtq2134_regulator_desc *desc =
+ (struct rtq2134_regulator_desc *)rdev->desc;
+
+ return regmap_update_bits(rdev->regmap, desc->suspend_enable_reg,
+ desc->suspend_enable_mask, 0);
+}
+
+static int rtq2134_buck_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct rtq2134_regulator_desc *desc =
+ (struct rtq2134_regulator_desc *)rdev->desc;
+ unsigned int val;
+
+ if (mode == REGULATOR_MODE_NORMAL)
+ val = RTQ2134_AUTO_MODE;
+ else if (mode == REGULATOR_MODE_FAST)
+ val = RTQ2134_FCCM_MODE;
+ else
+ return -EINVAL;
+
+ val <<= ffs(desc->suspend_mode_mask) - 1;
+ return regmap_update_bits(rdev->regmap, desc->suspend_mode_reg,
+ desc->suspend_mode_mask, val);
+}
+
+static int rtq2134_buck_get_error_flags(struct regulator_dev *rdev,
+ unsigned int *flags)
+{
+ int rid = rdev_get_id(rdev);
+ unsigned int chip_error, buck_error, events = 0;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, RTQ2134_REG_FLT_RECORDTEMP,
+ &chip_error);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to get chip error flag\n");
+ return ret;
+ }
+
+ ret = regmap_read(rdev->regmap, RTQ2134_REG_FLT_RECORDBUCK(rid),
+ &buck_error);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to get buck error flag\n");
+ return ret;
+ }
+
+ if (chip_error & RTQ2134_CHIPOT_MASK)
+ events |= REGULATOR_ERROR_OVER_TEMP;
+
+ if (buck_error & RTQ2134_BUCKUV_MASK)
+ events |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+ if (buck_error & RTQ2134_BUCKOV_MASK)
+ events |= REGULATOR_ERROR_REGULATION_OUT;
+
+ *flags = events;
+ return 0;
+}
+
+static const struct regulator_ops rtq2134_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
+ .set_mode = rtq2134_buck_set_mode,
+ .get_mode = rtq2134_buck_get_mode,
+ .set_suspend_voltage = rtq2134_buck_set_suspend_voltage,
+ .set_suspend_enable = rtq2134_buck_set_suspend_enable,
+ .set_suspend_disable = rtq2134_buck_set_suspend_disable,
+ .set_suspend_mode = rtq2134_buck_set_suspend_mode,
+ .get_error_flags = rtq2134_buck_get_error_flags,
+};
+
+static const struct linear_range rtq2134_buck_vout_ranges[] = {
+ REGULATOR_LINEAR_RANGE(300000, 0, 200, 5000),
+ REGULATOR_LINEAR_RANGE(1310000, 201, 255, 10000)
+};
+
+static unsigned int rtq2134_buck_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case RTQ2134_AUTO_MODE:
+ return REGULATOR_MODE_NORMAL;
+ case RTQ2134_FCCM_MODE:
+ return REGULATOR_MODE_FAST;
+ }
+
+ return REGULATOR_MODE_INVALID;
+}
+
+static int rtq2134_buck_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ struct rtq2134_regulator_desc *rdesc =
+ (struct rtq2134_regulator_desc *)desc;
+ int rid = desc->id;
+ bool uv_shutdown, vsel_dvs;
+ unsigned int val;
+ int ret;
+
+ vsel_dvs = of_property_read_bool(np, "richtek,use-vsel-dvs");
+ if (vsel_dvs)
+ val = RTQ2134_BUCK_VSEL_CTRL;
+ else
+ val = RTQ2134_BUCK_DVS0_CTRL;
+
+ ret = regmap_update_bits(cfg->regmap, rdesc->dvs_ctrl_reg,
+ RTQ2134_BUCKDVS_CTRL_MASK, val);
+ if (ret)
+ return ret;
+
+ uv_shutdown = of_property_read_bool(np, "richtek,uv-shutdown");
+ if (uv_shutdown)
+ val = 0;
+ else
+ val = RTQ2134_UVHICCUP_MASK;
+
+ return regmap_update_bits(cfg->regmap, RTQ2134_REG_FLT_BUCKCTRL(rid),
+ RTQ2134_UVHICCUP_MASK, val);
+}
+
+static const unsigned int rtq2134_buck_ramp_delay_table[] = {
+ 0, 16000, 0, 8000, 4000, 2000, 1000, 500
+};
+
+#define RTQ2134_BUCK_DESC(_id) { \
+ .desc = { \
+ .name = "rtq2134_buck" #_id, \
+ .of_match = of_match_ptr("buck" #_id), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = RTQ2134_IDX_BUCK##_id, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .ops = &rtq2134_buck_ops, \
+ .n_voltages = RTQ2134_VOUT_MAXNUM, \
+ .linear_ranges = rtq2134_buck_vout_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(rtq2134_buck_vout_ranges), \
+ .vsel_reg = RTQ2134_REG_BUCK##_id##_DVS0CFG1, \
+ .vsel_mask = RTQ2134_VOUT_MASK, \
+ .enable_reg = RTQ2134_REG_BUCK##_id##_DVS0CFG0, \
+ .enable_mask = RTQ2134_VOUTEN_MASK, \
+ .active_discharge_reg = RTQ2134_REG_BUCK##_id##_CFG0, \
+ .active_discharge_mask = RTQ2134_ACTDISCHG_MASK, \
+ .ramp_reg = RTQ2134_REG_BUCK##_id##_RSPCFG, \
+ .ramp_mask = RTQ2134_RSPUP_MASK, \
+ .ramp_delay_table = rtq2134_buck_ramp_delay_table, \
+ .n_ramp_values = ARRAY_SIZE(rtq2134_buck_ramp_delay_table), \
+ .of_map_mode = rtq2134_buck_of_map_mode, \
+ .of_parse_cb = rtq2134_buck_of_parse_cb, \
+ }, \
+ .mode_reg = RTQ2134_REG_BUCK##_id##_DVS0CFG0, \
+ .mode_mask = RTQ2134_FCCM_MASK, \
+ .suspend_mode_reg = RTQ2134_REG_BUCK##_id##_DVS1CFG0, \
+ .suspend_mode_mask = RTQ2134_FCCM_MASK, \
+ .suspend_enable_reg = RTQ2134_REG_BUCK##_id##_DVS1CFG0, \
+ .suspend_enable_mask = RTQ2134_VOUTEN_MASK, \
+ .suspend_vsel_reg = RTQ2134_REG_BUCK##_id##_DVS1CFG1, \
+ .suspend_vsel_mask = RTQ2134_VOUT_MASK, \
+ .dvs_ctrl_reg = RTQ2134_REG_BUCK##_id##_DVSCFG, \
+}
+
+static const struct rtq2134_regulator_desc rtq2134_regulator_descs[] = {
+ RTQ2134_BUCK_DESC(1),
+ RTQ2134_BUCK_DESC(2),
+ RTQ2134_BUCK_DESC(3)
+};
+
+static bool rtq2134_is_accissible_reg(struct device *dev, unsigned int reg)
+{
+ if (RTQ2134_REG_IO_CHIPNAME <= reg && reg <= RTQ2134_REG_BUCK3_SLEWCTRL)
+ return true;
+ return false;
+}
+
+static const struct regmap_config rtq2134_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RTQ2134_REG_BUCK3_SLEWCTRL,
+
+ .readable_reg = rtq2134_is_accissible_reg,
+ .writeable_reg = rtq2134_is_accissible_reg,
+};
+
+static int rtq2134_probe(struct i2c_client *i2c)
+{
+ struct regmap *regmap;
+ struct regulator_dev *rdev;
+ struct regulator_config regulator_cfg= {};
+ int i;
+
+ regmap = devm_regmap_init_i2c(i2c, &rtq2134_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&i2c->dev, "Failed to allocate regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ regulator_cfg.dev = &i2c->dev;
+ regulator_cfg.regmap = regmap;
+ for (i = 0; i < ARRAY_SIZE(rtq2134_regulator_descs); i++) {
+ rdev = devm_regulator_register(&i2c->dev,
+ &rtq2134_regulator_descs[i].desc,
+ ®ulator_cfg);
+ if (IS_ERR(rdev)) {
+ dev_err(&i2c->dev, "Failed to init %d regulator\n", i);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id __maybe_unused rtq2134_device_tables[] = {
+ { .compatible = "richtek,rtq2134", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rtq2134_device_tables);
+
+static struct i2c_driver rtq2134_driver = {
+ .driver = {
+ .name = "rtq2134",
+ .of_match_table = rtq2134_device_tables,
+ },
+ .probe_new = rtq2134_probe,
+};
+module_i2c_driver(rtq2134_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <[email protected]>");
+MODULE_DESCRIPTION("Richtek RTQ2134 Regulator Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
On Fri, 16 Jul 2021 16:03:55 +0800, cy_huang wrote:
> Add binding document for Richtek RTQ2134 SubPMIC.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[1/2] regulator: rtq2134: Add binding document for Richtek RTQ2134 SubPMIC
commit: 4c922fd3d6fa4d51e1f5bb845548cbefd5de3d14
[2/2] regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC
commit: 0555d41497de66d2f07ae36dcb46a32f0ff90d8d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark