From: "H. Peter Anvin (Intel)" <[email protected]>
Some versions of mtools (fixed somewhere between 4.0.31 and 4.0.35)
generates bad output for mformat when used with the partition=
option. Use the offset= option instead, but we *also* need an
mtools.conf entry with partition= to support mpartition; combining
them in one entry does not work either.
Don't specify the -t option to mpartition; it is unnecessary and seems
to confuse mpartition under some circumstances.
Also do a few minor optimizations:
Use a larger cluster size; there is no reason for the typical 4K
clusters when we are dealing mainly with comparatively huge files.
Start the partition at 32K. There is no reason to align it more than
that, since the internal FAT filesystem structures will at best be
cluster-aligned, and 32K is the maximum FAT cluster size.
Signed-off-by: H. Peter Anvin (Intel) <[email protected]>
---
arch/x86/boot/genimage.sh | 15 ++++++++-------
arch/x86/boot/mtools.conf.in | 5 +++--
2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/arch/x86/boot/genimage.sh b/arch/x86/boot/genimage.sh
index 0673fdfc1a11..c9299aeb7333 100644
--- a/arch/x86/boot/genimage.sh
+++ b/arch/x86/boot/genimage.sh
@@ -120,12 +120,13 @@ efiarch() {
}
# Get the combined sizes in bytes of the files given, counting sparse
-# files as full length, and padding each file to a 4K block size
+# files as full length, and padding each file to cluster size
+cluster=16384
filesizes() {
local t=0
local s
for s in $(ls -lnL "$@" 2>/dev/null | awk '/^-/{ print $5; }'); do
- t=$((t + ((s+4095)/4096)*4096))
+ t=$((t + ((s+cluster-1)/cluster)*cluster))
done
echo $t
}
@@ -230,14 +231,14 @@ genhdimage() {
ptype='-T 0xef' # EFI system partition, no GPT
fi
sizes=$(filesizes "$FBZIMAGE" "${FDINITRDS[@]}" "$efishell")
- # Allow 1% + 1 MiB for filesystem and partition table overhead,
- # syslinux, and config files
+ # Allow 1% + 2 MiB for filesystem and partition table overhead,
+ # syslinux, and config files; this is probably excessive...
megs=$(((sizes + sizes/100 + 2*1024*1024 - 1)/(1024*1024)))
$dd if=/dev/zero of="$FIMAGE" bs=$((1024*1024)) count=$megs 2>/dev/null
- mpartition -I -c -s 32 -h 64 -t $megs $ptype -b 512 -a h:
+ mpartition -I -c -s 32 -h 64 $ptype -b 64 -a p:
$dd if="$mbr" of="$FIMAGE" bs=440 count=1 conv=notrunc 2>/dev/null
- mformat -v 'LINUX_BOOT' -s 32 -h 64 -t $megs h:
- syslinux --offset $((512*512)) "$FIMAGE"
+ mformat -v 'LINUX_BOOT' -s 32 -h 64 -c $((cluster/512)) -t $megs h:
+ syslinux --offset $((64*512)) "$FIMAGE"
do_mcopy h:
}
diff --git a/arch/x86/boot/mtools.conf.in b/arch/x86/boot/mtools.conf.in
index 9e2662d01364..174c60508766 100644
--- a/arch/x86/boot/mtools.conf.in
+++ b/arch/x86/boot/mtools.conf.in
@@ -14,7 +14,8 @@ drive v:
drive w:
file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
-# Hard disk
+# Hard disk (h: for the filesystem, p: for format - old mtools bug?)
drive h:
+ file="@OBJ@/hdimage" offset=32768 mformat_only
+drive p:
file="@OBJ@/hdimage" partition=1 mformat_only
-
--
2.31.1
The following commit has been merged into the x86/build branch of tip:
Commit-ID: 067595d728179219c120dd50b4dc711e92f1eb16
Gitweb: https://git.kernel.org/tip/067595d728179219c120dd50b4dc711e92f1eb16
Author: H. Peter Anvin (Intel) <[email protected]>
AuthorDate: Fri, 10 Sep 2021 17:39:06 -07:00
Committer: Borislav Petkov <[email protected]>
CommitterDate: Wed, 29 Sep 2021 11:06:47 +02:00
x86/boot: Fix make hdimage with older versions of mtools
Some versions of mtools (fixed somewhere between 4.0.31 and 4.0.35)
generate bad output for mformat when used with the partition= option.
Use the offset= option instead. An mtools.conf entry is *also* needed
with partition= to support mpartition; combining them in one entry does
not work either.
Don't specify the -t option to mpartition; it is unnecessary and seems
to confuse mpartition under some circumstances.
Also do a few minor optimizations:
Use a larger cluster size; there is no reason for the typical 4K
clusters when we are dealing mainly with comparatively huge files.
Start the partition at 32K. There is no reason to align it more than
that, since the internal FAT filesystem structures will at best be
cluster-aligned, and 32K is the maximum FAT cluster size.
[ bp: Remove "we". ]
Signed-off-by: H. Peter Anvin (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
---
arch/x86/boot/genimage.sh | 15 ++++++++-------
arch/x86/boot/mtools.conf.in | 5 +++--
2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/arch/x86/boot/genimage.sh b/arch/x86/boot/genimage.sh
index 0673fdf..c9299ae 100644
--- a/arch/x86/boot/genimage.sh
+++ b/arch/x86/boot/genimage.sh
@@ -120,12 +120,13 @@ efiarch() {
}
# Get the combined sizes in bytes of the files given, counting sparse
-# files as full length, and padding each file to a 4K block size
+# files as full length, and padding each file to cluster size
+cluster=16384
filesizes() {
local t=0
local s
for s in $(ls -lnL "$@" 2>/dev/null | awk '/^-/{ print $5; }'); do
- t=$((t + ((s+4095)/4096)*4096))
+ t=$((t + ((s+cluster-1)/cluster)*cluster))
done
echo $t
}
@@ -230,14 +231,14 @@ genhdimage() {
ptype='-T 0xef' # EFI system partition, no GPT
fi
sizes=$(filesizes "$FBZIMAGE" "${FDINITRDS[@]}" "$efishell")
- # Allow 1% + 1 MiB for filesystem and partition table overhead,
- # syslinux, and config files
+ # Allow 1% + 2 MiB for filesystem and partition table overhead,
+ # syslinux, and config files; this is probably excessive...
megs=$(((sizes + sizes/100 + 2*1024*1024 - 1)/(1024*1024)))
$dd if=/dev/zero of="$FIMAGE" bs=$((1024*1024)) count=$megs 2>/dev/null
- mpartition -I -c -s 32 -h 64 -t $megs $ptype -b 512 -a h:
+ mpartition -I -c -s 32 -h 64 $ptype -b 64 -a p:
$dd if="$mbr" of="$FIMAGE" bs=440 count=1 conv=notrunc 2>/dev/null
- mformat -v 'LINUX_BOOT' -s 32 -h 64 -t $megs h:
- syslinux --offset $((512*512)) "$FIMAGE"
+ mformat -v 'LINUX_BOOT' -s 32 -h 64 -c $((cluster/512)) -t $megs h:
+ syslinux --offset $((64*512)) "$FIMAGE"
do_mcopy h:
}
diff --git a/arch/x86/boot/mtools.conf.in b/arch/x86/boot/mtools.conf.in
index 9e2662d..174c605 100644
--- a/arch/x86/boot/mtools.conf.in
+++ b/arch/x86/boot/mtools.conf.in
@@ -14,7 +14,8 @@ drive v:
drive w:
file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
-# Hard disk
+# Hard disk (h: for the filesystem, p: for format - old mtools bug?)
drive h:
+ file="@OBJ@/hdimage" offset=32768 mformat_only
+drive p:
file="@OBJ@/hdimage" partition=1 mformat_only
-